DOCSLIB.ORG

Online Trowel Fitting Guide the Wagman Online Fitting Guide Will Help You Easily See All of the Trowel Blades and Pans That Fit Your Machine

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Online Trowel Fitting Guide the Wagman Online Fitting Guide Will Help You Easily See All of the Trowel Blades and Pans That Fit Your Machine Online Trowel Fitting Guide The Wagman online fitting guide will help you easily see all of the trowel blades and pans that fit your machine. Choose the make and model of your equipment for a list of what fits your trowel. Visit www.WagmanMetal.com for the interactive fitting guide. 50 Years of Excellence Since 1963 Wagman Metal Products, Inc., has been a leading supplier of power trowel replacement blades and floating pans in the concrete industry. We want to thank our dealers and customers for their continued support, helping to make Wagman Metal Products successful. We are truly a family business that started when my grandfather George F. Wagman, Sr., and my father George F. Wagman, Jr., began production and distribution of a variety of blades to fit many brands of power trowels. Today, Wagman manufactures over 350 different blades to fit the trowels of over 40 companies. In 1980 I started working on our factory floor, performing a variety of jobs in order to learn all the aspects of the manufacturing process. My experience over the years helps ensure that all the products we manufacture meet my tough standards for quality and value. If it's got my name on it, you know you can count on it! Wagman's experience and innovation have helped pioneer the development of heavy-duty blades to cope with the stresses of the new generation of heavy riding trowels. More recently Wagman has perfected the design of the plastic trowel blade, engineered to provide burnish free finishing and unparalleled blade life. Be sure to check out our newest innovation, the Revolution Rotary System. Wagman enters a whole new market segment in floor clean-up and preparation for contractors who wish to use their power trowels for more than just finishing. Remember, Wagman products are available from over 3,000 contractor distributors Worldwide, giving you ready access to the #1 line of power trowel replacement blades in the World! George F. Wagman III 400 SOUTH ALBEMARLE ST. • YORK, PA 17403-2514 President PH: 717.854.2120 • FX: 717.854.4540 ORDERS: 800.233.9461 • www.WagmanMetal.com Revolution Rotary System 02-03 Plastic Trowel Blades 06-07 Trowel Blades 08-17 Trowel Accessories Picture Reference 17-19 Pro Float Pans® 20-23 Application/Placing Tools 24-26 Bull Floats / Long Handle Tools Handles & Adapters 27-29 Hand Floats & Darbies 30 Knee Boards & Broom Trolley 31 Brooms & Squeegees 32-33 Scrapers & Choppers 34 Stripper Blades 35 Chemicals, Sprayers & Accessories 36-39 The Wagman Revolution Rotary System turns your power trowel into a powerful floor scrubbing machine. Power trowel owners can now use equipment they already own to do scrubbing and stripping projects they would have had to subcontract or rent equipment for in the past. The Revolution Rotary System is a patented solution available only from Wagman Metal Products. Revolution Rotary US Patent No. 7815393 System Applications: � Scrub in impregnating sealers Multi-Vortex � Remove residue from stain and dye applications Scrubbing Pattern: � Clean up floors after tilt up construction � Strip sealers � Power scrub old concrete clean � Surface preparation � Scrub forms clean � Many more "Excellent System" The bearing driven Rotary System allows the Revolution System to spin with the trowel's spider arm while revolving the opposite way on their own axis. Dan Hill of Ace/Avant calls the Revolution "an excellent system". This creates a Multi-Vortex passive planetary pattern See video of Dan and others using the Revolution Rotary that is ideal for stripping, scrubbing, polishing and System at www.wagmanmetal.com cleaning while prolonging the life of the system. 