Richelieu-Screws.Pdf

Fastener Guide

HEAD GUIDE

FLAT WITH FLAT BUGLE UNDERCUT CONFIRMAT FILLISTER PAN PAN WASHER TRUSS OVAL TRIM NIBS

Flat top with Drywall style Flat top with nibs Flat top with a Flat top with a Flat top with Semi- Rounded top with Low-profile semi- Slightly rounded Narrow head for a countersunk flat top with a which shallow large shoulder. a deep recess elliptical top a built-in washer elliptical top with top with a coun- less filling. bearing surface. smooth radius allow the head countersunk and flat surface with for larger bearing a flat tersunk bearing bearing surface. to countersink bearing surface. bearing surface. a flat bearing surface. bearing surface. surface. itself. surface.

Phillips Most common drive for Square & QUADREX wood applications Improves stability, PHILLIPS reducing spin-out in power driving PHILLIPS DRIVE GUIDE SQUARE SQUARE SLOT Common PHILLIPS drive for knobs SQUARE Quadrex and pulls

SLOT

square slot SQUARE How to measure screw length:

Pan HEAD FLAT HEAD SLOT

PHILLIPS PHILLIPS POZI SLOT SLOT LENGTH Designed to provide higher torque in SQUARE hand driving LENGTH QUADREX operations PHILLIPS SLOT

POZI POZI THREAD GUIDE

REGULAR WOOD COARSE MACHINE EURO Sheet metal Hi-Lo FINE Used for general Used in particleboard and Used to attach decorative Used for hinge and slide Regularly used for thin Used in hard and soft Used for drywall and woodworking, primar- soft woods. Provides the hardware and in RTA installation, and cabinet metal. Always fully woods. slow entry in hardwood. ily with solid wood and best pull strength. Also applications. assembly. threaded. hardwood. known as deep thread. POINT GUIDE

REGULAR WOOD TYPE 17 TYPE B TYPE TEK TYPE A TYPE AB TYPE S Used for general wood- Sharp grooved point acts Requires pre-drilling. Tip makes pre-drilling A gimlet point used for Combines point of Type Sharp point pierces easily working. as a drill to eliminate pre- A blunt point used in unnecessary. Ideal for piercing into thin sheet A with thread size and into drywall. drilling for quicker, faster heavier metal .050 to fixing wood to steel. metal. pitch of Type B. Normal installation. Prevents .200 thick. limitations of Type B wood from splitting. apply.

www.richelieu.com Page 3 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWALL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware age P 28-31 31 33 43 Cabinet Installation Cabinet Installation Screws Section 4

case (Bulk) Assembly Screws Section 1 ...... Sheet Metal Screws Sheet Metal Section 9 ...... 42 ...... 32 kets and brac -HOLE JIGS box accessories DRIVE BITS. ANCHORS BRACES...... 34-36 AND BISCUITS...... DOWELS 37 FASTENERS...... CORRUGATED 37 CAPS...... COVER 38-41 HOLE PLUGS...... 42 er kits FASTEN POCKET CONNECTORS accessories concrete Drawer Slide Screws Drawer Section 6 section 11 12 13 oint Fasteners J Section 10 age 26 27 2-4 5-10 11 12-13 14 15 16-21 22-23 24-25 P l plastic pai www.richelieu.com Hinge Screws Section 6 Handle and Knob Screws Section 8 ng ackagi

Clear Plastic Jar Screws P Drywall Screws Section 2 metal screws metal joint fasteners screws for hinges, drawer slides and hardware slides drawer screws for hinges, euro screws and knob screws handle installation screws installation adjusters front drawer drywall screws drywall screws frame pocket-hole face fastener guide fastener screws Assembly

*1" bit is included with all jars 9 10 6 7 8 4 5 2 3 section 1 1

Index and Packaging Information Fastener Fastener Guide Page 4 Assembly Screws

Flat Head with Nibs Coarse Thread Type 17 Point assemb l screws

Head Type: Flat head with nibs 1

Drive Type: Quadrex y Thread: Coarse DRYWA LL screws

Point: Type 17 2 no. 8 (recommended bit no.2, SKB23PK) lenGth finish qty/box unit lenGth finish qty/box unit

1" plain 600 FQCN17P81PRJ 1-3/4" plain 400 FQCN17P8134PRJ face frame screws

plain 1000 FQCN17P81prM1 plain 1000 FQCN17P8134prM1 3 plain 11000 FQCN17P81pr plain 4800 FQCN17P8134pr zinc 1000 FQCN17Z81prM1 zinc 1000 FQCN17Z8134prM1

zinc 11000 FQCN17Z81pr zinc 4800 FQCN17Z8134pr i n sta ll ation screws

1-1/4" plain 500 FQCN17P8114PRJ 2" plain 300 FQCN17P82PRJ 4 plain 1000 FQCN17P8114prM1 plain 1000 FQCN17P82prM1 plain 9000 FQCN17P8114pr plain 4000 FQCN17P82pr

zinc 1000 FQCN17Z8114prM1 zinc 1000 FQCN17Z82prM1 drawer fro n t ad j usters zinc 9000 FQCN17Z8114pr zinc 4000 FQCN17Z82pr 5 1-1/2" plain 400 FQCN17P8112PRJ 2-1/4" plain 1000 FQCN17P8214prM1 plain 1000 FQCN17P8112prM1 plain 3500 FQCN17P8214pr

plain 7000 FQCN17P8112pr zinc 1000 FQCN17Z8214prM1 hi n ges screws for hardware zinc 1000 FQCN17Z8112prM1 zinc 3500 FQCN17Z8214pr s l ides & 6 , drawer zinc 7000 FQCN17Z8112pr 2-1/2" plain 250 FQCN17P8212PRJ 1-5/8" plain FQCN17P8158PR plain 1000 FQCN17P8212prM1 zinc FQCN17Z8158PR plain 2500 FQCN17P8212pr euro screws zinc 1000 FQCN17Z8212prM1 zinc 2500 FQCN17Z8212pr 7 3" plain 2000 FQCN17P83pr

zinc 2000 FQCN17Z83pr ha n d l e & k ob screws Flat Head with Nibs Coarse Thread Type 17 Point 8 Head Type: Flat head with nibs meta l screws Drive Type: Phillips Thread: Coarse 9 Point: Type 17 j oi n t faste n ers no. 8 (recommended bit no.2, PB23PK) 10 lenGth finish qty/box unit lenGth finish qty/box unit 1" plain 1000 FPCN17P81prM1 1-3/4" plain 1000 FPCN17P8134prM plain 11000 FPCN17P81pr plain 4800 FPCN17P8134pr

zinc 1000 FPCN17Z8134prM CO NN ECTORS zinc 1000 FPCN17Z81prM1

zinc 4800 FPCN17Z8134pr 11 zinc 11000 FPCN17Z81pr 2" plain 1000 FPCN17P82prM1 1-1/4" plain 1000 FPCN17P8114prM plain 4000 FPCN17P82pr plain 9000 FPCN17P8114pr zinc 1000 FPCN17Z82prM1

zinc 1000 FPCN17Z8114prM accessories zinc 4000 FPCN17Z82pr co n crete zinc 9000 FPCN17Z8114pr 2-1/4" plain 1000 FPCN17P8214prM 12 1-1/2" plain 1000 FPCN17P8112prM plain 3500 FPCN17P8214pr

plain 7000 FPCN17P8112pr zinc 1000 FPCN17Z8214prM

zinc 1000 FPCN17Z8112prM zinc 3500 FPCN17Z8214pr accessories

zinc 7000 FPCN17Z8112pr 2-1/2" plain 1000 FPCN17P8212prM 13 1-5/8" plain FPCN17P8158PR plain 2500 FPCN17P8212pr zinc 1000 FPCN17Z8212prM zinc FPCN17Z8158PR zinc 2500 FPCN17Z8212pr 3" plain 2000 FPCN17P83pr zinc 2000 FPCN17Z83pr

www.richelieu.com Page 5 Assembly Screws

assemb l Flat Head Coarse Thread Type 17 Point assemb l screws screws 1 1 Head Type: Flat head y y VANTAG AD E Drive Type: Quadrex a 1" bit is included with DRYWA LL DRYWA LL

screws Thread: Coarse screws all jars 2 Point: Type 17 2 no. 8 (recommended bit no.2, SKB23PK) +

face frame lenGth finish qty/box unit face frame screws screws

3 1" plain 750 FQC17P81PRJ* 4 3 1-1/4" plain 500 FQC17P8114PRJ* plain 6000 FQC17P8114PR

i n sta ll atio n 2-1/4" plain 250 FQC17P8214PRJ* i n sta ll atio n screws screws

4 2-1/2" plain 2500 FQC17P8212PR 3" plain 150 FQC17P83PRJ* plain 2000 FQC17P83PR drawer fro n t drawer fro n t

ad j usters * J in the part number = JAR ad j usters 5 5 hi n ges hi n ges screws for screws for hardware hardware s l ides & s l ides & 6 7 6 , drawer Flat Head Coarse Thread , drawer

Head Type: Flat head NT DVA AGE

euro screws A euro screws Drive Type: Square a 1" bit is

7 included with Thread: Coarse all jars ha n d l e & k ob ha n d l e & k ob

screws no. 6 (recommended bit no.2, SKB23PK) + screws 8 VANTAG 8 lenGth finish qty/box unit AD E 1 1/4" zinc 1000 FKC2Z6114PRM1 same driver for no.6 or no.8

meta l screws zinc 10500 FKC2Z6114PR meta l screws screw this no. 6 screw fits a no. 2 bit 9 9

no. 6 (recommended bit no.1, SKB13PK)

j oi n t faste n ers lenGth finish qty/box unit j oi n t faste n ers 1 3/4" zinc 550 FKCz6134prj* 10 11 10 * J in the part number = JAR

CO NN ECTORS no. 8 (recommended bit no.2, SKB23PK) CO NN ECTORS

11 lenGth finish qty/box unit lenGth finish qty/box unit 1" zinc 1000 FKCZ81PRM1 2" zinc 1000 FKCZ82PRM1 zinc 8000 FKCZ81PR zinc 3500 FKCZ82PR

accessories 1-1/8" zinc 650 FKCZ8118PRJ* 2-1/4" zinc 1000 FKCZ8214PRM1 accessories co n crete co n crete

12 1-1/4" zinc 500 FKCZ8114PRJ* zinc 3000 FKCZ8214PR 12 zinc 1000 FKCZ8114PRM1 2-1/2" zinc 250 FKCZ8212PRJ*

zinc 6000 FKCZ8114PR zinc 2000 FKCZ8212PR

accessories 1-1/2" zinc 1000 FKCZ8112PRM1 3" zinc 1500 FKCZ83PR accessories

13 zinc 5000 FKCZ8112PR 3-1/2" zinc 125 FKCZ8312PRJ* 13 1-3/4" zinc 500 FKCZ8134PRJ* zinc 1000 FKCZ8134PRM1 zinc 4000 FKCZ8134PR * J in the part number = JAR

