DOCSLIB.ORG

Microcontroller Pocket Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Microcontroller Pocket Guide Microcontroller pocket guide www.infineon.com/microcontrollers Infineon microcontrollers portfolio 32-bit Embedded Power ICs based on Arm® Cortex®-M Arm® Cortex®-M TriCore™ TLE 98 7 9 – 2 Q X A 40 AURIX™ nd AURIX™ 2 generation 1st generation XMC4000 Package XMC1000 Sub-family with Ni-plating Special feature Core frequency Core Embedded Power ICs Temperature range Temperature Embedded Power IC Embedded Power Reinforced leadframe leadframe Reinforced Flash size information information Flash size for respective product respective for Automotive electronic Automotive Embedded Power ICs e XMC1000 trial XMC4000 erformanc Sub-family Special feature Package Temperature Core P st AURIX™ 1 generation 4 Relay driver, Cortex®-M0 -2 SD(∆∑) – ADC X VQFN range Tj frequency H-bridge driver, Cortex®-M0 TQFP 150°C 24 MHz nd 5 T A 20 AURIX™ 2 generation 6 H-bridge driver, Cortex®-M3 W 175°C 40 40 MHz Consumer and indus 7 3-phase driver, Cortex®-M3 Embedded XMC1000 XMC4000 AURIX™ TC2x1) AURIX™ TC3x1) Selection table – Embedded Power ICs for Motor Control Power ICs Arm® Cortex®-M0 Arm® Cortex®-M4F TriCore™ TriCore™ (System-on-Chip) CPU up to 48 MHz CPU up to 144 MHz Up to 3x multicore Up to 6x multicore Arm® Cortex®-M Flash: 8–200 kB Flash: 64 k–2 MB CPU up to 300 MHz CPU up to 300 MHz Criteria TLE984x TLE9845QX TLE9850/1QX(W) TLE985x TLE986x TLE987x CPU up to 40 MHz Package: 16–64 pins Package: 48–196 pins Flash: 0.5–8 MB Flash: 1–16 MB Controller Arm® Cortex®-M0 Arm® Cortex®-M3 Flash: 36–128 kB Package: 80–516 pins Package: 100–516 pins Core frequency 25/40 MHz 40 MHz 24/40 MHz Package: 48 pins Flash size 36–64 KB 48 KB 48/64 KB 48–96 KB 36–128 KB Half-bridge H-bridge B6-bridge Driver stage Relay Computation power PN FET NN FET N FET N FET High-voltage monitor inputs 4 – 5 5 4 1 1) AURIX™ devices add safety and CAN FD Junction temperature levels 150°C 150°C 150°C/175°C 150°C/175°C 150°C/175°C VQFN-48-29 VQFN-48-29 VQFN-48-29 Package VQFN-48-31 VQFN-48-31 VQFN-48-31 VQFN-48-31 Engine cooling fan Window lift Engine cooling fan Window lift Auxiliary water pump Sunroof Oil/water/fuel pump Applications Sunroof HVAC blower Wiper HVAC blower Fuel pump Power lift gate Power tools 2 3 32-bit Embedded Power ICs based on Arm® Cortex®-M Markets Core System Debug Memory Driver circuits Analog Timer MOSFET half bridge driver with double stage charge pump A ∑ ADC Product type/ Product partnumber Automotive Industrial Consumer Package GPIOs type Processor frequency Core [MHz] ERU DMA MPU Watchdog clock Real-time SWD, SPD Trace JTAG, Supply