MICHELIN® X® TWEEL® All Terrain

Total Page:16

File Type:pdf, Size:1020Kb

MICHELIN® X® TWEEL® All Terrain MICHELIN ® X ® TWEEL® SSL Airless Radial Tire Designed for use on skid steer loaders The All Terrain model is ideal for use on a wide range of surfaces while the Hard Surface and Hard Surface Traction models help provide maximum tread life on pavement. þ No Maintenance þ No Compromise þ No Downtime ® ® ® MICHELIN X TWEEL SSL MICHELIN® X® TWEEL® All Terrain No Maintenance – MICHELIN® X® TWEEL® SSL is one single unit, replacing the current tire/wheel/valve assembly. There is no need for complex wheel/ tire mounting equipment. Once they are bolted on, there is no air pressure to maintain. No Compromise – Productivity can be increased because the MICHELIN X TWEEL SSL provides greater stability and enables a skid steer to work faster with more comfort for the operator, reducing driver fatigue while improving MICHELIN® X® TWEEL® Hard Surface productivity. The MICHELIN X TWEEL SSL delivers a consistent footprint with strong wear life that is two to three times that of the pneumatic tire at equal tread depth. Additionally, the unique energy transfer within the poly- resin spokes reduces the “bounce” associated with pneumatic tires. No Downtime – MICHELIN X TWEEL SSL performs like a pneumatic tire, but without the risk and costly downtime associated with penetrations and impact damage. Zero degree belts and ComposiCoil™ proprietary design Deep open tread on provide great lateral stiffness, All Terrain model, while resisting damage and designed for excellent absorbing impacts. A deep layer cleaning and traction. of undertread means the core can be retreaded again and again. High strength, poly- resin spokes carry the Michelin’s load, while damping proprietary the ride and providing a Comp10 Cable™ unique energy transfer forms a semi-rigid that reduces “bounce.” “shear beam”, and allows the load to hang from the top. Universal, 8 hole, heavy gauge steel hub will easily bolt onto all standard skid steer machines. Static Tread Max Load Section Overall Rolling Loaded Contact Depth Undertread Weight Description MSPN @ 15km/h Width Diameter Circum. Radius Area (in2) (32nds) (32nds) (lbs.) 12N16.5 X TWEEL SSL All Terrain 34735 4,400 lbs. 12.1” 33.1” 94.7” 15.8” 61.4 31 12 226 12N16.5 X TWEEL SSL Hard Surface 31483 4,400 lbs. 12.1” 33.9” 94.7” 16.1” 53.1 50 6 260 12N16.5 X TWEEL SSL Hard Surface Traction 64828 4,400 lbs. 12.1” 33.9” 94.7” 16.1” 53.1 48 8 255 10N16.5 X TWEEL SSL All Terrain 37131 3,700 lbs. 10.1” 30.2” 86.8” 14.1” 55.0 31 10 177 NOTE: Product measurements are subject to change and are listed here for your convenience. Please see your MICHELIN representative for up-to-date data. USA Canada Mexico michelintweel.com Michelin North America, Inc. Michelin North America (Canada), Inc. Industrias Michelin, S.A. de C.V. One Parkway South 2500 Daniel Johnson, Suite 500 Av. 5 de febrero No. 2113-A Greenville, SC 29615 Laval, Quebec H7T 2P6 Fracc. Industrial Benito Juarez 1-888-622-2306 1-888-871-4444 7 6120, Querétaro, Qro. Mexico 011 52 442 296 1600 Copyright © 2016 Michelin North America, Inc. All rights reserved. SSL-DS-ENG-170327.
Recommended publications
  • 1. What Is Uptis and What Advantages Does It Offer?
    Frequently Asked Questions 1. What is Uptis and what advantages does it offer? Uptis (acronym standing for “Unique Puncture-proof Tire System”) is an assembled airless wheel structure. Uptis has been made possible through Michelin’s mastery and expertise with tire mechanics and high-tech materials. It also represents an evolution of Michelin’s expertise in TWEEL technology. Uptis can be thought of as the first in a new generation of airless solutions. This technology for passenger vehicles offers a number of advantages: ▪ Car drivers feel safer and more secure on the road due to the reduced risk of flat tires and other air loss failures that result from punctures or road hazards. ▪ Fleet owners and professional vehicle drivers optimize their business productivity (no downtime from flats, near-zero levels of maintenance). ▪ Raw material use is reduced, which in turn reduces waste. 2. Why do car drivers feel more at ease with Uptis? Uptis is designed to be impervious to traditional tire failures due to air loss. It does not use compressed air. It therefore eliminates the need for regular inflation pressure maintenance. 3. What is the strategy behind Uptis? Uptis represents Michelin’s vision for the future of mobility. Michelin illustrated its vision of sustainable mobility through the Vision concept1, which the Group unveiled at the Movin’On World Summit on Sustainable Mobility in 2017. Uptis shows how Michelin is adhering to its roadmap for research and development, which comprises these four main pillars of innovation: Airless, Connected, 3D-printed and 100% Sustainable (i.e., renewable or bio-sourced materials).
