DOCSLIB.ORG

Files 201 Files Table of Contents

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Files 201 Files Table of Contents Files 201 Files Table of Contents For more than 200 years, PFERD files have From two centuries of experience as partner to been renowned worldwide as a top quality the metalworking industry, PFERD has developed product. With their consistently high cutting a number of ideal file shapes and cuts for performance, ensuring an excellent surface specific applications in industry and trades. quality even after long use, they reduce the cost A sophisticated manufacturing technology of labour-intensive manual work and will thus and highly sensitive ISO 9001 certified quality provide significant economic benefits. control system ensure that all products meet our exceptional quality standards. Contents Page Contents Page ■■Cut Types 3 Wood Files and Rasps ■■Well Packed and Presented 4 Wood Rasps 37-38 ■■General Information 5 Wood Files 38 American Pattern Files Aluminum Files 6 Hoof Plane 39 Machinist’s Files 7-14 Horse Rasp 39 Special Files 14 Machinist File Set 14 Key Files 15-16 Sculptor‘s File Rasp 40 Staircase Maker‘s File Rasp 41 Staircase Maker‘s Rasp 41 Sharpening Files Needle Rasp Set 41 Chain Saw Files 17-18 Diamond Files Handles 18 Diamond Machinist’s Files 42 CHAIN SHARP 19 Diamond Needle Files 43 Depth Gauge Files 19 Diamond Riffler Files 44 Mill Files 20-21 Taper Saw Files 22-23 File Handles, File Holders, File Sleeves, File Brush Cant and Band Saw Files 23 Ergonomic File Handles 45 Plastic File Handles 45 Precision Files Plastic File Handle, Swiss Pattern Machinist Files 24-27 Quick Mounting Type 45 Needle File Holders 46 Riffler File Holders 46 Swiss Pattern CORINOX Files 28-29 File Card and Brush 46 Swiss Pattern CORINOX Needle Files 29 Swiss Pattern Needle Files 30-32 Plastic Sleeves 46 Needle File Sets 32 Swiss Pattern Riffler Files 33 Milled Tooth Files Hand Deburrer Car Body Files 34-35 Hand Deburrer 47 Paint Peeler 35 Babbitt Files 36 Edge Sharpener 36 PAGE CATALOGUE 2 I 201 Files Cut Types American Pattern Files Sharpening Files Cut 0 Single cut. Cut 1 Single cut. For aluminum and soft steel. For universal sharpening. 201 Cut 1 Cross cut. Cut 2 Single cut. Suited for coarse machining and for For universal sharpening. coarse stock removal. Cut 2 Cross cut. Cut 3 Single cut. For universal coarse stock removal For universal sharpening. and prefinishing. Cut 3 Cross cut. Wood Rasps For fine work and prefinishing. Cut 1 Rasp cut. Recommended for coarse machining and for coarse stock removal. Car Body Files Cut 00 Radial tooth cut. Cut 2 Rasp cut. Recommended for high stock For universal coarse stock removal removal. and prefinishing. Creates score-free surfaces Cut 0 Radial tooth cut. Cut 3 Rasp cut. Recommended for high stock For fine work and prefinishing. removal. Creates score-free surfaces. Cut 1 Radial tooth cut. Precision Files Recommended for coarse stock Cut 00 Cross cut. removal and roughing. Recommended for very coarse Creates score-free surfaces. precision work. Cut 2 Radial tooth cut. For universal coarse stock removal Cut 0 Cross cut. and smoothing. Recommended for very coarse preci- Creates score-free surfaces. sion work. Cut 3 Radial tooth cut. Recommended for fine stock removal Cut 1 Cross cut. and for prefinishing. Recommended for medium precision Creates score-free surfaces. work. Milled Tooth Files Cut 1 Straight tooth cut. Cut 2 Cross cut. Recommended for coarse stock re- Recommended for medium to fine moval when working on soft metals. precision work. The shape of the milled tooth and large flutes prevent clogging problems. Cut 3 Cross cut. Recommended for fine precision Cut 2 Straight tooth cut. work. Recommended for universal coarse stock removal and prefinishing on soft metals. Cut 4 Cross cut. The shape of the milled tooth