voltage [V] temperature Operating T range [°C] Flash [kByte] ECC RAM [kByte] Cache EEPROM emulationin flash [kByte] bootloader LIN BSL Fast clock Peripherals [MHz] 3 phase 2 phase 1 phase High side switches side switches Low of 10-bit ADC No. channels of 8-bit ADC No. channels Operational amplifier ∆ CCU6 GPT12 Timer 2/21 Timer 3 SPI Dual SPI Quad SPI UART/SCI IIC/I²C IIS/I²S LIN Relay Driver IC TLE9842QX l – – VQFN-48 10 Cortex®-M0 25 – – l l l l – 5.5 to 28 -40 to 150 36 l 2 – 4 l Selectable – – – l l l 12 ch 7 ch – – 3 ch l l – l – – l – – l TLE9842-2QX l – – VQFN-48 10 Cortex®-M0 40 – – l l l l – 5.5 to 28 -40 to 150 40 l 2 – 4 l Selectable – – – l l l l 13 ch 7 ch – – 3 ch l l – l – – l – – l TLE9843QX l – – VQFN-48 10 Cortex®-M0 25 – – l l l l – 5.5 to 28 -40 to 150 48 l 4 – 4 l Selectable – – – l l l 12 ch 7 ch – – 3 ch l l – l – – l – – l TLE9843-2QX l – – VQFN-48 10 Cortex®-M0 40 – – l l l l – 5.5 to 28 -40 to 150 52 l 4 – 4 l Selectable – – – l l l l 13 ch 7 ch – – 3 ch l l – l – – l – – l TLE9844QX l – – VQFN-48 10 Cortex®-M0 25 – – l l l l – 5.5 to 28 -40 to 150 64 l 4 – 4 l Selectable – – – l l l 12 ch 7 ch – – 3 ch l l – l – – l – – l TLE9844-2QX l – – VQFN-48 10 Cortex®-M0 40 – – l l l l – 5.5 to 28 -40 to 150 64 l 4 – 4 l Selectable – – – l l l l 13 ch 7 ch – – 3 ch l l – l – – l – – l Half-Bridge Driver IC TLE9845QX l – – VQFN-48 10 Cortex®-M0 40 – – l l l l – 5.5 to 28 -40 to 150 48 l 4 – 4 l Selectable – – – l l l l 13 ch 7 ch – – 3 ch l l – l – – l – – l TLE9850QX l – – VQFN-48 10 Cortex®-M0 40 – – l l l l – 5.5 to 28 -40 to 150 48 l 4 – 4 – Selectable – – l l – 12 ch 9 ch l – 3 ch l l – l – – l – – l TLE9851QXW l – – VQFN-48 10 Cortex®-M0 40 – – l l l l – 5.5 to 28 -40 to 175 64 l 4 – 4 l Selectable – – l l – 12 ch 9 ch l – 3 ch l l – l – – l – – l H-Bridge Driver IC TLE9852QX l – – VQFN-48 10 Cortex®-M0 40 – – l l l l – 5.5 to 28 -40 to 150 48 l 4 – 4 l Selectable – l – l – 11 ch 9 ch – – 3 ch l l – l – – l – – l TLE9853QX l – – VQFN-48 10 Cortex®-M0 40 – – l l l l – 5.5 to 28 -40 to 150 48 l 4 – 4 l Selectable – l – l – 12 ch 9 ch l – 3 ch l l – l – – l – – l TLE9854QX l – – VQFN-48 10 Cortex®-M0 40 – – l l l l – 5.5 to 28 -40 to 150 64 l 4 – 4 l Selectable – l – l – 12 ch 9 ch l – 3 ch l l – l – – l – – l TLE9854QXW l – – VQFN-48 10 Cortex®-M0 40 – – l l l l – 5.5 to 28 -40 to 150 64 l 4 – 4 l Selectable – l – l – 12 ch 9 ch l – 3 ch l l – l – – l – – l TLE9855QX l – – VQFN-48 10 Cortex®-M0 40 – – l l l l – 5.5 to 28 -40 to 150 96 l 4 – 4 l Selectable – l – l – 12 ch 9 ch l – 3 ch l l – l – – l – – l TLE9861QXA20 l – – VQFN-48 10 Cortex®-M3 24 – 13 ch l l l l – 5.5 to 28 -40 to 150 36 l 3 – 4 l Selectable – l – – – 7 ch 10 ch l – 3 ch l l l l – – l – – – TLE9867QXA20 l – – VQFN-48 10 Cortex®-M3 24 – 13 ch l l l l – 5.5 to 28 -40 to 150 64 l 6 – 4 l Selectable – l – – – 7 ch 10 ch l – 3 ch l l l l – – l – – l TLE9867QXA40 l – – VQFN-48 10 Cortex®-M3 40 – 13 ch l l l l – 5.5 to 28 -40 to 150 64 l 6 – 4 l Selectable – l – – – 7 ch 10 ch l – 3 ch l l l l – – l – – l TLE9867QXW20 l – – VQFN-48 10 Cortex®-M3 24 – 13 ch l l l l – 5.5 to 28 -40 to 175 64 l 6 – 4 l Selectable – l – – 7 ch 10 ch l – 3 ch l l l l – – l – – l TLE9868QXB20 l – – VQFN-48 10 Cortex®-M3 20 – – l l – l – 5.5 to 28 -40 to 150 128 l 4 – 5 l Selectable – l – – – 6 ch 10 ch – l l 3 ch l l l l – – l – – l TLE9869QXA20 l – – VQFN-48 10 Cortex®-M3 24 – 13 ch l l l l – 5.5 to 28 -40 to 150 128 l 6 – 4 l Selectable – l – – – 7 ch 10 ch l – 3 ch l l l l – – l – – l 3-Phase Bridge Driver IC TLE9871QXA20 l – – VQFN-48 10 Cortex®-M3 24 – 13 ch l l l l – 5.5 to 28 -40 to 150 36 l 3 – 4 l Selectable l – – – – 7 ch 9 ch l – 3 ch l l l l – – l – – – TLE9873QXW40 l – – VQFN-48 10 Cortex®-M3 40 – 13 ch l l l l – 5.5 to 28 -40 to 175 48 l 3 – 4 l Selectable l – – – – 7 ch 9 ch l – 3 ch l l l l – – l – – l TLE9877QXA20 l – – VQFN-48 10 Cortex®-M3 24 – 13 ch l l l l – 5.5 to 28 -40 to 150 64 l 6 – 4 l Selectable l – – – – 7 ch 9 ch l – 3 ch l l l l – – l – – l TLE9877QXA40 l – – VQFN-48 10 Cortex®-M3 40 – 13 ch l l l l – 5.5 to 28 -40 to 150 64 l 6 – 4 l Selectable l – – – – 7 ch 9 ch l – 3 ch l l l l – – l – – l TLE9877QXW40 l – – VQFN-48 10 Cortex®-M3 40 – 13 ch l l l l – 5.5 to 28 -40 to 175 64 l 6 – 4 l Selectable l – – – – 7 ch 9 ch l – 3 ch l l l l – – l – – l TLE9879QXA20 l – – VQFN-48 10 Cortex®-M3 24 – 13 ch l l l l – 5.5 to 28 -40 to 150 128 l 6 – 4 l Selectable l – – – – 7 ch 9 ch l – 3 ch l l l l – – l – – l TLE9879QXA40 l – – VQFN-48 10 Cortex®-M3 40 – 13 ch l l l l – 5.5 to 28 -40 to 150 128 l 6 – 4 l Selectable l – – – – 7 ch 9 ch l – 3 ch l l l l – – l – – l TLE9879-2QXA40 l – – VQFN-48 10 Cortex®-M3 40 – 14 ch l l l l – 5.5 to 28 -40 to 150 128 l 6 – 4 l Selectable l – – – – 7 ch 9 ch l l l 3 ch l l l l – – l – – l TLE9879QXW40 l – – VQFN-48 10 Cortex®-M3 40 – 13 ch l l l l – 5.5 to 28 -40 to 175 128 l 6 – 4 l Selectable l – – – – 7 ch 9 ch l – 3 ch l l l l – – l – – l 4 5 32-bit XMC™ Microcontroller – XMC1000 family Brand Device XMC 1 3 0 2 – T 038 X 200 AA Pins Step class range Series Package Architecture Memory size Temperature Arm® Cortex®-M Arm® Cortex®-M0 Arm® Cortex®-M0 Architecture Series Package Pins Temperature Flash size Step 4 architecture 4 series class 40 pins range code AA 01 3 architecture 3 series Q VQFN 38 pins X -40 ..
