DOCSLIB.ORG

SUN CAT DAYSAILER 2018.Xlsx

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
SUN CAT DAYSAILER 2018.Xlsx 1195 Kapp Dr Clearwater, FL 33765 Phone (727) 443-4408 Fax (727) 443-1088 www.Com-PacYachts.com [email protected] Dear Com-Pac Yacht owners: The following is a list of frequently requested spare parts and model update parts for Com-Pac Yachts. These parts may be ordered from Hutchins Company by calling 727-443-4408, emailing [email protected] or faxing to 727-443-1088. We take MasterCard/Visa, or can ship UPS/COD . All orders will have shipping and handling charges added. We are pleased to handle custom and/or non-stock orders. There will be a 25% non- refundable fee for custom and/or non-stock orders. There will be a $25 returned check fee. Products returned solely due to the ordering errors by the customer may be charged a 10% re-stocking fee and will not be reimbursed for shipping costs. Remember, your boat may have been customized after leaving the factory. Hutchins Company can not be held responsible for any parts not fitting due to customizing. Please allow four to six weeks for delivery. Prices may have changed. Please call our office about any questions you have concerning your order or about any parts you do not see on the list. Thank you, Hutchins Company, Inc. COM-PAC YACHTS 1 SUN CAT DAYSAILER PARTS JULY 2018 Item Number Description Price IN00B0030 BILGE DISCHARGE ASSEMBLY $14.00 EA. IN00B0035 BOWEYE BLOCK $3.00 EA. IN00C0047 CENTERBOARD BLOCK SUN CAT $35.00 EA. IN00G0060 GALLOWS WOOD, ALL CATBOATS $162.00 EA. IN00G0080 GAS LOCKER DROP BOARDS, SUN CAT $147.00 EA. IN00H0090 HORN RING, PC, SC, HC $24.50 EA. IN00M0005 MAST RING SUN CAT $20.00 EA. IN00T0068 TILLER-solid ash-polyurethane finish-all boats with tillers $94.00 EA. MC00G0000 GOOSENECK SLIDE REWORK W/LONG LOOP - GAFF $25.00 EA. MC00R0075 R RUNNING RIGGING SUN CAT $166.00 EA. MC00R0125 R STANDING RIGGING SUN CAT $317.00 EA. MC00S0016 SHROUD QUICK RELEASE LEVER $97.00 EA. MC00S0042 S PC/SC BOOM GOOSENECK - COMPLETE ASSEMBLY $87.00 EA. MC00S0082 S SPAR KIT SC, mast, boom, gaff - no hinge, lights or blocks $1,417.00 EA. MC00S0102 S MAST ONLY - SUN CAT, no hinge, lights, or blocks $727.00 EA. MCAST0000 TILLER COVER $36.00 EA. MR00B0031 BOSWORTH GUZZLER HANDLE $14.55 EA. MR00G0000 GEL COAT 1 PINT IN CAN $21.00 EA. MR00G0010 GEL COAT GALLON IN CAN $98.00 EA. MR00G0020 GEL COAT QUART IN CAN $33.00 EA. MR00G0021 4 OZ GEL IN SQEEZE BOTTLE $14.00 EA. MR00L0100 LADDER CLIP FOR SMALL BOA $10.50 EA. MR00R0116 HEADSTAY SC (NO SHROUD ADJUSTER) $59.40 EA. MR00R0120 SIDE STAY SUN CAT (includes turnbuckle) $121.75 EA. MR00R0305 MAIN (THROAT) HALYARD SC $60.00 EA. MR00R0315 MAINSHEET SUN CAT $33.60 EA. MR00R0515 GAFF (PEAK) HALYARD SC $66.00 EA. MR00S0000 BOOM END - GAFF OR BOOM $22.56 EA. MR00S0002 CHEEK BLOCKS $21.00 EA. MR00S0003 BAIL $8.00 EA. MR00S0035 S GAFF GOOSENECK ASSEMBLY $87.00 EA. MR00S0036 S GAFF GOOSENECK CASTING, PC, SC $21.00 EA. MR00S0038 S BOOM COMPLETE SUNCAT $407.00 EA. MR00S0040 S BOOM GOOSENECK CASTING $27.00 EA. MR00S0041 BOOM GOOSENECK SLIDE ONLY $19.65 EA. MR00Z0020 ZINC, RUDDER, 1 7/8 $6.39 EA. MRJSB0035 BATTEN SET - SUN CAT - need lengths $53.00 EA. MRJSS0145 SHACKLE FOR SAIL SLUG $1.70 EA. MRJSS0146 SAIL SLUG PLASTIC - 7/16 $1.80 EA. RA00A0032 ANCHOR ROLLER W/BALE-SC $132.00 EA. RA00B0077 BRNZ BUSHING - RUDDER SMALL BOAT $3.50 EA. RA00B0152 BATTERY TRAY $12.00 EA. COM-PAC YACHTS 2 SUN CAT DAYSAILER PARTS JULY 2018 RA00B0165 BATTERY SWITCH - SHIP POWER $52.00 EA. RA00B0190 BILGE HOSE 1 1/2 $1.11 FT. RA00B0233 LOOP TOP, BALL BEARING, BLOCK (SM FOR DOWNHAUL) $12.00 EA. RA00B0235 BLOCK SGL SWIVEL SHACKLE,PC,SC,HC HARLYARDS $29.82 EA. RA00B0237 EYE STRAP FOR BLOCK $1.20 EA. RA00B0255 BOOM GALLOW STANCHIONS SC $125.00 EA. RA00B0310 BOW EYE 3/8X 3 $7.00 EA. RA00C0005 CABINET CATCH $5.55 EA. RA00C0010 CABINET HINGE - SEAT HATCHES, PC,SC,HC, 23,23P $4.89 EA. RA00C0031 CLEAT 6 HERROSHOFF S.S. $18.00 EA. RA00C0032 CLEAT - PLASTIC, 4" BLACK $4.86 EA. RA00C0037 CLEAT PXR LARGE (includes wedge) $44.70 EA. RA00C0055 CASTING GUDGEON/SUN CAT (drilled & painted) $49.00 EA. RA00C0075 CASTING RUDDER/SUN CAT (drilled & painted) $299.00 EA. RA00C0083 CAP - TRANSOM SUN CAT - PORT $38.00 EA. RA00C0084 CAP - TRANSOM SUN CAT - STAR. $38.00 EA. RA00C0085 CAP - BOW SUN CAT $65.50 EA. RA00C0090 CAULKING - WHITE URETHANE $13.00 EA. RA00C0096 ANTI RATTLE CATCH, STAINLESS STEEL $25.00 EA. RA00C0105 CAULKING - BLACK URETHANE $13.00 EA. RA00C0135 CLEAT - TUBULAR JAM $4.86 EA. RA00C0147 CHOCK BOW 4.5SS $38.00 EA. RA00D0031 DECK PIPE HINGED - LARGE $89.00 EA. RA00D0090 DRAIN COVER S.S. $4.11 EA. RA00D0110 DRAIN SCUPPER $4.17 EA. RA00E0001 BUS BAR, COMBINATION, 10 $18.84 EA. RA00E0008 CONNECTOR 2-WIRE PLUG & SOCKET - MASTENDR WIRES $6.42 EA. RA00E0050 EYE STAINLESS $3.63 EA. RA00E0051 EYE STAINLESS-LARGE $13.47 EA. RA00E0060 EYEMOUNT $6.50 EA. RA00E0290 IN LINE FUSE HOLDER-WATER PROOF $7.89 EA. RA00F0223 SEAT HATCH SCDS, SDC-NEED COLOR $235.00 EA. RA00F0227 TILLER HORN - ALL SUN CATS-NEED COLOR $210.00 EA. RA00G0080 GRAY PAINT $72.00 GAL RA00H0135 HINGE - COCKPIT SEAT HATCH, SCDS, SDC, 27, 35 $29.25 PR. RA00L0020 LIGHT BI-COLOR, AQUA SIGNAL SERIES 25 $30.24 EA. RA00L0025 LIGHT MASTHEAD (STEAMING), AQUA SIGNAL SERIES 25 $30.24 EA. RA00L0027 LIGHT MAST MOUNT BRACKET, AQUA SIGNAL SERIES 25 $36.39 EA. RA00L0031 LIGHT BRACKET, DECK MOUNT $10.00 EA. RA00L0040 LIGHT STERN, AQUA SIGNAL SERIES 25 $30.24 EA. RA00L0045 LIGHT S-25 A/R ANCHOR, AQUA SIGNAL SERIES 25 $25.77 EA. RA00M0008 CLAMCLEAT RACING ROLLER J $23.00 EA. RA00M0048 MAST SAIL GUIDES $43.79 EA. RA00M0055 MAST PLUG SUNCAT $23.00 EA. COM-PAC YACHTS 3 SUN CAT DAYSAILER PARTS JULY 2018 RA00M0060 MAST HINGE PC, SC, HC, ECLIPSE $150.00 EA. RA00M0065 MAST HINGE ASSEMBLED ON SPAR $125.00 