Page 6 www.richelieu.com Assembly Screws Assembly Screws

Flat Head Coarse Thread assemb l screws Head Type: Flat head 1 y Drive Type: Phillips DRYWA LL

Thread: Coarse screws 2

no. 8 (recommended bit no.2, PB23PK) lenGth finish qty/box unit lenGth finish qty/box unit face frame

1" plain 1000 FPCP81PRM1 2" plain 1000 FPCP82PRM1 screws plain 11000 FPCP81PR plain 4000 FPCP82PR 3 zinc 1000 FPCZ81PRM1 zinc 1000 FPCZ82PRM1 zinc 11000 FPCZ81PR zinc 4000 FPCZ82PR i n sta ll ation

1-1/8" zinc 1000 FPCZ8118PRM1 2-1/4" plain 1000 FPCP8214PRM1 screws zinc 10000 FPCZ8118PR plain 3500 FPCP8214PR 4 1-1/4" plain 1000 FPCP8114PRM1 zinc 1000 FPCZ8214PRM1

plain 9000 FPCP8114PR zinc 3500 FPCZ8214PR drawer fro n t zinc 1000 FPCZ8114PRM1 2-1/2" plain 1000 FPCP8212M1 ad j usters zinc 9000 FPCZ8114PR plain 2500 FPCP8212PR 5 1-1/2" plain 1000 FPCP8112PRM1 zinc 1000 FPCZ8212PRM1

plain 7000 FPCP8112PR zinc 2500 FPCZ8212PR hi n ges screws for hardware zinc 1000 FPCZ8112PRM1 2-3/4" plain 2500 FPCP8234PR s l ides & 6 zinc 7000 FPCZ8112PR 3" plain 2000 FPCP83PR , drawer 1-3/4" plain 1000 FPCP8134PRM1 zinc 2000 FPCZ83PR plain 4800 FPCP8134PR euro screws zinc 1000 FPCZ8134PRM1 zinc 4800 FPCZ8134PR 7

Flat Head with Nibs Coarse Thread ha n d l e & k ob screws 8

Head Type: Flat head with nibs VANTAG AD E Drive Type: Square a 1" bit is included with meta l screws Thread: Coarse all jars 9

no. 6 (recommended bit no.1, SKB13PK)

lenGth finish qty/box unit lenGth finish qty/box unit + j oi n t faste n ers 1-1/2" zinc 500 FKCNZ6112PRJ* 1-3/4" zinc 400 FKCNZ6134PRJ* 10 zinc 1000 FKCNZ6112PRM1 zinc 1000 FKCNZ6134PRM1 zinc 7000 FKCNZ6112PR zinc 5000 FKCNZ6134PR * J in the part number = JAR CO NN ECTORS

no. 8 (recommended bit no.2, SKB23PK) 11 lenGth finish qty/box unit lenGth finish qty/box unit 1" zinc 1000 FKCNZ81PRM1 2" zinc 400 FKCNZ82PRJ*

zinc 10000 FKCNZ81PR zinc 1000 FKCNZ82PRM1 accessories co n crete

1-1/8" zinc 650 FKCNZ8118PRJ* zinc 3500 FKCNZ82PR 12 1-1/4" zinc 500 FKCNZ8114PRJ* 2-1/2" zinc 225 FKCNZ8212PRJ*

zinc 1000 FKCNZ8114PRM1 zinc 1000 FKCNZ8212PRM1

zinc 7500 FKCNZ8114PR zinc 2500 FKCNZ8212PR accessories

1-1/2" zinc 1000 FKCNZ8112PRM1 3" zinc 1000 FKCNZ83PRM1 13 zinc 5000 FKCNZ8112PR 1-3/4" zinc 1000 FKCNZ8134PRM1 zinc 4000 FKCNZ8134PR * J in the part number = JAR

www.richelieu.com Page 7 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWALL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware + FKWZ101PRJ* FKWZ10112PRJ* FKWZ102PRJ* unit FPWP83PR FPWP8212PR FPWP8214PR FPWP82PR unit unit FKWZ82PRJ* FKWZ8212PRJ* FKWZ83PRJ* FQCZ8212PR FQCZ8212PRM1 FQCZ82PR FQCZ82PRM1 FQCZ8134PR FQCZ8134PRM1 unit ) SKB23PK .2, 900 450 300 qty/box 2500 1000 3500 1000 4000 1000 qty/box 2000 2500 3500 4000 qty/box qty/box 400 250 150 Zinc Zinc Zinc finish finish finish Zinc Zinc Zinc zinc zinc zinc finish number = JAR the part ended bit no 10 (recomm . 1" 1-1/2" 2" * J in no lenGth 3" Plain 2-1/2" Plain 2-1/4" Plain 2" Plain lenGth lenGth 2" 2-1/2" 3" 2-1/2" zinc 2" zinc 1-3/4" zinc lenGth

A V all jars

a 1" bit is

D A with included FKWZ6112PRJ* FKWZ6114PRJ* FKWZ61PRJ* unit FPWP81PR FPWP8114PR FPWP8112PR FPWP8134PR unit unit FQCZ81PRM1 FQCZ81PR FQCZ8114PRM1 FQCZ8114PR FQCZ8112PRM1 FQCZ8112PR unit FKWZ81PRJ* FKWZ8114PRJ* FKWZ8112PRJ* www.richelieu.com .2, PB23PK) .2, ) SKB23PK .2, ) SKB13PK .1, .2, SKB23PK) .2, 11000 9000 7000 4800 qty/box 500 700 900 qty/box 750 600 600 qty/box qty/box 1000 8000 1000 7500 1000 5000 Flat head Phillips Regular Flat head Quadrex Coarse Flat head Square Regular

Zinc Zinc Zinc finish Zinc Zinc Zinc finish finish finish zinc zinc zinc number = JAR the part number = JAR the part

. 8 (recommended bit no . ended bit no 8 (recomm . ended bit no 6 (recomm . . 8 (recommended bit no . * J in 1-1/2" 1-1/4" 1" 1-1/4"1-1/2" Plain 1-3/4" Plain Plain 1" Plain lenGth no 1" 1-1/4" 1-1/2" * J in no lenGth no lenGth no lenGth 1"1-1/4"inc z zinc 1-1/2" zinc Drive Type: Drive Thread: Head Type: Head Head Type: Head Drive Type: Drive Thread: Drive Type: Drive Thread: Head Type: Head Page 8 Flat Head Regular Thread Flat Head Coarse Thread

Flat Head Regular Thread Assembly Assembly Screws

Confirmat assemb l screws 1

Assembly phillips screw y finish Ø length qty/box unit zinc 6 mm 42 mm 2000 1802G DRYWA LL

Ø5 screws

• No countersinking required 2 • Possibility of drilling several boards simultaneously • Easy to use Ø7 face frame screws

30 3

7370502g i n sta ll ation

COARSE, POZi 3 screws finish shank Ø head Ø length qty/box BOX 4 zinc 7 mm 10 mm 50 mm 2000 7370502g drawer fro n t ad j usters 5 HI-LO, Pozi 2 Ø of head finish shank Ø head Ø length qty/box box Ø of shank hi n ges

zinc 5 mm 8 mm 40 mm 100 cp7150402G screws for hardware s l ides & 6

zinc 5 mm 8 mm 40 mm 5000 7150402G , drawer zinc 5 mm 8 mm 50 mm 3000 7150502G zinc 6.3 mm 10 mm 50 mm 2300 7163502g euro screws 7

Hi-Lo, Pozi 3

finish shank Ø head Ø length qty/box box ha n d l e & k ob

zinc 7 mm 10 mm 40 mm 100 CP7170402G screws zinc 7 mm 10 mm 40 mm 2500 7170402G 8 zinc 7 mm 10 mm 50 mm 100 CP7170502G zinc 7 mm 10 mm 50 mm 2000 7170502G meta l screws zinc 7 mm 10 mm 70 mm 1000 7170702G 9

COARSE, Hexagonal 4 j oi n t faste n ers

finish shank Ø head Ø length qty/box box 10 zinc 7 mm 10 mm 50 mm 2000 7175502G Assembly system recommended for boards or furniture that must be assembled or disas- sembled. Requires pre-drilling in both parts to be assembled. CO NN ECTORS 11 accessories Sets of screws and White screw caps co n crete 12 description qty/box set 2

4 assembly screws 717040-2G + 4 screws plugs 7100-30 10 BP71704030 4 assembly screws 717050-2G + 4 screws plugs 7100-30 10 BP71705030 1

7150 : Ø1 (5 mm), Ø2 (4 mm) accessories • Screws and white screw caps

7170, 7175 : Ø1 (7 mm), Ø2 (5,4 mm) 13

www.richelieu.com Page 9 Assembly Screws assemb l assemb l

screws Pozi Hi-Lo Thread screws 1 1

y black y size Ø (A) Length (B) qty/box unit #8 x 33 mm 3 mm 33 mm 7000 0071 DRYWA LL DRYWAdrywa LL ll screws screws

2 #8 x 38 mm 3 mm 38 mm 7000 6074 2 #8 x 45 mm 3 mm 45 mm 5000 0077 HI-LO screws have a double thread that is much sharper than that of traditional screws. This provides extremely rapid insertion and a very strong hold. One diameter face frame ØA face frame screws smaller than standard screws, they take up less space on the material and thereby screws 3 provide heightened resistance to splitting. 4 3

5 i n sta ll atio n i n sta ll atio n B screws screws 4 drawer fro n t drawer fro n t

ad j usters 15.5 mm ad j usters 5 Plastic Cover Cap 5 hi n ges hi n ges screws for screws for hardware hardware s l ides & s l ides & 6 7 6 , drawer , drawer 12 mm 15.5 mm

cover cap for HI-LO Screw caps for confirmat 7170 Screw caps for confirmat 7175 euro screws color qty/1000 color qty/100 qty/1000 qty/5000 color qty/1000 euro screws

7 White 102030 white CP710030 MP710030 710030 White MP780030 Almond 102040 almond CP710040 mP710040 710040 • Plastic 12 mm Brown 102060 brown 710060 ha n d l e & k ob ha n d l e & k ob Light brown 102061 butterscotch 710065 screws screws

8 Black 102090 cherry 710066 8 chestnut 710067 black CP710090 mP710090 710090 meta l screws • Plastic meta l screws 9 9 j oi n t faste n ers j oi n t faste n ers 10 11 10 Accessories CO NN ECTORS CO NN ECTORS 11

Hex keys #4 Drill bits accessories accessories co n crete Description qty/100 qty/2000 Description qty/50 7mm 5.4mm co n crete 12 12 non hardened keys 109412 drill bits 2300HSS

carbonated steel keys CP7730 7730 • For 7170 and 7175 • For 7175 accessories • Black accessories 13 13

Page 10 www.richelieu.com 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware Page 11 + + unit unit DSC83J* DSC83P DSC7212P .2, PB21PK) .2, PB21PK) .2, qty/box 2500 qty/box 150 2000 k phosphate Blac k phosphate Blac finish finish k phosphate Blac ended bit no 7 (recomm . ended bit no 8 (recomm . no lenGth 2-1/2" no lenGth 3"