Load more

Recommended publications
  • Schedule 14A Employee Slides Supertex Sunnyvale
    UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 SCHEDULE 14A Proxy Statement Pursuant to Section 14(a) of the Securities Exchange Act of 1934 Filed by the Registrant Filed by a Party other than the Registrant Check the appropriate box: Preliminary Proxy Statement Confidential, for Use of the Commission Only (as permitted by Rule 14a-6(e)(2)) Definitive Proxy Statement Definitive Additional Materials Soliciting Material Pursuant to §240.14a-12 Supertex, Inc. (Name of Registrant as Specified In Its Charter) Microchip Technology Incorporated (Name of Person(s) Filing Proxy Statement, if other than the Registrant) Payment of Filing Fee (Check the appropriate box): No fee required. Fee computed on table below per Exchange Act Rules 14a-6(i)(1) and 0-11. (1) Title of each class of securities to which transaction applies: (2) Aggregate number of securities to which transaction applies: (3) Per unit price or other underlying value of transaction computed pursuant to Exchange Act Rule 0-11 (set forth the amount on which the filing fee is calculated and state how it was determined): (4) Proposed maximum aggregate value of transaction: (5) Total fee paid: Fee paid previously with preliminary materials. Check box if any part of the fee is offset as provided by Exchange Act Rule 0-11(a)(2) and identify the filing for which the offsetting fee was paid previously. Identify the previous filing by registration statement number, or the Form or Schedule and the date of its filing. (1) Amount Previously Paid: (2) Form, Schedule or Registration Statement No.: (3) Filing Party: (4) Date Filed: Filed by Microchip Technology Incorporated Pursuant to Rule 14a-12 of the Securities Exchange Act of 1934 Subject Company: Supertex, Inc.
    [Show full text]
  • UDE Memtool FLASH/OTP Memory Programming Tool UDE Memtool Is a Tool for Programming On-Chip As Well As External FLASH/OTP and EPROM's
    UDE MemTool FLASH/OTP Memory Programming Tool UDE MemTool is a tool for programming on-chip as well as external FLASH/OTP and EPROM's. It integrates seamlessly with the UDE Universal Debug Engine Integrated Development Environment. UDE MemTool comes as add-in for the Universal Debug Engine (UDE) and allows the FLASH/OTP programming during the development cycle inside of UDE. UDE MemTool is aware of the memory map and runs the programming algorithm when required. UDE MemTool can be used with a separate frontend interface as tool. All programming functions are available via standard COM automation interfaces, too. Using these interfaces, the features of UDE MemTool may be integrated into automatic production and testsystems or started via scripts. Additionally, UDE MemTool offers a batch mode and a command line interface for automation purposes. UDE GangProgrammer can program FLASH memory devices simultaneously to save time and optimize the resource usage in a production environment. Functions of UDE MemTool UDE MemTool offers the following functions (depending on the type of memory): Erasing the entire memory module or selected sectors of the memory module Loading Intel Hex and Motorola S-Record files Programming all or selected portions of the file into the memory module Comparing all or selected portions of the file to the current contents of the memory module Read back and save-to-disk of the current memory content Setting and Resetting the Chip/Sector Protection if applicable (on-chip only) UCB (User Configuration Blocks), ABM (Alternate Boot Mode), BMI (Boot Mode Index) header handling for some derivatives. UDE MemTool can handle more than one memory module, and is using on-chip RAM.
    [Show full text]
  • 16/32-Bit XC2238M, XC2237M
    16/32-Bit Architecture XC2238M, XC2237M 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance XC2000 Family / Base Line Data Sheet V2.1 2011-07 Microcontrollers Edition 2011-07 Published by Infineon Technologies AG 81726 Munich, Germany © 2011 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
    [Show full text]
  • XC2000 Family Starter Kit Board Manual
    XC2000 Family Hardware Manual XC2000 Low End Easy Kit Board V1.5 Hardware Manual V1.5, 2011-03 Microcontrollers Edition 2011-03 Published by Infineon Technologies AG 81726 Munich, Germany © 2011 Infineon Technologies AG All Rights Reserved. LEGAL DISCLAIMER THE INFORMATION GIVEN IN THIS APPLICATION NOTE IS GIVEN AS A HINT FOR THE IMPLEMENTATION OF THE INFINEON TECHNOLOGIES COMPONENT ONLY AND SHALL NOT BE REGARDED AS ANY DESCRIPTION OR WARRANTY OF A CERTAIN FUNCTIONALITY, CONDITION OR QUALITY OF THE INFINEON TECHNOLOGIES COMPONENT. THE RECIPIENT OF THIS APPLICATION NOTE MUST VERIFY ANY FUNCTION DESCRIBED HEREIN IN THE REAL APPLICATION. INFINEON TECHNOLOGIES HEREBY DISCLAIMS ANY AND ALL WARRANTIES AND LIABILITIES OF ANY KIND (INCLUDING WITHOUT LIMITATION WARRANTIES OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD PARTY) WITH RESPECT TO ANY AND ALL INFORMATION GIVEN IN THIS APPLICATION NOTE. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life.