    [Show full text]
  • What You Need to Know About Mounting Radial Tires on Classic Vehicle Rims
    What You Need to Know About Mounting Radial Tires on Classic Vehicle Rims Over the past 100 years, tires, and the wheels that support them, have gone through significant changes as a result of technical innovations in design, technology and materials. No single factor affects the handling and safety of a car’s ride more than the tire and the wheel it is mounted on and how the two work together as a unit. One nagging question that has been the subject of a lot of anecdotal evidence, speculation, and even more widespread rumor is whether rims designed for Bias ply tires can handle the stresses placed on them by Radial ply tires. And the answer is - it depends. It depends on how the rim was originally designed and built as well as whether the rim has few enough cycles on it, and how it has been driven. But most importantly it depends upon the construction of the tire and how it transmits the vehicle's load to where the rubber meets the road. In this paper, we want to educate you on the facts - not the wives tales or just plain bad information - about how Bias and Radial tires differ in working with the rim to provide a safe ride. Why is there a possible rim concern between Radial and Bias Tires? The fitting of radial tires, to wheels and rims originally designed for bias tires, is an application that may result in rim durability issues. Even same-sized bias and radial tires stress a rim differently, despite their nearly identical dimensions.
    [Show full text]
  • MICHELIN® X® TWEEL® TURF™ the Airless Radial Tire™ & Wheel Assembly
    MICHELIN® X® TWEEL® TURF™ The Airless Radial Tire™ & wheel assembly. Designed for use on zero turn radius mowers. ✓ NO MAINTENANCE ✓ NO COMPROMISE ✓ NO DOWNTIME MICHELIN® X® TWEEL® TURF™ No Maintenance – MICHELIN® X® TWEEL® TURF™ is one single unit, replacing the current tire/wheel/valve assembly. Once they are bolted on, there is no air pressure to maintain, and the common problem of unseated beads is completely eliminated. No Compromise – MICHELIN X TWEEL TURF has a consistent hub height which ensures the mower deck produces an even cut, while the full-width poly-resin spokes provide excellent lateral stability for outstanding side hill performance. The unique design of the spokes helps dampen the ride for enhanced operator comfort, even when navigating over curbs and other bumps. High performance compounds and an effi cient contact patch offer a long wear life that is two to three times that of a pneumatic tire at equal tread depth. No Downtime – MICHELIN X TWEEL TURF performs like a pneumatic tire, but without the risk and costly downtime associated with fl at tires and unseated beads. Zero degree belts and proprietary design provide great lateral stiffness, while resisting damage Multi-directional and absorbing impacts. tread pattern is optimized to provide excellent side hill stability and prevent turf High strength, damage. poly-resin spokes carry the load and absorb impacts, while damping the ride and providing a unique energy transfer that Michelin’s reduces “bounce.” proprietary Comp10 Cable™ forms a semi-rigid “shear beam”, Heavy gauge and allows the steel with 4 bolt load to hang hub pattern fi ts from the top.