E E

G G

A A www.richelieu.com

T T

N N

A A

V V all jars all jars

a 1" bit is a 1" bit is

D D

A A with included included with included unit DWTH6158 DWTH6214 DSC6114P DSC6158J* DSC6158P DSC62J* DSC62P DSC6214P DSC61J* DSC61P DSC6118 DSC6114J* unit unit DS6114J* DS6158J* .1, PB13PK) .1, .1, SKB13PK) .1, .2, PB21PK) .2, qty/box 5000 3000 qty/box 500 450 8000 450 5000 350 3500 5000 350 10000 9000 500 qty/box Flat trim head Square Regular S Type Bugle head Phillips Fine S Type Bugle head Phillips Coarse S Type finish k phosphate Blac k phosphate Blac k phosphate Blac k phosphate Blac k phosphate Blac k phosphate Blac k phosphate Blac k phosphate Blac k phosphate Blac k phosphate Blac k phosphate Blac k phosphate Blac finish finish k phosphate Blac k phosphate Blac number = PAIL the part mber = JAR nu the part number = JAR the part . 6 (recommended bit no . . 6 (recommended bit no . ended bit no 6 (recomm . no 1-1/4" lenGth 1-5/8" * J in 1-5/8" no lenGth 2-1/4" ** P in 1-5/8" 2" 2-1/4" * J in 1-1/8" 1-1/4" no lenGth 1" Flat Trim Flat Head Trim Regular S Thread Point Type Drive Type: Drive Thread: Point: Head Type: Head Drive Type: Drive Thread: Point: Head Type: Head Drive Type: Drive Thread: Point: Head Type: Head Bugle Head Fine S Thread Point Type Bugle Bugle Head Coarse S Thread Point Type Drywall Drywall Screws Assembly Assembly Screws 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware unit CKC17KP71C5 CKC17KP71M1 unit pwkc17Kp8114C5 pwkc17Kp8114M1 pwkc17Kp8114 pwkc17Kp8112C5 pwkc17Kp8112M1 .1, SKB13PK) .1, qty/box 500 1000 .2, SKB23PK) .2, qty/box 500 1000 5000 500 1000 finish Plain finish Plain Plain Plain . 7 (recommended bit no . . 8 (recommended bit no . no lenGth 1" Plain Coarse Thread Coarse no lenGth 1-1/4" Plain 1-1/2" Plain

G G

A A

T T DRIVER

N DRIVER

A A screw

screw

V V

no.7 or no.8 no.8 or no.7

SAME D SAME

A A FOR FOR unit cqshlp7114PRm1 cqshlp7114PR cqshlp7112PRm1 cqshlp7112PR PWK17P7114PRM1 PWK17P7114PR unit unit CKW17KP61C5 CKW17KP61M1 www.richelieu.com www.richelieu.com .1, SKB13PK) .1, ) SKB23PK .2, .2, SKB23PK) .2, qty/box 500 1000 qty/box 1000 6000 1000 5000 1000 6000 qty/box .2 bit .2 bit Fillister Square or Coarse Fine 17 Type Fillister Quadrex Hi-Lo 17 Type Pan washer Pan Square or Coarse Fine 17 Type

finish Plain Plain Plain finish plain plain finish

. 6 (recommended bit no . ended bit no 7 (recomm . . 7 (recommended bit no . Fine Thread Fine 1" Plain no lenGth no lenGth 1-1/4" Plain 1-1/2" Plain o A N THIS SCREW FITS THIS SCREW FITS A No THIS SCREW FITS 1-1/4" no lenGth Fillister Fillister Head Hi-Lo 17 Thread Point Type Head Type: Head Drive Type: Drive Thread: Point: Head Type: Head Type: Drive Thread: Point:

Fillister Head Fine or Coarse 17 Thread Point Type Face Face Frame Pocket-Hole Screws Page Page 1212 Drive Type: Drive Thread: Point: Head Type: Head Pan Washer Pan Head Washer Fine or Coarse 17 Thread Point Type

www.richelieu.com

A V all jars

a 1" bit is

D A with included unit PQ17P81PRJ* PQ17P81PR PQ17P8114PRJ* PQ17P8114PR unit PKW17BZ6114PRM1 PKW17BZ6114PR PKW17BZ6112PRM1 PKW17BZ6112PR unit PPW17BZ6114PRM1 PPW17BZ6114PR PPW17BZ6112PRM1 PPW17BZ6112PR ) SKB23PK .2, .2, PB23PK) .2, .1, PB13PK) .1, qty/box 750 8000 700 6000 qty/box 1000 10000 1000 8500 qty/box 1000 10000 1000 8500 Pan head Pan Quadrex Regular 17 Type xide xide xide xide xide xide xide xide Pan head Pan Square Regular or Coarse 17 Type Pan head Pan Phillips Regular or Coarse 17 Type finish Plain Plain k o Blac k o Blac finish k o Blac k o Blac finish number = JAR the part ended bit no 8 (recomm . . 6 (recommended bit no . . 6 (recommended bit no . lenGth no 1" Plain 1-1/4" Plain * J in Regular Thread Regular 1-1/4"k o Blac 1-1/2"k o Blac lenGth no 1-1/4"k o Blac 1-1/2"k o Blac no lenGth Pan Head Regular 17 Thread Point Type Regular Thread Regular Drive Type: Drive Thread: Point: Head Type: Head Face Face Frame Pocket-Hole Screws Head Type: Head Drive Type: Drive Thread: Point: Head Type: Head Type: Drive Thread: Point: Pan Head Regular or Coarse 17 Thread Point Type Pan Head Regular or Coarse 17 Thread Point Type Face Face Frame Pocket-Hole Screws + + TQCZ103PR TQCW103PRM1 TQCS103PRM1 unit PWQCZ83PR PWQCZ83PRM1 PWQCZ8212PR PWQCZ8212PRM1 PWQCZ82PR PWQCZ82PRM1 PWQCZ8134PRM1 PWQCZ8134PR PWQCZ8134PRJ* unit PWKCZ8212PR pwkcz83pr PWKCZ82PR PWKCZ8212PRJ* unit PWKCZ82PRJ* 1500 1000 2000 1000 3000 1000 1000 4000 350 qty/box 1500 2000 350 3000 300 qty/box 1500 1000 1000 qty/box zinc zinc zinc zinc zinc finish zinc zinc finish Zinc White finish 3" Sand lenGth 3" zinc 2-1/2" zinc 2" zinc 1-3/4" zinc lenGth 3" zinc 2-1/2" zinc 2" zinc lenGth

E E

G G

A A

T T

N N

A A

V V all jars all jars

a 1" bit is a 1" bit is

D D

A A with included included with included unit PWQCZ81PRM1 PWQCZ81PR PWQCZ8118PRM1 PWQCZ8118PR PWQCZ8114PRM1 PWQCZ8114PR PWQCZ8112PRM1 PWQCZ8112PR unit TPWSS8212 TPWSW8212 unit TQCS10212PR TQCW10212PR TQCZ10212PR PWKCZ8118PR PWKCZ8118PRJ* PWKCZ81PR PWKCZ81PRJ* unit www.richelieu.com .2, SKB23PK) .2, .2, PB23PK) .2, .2, SKB23PK) .2, ) SKB23PK .2, 6000 600 8000 700 qty/box qty/box 2000 2000 qty/box 1500 1500 2000 qty/box 1000 8000 1000 6000 1000 6000 1000 5000 Truss head Truss Phillips Regular Truss head Truss Quadrex Thread Coarse Half Pan washer head washer Pan Square Coarse Pan washer head washer Pan Quadrex Coarse

White Zinc finish zinc zinc finish zinc zinc zinc zinc finish White finish number = JAR the part number = JAR the part

. 10 (recommended bit no . . 8 (recommended bit no . . 8 (recommended bit no . ended bit no 8 (recomm . 2-1/2" Sand no lenGth * J in 1-1/8" zinc 1" zinc 2-1/2" Sand no lenGth no lenGth 1"1-1/8" zinc zinc 1-1/4" zinc 1-1/2" zinc * J in lenGth no Head Type: Head Type: Drive Thread: Head Type: Head Drive Type: Drive Thread: Head Type: Head Type: Drive Thread: Drive Type: Drive Thread: Head Type: Head Page 14 Truss Head Truss Regular Thread Truss Head Truss Coarse Half Thread Pan Washer Pan Head Washer Coarse Thread

Pan Washer Pan Head Washer Coarse Thread Installation Installation Screws

QTY/BOX 1000 QTY/BOX QTY/BOX 20 1 lenGth 1-1/4" 1-1/2" lenGth 1-1/4" www.richelieu.com unit PMQC17Z81PRM1 PMQC17Z81PR PMQC17Z8118PRM1 PMQC17Z8118PR unit PWMPCZ81PRM1 PWMPCZ81PR PWMPCZ8118PRM1 PWMPCZ8118PR TCMZM420VP (see page 25) UNIT UNIT 63072G 3019302G ) SKB23PK .2, SKB23PK) .2, qty/box 1000 7000 1000 6500 qty/box 1000 7000 1000 6500 odified pan washer head washer pan Modified Quadrex Coarse 17 Type washer head Modified pan Phillips Coarse TCMZM415VP and

finish Zinc Zinc finish Zinc Zinc Zinc Zinc Zinc Zinc . 8 (recommended bit no . ended bit no 8 (recomm . for adjustment no lenGth lenGth no 1" 1-1/8" 1" 1-1/8" • DIMENSION • style front" drawer front adjuster is ideal for dovetail drawers on a "shaker This • install it you need to groove your drawer box front and bore a 10mm hole To • M4 steel nut Nylon housing with pre-mounted • 4-sided drawers For • by 5 (3/16") Adjusts height and side-to-side UNIT DIMENSION 29510012 1 3/4" x 2 1/4" 1 3/16" • Machine screws and M4 screws are not included • Suggested screws: Drawer Drawer Front Adjusters Head Type: Head Drive Type: Drive Thread: Point: Type: Drive Thread: Head Type: Head Drawer Front Adjuster Drawer Front Adjuster Drawer Front Adjuster Modified Pan Head Washer Coarse Thread Modified Modified Pan Head Washer Coarse 17 Thread Point Type Installation Installation Screws 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware + +

D E

M slides

tandem tandem M

these no.7 these no.7 O

screws can be C

used with blum used

unit FQC2Z758 R unit FKCZ834PRJ* .2, SKB23PK) .2, qty/box 15000 .2, SKB23PK) .2, qty/box 550

T finish

N A finish

screw

D same driver number = JAR the part A . 7 (recommended bit no . for no.6 or no.8 or for no.8 no.6 . 8 (recommended bit no . no lenGth 5/8" zinc no lenGth 3/4"* J in zinc