    [Show full text]
  • Getting Started Creating Applications with Μv Ision ®4
    Getting Started Creating Applications with µV ision ®4 For 8-bit, 16-bit, and 32-bit Microcontrollers www.keil.com 2 Preface Information in this document is subject to change without notice and does not represent a commitment on the part of the manufacturer. The software described in this document is furnished under license agreement or nondisclosure agreement and may be used or copied only in accordance with the terms of the agreement. It is against the law to copy the software on any medium except as specifically allowed in the license or nondisclosure agreement. The purchaser may make one copy of the software for backup purposes. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than for the purchaser’s personal use, without written permission. Copyright © 1997-2009 Keil, Tools by ARM, and ARM Ltd. All rights reserved. Keil Software and Design ®, the Keil Software Logo, µVision ®, RealView ®, C51™, C166™, MDK™, RL-ARM™, ULINK ®, Device Database ®, and ARTX™ are trademarks or registered trademarks of Keil, Tools by ARM, and ARM Ltd. Microsoft ® and Windows™ are trademarks or registered trademarks of Microsoft Corporation. PC ® is a registered trademark of International Business Machines Corporation. NOTE This manual assumes that you are familiar with Microsoft Windows and the hardware and instruction set of the ARM7, ARM9, Cortex-Mx, C166, XE166, XC2000, or 8051 microcontroller. Every effort was made to ensure accuracy in this manual and to give appropriate credit to persons, companies, and trademarks referenced herein.
    [Show full text]
  • FINGERPRINT BASED DRIVING LICENSE MANAGEMENT SYSTEM’ Has Been Successfully Completed by the Following Students
    FINGERPRINT BASED DRIVING LICENSE MANAGEMENT SYSTEM SUBMITTED BY DANISH SAYYED MOHAMMED HAMZA SALMAN JAMIL UNDER THE GUIDANCE OF PROF. S.CHAYA DEPARTMENT OF ELECTRONICS AND TELECOMMUNICATION ENGINEERING ANJUMAN-I-ISLAM'S KALSEKAR TECHNICAL CAMPUS PANVEL UNIVERSITY OF MUMBAI Academic Year 2015 –16 i Department of Electronics and Telecommunication Engineering ANJUMAN-I-ISLAM'S KALSEKAR TECHNICAL CAMPUS PANVEL CERTIFICATE This is to certify that the requirements for the project synopsis entitled ‘FINGERPRINT BASED DRIVING LICENSE MANAGEMENT SYSTEM’ has been successfully completed by the following students, Name DANISH SAYYED MOHAMMED HAMZA SALMAN JAMIL in partial fulfillment of Bachelor of Engineering (Electronics and Telecommunication) University of Mumbai, in the Department of Electronics and Telecommunication, Anjuman-I-Islam's Kalsekar Technical Campus Panvel during the academic year 20 – 20. Internal guide ________________ External guide (if any) ________________ Head of Department ______________ Principal _________________ Internal Examiner ________________ External Examiner ________________ ii Project Report Approval for B. E. This project report entitled “Fingerprint Based Driving License Management System” byDanish Sayyed, Mohammed Hamza, Salman Jamil is approved for the degree of Bachelor of Electronics and Telecommunication Engineering. Examiners 1.--------------------------------------------- 2.--------------------------------------------- Supervisors 1.--------------------------------------------- 2.---------------------------------------------
    [Show full text]
  • 2019 Embedded Markets Study Integrating Iot and Advanced Technology Designs, Application Development & Processing Environments March 2019
    2019 Embedded Markets Study Integrating IoT and Advanced Technology Designs, Application Development & Processing Environments March 2019 Presented By: © 2019 AspenCore All Rights Reserved 2 Preliminary Comments • Results: Data from this study is highly projectable at 95% confidence with +/-3.15% confidence interval. Other consistencies with data from previous versions of this study also support a high level of confidence that the data reflects accurately the EETimes and Embedded.com audience’s usage of advance technologies, software and hardware development tools, chips, operating systems, FPGA vendors, and the entire ecosystem of their embedded development work environment and projects with which they are engaged. • Historical: The EETimes/Embedded.com Embedded Markets Study was last conducted in 2017. This report often compares results for 2019 to 2017 and in some cases to 2015 and earlier. This study was first fielded over 20 years ago and has seen vast changes in technology evolution over that period of time. • Consistently High Confidence: Remarkable consistency over the years has monitored both fast and slow moving market changes. A few surprises are shown this year as well, but overall trends are largely confirmed. • New Technologies and IoT: Emerging markets and technologies are also tracked in this study. New data regarding IoT and advanced technologies (IIoT, embedded vision, embedded speech, VR, AR, machine learning, AI and other cognitive capabilities) are all included. 3 Purpose and Methodology • Purpose: To profile the findings of the 2019 Embedded Markets Study comprehensive survey of the embedded systems markets worldwide. Findings include technology used, all aspects of the embedded development process, IoT, emerging technologies, tools used, work environment, applications developed for, methods/ processes, operating systems used, reasons for using chips and technology, and brands and specific chips being considered by embedded developers.