2 to order call 717.854.2120 or 800.233.9461 TM How to Order the Revolution Rotary System US Patent No. 7815393 For each trowel arm, choose the Rotary Select the Brush 2 or Pad Driver 3 Add a Diamond Floor Maintenance System Mount 1 for the type trowel or for the application. Pad 4 for desired shine. adapter. 1 Revolution Rotary System Mounts Assembled in the USA NOTE: One Rotary Part #: WRSX-36, Fits 36" WX bolt-on style power trowels, 4 lbs. (excluding Wacker 2005 & newer) System Mount per Part #: WRSA-36, Fits 36" Wacker Neuson 2005 or newer bolt-on style power trowels, 4 lbs. trowel arm Part #: WRSE-36, Fits 36" EDCO style power trowels and adapters, 4 lbs. Part #: WRSF-44, Fits 44" Superior/Boren style power trowels, 4 lbs. Part #: WRSX-46, Fits 46" WX bolt-on style power trowels, 4 lbs. (excluding Wacker 2005 & newer) Part #: WRSA-46, Fits 46" Wacker Neuson 2005 or newer bolt-on style power trowels, 4 lbs. Shown: WRSX-36 Part #: WRSE-46, Fits 46" EDCO style power trowels and adapters, 4 lbs. 2 Revolution Brushes NOTE: All brushes are 14" dia and fit both 36" and 46/48" rotary system mounts One brush per trowel arm ☛ When in doubt of scratching, use softer bristle *Hydrochloric acid/muriatic acid may soften grit and nylon brushes WARNING: Do not use Wagman Rotary System with flammable materials. Brushes/Part # Bristle Type Pad Replacement Details .070" nylon Comparable to a high • The most aggressive Ultra-Grit* impregnated productivity strip pad WRS-14-UG stripping brush w/46 grit • Ideal for heavily soiled 5.6 lbs. silicon carbide concrete surfaces .050” nylon Comparable to a • An aggressive grit brush Nitro-Grit* impregnated w/ black or brown pad • Used for stripping finishes WRS-14-NG 80 grit from hard surfaces 5.6 lbs. silicon carbide Virta-Grit* .035” nylon Comparable to a blue • Frequent cleaning of hard impregnated w/ or green pad surfaces WRS-14-VA 180 grit • Flexible for cleaning narrow 5.5 lbs. silicon carbide joints and uneven surfaces Hydro-Scrub* .018” nylon Comparable to a • Durable scrubbing brush • Minimal aggression on WRS-14-HS impregnated w/ red pad 500 grit hard surfaces 5.9 lbs. silicon carbide • Most often used on Wire unfinished concrete floor WRS-14-WR .014" steel wire • Variety of uses and 6.6 lbs. economical • Steel wire will rust • Wide variety of general Nylon* Extra stiff .028” scrubbing on smooth WRS-14-NY bristles surfaces 5.5 lbs. • Resistant to many chemicals • General scrubbing purposes Bassine • Water absorption properties WRS-14-BA Natural fiber make this an excellent, 4.4 lbs. economical natural fiber choice on hard surfaces • Naturally acid resistant Tampico Natural • Soft bristle WRS-14-TA Tampico fiber 5.6 lbs. 3 Revolution Pad Driver Centering Device (Optional) 4 Diamond Floor Maintenance Pad • Heavy polypropylene strands • Attaches to Pad Driver to trimmed irregular at 3/4 " lock pads in place Part #: WRS-140400, 14" 400 Grit Part #: WRS-140800, 14" 800 Grit • Tufts penetrate into the pad • Keeps pads centered for Part #: WRS-141500, 14" 1500 Grit for secure holding power optimal scrubbing action Part #: WRS-143000, 14" 3000 Grit 1 lb each Part #: WRS-14PD, 4.4 lbs. Part #: WRS-PH, 1 lb www.WagmanMetal.com 3 Different Types of Power Trowel Blades Float Blade Float blades latch onto finish blades Blade is run flat on concrete with angled edges to prevent digging Mortar is worked to the surface Wagman float blades are designed to clip onto a finish Rocks are knocked blade, combination blade, bar or a trowel arm. With the down blade set in the flat position, high spots are broken down while suction and engine vibration bring mortar to the NOTE: Wagman float surface, all producing a uniform and level slab. pans perform the same function as float blades Finish Blade Blade is pitched on the concrete Wagman finish blades are designed to produce a smooth or Concrete is polished finish on concrete surfaces. After a slab has set up, smoothed trowel pitch is increased to a greater blade angle resulting in a smooth or polished finish. Combination Blade Blade can be run flat for floating or pitched to finish concrete Angled sides and Wagman combination blades are made from a heavier gauge leading edge tool steel and are designed for those who wish to use one prevent digging blade for both float and finish operations. Set in the flat position, the blade is used for floating, while a slight pitch produces a smooth or a polished finish. 