G E A

G T

T A

N V all jars

a 1" bit is

V all jars A with included

a 1" bit is

D A with included unit FQCZ758PRJ* FQCZ758M1 FQCZ758 FQCZ658PRJ* FQCZ658PRM1 FQCZ658PR FQCN658PRM1 FQCN658PR unit unit FKC2Z658USPRM1 FKC2Z658USPR FQc17P658PRM1 FQc17P658PR unit unit FKCZ658PRJ* FKCZ658PRM1 FKCZ658PR www.richelieu.com .1, SKB13PK) .1, .1, SKB13PK) .1, .2, SKB23PK) .2, .1, SKB13PK) .1, ) SKB13PK .1, 800 1000 15000 1000 15000 qty/box qty/box 700 1000 15000 . 5 heads . qty/box 1000 30000 1000 15000 qty/box qty/box 800 1000 15000 . 2 bit . a no Flat head Quadrex Coarse Flat head Square Coarse Flat head Quadrex Coarse 17 Type finish zinc zinc zinc zinc nickel nickel finish

zinc zinc finish zinc finish plain plain finish no 6 screws have . . 6 screw fits . mber = JAR nu the part mber = JAR nu the part number = JAR the part

. 7 (recommended bit no . . 6 (recommended bit no . . 6 (recommended bit no . . 6 (recommended bit no . ended bit no 6 (recomm . * J in no lenGth 5/8" zinc 5/8" zinc * J in no lenGth 5/8" zinc this no no lenGth no 5/8" zinc these no * J in lenGth no 5/8" lenGth Head Type: Head Drive Type: Drive Thread: Page 16 Flat Head Coarse Thread Drive Type: Drive Thread: Head Type: Head Drive Type: Drive Thread: Point: Head Type: Head Flat Head Coarse Thread

Flat Head Coarse 17 Thread Point Type Screws Screws for Hinges, Drawer Slides & Hardware

1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWALL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware Page 17 unit FPCN758PRM1 FPCN734PRM1 unit FPCAB612PRM1 FPCB612PRM1 FPCN612PRM1 FPCAB658PRM1 FPCB658PRM1 FPCN658PRM1 FPCN658PR FPCN634PRM1 FPCN634PR FPCN61PRM1 FPCZ634PR FPCZ61PRM1 FPCZ658PR FPCZ634PRM1 unit FPCZ612PRM1 FPCZ658PRM1 .1, PB13PK) .1, PB13PK) .1, qty/box 1000 1000 1000 1000 1000 1000 5000 1000 5000 1000 .1, PB13PK) .1, 24000 1000 30000 1000 qty/box 1000 1000 qty/box 1000 1000 antique brass Bright brass nickel antique brass Bright brass nickel nickel nickel nickel nickel finish finish nickel nickel zinc zinc finish . 6 (recommended bit no . 7 (recommended bit no . ended bit no 6 (recomm . 1/2" 5/8" 3/4" 1" no lenGth no lenGth 5/8" 3/4" 1" zinc 3/4" zinc no lenGth 1/2"5/8" zinc zinc www.richelieu.com unit FPCB412PRM1 FPCB458PRM1 unit FPCAB512PRM1 FPCB512PRM1 FPCN512PRM1 FPCAB558PRM1 FPCB558PRM1 FPCN558PRM1 unit FPCZ512PRM1 FPCZ558PRM1 unit FPCZ412PRM1 FPCZ458PRM1 .0, PB03PK) .0, PB13PK) .1, .1, PB13PK) .1, .0, PB03PK) .0, qty/box 1000 1000 qty/box 1000 1000 1000 1000 1000 1000 qty/box 1000 1000 qty/box 1000 1000 Flat head Phillips Coarse Flat head Phillips Coarse Bright brass nickel Bright brass nickel finish finish antique brass antique brass finish finish . 5 (recommended bit no . . 4 (recommended bit no . ended bit no 5 (recomm . ended bit no 4 (recomm . 1/2"5/8" Bright brass Bright brass no 1/2" 5/8" no lenGth lenGth no lenGth no 1/2"5/8" zinc zinc lenGth 1/2" zinc 5/8" zinc Screws Screws for Hinges, Drawer Slides & Hardware Flat Head Coarse Thread Zinc Finish Head Type: Head Type: Drive Thread: Flat Head Coarse Thread Drive Type: Drive Thread: Head Type: Head Screws Screws for Hinges, Drawer Slides & Hardware 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware + + unit PQCP1058PRJ* .2, SKB23PK) .2, qty/box 800 finish . 10 (recommended bit no . no lenGth 5/8" Plain

E E

G G

A A

T T

N N

A A

V V all jars all jars

a 1" bit is a 1" bit is

D D

A A with included included with with included unit PPC17N1034PRM1 PPC17N1034PR PQCP8916PRJ* PQCZ8916PR PQCP858PRJ* PQCZ858PRM1 PQCZ858PR PQCP834PRJ* unit PQAZ658PRM1 PQAZ612PRM1 unit unit PQ17P834PRJ* PQ17P834PR www.richelieu.com .2, PB23PK) .2, .2, SKB23PK) .2, ) SKB13PK .1, .2, SKB23PK) .2, 600 12000 1000 1000 12000 800 qty/box 1000 1000 qty/box 1000 9000 qty/box qty/box 800 10000 Pan head Pan Quadrex Regular A Type Pan head Pan Quadrex Coarse 17 Type Pan head Pan Quadrex Coarse Pan head Pan Phillips Coarse 17 Type

zinc zinc zinc finish finish nickel finish nickel finish Plain mber = JAR nu the part number = JAR the part

. 8 (recommended bit no . . 10 (recommended bit no . ended bit no 6 (recomm . . 8 (recommended bit no . 5/8" zinc 1/2" zinc 5/8" Plain 3/4"* J in Plain 9/16" Plain lenGth 3/4" no lenGth no no lenGth no lenGth 3/4" Plain * J in Drive Type: Drive Thread: Point: Head Type: Head Page 18 Pan Head Coarse Thread Pan Head Coarse 17 Thread Point Type Pan Head Coarse 17 Thread Point Type Pan Head Regular A Thread Point Type Drive Type: Drive Thread: Point: Head Type: Head Drive Type: Drive Thread: Head Type: Head Drive Type: Drive Thread: Point: Head Type: Head Screws Screws for Hinges, Drawer Slides & Hardware

E G

G A

A T www.richelieu.com

A V all jars

a 1" bit is

V all jars D

a 1" bit is

D A with included A with included unit PPCN1058PRM1 PPCN1034PRM1 PPCN1034PR PWQCZ834PR PWQCZ858PR PWQCZ834PRM1 unit PWQCZ858PRM1 PKCW8916PR PKCW8916PRJ* unit PKCZ612PRM1 PKCZ612PR PKCZ658PRM1 PKCZ658PR unit .2, PB23PK) .2, .2, SKB23PK) .2, .2, SKB23PK) .2, ) SKB13PK .1, qty/box 1000 1000 9000 8000 12000 1000 qty/box 1000 12000 600 qty/box 1000 15000 1000 15000 qty/box Pan washer head washer Pan Quadrex Coarse Pan head Pan Square Coarse Pan head Pan Phillips Coarse Pan head Pan Square Coarse zinc zinc finish finish Nickel white white finish zinc zinc finish mber = JAR nu the part . 8 (recommended bit no . . 8 (recommended bit no . . 10 (recommended bit no . ended bit no 6 (recomm . * J in 3/4" zinc 9/16" 5/8" zinc lenGth no no lenGth no lenGth 5/8" Nickel 3/4" Nickel 5/8" zinc no 1/2" zinc lenGth Screws Screws for Hinges, Drawer Slides & Hardware Head Type: Head Type: Drive Thread: Head Type: Head Type: Drive Thread: Head Type: Head Type: Drive Thread: Drive Type: Drive Thread: Head Type: Head Pan Head Coarse Thread Pan Head Coarse Thread Pan Head Coarse Thread Pan Washer Pan Head Washer Coarse Thread Screws Screws for Hinges, Drawer Slides & Hardware 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware +

A V all jars

a 1" bit is

D A with included unit J* TKAW1034PR TKAW1034 unit TMPC17N834PRM1 unit TPCZ612PRM1 unit TMPABB8716PRM1 TMPABZ8716PRM1 TMPABZ8716PR TMPABZ812PRM1 www.richelieu.com ) SKB23PK .2, .2, PB23PK) .2, .2, PB23PK) .2, .1, PB13PK) .1, qty/box 500 8000 qty/box 1000 qty/box 1000 qty/box 1000 1000 14000 1000 Modified truss head Phillips Regular AB Type Modified truss head Phillips Coarse 17 Type Truss head Truss Phillips Coarse Truss head Truss Square Regular A Type white finish white

finish finish nickel finish zinc zinc number = JAR the part

. 8 (recommended bit no . . 8 (recommended bit no . . 6 (recommended bit no . ended bit no 10 (recomm . lenGth no 7/16"k zinc Blac 1/2" zinc 3/4" no lenGth lenGth 3/4" * J in no 1/2" zinc lenGth no Head Type: Head Type: Drive Thread: Point: Head Type: Head Type: Drive Thread: Point: Drive Type: Drive Thread: Head Type: Head Drive Type: Drive Thread: Point: Head Type: Head Page 20 Modified Truss Modified Head Truss Regular AB Thread Point Type Truss Head Truss Regular A Thread Point Type Modified Truss Modified Head Truss Coarse 17 Thread Point Type

Truss Head Truss Coarse Thread Screws Screws for Hinges, Drawer Slides & Hardware

1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWALL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware Page 21 l caps meta SCREWS www.richelieu.com qty/500 qty/500 TQAZ612M1 TQAZ612 unit FPUCZ658PR unit OPAB558PRM1 OPAAB558PRM1 unit cp62180 62180 cp62130 62130 qty/100 qty/100 .1, PB13PK) .1, .1, PB13PK) .1, .1, 4194) .1, 1000 15000 qty/box 30000 qty/box 1000 1000 qty/box bp62180 bp62130 qty/8 Truss Quadrex Regular Oval head Oval Phillips Regular A Type Flat head, undercut Flat head, Phillips Coarse qty/8 Bp1621220 Cp1621220 1621220 Bp1621225 Cp1621225 1621225 Bp1621230 Cp1621230 1621230 Bp1621235 Cp1621235 1621235 Bp1621240 Cp1621240 1621240 15 mm 15 mm Ø zinc finish Zinc finish antique brass finish . 6 (recommended bit no . ended bit no 5 (recomm . . 6 (recommended bit no . • Metal cover caps only nickel 5/8" Bright brass brass 5/8" 5/8" screws caps for decorative l cover Meta finish zinc length no lenGth no lenGth 20 mm 25 mm 30 mm 35 mm 40 mm • Screws only • Flat Head • Flat Drive 1/2” zinc lenGth no Drive Type: Drive Thread: Head Type: Head Decorative Screw with Cap Truss Head Truss Regular Thread Screws Screws for Hinges, Drawer Slides & Hardware Drive Type: Drive Thread: Point: Head Type: Head Head Type: Head Type: Drive Thread: Undercut Head Coarse Thread Oval Head Regular Thread Screws Screws for Hinges, Drawer Slides & Hardware 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware B 7 mm 6.3 mm A 9 mm unit unit 6620752g 6681302g 6621302g unit MP660100180 6601002g MP660115180 6601152g MP660130180 6601302g 6612502g unit 6611002g 6611152g 6611302g 66114502g qty/box qty/box 500 10000 500 qty/box 1000 1000 1000 1000 1000 1000 qty/box 1000 1000 1000 1000 finish finish nickel nickel finish nickel Zinc Zinc nickel Zinc Zinc finish Zinc Zinc Zinc Zinc www.richelieu.com Pan head Pan Pozi Euro Flat head Phillips Euro Flat head Pozi Euro Ø OD Ø drill Ø OD Ø drill Ø OD Ø drill Ø OD Ø drill