and Recommended for very fine precision large flutes prevent clogging work. problems. Cut 3 Straight tooth cut. Recommended for coarse machining of soft metals. The shape of the milled tooth and large flutes prevent clogging problems. CATALOGUE PAGE 201 I 3 Files Well Packed and Presented Classical Industrial Packaging Advantages The oldest hand tool in the world is traditionally ■■Robust packaging suited to the product. rolled into paper which protects it against ■■ corrosion. PFERD packs all standard file deliveries Coloured packaging labels mark the different in robust industrial packaging. file cuts. ■■ Depending on the file length, we offer For the experienced user who has their own handle. packaging units of 5 or 10 pieces. These files are delivered without a handle. The PERFECT FILE Advantages PFERD also offers from its wide-ranging ■■Each file is delivered with the ergonomic file program a selection of the most commonly-used handle. files in attractive protective sleeves for sales ■■ promotions. Protective, individual packaging perfectly suited to the product. Files in PERFECT FILE packaging are marked in ■■ the catalogue and in the product tables with a Individual labelling with barcode. “P” at the end of the product EDP Number. ■■Easy to hang for direct sale on your sales wall. Machinist‘s files in PERFECT FILE packaging ■■Application information allows quick selection are highly recommended for sales-promoting of products. presentations at a point of purchase. ■■Popular types can be positioned effectively at Our PERFECT FILE files are clearly labelled to a point of purchase. help the customers find the file they need more quickly and can be attractively presented with ■■The superb product presentation of PFERD the PFERD TOOL-CENTER. files supports you in selling brand-name quality tools. PAGE CATALOGUE 4 I 201 Files General Information The Quality of PFERD Files is Determined by Several Criteria 201 The Prerequisite for the Correct Hardness is Exact Shape and Symmetrical Cut Ideal Tooth Shape Uniform Steel Structure The blanks are shaped by forging, grinding and Individual tooth shapes for particular applica- The steel structure is changed by the profiling, smoothing. Equally spaced teeth and uniform tions allow maximum stock removal. There is annealing and hardening process. The right tooth height guarantees good filing perfor- no standard tooth shape. Special test results carbon content must be maintained to ensure mance. File type and angle of cut are deter- have revealed which tooth shapes are the most maximum cutting performance. mined by the application. favorable. The photo shows a car body file tooth with the typically rounded tooth face and the chip clearance area. Number of Teeth per Inch Machinist‘s files Sharpening files The chart to the left shows the number of teeth Length of PFERD files listed in our catalogue 201. The (with- Teeth number ± 8 % Teeth number ± 5 % figure shows the number of cuts per inch of file out Mill Saw File tang) Bastard Second Smooth Extra Double length, counted in the longitudinal axis. For a Regular Slim Bastard Second Smooth [Inch] Cut 1 Cut 2 Cut 3 Slim Extra Slim (Cut 1) (Cut 2) (Cut 3) double-cut file, the teeth number is determined by the upcut (second course). 4 43 56 71 51 58 66 – – – – 5 – – – 48 56 61 64 – – – Determination of Teeth Number 6 33 46 56 43 51 56 61 51 61 71 1 Inch Overcut Tang 7 – – – 41 48 53 58 – – – 8 25 36 46 38 43 51 56 46 51 56 File 10 23 30 41 36 41 43 – 41 46 51 axis 12 20 28 36 – – – – 36 41 46 23 Teeth Up Cut Heel 14 18 25 33 – – – – 31 36 41 Example At a length of 10“ bastard cut file has 23 teeth Colour Code for File Cuts per inch. A 4“ long file of the same cut has 43 teeth per inch of file length. The higher Cuts are easily identified by colour-coded package labels. number of teeth found on shorter files is