4 to order call 717.854.2120 or 800.233.9461 Key Features & Benefits of Wagman Trowel Blades Benefits of Wagman Blades @ Flatter floors @ Reduced trowel marks @ Less wobble @ Less wear and tear on equipment @ No blade separation @ Maximum performance and life @ Confidence in fit @ Less returns @ Professional results 1 Torque Flex Steel 2 Rivet System 3 Mounting Brackets Wagman torque flex steel is Wagman rivets are precisely sized Wagman’s mounting brackets are specially formulated to provide and pressed to securely attach made on a state-of-the-art bar the most wear-resistant high- the mounting bracket to the blade, system ensuring every blade fits performance power trowel blade preventing separation. your power trowel the same. available. We give you more options with three different performance levels for a variety of needs. 4 Tapped Holes 5 Consistent Quality 6 Precise Bend Holes are tapped with precision to From raw materials to finished Through field testing, Wagman has provide the best possible fit to the product Wagman trowel blades are determined the precise degree of power trowel. made to provide the most balanced bend for maximum performance. wearing blade possible. 5 Poly Pro US Patent No. 7,059,801 Steel Reinforced Plastic Trowel Blades The WAGMAN Poly Pro steel reinforced plastic trowel blade eliminates the risk of leaving dark burnish marks while power troweling concrete or epoxy. The steel backing adds rigidity to the plastic, provides a harder finish and allows the blade to be used on walk-behind and ride-on power trowels.
Load more

Recommended publications
  • Concrete Equipment
    S A L E S R E 2020 N T of Lincoln HAMILTONA EQUIPMENT CO. L 8801 Highway 6, Lincoln, NE 68507 (402)S 464-6381 C H O O N M S E PRODUCTST O & PRICING ON WEBSITE: R W U N bobcatoflincoln.comC E • hamiltonequipmentco.com T R I S O N ARTICULATED LOADER DOOSAN HONDA GENERATORS COMPACT EXCAVATOR AIR COMPRESSORS MOWERS/WATER PUMPS COMPACT TRACK LOADERHavelock& ACCESSORIES Ave Centrifugal Pump SKID STEER LOADER Blow Pipe Electric Submersible ZERO TURN RIDING MOWERS 70th St. Trash Pump MINI TRACK LOADER Breaker Hammer UTILITY VEHICLES AdamsChipping St. Hammer Generators UTILITY VEHICLES Hose Waterbed Pump TRACTOR & ATTACHMENTS VERSAHANDLER Pole Tamper Mowers SEEDING EQUIPMENT Trimmers BOBCAT ATTACHMENTS Aerator YARD CARE Auger Angle Broom Box Scraper Auger Aerator Mower Auger 1 & 2 Man Bale Spear CONCRETE-DEMO PRODUCTS Food Plot Seeder Breaker Bed Edger COMPACTION EQUIPMENT Overseeder Brushcat Cable Layer/Paver Primary Seeder Brush Saw Brick Saw Hedge Trimmer Pulverizer Dozer Blade Cement Mixer Lawn Edger Rear Blade Exhaust Purifier Concrete Vibrator Lawn Mower Tiller Grader Blade Cut Break-Saw Lawn Roller Grapple Root Cut-Off Saw Lawn Trencher Land Plane Diamond Blades Log Splitter Packer Wheel Electric Hammer Metal Detector Pallet Forks Finish Tools Overseeder Planer Floor Grinder Power Rake Plate Compactor Line Level Sod Cutter Pulverizer Mortar Mixer String Trimmer/Saw Rock Bucket Power Trowel Stump Grinder Snow Blade Power Buggy Tiller Snow Blower Rammer/Jumping Jack Soil Conditioner Soff Cut Saw TRAILERS LIFT EQUIPMENT Deck Over Soil Finisher Tile Saw Drywall Lift Dump Stump Grinder Track Power Buggy Engine Hoist Flatbed Sweeper Trench Compactor Pallet Jack Enclosed Three Point Vibratory Plate Scaffold Water Tiller W.