8 mm head lenGth A 9 mm 7 mm B lenGth 7,5 mm 6 mm 5 mm 13 mm 6,3 mm 5 mm zinc 7,5 mm 6 mm 5 mm 7 mm head lenGth 10 mm 6,3 mm 5 mm 10 mm 6,3 mm 5 mm 11.5 mm 6,3 mm 5 mm NICKEL 1000 11.5 mm 6,3 mm 5 mm 13 mm 6,3 mm 5 mm 13 mm 6,3 mm 5 mm 25 mm 6,3 mm 5 mm 8 mm head lenGth 10 mm 6,3 mm 5 mm 11.5 mm 6,3 mm 5 mm 13 mm 6,3 mm 5 mm 14.5 mm 6,3 mm 5 mm Page 22 Drive Type: Drive Thread: Head Type: Head Drive Type: Drive Thread: Head Type: Head Drive Type: Drive Thread: Head Type: Head Flat Head Euro Screw Pan Head Euro Screw

Flat Head Euro Screw Euro Euro Screws

1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWALL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware Page 23 unit mp1400 1400 FQESZM610 unit fqesZM613 unit fq2esZM613 qty/box 12000 qty/box 12000 www.richelieu.com qty/box unit unit 1000 80213212 60812002g 12000 finish finish finish qty/box qty/box 10000 10000 ZINC 10000 .1, PB13PK .1, PB23PK .2, .1, PB13PK .1, finish finish nickel Flat head (for plastic dowel) Pozi Euro (for plastic dowel) Flat head Quadrex Euro recommended bit no Ø OD Ø drill recommended bit no Ø OD Ø drill recommended bit no Ø OD Ø drill Ø OD Ø drill lenGth lenGth 13 mm 6.5 mmlenGth 5.5 mm13 mm zinc 6.5 mm 5 mm zinc dowel lenGth lenGth 7 mm head 7.75 mm head 7.75 mm head 8 mm head 10 mm 6 mm 5 mm zinc 12 mm 6,3 mm 10 mm 8 mm Natural 10 mm 6 mm 5 mm zinc 10 mm 6 mm 5 mm Euro Euro Screws Drive Type: Drive Thread: Head Type: Head Drive Type: Drive Thread: Head Type: Head Plastic Dowel Flat Head Euro Screw (for plastic dowel) Flat Head Euro Screw Euro Euro Screws 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware + TCPMZ8322M1 TCPMZ8322VP TCPMZ832134M1 TCPMZ832134VP TCPMZ832112M1 TCPMZ832112VP TCPMZ832138M1 TCPMZ832138VP TCPMZ832114M1 TCPMZ832114VP TCPMZ832118M1 TCPMZ832118VP TCMZ8321VP TCMZ8321J* TCMZ8321M1 TCMZ832118VP TCMZ832118J* TCMZ832118M1 TCMZ832114VP TCMZ832114J* TCMZ832114M1 TCMZ8321516VP TCMZ8321516M1 TCMZ832138VP TCMZ832138M1 TCMZ832112VP TCMZ832112M1 TCMZ832134VP TCMZ832134M1 TCMZ8322VP TCMZ8322M1 L L L L L L L L L L L L unit unit L L L L L L L L L L L L L L L L L L L 1000 100 1000 100 1000 100 1000 100 1000 100 1000 100 qty/box 100 100 100 100 100 100 100 100 qty/box 500 1000 450 1000 500 1000 1000 1000 1000 1000 1000 zinc zinc zinc zinc zinc zinc finish zinc zinc zinc zinc zinc zinc zinc zinc zinc zinc zinc finish 1" zinc 1-1/8" zinc 1-1/4" zinc 1-5/16" zinc 1-3/8" zinc 1-1/2" zinc 1-3/4" zinc 2" zinc lenGth 2" zinc 1-3/4" zinc 1-1/2" zinc 1-3/8" zinc 1-1/4" zinc 1-1/8" zinc lenGth

A V all jars

a 1" bit is

D A with included TCMZ83214VP TCMZ83214M1 TCMZ832516M1 TCMZ83238VP TCMZ83238J* TCMZ83238M1 TCMZ83212VP TCMZ83212J* TCMZ83212M1 TCMZ83258VP TCMZ83258M1 TCMZ83234VP TCMZ83234J* TCMZ83234M1 TCMZ83278VP TCMZ83278J* TCMZ83278M1 TCPMZ83238VP TCPMZ83238M1 TCPMZ83212VP TCPMZ83212M1 TCPMZ83258VP TCPMZ83258M1 TCPMZ83234VP TCPMZ83234M1 TCPMZ83278VP TCPMZ83278M1 TCPMZ8321VP TCPMZ8321M1 unit L L L L L L L L L L L L L L L L L unit L L L L L L L L L L L L www.richelieu.com qty/box 100 1000 1000 100 800 1000 100 750 1000 100 1000 100 600 1000 100 500 1000 qty/box 100 1000 100 1000 100 1000 100 1000 100 1000 100 1000 Large truss head Large truss Phillips slot Machine 8-32 B Type Large truss head Quadrex slot Machine 8-32 B Type . SK23PK) . . Pb23PK) .

finish zinc zinc zinc zinc zinc zinc zinc zinc zinc zinc finish zinc zinc zinc zinc zinc zinc mber = JAR nu the part

. 8 (use bit no . no 8 (use bit . no lenGth 1/4" zinc 5/16" zinc 3/8" zinc 1/2" zinc 5/8" zinc 3/4" zinc 7/8" zinc * J in 3/8" zinc no lenGth 1/2" zinc 5/8" zinc 3/4" zinc 7/8" zinc 1" zinc Page 24 Head Type: Head Drive Type: Drive Thread: Point: Drive Type: Drive Thread: Point: Head Type: Head Large Truss Large Head Truss 8-32 Machine B Thread Point Type

Large Truss Large Head Truss 8-32 Machine B Thread Point Type Handle Handle and Knob Screws

AY AY W W A A - -

K K finish

A A

E E

R R

B B

30 mm35 mm zinc 40 mm zinc 50 mm zinc zinc lenGth

E E

G G

A A

T T www.richelieu.com

N N

A A

V V all jars all jars

a 1" bit is a 1" bit is

D D

A A with included included with with included J* TCBAZ8322 TCMZM425VP TCMZM422VP TCMZM420VP TCMZM415VP unit unit 2900 L unit 2800 PPMZM42J* .2, PB23PK) .2, .2, Pb23PK) .2, .2, SK23PK) .2, 100 100 qty/box 100 200 100 100 qty/box qty/box 100 300 qty/5000 583511 total length 4 mm Large truss head Square slot Machine 8-32 B Type Pan head Pan slot Pozi Machine M4 B Type Large truss head Large truss slot Quadrex Machine M4 B Type 6 mm, zinc finish finish zinc finish mber = JAR nu the part number = JAR the part . 8 (recommended bit no . mmended bit no M4 (reco . . M4 (recommended bit no . 25 mm zinc 22 mm zinc 2"* J in zinc no lenGth 20 mm zinc 15 mm zinc no lenGth no 2"* J in zinc lenGth clear plastic qty/100 CP583511 • door hole and its handle screw Installs between the glass • Drill bit required: Handle Handle and Knob Screws Head Type: Head Type: Drive Thread: Point: Head Type: Head Type: Drive Thread: Point: Drive Type: Drive Thread: Point: Head Type: Head Plastic Insert Large Truss Large Head Truss 8-32 Machine B Thread Point Type Break-Away Pan Head M4 Machine B Thread Point Type Break-Away Large Truss Large Head Truss M4 Machine B Thread Point Type Handle Handle and Knob Screws 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware + + FQTZ102PRJ* FQTZ10112PRJ* FQTZ101PRJ* FQTZ1034PRJ* unit unit PKAZ1012PRJ* PKAZ1034PRJ* PKAZ101PRJ* PKAZ10112PRJ* ) SKB23PK .2, .2, SKB23PK) .2, 300 450 900 750 qty/box qty/box 1000 750 500 400 finish finish number = JAR the part mber = JAR nu the part ended bit no 10 (recomm . . 10 (recommended bit no . no lenGth 1/2"3/4" zinc 1" zinc 1-1/2"* J in zinc zinc * J in 2" zinc 1-1/2" zinc 1" zinc 3/4" zinc no lenGth

E E

G G

A A

T T

N N

A A

V V all jars all jars

a 1" bit is a 1" bit is

D D

A A with included included with included unit PKAZ638PRJ* PKAZ658PRJ* unit TPTW10212PR unit PKAZ812PRJ* PKAZ858PRJ* PKAZ834PRJ* PKAZ81PRJ* PKAZ8112PRJ* unit FQTZ612PRJ* unit FQTZ812PRJ* FQTZ81PRJ* FQTZ8114PRJ* FQTZ8112PRJ* www.richelieu.com .2, PB23PK) .2, ) SKB23PK .2, ) SKB13PK .1, .1, SKb13PK) .1, SKB23PK) .2, qty/box 900 800 qty/box 800 750 700 600 qty/box 1500 qty/box 1000 1000 1000 700 500 qty/box 1000 Truss head Truss Phillips Regular Tek Type Pan head Pan Square Regular A Type Flat head Quadrex Regular Tek Type

white finish finish finish finish finish number = JAR the part number = JAR the part mber = JAR nu the part mber = JAR nu the part

. 10 (recommended bit no . ended bit no 8 (recomm . ended bit no 6 (recomm . . 6 (recommended bit no . 8 (recommended bit no . 2-1/2" lenGth no 1/2"5/8" zinc 3/4" zinc 1" zinc 1-1/2"* J in inc z zinc no lenGth no lenGth 3/8" zinc 5/8"* J in zinc lenGth lenGth no 1/2"* J in zinc no 1/2" zinc 1"1-1/4"1-1/2" zinc zinc * J in zinc Page 26 Truss Head Truss Point Regular Tek Thread Type Flat Head Point Regular Tek Thread Type Drive Type: Drive Thread: Point: Head Type: Head Head Type: Head Type: Drive Thread: Point: Head Type: Head Drive Type: Drive Thread: Point:

Pan Head Regular A Thread Point Type Metal Metal Screws

Page 27 1-1/4" Ø 35 5/8" 1-3/8" 32 - 41 Ø 7/8" Ø1/4" 15 Ø1/4"

4" Ø5mm 1-3/4" 7/16" à 2-5/8" qty/2000 qty/100 CP40080090 40080090 length of 30 to 39 mm t qty/2 BP40080030 CP40080030 40080030 l bo M6 connector color white k blac • panel connection, For www.richelieu.com AR TJFZA14312J (50) TJFZA14314J (60) TJFZA143J (65) J TJFZA14212J (75) qty/100 qty/500 10622G 40002g qty/350 977281 unit 917280 917282 qty/20 1501260 temporary or qty/pair BP5162G 5162g 2" to 3502g 3252g 3002g qty/500 2502g 3-1/2" to qty/2000 314290 2" size 3/4" x 2-1/2" bp3502g qty/4 Ø drill35 mm length 3/4" thread 3/4" Ø drill length NER T" FASTE 4" 3-1/2" 3-1/4" 3" length 2-1/2" template astener #182 adjoining surfaces material and for warpage permanent zinc zinc zinc zinc zinc "FLIPBOL DESCRIPTION FLIPBOLT k) J-HOOK (two per pac flipbolt Joint F model 182 • not only clamps edges flush but also levels joint Fastener The • set screws compensate for different thicknesses of The • clamping, Ideal for all types of sectional • 10 gauge wrought steel • 20 per Packed ner Joint faste finish ner Joint faste finish zinc ner Joint faste finish zinc • threaded ball is used to bring two pieces together The 1/4" - 20 Thumb screw finish kblac 1/4" - 20 • plastic handle Black • - 20 nut be used with a 1/4’’ To • temporary assembly For The Flipbolt is fast and easy, requires no easy, Flipbolt is fast and The tools and is great for most countertop connections. Joint Joint Fasteners Specialized Specialized Fastener Metal Metal Screws 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware 2 2 L L L 2 L L 1 1 L L 9 L L L 1 L 10 9 with “JRN” nut “JRN” with 2 1 L 17 6 1 L 17 6 2.2 B 17 2.2 5 B 17 2.2 4 with “D” nut “D” with 4 with “JCB-B” bolt “JCB-B” with Hex key #5 Hex key 109512 qty/box qty/box l1 l2 l1 l2 qty/2400 JCBA0101C2 qty/box L 30 mm 10 mm35 mm 20 mm 10 mm 2000 40 mm 20 mm 10 mm 1800 50 mm 25 mm 10 mm 1600 60 mm 30 mm 10 mm 1400 30 mm 40 mm 10 mm 1200 70 mm 50 mm 10 mm 800 60 mm 1200 L 50 mm 10 mm 40 mm 1400 qty/box L2 l2 L1 qty/box www.richelieu.com L1 10 mm 20 mm l1 L 12 mm17 mm 8 mm 13 mm 3000 2400 L1 4 hex key 4 hex key 5 hex key 5 hex key no. 13 mm16 mm 8 mm 10 mm 4000 4000 L no. no. no. 50 mm 20 mm 30 mm 1400 40 mm 10 mm 30 mm 1600 30 mm 10 mm 20 mm 3000 nickel JCN0101C2 JCN0102C2 nickel JCBB0101C2 JCBB0102C2 JCBB0103C2 JCBB0105C2 JCBB0107C2 JCBB0109C2 L 30 mm

• Sold by box or by unit Finish bronze • Sold by box or by unit Finish bronze JCBB0101C1 JCBB0102C1 JCBB0103C1 JCBB0105C1 JCBB0107C1 JCBB0109C1 JCBB0113C1 • M6 x P1.0, Thread JCBB0105M1 • 1/4 x 20, Thread • 1/4 x 20, Thread • Sold by box or by unit finish nickel JCBBW01032 JCBBW01022 JCBBW01012 • Sold by box or by unit FINISH bronze JCN0101C1 JCN0102C1 • 1/4 x 20, Thread JRN0100C2G JRN0101C2G • 1/4 x 20 Thread FINISH zinc FINiSH nickel l Page 28 JRN Nut JRN Nut JCB-B Bolt JCB-A Bolt

JCB-BW JCB-BW Bolt • 4 no. Hex key Fits • requires pre-drilling of 6 mm No insert required and Connectors

1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWALL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware Page 29 1 2 Ø Ø 3 Ø 1 L L L Nut: “B” type “B” Nut: leveller Nut: type “D” type Nut: JCB-A Bolt: Nut: JRN Nut: JCB-A Bolt: Nut: “E” type “E” Nut: regular screw 3 Ø 1 2 Ø Ø B Application examples with bolts and nuts qty/box 4000 qty/box qty/box qty/box 1800 1300 qty/box 5000 5000 6000 3500 2000 2000 2000 1250 1000 qty/box 0B0207C2G 109412 109512 109690 box www.richelieu.com 0D0503C2G 0D0507C2G 0D0107M2G 0D0107C2G 0D0108M2G 0D0208C2G 0D0209C2G drilling Ø BOX cp7730 7730 qty/100 drilling Ø BOX drilling Ø BOX drilling Ø BOX drilling Ø BOX 4 mm 5 mm 6 mm 4 mm dimension 8 hex key 10 hex key 6 hex key steel zinc or non hardened no. no. no. 6 hex key no. Ø1 Ø2 Ø3 Ø1 Ø2 Ø3 Ø1 Ø2 Ø3 Ø1 Ø2 Ø3 l1 Ø1 Ø2 Ø3 non hardened steel zinc k blac zinc 25 mm 14.5 mm 13.5 mm 9.5 mm• 3/8 x 16, Thread 11.2-11.5 mm L 25 mm 16 mm 15.5 mm 11.5 mm 11.8-12.2 mm • 5/16 x 18, Thread L • M6, Thread L • 1/4 x 20, Thread L 13 mm 12.5 mm 12 mm 7.5 mm 8.7-9 mm • 5/16 x 16 Thread L • bolts For • in black, Available finish 13 mm 12.5 mm 12 mm 7.5 mm 8.7-9 mm 10 mm 12.5 mm 12 mm 7.5 mm 8.7-9 mm 20 mm 12.5 mm 12 mm 7.5 mm 8.7-9 mm 25 mm 12.5 mm 12 mm 7.5 mm 8.7-9 mm 13.5 mm 9.5 mm 19 mm 13 mm 10 mm 9.6-10 mm Connectors D Nut / Zinc Finish B Nut / Zinc Finish Hex Key (Allen Key) Connectors 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWAdrywaLLll face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete accessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware qty/box 2400 1800 2 Ø 0E0110C2g 0E0111C2g L 1 unit hz382VP hz382 hz38212vp hz38212 hz383vp hz383 hz38312vp hz38312 hz384vp hz384 Ø drilling Ø BOX unit hz516312VP hz516312 hz5164VP hz5164 hz5165VP hz5165 hz5166 unit TNZ1024M1 TNZ1024 TNZ1032M1 TNZ1032 B 8 hex key qty/box 25 1500 25 900 25 900 25 400 25 400 no. qty/box 25 1000 25 600 25 500 300 qty/box 1000 6000 1000 6000 Ø1 Ø2 finish zinc zinc zinc zinc zinc finish zinc zinc zinc • 5/16 x 18, Thread L 20 mm 14.5 mm 9.5 mm mm 11.2-11.5 25 mm 14.5 mm 10.5 mm mm 11.2-11.5 finish 0. TNZ3816M1) n0. T-NUT 3/8" (recommended . no lenGth 2" zinc 2-1/2" zinc 3" zinc 3-1/2" zinc 4" zinc lenGth 3-1/2" zinc 4" zinc 5" zinc 6" zinc Size 10-2410-24 zinc 10-32 zinc 10-32 zinc zinc qty/box 15000 qty/box 6000 4000 0E0103C2G 0E0107C2g 0E0108C2g unit TNZ1420M1 TNZ1420 TNZ3816M1 TNZ3816 TNZ51618M1 TNZ51618 unit unit unit hz516134VP hRHZ516312 hz14112vp hz516134 hz14112 hz5162VP hz14134vp hz5162 hz14134 hz516212VP hz142 hz516212 hz142vp hz5163VP hz14212vp hz5163 hz14212 hz143vp hz143 www.richelieu.com drilling Ø BOX drilling Ø BOX qty/box qty/box qty/box 25 800 25 2500 4500 25 25 2000 4000 25 3000 1500 25 25 25 1200 2000 25 1200 qty/box 1000 5000 1000 2000 1000 3000 6 hex key Zinc 4 hex key no. no. finish finish finish zinc zinc zinc zinc zinc zinc zinc zinc zinc

finish Ø1 Ø2 Ø1 Ø2

0. TNZ51618M1) n0. T-NUT 5/16" (recommended . 0. TNZ1420M1) n0. T-NUT 1/4" (recommended . . 5/16" . Size 1/4-201/4-20 zinc 3/8-16 zinc 3/8-16 zinc 5/16-18 zinc zinc 5/16-18 zinc no lenGth no lenGth no lenGth 1-3/4" zinc 1-1/2" zinc 3-1/2" zinc 2" zinc 1-3/4" zinc 2-1/2" zinc 2" zinc 3" zinc 2-1/2" zinc 3" zinc L • 8 x 32, Thread 10 mm 7.5 mm 5.5 mm 8-9 mm • 1/4 x 20, Thread L 13 mm 12 mm mm 7.5 8.7-9 mm 20 mm 12 mm mm 7.5 8.7-9 mm Hanger Bolt Hand Rail Bolt T Nut Finish:

E Nut / Zinc Finish Connectors Page 30

A Page 31

V VP boxes

drill bits

D A are included with are included FKCS14314VP FKCS14234VP FKCS14214VP FKCS14134VP FKCS14114VP unit 100 100 100 100 100 qty/box unit DZ316112VP DZ316112 DZ3162VP DZ3162 DZ316212VP DZ316212 . SKB23PK) . qty/box 25 5000 25 5000 25 3000 Yellow zinc Yellow zinc Yellow zinc Yellow zinc Yellow zinc (use bit no finish finish zinc zinc zinc 3-1/4" 2-3/4" 2-1/4" 1-3/4" 1-1/4" Ø 1/4" lenGth . 3/16" . no lenGth 1-1/2" zinc 2" zinc 2-1/2" zinc www.richelieu.com unit FKCS316114VP FKCS316134VP FKCS316214VP FKCS316234VP FKCS316314VP unit unit DZ142VP DZ516212VP Dz142 DZ516212 Dz14212VP DZ5163VP Dz14212 DZ5163 DZ516312VP DZ516312 qty/10 TMD316612PK qty/box 100 100 100 100 100 qty/box qty/box 25 25 3000 1500 25 25 2000 1250 25 1000 qty/1 TMD532312 TMD532312PK TMD532412 TMD532412PK TMD532512 TMD532512PK TMD316312 TMD316312PK TMD316412 TMD316412PK TMD316512 TMD316512PK . SKB23PK) . Flat head Square Hi-Lo The Condrive 1000 does it all. Step One: Insert the carbide-tipped drill bit and Step One: Condrive 1000 does it all. The Step drill. Then chuck of a standard hammer drill. or 1/2” adaptor into the 3/8” Insert Three: Step Slide the drive adaptor over your drill bit and adaptor. Two: fastener into the end of the drive adaptor. finish finish zinc zinc zinc zinc zinc finish Yellow zinc Yellow zinc Yellow zinc Yellow zinc Yellow zinc . 5/16" . . 1/4" . lenGth 1-1/4" 1-3/4" 2-1/4" 2-3/4" 3-1/4" Ø 3/16" (use bit no unit TCA1000 ø x length 5/32" x 3-1/2" 5/32" x 4-1/2" 5/32" x 5-1/2" 3/16" x 3-1/2" no lenGth no lenGth 3/16" x 4-1/2" 2-1/2" zinc 2" zinc 3/16" x 5-1/2" 3/16" x 6-1/2" 2-1/2" zinc 3" zinc 3-1/2" zinc Condrive Adaptor - Mortar Fastening System Flat Head Concrete Screw Carbide-Tipped Carbide-Tipped Masonry Drill Bit Concrete Accessories Head Type: Head Drive Type: Drive Thread: Wood Dowel Wood Screw Connectors Connectors 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly drywaDRYWAllLL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete ACCESSORIESaccessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware

E unit PB32PK PB33PK G unit SKB31PK SKB32PK SKB33PK SKB34PK

A EASY

T . 12, 14) 12, . . 12, 14) 12, . COLOR-

N FOR

ARE V

IDENTIFICATION qty/box D qty/box

BITS CODED A B A no 3 (use screw . . 3 (use screw no . no lenGth 2"3" 5 5 1"2"3" 5 4" 5 5 5 BLACK no lenGth unit PDB33PK unit PB21PK PB21PK25 PB22PK PB22PK25 PB23PK PB23PK25 unit SKB21PK SKB21PK25 SKB22PK SKB22PK25 SKB23PK SKB23PK25 SKB24PK SKB24PK25 SKB26PK SKB26PK25 SKB210PK . 8, 9, 10) 9, 8, . . 12, 14) 12, . . 8, 9, 10) 9, 8, . qty/box qty/box qty/box Drive Drive Bits description magnetic quick release quick release . 2 (use screw no . . 3 (use screw no . . 2 (use screw no . no lenGth 1"1"2" 5 2" 25 3" 5 3" 25 5 25 lenGth 3" 5 no RED no lenGth 1"1"2" 5 2" 25 3" 5 3" 25 4" 5 4" 25 6" 5 6" 25 10" 5 25 5 www.richelieu.com unit PB12PK PB13PK unit MBH14278 MBHQR14214 MBQR143 PDB2234PK PDB21PK unit SKB03PK SKB02PK SKB01PK unit unit SKB11PK SKB11PK25 SKB12PK SKB12PK25 SKB13PK SKB13PK25 SKB14PK SKB16PK . 8, 9, 10) 9, 8, . . 5, 6, 7) 6, 5, . . 3, 4) 3, . 7) 6, 5, . qty/box qty/box qty/box qty/box

. 2 (use screw no . . 1 (use screw no . . 1 (use screw no . . 0 (use screw no . REF. Size AB 1/4" x 2-7/8" B 1/4" x 2-1/4" 1/4" x 3" 2-3/4" 5 1" 5 no lenGth no lenGth 2"3" 5 5 3" 5 2" 5 1" 5 GREEN no YELLOW no lenGth lenGth 1"1"2" 5 2" 25 3" 5 3" 25 4" 5 6" 25 5 5 Page 32

Square Drive Bit Accessories Magnetic Bit Holder with Quick Release Pozi Drive Bit Phillips Phillips Drive Bit

1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWALL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete ACCESSORIES screws screws screws screws screws hinges, drawer screws accessories slides & hardware 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly drywaDRYWAllLL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete ACCESSORIESaccessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware Page 33 Screws for metal brackets Screws for nylon brackets PA516M1 PA14M1 PA316M1 qty/1000 ar J PA516 CA516J J PA14 CA14J J PA316 CA316J j unit QTY/BOX 50 50 50 50 500 500 500 500 500 500 500 500 ar 50 50 50 50 500 500 225 400 400 900 800 850 qty/j qty/box vp unit ma8svp ma8sj ma8l ma8lj ma8lC1 ma8lJ www.richelieu.com UNIT QTY/BOX 916858 916868 916969 916970 916971 916972 Anchors Anchors and Brackets green green blue blue yellow yellow finish finish unit 916855 916856 916857 916860 916861 916862 916863 916864 918011 918012 918013 918014 VP unit NA6SVP NA8L qty/box 50 200 50 150 100 150 white and tan color white tan white tan white tan finish metal metal metal metal metal metal qty/box 50 50 screw length gth screw len white .12, 14.12, 1" .12, 14.12, 7/8" .8, 9, 10 9, .8, 1" .8, 9, 10 9, .8, 7/8" .5, 6, 7, 8 7, 6, .5, 1" .5, 6, 7, 8 7, 6, .5, 7/8" no no no no no no screw size screw size olbe corner k olbe corner blac olbe corner light maple olbe corner clear maple screw length screw length .8.8.8 1" .8 1" .8 1-3/8" .8 1-3/8" 1-5/8" 1-5/8" .6 1-1/8" .8 1-5/8" 5/16" 5/16" 1/4" 1/4" 3/16" 3/16" caps white & includes screws & cover caps k & includes screws & cover blac caps light maple & includes screws & cover caps clear maple & includes screws & cover white k blac light maple clear maple for k fastcaps • style drawer fronts of shaker Quick and easy mounting • Made of nylon • to cover the screws with Fastcaps are also available Korners Kolbe description no no no no no no • style drawer fronts Quick and easy mounting of shaker • in 2 colors: Made of metal and available screw size • to cover the screws with Fastcaps are also available Korners Kolbe Description screw size drilling Size no ize drilling S no for k fastcaps ETAL CORNER (50PK) METAL for k fastcaps ETAL CORNER (50PK) METAL for k fastcaps K Screws & Caps FOR 50 PAC K Screws & Caps FOR 50 PAC ETAL CORNER (500PK) METAL ETAL CORNER (500PK) METAL Accessories Nylon Mounting Bracket Metal Mounting Bracket Metal Shield Anchor Wall Nylon Shield Plastic Conical Anchor Wall Plastic Plastic Shield Anchor Wall Drive Drive Bits Accessories 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly drywaDRYWAllLL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete ACCESSORIESaccessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware 3/4” 3/4” 1 1/4” 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1 3/4” 1/4" 1/4" 3/4" 3/4" 3/4" 13/16” 45ϒ 1 1/2” 5/16" 1 1/2” mP52230 mP52212 QTy/1000 MP52130 MP5212G QTy/1000 QTy/1000 MP5202G QTy/100 CP67132G Braces QTy/5000 CSR34Z cP52230 cP52212 QTy/100 CP52130 CP5212G QTy/100 QTy/100 CP5202G www.richelieu.com BP52230* BP52212* QTy/4 BP52130* BP5212G* QTy/12 QTy/12 BP5202G* QTy/25 csr34bpvP* csr34bzvp*

* Screws included * Screws included white painted white painted natural zinc • 1 1/2" x 1 1/2" x 13/16" finish zinc • 20 gauge • 3/4" x 3/4" x 1 3/4" finish • 19 gauge • 3/4" x 3/4" x 3/4" finish zinc * Screws included • 20 gauge • x 3/4" x 3/4" 3/4" finish • 19 gauge • 3/4" 3/4" x 3/4" x finish k painted blac * Screws included zinc brass Page 34 90° Metal Brace 90° Metal Brace 135° Metal Brace 90° Metal Brace

90° Metal Brace Accessories

E www.richelieu.com

G Braces A

A V required no screw

6112 6212 QTy/1000 D

97X40B 97X30B 97X25B 97X20B 97X15B 97X10B can be stapled, can be stapled, A 5/8" 4" x 7/8" 3" x 3/4" 2 1/2" x 5/8" 2" x 5/8" 1 1/2" x 5/8" 1" x 5/8" WIDTHLENGTH x NIT U 1 5/8" x 3 3/16" 1 5/8" x 3 3/16" dimensions QTy/100 QTy/1000 QTy/4500 CP52012030 MP52012030 52012030 BP607330* CP6073 6073 QTy/4 QTy/100 QTy/2500 QTy/4BP52001030* CP52001030 MP52001030 QTy/100 QTy/1000 * Screws included white white white color • Drilling distance : color white * Screws included • 1 13/16" x 1" x 5/8" color • 1" x 1" x 5/8" color white zinc zinc zinc zinc zinc zinc finish Accessories Plastic Corner Brace 16 mm Assembly Block 90° Plastic Brace 90° Plastic Brace 90° Metal Brace Braces Accessories 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly drywaDRYWAllLL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete ACCESSORIESaccessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware

D E

E 5/8"

for 1-1/8" M 2”

3-1/2" corner

mounting

E R 1 1/2” 1 3/16” 1 1/8” 13/16” 1 1/4” 1 11/16” 2 3/8” 3/4" 2 3/8” 3/4" 1000 QTy/box unit 109901 109902 109903 109904 Braces qty/box 100 501272G 169930 unit QTy/1000 unit 5322g www.richelieu.com CP87912 87912 QTy/100 QTy/500 5/8" x 1-1/8" 3/4" x 3-1/2" dimensions dimensions eliminates scribing

2 3/8" x 2 3/8" dimensions 1 3/16" x 2" x 1 11/16" 1 3/16" x 2" s dimension time investment in installation tools) easy to use (must have one

ART CLIPS X OF 250 SMART zinc zinc white color finish finish zinc • smart solution for applying backsplashes A • Simple, • in minutes Installs • Formfitting, • per box of 250 with screws Sold DESCRIPTION BO *6150-6310 #8 SCREW DEPTH GAUGE BAR *#5-B SPACING *SC-1 ROUTER BIT TOOLS *INSTALLATION • x 1 11/16" 2" x 1 3/16" finish Page 36 Plastic Brace Assembly Fitting Metal Corner Brace 'Smart Clip'

