Precious COMPOUNDS Metal and CATALYSTS

Total Page:16

File Type:pdf, Size:1020Kb

Precious COMPOUNDS Metal and CATALYSTS Precious COMPOUNDS Metal AND CATALYSTS INCLUDES: • New Introduction to Catalysis and Catalysts by Martyn Twigg • Compounds and Homogeneous Catalysts • Supported Heterogeneous Catalysts • Unsupported Heterogeneous Catalysts • HiSpec™ Fuel Cell Products • FibreCat™ Anchored Homogeneous Catalysts • Smopex™ Precious Metal Scavenger Systems Improve Your Catalytic Processes with Johnson Matthey Products, Know-How & Service When you order Johnson Matthey As a leading manufacturer and supplier precious metal chemicals or catalyst of PGM homogeneous and heteroge- products from Alfa Aesar, you can be neous catalysts, Johnson Matthey offers assured of Johnson Matthey quality toll and custom manufacturing, as and service through all stages of your well as refining and analytical services. project. Alfa Aesar carries a full range Johnson Matthey is developing new of Johnson Matthey catalysts in stock in catalytic materials for applications such smaller catalog pack sizes and semi-bulk as pharmaceuticals, fuel cells, sensors, quantities for immediate shipment. automobiles, batteries, photographic And our plants worldwide have the materials, specialized plating, and stock and manufacturing capability catalyst manufacture. to meet your needs when it is time to Many precious metal chemical and scale up. All products are lot-traceable catalyst products are produced at to ensure you get the specific material Johnson Matthey plants in the USA you need. (below left) and England (below right). Gram to kilogram quantities are available from stock. For more information or to place an order call 1–800–343–0660 or 1–978–521–6300 or visit our website at www.alfa.com Table of Contents How to Order/General Information 2 Abbreviations and Codes 3 Introduction to Catalysis and Catalysts by Martyn Twigg 5 Precious Metal Compounds & Homogeneous Catalysts 19 Homogeneous catalysis provides an excellent choice where highly specific reactions are desired including chiral transformations. Our homogeneous catalysts can be used in a wide range of chemical transformations. These compounds are available in gram to commercial scale quantities. – Asymmetric Hydrogenation Ligand/Catalyst Kit – Advanced Coupling Kit – Mini Advanced Coupling Kit Supported Heterogeneous Catalysts 53 Supported (heterogeneous) precious metal catalysts are used in a variety of reactions including hydrogenation, oxidation, hydrogenolysis and isomerization. Our line of heterogeneous catalysts are available in a variety of supports such as carbon, alumina, silica, calcium carbonate and barium sulfate. Unsupported Heterogeneous Catalysts 62 The range of Johnson Matthey unsupported catalysts includes platinum oxides, the oxides of the other platinum group metals, and a number of metal “blacks.” Fuel Cell Products 64 The HiSPEC™ range consists of single and bimetal supported and unsupported catalysts, which have been used with success on both the anode and cathode sides of the fuel cell. HiSPEC™ catalysts are all made to a consistently high quality on a commercial scale, and are readily available in gram and kilogram quantities. – HiSPEC™ Fuel Cell Catalysts – HiFUEL™ Catalysts – Fuel Cell Components FibreCat™ Anchored Homogeneous Catalysts 68 These newly designed polymer-anchored materials for homogeneous catalysis help maintain the accessibility of the catalytic sites for diffusion of the starting materials and products. The polyethylene fiber is extremely robust and is not degraded by stirring. Smopex® Scavenger Systems 75 Smopex precious metal scavenger products for the purification of pharmaceutical process streams and other processes. Terms and Conditions of Sale 78 How to Order/General Information Telephone Technical Service Catalog Sales At your request, we will furnish technical (800) 343–0660 or (978) 521–6300 assistance and information with respect Monday-Friday, 8:00 am-7:00 pm EST to our products. Our Technical Service Specialty and Bulk Sales Representatives are trained in specific (888) 343–8025 or (978) 521–6401 product lines to answer your questions Monday-Friday, 8:00 AM-5:00 PM EST regarding applications, specifications, Technical Service product properties and handling. Call (800) 343–7276 or (978) 521–6405 (800) 343–7276. Monday-Friday, 8:00 AM-5:00 PM EST Material Safety Data Sheets Fax Each product is automatically accom- Catalog Sales panied by a Material Safety Data Sheet (800) 322–4757 or (978) 521–6350 (MSDS) in compliance