    [Show full text]
  • Bill Baggs Cape Florida State Park
    Haw Creek Preserve State Park Approved Plan Unit Management Plan STATE OF FLORIDA DEPARTMENT OF ENVIRONMENTAL PROTECTION Division of Recreation and Parks December 16, 2016 TABLE OF CONTENTS INTRODUCTION ...................................................................................1 PURPOSE AND SIGNIFICANCE OF THE PARK ....................................... 1 Park Significance ................................................................................1 PURPOSE AND SCOPE OF THE PLAN..................................................... 2 MANAGEMENT PROGRAM OVERVIEW ................................................... 7 Management Authority and Responsibility .............................................. 7 Park Management Goals ...................................................................... 8 Management Coordination ................................................................... 8 Public Participation ..............................................................................9 Other Designations .............................................................................9 RESOURCE MANAGEMENT COMPONENT INTRODUCTION ................................................................................. 11 RESOURCE DESCRIPTION AND ASSESSMENT..................................... 12 Natural Resources ............................................................................. 12 Topography .................................................................................. 12 Geology ......................................................................................
    [Show full text]
  • Guide to Concrete Flatwork Finishes Cement Concrete & Aggregates Australia Guide
    Guide to Concrete Flatwork Finishes Cement Concrete & Aggregates Australia Guide First published March 2008 CCAA T59 © Cement Concrete & Aggregates Australia 2008 Except where the Copyright Act allows otherwise, no part of this publication may be reproduced, stored in a retrieval system in any form or transmitted by any means without prior permission in writing from Cement Concrete & Aggregates Australia. The information provided in this publication is intended for general guidance only and in no way replaces the services of professional consultants on particular projects. No liability can therefore be accepted by Cement Concrete & Aggregates Australia for its use. DESIGN AND LAYOUT Helen Rix Design TECHNICAL ILLUStratION TechMedia Publishing Pty Ltd ISBN 978-1-877023-24-8 CCAA OFFICES SYDNEY OFFICE: Level 6, 504 Pacific Highway St Leonards NSW Australia 2065 POSTAL ADDRESS: Locked Bag 2010 St Leonards NSW 1590 TELEPHONE: (61 2) 9437 9711 FACSIMILE: (61 2) 9437 9470 BRISBANE OFFICE: Level 14, IBM Building 348 Edward Street Cement Concrete & Aggregates Australia is a not-for- Brisbane QLD 4000 profit organisation established in 1928 and committed TELEPHONE: (61 7) 3831 3288 to serving the Australian construction community. FACSIMILE: (61 7) 3839 6005 CCAA is acknowledged nationally and internationally MELBOURNE OFFICE: as Australia's foremost cement and concrete 2nd Floor, 1 Hobson Street information body – taking a leading role in education South Yarra VIC 3141 TELEPHONE: (61 3) 9825 0200 and training, research and development, technical FACSIMILE: (61 3) 9825 0222 information and advisory services, and being a significant contributor to the preparation of Codes and PERTH OFFICE: 45 Ventnor Avenue Standards affecting building and building materials.
