DOCSLIB.ORG

User Documentation

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
User Documentation USER DOCUMENTATION VERSION 1.4.18_3 16 August 2005 This document is intended for introduction and working guidance for those who use the program in their work to update the ST61 records. FOR FURTHER ENQUIRIES PLEASE CONTACT: ERO Peblingehus, Nansensgade 19 DK-1366 Copenhagen, Denmark Tel: +45 33 89 63 00 Fax: +45 33 89 63 30 E-mail: [email protected] or [email protected] 1 2 Table of contents 1. Introduction......................................................................................................... 4 1.1 Background for the creation of the software................................................... 4 1.2 Update of entries in St61 and Ge89 ................................................................ 4 1.3 Main principles of the software ...................................................................... 4 1.4 About this user manual ................................................................................... 5 2. Background on ST61 notice................................................................................ 5 3. Setting up and running the tool........................................................................... 5 3.1 Installing and maintaining the tool ................................................................. 5 3.2 Setting up........................................................................................................ 7 4. Running the tool.................................................................................................. 9 4.1 Starting with the tool....................................................................................... 9 4.2 Identification of TVA and ST61 matching records ...................................... 15 4.3 Modifications of the records ......................................................................... 21 4.4 Export of the records..................................................................................... 24 4.5 Review of the Process................................................................................... 26 4.6 Validation of XML File ................................................................................ 27 Annex 1: Comparison of the location ....................................................................... 29 Annex 2: Comparison between TVA and ST61 records .......................................... 30 Annex 3: ST61 relevant records definition............................................................... 37 3 1. Introduction 1.1 Background for the creation of the software The transition from analogue to digital terrestrial television is probably the most significant revolution in broadcasting technology since the introduction of the terrestrial video broadcasting. Introduction of DVB-T brings some genuine benefits such as enhanced picture quality and the portable reception. Besides, the digital television will free us from some of the constraints associated with the analogue systems, such as the lack of the spectrum capacity and high demands for protection against interference. Many important questions, such as migration strategy, optimal network planning methodology and spectrum management in the mixed analogue/digital environment, still have to be answered. This is particularly important in the light of the ITU Regional Radiocommunications Conference (RRC04/06) for planning of the digital terrestrial broadcasting service in the frequency bands 174-230 and 470-962 MHz. It is very important for all data used in the planning process to be accurate, up to date and available at the foreseen dates, according to the timetable agreed at the RRC-04 (Resolution COM5/1). Administrations have a task to update their entries in the ST61 and Ge89 Plans as well as in MIFR, and to create requirements for digital broadcasting. 1.2 Update of entries in St61 and Ge89 Information on analogue assignments to be protected during the planning process (if any) or to be protected during the transition period will be taken by the ITU-BR from the updated ST61 and Ge89 plans. Assignments that are not recorded in either of the plans will not get any protection, regardless of that station may be in operation for years based on a bilateral or multilateral agreements. It is important that administrations start as soon as possible with the process of updating their assignments in the plans. The update involves addition or modification of assignments and also the deletion of obsolete records. 1.3 Main principles of the software In CEPT the most accurate and up to date information about the analogue television assignments exists in the form of TVA files that have been collected by ERO in the process of implementation of Chester ’97 Agreement. In order to make possible to use the TVA files in the process of updating ST61 entries, the following software tools are necessary: • software to extract records from BRIFIC CD-ROM (MS Access data format); • software to compare and identify differences between the TVA records and ST61 assignments; • software for review and possibly modify data to be submitted to the update of ST61 procedure; • software to generate new record based on TVA files to update ST61 plan; • software to generate an electronic notice (XML format described in ITU CR/120). The validation of the electronic form may then be done by using TeRaNV developed by the BR. This software is available on the itu website (www.itu.int) when installing BRIFIC. The TerRaNV software is included with BR IFIC (Terrestrial services). Administrations can use it to check their electronic notices prior to submitting them to BR. 4 1.4 About this user manual This User Manual covers the following points: • Background on ST61 notice • Explanation of general principles and architecture of the software, • A simple example of setting up and running the software; • Explanation of all input parameters of the software in detail and their function; 2. Background on ST61 notice VHF/UHF broadcasting sound and television stations shall be notified by administrations according to the format defined in Circular Letter 120 (CR/120). This Circular letter may be found using the link: http://www.itu.int/md/meetingdoc.asp?lang=e&parent=R00-CA-CIR-0120&type=sitems The Circular Letter provides information on the meaning of each of the fields contained in the notice for VHF sound broadcasting station“T01 notice” and for television broadcasting station “T02 notice”. 