with OSHA. If Specialty and Bulk Sales one is not immediately available, a (978) 521–6366 copy will be sent via mail as soon as possible. If an MSDS is needed prior Mail to shipment of a product please call Alfa Aesar, 26 Parkridge Road (800) 343–0660 or visit www.alfa.com. Ward Hill, MA 01835–8099 Certificates of Analysis Internet All Premion® brand products are www.alfa.com automatically accompanied by a Our web catalog features up-to-date batch-specific Certificate of Analysis. prices, stock availability, MSDS, Certificates of Analysis are also Certificates of Analysis and a available online at www.alfa.com. user-friendly e-commerce system. Return Shipments E–mail Some materials are not returnable. Please [email protected] refer to the Terms and Conditions of Ordering Sale at the end of this catalog. Returned There is no minimum order. All orders shipments cannot be accepted unless accepted...regardless of size. Orders prior arrangements have been made. under $100.00 will be subject to a Requests for return authorization must nominal handling fee. be made within 30 days of your receiving the materials. A 20% restocking fee is Pricing charged on authorized returns of Most current pricing may be found at standard catalog items, subject to a our web site: www.alfa.com. In cases minimum charge of $20.00 per order. where the selling price has changed significantly, we will contact you prior Terms of Sale to filling your order. Our payment Full details of Terms and Conditions terms are net 30 days of invoice. are listed at the end of this catalog. Shipping New Customers Whenever possible, we will ship products We welcome new customers and setting by the method specified on your up an account with Alfa Aesar is easy. order. Two-day delivery is standard Just call (800) 343–0660 and a customer within the contiguous United States service representative will assist you. (overnight in the Northeast). All orders are shipped FOB seller’s shipping point. Alfa Aesar is ISO 9001:2000 Certified Most catalog orders received by 6:00PM EST are shipped the same day. Abbreviations and Codes The following abbreviations are used throughout our listing of products. AAS Atomic absorption spectrometry Mw/Mn Monodispersity value AES Atomic emission spectrometry N Normality of solution ACS Chemicals meeting the specifications outlined Refractive index for the sodium D line at by the American Chemical Society 20 ˚C (or temperature indicated) APS Average particle size nm Nanometer anhy Anhydrous New product Angstrom NMR Nuclear magnetic resonance Approximately OD Outer diameter approx. Approximately optical gr. Suitable for optical applications Atm Atmospheres pc(s) Piece(s) b.p. Boiling point in ˚C at 760mm pressure, unless pH Value taken to represent the acidity or otherwise specified alkalinity of an aqueous solution (c) Contained weight of active material POR Price on request ˚C Celsius ppb Parts per billion cc Cubic centimeter ppm Parts per million cm Centimeter prec. Precipitated cont. Contained Primary Analytical reagent of exceptional purity, cP Centipoise Standard for standardizing volumetric solutions and cS Centistoke preparing reference standards d. Density PTFE Poly(tetrafluoroethylene) dec. Decomposes Purified A grade of higher quality than technical, dia. Diameter often used where there are no official ea. Each standards eV Electron volt P.T. Passes test ˚F Fahrenheit P.V. Pore volume f.p. Flash point Reagent Reagent grade FSSS Fisher sub-sieve sizer REM Rare earth metal F.W. Formula weight (REO) Rare earth oxide base - content of specific g Gram rare earth element in comparison to total g/l Grams per liter (gas density) rare earths present GLC Suitable for use in gas liquid S.A. Surface area chromotography Sp.Gr. Specific gravity GC Gas chromotography Sp.Rot. Specific rotation HPLC High-performance liquid chromotography subl. Sublimes ICP Inductively Coupled Plasma Tc Critical temperature ID Inner diameter TLC Thin-layer chromotography in Inch TSCA Toxic Substance Control Act incl Includes UN Hazardous material transportation IR Infrared identification number J/mol.K Joule(s) per mole Kelvin Wavelength in nanometers kg Kilogram wt Weight KU Kilounit w/w Weight/weight L or l Liter w/v Weight/volume lb Pound XRD X-ray diffraction m Meter Air sensitive M Molarity of solution Moisture sensitive mg Milligram Hygroscopic Micro Light sensitive g Microgram > Greater than meq Milliequivalent Greater than or equal to Merck The Merck Index Less than m Micrometer (micron) Less than or equal to max Maximum [ ] Numbers in brackets after the chemical micron Micrometer description indicate the Chemical Abstract mm Millimeter Service Registry Number m.p. Melting point - mesh # 90% particles pass through screen having mol Mole a given mesh size mmol Millimole + mesh # 90% particles are retained by a screen M.W. Molecular weight having a given mesh size Mw Weighted averaged molecular weight Denotes substance is listed in Toxic Mn Number averaged molecular weight Substance Control Act (TSCA) inventory 3 4 1 IA 18 VIIIA 1.00794 1 4.002602 2 H www.alfa.com He Hydrogen 2 IIA 13 IIIA 14