    [Show full text]
  • F36 & F46 Manual
    OPERATOR’S SAFETY AND SERVICE MANUAL F36 F46 This manual covers the following serial numbers and higher, for each model listed: F36 . 3620751. F46 . 4620500 . WALK-BEHIND TROWELS MBW, Inc. MBW Europe Ltd. 250 Hartford Rd • PO Box 440 Units 2 & 3 Cochrane Street Slinger, WI 53086-0440 Bolton BL3 6BN, England Phone: (262) 644-5234 Phone: + 44 (0) 01204 387784 Fax: (262) 644-5169 Fax: + 44 (0) 01204 387797 L21237.08.20.E Email: [email protected] Email: [email protected] ©MBW, Inc. 2015 Website: www.mbw.com Website: www.mbweurope.com Printed in the USA TABLE OF CONTENTS SAFETY INFORMATION . 1 Changing Trowel Blades . 8 Introduction . 1 Setting Safety Switch . 8 Setting Tilt Arm Carriage Bolt Height . 8 Safety Precautions . 1 Safety Decals . 1 SERVICE . .9 Safety Decals - EZ Pitch/Low Vibration Handle . 3 Torque Chart . 9 SPECIFICATIONS. 4 Service Tools . 9 Gearbox Disassembly . 9 OPERATION . 5 Gearbox Assembly . 9 Introduction . 5 Handle Removal/Installation. 10 Before Starting & Operating . 5 Gas Spring Replacement . 10 Starting Engine . 5 Low Vibration handle Cable Replacement . 11 Operating . 5 Shorting Wire Replacement . 11 Blade Pitch Adjustment (Standard). 5 Spider Bushing Removal . 11 Blade Pitch Adjustment (E-Z Pitch) . 5 Spider Bushing Replacement. 12 Handle Bar Adjustment. 5 Parts Replacement Cycles and Tolerances . 12 Stopping Engine . 6 REPLACEMENT PARTS. .13 MAINTENANCE . 7 Gearbox Assembly . 14 Maintenance Schedule . 7 Spider Assembly . 16 Fluid Levels. 7 Drive Assembly . 18 Engine Maintenance . 7 Guard Assembly. 20 Engine Oil . 7 Standard Handle Assembly . 22 Engine Speed . 7 Low Vibration Handle Assembly. 24 Cleaning . 7 EZ Pitch Handle Assembly.
    [Show full text]
  • Landscape Tools
    Know your Landscape Tools Long handled Round Point Shovel A very versatile gardening tool, blade is slightly cured for scooping round end has a point for digging. D Handled Round Point Shovel A versatile gardening tool, blade is slightly cured for scooping round end has a point for digging. Short D handle makes this an excellent choice where digging leverage is needed. Good for confined spaces. Square Shovel Used for scraping stubborn material off driveways and other hard surfaces. Good for moving small gravel, sand, and loose topsoil. Not a digging tool. Hard Rake Garden Rake This bow rake is a multi-purpose tool Good for loosening or breaking up compacted soil, spreading mulch or other material evenly and leveling areas before planting. It can also be used to collect hay, grass or other garden debris. Leaf rake Tines can be metal or plastic. It's ideal for fall leaf removal, thatching and removing lawn clippings or other garden debris. Tines have a spring to them, each moves individually. Scoop Shovel Grain Shovel Has a wide aluminum or plastic blade that is attached to a short hardwood handle with "D" top. This shovel has been designed to offer a lighter tool that does not damage the grain. Is a giant dust pan for landscapers. Edging spade Used in digging and removing earth. It is suited for garden trench work and transplanting shrubs. Generally a 28-inch ash handle with D-grip and open-back blade allows the user to dig effectively. Tends to be heavy but great for bed edging.