    [Show full text]
  • MICHELIN® X® TWEEL Warranty Overview
    MICHELIN® TWEEL® Airless radial tire Warranty Guide Contents MICHELIN® Tweel® Tire Warranty Overview ............................................................................. 3–4 Common Warranty Specifi cations ...............................................................................................5 Parts of a Tweel® Airless Radial Tire .............................................................................................5 Examination Tools .......................................................................................................................6 MICHELIN® X® TWEEL® SSL AIRLESS RADIAL TIRES Technical Specifi cations: MICHELIN® X® Tweel® SSL Tires .............................................................6 MICHELIN® X® Tweel® SSL Tire Torque Specs and Retreading .......................................................7 Tweel® SSL Tire Warranty vs. Wear Guide ..............................................................................8–12 MICHELIN® X® TWEEL® TURF AIRLESS RADIAL TIRES Technical Specifi cations: MICHELIN® X® Tweel® Turf Tires ...........................................................13 Tweel® Turf Tire Proper Installation Instructions ..........................................................................13 Tweel® Turf Tire Warranty vs. Wear Guide ........................................................................... 14–17 MICHELIN® X® TWEEL® CASTERS Technical Specifi cations: MICHELIN® X® Tweel® Casters..............................................................17 Tweel® Caster Warranty
    [Show full text]
  • The World's Most Beautiful And... Best Performing Custom Designed Tires
    WelcomeWelcome ToTo TheThe World’sWorld’s MostMost BeautifulBeautiful and...and... BestBest PerformingPerforming CustomCustom DesignedDesigned TiresTires Bill Chapman Founder Diamond Back Classics I know what you are thinking! The tires on Bill’s Corvette are not correct. It’s not a show car-it is for my enjoyment. That’s the beauty of Diamond Back-you can get what’s period correct or you can get what you like. Custom whitewalls are not a problem. I offer many correct styles for the 60’s and 70’s cars or if you want something special, just let us know. My 2009 catalog features 16 product lines from 13” to 22” and anything in between. That’s more product than all the competitor’s combined. I’m also introducing two new top end product lines-the Diamond Back MX and the Diamond Back III. Both are built in North America by Michelin, the world’s most recognized tire manufacturer. If you’re going to spend over $200 per tire why not get the very best? Prices on the rest of my products will have a small increase and some will remain unchanged. Check out my warranty. It is the most solid, easy to understand warranty in the industry. My new extended warranty for $4.75 per tire is a smart move to protect your investment. As the year of the Great Recession begins, my goal remains unchanged-build the best looking, best performing product at a fair price. Thanks for all of your support! Confused and concerned about using radial tires on older rims? Get the facts ..
    [Show full text]
  • Correct Tires for 1953-82 Corvettes
    FULL OF HOT AIR Correct tires for 1953-82 Corvettes he subject of correct tires for your vintage Corvette can sometimes be an overwhelming subject. Finding an original NOS (New Old Stock) tire or, T heaven forbid, a full set of four plus a spare for some early Corvettes can be next to impossible, even with the internet and the vast number of parts ads in many ma- jor magazines. There are still some original tires out there, with these tires usually be- ing found in old tire warehouses or stumbled upon when a large car parts collection is liq- uidated. In either case, the sometimes-long search can be quite frustrating. The fact of the matter is that the types and sizes of tires that were used on Corvettes from 1953 through 1982 are quite varied in BF Goodrich Wide Whitewall construction and size. In addition, the us- the originals. It should be mentioned here age was somewhat varied from year to year that the DOT (Department of Transportation) dependent on the options that could be or- markings that are required to be on all repro- dered on the car. It should be stated here duction tires were not in use when the origi- that most Corvettes driven today do not car- nal tires were manufactured for most early ry the original tires they were delivered with to Corvettes. This is one quick way to discern if the dealership. Tire technology has changed the tire you are about to buy from an individ- dramatically over the last 40+ years and ual or dealer is an original or a new reproduc- most Corvette owners who drive their car on tion.
    [Show full text]
  • Hydroplaning Analysis for Tire Rolling Over Water Film with Various Thicknesses Using the LS-DYNA Fluid-Structure Interactive Scheme
    Copyright © 2009 Tech Science Press CMC, vol.11, no.1, pp.33-58, 2009 Hydroplaning Analysis for Tire Rolling over Water Film with Various Thicknesses Using the LS-DYNA Fluid-Structure Interactive Scheme Syh-Tsang Jenq1;2 and Yuen-Sheng Chiu2 Abstract: Current work studies the transient hydroplaning behavior of 200 kPa inflated pneumatic radial tires with various types of tread patterns. Tires were nu- merically loaded with a quarter car weight of 4 kN, and then accelerated from rest rolling over a water film with a thickness of 5, 10 and 15 mm on top of a flat pavement. Tire structure is composed of outer rubber tread and inner fiber rein- forcing composite layers. The Mooney-Rivlin constitutive law and the classical laminated theory (CLT) were, respectively, used to describe the mechanical be- havior of rubber material and composite reinforcing layers. The tire hydroplaning phenomenon was analyzed by the commercial finite element code - LS-DYNA. The Arbitrary Lagrangian & Eulerian (ALE) formulation was adopted to depict the fluid-structure interaction (FSI) behavior. Three different tire tread patterns, i.e. the smooth (blank) tread pattern and the 9 and 18 mm wide longitudinally-grooved tread patterns, were constructed to perform the current transient hydroplaning anal- ysis. Simulated dynamic normal contact force and hydroplaning velocity of tire with a prescribed smooth tread pattern were obtained. The computed results were in good agreement with the numerical and test results given by Okano, et al. (2001) for tire running over 10 mm thick water fluid film. In addition, dynamic contact force of a smooth tread pattern tire rolling on a dry flat pavement was also found to be close to the result reported by Nakajima, et al.