intended to provide the same ease of use (in terms of force input, guidability and stock removal) on surfaces and edges as a longer tool. Hand Hand Hand 10 Planas paralelas 10 Planas paralelas 10 Planas paralelas Dimensions Inches bastard Inches Second cut Inches Smooth File Length Tang basto medio fino 1112 10“ 1 1112 10“ 2 1112 10“ 3 The cross-sectional dimensions indicated in the following tables are measured across the cut and may vary depending on cut type. Bastard = green Second = yellow Smooth = red PFERD files are manufactured in accordance to ISO standard specifications. CATALOGUE PAGE 201 I 5 American Pattern Files Aluminum Files Aluminum Flat This file has fast cutting teeth specially Application PFERD Specification Number designed for use on aluminum alloys, soft steel ■■Surface work 1612 W and various non-ferrous metals. ■■Deburring Single cut, uniform in thickness, special tooth ■■Shaping and refining of rectangular shapes construction eliminates clogging. Length Cross-section Cut and EDP Number Compatible [Inches] [Inches] Cut 0 Handle EDP 8 3/4 x 7/32 17102 11146 10 10 31/32 x 1/4 17103 11146 10 12 1-5/32 x 9/32 17104 11148 5 Aluminum Half Round Like the flat aluminum, this file is made Application PFERD Specification Number especially for use on aluminum and soft metals. ■■Surface work 1652 W The half round shape permits filing on concave ■■Deburring surfaces and rounding out holes. ■■Shaping and refining of rectangular and The flat side is single cut and the half round side round through-holes is spiral cut. ■■Filing of curved shapes Length Cross-section Cut and EDP Number Compatible [Inches] [Inches] Cut 0 Handle EDP 10 15/16 x 9/32 17107 11146 10 12 1-1/8 x 11/32 17108 11148 5 PAGE CATALOGUE 6 I 201 American Pattern Files Machinist’s Files Flat 201 Tapered in width at the point and slightly Application Ordering Note tapered in thickness at the point, flat files are ■■Surface work EDPs ending in “P” include handle.
Load more

Recommended publications
  • Tool and Die Maker Level 1
    Tool and Die Maker Level 1 Rev. March, 2013 Tool and Die Maker Unit: A1 Safety in the Machine Shop Level: One Duration: 7 hours Theory: 7 hours Practical: 0 hours Overview: This unit of instruction is designed to introduce safety requirements and Workplace Hazardous Materials Information System, WHMIS, identification and compliance with machine shop (basic) safety, and safe procedures used in erecting and securing block and tackle equipment according to manufacturer’s guidelines. Material covered includes: Safety requirements and WHMIS Machine shop (basic) safety Block and tackle fundamentals Percent of Objectives and Content: Unit Mark (%) 1. Identify the safety requirements as they apply to WHMIS with 25% emphasis on a. Positive perspective regarding accident prevention and job site safety b. WHMIS defined and the format used to convey information about hazardous materials in the workplace c. Information found on supplier and workplace labeling using WHMIS d. Information from Manitoba Labour, Workplace and Safety and Health Division - Workplace Bulletins e. Hazardous materials in accordance with WHMIS f. Compliance with government safety standards and regulations 2. Identifies and complies with machine shop (basic) safety: 50% a. General safety precautions b. Housekeeping, personal protective equipment, clothing c. Guards d. Grinding e. Block and tackle f. Specific health hazards and associated precautions Fumes and skin-contact with toxic substances Mechanical vibration Noise g. Fire prevention controls Types of fire-fighting equipment Types of fires Personal protective clothing h. Installation, maintenance and inspection of safety equipment Fire extinguishers 1 Rev. March, 2013 i. Personal Protective equipment Dust mask Respirator Hearing protection Safety glasses Protective clothing 3.