    [Show full text]
  • Equipment For' River Measurements
    .. UNITED STATES DEPARTMENT OF THE INTERIOR GEOLOGICAL SURVEY WATER RESOURCES BRANCH EQUIPMENT FOR' RIVER MEASUREMENTS " PLANS AND SPECIFICATIONS FOR REINFORCED CONCRETE HOUSE AND WELL FOR WATER-STAGE RECORDERS ARRANGED BY LASLEY LEE DISTRICT ENGINEER, COLUMBUS, OHIO • 1933 DlI'I\IITMDlT 0' THI INnIUOII' UNITEO STATES GEOl.OGICAL SURVEY WATER RESOURCES BRANCH EQUIPMENT FOR RIVER MEASUREMENTS CABLE TOWER AND CAR WATER-STAGE RECORDER HOUSE AND WELL CABLE TOWER AND CAR Chelan River, Chelan. Wash. Alle8heny River. Franklin, Pa. Columbia River, Rock Island. wash. MEASUREMENT BY WADING MEASUREMENT FROM CABLE MEASUREMENT FROM BRIDGE MEASUREMENT THROUGH ICE Merced River, Yosemite Valley. calif. Scioto River, Columbus, Ohio Scioto River. Dublin. Ohio Wisconsin River, Muscoda. Wis. OONTENTS Introduct1on •••••••••••••••••• ~ ••••••••••••••••••••••••• ••• 1 Construction cqllipmont •.•• " •••••••••••.•••••••••••••••••••• 4 .. Excavation •••••••••••• , .•• , •••••••••••••••••• ~.~ ••••••• ~.~ • 4 Blasting •••••••••••••• ~ •••••••••• , ••••••••••••• ~.~.~ •• 6 Concrete ••••••••••••••. .•• ~ ••••••••••••••••••• , ••• ~ •• ~.~ •• 7 Ccm811 t ................. ~ ••.•••••••• ~ •••••• ~ ••••• , •••••• 7 Fine aggregate •••••••••••••••• , ••••••••••••••••••••••• 7 Coarse aggrogate ••••••••••••••••• !' •••••••• !' •••••••••• ~ 7 ?report ions •••.• ~ • ~ .... ~ •• ~ .... .,." •. ~ •• , ••• ~. 0 •• ~. ~ ~ ~ • '•• 7 Quality of water ••••••••••••••••••• , ••••••• , •• ~, •••••• 8 Mixillg ••• ~ ••••••• '8 ••• ~ .................. , ••••••••• , •••• 8 Qua~tity of water
    [Show full text]
  • Build a Plane That Cuts Smooth and Crisp Raised Panels With, Against Or Across the Grain – the Magic Is in the Spring and Skew
    Fixed-width PanelBY WILLARD Raiser ANDERSON Build a plane that cuts smooth and crisp raised panels with, against or across the grain – the magic is in the spring and skew. anel-raising planes are used Mass., from 1790 to 1823 (Smith may to shape the raised panels in have apprenticed with Joseph Fuller doors, paneling and lids. The who was one of the most prolific of the profile has a fillet that defines early planemakers), and another similar Pthe field of the panel, a sloped bevel example that has no maker’s mark. to act as a frame for the field and a flat Both are single-iron planes with tongue that fits into the groove of the almost identical dimensions, profiles door or lid frame. and handles. They differ only in the I’ve studied panel-raising planes spring angles (the tilt of the plane off made circa the late 18th and early 19th vertical) and skew of the iron (which centuries, including one made by Aaron creates a slicing cut across the grain to Smith, who was active in Rehoboth, reduce tear-out). The bed angle of the Smith plane is 46º, and the iron is skewed at 32º. Combined, these improve the quality of cut without changing the tool’s cutting angle – which is what happens if you skew Gauges & guides. It’s best to make each of these gauges before you start your plane build. In the long run, they save you time and keep you on track. Shaping tools. The tools required to build this plane are few, but a couple of them – the firmer chisel and floats – are modified to fit this design.
