Float Switches Class 9036 – Types D and G

For Open Tank Or Sump Applications Class 9036 2 Pole Single Lever Operated

NEMA Type 1 NEMA Type 4 NEMA Type 7, 9 Description Type Price Type Price Type Price Contacts Close on Liquid Rise...... DG2 $35.60 DW31 $236. DR31 $227. Contacts Open on Liquid Rise ...... DG2R 38.80 DW31R 239. DR31R 230. Contacts Close on Liquid Rise...... GG2 68.00 GW1 397. GR1 388. Contacts Open on Liquid Rise ...... GG2R 68.00 GW1R 404. GR1R 397. Order universal mounting bracket and float accessory kits separately from Class 9049 section. Types GW and GR use center hole float. Devices with Form C use Centerhole float . All others use tapped at top float. See Page 18-8 for 9049 accessories.

Modiﬁcations For Type DG, DW, DR Factory Installed Field Installed

Form Price 9049 Kit Price

Reverse Action (Type DG) R $3.30 A58 $3.30 Compensating Spring (Type DG) C 6.50 A19 6.50

Compensating Spring (Type DR, DW) C 6.50 A20 6.50 Type DG2 Comp. Spring and Reverse Action CR 9.80 Not Available

Modiﬁcations For Type GG, GW, GR

Factory Installed Field Installed Form Price 9049 Kit Price

Compensating Spring for Type GG2 C 8.10 9049A13 8.10

Combination of Comp. Spring & Reverse CR 17.70 9049A13 8.10 Action (Type GG2) 1 N.O.-1 N.C. Contact Conﬁguration H 9.60 Not Available Combination of Comp. Spring & 1 N.O.-1 N. C. Contact for Type GG2 CH 17.70 Not Available

Reverse Action (Type GR, GW) R 9.60 Not Available

Maximum Forces At Which Switches Are Tested (in ounces)

Type Force Up Force Down Will Support This Weight To Trip To Trip With Compensating Spring Type GG DG2 9 8 60 DG2 Form R 8 8 60 DW31 8 8 66 DW31 Form R 8 8 66 DR31 8 8 66 DR31 Form R 8 8 66

Class 9049 Float Accessory Speciﬁcations – In Ounces

Item Type A6 Type A6S Type A6C Type A6CS Type A6A Type A6CA

Net Buoyancya (in Water) 7" Float . 60 c 60 c 70 c 70 c 60 c 70 c Weight of 5 foot rod ...... 18.5 16.9 18.5 16.9 6 6

Weight of Extra Ft. of rod (Per Ft.) ...... 3.7 3.4 3.7 3.4 1.2 1.2

Total Weight of Stops ...... 3 (2) 3 (2) 6 (4) 6 (4) 3 (2) 6 (4) cNet Buoyancy of float has been calculated with float 80% submerged, thus allowing 20% factor of safety. aBuoyancy data above is calculated for use in water. Consult factory for buoyancy data media having specific gravity different than water. When ordering Float Accessories, first specify the desired Float Accessory Package such as 9049 A-6, 9049 A-6CS, etc., then as a second item give the number of additional rod Kits required. For Example: To get a 9049 A-6 with 15 feet of rod, order as follows: Item A (1) 9049A6 Item B (4) 9049T1 Refer to page 20-8 for Float Accessories.

Type (with or without Lever Length Force Up Force Down Will Support This Weight With FORM H) POSITION to Trip to Trip Compensating Spring at Max. Adj. in Ozs. GG2 Short 33 39 q GG2 Long 21 27 100 GG2 Form R Short 30 24 q GG2 Form R Long 22 16 150 GR1, GW1 Short 24 31 80 GR1, GW1 Medium 22 29 72 GR1, GW1 Long 20 27 64 qCompensating Spring not effective in combination with SHORT Lever length position.

PRESSURE, VAC, TEMP AND FLOAT SWITCHES

For additional information, reference catalog number 9034CT9701 or D-Fax™ number 1571, 1572, 1573.

Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Sump Pump Float Switches Type FG and LG – Sumptrol® Sump Pump Float Switch – Class 9036

The Class 9036 Type FG-30 pedestal style ﬂoat switch is designed for liquid level control with electric motor operated pumps either directly or through a magnetic starter. It can also be used to activate alarms in liquid level control system s. The upward of downward movement of the lever arm of the Class 9036 Type FG-30 ﬂoat switch controls the ON and OFF positions corresponding to the water levels changes required

to turn the pump or alarm on and off.

