DOCSLIB.ORG

Arris DG3450

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Arris DG3450 Touchstone Release AR01.1 Firmware Guide STANDARD Revision 1.0 January 2018 © 2018 ARRIS Enterprises LLC. All Rights Reserved. Touchstone® AR01.1 Firmware Guide STANDARD 1.0 ARRIS Copyrights and Trademarks © 2018 ARRIS Enterprises LLC. All Rights Reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from ARRIS Enterprises LLC. (“ARRIS”). ARRIS reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of ARRIS to provide notification of such revision or change. ARRIS and the ARRIS logo are all trademarks of ARRIS Enterprises LLC. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks or the names of their products. ARRIS disclaims proprietary interest in the marks and names of others. ARRIS provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. ARRIS may make improvements or changes in the product(s) described in this manual at any time. The capabilities, system requirements and/or compatibility with third-party products described herein are subject to change without notice. Table of Contents 1. Overview .............................................................................................................. 14 About This Manual........................................................................................................... 14 Supported Hardware ....................................................................................................... 15 Firmware Functionality .................................................................................................... 15 Standards Compliance ..................................................................................................... 16 Standard Functionality ............................................................................................ 16 Optional Functionality ............................................................................................ 16 DOCSIS Specifications ............................................................................................. 16 CableLabs IPv6 Specifications ................................................................................. 17 DOCSIS 3.1 Security Overview ................................................................................ 17 Load Name Extensions..................................................................................................... 17 2. DOCSIS Provisioning .............................................................................................. 19 General Provisioning Information ................................................................................... 19 Service Flow Limitations ......................................................................................... 19 OUI Ranges .............................................................................................................. 19 Configuring ToD Offset ........................................................................................... 19 Setting the DST Policy ............................................................................................. 19 Clearing the CPE List ............................................................................................... 20 Provisioning Considerations ............................................................................................ 20 Interface Index Scheme .......................................................................................... 20 Configuration File Provisioning Notes .................................................................... 22 Support for TLV-41 (Downstream Channel Lists) ................................................... 22 Persistence .............................................................................................................. 22 Cable Modem Interface Mask................................................................................. 23 CM DHCP Interactions ..................................................................................................... 23 DHCP Option 51 Support ........................................................................................ 24 DHCP Option 60 Support ........................................................................................ 24 Dual-Mode Operation...................................................................................................... 24 Forcing Provisioning Mode and Certificates ........................................................... 24 Configuration Files and Signed Loads ..................................................................... 25 Certificates .............................................................................................................. 25 DMDM Status .......................................................................................................... 25 Overriding the MDD IPv4/IPv6 Selection ........................................................................ 25 Displaying the MDD Setting .................................................................................... 26 Configuring Extended Upstream Transmit Power ........................................................... 26 Upgrading Touchstone Firmware .................................................................................... 26 STANDARD Revision 1.0 Touchstone Release AR01.1 Firmware Guide © 2018 ARRIS Enterprises LLC. All Rights Reserved. 3 Action ...................................................................................................................... 26 Upgrading the Firmware through Provisioning ...................................................... 27 Upgrading the Firmware through SNMP ................................................................ 27 Configuring Channel Bonding Characteristics ................................................................. 28 Action ...................................................................................................................... 28 IPv6 Provisioning Notes ................................................................................................... 28 IPv6 Provisioning Modes ......................................................................................... 28 Selecting an Addressing Mode................................................................................ 28 DHCP Behavior for IPv6 Provisioning ...................................................................... 29 Provisioning File Notes............................................................................................ 30 TLV-38 Enhancements ............................................................................................ 30 Configuring the Diplexer .................................................................................................. 30 3. NCS Voice Provisioning .......................................................................................... 32 NCS Provisioning Considerations ..................................................................................... 32 About IPsec ............................................................................................................. 32 Call Management Servers ....................................................................................... 32 Voice and Signaling Ports ........................................................................................ 32 eDVA Interface Table .............................................................................................. 33 Provisioning Modes ......................................................................................................... 33 PacketCable Provisioning Modes ............................................................................ 33 Verifying eDVA Provisioning and Endpoint Status .................................................. 36 DHCP Support by Provisioning Mode .............................................................................. 36 Options Required in All Provisioning Modes .......................................................... 36 PacketCable Modes ................................................................................................ 37 eDVA DHCP Interactions .................................................................................................. 38 DHCP Option 43 Support ........................................................................................ 38 DHCP Option 51 Support ........................................................................................ 38 Disabling Option 122 Sub-Option 3 Enforcement .................................................. 39 Provisioning Quality of Service ........................................................................................ 39 Full DQoS Mode ...................................................................................................... 39 DSX QoS Mode ........................................................................................................ 39 Feature Switches ............................................................................................................. 40 CallP Feature Switch ..............................................................................................