3. Setting up and running the tool This section provides information to set up and on data used to run the software. 3.1 Installing and maintaining the tool The software is executable file distributed free of charge by the ERO and may be downloaded from the ERO Website at: http://www.ero.dk/sw/st61-tva-comp In case of problems with downloading a file of such size, please contact the ERO for assistance. The tool must be downloaded from the ero server and copy on the hard disk. It can be run directly without any further installation. The User may need to change his “Regional Parameter” to ensure compatibility with the number format used in the BRIFIC database. 5 Figure 1: Regional Parameters Some “DLL” may be missing on the computer’s user; in this case, it is necessary to update the relevant program by using the installation program Figure 2: Installation Program to update “dll” 6 Figure 3: Installation Program 3.2 Setting up The tool provides results of comparison based on the data available within ITU-R and on the ERO web site (TVA files). 3.2.1 BRIFIC The tool uses some data bases provided in the ITU-R data bases and called BRIFIC (BR International Frequency Information Circular). BRIFIC is a service document in CD-ROM format, published once every two weeks by the Radiocommunication Bureau in accordance with provision Nos. RR20.2 to RR20.6 and No. RR20.15 of the Radio Regulations (see publication notice 282-04) . The BR IFIC (Terrestrial Services) consists the following: • The database TerRaSys, composed of: – the Master International Frequency Register – the assignment/allotment plans for terrestrial services – notices undergoing RR Article 11 processing – notices undergoing processing pursuant to a regional agreement. • The characteristics provided with notices submitted pursuant to RR Article 9 (these notices are not processed in TerRaSys). • The TerRaQ program for querying the published information. • The TerRaNV program for checking electronic notices. • The BR IFIC preface. This data bases may be obtained by administrations from the ITU-R (www.itu.int). The user has to install BRIFIC before starting to use the ERO tool. 3.2.2 TVA files The tool uses TVA files that can be downloaded from the ERO server using EDSB (European Database System for Broadcasting). If you do not have any user account yet and you are a member of one of the CEPT administrations, please contact ERO at [email protected] and a user account will be set up for you. 7 Figure 4: Download TVA files from EDSB TVA files are also available on the ERO ftp server. The format of TVA records is described in ECC Report 35. 8 Figure 5: Download TVA files from EDSB 4. Running the tool The section is oriented mostly towards the new users. It provides a step-by-step introduction to run the software. 4.1 Starting with the tool When the tool is launched, the following window is displayed. 9 Figure 6: Start with the Tool – Comparison In the main window, executed directly when the access executable file is launched, shows the following main options to the user: Create Work Database allows the user to start a new comparison between a selected
Load more

Recommended publications
  • H0 STET LER LQPCKET File Copy ORIGINAL
    BAKER & H 0 S T E T LER LQPCKET FilE copy ORIGINAL COUNSELLORS AT LAW WASHINGTON SQUARE, SUITE 1100 • 1050 CONNECTICUT AVENUE, N.W. • WASHINGTON, D.C. 20036-5304 • (202) 861-1500 FAX (202) 861-1783 WRITER'S DIRECT DIAL NUMBER (202) 861-1624 December 17, 1997 VIA HAND DELIVERY Ms. Magalie Roman Salas Secretary Federal Communications Commission 1919 M Street, N.W. Room 222 Washington, D.C. 20554 Re: Advanced Television Systems and Their Impact upon the Existing Television Broadcast Service MM Docket No. 87-268 Comments Dear Ms .. Salas: We are transmitting herewith the original and five copies of the comments of Scripps Howard Broadcasting Company in the above­ captioned proceeding. The comments are filed pursuant to the Commission's Public Notice of December 2, 1997. Please contact the undersigned if you have any questions. Donald Enclosures (JJ-~ No. of Copies rec'd_. _ List ABCDE ORLANDO, FLORIDA CLEVELAND. OHIO COLUMBUS, OHIO DENVER. COLORADO HOUSTON. TEXAS LONG BEACH, CALIFORNIA Los ANGELES. CALIFORNIA (216) 621-0200 (614) 228-1541 (303) 861-0600 (713) 751-1600 (562) 432-2827 (213) 624-2400 (407) 649-4000 Before the DOCKET ALE CQPY ORlGlNAL FEDERAL COMMUNICATIONS COMMISSION Washington, D.C. 20554 In the matter of ) ) FCC SEEKS COMMENTS ON FILINGS ) ADDRESSING DIGITAL ) TV ALLOTMENTS, PUBLIC NOTICE ) dated December 2, 1997 ) TO: The Commission COMMENTS SUBMITTED BY SCRIPPS HOWARD BROADCASTING COMPANY These comments by Scripps Howard Broadcasting Company (SHBC) are in response to the PUBLIC NOTICE from the Federal Communications Commission (FCC) dated December 2, 1997 and signed by Richard M. Smith, Chief, Office ofEngineering and Technology.