Recommended publications
  • 540.14Pri.Pdf
    Index Element names, parent hydride names and systematic names derived using any of the nomenclature systems described in this book are, with very few exceptions, not included explicitly in this index. If a name or term is referred to in several places in the book, the most informative references appear in bold type, and some of the less informative places are not cited in the index. Endings and suffixes are represented using a hyphen in the usual fashion, e.g. -01, and are indexed at the place where they would appear ignoring the hyphen. Names of compounds or groups not included in the index may be found in Tables P7 (p. 205), P9 (p. 232) and PIO (p. 234). ~, 3,87 acac, 93 *, 95 -acene, 66 \ +, 7,106 acetals, 160-161 - (minus), 7, 106 acetate, 45 - (en dash), 124-126 acetic acid, 45, 78 - (em dash), 41, 91, 107, 115-116, 188 acetic anhydride, 83 --+, 161,169-170 acetoacetic acid, 73 ct, 139, 159, 162, 164, 167-168 acetone, 78 ~, 159, 164, 167-168 acetonitrile, 79 y, 164 acetyl, III, 160, 163 11, 105, 110, 114-115, 117, 119-128, 185 acetyl chloride, 83, 183 K, 98,104-106,117,120,124-125, 185 acetylene, 78 A, 59, 130 acetylide, 41 11, 89-90,98, 104, 107, 113-116, 125-126, 146-147, acid anhydrides, see anhydrides 154, 185 acid halides, 75,83, 182-183 TC, 119 acid hydrogen, 16 cr, 119 acids ~, 167 amino acids, 25, 162-163 00, 139 carboxylic acids, 19,72-73,75--80, 165 fatty acids, 165 A sulfonic acids, 75 ct, 139,159,162,164,167-168 see also at single compounds A, 33-34 acrylic acid, 73, 78 A Guide to IUPAC Nomenclature of Organic actinide, 231 Compounds, 4, 36, 195 actinoids (vs.
    [Show full text]
  • Synthesis and Reactivity of Cyclopentadienyl Based Organometallic Compounds and Their Electrochemical and Biological Properties
    Synthesis and reactivity of cyclopentadienyl based organometallic compounds and their electrochemical and biological properties Sasmita Mishra Department of Chemistry National Institute of Technology Rourkela Synthesis and reactivity of cyclopentadienyl based organometallic compounds and their electrochemical and biological properties Dissertation submitted to the National Institute of Technology Rourkela In partial fulfillment of the requirements of the degree of Doctor of Philosophy in Chemistry by Sasmita Mishra (Roll Number: 511CY604) Under the supervision of Prof. Saurav Chatterjee February, 2017 Department of Chemistry National Institute of Technology Rourkela Department of Chemistry National Institute of Technology Rourkela Certificate of Examination Roll Number: 511CY604 Name: Sasmita Mishra Title of Dissertation: ''Synthesis and reactivity of cyclopentadienyl based organometallic compounds and their electrochemical and biological properties We the below signed, after checking the dissertation mentioned above and the official record book(s) of the student, hereby state our approval of the dissertation submitted in partial fulfillment of the requirements of the degree of Doctor of Philosophy in Chemistry at National Institute of Technology Rourkela. We are satisfied with the volume, quality, correctness, and originality of the work. --------------------------- Prof. Saurav Chatterjee Principal Supervisor --------------------------- --------------------------- Prof. A. Sahoo. Prof. G. Hota Member (DSC) Member (DSC) ---------------------------
    [Show full text]
  • Synthetic, Kinetic and Electrochemical Studies on New Osmocene-Containing Betadiketonato Rhodium(I) Complexes with Biomedical Applications