EA. RA00M0131 MOTOR BRACKET LARGE $253.00 EA. RA00M0132 POLY BOARD FOR MOTOR BRAC $45.90 EA. RA00M0250 FIDDLE BLOCK W/CAM 25-05, MAINSHEET, SC,SDC,SCDS,HC $125.00 EA. RA00M0320 TRIPLE BLOCK SWIVEL SHACKLE, ALL CATBOATS $105.00 EA. RA00R0028 RELEASE PIN - 1/4"X 1" $3.48 EA. RA00R0030 RELEASE PIN 1/4 X 2 1/16" $4.41 EA. RA00R0032 RELEASE PIN - 1/4"X 2 1/2 $4.74 EA. RA00R0036 LONG STRAIGHT PIN, SAFETY $20.00 EA. RA00R0038 CURVED SAFETY PIN (MAST H $20.00 EA. RA00R0060 L MOULDING RUBRAIL, BLACK, 20 FT, SUN CAT $4.74 FT. RA00R0068 RUBRAIL-3/4 SS STRIKER PLATE, 12' LENGTHS $3.39 FT. RA00R0100 RUDDER BLADE 19 SUN CAT $164.00 EA. RA00R0135 RUDDER BLADE TENSION HAND $30.00 EA. RA00S0010 SS BOARDING LADDER $299.00 EA. RA00S0110 SAILSTOP $16.00 EA. RA00S0330 STRAINER BILGE $11.55 EA. RA00S0395 SWITCH PANEL-VERT. SIX SW $80.00 EA. RA00T0060 TANG 12 $9.00 EA. RA00T0070 TANG 4 1/2 $4.00 EA. RA00T0080 TANG 6 $6.00 EA. RA00T0090 TANG 8 1/2 $5.50 EA. RA00T0125 PERFORATED STRIP $28.00 EA. RA00T0140 TAPE 2"X 150' PREMASK, 2ML, ALL COLORS $85.00 RL. RA00T0159 GOLD CHROME TAPE - 1/2"X 150' $31.00 RL. RA00T0161 GOLD MYLAR ARROW HEAD $1.10 EA. RA00T0162 GOLD MYLAR LOGO $2.00 EA. RA00T0170 TEAK BUNG $0.10 EA. RA00T0310 TILLER STRAP $12.50 EA. RA00Z0090 SAMPSON LS BRAID 3/16 -BLACK $0.48 FT. RA00Z0095 SAMPSON L.S. 5/16-WHITE $0.84 FT. RA00Z0100 ZENITH 1/8 #4-WHITE $0.27 FT..
Load more

Recommended publications
  • Armed Sloop Welcome Crew Training Manual
    HMAS WELCOME ARMED SLOOP WELCOME CREW TRAINING MANUAL Discovery Center ~ Great Lakes 13268 S. West Bayshore Drive Traverse City, Michigan 49684 231-946-2647 [email protected] (c) Maritime Heritage Alliance 2011 1 1770's WELCOME History of the 1770's British Armed Sloop, WELCOME About mid 1700’s John Askin came over from Ireland to fight for the British in the American Colonies during the French and Indian War (in Europe known as the Seven Years War). When the war ended he had an opportunity to go back to Ireland, but stayed here and set up his own business. He and a partner formed a trading company that eventually went bankrupt and Askin spent over 10 years paying off his debt. He then formed a new company called the Southwest Fur Trading Company; his territory was from Montreal on the east to Minnesota on the west including all of the Northern Great Lakes. He had three boats built: Welcome, Felicity and Archange. Welcome is believed to be the first vessel he had constructed for his fur trade. Felicity and Archange were named after his daughter and wife. The origin of Welcome’s name is not known. He had two wives, a European wife in Detroit and an Indian wife up in the Straits. His wife in Detroit knew about the Indian wife and had accepted this and in turn she also made sure that all the children of his Indian wife received schooling. Felicity married a man by the name of Brush (Brush Street in Detroit is named after him).