    [Show full text]
  • Data Sheet, V1.3, 2008-11
    Data Sheet, V1.3, 2008-11 XC2765X 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance XC2000 Family Derivatives Microcontrollers Edition 2008-11 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2008. All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non- infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
    [Show full text]
  • Ic3000gt Theactiveemulator Compact Development System
    iC3000GT TheActiveEmulator Compact Development System The iC3000GT ActiveEmulatorTM is a development tool for high performance microcontroller based embedded application development. It supports all famous on-chip emulation technologies like BDM, SDI, Once, JTAG and Nexus for on-chip debugging. For on- chip trace ETM, Nexus and proprietary trace solutions are available. It may also be configured to support comprehensive, real-time high-speed in-circuit emulation up to 100MHz bus speed using iSYSTEM's uniqueActivePODTM technology. The “swap the card" technology preserves the investment in the iC3000GT unit while providing iC3000GT - For High-Speed Upload and Upload While Sampling (see adaptability to a wide range of target MCUs and next page) debug methodologies. iC3000GT ActiveEmulatorFeatures: > On-ChipDebug > On-ChipTrace > In-CircuitEmulation > Real-TimeTrace > Uploadwhilesampling > Hardware&Softwarebreakpoints > Variableclockspeed > Multiplevoltageinterface(1.8V-5V) > Multiprocessorsupport > Flashprogramming > winIDEA - the powerful Integrated PC-Hostinterface:USB2.0,Ethernet Development Environment TCP/IP (100Mbit/s) > Powersupply:8-24VDC/90-240V AC > Idealformobileoperation iC3000GT-thecompactemulator > Compactsize:26*92*120mm The iC3000GT ActiveEmulator is the latest in a > winIDEA IntegratedDevelopment long line of universal development tools from Environment iSYSTEM. Utilizing SMD technology and highly integrated FPGAs, the iC3000GT packs plenty of powerful innovations in a small, compact pack- age. It is the ideal solution for mobile applica- tions and desktop use as well. V3.1 www.isystem.com iC3000GT TheActiveEmulator Compact Development System iC3000GT accepts direct input of DC 24V, or AC Uploadwhilesampling power 90 - 240V with the supplied external auto The ‘Upload while sampling’ feature enables the user to sensing power supply. High speed communication to upload trace data continuously with a maximum speed the host PC is essential for optimum performance.