    Synthetic, kinetic and electrochemical studies on new osmocene-containing betadiketonato rhodium(I) complexes with biomedical applications. A dissertation submitted in accordance with the requirements for the degree Magister Scientiae In the Department of Chemistry Faculty of Science At the University of the Free State By Zeldene Salomy Ambrose Supervisor Prof. J.C. Swarts June 2006 Acknowledgements To God all the praise, for He has carried me through it all. He gave me strength to carry on, dried my tears when all fell apart and never let me fall to hard. I would like to thank my promoter, Prof. J.C. Swarts for all the guidance and time spent on this project. Also for all the words of wisdom that has stayed in my heart. I would also like to thank the Department Chemistry for laying the basic structure in my pre-graduate studies. To all the lectures and Professors, from Organic to Physical chemistry, thank you for making a difference in my life. To my mother and family, thank you for making me laugh when I wanted to cry. God could not have given me a better family. I wish Dad was here, but I know he is very proud of me. To all my crazy friends, words can not describe how much you mean to me. You guys cried with me, laughed with me and partied with me. You were my Dr. Phil, Oprah and Jerry Springer all in one. Aurelien Auger (bite me), Johan Barnard, Nicola Barnard (ZNN), Nicoline Cloete (sweetie-pie), Micheal Coetzee, Eleanor Fourie (E), Phillip Fullaway (Dr.
    [Show full text]
  • Precious Metal Compounds and Catalysts
    Precious Metal Compounds and Catalysts Ag Pt Silver Platinum Os Ru Osmium Ruthenium Pd Palladium Ir Iridium INCLUDING: • Compounds and Homogeneous Catalysts • Supported & Unsupported Heterogeneous Catalysts • Fuel Cell Grade Products • FibreCat™ Anchored Homogeneous Catalysts • Precious Metal Scavenger Systems www.alfa.com Where Science Meets Service Precious Metal Compounds and Table of Contents Catalysts from Alfa Aesar When you order Johnson Matthey precious metal About Us _____________________________________________________________________________ II chemicals or catalyst products from Alfa Aesar, you Specialty & Bulk Products _____________________________________________________________ III can be assured of Johnson Matthey quality and service How to Order/General Information ____________________________________________________IV through all stages of your project. Alfa Aesar carries a full Abbreviations and Codes _____________________________________________________________ 1 Introduction to Catalysis and Catalysts ________________________________________________ 3 range of Johnson Matthey catalysts in stock in smaller catalog pack sizes and semi-bulk quantities for immediate Precious Metal Compounds and Homogeneous Catalysts ____________________________ 19 shipment. Our worldwide plants have the stock and Asymmetric Hydrogenation Ligand/Catalyst Kit __________________________________________________ 57 Advanced Coupling Kit _________________________________________________________________________ 59 manufacturing capability to
    [Show full text]
  • MOCVD, CVD & ALD Precursors
    The Strem Product Line OUR LINE OF RESEARCH CHEMICALS Custom Synthesis Biocatalysts & Organocatalysts Electronic Grade Chemicals cGMP Facilities Fullerenes High Purity Inorganics & Alkali Metals FDA Inspected Ionic Liquids Ligands & Chiral Ligands Drug Master Files Metal Acetates & Carbonates Metal Alkoxides & beta-Diketonates Complete Documentation Metal Alkyls & Alkylamides Metal Carbonyls & Derivatives Metal Catalysts & Chiral Catalysts Metal Foils, Wires, Powders & Elements Metal Halides, Hydrides & Deuterides Metal Oxides, Nitrates, Chalcogenides Metal Scavengers Metallocenes Nanomaterials Organofluorines Organometallics Organophosphines & Arsines Porphines & Phthalocyanines Precious Metal & Rare Earth Chemicals Volatile Precursors for MOCVD, CVD & ALD Strem Chemicals, Inc. Strem Chemicals, Inc. 7 Mulliken Way 15, rue de l’Atome Dexter Industrial Park Zone Industrielle Newburyport, MA 01950-4098 F-67800 BISCHHEIM (France) U.S.A. Tel.: +33 (0) 3 88 62 52 60 Fax: +33 (0) 3 88 62 26 81 Office Tel: (978) 499-1600 Email: [email protected] Office Fax: (978) 465-3104 Toll-free (U.S. & Canada) Strem Chemicals, Inc. Tel: (800) 647-8736 Postfach 1215 Fax: (800) 517-8736 D-77672 KEHL, Germany Tel.: +49 (0) 7851 75879 Email: [email protected] Fax: +33 (0) 3 88 62 26 81 www.strem.com Email: [email protected] Strem Chemicals UK, Ltd. An Independent Distributor of Strem Chemicals Products Newton Hall, Town Street Newton, Cambridge, CB22 7ZE, UK Tel.: +44 (0)1223 873 028 Fax: +44 (0)1223 870 207 Email: [email protected] MOCVD © 2018 Strem Chemicals, Inc. MOCVD, CVD & ALD Precursors Strem Chemicals, Inc. manufactures and markets specialty chemicals of high purity. Our products are used for research and development, as well as commercial scale applications, especially in the pharmaceutical, microelectronic and chemical/petrochemical industries.