    [Show full text]
  • Appropriate Sailing Rigs for Artisanal Fishing Craft in Developing Nations
    SPC/Fisheries 16/Background Paper 1 2 July 1984 ORIGINAL : ENGLISH SOUTH PACIFIC COMMISSION SIXTEENTH REGIONAL TECHNICAL MEETING ON FISHERIES (Noumea, New Caledonia, 13-17 August 1984) APPROPRIATE SAILING RIGS FOR ARTISANAL FISHING CRAFT IN DEVELOPING NATIONS by A.J. Akester Director MacAlister Elliott and Partners, Ltd., U.K. and J.F. Fyson Fishery Industry Officer (Vessels) Food and Agriculture Organization of the United Nations Rome, Italy LIBRARY SOUTH PACIFIC COMMISSION SPC/Fisheries 16/Background Paper 1 Page 1 APPROPRIATE SAILING RIGS FOR ARTISANAL FISHING CRAFT IN DEVELOPING NATIONS A.J. Akester Director MacAlister Elliott and Partners, Ltd., U.K. and J.F. Fyson Fishery Industry Officer (Vessels) Food and Agriculture Organization of the United Nations Rome, Italy SYNOPSIS The plight of many subsistence and artisanal fisheries, caused by fuel costs and mechanisation problems, is described. The authors, through experience of practical sail development projects at beach level in developing nations, outline what can be achieved by the introduction of locally produced sailing rigs and discuss the choice and merits of some rig configurations. CONTENTS 1. INTRODUCTION 2. RISING FUEL COSTS AND THEIR EFFECT ON SMALL MECHANISED FISHING CRAFT IN DEVELOPING COUNTRIES 3. SOME SOLUTIONS TO THE PROBLEM 3.1 Improved engines and propelling devices 3.2 Rationalisation of Power Requirements According to Fishing Method 3.3 The Use of Sail 4. SAILING RIGS FOR SMALL FISHING CRAFT 4.1 Requirements of a Sailing Rig 4.2 Project Experience 5. DESCRIPTIONS OF RIGS USED IN DEVELOPMENT PROJECTS 5.1 Gaff Rig 5.2 Sprit Rig 5.3 Lug Sails 5.3.1 Chinese type, fully battened lug sail 5.3.2 Dipping lug 5.3.3 Standing lug 5.4 Gunter Rig 5.5 Lateen Rig 6.
    [Show full text]
  • Mast Furling Installation Guide
    NORTH SAILS MAST FURLING INSTALLATION GUIDE Congratulations on purchasing your new North Mast Furling Mainsail. This guide is intended to help better understand the key construction elements, usage and installation of your sail. If you have any questions after reading this document and before installing your sail, please contact your North Sails representative. It is best to have two people installing the sail which can be accomplished in less than one hour. Your boat needs facing directly into the wind and ideally the wind speed should be less than 8 knots. Step 1 Unpack your Sail Begin by removing your North Sails Purchasers Pack including your Quality Control and Warranty information. Reserve for future reference. Locate and identify the battens (if any) and reserve for installation later. Step 2 Attach the Mainsail Tack Begin by unrolling your mainsail on the side deck from luff to leech. Lift the mainsail tack area and attach to your tack fitting. Your new Mast Furling mainsail incorporates a North Sails exclusive Rope Tack. This feature is designed to provide a soft and easily furled corner attachment. The sail has less patching the normal corner, but has the Spectra/Dyneema rope splayed and sewn into the sail to proved strength. Please ensure the tack rope is connected to a smooth hook or shackle to ensure durability and that no chafing occurs. NOTE: If your mainsail has a Crab Claw Cutaway and two webbing attachment points – Please read the Stowaway Mast Furling Mainsail installation guide. Step 2 www.northsails.com Step 3 Attach the Mainsail Clew Lift the mainsail clew to the end of the boom and run the outhaul line through the clew block.