Load more

Recommended publications
  • Catv Cabling System
    NYULMC AMBULATORY CARE CENTER – FIT-OUT PHASE 1 Perkins & Will Architects PC 222 E 41st ST, NYC Project: 032698.000 Issued for GMP March 15, 2017 SECTION 27 41 33 CATV CABLING PART 1 - GENERAL 1.1 SYSTEM DESCRIPTION A. Furnish and install a complete and fully operational Television Signal Distribution System capable of delivering up to 158 video channels (6 MHz NTSC Channels containing NTSC, ATSC and QAM modulated programs) and IP Video over an installed Category 6A unshielded twisted pair cable system. The System shall utilize a cable plant comprised of a TIA/EIA 568 compliant horizontal distribution cable system and a coaxial and/or single mode fiber backbone system. The System shall employ Active Automatic Gain Control Electronics to adjust the video signal levels to each TV and shall be capable of supporting up to 14,000 connected devices. The System shall support bi-directional RF transmission for backbone interconnections. Include amplifiers, power supplies, cables, outlets, attenuators, hubs, baluns, adaptors, transceivers, and other parts necessary for the reception and distribution of the local CATV signals. Back-feed existing campus system. (CAT 5e is acceptable to 117 channels) B. Distribute cable channels to TV outlets to permit simple connection of EIA standard Analog/Digital television receivers. C. Deliver at outlets monochrome and NTSC color television signals without introducing noticeable effect on picture and color fidelity or sound. Signal levels and performance shall meet or exceed the minimums specified in Part 76 of the FCC Rules and Regulations D. Provide reception quality at each outlet equal to or better than that received in the area with individual antennas.
    [Show full text]
  • Compact UWB Slotted Monopole Antenna with Diplexer for Simultaneous Microwave Energy Harvesting and Data Communication Applications
    Progress In Electromagnetics Research C, Vol. 109, 169–186, 2021 Compact UWB Slotted Monopole Antenna with Diplexer for Simultaneous Microwave Energy Harvesting and Data Communication Applications Geriki Polaiah*, Krishnamoorthy Kandasamy, and Muralidhar Kulkarni Abstract—This paper proposes a new integration of compact ultra-wideband (UWB) slotted monopole antenna with a diplexer and rectifier for simultaneous energy harvesting and data communication applications. The antenna is composed of four symmetrical circularly slotted patches, a feed line, and a ground plane. A slotline open loop resonator based diplexer is implemented to separate the required signal from the antenna without extra matching circuit. A microwave rectifier based on the voltage doubler topology is designed for RF energy harvesting. The prototypes of the proposed antenna, diplexer, and rectifier are fabricated, measured, and compared with the simulation results. The measurement results show that the fractional impedance bandwidth of proposed UWB antenna reaches 149.7% (2.1 GHz–14.6 GHz); the diplexer minimum insertion losses (|S21|, |S31|) are 1.37 dB and 1.42 dB at passband frequencies; the output isolation (|S23|) is better than 30 dB from 1 GHz to 5 GHz; and the peak RF-DC conversion efficiency of the rectifier is 32.8% at an input power of −5dBm. The overall performance of the antenna with a diplexer and rectifier is also studied, and it is found that the proposed new configuration is suitable for simultaneous microwave energy harvesting and data communication applications. 1. INTRODUCTION Simultaneous wireless power transmission and communication is a promising technology that is intended to transmit power in free-space without wires and also provides data communication.