    [Show full text]
  • Nomenclature of Inorganic Chemistry (IUPAC Recommendations 2005)
    NOMENCLATURE OF INORGANIC CHEMISTRY IUPAC Recommendations 2005 IUPAC Periodic Table of the Elements 118 1 2 21314151617 H He 3 4 5 6 7 8 9 10 Li Be B C N O F Ne 11 12 13 14 15 16 17 18 3456 78910 11 12 Na Mg Al Si P S Cl Ar 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 K Ca Sc Ti V Cr Mn Fe Co Ni Cu Zn Ga Ge As Se Br Kr 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 Rb Sr Y Zr Nb Mo Tc Ru Rh Pd Ag Cd In Sn Sb Te I Xe 55 56 * 57− 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 Cs Ba lanthanoids Hf Ta W Re Os Ir Pt Au Hg Tl Pb Bi Po At Rn 87 88 ‡ 89− 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 Fr Ra actinoids Rf Db Sg Bh Hs Mt Ds Rg Uub Uut Uuq Uup Uuh Uus Uuo * 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 La Ce Pr Nd Pm Sm Eu Gd Tb Dy Ho Er Tm Yb Lu ‡ 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 Ac Th Pa U Np Pu Am Cm Bk Cf Es Fm Md No Lr International Union of Pure and Applied Chemistry Nomenclature of Inorganic Chemistry IUPAC RECOMMENDATIONS 2005 Issued by the Division of Chemical Nomenclature and Structure Representation in collaboration with the Division of Inorganic Chemistry Prepared for publication by Neil G.
    [Show full text]
  • SOME STUDIES on CYCLOPENTADIFNYL and CARBONYL COMPLEXES of TRANSITION METALS. a Thesis Submitted by JON ARMISTICE Mccleverty, B
    SOME STUDIES ON CYCLOPENTADIFNYL AND CARBONYL COMPLEXES OF TRANSITION METALS. A Thesis submitted by JON ARMISTICE McCLEVERTY, B.Sc. for the Degree of Doctor of Philosophy of the University of London. Royal College of Science. May 1963. This Thesis I dedicate to DIANNE. Her love and understanding is a continual inspiration. kit CHAPTER II ic-CYCLOPENTADIENYL METAL HYDRIDES THE DI-n-CYCLOPENTADIENYL HYDRIDES OF TANTALUM MOLYBDENUM. AND TUNGSTEN. The hydride complexes are prepared in high yields by the inter- action of the anhydrous metal chlorides (Noel" 1C16, or TaC15) with a solution of sodium cyclopentadienide in tetrahydrofuran containing an excess of sodium borohydride. Without addition of borohydride to the sodium cyclopentadienide solution only low yields of the hydrides can be obtained since the hydriue ion required must come from the solvent or from traces of excess of cyclopentadiene or cyclopentene present in the reaction mixture. The tantalum hydride, (n-C5H5)2TaH3, is a white crystalline compound which is sensitive to air; the molybdenum and tungsten hydrides, (n-05H5)2MH2, form yellow crystals, the former being more sensitive to air than the latter, which can be handled briefly in air. The tantalum compound is sparingly soluble in light petroleum but it is moderately soluble in benzene; the other hydrides are soluble in light petroleum as well as in other common solvents. Solutions of all three compounds decompose rapidly wren exposed to air. The compounds are soluble in halogenated solvents and in carbon disulphide but react with them quite rapidly, the order of reactivity being Ta Mo ACKNOWLEDGMENTS I would like to express my deep gratitude to Professor G.