Description Type Price

Contacts close on liquid rise FG-30 2 pole NEMA Type 1 $15.00

Accessories Description Number Required Class Type Price Plastic center hole ﬂoat 1 9049 A60 $ 4.00 33.75 inch aluminum rod, 2 ﬂoat stop assemblies and attaching hardw are 1 9049 A61 4.00

Type FG

The Class 9036 Type LG float switch automatically controls submersible sump, effluent and sewage pumps either directly or through a magnetic starter. It can also be used to activate alarms in water or sewage systems. The Type LG is a universal replacement for most small sump, effluent and sewage pump

ﬂoat switches. This ﬂoat switch does NOT contain mercury. The Type LG is omnidirectional and functions properly regardless of orientation.

Electrical Ratings

Voltage Unterminated Rating Plug Rating Recommended Single Phase Maximum Horsepower 1 120Vac, 50/60 Hz 15 Amps 12 Amps /2 HP max. 230Vac, 50/60Hz 15 Amps 12 Amps 1 HP max.

Type LG Electrical Contacts: Snap action, normally open

Differential Angle: 85 degrees +/- 10 degrees Housing Material: Polypropylene 3.01 76 Temperature Range: Ambient Operating: +32˚F to +140˚F (0˚C to +60˚C)

Storage: -40˚F to +185˚F (-40˚C to +85˚C) Dimensions: 3.01 in. (76.4 mm) diameter

4.85 5.10 in. (130 mm) length 123 (APPROX.) Cord: #16 AWG, 2 conductor, SJOW-A, ﬂexible cord, water resistant to 140˚F (60˚C)

Maximum Tether Length: 36 inches

Description Price 0.32 8 9036LG1120B, 115 Vac Plug, 10 feet of cord $37.30 9036LG1120C, 230 Vac Plug, 10 feet of cord 37.30 Cord per foot 1.00

Without plug deduct 6.20

Type Numbering Codes: Class 9036 Type LG X XXX X XXX 1.Basic Type: LG

2.Contact Arrangement: one digit Type LG1 For pump down 3.Cord Length: three digits applications 4.Cord Termination: one letter 5.Packaging: up to three digits

Contacts Closed 1.Basic Type: LG 2.Contact Arrangement :. . . . . 1 — Normally Open (for pump down or high level alarm)

2 — Normally Closed (for pump up or low level alarm) 3 — Normally Open control circuit rated. 3.Cord Length: In inches (up to 20 feet), eg. 12 indicates 12 inches of cord Contacts Open 4.Cord Termination: A = Bare wires B = 115 Vac Piggyback plug C = 230 Vac Piggyback plug PRESSURE, VAC, TEMP AND FLOAT SWITCHES 5.Packaging: C20 for bulk of 20 pieces

20 File E149970CCN REUZ2 File LR78493 Class 321106

For additional information, reference catalog number 9034CT9701 or D-Fax™ number 1571, 1572, 1573.

Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Float Switches

Class 9037 – Types D and E – Closed Tank

Type D switches are completely self-contained units composed of switch mechanism, mounting flange, center hole float, and float rod.

Class 9037 Type D Contacts Close On Liquid Rise

Ground Link Length NEMA Type 1 NEMA Type 4 NEMA Type 7 and 9 “A” Distance Type Price Type Price Type Price 17" DG1 $335. DW1 $537. DR-1 $528.

3.5 23" DG2 353. DW2 555. DR2 543. 88.9 29" DG3 368. DW3 570. DR3 561. 35" DG4 385. DW4 587. DR4 576. 41" DG5 401. DW5 602. DR5 593. B 47" DG6 416. DW6 618. DR6 609. A 53" DG7 434. DW7 635. DR7 624. 59" DG8 449. DW8 651. DR8 642.

Available Factory Modiﬁcations 5.5 139.7 Note: Standard materials are: Float: #304 S.S. Float Guide Rod: #316 S.S. 4356-C1 Ground Post and Cross Tie: Brass Stop Collars : Brass

Omit Float and Rod Accessories ...... Form L1 . . . . deduct . . . . $51.50 Omit Rod Accessories ...... Form L2 . . . . deduct . . . . 10.30 NOTE:The Cut-in point cannot be adjusted to less than 1 Reverse action, Contacts open on liquid rise. . . . . Form R . . . . . add ...... 20.70 3 /2" from the top of the tank. 1 The Cut-out point cannot be less than 5 /2" plus the #316 stainless steel Float and rod distance from the end of the ground link to the accessories ...... Form Z5 bottom of the tank. “A” distance...... 17"...... add ...... 182.00 23"...... add ...... 193.00 29"...... add ...... 204.00 Mounting Dimensions for 35"...... add ...... 213.00 Class 9037 Types D and E 41"...... add ...... 224.00 47"...... add ...... 233.00 53"...... add ...... 245.00 59"...... add ...... 255.00