    [Show full text]
  • Fletcher Business Group Acquires Atlas Saw & Tool
    FOR IMMEDIATE RELEASE Media Contact: Sarah Archambault • 917.923.9838 • [email protected] FLETCHER BUSINESS GROUP ACQUIRES ATLAS SAW & TOOL Global Solution Provider Expands Product Line and Services through Acquisition of Leading Provider of Saw Blades, Cutting Tools and Sharpening Services [East Berlin, CT – January 23, 2017] Today, Fletcher Business Group (FBG) – a leading provider of solution-driven technologies for a wide range of industries – including custom and OEM picture framing; sign and digital graphics; hardware; woodworking; and float and glass fabrication industries – is announcing the acquisition of Atlas Saw & Tool and Tem-Tech. With locations in Illinois, Florida and Arizona, Atlas provides high quality saw blades, cutting tools and sharpening services. Tem-Tech carries a high capacity saw line, along with repair/refurbish services for all saw types. Atlas Saw & Tool joins FBG’s roster of globally recognized brands as a wholly owned subsidiary and will continue the day-to-day operations of its key brands. Atlas serves a variety of markets including picture framing, cabinet making, flooring, millwork and the plastic industry. Using precise German CNC grinders and associated robotics, Atlas Saw sharpens blades and tools to OEM specifications and serves customers nationwide from its three regional tech centers. Atlas will continue to provide custom saw blade design services, fabrication and re-sharpening programs utilizing its premier selection of American and Japanese made core blades. The Tem-Tech brand offerings will remain, including the large capacity saw, CNC moulding profile template machine, saw service, repair and preventative maintenance programs. This will include service, refurbishment and parts support of Pistorius brand saws.
    [Show full text]
  • Float Switches Class 9036 – Types D and G
    Float Switches Class 9036 – Types D and G For Open Tank Or Sump Applications Class 9036 2 Pole Single Lever Operated NEMA Type 1 NEMA Type 4 NEMA Type 7, 9 Description Type Price Type Price Type Price Contacts Close on Liquid Rise. DG2 $35.60 DW31 $236. DR31 $227. Contacts Open on Liquid Rise . DG2R 38.80 DW31R 239. DR31R 230. Contacts Close on Liquid Rise. GG2 68.00 GW1 397. GR1 388. Contacts Open on Liquid Rise . GG2R 68.00 GW1R 404. GR1R 397. Order universal mounting bracket and float accessory kits separately from Class 9049 section. Types GW and GR use center hole float. Devices with Form C use Centerhole float . All others use tapped at top float. See Page 18-8 for 9049 accessories. Modifications For Type DG, DW, DR Factory Installed Field Installed Form Price 9049 Kit Price Reverse Action (Type DG) R $3.30 A58 $3.30 Compensating Spring (Type DG) C 6.50 A19 6.50 Compensating Spring (Type DR, DW) C 6.50 A20 6.50 Type DG2 Comp. Spring and Reverse Action CR 9.80 Not Available Modifications For Type GG, GW, GR Factory Installed Field Installed Form Price 9049 Kit Price Compensating Spring for Type GG2 C 8.10 9049A13 8.10 Combination of Comp. Spring & Reverse Action (Type GG2) CR 17.70 9049A13 8.10 1 N.O.-1 N.C. Contact Configuration H 9.60 Not Available Combination of Comp. Spring & 1 N.O.-1 N. C. Contact for Type GG2 CH 17.70 Not Available Reverse Action (Type GR, GW) R 9.60 Not Available Maximum Forces At Which Switches Are Tested (in ounces) Type Force Up Force Down Will Support This Weight To Trip To Trip With Compensating Spring Type GG DG2 9 8 60 DG2 Form R 8 8 60 DW31 8 8 66 DW31 Form R 8 8 66 DR31 8 8 66 DR31 Form R 8 8 66 Class 9049 Float Accessory Specifications – In Ounces Item Type A6 Type A6S Type A6C Type A6CS Type A6A Type A6CA Net Buoyancya (in Water) 7" Float .