    [Show full text]
  • Synthesis, Characterization and Electrochemical Studies of Osmocenyl Alcohols with Biomedical Applications
    Synthesis, characterization and electrochemical studies of osmocenyl alcohols with biomedical applications A dissertation submitted in accordance with the requirements for the degree Magister Scientiae in the Department of Chemistry Faculty of Natural and Agricultural Sciences at the University of the Free State by Maheshini Govender Supervisor Prof. J. C. Swarts Co-supervisor Dr. E. Müller January 2015 To my dad, Visvanathan Govender (1 July 1950 – 31 December 2014) If I could write a story It would be the greatest ever told Of a kind and loving father Who had a heart of gold If I could write a million pages But still be unable to say, just how Much I love and miss him Every single day I will remember all he taught me I'm hurt but won't be sad Because he'll send me down the answers And he'll always be MY DAD - Leah Hendrie Acknowledgements I would like to thank my family, friends and colleagues for their support, friendship and guidance throughout this period of my studies. Special thanks must be made to the following people: My supervisor, Prof. J. C. Swarts, for his excellent guidance, leadership and kindness throughout the course of this study. Also, my co-supervisor, Dr. E. Müller, for her excellent guidance, leadership and kindness throughout the course of this study. It has been a privilege to be your student. Thank you for giving me the opportunity to be able to work with a great research group. My immediate family, my mom (Rani Govender) and my brothers (Thavashan and Kavantheran Govender).
    [Show full text]
  • N-Metal Compounds
    31 N-METAL COMPOUNDS n the 85 years following Kekulk's brilliant proposal for the structure of ben- zene, organic chemistry underwent a tremendous expansion, and in the process a wide variety of paradigms or working hypotheses were developed about what kinds of compounds could "exist" and what kinds of reactions could occur. In many cases, acceptance of these hypotheses appeared to stifle many possible lines of investigation and caused contrary evidence to be pigeonholed as "interesting but not conclusive." As one example, the paradigm of angle strain was believed to wholly preclude substances that we know now are either stable or important reaction intermediates, such as cubane (Section 12- 1O), cyclo- propanone (Section 17-1 I), and benzyne (Sections 14-6C and 23-8). No paradigm did more to retard the development of organic chemistry than the notion that, with a "few" exceptions, compounds with bonds between carbon and transition metals (Fe, Co, Ni, Ti, and so on) are inherently un- stable. This idea was swept away in 1951 with the discovery of ferrocene, (C,H,),Fe, by P. L. Pauson. Ferrocene has unheard of properties for an organoiron compound, stable to more than 500" and able to be dissolved in, and recovered from, concentrated sulfuric acid! Pauson's work started an avalanche of research on transition metals in the general area between organic and inorganic chemistry, which has flourished ever since and has led to an improved understanding of important biochemical processes. 31-1 Metallocenes 31-1 METALLOCENES The discovery of ferrocene was one of those fortuitous accidents that was wholly unforeseeable- the kind of discovery which, over and over again, has changed the course of science.