    [Show full text]
  • Tool & Die Maker
    Tool & Die Maker (Press Tools, Jigs & Fixtures) GOVERNMENT OF INDIA MINISTRY OF SKILL DEVELOPMENT & ENTREPRENEURSHIP DIRECTORATE GENERAL OF TRAINING COMPETENCY BASED CURRICULUM TOOL & DIE MAKER (PRESS TOOLS, JIGS & FIXTURES) (Duration: Two Years) CRAFTSMEN TRAINING SCHEME (CTS) NSQF LEVEL- 5 SECTOR – CAPITAL GOODS AND MANUFACTURING Tool & Die Maker (Press Tools, Jigs & Fixtures) TOOL & DIE MAKER (Press Tool, Jigs & Fixture) (Engineering Trade) (Revised in 2018) Version: 1.1 CRAFTSMEN TRAINING SCHEME (CTS) NSQF LEVEL - 5 Developed By Ministry of Skill Development and Entrepreneurship Directorate General of Training CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE EN-81, Sector-V, Salt Lake City, Kolkata – 700 091 Tool & Die Maker (Press Tools, Jigs & Fixtures) ACKNOWLEDGEMENT The DGT sincerely acknowledges contributions of the Industries, State Directorates, Trade Experts, Domain Experts and all others who contributed in revising the curriculum. Special acknowledgement is extended by DGT to the following expert members who had contributed immensely in this curriculum. List of Expert members contributed/ participated for finalizing the course curriculum of TDM (Press Tools, Jigs & Fixtures) trade held on 16.05.17 at Govt. ITI- Aundh, Pune Name & Designation S No. Organization Remarks Shri/Mr./Ms. Industry Experts 1. Dr. K C Vora, Sr. Dy. Director & The Automotive Research Chairman Head, Arai Academy Association of India, S.No.102, Vetal Hill, Off Paud Road, Kothrud, Pune 2. Jayanta Patra, Sr. Manager Micromatic Machine Tools (P) Ltd. Member 240/241,11th Main, 3rd Phase, Peenya Industrial Area, Bangalore 3. Kashinath M. Patnasetty, Head Ace Designers Ltd. Plot No. 7&8, II Member - Application Support Group Phase Peenya Industrial Area, Bangalore 4.
    [Show full text]
  • File Identification Chart
    FILE IDENTIFICATION CHART American Pattern Swiss Pattern American Flat File — Rectangular cross section. Tapered point. Double cut top and bottom. Swiss Pattern Files have more exacting measurements and finer cuts ranging from № 00 to Single-cut edges. Special tooth construction eliminates clogging. All sizes have the same number 6. Used by tool and die makers, jewellers, modellers, craftspeople and hobbyists. Available in the of teeth. 6" – 12" long. following types and length: American Flat File Aluminum Half-Round File — Rounded on one side, flat on the other. Tapered point. • Half Round File — № 00, 0, 1, 2, 3 and 4. 4" – 10" long. Double-cut. Special tooth construction eliminates clogging. All sizes have the same number of teeth. • Hand File — № 00, 0, 1, 2 and 4. 4" – 10" long. Aluminum Half-Round File Smooth finish. 6" – 12" long. • Knife File — № 00, 0, 1, 2 and 4. 4" – 8" long. Flat File — Rectangular cross section. Tapered point. Double-cut top and bottom. Single-cut • Round File — № 00, 0 and 2. 4" – 10" long. Flat File edges. Bastard, second and smooth cuts. For rapid stock removal. 4" – 16" long. • Round Straight File — № 0. 4", 6" and 8" long. Half-Round File — Rounded one side, flat on the other. Double-cut top and bottom. Bastard, second and smooth cuts. For filing concave, convex and flat surfaces. 4" – 15" long. • Square File — № 00, 0 and 2. 4", 6" and 8" long. Half-Round File Hand File — Rectangular cross section. Double-cut top and bottom. One safe edge and one • Three Square File — № 00, 0, 1 and 2.