    [Show full text]
  • Multi-Coupled Resonator Microwave Diplexer with High Isolation
    Proceedings of the 46th European Microwave Conference Multi-Coupled Resonator Microwave Diplexer with High Isolation Augustine O. Nwajana, Kenneth S. K. Yeo Department of Electrical and Electronic Engineering University of East London London, UK [email protected] Abstract—A microwave diplexer achieved by coupling a dual- and dual-band filter (DBF) design [7], engineers can achieve band bandpass filter onto two single-bands (transmit, Tx and diplexers purely based on existing formulations rather than receive, Rx) bandpass filters is presented. This design eliminates developing complex optimisation algorithm to achieve the the need for employing external junctions in diplexer design, as same function. Also, since the resultant diplexer in this paper is opposed to the conventional design approach which requires formed by coupling a section of the BPF resonators, onto a th separate junctions for energy distribution. A 10-pole (10 order) section of the DBF resonators, a reduced sized diplexer is diplexer has been successfully designed, simulated, fabricated achieved. This is because the energy distributing resonators and measured. The diplexer is composed of 2 poles from the dual- (that is, the two DBF resonators), contribute one resonant pole band filter, 4 poles from the Tx bandpass filter, and the to the diplexer Tx channel and one resonant pole to the diplexer remaining 4 poles from the Rx bandpass filter. The design was implemented using asynchronously tuned microstrip square Rx channel. Therefore, the large size issue with the open-loop resonators. The simulation and measurement results conventional diplexer design can be avoided, as external show that an isolation of 50 dB is achieved between the diplexer junctions (or external/common resonator) are not required.
    [Show full text]
  • Model-Based Vector-Fitting Method for Circuit Model Extraction of Coupled-Resonator Diplexers Ping Zhao, Student Member, IEEE, and Ke-Li Wu, Fellow, IEEE
    IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, VOL. 64, NO. 6, JUNE 2016 1787 Model-Based Vector-Fitting Method for Circuit Model Extraction of Coupled-Resonator Diplexers Ping Zhao, Student Member, IEEE, and Ke-Li Wu, Fellow, IEEE Abstract— In this paper, a novel rational function approxi- In mass production of such microwave devices, the physical mation method, namely, model-based vector fitting (MVF), is realization is highly sensitive to the dimensional tolerance of proposed for accurate extraction of the characteristic functions the resonators as well as the coupling elements. Therefore, of a coupled-resonator diplexer with a resonant type of junction from noise-contaminated measurement data. MVF inherits all the manual tuning is necessary in the production process to meet merits of the vector-fitting (VF) method and can also stipulate the stringent system specifications. Traditionally, the tuning the order of the numerator of the model. Thus, MVF is suitable is accomplished by skilled technologists through consecutive for the high-order diplexer system identification problem against manual adjustments based on their years of accumulated measurement noise. With the extracted characteristic functions, experience. Tuning a coupled-resonator device with a complex a three-port transversal coupling matrix of a diplexer can be synthesized. A matrix orthogonal transformation strategy is also coupling topology is a demanding, time-consuming, and costly proposed to transform the obtained transversal matrix to a target process. A computer-aided tuning (CAT) tool that can identify coupling matrix configuration, whose entries have one-to-one those unsatisfying coupling values and deterministically guide relationship with the physical tuning elements.
    [Show full text]
  • Mantchingpost
    ANALYSIS AND SYNTHESIS OF MILLIMETRIC E-PLANE DIPLEXERS IN RECTANGULAR WAVEGUIDE -Antonio Morini, Tullio Rozzi Dipartimento di Elettronica e Automatica, Universitk di Ancona ABSTRACI A novel E-plane diplexer is proposed and discussed. Its feature is the matching section of the three-port junction, obtained by means of an E-plane septum, realized on the same mask as the branching filters and placed in the cavity of an abrupt E- plane junction. The latter is designed-in such-a way that, when combine d with two,reasbnably 7good filters, separately designed and suitably positioned, the resulting diplexer gives good performances without further optimization. This design technique, based on the properties of the scattering parameters of a reciprocal lossless three-portjunction, is , as such, of general validity and easily extended to other structures. INTRQD_UCTION The more expensive part of an E-plane circuit in rectangular waveguide for millimetric application is its housing. In fact, its fabrication requires high precision milling machines and it is difficult to: reduce tolerances below 10 t for each half housing. Therefore, it becomes important to simplify as much as possible the housing geometry, even increasing the complexity of the mask. For this reason, we study an E-plane diplexer based on an abrupt three-portjunction, in lieu of a tapered junction, Dittlof and Andt- (1-2), Vahldieck and Varailhon- de la Filolie(3), requiring more expensive mechanical construction. The junction is tuned by a single inductive post, built on the same mask as the E-plane filters and placed between the junction and the bifurcation, as shown in fig.1, Morini et al.