    [Show full text]
  • Reactivity of Transition Metal Organometallics L. J. Farrugia Msc
    L.J. Farrugia : MSc Core2 Course C5 - Reactivity of Transition Metal Organometallics Reactivity of Transition Metal Organometallics L. J. Farrugia MSc Core Course C5 Text books : Inorganic Chemistry - Housecroft & Sharpe Ch 23 - the very basics Inorganic Chemistry - Shriver & Atkins Ch 16 - the very basics This course assumes familiarity with the Level-2 and Level-3 courses on Organometallic Chemistry, and this is covered in the above texts Organometallics - Elschenbroich & Salzer (library) - much more useful Topic 1 - Introduction to Cyclopentadienyl Compounds First part of course covers the role of the ligand cyclopentadienyl (Cp) and its derivatives. Cp is one of the most important ligands in organometallics after CO. A considerable percentage of organometallic compounds contain this ligand - it is also a good ligand for main group metals and the f-block metals (lanthanides & actinides). H H H Fe CO H OC CO Cyclopentadiene Cyclopentadiene complex (4 e donor ligand) very rare as a ligand Na / -H2 H - Na+ H acidic H atom planar aromatic (6-pi electron) dienyl anion - The anion C 5H5 is a very useful synthetic reagent. It is usually treated as equivalent to occupying THREE coordination sites, so that C 5H5 ≡ 3(CO). In electron counting terms, it can be treated as either as a 6-e donor ANION or a 5- e donor NEUTRAL molecule. The latter is the recommended approach because it is simpler (do not need to worry about oxidation levels). 1.1 Bonding in cyclopentadienyl compounds Cp has 5 π electrons in the 5 out-of-plane p-orbitals on the C atoms. These 5 orbitals combine as a 1 + e 1 + e 2 under five-fold symmetry.
    [Show full text]
  • Platinum Group Organometallics COATINGS for ELECTRONICS and RELATED USES by Professor A
    Platinum Group Organometallics COATINGS FOR ELECTRONICS AND RELATED USES By Professor A. Z. Rubezhov Institute of Organo-Element Compounds. U.S.S.K. Academy of Sciences, Moscow Platinum group organometallics have recently been the subject of inten- sive investigation designed to establish the basic characteristics of their derontposition, which results in the formation of metallic or nietal- containing coatings. This review has been compiled from a literature search and indicates some of the applications that are, or could be, of commercial significance. This survey is devoted to some aspects of the regarded as separate techniques. These types of use of organometallic platinum group com- organometallic compounds can decompose to a pounds for the preparation of materials suitable metal, or to an oxide under the influence of for industrial applications, mainly in electronics heat, electric discharge, electron beam, and (1,2). The detailed chemistry of organometallic laser radiation, and these techniques are platinum group compounds is not included, as employed for vapour phase decomposition. a number of monographs on this subject are Decomposition of organometallic compounds available (3, 4, 5). In some instances, however, in solution is frequently performed thermally, information about co-ordination complexes of photochemically, electrochemically or via platinum group metals will be included. The chemical reduction and hydrolysis. Each possible practical use of organometallic method will now be considered separately, and platinum group compounds for the deposition a list of the compounds and metals used in each of coatings and films by various decomposition will be given. techniques was suggested in early works on The requirements for vapour phase thermal synthesis, see for example (6).
    [Show full text]
  • Redox Active Binuclear Complexes of Ruthenium
    REDOX ACTIVE BINUCLEAR COMPLEXES OF RUTHENIUM AND OSMIUM Alan J. Lindsay Ph. D. Thesis University of Edinburgh 1982 DECLARATION Except where specific reference is made to other sources, the work presented in this thesis is the original work of the author. It has not been submitted, in whole or in part, for any other degree. Certain of the results presented have already been published. Alan J. Lindsay. To my Mother, Father and Sister ACKNOWLEDGEMENTS I wish to thank Dr. T.A. Stephenson and Dr. G.A. Heath for their help, encouragement and enthusiasm throughout this work. I also wish to express my gratitude to Dr. D.K. Vattis of the University of PAtras, Greece, for his invaluable contribution to this study. In addition, I am grateful to Dr. D. Reed, Mr. L.H. Bell 13 and Mr. J.A.A. Millar for recording 31 P, C and 1H n.m.r. spectra, Dr. S.F. Watkins of Louisiana State University, U.S.A., for carrying out X-ray work and Mr. N. Grunbaum for performing microanalytical measurements. I am deeply indebted to the S.E.R.C. for their financial support and the University of Edinburgh for the use of facilities. Finally, my thanks to Miss A. Erskine for typing this thesis. ABSTRACT Chapter 1 gives a brief account of some of the general aspects of ruthenium and osmium chemistry. Chapter 2 describes efforts to extend the range of triple chioro bridged binuclear ruthenium (11/11) complexes in an orderly fashion by application of two alternative synthetic strategies: assembly from appropriate monomers such as RuC1 2 L4 (L = py, 4-Mepy, MeCN and Me 2 SO) and by terminal ligand displacement from existing triple chioro bridged complexes e.g.
    [Show full text]