    [Show full text]
  • Files 201 Files Table of Contents
    Files 201 Files Table of contents For 200 years, PFERD has been manufacturing State-of-the-art production technology and files of a world-renowned high quality. Many strict quality controls guarantee the outstand- years of experience as a tool manufacturer ing PFERD quality. have led to the steady development of PFERD files. PFERD is certified according to ISO 9001. Application-oriented file shapes and cuts for industry and crafts guarantee good economic value. Even after long use, PFERD files achieve high stock removal rates and an excellent surface quality. Contents Page Application Contents Page ■■Well packed and presented, PFERDERGONOMICS® 3 Wood files and rasps ■■The fast way to the best tool 4 ■■The most common PFERD cuts 5 Wood files 33 ■■PFERD quality, number of teeth 6 Wood rasps 34 Application Contents Page Hoof plane and Files horse rasp 36 Files for the workshop Special rasps 37 Machinist's files, DIN series 7 Needle rasps 38 Special files 13 Precision files Key files 16 Precision files, tanged 40 Tungsten point files 18 CORINOX® files 44 Car body files CORINOX® needle files 45 Car body file blades 19 Needle files 46 Adjustable holders for car body files 19 Handy files 50 Car body files, tanged type 20 Riffler files, 51 riffler rasps Paint peeler 20 File handles, file sleeves, file brush Milled tooth files File handles 56 Milled tooth files, File handles tanged type 21 quick-mounting type 57 Milled tooth file blades 22 Riffler file holder 57 Holders for file blades 22 Plastic sleeves, empty 57 Universal chamfer file 22 File brush 58 Tungsten carbide files Hand deburrer Tungsten carbide files 23 Hand deburrer 59 Holders for tungsten carbide files 23 Sharpening files Three square saw files 24 More detailed information and ordering data for diamond files can be found in Knife sharpening files 26 Catalogue 205.
    [Show full text]
  • Oral and Maxillofacial Surgery
    ORAL AND MAXILLOFACIAL SURGERY 3rd EDITION 2/2012 US Chapter Pages 1 BASIC SETS OMFS-SET 1-36 TELESCOPES AND INSTRUMENTS FOR FRAKT 37-54 2 ENDOSCOPIC FRACTURE TREATMENT TELESCOPES AND INSTRUMENTS FOR TMJ 55-60 3 ARTHROSCOPY OF TEMPOROMANDIBULAR JOINT TELESCOPES AND INSTRUMENTS FOR DENT 61-80 4 MAXILLARY ENDOSCOPY TELESCOPES AND INSTRUMENTS DENT-K 81-120 5 FOR DENTAL SURGERY TELESCOPES AND INSTRUMENTS SIAL 121-134 6 FOR SIALENDOSCOPY 7 FLEXIBLE ENDOSCOPES FL-E 135-142 8 HOSPITAL SUPPLIES HS 143-240 9 INSTRUMENTS FOR RHINOLOGY AND RHINOPLASTY N 241-298 10 BIPOLAR AND UNIPOLAR COAGULATION COA 299-312 11 HEADMIRRORS – HEADLIGHTS OMFS-J 313-324 12 AUTOFLUORESCENCE AF-INTRO, AF 325-342 13 HOLDING SYSTEMS HT 343-356 VISUALIZATION SYSTEMS OMFS-MICRO, OMFS-VITOM 357-378 14 FOR MICROSURGERY OMFS-UNITS-INTRO, UNITS AND ACCESSORIES U 1-54 15 OMFS-UNITS COMPONENTS OMFS-SP SP 1-58 16 SPARE PARTS KARL STORZ OR1 NEO™, TELEPRESENCE 17 HYGIENE, ENDOPROTECT1 ORAL AND MAXILLOFACIAL SURGERY 3rd EDITION 2/2012 US Important information for U.S. customers Note: Certain devices and references made herein to specific indications of use may have not received clearance or ap- proval by the United States Food and Drug Administration. Practitioners in the United States should first consult with their local KARL STORZ representative in order to ascertain product availability and specific labeling claims. Federal (USA) law restricts certain devices referenced herein to sale, distribution, and use by, or on the order of a physician, dentist, veterinarian, or other practitioner licensed by the law of the State in which she/he practices to use or order the use of the device.