    [Show full text]
  • (12) United States Patent (10) Patent No.: US 7,593,639 B2 Farmer Et Al
    US007593639B2 (12) United States Patent (10) Patent No.: US 7,593,639 B2 Farmer et al. (45) Date of Patent: Sep. 22, 2009 (54) METHOD AND SYSTEM FOR PROVIDINGA 4.495,545 A 1/1985 Dufresne et al. RETURN PATH FOR SIGNALS GENERATED 4,500,990 A 2f1985 Akashi BY LEGACY TERMINALS IN AN OPTICAL (Continued) NETWORK (75) FOREIGN PATENT DOCUMENTS Inventors: James O. Farmer, Lilburn, GA (US); John J. Kenny, Suwanee, GA (US); CA 2107922 A1 4, 1995 Patrick W. Quinn, Lafayette, CA (US); (Continued) Deven J. Anthony, Tampa, FL (US) OTHER PUBLICATIONS (73) Assignee: Enablence USA FTTX Networks Inc., Title: Spectral Grids for WDM Applications: CWDM Wavelength Alpharetta, GA (US) Grid, Publ: International Telecommunications Union, pp. i-iii and 1-4, Date: Dec. 1, 2003. (*) Notice: Subject to any disclaimer, the term of this patent is extended or adjusted under 35 (Continued) U.S.C. 154(b) by 0 days. Primary Examiner Agustin Bello (74) Attorney, Agent, or Firm—Sentry Law Group; Steven P. (21) Appl. No.: 11/654,392 Wigmore (65) Prior Publication Data A return path system includes inserting RF packets between US 2007/0223928A1 Sep. 27, 2007 regular upstream data packets, where the data packets are generated by communication devices such as a computer or Related U.S. Application Data internet telephone. The RF packets can be derived from ana log RF signals that are produced by legacy video service (63) Continuation of application No. 10,041,299, filed on terminals. In this way, the present invention can provide an Jan. 8, 2002, now Pat.
    [Show full text]
  • Digital Audio for NTSC Television
    Digital Audio for NTSC Television Craig C. Todd Dolby Laboratories San Francisco 0. Abstract A previously proposed method of adding a digital similarities between B-PAL and M-NTSC indicated carrier to the NTSC broadcast channel was found to that the Scandinavian test results would apply in the be marginally compatible with adjacent channel U.S. Our original 1987 proposal was: operation. The technique also has some problems unique to broadcasters. Digital transmission A. QPSK carrier with alpha=0.7 filtering. techniques are reviewed, and a new set of digital transmission parameters are developed which are B. Carrier frequency 4.85 MHz above video thought to be optimum for digital sound with NTSC carrier. television. C. Carrier level -20 dB with respect to peak vision carrier level. I. Introduction Compatibility testing of that system has been It is very feasible to compatibly add digital audio to performed, and some television sets have been found the NTSC television signal as carried on cable on which the data carrier causes detectable television systems. Besides the marketing advantage interference to the upper adjacent video channel in a which can accompany the use of anything "digital", clean laboratory setting. It should be noted that with there are some real advantages to digital these problem sets, the FM aural carrier also caused broadcasting, especially where the transmission path noticeable interference to the upper adjacent picture. is imperfect. Digital transmission is inherently The interference from data occurs into luminance, robust. While the coding of high quality audio into and manifests itself as additive noise between digital form theoretically entails a loss of quality, approximately 1 MHz and 1.4 MHz.