90° Metal Brace Accessories

not not

A V

humidity D

affected by A 9000 16000 13000 34000 14000 20000 19000 14000 25000 25000 QTy/bulk 40000 40000 11050N 11030N 11040N 14114N 38112N 835n 840n 850n 832n 830n bulk 525N 10630N 5000 6000 6000 10000 9000 11000 12000 qty/box 1000 QTy/box www.richelieu.com Dowels Dowels and Biscuits 11050 11030 unit QTy/bulk 25000 20000 1000 1000 1000 qty/box CF38 unit bulk mP14114 MP835 MP832 832 MP525 MP830 unit mp9835 mp9827 QTy/1000 CP90010 90010 Cp90020 90020 qty/100 CP90000 90000 BP14114 BP38112 MP38112 QTy/1000 MP8830MP8835 8830n 8835n qty/25 QTy/1000 plain FINISH size 1-1/4’’ 1/4” 10 mm 40 mm 10 mm 50 mm 3/8’’ 1-1/2’’ 8 mm8 mm 40 mm 50 mm 10 mm 30 mm 8 mm 35 mm 8 mm 35 mm 3/8" 8 mm 27 mm 8 mm 32 mm size 3/4” x 2-1/8”3/4” 10 x 2-3/8”7/8” 20 dimension 1/2” x 1-3/4” x 1-3/4” 1/2” 00 Ø length 8 mm8 mm 30 mm 35 mm Ø length Ø length 5 mm6 mm 25 mm 8 mm 30 mm 30 mm Accessories Corrugated Fastener Wooden Biscuit Wooden Plastic Dowel Pre-Glued Wooden Pre-Glued Dowel Wooden Wooden Dowel Wooden Braces Accessories 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly drywaDRYWAllLL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete ACCESSORIESaccessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware king The finishing touch is a The Fastcap professional job... is a self-adhesive cover cap made of durable PVC or unfinished/prefinished real It is avail- wood veneers. of able for a wide variety applications from covering fittings to trimming RTA out plumbing cut-outs in sink cabinets. Unlike other cover caps, other cover caps, Unlike these do not need to adhere perfectly to the screw for proper installation and do not require glue or caul are avail- They compound. able in several plain colors of and in PVC or a variety natural wood finishes that can be sanded and primed. The «problem» The «solution» Self adhesive qty/26000 91631540 91631534 91631530 qty/1040 qty/1040 91621540 916215ac 91621534 91621500 91621590 916215204 916215100 916215340 916215105 916215227 916215mdf 91621530 916215130 916215438 916215195 916215415 916215992 91621513 9162152095 916215687 916215418 916215408 916215321 916215331 916215218 916215749 916215386 916215428 916215706 PVC PVC Cover Caps www.richelieu.com qty/260 qty/260 91611540 916115am 916115ac 91611534 91611500 91611590 915115204 916115100 916115340 916115105 916115765 916115227 91611530 916115195 916115521 916115415 916115992 916115ht 916115IM 91611513 916115LM 916115LO 916115687 916115418 916115408 916115383 916115321 916115331 916115440 916115218 916115749 916115386 916115428 916115706 y grain colors) (wood Ø 14 mm - 9/16” , l) or meta (solid colors Ø 14 mm - 9/16” , y y y y y y y walnut y y

y walnut white

caps PVC cover wood grain colors caps PVC cover colors PVC solid almond american maple mn cherr autu antique BEECH k blac bourbon cherr k «FOG» gra dar clear maple » gra light «folkstone k cherr dar k red mahogany dar white finished MDF fuJI cherr l color meta brass brushed chrome golden cherr k golden oa hard rock maple cherr heritage imperial y pine knott light maple k light oa maple Manitoba medium cherr cherr natural k medium oa k oa natural k pickled oa presidential red mahogany k renaissance oa k rosewood oa select cherr white maple OTHER LABLE IN OTHER AVAI ALSO ARE CAPS COVER ABOVE THE *ALL OF AND SIZES BY SPECIAL ORDER COLORS PVC Cover Cap

Page 38 Accessories

1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWALL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete ACCESSORIES screws screws screws screws screws hinges, drawer screws accessories slides & hardware 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly drywaDRYWAllLL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete ACCESSORIESaccessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware Page 39 • Self-adhesive • PVC qty/400 91621090 91621030 qty/400 916210992 qty/18000 qty/720 918215AM 916218428 91631840 918215AC 916218227 916218FC 916218992 916218687 916218408 916218321 91618440 916218749 916218386 916218765 916218706 91631830 qty/2084 916215001 www.richelieu.com PVC PVC Cover Caps assortments qty/720 qty/180 91621840 91621890 916218100 916218105 91621830 916218IM y , Ø 25 mm - 1" (wood grain) , , Ø 25 mm - 1" (solid colors) , lid colors) Ø 18 mm - 11/16" (so , - 11/16" (wood grain) Ø 18 mm , y y y walnut y y x, PVC, Ø 14 mm (9/16”) PVC, x, y walnut caps PVC cover wood grain colors caps PVC cover PVC solid colors k blac white hard rock maple caps PVC cover caps PVC cover colors PVC solid wood grain colors almond american maple mn cherr autu K cherr DAR k blac k «FOG» gra dar » gra light «folkstone white k red mahogany dar fuji cherr hard rock maple imperial maple Manitoba cherr natural k oa natural presidential k renaissance oa k rosewood oa select cherr white maple sample bo • One sheet of each color description - 9/16” sample caps Ø 14 mm - 9/16” Cover Accessories PVC Cover Cap PVC PVC Cover Caps Accessories 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly drywaDRYWAllLL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete ACCESSORIESaccessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware 916918 Loaded ! with features 916917 acro depth adjust depth Macro *ALL THESE COVER CAPS ARE ALSO AVAILABLE AVAILABLE ALSO ARE CAPS THESE COVER *ALL AND SIZES BY SPECIAL ORDER COLORS IN OTHER Adjustable 1/8" pilot bit Stop collar spins freely Micro depth adjust • Self-adhesive Wood finish • Natural • CAN be sanded nished var • CAN be Insert your Ø15 mm screw plug. It will be flush with the surface, ready to be sanded as needed. It will be flush with the surface, qty/30 916115803 91621503m5 91621510m5 91621506 91621503 91621538 91621517 91621505 91621554 91621547 91621510 91621504 91621533 91621502 91621515 91621566 qty/1040 Wooden Cover Wooden Caps and Drill Bits surface

unit 916917 916918 qty/832 916215000 base

assortments stained and varnished your

www.richelieu.com with

flush

91611513M5 91611545m5 91611517m5 91611507m5 91611503m5 91611505m5 91611510m5 91611506 91611503 91611538 91611545 91611517 91611505 91611523 91611554 91611547 91611510 91611504 91611533 91611502 91611527 91611507 91611515 91611566 qty/260 can be sanded, caps , Ø 14 mm - 9/16” , , Ø 42 mm - 1-5/8" (wood grain) ,

, Ø 14 mm (9/16”) , cover

your

reaches the right depth. wood

x, x, y y installing

Drill your board. The bit will stop when it The Drill your board.

or sapele teak • Unfinished or prefinished, pine white birch ash maple species (prefinished) k red oa k white oa white birch walnut teak sapele k red oa pine pecan birch natural maple mahogany hick fir ash Cherr anigre alder - 9/16” sample caps Ø 14 mm - 9/16” Cover description sample bo • One sheet of each species Drill bit adjustable ment drill bit replace • For caps Ø 14 mm - 9/16” Drill bitS for cover description caps Wooden cover finished) species (un caps Wooden cover SPECIES (UNFINISHED) birch natural Page 40

Wooden Cover Wooden Cap Accessories

1 2 3 4 5 6 7 8 9 10 11 12 13 assembly DRYWALL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete ACCESSORIES screws screws screws screws screws hinges, drawer screws accessories slides & hardware 1 2 3 4 5 6 7 8 9 10 11 12 13 assembly drywaDRYWAllLL face frame installation drawer front screws for euro screws handle & knob metal screws joint fasteners CONNECTORS concrete ACCESSORIESaccessories screws screws screws screws adjusters hinges, drawer screws accessories slides & hardware Page Page 4141 1/4" 3/16" 3/16" 1/2" 1/2" 1/2" 9/16" 11/16" 3 12 1,98 www.richelieu.com Finishing Finishing Cup and Washers Cover Caps . 2 . qty/box 30000 20000 20000 18000 8000 . 6 . 8 . qty/11000 qty/400 qty/200 67130 67180 qty/1000 MP760090 qty/1000 mp750065 mP7500992 mP7500LO kit of 2 pieces kit of 2 pieces 720030 box FCN6 FCN14 qty/1000 qty/100 qty/100 qty/100 cP750040 MP750040 cP750060 MP750060 & 8, for screws no.6 qty/1000 FCN8M1 FCN8 FCN10M1N10 FC FCN12M112 FCN & 8, for screws no.6 qty/100 qty/8 BP66130 CP66130BP66180 66130 CP66180 66180 W ø x H x 1,98 x 3 x 12 QTY/5000 qty/25 BP760030 CP760030 MP760030 qty/25 BP750030 CP750030BP750040 MP750030 BP750090 CP750090BP7500100 CP7500100 MP750090 MP7500100 BP7500105 CP7500105 MP7500105 qty 700 Ø 1/2" Ø 1/2" 1/2" 1/2" 1/2" 1/2" qty/8 BP72530 CP72530 MP72530 72530 Ø 1/2" Ø 1/2" 11/16" 11/16" y 1/2" AR exterior diameter, J FCN8J exterior diameter, y 1/2" white caps for Phillips drive no Plastic cover color butterscotch drive no caps for square Plastic cover color color white drive no caps for square Plastic cover color white finish kblac 1/2" almond brown brass finish nickel • 1/2” kblac 1/2" klight oa 1/2" gra light gra maple brass white nickel • to no.10 screws no.6 For • 11/16” size #6 #8 #10 #12 #14 Accessories Plastic Cover Cap Metal Cover Cap Nickel Nickel Plated Finishing Cup Washer Wooden Cover Wooden Caps and Drill Bits Accessories H = 3/16” WOOD WOOD n llatio cabinet insta unit 005 W mP149B150 h = 5/16" QTy/100 QTy/1000 wood shop unit 004 Wooden Hole Wooden Plugs and Fastener Kits Wooden Hole Wooden Plugs & T-Nuts QTy/25 BP150B150BP149B150 CP150B15 CP149B15 MP150B15 BP151B150BP152C250BP154C250 CP151B15BP153C250 CP152C25 MP151B15 CP153C25 MP152C25 MP153C25 mp156150 mp157150 mp159150 mp160150 mp156250 mp157250 mp159250 mp160250 www.richelieu.com bp156150 bp157150 bp159150 bp160150 bp156250 bp157250 bp159250 bp160250 W x H x Ø 1/2" x 3/16" x 3/8" 5/8" x 3/16" x 7/16" 5/8" x 3/16" x 1/2" 1/2" x 3/16" x 3/8" 5/8" x 3/16" x 7/16" 5/8" x 3/16" x 1/2" W x H1/4" x 5/16" 5/16" x 5/16" QTy/253/8" x 5/16" 1/2" x 5/16" QT y/1000

• = Plug diameter / H = Drilling depth W species maple maple maple maple koa koa koa 1/4" x 5/16" koa 5/16" 5/16" x 3/8" x 5/16" 1/2" x 5/16" • / Ø = Drilling size / H = Drilling depth W = Plug diameter species maple maple maple k oa k oa k oa hinge / hardware unit 003 Page 42 Wooden Hole Wooden Plug

Fastener Kit Accessories