5.75 Dia. t 146 Table Of Adjustment In Inches 5.125 B.C. 130.18 4.41 “B” 112.02 “A” Approx. Water Level Change 0.125 Bead Type Link Length 3.18 Minimum Maximum 1 DG1 17" 3 /2"8"

1 (4) 0.41 Dia. DG2 23" 3 /2" 14" 10.4 Holes 1 DG3 29" 3 /2" 20"

1 DG4 35" 3 /2" 26"

1 DG5 41" 3 /2" 32" 1 DG6 47" 3 /2" 38"

1 DG7 53" 3 /2" 44"

1 DG8 59" 3 /2" 50" t Type EG The travels listed above also apply to the NEMA Type 7 and 9 (DR) and NEMA Type 4 (DW) Versions. Shown with 9049 ER-3 Rod Kit Type E switches are flange mounted and float movement is transmitted through a stuffing box. and 9049 EF-1 Float Kit installed. Build up the switch to meet your exact requirements from the basic switch, float rod and float groups

below. Switch may be assembled in the ﬁeld to give contacts that open on liquid rise or close on liquid rise.

Class 9049 Floats Class 9037 Type E for Type E Switches Post NEMA Type 1 NEMA Type 4 NEMA Type 7 & 9 Length Application

A #304 S.S...... EF1$19.50 “L” Type Price Type Price Type Price #316 S.S...... EF2 48.40 5 EG8 $132. EW8 $334. ER8 $325. For Minimum 2 /8" Water Level L 11 1.81 Class 9049 EG10 146. EW10 348. ER10 337. Change 4 /16" 45.973.63 “R” “H” Price 92.2 Float Rod Kits 5 EG9 132. EW9 334. ER9 325. For Maximum 2 /8" 3 1 Type ER1 1 /4"8/4"$8.10 Water Level 11 4.5 EG13 146. EW13 348. ER13 337. 4 /16" R 1 1 Change 114.3 Type ER2 2 /2"9/2" 8.10

H F 1 1 Type ER3 3 /2"9/2" 8.10

1 3 Type ER5 5 /4"11/4" 8.10 1 3 Type ER7 7 /4"13/4" 8.10

1 3 Type ER12 12 /4"18/4" 8.10

PRESSURE, VAC, TEMP AND FLOAT SWITCHES

20 For additional information refer to Product Data Bulletin A-84. Consult factory for use in media having speciﬁc gravity different than water.

For additional information, reference catalog number 9034CT9701 or D-Fax™ number 1571, 1572, 1573.

Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Float Switches

Types G, H – Closed Tank – Class 9037

Type G switches are flange mounted and float movement is transmitted through a bellows seal. Build up the switch to meet your exact requirements from the basic switch, float rod and float groups below.

Class 9037 Type G Contacts Open on Rise by Changing Bearing Pin A to B NEMA Type 1 NEMA Type 4 NEMA Type 7 & 9 Basic Float Switch Figure No. (Float Movement) Type Price Type Price Type Price Fig. 1 Above and Below Centerline GG21 $229. GW21 $570. GR21 $561. Fig. 2 Below Centerline GG22 229. GW22 570. GR22 561. Fig. 3 Vertically Mounted Switch GG23 229. GW23 570. GR23 561. Type GG21 with 9049 GBR-5 rod kit and 9049GF-1 ﬂoat kit installed Float Rod Kits for Use With Type G (Figure 1 Float movement) Float Kits Class 9049 Price Brass #316 Stainless Steel For Type G Switches Type RH 9049 Type Price 9049 Type Price

4" Diameter Ball Float, 5 GF1 $21.00 3" 10 /16 GBR3 f $8.10 GSR3 f $21.00 #304 Stainless Steel 5 5" 12 /16 GBR5 8.10 GSR5 21.00 5 4" Diameter Ball Float, 7" 14 /16 GBR7 8.10 GSR7 21.00 GF2 55.00 5 #316 Stainless Steel 9" 16 /16 GBR9 8.10 GSR9 21.00 5 11" 18 /16 GBR11 8.10 GSR11 21.00 5 13" 20 /16 GBR13 8.10 GSR13 21.00 Spl. Length GBR99 32.30 GSR99 89.00 fDo not use on GR or GW when contacts open on rise. Leverage force insufﬁcient.