    [Show full text]
  • Experimental Results of Network-Assisted Interference Suppression Scheme Using Adaptive Beam-Tilt Switching
    Hindawi International Journal of Antennas and Propagation Volume 2017, Article ID 2164038, 10 pages https://doi.org/10.1155/2017/2164038 Research Article Experimental Results of Network-Assisted Interference Suppression Scheme Using Adaptive Beam-Tilt Switching Tomoki Murakami,1 Riichi Kudo,1 Koichi Ishihara,1 Masato Mizoguchi,1 and Naoki Honma2 1 NTT Access Network Service Systems Laboratories, Nippon Telegraph and Telephone Corporation, Yokosuka, Japan 2Faculty of Engineering, Iwate University, Morioka, Japan Correspondence should be addressed to Tomoki Murakami; [email protected] Received 4 October 2016; Accepted 18 April 2017; Published 14 May 2017 Academic Editor: Ahmed Toaha Mobashsher Copyright © 2017 Tomoki Murakami et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This paper introduces a network-assisted interference suppression scheme using beam-tilt switching per frame for wireless local area network systems and its effectiveness in an actual indoor environment. In the proposed scheme, two access points simultaneously transmit to their own desired station by adjusting angle of beam-tilt including transmit power assisted from network server for the improvement of system throughput. In the conventional researches, it is widely known that beam-tilt is effective for ICI suppression in the outdoor scenario. However, the indoor effectiveness of beam-tilt for ICI suppression has not yet been indicated from the experimental evaluation. Thus, this paper indicates the effectiveness of the proposed scheme by analyzing multiple-input multiple- output channel matrices from experimental measurements in an office environment.
    [Show full text]
  • Uhf Slot Antenna
    UHF SLOT ANTENNA PROSTAR SERIES Proven performance, quality and reliability Rugged construction Directional patterns standard & custom High power rating to achieve 5 megawatts Custom electrical & mechanical beam tilt Horizontal, circular & elliptical polarization ELECTRICAL SPECIFICATIONS Polarization Horizontal, Elliptical, Circular Power Rating 1 kW to 90 kW Beam Tilt As specified by customer Null Fill As specified by customer Input Impedance 50 or 75 ohm VSWR 1.1:1 or better across band 6340 Sky Creek Dr, Sacramento, CA 95828 | T: 916.383.1177 | F: 916.383.1182 JAMPRO.com UHF SLOT ANTENNA SELECTING YOUR SLOT ANTENNA Compatible with DTV, NTSC and PAL Broadcasts JA-LS: 1 kW JAMPRO’s LOW POWER slot antenna is designed with the needs of low power UHF broadcasters in mind. Aluminum construction ensures excellent weather resistance while residing windload and weight on the tower. The unique design of the low power UHF slot antenna can be configured to provide varying levels of vertically polarized signal. The versatility of the slots allows them to be top, leg or face mounted. JA-MS: 1 to 30 kW JAMPRO’s JA/MS is the harsh environment version of the JA/LS antenna. The JA/MS is also enclosed by white UV resistant radomes for added protection from the environment. The JA/MS is an excellent choice for low power UHF broadcasters located in areas with heavy air pollution or high salt content in the air. JSL-SERIES: 5 to 40 kW JAMPRO’s Premium LOW POWER slot antenna, using marine brass, copper and virgin Teflon in construc- tion, is the finest antenna of its type.