    [Show full text]
  • March 2016 Newsletter
    March 2016 The Trowel President’s Prose Volume 4, Issue 1 Dear Members and Friends, Just when I thought that spring might be peeking around the corner, it snowed again! I've been searching in my little garden to see if any of the daffodil bulbs that I planted last autumn have come through, but on the dreary north side it remains cold and still. On the other hand I visited Esther recently and on the sunny west side of her house, she has patches of tulips already. I am sooooo envious! I hope that some of you will decide to join me as April approaches and take a little stroll through Meacham Woods. I was inspired by the speaker who told us about all the wild flowers that we may see and am hoping to do that this year. I do need someone with me who can identify them though as I am sure I won’t remember. Let us find a way to get a group together and enjoy the outdoors. Your Plant Sale committee have already been very busy making plans for the sale in May and I hope that you have placed your orders with Henia and will be ready to get up early that weekend to help unload the truck and set up for another exciting and successful event. Please note on your calendars that we change venue as of April for our monthly meetings. We will be at St. Paul Church and you will get timely reminders from the Program Committee in this respect.
    [Show full text]
  • Made in the Usa • Why Dig
    GARDENING • LANDSCAPING • TREE FARMING • TERMITE PROTECTION • GROUNDS MAINTENANCE • MADE IN THE USA • WHY DIG WHEN YOU CAN DRILL? www.powerplanter.com OUR COMPANY Hand-Welding Augers for Three Generations From Our Farm to Your Door WHO WE ARE: Power Planter® is a third generation family-owned auger manufacturer that started two decades ago in rural Illinois and is still located there today. The centennial farm where our company began making augers is a sixth generation family run farm. We have evolved over the past 30+ years from the invention and patent of our original Power Planter auger to offer a variety of different sizes, models, and even auger accessories today. Above all, we are a family business, and we strive every day to adhere to the same level of craftsmanship and work ethic the company was first founded on more than 20 years ago. OUR CORE PRINCIPLES: Though the years have passed, the core principles Power Planter was founded on remain strong. We are committed to putting our customers’ needs first – every single time. Our augers: • Are 100% made in the USA • Feature high quality, durable craftsmanship • Come with 1-on-1 customer service assistance and more We will always work hard to create high quality augers for our customers today, tomorrow, and for many years to come. OUR HISTORY: The incredible background story for our company begins over 50 years ago with the current owner’s grandfather, Wayne Niewold, near the University of Illinois at Urbana-Champaign. Wayne is the original inventor of Power Planter augers, but long before Power Planter came about, he started a successful and growing business called Hydra Fold Auger.
    [Show full text]
  • How to Process Palm Oil with the Pit
    Guidelines for the construction of a cemented palm oil pit This guideline gives the dimensions for the “1 drum pit” (75kg of cement) and “2 drums pit” (125 kg of cement). This model can be adapted by adjusting the size of the hole and the proportions of cement. Tools and Material The construction involves locally available materials, except cement which might be hardly available and costly for remote farming families. The construction requires basic masonry knowledge and tools. Materials Quantities for 1 drum pit Quantities for 2 drums pit Cement (kg) 75 (1.5 bags) 125 (2.5 bags) Sand (head pans) 15 30 Granite stones (head pans) 35 80 Stones for the floor (head pans) 10 25 Tools Measuring tape Buckets Hammer Level Head pans Sledge hammer Strings Pick axe Wooden sticks Shovel Machete Trowel Steps 1. Site selection (15 mn) It is necessary for the farmer to choose an adequate location to optimize the efficiency of the pit. In order to facilitate the process, it is advisable to locate the pit : - Within the palm trees garden to reduce the constraints of transportation. - Near to a water point (swamp, stream, well) because the process requires a large quantity of water. - On a gentle slope to allow the proper drainage of water. 2. Site preparation (15 mn) Before starting the construction, the site has to be clear of grass, branches and stones. Tools : machete and the shovel. Steps 3. First soil marking (15 mn) This soil marking helps the farmer to visualise the size of the hole he has to dig.
    [Show full text]