    [Show full text]
  • Tool and Die Makers, Turret and Engine Lathe Operators, Sheet Metal
    DO CU M E N T R ES U ME ED 025 582 VT 000 415 A Survey of Demand in Selected MetalworkingOccupations for Major Areas of Idaho. Idaho State Dept. of Employment, Boise. Pub Date Oct 66 Note- 34p. EDRS Price MF-$0.25 HC-$1.80 Descriptors-*Educational Needs, Employer Attitudes, *EmploymentOpportunities, *Employment Projections, Employment Statistics, Labor Supply, Metal WorkingOccupations, Occupational Information,*Occupational Surveys, Questionnaires, Skilled Occupations, Trade andIndustrial Education Identifiers- Idaho To determine the state and area impactof occupational shortages inthe metal working,skills in Idaho and to provide abasis for planningeffective vocational education programs, the IdahoDepartment of Employmentconducted a sample survey of 68 employers in the metal workingoccupations. The occupations wereselected from a national list of hard-to-findmetal workers and ihcludedmachinists, welders, tool and die makers, turret and enginelathe operators, sheetmetal workers, structural steel workers, andboilermakers. The study,conducted inApril1966, .encompasses the ninemost populous counties inIdaho including 55 percentof the (1) The lack of qualified metalworkers has population. Some weneral conclusions were: of the not caused curtailmentof operation, (2) More welderswill be needed than any other survey occupations, (3)The demand for qualifiedmachinists should remain at a high level and (4) Seasonality inthe total employment ofworkers was implied bythe survey for the occupationsof welders, structural steelworkers, sheet metal workers, machinists, and. boilermakers.Statistical data is presented intable form and the interview questionnaire is included inthe appendix. (DM) 4 Ow. 111111111111111 11111111higill U.S. DEPARTMENT OF HEALTH, EDUCATION & WELFARE OFFICE OF EDUCATION THIS DOCUMENT HAS BEEN REPRODUCED EXACTLY AS RECEIVED FROM THE PERSON OR ORGLNIZATION ORIGINATING IT.POINTS OF VIEW OR OPINIONS STATED DO NOT NECESSARILY REPRESENT OFFICIAL Of FICE OF EDUCATION POSITION OR POLICY.
    [Show full text]
  • TOOL & DIE MAKER (Press Tool, Jigs & Fixture) (Dual Mode)
    CURRICULUM FOR THE TRADE OF TOOL & DIE MAKER (Press Tool, Jigs & Fixture) (Dual Mode) UNDER DUAL TRAINING SYSTEM BY GOVERNMENT OF INDIA MINISTRY OF SKILL DEVELOPMENT & ENTREPRENEURSHIP DIRECTORATE GENERAL OF TRAINING 1 PROPOSED TIME DISTRIBUTION FOR TOOL & DIE MAKER (PRESS TOOL JIGS & FIXTURE) TRADE UNDER INDUSTRY INSTITUTE - TRAINING SCHEME BLOCK THEORY PRAC. WSC/ ENGG. EMP. ECA, REM. WITH CAL DRG. SKILL LIB. & DURATION OTHERS BLOCK – I 510 hrs. 830 hrs. 170 250 110 50 hrs. 160 hrs. (12 hrs. hrs. hrs. Revision months/52 & Test Weeks duration ) Institute level trg. BLOCK – II --- 1560 HRS. --- --- --- --- --- (09 months /39 weeks duration) Industry level trg. BLOCK – III 100 hrs. 210 hrs. 50 60 hrs. --- 20 hrs. Last 2 (3 months/ (Practical hrs. weeks 13 Weeks practice and revision duration) submission of & exam. Institute report related level trg. to industry training) GRAND 610 2600 HRS. 220 310 110 70 HRS. 240 TOTAL HRS. HRS. HRS. HRS. HRS. Total duration of training inclusive of Industry & Institute is 2 years (4160 HRS.) 2 GENERAL INFORMATION FOR INSTITUTE (ITI) 1. Name of the Trade : Tool & Die Maker (Press Tool, Jigs & Fixture ) (Dual mode) 2. NCO Code No. : 7222.0200, 7222.0300, 7223.0200 3. Duration of Craftsmen Training : Two years (Three Blocks) 4. Power norms : 20 KW 5. Space norms : 166 Sq. mt. 6. Entry qualification : Passed 10th Class with Science and Mathematics under 10+2 system of Education or its equivalent 7. Trainees per unit : 16 (Supernumeraries/Ex-Trainee allowed:5) 8 a. Qualification for Instructor : Degree in Mechanical Engineering from recognized Engineering College/university with minimum two-year experience in the relevant field.