Available Modiﬁcations For Class 9037 Type G Form Price Letter 1 N.C.-1 N.O. Contacts H $10.30

Substitute Monel bellows for brass bellows (Increases Max. Tank Pressure to 100 PSI. and Max. Temp. to 275˚F) A 66.00

1 Type H switches are attached to the tank by means of a 2 /2 inch screw-in connection. An external pointer indicates the float position within the tank when the unit is mounted. Switches come complete with stainless steel float and rod . Buna N Quad Ring® seal is used between the float rod and sealing connector. Normal application is at atmospheric pressure, but where higher pressures are encountered, the switch

will withstand tank pressures up to 50 p.s.i. at temperatures up to 220˚F. Occasional replacement of the Quad Ring may be necessa ry.

Class 9037 Type H Contacts Close On Liquid Rise Type HG35

Float on Right Float Position Approximate 90˚ Offset Rod Float Rod Viewed from Angle Water Level NEMA Type 1 NEMA Type 4 NEMA Type 7 & 9 Front of Switch Change in Inches Facing Indicator (Field Adjustable) Scale “R” “H” Min. Max. Type Price Type Price Type Price 3 Right 45˚ - 6 /8" 2" 5" HG33 $96. HW33 $298. HR33 $289. 3 Right 90˚ Offset 3" 4 /8" 2" 5" HG35 96. HW35 298. HR35 289. 1 3 Right 90˚ Offset 4 /4"5/8" 2" 7" HG37 96. HW37 298. HR37 289. Bushing 2" 3 1 Right 90˚ Offset 5" 6 /8"2"8/4" HG39 96. HW39 298. HR39 289. Across Flats H 3 1 Right 90˚ Offset 7" 8 /8"2"11/2" HG31 96. HW31 298. HR31 289. 3 CL Left 45˚ - 6 /8" 2" 5" HG34 96. HW34 298. HR34 289. 3 R Left 90˚ Offset 3" 4 /8" 2" 5" HG36 96. HW36 298. HR36 289. 3.86 1 5 Left 90˚ Offset 4 /4"5/8" 2" 7" HG38 96. HW38 298. HR38 289. 98 CL 3 1 Left 90˚ Offset 5" 6 /8"2"8/4" HG30 96. HW30 298. HR30 289. 713 7 1 16.06 184 Left 90˚ Offset 7" 8 /8"2"11/2" HG32 96. HW32 298. HR32 289. 408 11.50 C65075-062 292 For Replacement Float...... See Class 9049 Type H, Page 20-8.

Available Modiﬁcations For Class 9037 Type H 1 Omit 2 /2" Tank Connecting Bushin g Form F3 deduct $5.20 5.98 Omit Float Form L deduct 18.80 2.58 152 2.5 Reverse Action, Contacts open on Rise Form R N.C. 0.38 NPT 63.5 ® 10 VITON packing: 5 oz. Float (Diesel Fuel) For Types HG, HW, HR30, -31, -32, 0.44 11 -37, -38, -39 only Form Z19 N.C.

VITON® packing (suitable for applications up to 250˚F) Form Z20 N.C.

#316 S.S. Float and VITON pac king Form Z21 98.00

3.50 89 3.88 0.44 99 knockout for 0.50/13 conduit dia hole on both sides and front 11

4.00 101 5.00 127 R 1.56 40 1.31 A B 33 B65075-002 3.25 In 5.25 Dual Dim 83 133 mm 6.12 2.31 PRESSURE, VAC, TEMP AND FLOAT SWITCHES 154 59 5.75 B.C. 146 H 6.50 165 20

QUAD RING is a Registered Trademark of Minnesota Rubber Co. VITON is a Registered Trademark of DuPont. For additional information, reference catalog number 9034CT9701 or D-Fax™ number 1571, 1572, 1573.

Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Float Switches Class 9038 – Types A, B, C – Mechanical Alternators

Type A Open Tank – Alternators are designed to provide motor alternation in the operation of two motors. Class 9038 Type A

NEMA Type 1 NEMA Type 4 NEMA Type 7 and 9 Application Description Type Price Type Price Type Price For Open Tank or Mechanical Sump Systems Alte rnator AG1 $124. AW1 $438. AR1 $428. Using Duplex Pumps Float Operated For use with Class 9049 Float Accessories listed on Page 18-8. Type AW AR alternators MUST use center hole ﬂoats.