    [Show full text]
  • R&D Report 1965-08
    -- --------~ ---~------------'"-~~~~-----~ -----..:.-....-~---------"'--'---~--:~~---~-- RESEARCH DEPARTMENT SPECIFICATION OF THE IMPEDANCE OF TRANSMITTING AERIALS FOR MONOCHROME AND COLOUR TELEVISION SIGNALS Technological Report No. E-ll5 (1965/8) D.J. Why the , B.Sc.(Eng.), A.M.LE.E. for Head of Research Department --~-~ ------~:..~-~-~- ---- --------------- -- --------~-------- This Report Is the property ot the British Broadcasting Corporation and may not be reproduced in any form .ithout the written permission o~ the Corporation. - --". - - ~ ---------~------------- ~---~--.----------~~ -.:-'-. Technological Report No. E-115 SPECIFICATION OF mE IMPEDANCE OF TRANSMITTING AERIALS FOR MONOCHROME AND COLOUR TELEVISION SIGNALS Section Title Page SUMMARY ... 1 1. INTRODUCTION 1 2. 405-LINE MONOaIROME SYSTEM 2 2.1. Short-delay Reflexions. 2 2.2. Long-delay Reflexions . 2 3. 625-LINE MONOaIROME SYSTEM 3 3.1. Application of 405-line Results 3 3.2. Short-delay Reflexions 3 3.3. Long-delay Reflexions 4 4. 625-LINE COLOUR SYSTEM 4 4.1. General . 4 4.2. Short-delay Reflexions 5 4.3. Long-delay Reflexions 5 4.3.1. General 5 4.3.2. Subj ecti ve Tests 5 4.3.3. Results of Subjective Tests. 8 4.3.4. Resulting Specification 10 5. REFLEXIONS DUE TO FEEDER IRREGULARITIES 11 6. APPLICATION TO PRACTICAL INSTALLATIONS 12 6.1. The Aerial Impedance Specification . 12 6.1.1. The Effect of Loss in the Feeder and Combining Filters. 12 6.1.2. The Effect of Loss in Re-reflexion at the Transmitter. 12 C~~~~_~~_~ ________: ______ ~ ________ ~~~ ___ ~~ _______ ~ __ ~~ _______ ~ __ ~ _______ ~~ __ _ Section Title Page 6.2. Specification of Reflexions due to Feeder Irregulari ties,. 14 6.2.1.
    [Show full text]
  • Antenna Design for Future Broadcast Technology
    BROADCAST ANTENNA DESIGN TO SUPPORT FUTURE TRANSMISSION TECHNOLOGIES John L. Schadler Director of Antenna Development Dielectric L.L.C. Raymond, ME. Summary done by increasing the beam tilt at one site in order to reduce the amount of coverage area and thus the amount It doesn’t matter what future television transmission of traffic within that cell and avoid inter-cell interference technology is being discussed for the new ATSC3.0, they with neighboring cells. New groups of sites are then all have one thing in common, the need for higher data installed to fill in the gaps. The smaller cells allow for a rates and more channel capacity. Broadcasters will greater level of frequency re-use providing more channels become “Bit Managers” knowing that more power per unit coverage area. equates to higher quality of service (QoS). With broad industry consensus, assumptions can be made about next Although the method will be different, the idea of future generation systems. In general they will be based on proofing a high power broadcast antenna in anticipation orthogonal frequency division multiplexing (OFDM) of next generation broadcast requirements should be synchronous single frequency networks (SFN) limited considered. In any of the proposed next generation within the current coverage footprint as defined by the systems, the digital bandwidth is not limited by the FCC and will have the flexibility to support capacity number of users, but by the data rate supported within a growth. As a result of post-auction repack there is likely given carrier to noise ratio (C/N). Increasing the capacity to be more co-located channel sharing requiring is not done by reducing the traffic, but by increasing the broadband antenna systems with the central high power amount of throughput that can be delivered.