    [Show full text]
  • Aircraft Tire Data
    Aircraft tire Engineering Data Introduction Michelin manufactures a wide variety of sizes and types of tires to the exacting standards of the aircraft industry. The information included in this Data Book has been put together as an engineering and technical reference to support the users of Michelin tires. The data is, to the best of our knowledge, accurate and complete at the time of publication. To be as useful a reference tool as possible, we have chosen to include data on as many industry tire sizes as possible. Particular sizes may not be currently available from Michelin. It is advised that all critical data be verified with your Michelin representative prior to making final tire selections. The data contained herein should be used in conjunction with the various standards ; T&RA1, ETRTO2, MIL-PRF- 50413, AIR 8505 - A4 or with the airframer specifications or military design drawings. For those instances where a contradiction exists between T&RA and ETRTO, the T&RA standard has been referenced. In some cases, a tire is used for both civil and military applications. In most cases they follow the same standard. Where they do not, data for both tires are listed and identified. The aircraft application information provided in the tables is based on the most current information supplied by airframe manufacturers and/or contained in published documents. It is intended for use as general reference only. Your requirements may vary depending on the actual configuration of your aircraft. Accordingly, inquiries regarding specific models of aircraft should be directed to the applicable airframe manufacturer.
    [Show full text]
  • Analysis of Influencing Factors of Tire Hydroplaning
    International Journal of Engineering Innovation & Research Volume 10, Issue 2, ISSN: 2277 – 5668 Analysis of Influencing Factors of Tire Hydroplaning Chengwei Xu1, Qingzhi Ma2, Jing Wang2, Ruifeng Sun3, Mengyu Xie1 and Congzhen Liu1* 1 School of Transportation and Vehicle Engineering, Shandong University of Technology, Shandong, Zibo, Zhangdian, 255049, China. 2 Technology Center, Shandong Tangjun Ouling Automobile Manufacture Co., Ltd., Shandong, Zibo, Zichuan, 255000, China. 3 Forestry College, Shandong Agricultural University, Shandong, Taian, Taishan, 271018, China. Date of publication (dd/mm/yyyy): 05/04/2021 Abstract – In order to study the influencing factors of tire hydroplaning performance on wet roads, the 205/55 R16 radial tire is used as the research object, and the finite element method is used to simulate the hydroplaning process of the tire. First, the tire finite element model is established, and then the “tire-water-road” finite element model is established using the CEL method to study the influence of water film thickness, vehicle speed, vertical load and tire pressure on tire hydroplaning performance. The results show that the road contact force and road contact area decrease with the increase of water film thickness and speed, and increase with the increase of vertical load and tire pressure. Appropriately reducing the speed and increasing the inflating pressure are helpful to driving safely in rainy weather. Keywords – Tire Hydroplaning, Coupled Euler-Lagrange (CEL), Wet Road, Radial Tire. I. INTRODUCTION The performance of safe driving on wet roads is the basic requirement for tires. Studies have shown that [1- 3], about 20% of road accidents occur in wet weather conditions, and tire hydroplaning is the main cause of accidents.
    [Show full text]
  • Environmental Comparison of Michelin Tweel™ and Pneumatic Tire Using Life Cycle Analysis
    ENVIRONMENTAL COMPARISON OF MICHELIN TWEEL™ AND PNEUMATIC TIRE USING LIFE CYCLE ANALYSIS A Thesis Presented to The Academic Faculty by Austin Cobert In Partial Fulfillment of the Requirements for the Degree Master’s of Science in the School of Mechanical Engineering Georgia Institute of Technology December 2009 Environmental Comparison of Michelin Tweel™ and Pneumatic Tire Using Life Cycle Analysis Approved By: Dr. Bert Bras, Advisor Mechanical Engineering Georgia Institute of Technology Dr. Jonathan Colton Mechanical Engineering Georgia Institute of Technology Dr. John Muzzy Chemical and Biological Engineering Georgia Institute of Technology Date Approved: July 21, 2009 i Table of Contents LIST OF TABLES .................................................................................................................................................. IV LIST OF FIGURES ................................................................................................................................................ VI CHAPTER 1. INTRODUCTION .............................................................................................................................. 1 1.1 BACKGROUND AND MOTIVATION ................................................................................................................... 1 1.2 THE PROBLEM ............................................................................................................................................ 2 1.2.1 Michelin’s Tweel™ ................................................................................................................................