Table Of Operating Forces - Types AG, AR And AW Without Maximum Weight of Rod Length of Rod Which Can and Stops That Can Be Be Supported with Comp. Spring Supported By Compensating Compensating Spring at Type (No Form C) Spring (Form C) Max. Adjust. Type AG1 Note: AW1 and AR1 have Mechanical Alternator, Float Operated Force Force compensating spring Brass c Stainless Aluminum Upq Down standard. Steel c c 1.06 26.92 4.69 119.13 AG1 (Min. Lever Ext.) 18 oz. 20 oz. 47 oz. 10 ft. 12 ft. 25 ft. 6.88 3.63 174.75 92.2 (4) K.O. s for AG1 (Max. Lever Ext.) 16 17 41 8 10 21 .5 to .75 cond. 12.7 to 19.05 AG1 Form R (Min. Lever Ext.) 14 16 33 7 8 17 1.125 pos1 28.58 AG1 Form R (Max. Lever Ext.) 11 12 30 6 7 15 4.50 pos 2 114.3 AR1, AW1 (Standard Lever) - - 74 16 20 41 pos 3 3.0 AR1, Form R, AW1 Form R (4) .093 dia mtg holes 1.47 - - 85 19 23 47 2.36 76.2 37.34 (Std. Lever) 0.75 5.38 1.25 1.75 3.5 to 4.19 3 19.05 136.5 88.9 to 106.4 31.7 44.45 .84 cRod length has been determined using weight of rod material furnished on Class 9049 accessories ( /8" O.D. tubing). 21.34 Other types of rod should be weighed and compared to “weight of rod–above.” qAdd 2 oz. for Form N5 High W ater alarm.

Types B, C Closed Tank – Flange mounted with bellows seal for control of liquid level within a closed tank. Build up the switch to meet your

requirements from the basic switch, rod kit, and ﬂoat kit groups bel o w .

Type BG NEMA Type 1 NEMA Type 4 NEMA Type 7 & 9 Shown with 9049GBR3 rod kit Class 9038 Basic Switch and 9049BF1 ﬂoat kit installed. Float Rod Lever Figure No. Type Price Type Price Type Price 1 BG21 $483. BW21 $806. BR21 $797.

2 BG22 483. BW22 806. BR22 797.

3 BG23 483. BW23 806. BR23 797.

Class 9049 Rod Kits For Us e With 9038 Type B Length of Rod Brass #316 Stainless Steel (Inches) “R” 9049 Type Price 9049 Type Price

3" GBR3 $8.10 GSR3 $21.00 5" GBR5 8.10 GSR5 21.00 7" GBR7 8.10 GSR7 21.00 2.25 9" GBR9 8.10 GSR9 21.00 1.125 57.2 11" GBR11 8.10 GSR11 21.00 28.58 13" GBR13 8.10 GSR13 21.00 6.84 0.5 0,75 aSpecial Lengths GBR99 32.30 GSR99 89.00 2 knockout holes for & 173.74 12.7 19.05 conduit on each end aRecommended maximum length is 36 inches. 7.22 2.31 7.31 183.4 58.67 185.68 Class 9049 Float Kits For Us e With 9038 Type B 4.0 Description Price . 101.6 .C #304 S.S. Class 9049 Type BF1 $58. 5.75 B #316 S.S. Class 9049 Type BF2 117. 146.05 6.44 Holes equally spaced 163.58 1 4.62 Type C switches are attached to the tank by means of a 2 /2 inch screw-in connection. An 7.66 117.35 6.5 165.1 194.56 4.81 I.D. of Bead external pointer indicates the ﬂoat position within the tank when the unit is mounted. Switches 122.17 5.06 come complete with screw-in connector, stainless steel ﬂoat and rod. O.D. of Bead 128.52 Class 9038 Type C

Float Position Approx. NEMA NEMA NEMA Viewed from Water Level Type 1 Type 4 Type 7, 9 Front of “R” Change R Switch Facing Indicator Scale Min Max Type Price Type Price Type Price

D 1 Right 7" 6 /2" 13" CG31 $264. CW31 $608. CR31 $598.

A 1 Left 7" 6 /2" 13" CG32 264. CW32 608. CR32 598.

F 1 3 Right 4 /4" 4"7/4" CG33 264. CW33 608. CR33 598.

1 3 C Left 4 /4"4"7/4" CG34 264. CW34 608. CR34 598.