    [Show full text]
  • Download PDF (476K)
    IEICE Communications Express, Vol.6, No.6, 405–410 Performance enhancement by beam tilting in SD transmission utilizing two-ray fading Tomohiro Seki1a), Ken Hiraga2, Kazumitsu Sakamoto2, and Maki Arai2 1 College of Industrial Technology, Department of Electrical and Electronic Engineering, Nihon University, 1–2–1 Izumicho, Narashino 275–8575, Japan 2 NTT Network Innovation Laboratories, NTT Corporation, 1–1 Hikarinooka, Yokosuka 239–0847, Japan a) [email protected] Abstract: A method is proposed for enhancing the transmission perform- ance in a spatial division transmission system that utilizes the fading characteristics of two-ray ground reflection propagation. The method is tilting the elevation angle of antenna beams purposely towards out of the communicating peer. Using ray-tracing simulation, it is shown that the performance of the system is significantly improved when high-gain anten- nas with narrow beamwidth are used. Keywords: two-ray fading, parallel transmission Classification: Antennas and Propagation References [1] K. Hiraga, K. Sakamoto, M. Arai, T. Seki, T. Nakagawa, and K. Uehara, “Spatial division transmission without signal processing for MIMO detection utilizing two-ray fading,” IEICE Trans. Commun., vol. E97.B, no. 11, pp. 2491–2501, 2014. DOI:10.1587/transcom.E97.B.2491 [2] C. Cordeiro, “IEEE doc.:802.11-09/1153r2,” p. 4, 2009. [3] Wilocity: Wil6200 Chipset Datasheet. [Online]. http://wilocity.com/resources/ Wil6200-Brief.pdf. [4] W. L. Stutzman, “Estimating directivity and gain of antennas,” IEEE Antennas Propag. Mag., vol. 40, no. 4, pp. 7–11, Aug. 1998. DOI:10.1109/74.730532 [5] D. Parsons, The Mobile Radio Propagation Channel, ch.
    [Show full text]
  • Dielectric • 22 Tower Rd., Raymond, ME 04071 USA • +1 207-655-8100
    DIE 18331 - TV Planner:9998_DTV Brochure_2003 12/21/16 12:44 PM Page 1 Dielectric • 22 Tower Rd., Raymond, ME 04071 USA • +1 207-655-8100 • www.dielectric.com • TVPlanner07/2013 1 DIE18331 TV Planner_12-30-2013:9998_DTV Brochure_2003 12/30/13 12:14 PM Page 1 Dielectric Communications: Advancing Full System Solutions the frontier Since our inception in 1942, we have considered ourselves a solutions oriented engineering company, priding ourselves on our depth of scientific in broadcast experience and knowledge. Clients approach us with broadcast needs and we communications deliver full system solutions, jointly tasking with client engineering staff design technologically advanced systems. We design and manufacture full broadcast for over seven systems from the transmitter output to the tower top. decades. A Culture of innovation spanning over seven decades. Dielectric’s leadership in passive RF technologies is reflected in the expertise we offer and the recognition we’ve received: over 100 patents, 2 emmys for technical innovation, 4 NAB Pick hits, to name a few. Dielectric offers the customized support services and planning tools you need to build your television antenna from configuring a new antenna system, to acquiring knowledgeable insights into specific technical issues, Dielectric resources provide easy access to the assistance you needed. This includes customized support services, as well as planning tools to guide in the design. Call Us This fifth edition of our television planning guide details the systems and components we produce. Call us about your requirements or any of our broad- cast products at 1-800-341-9678. Products contained in this catalog may be covered by one or more of the following patents: 6,917,264; 6,903,624; 6,887,093; 6,882,224; 6,870,443; 6,867,743; 6,816,040; 6,703,984; 6,703,911; 6,677,916; 6,650,300; 6,650,209; 6,617,940; 6,538,529; 6,373,444; 6,320,555; 5,999,145; 5,861,858; 5,455,548; 5,418,545; 5,401,173; 5,167,510; 4,988,961; 4,951,013; 4,899,165; 4,723,307; 4,654,962; 4,602,227.