    [Show full text]
  • Tvtransmitter 2/O.2 Kw Band Lll with Modulation at a Fixed Lf :T
    SIEMENS TVTransmitter 2/O.2 kW Band lll with modulation at a fixed lF :t Contents V l. Design ll. Features lll. Construction lV. Principles of Operation V. Electrical Data Vl. Scope ol Delivery rt v lssued by Bereich Bauelemente, Vertrieb, Balanstraße 73.8000 München 80 Terms of de lverv and riahts to chanse desisn reserved. l. Design fhe 2/O.2 kW VHF Band lll television transmitter consists Transmitter preamplifier stages up to an output power ot vof separate amplifier chains for the picture and sound approx. 1O W fitted with silicon transistors. signals with a combining network at the output. The pic- ture and sound pre stage with associated power supply Modulation at f ixed lF. is located in one cabinet together with the 2/0.2 kW out- For TV transmission in accordance with CCIR Recom- put stage with power supply and the diplexer in a second mendalions (625 lines, channel bandwidth 7 MHz). cabinet, the combining unit. lt is possible to house in picture this cabinet also some monitoring equipment. As Also available for FCC or OIRT standards. monitor, oscilloscope, switch point selector, sound de- modulator, Nyquist demodulator, but note this equipment Completely color-compatible for NTSC, PAL or SECAM is not part of the transmitter. standards. The standard version is designed for operation in accord- ance with the CCIR Recommendations (625 lines, T MHz channel bandwldth). lf required the transmitter can also be supplied to the FCC standard (525 lines, 6 MHz channel bandwidth), or OIRT standard (625 lines, S MHz channel lll. Construction For is fully bandwidth).
    [Show full text]
  • General Disclaimer One Or More of the Following Statements May Affect
    General Disclaimer One or more of the Following Statements may affect this Document This document has been reproduced from the best copy furnished by the organizational source. It is being released in the interest of making available as much information as possible. This document may contain data, which exceeds the sheet parameters. It was furnished in this condition by the organizational source and is the best copy available. This document may contain tone-on-tone or color graphs, charts and/or pictures, which have been reproduced in black and white. This document is paginated as submitted by the original source. Portions of this document are not fully legible due to the historical nature of some of the material. However, it is the best reproduction available from the original submission. Produced by the NASA Center for Aerospace Information (CASI) I GENII-ANNUAL STATUS REPORT (bA;,A — CL— 'a7 39 o4 ) ULStAULH 16 81LL1llLTEb 084 -34E57 IF 2ECbh4,U8S SV 51du L1Ud1 Status UUNULt, lid3 - Jul. 1984 (GeoLg1d inst. jL .) e5 hL AOl/ p t AU 1 CSCL dON U"C13f G3/J2 e4O24 RLSEARCH IN MILLIMETER WAVE TECHNIQUES NASA GRANT NO. 14SG-5012 GT/EES PROJECT NO. A-1642 R. E. Forsythe Project Di rector /Pr inc;pal Investigatcr L. R. Dod Project Monitor for NASA/GSFC ^I Report Period 15 July 1983 — 15 July 1984 wo L ^ ^ August 1984 GEORGIA INSTITUTE OF TECHNOLOGY ► A Unit of the University System of Georgia Engineering Experiment Station Atlanta, Georgia 30332 984 U ar a- v ,. w C 11 u J Semiannual Status Report o.
    [Show full text]
  • Rf Components
    RF COMPONENTS/ SYSTEMS PRODUCT CATALOG 2019 (Front Cover Photo) Unitized Constant Impedance Four channel UHF Adjacent Channel Constant Combiner & Patch Panel Impedance Combiner/Mask Filter System Installed at 10,200ft AMSL 2 JAMPRO ANTENNAS, INC.– Your Partner for DTV-DVB-T & HD Radio Solutions- the oldest, most experienced broadcast antenna company in North America with over 50 years of experience providing “Complete Turnkey Broadcast Systems.” ABOUT JAMPRO Jampro Antennas Inc., established in 1954 to answer the need for high quality broadcast systems with a cost effective solution. Jampro is a leading supplier of antennas, combiners & filters, towers and RF components for every application in the broadcast industry. Reputed for innovation and customization, Jampro builds each system to the specifications of each individual broadcaster. From the first system delivered to those installed today, Jampro is committed to consistent performance and quality founded on solid engineering. Today over 25,000 broadcasters worldwide benefit from the quality and performance provided by Jampro systems. CONTINUING THE TRADITION Engineering and manufacturing broadband multi channel systems for UHF/VHF/FM since 1967 and delivered more than 200 systems in the last 5 years. Delivered and installed the highest power broadband UHF systems including antennas, combiners, transmission line, and towers in Asia. One system rated for 320kW and three others operate at 240kW, 260kW, and 280kW. Major supplier for common transmission infrastructure projects in India. Supplying more than 75% of equipment for phase 1 and the largest number of sites for phase 2. True pioneer in the development and introduction of “Circular Polarization to TV.” Delivering 1st circularly polarized TV Antenna in the world and 1st 5MW circularly polarized UHF system.