    [Show full text]
  • Endodontics د.شذى Lec.4
    Endodontics د.شذى Lec.4 Endodontic Instruments: There are many instruments used in the different phases of endodontic treatment and they are as follows: General Instruments 1) Endodontic explorer: A double end instrument, one end is straight used to locate the root canal orifices after the removal of the pulp chamber, and the other end is L-shaped which aids in detecting the unremoved parts of the tooth as the roof of pulp chamber. 2) Plastic instruments: It has two ends; the first is used to carry temporary filling material. The opposite end is used as a plugger to condense cement and base materials in the root canal. 3) Endodontic excavator: It is larger than a spoon excavator, used to allow excavation of the contents of the pulp chamber. It is also used in curettage of periapical lesions in surgical endodontics (apicectomy). 4) Endodontic locking pliers (tweezer): It has a lock that allows materials to be held without continuous finger pressure; also it has a groove which facilitates holding gutta percha and absorbing points. 1 5) Endodontic ruler: It is a metal ruler made of 0.5mm divisions. It is a convenient instrument to measure reamers, files and gutta percha. 6) Endodontic syringe: It is used to carry irrigating solution into the root canal. The tip of the instrument is flat to prevent penetration of the needle to the small canals; also it has a groove in its tip to permit the irrigation which might be under pressure to flow coronally rather than forcing it to the apical foramen causing post-operative pain.
    [Show full text]
  • Hand Tools Catalog
    PRODUCT CATALOG TABLE OF CONTENTS CORDLESS POWER TOOLS HAND TOOLS 12V & 20V MAX* Chargers . .23 Clamps - Bar Clamps (Small, Medium & Large) . 119 12V MAX* Combo Kits . 22 Clamps - Bar Clamps (Rapid Return) . 119 18V Combo Kits . 20 Cutting Tools - 5-in-1 Hacksaw & Blades. 117 20V MAX* Combo Kits . 19 Cutting Tools - Flush Cut Saw . 117 36V Combo Kits . 19 Cutting Tools - Jab Saws (Folding & Standard). 117 Adhesive Dispensers . .16 Cutting Tools - Multi-Purpose Saw . 117 Band Saws . 16 Cutting Tools - Panel Saws. 118 Batteries & Chargers . .23 Cutting Tools - Knives & Blades . 115-116 AUTOMOTIVE Bi-Metal Cordless Bandsaw Blades . 16 Glue Gun & Riveter . 114 Air Tools . 140 Charger/Radio. 22 Hammers . 120 Combination Wrench Sets . 129 Circular Saws . .13 Hex Keys (Folding Locking) . 123 Drive Sockets . 133-138 Concrete Vibrator . 14 Hex Keys (Ratcheting T Handle) . 123 Drive Socket Sets . 130-131 Cut-Off Tools . 15 Laser Distance Measurers . 108 Mechanics Tool Sets . 129 Cut-Out Tool . 12 Laser Levels . 106-107 Metal Storage . 140 Drill/Drivers . 5 Laser Level Accessories . 109-110 Ratchets . 129 Flashlights. 17 Marking & Layout - Chalk, Chalk Reels / Kits . 104 Reversible Ratcheting Wrench Sets . 129 Floodlights. 17 Marking & Layout - Premium Rafting Square . 104 Sockets Accessories . 139 Hammerdrills . 4 Marking & Layout - Levels . 105 Socket Sets . 129 Measuring Tools - Short Tapes & Long Tapes. 103 Wrenches . 132-133 Heated Gear . .18 Multi Tools. 119 Impact Drivers . 7 Nail Sets . 121 Impact Wrenches . 8 Optical Levels . 107 Instruments . .17 Pliers . 122-123 Jig Saws. 13 Pry Bars . 121 Metal Cutting Saws. 13 Screwdriver & Screwdriver Sets . 112 Nailers . .15 Staplers & Staples .