    [Show full text]
  • UNIT 3.5 N M a N U a L Thanks for Buying a Harken Jib Reefing and Furling System
    I N S T R U MKIII C Jib Reefing & T Furling Systems I O UNIT 3.5 N M A N U A L Thanks for buying a Harken Jib Reefing and Furling System. It will give you reliable service with minimal maintenance, but does require proper assembly and basic care. This manual is an important part of the total reefing system. Please take the time to read it carefully before assembling or using your furling system. These instructions may look intimidating, but they are very simple and use photos and drawings throughout to make assembly easy. Many sections will not apply to your boat or to your installation. If you have questions which cannot be answered by the manual or your dealer, please feel free to give us a call. We’ll be happy to do anything we can to make your sailing safer and more fun. 2 Unit 3.5 MKIII January 2007 Parts 6-7 Sailmaker Instructions 8 Preparation for Assembly 10 – 12 This section tells how to measure the headstay, prepare the wire and cut foil to length if they have not been supplied ready to assemble. Assembly 13 – 20 Assembly of the unit is explained in this section Commissioning 21 – 23 Commissioning covers how to install the assembled unit on the boat and make it operational. Operation 24 – 28 This section explains system use. It also discusses tensioning the headstay and converting to racing. Troubleshooting & Repair 29 – 30 The Assembly and Operation Trouble Shooting guides explain how to correct problems. Your seven-year limited warranty is explained on page 30.
    [Show full text]
  • JIB REEFING & FURLING Unit 0
    MKIV OCEAN - JIB REEFING & FURLING Unit 0 Installation Manual – Intended for specialized personnel or expert users 5389 03/21 Preassembly Safety Precautions/Parts Description 2 Sizing Check 3 Parts 4 Rigging Parts Check/Tools 5 Dimensions/Sailmaker's Instructions 6 Toggle Deductions/Stay Into Foil Options 7 Top Foil Length 8 Short Top Foil 9 Confirm Foil Length 10 Assembly Foils/Connectors 11–14 Halyard Swivel and Drum Assembly 15 Rod Rigging 16 Turnbuckle/Toggle 17 Final/Feeder 18–19 Commissioning Turnbuckle 20 Lead Line to Cockpit 21 Halyard Wrap/Prevent Halyard Wrap 22 Pendant/Halyard Restrainer/ Halyard Tension 23 Operation Spinnaker Halyards/Headstay and Backstay Tension 24 Raise Sails 25 Furl/Reef 25–26 Secure Sail 26 Maintenance Clean/Inspect 27 Replace Line 27 Storage/Remove Furler 27 Troubleshooting/Warranty 28 Parts Lists 29-30 Contact Harken 32 Please read these instructions carefully before installing, servicing, or operating the equipment. This manual may be modified without notice. See: www.harken.com/en/support/manuals/ for updated versions. PLEASE SAVE THESE INSTRUCTIONS Safety Precautions/Parts Description Introduction This manual gives technical information on installation and service. This information is destined exclusively for specialized personnel or expert users. Installation, disassembling, and reassembling by personnel who are not experts may cause serious damage to property or injury to users and those in the vicinity of the product. If you do not understand an instruction contact Harken. The user must have appropriate training in order to use this product. Harken accepts no responsibility for damage or harm caused by not observing the safety requirements and instructions in this manual.
    [Show full text]
  • Cape Cod Catboat
    Cape Cod Catboat Instructions: Follow these instructions carefully and step by step. The rigging lines of the boat could tangle easily so do not undo the lines until instructed. 1. Unwrap the hull and stand. Place the hull into the stand with the hull facing forward to your right. Keep the starboard side of the boat facing you in order to follow the instructions and to compare with the diagrams. 2. Study brass eye “A” and the cleats on the boat. There are 7 cleats on this model but we will only be using 3-7. They each have a fixed position that corresponds to different rigging lines and sail sheets of the boat. See diagram (1). 3. Unwrap the packing of the mast; find brass eyes G1, G2, G3, G4, & G5 on the mast. The brass eyes must face towards the stern of the boat. Insert the mast into the mast step on the deck. 4. Unpack the sail. You may want to press the sail with an iron to get out any wrinkles. Find the headstay line on the front top portion of the mast. Attach the line to eye A on the bow. See diagram (1). 5. Put the gaff jaw at the end of gaff pole to brass eye M on the mast. Then find a pin at the end of the boom, insert the pin to a brass hole about 1 inch up the mast from the deck. Find a block with hook on the topping lift line. Attach the hook of the line to eye G1, then lead the line down the mast and through an eye at the bottom of the mast, starboard side, then fix the end of the line to cleat 4 on the cockpit bulkhead.