3 1 Right 5" 4 /4"9/4" CG35 264. CW35 608. CR35 598. Front 4221-83 B 3 1 2.5 Left 5" 4 /4"9/4" CG36 264. CW36 608. CR36 598. 12.7 Float Travel Adjustments For Class 9038 Type C Type CG Minimum Maximum “R” ABCDFABCDF Float on left 1 1 1 1 1 3 3 3 1 4 /4"2"3/2"2/2"3/2"7"3/2"4/4"3/4"4/4"9/2" 1 3 3 1 1 1 5" 2 /4"4"2/4"4"8"3/4"5/4"3"5/4"10/2" 1

PRESSURE, VAC, TEMP AND FLOAT SWITCHES 7" 2 /2" 5" 2" 5" 10" 5" 7" 4" 7" 14"

Type CG36

20 For Replacement Float, see Type 9049 HF ...... Page 20-8

For additional information, reference catalog number 9034CT9701 or D-Fax™ number 1571, 1572, 1573.

Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Float Switches Types D, J – Closed Tank – Class 9038

Type D Mechanical Alternato rs are designed for applications where mounting is to be made at the top of a closed tank .

Class 9038 Type D Contacts Close On Liquid Rise Type DG Hinge Post NEMA Type 1 NEMA Type 4 NEMA Type 7 Shown with rod kit Water Level Dimension and 9 9049ER5 and ﬂoat kit Change “V” Type Price Type Price Type Price 9049HF3 installed. Min. 5 DG7 $319. DW7 $661. DR7 $652. 2 /8" Max. DG8 319. DW8 661. DR8 652.

Min. DG9 331. DW9 676. DR9 664. 11 4 /16" Max. DG10 331. DW10 676. DR10 664.

Float Kits For Use With Type D Switches Float Rod Kit “R” “H” Price Class 9049 3 1 Size and Material Class and Type Price Type ER1 1 /4"8/4" $8.10 1 Diameter x Length Type ER2 2 /2"9"8.10 31/32 Type DG with 9049 EF-1 Float 5 1 1 1 3 /8" x 4 /2", #304 S.S. Class 9049 Type EF1 $19.50 Type ER3 3 /4"9/2" 8.10 G 5 1 1 3 3 /8" x 4 /2", #316 S.S. Class 9049 Type EF2 48.40 Type ER5 5 /4"11/4" 8.10 V R 1 1 3 D 2 /2" x 7", #304 S.S. Class 9049 Type HF3 21.00 Type ER7 7 /4"13/4" 8.10 1 1 3 2 /2" x 7", #316 S.S. Class 9049 Type HF4 66.00 Type ER12 12 /4"18/4" 8.10 A F Type J Mechanical Alternato rs are flange mounted vertical action. Switches are complete C including float. Float movement is transmitted through a stuffing box. B

Class 9038 Type J Contacts Close On Liquid Rise Ground Link NEMA Type 1 NEMA Type 4 NEMA Type 7 and 9 H Length “A” 4240-B2 Distance Type Price Type Price Type Price

17" JG1 $497. JW1 $820. JR1 $810. 23" JG2 514. JW2 837. JR2 826. 29" JG3 530. JW3 853. JR3 844. 35" JG4 546. JW4 869. JR4 859.

41" JG5 562. JW5 885. JR5 876.

47" JG6 578. JW6 900. JR6 891. 53" JG7 595. JW7 918. JR7 907. 59" JG8 611. JW8 934. JR8 924.

Adjustment In Inches “B” “A” Water Level Change to Effect Type Link Normal Alternation of Two Pumps Length Minimum Maximum 7 1 JG1 17" 4- /16"7-/16" 7 1 JG2 23" 4- /16" 13- /16"

7 1 JG3 29" 4- /16" 19- /16" 7 1 JG4 35" 4- /16" 25- /16" 7 1 JG5 41" 4- /16" 31- /16" 7 1 Type JG6 47" 4- /16" 37- /16" 7 1 JG1 JG7 53" 4- /16" 43- /16"

7 1 JG8 59" 4- /16" 49- /16"

Available Modiﬁcations For All Mechanical Alternators

6.84 4.47 Sub. monel bellows for standard brass bellows 173.7 2.42 113.52.53 seal (Type BG, BR, BW) ...... Form A...... Add . . . . . $66.00 1.47 61.4 64.3 37.34 (2 pls) 1.187 Compensating spring (Type AG) ...... Form C ...... Add . . . . . 25.80 30.15 1 (4) K.O.s for.5 -.75 Omit 2 /2" connecting bushing (Type CG, CR, CW). . Form F3...... deduct . . 5.20 5.56 cond. on each end 141.2 Omit Float (Type CG, CR, CW) ...... Form L...... deduct. . . 18.80 2.44 C 1.5 61.98 Omit Float and rod accessories (Type J) ...... Form L1...... deduct. . . 51.50 L of flange 38.1 Omit Rod accessories (Type JG, JR, JW) ...... Form L2...... deduct. . . 10.30 .97 3.25 Manual transfer selector ...... Form N3 ...... add . . . . . 36.00 24.64 82.55 (Enables operator to select which of two pumps will always “lead” or come on ﬁrst, with the “lag” or second pump operating only under peak demand conditions or if ﬁrst pump fails. When disengaged, unit reverts to normal alternation.)