    [Show full text]
  • Analysis of Antenna Beam-Tilt and Broadcast Coverage
    Analysis of Antenna Beam-tilt and Broadcast Coverage Myron D. Fanton, PE Electronics Research, Inc. Abstract—Antenna beam tilt affects areas covered by strong signals. The energy density, S, at a distance, R, from the antenna is given Improvements greater than 10dB are realized using greater beam- by the following equation [2], tilts offered in end-fed arrays. P Index Terms—Antenna Arrays, Antenna Beam Tilt, Coverage, S = (1), Propagation 4πR 2 I. INTRODUCTION where P is the ERP of the antenna at the elevation angle of interest. overage is the key parameter in broadcast system engineering. A great deal of effort is exerted to position the C 0.00 antenna and select antenna patterns to enhance the signal at the 1.5 Deg. Beam Tilt receiver. Many analyses of propagation to date have not 0.5 Deg. Beam Tilt accounted for antenna beam-tilt, though now technology, 0 Deg. Beam Tilt products, and analytical techniques [1] can optimize the coverage with increased beam-tilt. -5.00 II. SMOOTH EARTH PROPAGATION Amplitude on Ground (dB) Associating the elevation pattern of an antenna with the -10.00 distance from the transmitter site provides an understanding of the key areas of the pattern. A mapping of elevation angle and distance from the transmitter is shown in Figure 1. The Standard (4/3) Radio Horizon is also noted on the plot. -15.00 For typical tower heights, the radio horizon occurs at 90 80 70 60 50 40 30 20 10 0 Elevation Angle (Degrees) elevation angles between 0.1 and 1 degrees and distances of 10 to 100 miles.
    [Show full text]
  • Antennas - Catalogue 19
    ANTENNAS - CATALOGUE 19 KATHREIN Broadcast GmbH Ing.-Anton-Kathrein-Str. 1–7 83101 Rohrdorf, Germany www.kathrein-bca.com [email protected] TOTAL QUALITY MANAGEMENT INDEX FM Antennas 3 VHF Antennas 39 UHF Antennas 63 Technical Notes 81 1 FM ANTENNAS INDEX FM-03 H 5 FM-03 V 9 FM-04 13 FM-05 H 15 FM-07 19 FM-34 21 FMC-01 22 FMC-01/R 24 FMC-03 26 FMC-05 30 FMC-06 34 FMC-06/R 36 FM ANTENNAS 3 FM-03 (Horizontal polarization) FM PANEL ANTENNA FEATURES • horizontal polarization • broadband 87.5 ÷ 108 MHz • 7.5 dB gain • directional pattern • suitable as a component in various arrays on square towers • stainless steel dipoles • suitable also for vertical polarization RADIATION PATTERNS (Mid Band) ELECTRICAL DATA ANTENNA TYPE FM-03 FREQUENCY RANGE 87.5 ÷ 108 MHz IMPEDANCE 50 ohm CONNECTOR 7/8” EIA MAX POWER 5 kW VSWR ≤ 1.15 POLARIZATION Horizontal GAIN (referred to half wave dipole) 7.5 dB E-Plane ± 34° HALF POWER BEAMWIDTH H-Plane ± 30° LIGHTNING PROTECTION All Metal Parts DC Grounded MECHANICAL DATA 2200 x 2000 x 991 DIMENSIONS mm (in) (86.61 x 78.74 x 39.02) WEIGHT kg (lb) 61 (134.5) 1.40 (15.1) front WIND SURFACE m2 ( ft2) 1.01 (10.9) side WIND LOAD kN (lbf) 1.76 (396) front at 160 km/h (100 mph) 1.25 (281) side MAX WIND VELOCITY km/h (mph) 270 (167.8) Reflector (hot dip galvanized steel) Dipoles (stainless steel) MATERIALS Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) ICING PROTECTION Feed point radome RADOME COLOUR Grey (standard) MOUNTING Directly on supporting mast Specifications are subject to change without prior notice FM ANTENNAS 5 FM-03 (Horizontal polarization) FM PANEL ANTENNA FEATURES • radiating systems with FM-03 panel • high power systems • omnidirectional or directional patterns • equal or unequal split ratio power distribution network FM-03/32 (8x4) GUANGZHOU, P.R.C.