    [Show full text]
  • Rigging a Mooring Oh Let Us Count the Many, Many Ways
    The Price of Staying Put The standard mooring rig—and what it’ll cost you—for a 34-foot sloop in 20 feet of water. 3/4-inch three-strand nylon pendant, 10 feet ($15 and up) Buoy ($80-$300) 3/8-inch proof coil, 25 feet ($138) 5/8-inch swivel Dor-Mor shackle Mushroom Concrete Screw ($10-$35) block 5/8-inch proof coil, 25 feet ($300) 400- to 500-pound mushroom anchor ($390-$500) Prices refl ect the results of a limited PS market scan of gear required for mooring a 34-foot sailboat according to the typical setup outlined below. Rigging a mooring Oh let us count the many, many ways ... here are plenty of variations in the do away with the top chain altogether Tdetails of permanent ground tackle, and replace it with rope (this option has and PS has covered most. The standard been mentioned several times in PS, and rig is as follows: a mushroom anchor set will be mentioned again). Some use two well in the bottom (or a concrete block pendants. And so forth. or a screw-type anchor, which works well As for the length of the chains, opinion in hard bottoms), to which is shackled a varies. Mike Muessel, owner of Oldport length of heavy chain, then a swivel, then Marine in Rhode Island, has over 30 years a length of somewhat lighter chain, a of experience installing and maintain- shackle, and a rope pendant that goes to ing moorings. In the relatively deep and the bow cleat. (There are often anchorage crowded confi nes of Newport Harbor, he requirements for pendant length; for in- follows the town’s requirement, using a stance, twice the height of the freeboard total length of chain 2½ times the depth at the bow, plus the distance from chock of the water at high tide, divided equally to cleat.) A mooring buoy is shackled between the top and bottom chains.
    [Show full text]
  • Sailing Course Materials Overview
    SAILING COURSE MATERIALS OVERVIEW INTRODUCTION The NCSC has an unusual ownership arrangement -- almost unique in the USA. You sail a boat jointly owned by all members of the club. The club thus has an interest in how you sail. We don't want you to crack up our boats. The club is also concerned about your safety. We have a good reputation as competent, safe sailors. We don't want you to spoil that record. Before we started this training course we had many incidents. Some examples: Ran aground in New Jersey. Stuck in the mud. Another grounding; broke the tiller. Two boats collided under the bridge. One demasted. Boats often stalled in foul current, and had to be towed in. Since we started the course the number of incidents has been significantly reduced. SAILING COURSE ARRANGEMENT This is only an elementary course in sailing. There is much to learn. We give you enough so that you can sail safely near New Castle. Sailing instruction is also provided during the sailing season on Saturdays and Sundays without appointment and in the week by appointment. This instruction is done by skippers who have agreed to be available at these times to instruct any unkeyed member who desires instruction. CHECK-OUT PROCEDURE When you "check-out" we give you a key to the sail house, and you are then free to sail at any time. No reservation is needed. But you must know how to sail before you get that key. We start with a written examination, open book, that you take at home.
    [Show full text]
  • Build the USS CONSTITUTION the World’S Oldest Commissioned Naval Vessel Afloat 12 Build the USS CONSTITUTION Contents STAGE PAGE 111 Sails 245
    Build the USS CONSTITUTION The world’s oldest commissioned naval vessel afloat 12 Build the USS CONSTITUTION Contents STAGE PAGE 111 Sails 245 112 Sails and flags 247 113 Sails 249 114 Sails 251 115 Sails 253 116 Sails 255 117 Sails 257 118 Sails 259 119 Sails 261 120 Sails 263 Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.,121 E. Calhoun Street, Woodstock, IL 60098. All rights reserved © 2017 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may vary from those shown. USS CONSTITUTION STAGE: 111 C 79 Sails 75 68 V3. Fore topmast staysail V4. Main topmast staysail 57 V4 V3 111C Following the plan, attach the four yards (57, 68, 75 and 79) to the front of the foremast. 111D Now prepare the three sections of the mainmast, following the plan. The mainmast (81) with fittings and top, the main topmast (106) and the main topgallant mast (112) following the same process as with the foremast. 111A Retrieve the spritsail A D yard (20) and secure it to the 81 bowsprit with the parrel (23). Tie the parrel to the yard, then pass it over the bowsprit and secure the free end to the yard. 20 112 106 B E 64 111B Retrieve the foremast yards (57, 68, 75 and 79) prepared in Stage 110 and paint them with wood stain.