5.75 Two level non-alternating unit ...... Form N4 ...... add . . . . . 36.00 146.05 5.125 Addition of a third, high water alarm Circuit (Type AG, AR, AW, CG, DG only) Form N5 ...... add . . . . . 86.00 130.18 4.41 112.01 Reverse action (contacts open on Rise)...... Form R . . . . . N.C. .125 bead 3.175 D Sub. #316 S.S. Float and rod accesso ries ...... Form Z5 A C (Type JG, JR, JW) A = 17"...... add . . . . 182.00 B A = 23"...... add . . . . 193.00

4.41 dia. A = 29"...... add . . . . 204.00 112.01 Mtg. Holes A = 35"...... add . . . . 213.00 A = 41"...... add . . . . 224.00 A = 47"...... add . . . . 233.00 A = 53"...... add . . . . 245.00 4240-86 A = 59" . . . . . add . . . . 255.00 ®

VITON packing 5 oz. ﬂoat (Diesel Fuel) (Type CG) Form Z19. . . . N.C. PRESSURE, VAC, TEMP AND FLOAT SWITCHES 5.5 139.7 VITON packing (Type CG, CR, CW )...... Form Z20. . . . N.C. #316 S.S. Float and VITON Packing (Type CG, CR, CW) Form Z21. . . . 98.00 20 Consult factory for use in media h aving speciﬁc gravity different than water.

VITON is a Registered Trademark of DuPont.

For additional information, reference catalog number 9034CT9701 or D-Fax™ number 1571, 1572, 1573.

Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Electrical Ratings

Class 9012, 9013, 9016, 9025, 9035, 9036, 9037, and 9038

Control Duty Circuit Ratings Type G Machine Tool, Temperature & Vacuum (except GVG) AC – 50 or 60 Hz DC AC or DC Contact Contact Resistive Type Arrangement Symbol Inductive 75% Power Inductive 35% Power Factor Factor and Resistive 1 3 Contacts Continuous Volts Volts Make and Break Carrying Make Break Make and Amperes Amperes

Break Single Pole SAME Single Double 1 N.O. – 1 N.C. Amps. VA Amps. VA Amperes Double Throw POLARITY Throw Thro w 120 60 7200 6 720 6 120 0.55 0.22 10 SPDT 240 30 7200 3 720 3 250 0.27 0.11 10 2 4 480 15 7200 1.5 720 1.5 600 0.10 . . . . 10 600 12 7200 1.2 720 1.2 ...... Snap switch contains two (2) double break contact elements (1 N.O. – and 1 N.C.) that must be used on circuits of same polarity. 120 60 7200 6 720 6 125 0.22 0.22 10 240 30 7200 3 720 3 250 0.11 0.11 10 DPDT 480 15 7200 1.5 720 1.5 600 ...... 10

600 12 7200 1.2 720 1.2 ...... Type Contact Contact Arrangement Symbol

POLARITY

SAME Type G Industrial Double Pole Double Throw 2 N.O. – 2 N.C. Contact Arrangementa Contact Symbol SAME POLARITY

1 N.O. – 1 N.C. Snap switch contains two electrically separated sets of contact elements allowing use on circuits of opposite polarity. Each set a600 volt DC rating does not apply. contains two double break contact elements (1 N.O. and 1 N.C.) that Contacts are single pole, double throw — one circuit normally open and one circuit normally must be used on circuits of same polarity. closed. These circuits are not electrically separate and can not be used on opposite polarities.