    [Show full text]
  • Newsletter 2009
    Newsletter 2009 ULINKPro Debug and Trace Unit µVision4 ULINK®Pro is a new debug unit that allows real-time data Enhanced for Productivity and instruction trace streaming via USB. Features ULINK2 ULINKPro ULINKPro Run control debug (ARM & Cortex-Mx) Yes Yes Fast Debug and Trace Unit Run control debug (8051 & C166) Yes - Data Trace (Cortex-M3) Yes Yes Instruction Trace (Cortex-M3) - Yes Keil Cx51 and C166 Performance JTAG Clock speed 10MHz 50MHz Latest Devices and Features Flash Download 28KByte/s 600KByte/s Data Trace streaming 500Kbit/s 100Mbit/s RTOS & Middleware Data Trace: available for Cortex™-M3 based devices using New Features and Improvements Serial Wire Viewer (SWV) or ETM™. MDK-ARM and MPS Cortex MCU Development 9 0 Data Trace Windows provide information from the running target for program 0 data, exceptions, variables, and printf-style outputs Instruction (ETM) Trace: requires a Cortex-M3 device 2 with ETM. It records instruction by instruction program Instruction Trace on Cortex-M3 enables execution. instruction by instruction analysis of application behavior More information: www.keil.com/ULINKPro www.keil.com µVision4 IDE and Debugger The Disassembly Window and Source Windows are fully Debug Restore Views allow you to save multiple window synchronized making program debugging and cursor layouts. You can quickly select the view which best navigation easier. suits your program analysis. Monitor 1 The Configuration Wizard provides an easy way to µVision4 enables you to drag and drop individual windows set up tool and device parameters for your application. The anywhere on the visual surface. This increases your flexibility, dialogs are based on the specific device selected from for instance, you may have multiple memory and variable the µVision4 integrated Device Database.
    [Show full text]
  • Infineon Solutions for Transportation 24V to 60V
    Infineon Solutions for Transportation 24V to 60V www.infineon.com/transportation Contents Introduction 3 Applications 7 Product Families 14 Automotive Power 14 Wireless Control 30 Sensors 34 Microcontrollers 46 Support Tools 54 2 Introduction 24V – 60V Solutions for Transportation Large trucks, campers and recreation vehicles are a common sight on today’s roads and highways. And ever more people have hobbies requiring the transportation of equipment such as boats, snow mobiles, jet skis or other vehicles. There are many other examples of applications driven by 24V systems. In this brochure, you will find the complete portfolio of Infineon products specifically developed for this attractive and growing market. The products featured here encompass a complete range of microcontrollers, power and sen- sor devices. The other large market segment addressed in this brochure is that of smaller methods of transportation, examples of which include eScooters and eBikes. Application Overview Exterior Truck Applications Interior Lights Fog Lights Clearance & Marker Lights Rear & Brake Lights High & Low Beam Front Lights Indicators Interior Truck Applications Dashboard & Interior Lighting Automatic Gearshift Pump Seat Adjustment & Heating ValveElectronic Steering Lock Heating Unit Adjustable Steering Wheel WipersElectronic Door Lock Flaps Side Mirror Control BlowereGas Electrical Gas Pedal Entertainment Electrical Braking System/Braking Assistant HVAC Module Climate Control 3 Introduction Trucks 24V Transport Applications Infineon has seized the No. 1 spot in automotive power semiconductors by creating innova- tive power control solutions. Engineers highly value the reliability and versatility designed into these power products and have used them successfully in many automotive and non- automotive applications. Innovative Technologies, Advanced Techniques Infineon leverages various technologies to create these innovations, such as N- and P-Channel MOSFETs, S-Smart power and logic, and Smart Power Technologies (SPT) featuring monolithic analog and digital power.
    [Show full text]
  • Master's Thesis
    2009:122 CIV MASTER'S THESIS Requirements and possibilities of a new microcontroller in an embedded system David Wiberg Luleå University of Technology MSc Programmes in Engineering Computer Science and Engineering Department of Computer Science and Electrical Engineering Division of EISLAB 2009:122 CIV - ISSN: 1402-1617 - ISRN: LTU-EX--09/122--SE ABSTRACT Shortening product development cycles and reducing cost are important aspects for all development work. Being able to reuse resources spent on earlier product generations is one way to lower costs by preventing the same job from being done multiple times. In this master’s thesis in Computer Science and Engineering an evaluation of a new microcontroller is made with the goal of reusing a large codebase from previous projects. Studied is also the currently used program loading methods at Haldex Traction and a new concept is suggested which would render some of the current limitations invalid. Finally a presentation of the practical work needed to adapt a small real-time kernel called TinyTimber to a new platform is explained. PREFACE This master’s thesis in Computer Science and Engineering is written at Luleå University of Technology with Per Lindgren as examiner. The possibility to write my master’s thesis at Haldex Traction was given to me with help of my good friend Gustaf Lagunoff. For this I send my gratitude since the time spent at Haldex has been rewarding in many ways. I would also like to thank Johan Nilsson and Adam Eliasson at Haldex who have been supervising my work and always found the time to answer questions and provide feedback.
    [Show full text]