    [Show full text]
  • Tips of the Trade
    Sail Handling and Neil Pryde Custom Fittings he following are some of the special Neil Pryde fittings which every boat owner should be Tfamiliar with. Genoa Sausage Bags Neil Pryde Race and Premier Series sails are supplied with genoa sausage bags as standard. These bags make repacking easier and quicker. The bags have 2 full-length zips on top of the bag which run forward and aft from the clew to the tack. Before you attempt to put the sail in the Figure 11 bag make sure both sliders are at one end of the bag. Then pack the sail inside and slide one zip from one end to the other. Do not take it off the end of the bag. You can then throw the bag around quite freely and it will not come undone. When you wish to hoist, place the bag on the foredeck and run the zipper off at the front. The whole zip will then break open freely and the sail will be in position on the foredeck ready for use. (figure 11) Dousing Sock The dousing sock can be used with either a asymmetric spinnaker or a regular spinnaker. To hoist the sail, attach the halyard to the head ring on the sail and attach the tack downhaul line to the tack ring. It should then be passed through a turning block on the deck near the bow, and then to a cleat or winch somewhere near the cockpit. The tack will initially fly approximately five feet above the deck, so allow this amount of slack in the line.
    [Show full text]
  • 2013 Ratingform with Logo
    2016 Measurement Sheet and Roster Information Name of vessel Sail Number Rig Year Built Designer Builder Hull Color Deck Color Construction Owner's Name Class or Type Address E-mail Telephone ( ) Cell ( ) All measurements in feet and inches, to the nearest inch. Hull Measurements (turn over for explanations) LOA: (excluding bowsprits and/or boomkins) LWL: BEAM: (excluding rubrails) DRAFT: (centerboard up, if applicable) Propeller type: Fixed Folding Feathering None/Installation: In aperture Exposed Number of Blades: Two Three Four Displacement in lbs. (if known): Spar Materials: Rig Measurements (Complete appropriate section only) Schooner: Ketch, Yawl, Sloop, or Cutter: Check below if gaff-headed: Check Type: Main Fore Mizzen Ketch Yawl Sloop Cutter P2 Check if gaff-headed: J LP Main Mizzen Topsail? P PY P2 B BY J P1 LP P3 P PY B1 B BY For All Rigs P2(spin) SPL .see definitions Signature of Owner: Date: To obtain a rating certificate, mail this completed form along with a check in the amount of $25.00 (payable to CRF Group) to the following address: CRF GROUP PO BOX 319 MYSTIC, CT 06355-0319 Tel. 860.460.3990 E-mail: [email protected] Rig Definitions P2 Distance from highest halyard block for headsails to main deck. P2(spin) Spinnaker halyard block to main deck, if higher than P2. J Horizontal distance from forward side of foremost mast to the intersection of the forwardmost stay with the deck, stem, or bowsprit. LP (optional) Perpendicular distance from Clew to Luff of largest headsail SPL Length of Spinnaker Pole, if longer than J.
    [Show full text]
  • Setting, Dousing and Furling Sails the Perception of Risk Is Very Important, Even Essential, to Organization the Sense of Adventure and the Success of Our Program
    Setting, Dousing and Furling Sails The perception of risk is very important, even essential, to Organization the sense of adventure and the success of our program. The When at sea the organization for setting and assurance of safety is essential dousing sails will be determined by the Captain to the survival of our program and the First Mate. With a large and well- and organization. The trained crew, the crew may be able to be broken balancing of these seemingly into two groups, one for the foremast and one conflicting needs is one of the for the mainmast. With small crews, it will most difficult and demanding become necessary for everyone to know and tasks you will have in working work all of the lines anywhere on the ship. In with this program. any event, particularly if watches are being set, it becomes imperative that everyone have a good understanding of all lines and maneuvers the ship may be asked to perform. Safety Sailing the brigantines safely is our primary goal and the Los Angeles Maritime Institute has an enviable safety record. We should stress, however, that these ships are NOT rides at Disneyland. These are large and powerful sailing vessels and you can be injured, or even killed, if proper procedures are not followed in a safe, orderly, and controlled fashion. As a crewmember you have as much responsibility for the safe running of these vessels as any member of the crew, including the ship’s officers. 1. When laying aloft, crewmembers should always climb and descend on the weather side of the shrouds and the bowsprit.
    [Show full text]