    [Show full text]
  • Criteria for Conically-Scanned
    Criterw for radiation patterns, cross-over g((in. and mO(/lIlfllion s(Jnsitivity arc analyz.ed for conical-scan-type tracking antennas llsing ((lI1plitllde- or P//(/S('-coll1parison methods. It is shmL'n that the radiation patterns of interest are 1Iut, as gencrall\' believed, the individual static patterns, bllt their RF vector slim and difference. T . C. Cheston A method of meas1lring these Sllm and difference patterns is suggested. C riteria for CONICALLY-SCANNED TRACKING ANTENNAS racking antennas often obtain high angular BORESIGHT T resolution by a time-sequential lobe-compari­ son method. The radiation pattern is scanned r- BEAM SEPARATION 20 \4 . (nutated) about the boresight direction in such taG LOSS IN FORWARD GAIN a way that it traces out a cone, a method called conical scanning. Figure I shows two radially opposite positions of the radiation pattern. When the target is in the boresight direction, a continuous-wave (cw) signal is obtained. When the target is off boresight, the signal is ampli­ 8- tude-modulated at the nutation frequency; the magnitude and phase of that modulation define the direction of the target. In this discussion, the tracking antenna will be considered as a re­ Fig. I-Lobe comparison-static patterns. ceiving antenna, with the target separately illu­ minated. and modulation sensitivity in the boresight, or cross-over, region. Such other characteristics as Introduction sidelobe structure are irrelevant under these RADIA TIO P ATTERNS-The an tenna tracks after conditions. having acquired the target. In this way, the tar­ The complete radiation pattern characteristics get is always, at least approximately, in the bore­ are of interest only if one or more additional sight direction.
    [Show full text]
  • Advanced Antenna Technology
    1/135 TABLE OF CONTENTS 1. BACKGROUND AND SCOPE OF WHITEPAPER ........................................................................................... 14 2. BASE STATION ANTENNA EVOLUTION ........................................................................................................ 19 2.1. EARLY TECHNOLOGY ........................................................................................................................................... 19 2.2. CURRENT TECHNOLOGY ....................................................................................................................................... 20 2.2.1. Extensive Usage ................................................................................................................................. 20 2.2.2. Moderate Usage ................................................................................................................................. 21 2.2.3. Advanced Antenna Technology .......................................................................................................... 22 2.2.4. MIMO Systems ................................................................................................................................... 23 2.2.5. Reconfigurable Beam Antenna ........................................................................................................... 24 2.2.6. Active Antenna .................................................................................................................................... 25 2.3. COMPARISON TABLE—ANTENNA
    [Show full text]
  • A Twelve-Beam Steering Low Profile Patch Antenna with Shorting Vias for Vehicular Applications
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE IEEE Transactions on Antennas and Propgataion: Final checks and corrections are being performed provided by University of Essex Research Repository A Twelve-Beam Steering Low Profile Patch Antenna with Shorting Vias for Vehicular Applications Arpan Pal, Member, IEEE, Amit Mehta, Senior Member, IEEE, Dariush Mirshekar-Syahkal, Fellow, IEEE, Hisamatsu Nakano, Life Fellow, IEEE inevitable losses) and complex signal processing for their operation. Therefore, they are not suitable for low price modern Abstract—A low-profile twelve-beam printed patch antenna is commercial portable wireless transceivers. presented for pattern reconfigurable applications. The patch is As an alternative, single element Beam Steering Antennas fed at the four sides using coaxial feeds. Diagonal lines of vias are (BSAs) [5]-[21] have been proposed recently for manoeuvring inserted on the patch surface to restrict currents to the edges. Whilst majority of patch antennas have an axial beam pattern, the antenna radiation beam in space. Being single element, these proposed antenna produces twelve different tilted beams. When antennas are small, lightweight, require small signal processing one of its four feeds on the sides is excited and the remaining feeds and either need no or diminutive phase shifters. The rectangular are open circuited, the antenna generates a linearly polarized spiral antenna [5]-[8] was the initial one in this class. To steer tilted beam (6.2 dBi, θmax = 30°). This beam is directed away from its beam, the current distribution over the spiral arm is varied feeding patch corner. Therefore, the antenna can steer its tilted using switches, but the antenna has limited beam steering beam in four different space quadrants in front of the antenna by exciting one feed at a time.
    [Show full text]