    [Show full text]
  • Experience the Performance Experience the Performance
    WORLD CLASS TECHNOLOGY & QUALITY PRODUCT GUIDE EXPERIENCE THE PERFORMANCE EXPERIENCE THE PERFORMANCE EXPERIENCE THE PERFORMANCE 30 DAY TEST DRIVE . 4 SPORT CHAMPIRO SX2 | EXTREME PERFORMANCE SUMMER . 6 . CHAMPIRO HPY | MAX PERFORMANCE SUMMER . 8 AS CHAMPIRO UHP | ULTRA HIGH PERFORMANCE ALL-SEASON . 10. COMFORT MAXTOUR LX | GRAND TOURING & CUV ALL-SEASON . 12. MAXTOUR ALL SEASON | PASSENGER ALL-SEASON . 14 . SUV / PICKUP ADVENTURO HT | HIGHWAY ALL-SEASON . 16 . 3 ADVENTURO AT | ON / OFF ROAD ALL-TERRAIN . 18 . PRO MAXMILER PRO | COMMERCIAL VAN ALL-SEASON . 20 MAXMILER ST | TRAILER SERVICE . 22 . POSITIONING CHARTS . 24 DESIGNATIONS, LOAD INDEX & SPEED RATING . 25 WARRANTIES & ROADSIDE ASSISTANCE . 26 It’s your call. Test Drive EXPERIENCE THE PERFORMANCE 30 DAY TEST DRIVE UP TO 500 MILES OR 30 DAYS, WHICHEVER COMES FIRST. Buy a set of GT Radial tires and try them on your car or light truck. Experience the performance of GT Radial tires for yourself. If you’re not completely satisfied, just return them to the dealer where you bought them. Your GT Radial dealer will replace the tires or refund the purchase price—it’s your call. SATISFACTION Visit www.GTRadial-US.com/30daytestdrive for more information. GUARANTEED CHAMPIRO HPY CHAMPIRO UHPAS MAXTOUR LX MAXTOUR ALL SEASON ADVENTURO HT ADVENTURO AT3 EXTREME PERFORMANCE SUMMER 15 / 17 / 18 Inch Extreme Grip Dry Wet Handling Speed Rating: W 35 - 50 Series Champiro SX2 is for drivers who need higher levels of grip, traction, response and control in dry and wet conditions . With an extremely aggressive asymmetric tread design for increased cornering UTQG: 200 A A - 260 A A stability and high-grip silica compound that gives consistent performance, it is suitable for track days, spirited driving and normal street use .
    [Show full text]
  • Tire Tread Depth and Wet Traction – a Review
    A Crain Communications Event 1725 Merriman Road * Akron, Ohio 44313-9006 Phone: 330.836.9180 * Fax: 330.836.1005 * www.rubbernews.com ITEC 2014 Paper W-4 All papers owned and copyrighted by Crain Communications, Inc. Reprint only with permission Tire Tread Depth and Wet Traction – A Review W. Blythe William Blythe, Inc. Palo Alto, California Introduction The relationship of tire tread depth to wet traction has been a subject of technical research and discussion since at least the mid 1960s. Now, nearly 50 years on, these discussions continue, and disagreements regarding the importance of improving wet traction also continue. During this time, bias-ply tires have been replaced by radial construction and, in the USA, highway speeds have increased; miles driven have approximately tripled. This Paper reviews research that strongly suggests an increase in minimum tire tread depth requirements would significantly and positively affect highway safety. Historical Data Radial tire wet frictional performance is compared to bias-ply tire performance in Figure 1, taken from [1], a 1967 Paper. Since radial tires comprise almost all passenger car tires in use, any conclusions relating to tire performance based upon bias-ply tires probably no longer are valid. In these braking tests of fully-treaded tires, water depth was controlled at ¼ inch. As an example of increased highway speeds, posted speed limits of 70 mph on “Interstate System and non-interstate system routes” changed in the USA from zero miles so posted in 1994 to 40,897 miles in 2000. [2] 1 Figure 1 – Radial vs Bias Ply Tires Braking Coefficients, ¼ Inch Water Depth, 1967 Figure 2 shows the estimated total miles driven on all USA roads per year from 1971 through 2013.
    [Show full text]