    [Show full text]
  • Radio and Tv Broadcast Antennas
    BROADCAST ANTENNAS RADIO AND TV Summary 1 Front Cover 2 Summary 3 Introduction 4 Channels & Frequencies 5 Circular Polarization Tuned MY-Heliax FM Radio MY-Ciclone MY-Syren 6 Circular Polarization Broadband MY-TetraQ MY-TetraQ2 MY-TetraQ3 7 Circular Polarization High Power Panel MY-4DC 8 Vertical Polarization Dipole MY- Yinx- FM MY-FMPL MY-FMPL2 9 Vertical Polarization MY-GM MY-GM2Y MY-GM3Y 10 Vertical Polarization High Power Panel MY-BII Panel 11 Radio FM Splitters 12 Radio FM Filters 13 Radio FM Combiners 14 MY-1130 DAB MY-1150 MY-1180/90 15 MY-1140 MY-1170 MY-1160 16 DAB Splitters 17 DAB Filters 18 DAB Combiners 19 MY-BI Panel TV B I 20 MY-BIII 2D Panel TV BIII MY-BIII 4D Panel 21 2D BIII D Panel BIII yagi 22 Splitters BIII Filters BIII 23 Combiners BIII 24 MY-BIV/V 4 D Panel CI UHF BIV/V TV MY-BIV/V 4 D Panel 25 MY-YINX-N UHF 26 Splitters UHF 27 Filters UHF 28 Combiner UHF 29 MY-DVB Panel DVB 30 Splitters DVB 31 Filters DVB 32 Combiner DVB 33 Accessories Rigid Line Accesories Adapters Coaxial Connectors Directional Couplers 34 Address 2 Summary MOYANO is since 1960 the pioneer Company in the Spanish Radio Frequencies technology, basing its development in the design and construction of Antennas, Power devices and Telecommunication Towers. MOYANO is today the company that offers to their clients the best solutions in technology and Infrastructure for Broadcast Networks. The technological development based in the applied engineering facility is fully supported by a production group as well as installtion and maintenance division.
    [Show full text]
  • Frequency Diplexer Network for Wireless Parallel Data Transmission
    Frequency diplexer network for wireless parallel data transmission and ultrawideband systems utilizing manifold technique Imran Mohsin, Magnus Karlsson and Shaofang Gong The self-archived postprint version of this journal article is available at Linköping University Institutional Repository (DiVA): http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-109116 N.B.: When citing this work, cite the original publication. Mohsin, I., Karlsson, M., Gong, S., (2014), Frequency diplexer network for wireless parallel data transmission and ultrawideband systems utilizing manifold technique, Microwave and optical technology letters (Print), 56(8), 1869-1871. https://doi.org/10.1002/mop.28464 Original publication available at: https://doi.org/10.1002/mop.28464 Copyright: Wiley (12 months) http://eu.wiley.com/WileyCDA/ Frequency Diplexer Network for Wireless Parallel Data Transmission and Ultra-wideband Systems Utilizing Manifold Technique Imran Mohsin, Magnus Karlsson, and Shaofang Gong. Linkoping University, Department of Science and Technology, SE-60174 Norrköping, Sweden E-mail: [email protected] Abstract— A frequency diplexer network for ultra-wideband transmission. One of the additional challenges dealt with in radios focused on wireless parallel data transmission is this paper is the minimization of the frequency diplexer. presented. It has a combination of two band pass filters utilizing manifold multiplexing technique. In the frequency band 6-9 II. OVERVIEW OF THE SYSTEM GHz, two flat sub-bands at center frequencies 6.7 and 8.3 GHz have been achieved with respect to forward transmission, input Figure 1 depicts the architecture of the FDM technique reflection and group delay. A maximum group delay variation of utilizing a receiver and transmitter for wireless parallel data 0.6 ns was measured in the sub-bands.
    [Show full text]