    [Show full text]
  • OPERATOR's MANUAL 9 In. (229 Mm) BAND SAW BS902
    OPERATOR'S MANUAL 9 in. (229 mm) BAND SAW BS902 Your new Band Saw has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Thank you for buying a Ryobi tool. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS Introduction ......................................................................................................................................................................2 Rules for Safe Operation ............................................................................................................................................. 3-5 Electrical...........................................................................................................................................................................6 Glossary of Terms ............................................................................................................................................................7 Features ....................................................................................................................................................................... 7-9 Unpacking ........................................................................................................................................................................9
    [Show full text]
  • The Original. Versatile and Powerful
    iNTEriOr CONSTruCTiON The Original. Versatile and powerful. FEiN MultiMastEr – the universal system for interior construction and renovation NEW! Now available in a cordless version From the inventor of the power tool: FEIN MultiMaster. More than 40 year’s experience is built into this system. Original FEiN accessories – developed for the MultiMastEr. FEIN brought the first oscillating power tool to the market Original FEIN accessories guarantee outstanding results and an over 40 years ago. These decades of experience are built into unrivalled long service life. It handles all common renovation and the FEIN MultiMaster, making this universal system for interior interior construction work for professionals and also provides construction and renovation unique in its diversity of applications unique application solutions. Maximum performance, safety and and performance. In addition, the MultiMaster impresses with high reliability are guaranteed with the FEIN MultiMaster. quality components and is an indispensible companion for trade and industrial professionals. Technology / Quality The Original Page 4 The MultiMaster Page 6 The MultiMaster Cordless Page 7 Accessories know-how Page 10 2 FEiN MultiMastEr Cordless – mobile and powerful. Your benefits with FEiN oscillating power tools: The new battery version makes the FEIN MultiMaster more flexible and convenient than ever. Cordless, but with identical performance, ɰ More than 40 year’s experience with oscillation technology. so work can be done anywhere, even without a power supply. And ɰ The high “Made in Germany” quality you expect. all this in the durable quality that you expect from a real Original. ɰ Unrivalled performance and versatility. ɰ Original FEIN accessories for perfect results and maximum tool life.
    [Show full text]
  • Occupational Standard/ Qualification Pack – Under Industry Validation
    Occupational Standard/ Qualification Pack – Under Industry Validation 1. Qualification Pack - Draughtsman - Civil 2. Qualification Pack - Draughtsman - Piping 3. Qualification Pack - Electroplating Operator 4. Qualification Pack - Flux Cored Arc Welder (Semi-Automatic) 5. Qualification Pack - Forger 6. Qualification Pack - Lab Technician - Metal Testing 7. Qualification Pack - Lab Technician - Radiographic Testing 8. Qualification Pack - Manual Metal Arc Welder Level 2 9. Qualification Pack - Manual Metal Arc Welder Level 3 10. Qualification Pack - Manual Metal Arc Welder Level 4 11. Qualification Pack - Operator - Broaching Machine 12. Qualification Pack - Operator - Plate Bending Machine 13. Qualification Pack - Operator - Shot Blasting and Grit Blasting 14. Qualification Pack - CNC Operator - Electric Discharge Machine (Spark Erosion) 15. Qualification Pack - CNC Setter cum operator - Electric Discharge (Spark Erosion) Machine 16. Qualification Pack - Operator - Electric Discharge Machine (Spark Erosion) (Non-Conventional) 17. Qualification Pack - Setter cum Operator - Electric Discharge (Spark Erosion) (Non-Conventional) 18. Qualification Pack - Oxy fuel gas cutter Level 2 19. Qualification Pack - Oxy fuel gas cutter Level 3 20. Qualification Pack - Plasma Cutter Manual 21. Qualification Pack - Resistance Spot Welding Machine operator 22. Qualification Pack - Stud welding operator 23. Qualification Pack - Submerged Arc Welder 24. Qualification Pack - Tool and Die Maker 25. Qualification Pack - Tungsten Inert Gas Welder Level 4 Please click here to visit the Latest Updated Draft of Qualification Packs. (Link it to http://jmp.sh/beQNnVm) If you are from the Capital Goods Sector and want to become part of draft Qualification Pack validation. Please feel free to write to us on [email protected] for details. .
    [Show full text]