Temperature Ratings Electrical Ratings - 9016 GVG Types Actuator Minimum Maximum Ambient All -23˚C (-10˚F) +85˚C (+185˚F) Voltage Single Phase Polyphase DC AC AC Diaphragm -40˚C (-40˚F) 110 V 2 HP 3 HP 1 HP Media Piston -26˚C (-15˚F) +120˚C (+250˚F) 220 V 3 HP 5 HP 1 HP 440-550V 5 HP 5 HP 1 All with Forms Q4 and Q14 -26˚C (-15˚F) 32 V /2 HP

CONT ROL CIRCUIT RATING: A600 Temperature Limitations For All 9013 Ft And G Switches

Media Ambient Min. -30˚C (-22˚F) Min. -30˚C (-22˚F) Electrical Ratings: Max. +125˚C (+257˚F) Max. +70˚C (+158˚F) Single Phase ACPolyphase AC q DC Control tFSG and FYG 32°F min. (0°C) Applies to Class and Type Circuit 460/ 460/ 115V230V 575V 115V230V 575V 32V115V230V Maximum Allowable Pressure For All 9013 Switches 9035DG30, DR30, DW30 1 1 1 2 hp3 hp – 3 hp5 hp1 hp /4 hp /2 hp /2 hp A600 Type Pressure (2 pole)

FHG, FSG, FYG, FSW, FYW 220 PSIG 9035DG31, DR31, DW31 1 1 1 hp1 hp–––––/4 hp /4 hp A300 FRG, GHB, GHG, GSB, GSG 300 PSIG (1 NO, 1 NC) GMG, GSR, GSW 100 PSIG 1 1 1 GHR, GHW 250 PSIG 9036DG, DR, DW (2 pole), FG 2 hp3 hp – 3 hp5 hp1 hp /4 hp /2 hp /2 hp A600 1 9036GG, GR, GW (2 pole) 2 hp3 hp5 hp3 hp5 hp5 hp /2 hp1 hp 1 hp A600

1 1 9036G Form H (1 NO, 1 NC) 1 hp2 hp2 hp – – – – /2 hp /2 hp A300 Electrical Ratings For All 9013 Switches 9037DG, DR, DW; EG, ER, 1 1 1 /4 hp /2 hp /2 hp A600 EW ; HG, HR, HW (2 pole) 2 hp3 hp – 3 hp5 hp1 hp Single Polyphase Control Switch Type Voltage DC Circuit 1 Phase AC AC q 9037GG, GR, GW (2 pole) 2 hp3 hp5 hp3 hp5 hp5 hp /2 hp1 hp 1 hp A600 Rating 1 1 9037G Form H (1 NO, 1 NC) 1 hp2 hp2 hp – – – – /2 hp /2 hp A300 1 1 FHG2, 9, 12, 13, 115 1 /2 HP 2 HP /4 HPc 1 1 1 1 44, 49 230 2 HP 3 HP /4 HPc A600 9038 All Devices (2 pole) 2 hp3 hp – 3 hp5 hp1 hp /4 hp /2 hp /2 hp A600 FSG, FSW 460/575 – 1 HP – 1 q FHG22, 29, 32, 115 2 HP 3 HP /2 HPa See 1993 NEC Article 430-84 1 53, 54, 59 230 3 HP 5 HP /2 HPa A600 FYG, FYW 460/575 – 1 HP – 32––– FRG One Pole 1 115 1 HP – /4 HP A300 Temperature Limitations For All Float Switches: All Form H 1 230 1 HP – /4 HP 1 Ambient Min. -30˚C (-22˚F) 32 – – /4 HP 1 FRG Two Pole 115 1 HP 1 HP /4 HP A300 Max. 121˚C (250˚F) 1 230 1 HP 1 HP /4 HP 1 115 1 HP – /2 HP 1 All 9013G Form H 230 2 HP – /2 HP A600 460/575 2 HP – – All 9013G Except 115 2 HP 3 HP 1 HP Form H 230 3 HP 5 HP 1 HP A600 460/575 5 HP 5 HP – cDC Rating does not apply to Form M4. 1 a /4 HP with Form MI. q PRESSURE, VAC, TEMP AND FLOAT SWITCHES See 1993 NEC Article 430-84

For additional information, reference catalog number 9012CT9701, 9013CT9701R8/98 , 9034CT9701 or D-Fax™ number 1567-1573.

Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Electrical Ratings

Class 9012, 9013, 9016, 9025, 9035, 9036, 9037, and 9038

600 12 7200 1.2 720 1.2 ...... Type Contact Contact Arrangement Symbol

POLARITY

SAME Type G Industrial Double Pole Double Throw 2 N.O. – 2 N.C. Contact Arrangementa Contact Symbol SAME POLARITY

CONT ROL CIRCUIT RATING: A600 Temperature Limitations For All 9013 Ft And G Switches

For additional information, reference catalog number 9012CT9701, 9013CT9701R8/98 , 9034CT9701 or D-Fax™ number 1567-1573.

Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com