City of Miami Police Department Marine Patrol Office D N A

CITY OF MIAMI CITY OF MIAMI DEPARTMENT OF REAL ESTATE & ASSET MANAGEMENT

CITY OF MIAMI POLICE DEPARTMENT A-0 COVER SHEET/LIFE SAFETY PLAN D-1 DEMOLITION PLAN A-1.1 GENERAL NOTES A-1.2 FIRE PENETRATIONS DETAILS MARINE PATROL OFFICES A-2.1 CONSTRUCTION PLAN A-2.2 WALL SECTIONS & DETAILS A-2.3 DOOR SCHEDULE & DETAILS A-3.1 REFLECTED CEILING PLAN AT WATSON ISLAND A-4.1 ELECTRICAL LOCATION PLAN A-5.1 FINISH LOCATION PLAN & SCHEDULE A-6.1 INTERIOR ELEVATIONS

E-0.1 ELECTRICAL GENERAL NOTES, SYMBOL, LEGEND [B-99009214/995016400] E-0.2 ELECTRICAL PANEL SCHEDULE,CALCULATIONS, AND RISERS E-1.1 ELECTRICAL SECOND FLOOR PLAN

1001 MacArthur Causeway M-0.1 MECHANICAL GENERAL NOTES, SYMBOL,LEGEND AND DETAILS Miami, Fl, 33132 M-1.1 MECHANICAL SECOND FLOOR P-0.1 PLUMBING GENERAL NOTES, SYMBOL, LEGEND AND DETAILS P-1.1 PLUMBING SECOND FLOOR INTERIOR RENOVATIONS

Permit Stamps: Miami, Fl, 33132

99009214/995016400

MIAMI AVE MIAMI BISCAYNE BLVD BISCAYNE

NW 7 AVE 7 NW NORTH BAY NW 79 ST CAUSEWAY MARINE PATROL

1001 MacArthur Causeway NW 17 AVE 17 NW

DRAWN BY: NW 71 ST ANDRE BRYAN

NW 62 ST BISCAYNE BAY

NW 54 ST NW 27 AVE 27 NW

JULIA TUTTLE NW 37 AVE 37 NW NW 42 AVE 42 NW CAUSEWAY NW 36 ST

NW 20 ST

VENETIAN CITY OF MIAMI POLICE DEPARTMENT

NW 57 AVE 57 NW CAUSEWAY WATSON ISLAND NW 7 ST MAC ARTHUR CAUSEWAY FLAGLER ST

PORT

SW 8 ST OF MIAMI

SW 47 AVE 47 SW SW 67 AVE 67 SW S.W. 22 ST

VIRGINIA KEY S.W. 40 ST

DINNER KEY

CITY LIMITS

Seal: DESIGN CRITERIA NOTE: IN ADDITION ALL WORK TO CONFORM FLORIDA ACCESSIBILITY CODE NATIONAL ELECTRICAL CODE (NEC) FLORIDA FIRE PREVENTION CODE (FFPC) FLORIDA BUILDING CODE, PLUMBING FLORIDA BUILDING CODE, FUEL GAS FLORIDA BUILDING CODE, MECHANICAL FLORIDA BUILDING CODE, EXISTING (FBC-EB) FLORIDA BUILDING CODE, (FBC-B) PROJECT DESCRIPTION BASED ON N.F.P.A 101 (2012 EDITION) APPLICABLE TRADE CODES, LAW & REGULATIONS. & ONE STORY TENANT, NO STRUCTURAL WORK. BUILDING. BUILDING IS ATTACHED TO ADJACENT STRUCTURE INTERIOR REMODEL BUILD OUT IN AN EXISTING 2 STORY APPLICABLE CODES *SHADED AREA DENOTES NOT IN CONTRACT Scale: 1/8" = 1'-0" Ground Floor Life Safety Plan FIFTH EDITION FIFTH EDITION FIFTH EDITION FIFTH EDITION FIFTH EDITION FIFTH EDITION 2014 EDITION 2014 EXISTING CONCRETE SIDE WALK EXISTING OPEN PARKING EXISTING N.I.C. 1001 MACARTHUR CSWY PROPERTY ADDRESS LIFE SAFETY BUILDING DESCRIPTION PUBLIC WORKS CITY OF MIAMI-MIA YACHT OWNER MIAMI, FL 33132-1612 ASSET MANAGEMENT DIVISION N.F.P.A. 101 (2014 EDITION) PER F.E.B.C. 2014, SECTION 404 FOLIO: 01-3231-000-0011 CLASSIFICATION OF WORK = ALTERATION LEVEL 2 WORK CO/TCO APPROVAL" 2 STORY BUILDING (TYPE I A) PER 601 TABLE F.B.C. (2014) "ALL MISSING, BROKEN, CRACKED, AND UPLIFTED SIDEWALKS SHALL BE RECONSTRUCTED PRIOR TO PUBLIC N.I.C. N.I.C. EXISTING EXTERIOR WALKWAY (N.I.C.) City of Miami Police Department LOT SIZE : 117,777 SQ.FT YEAR BUILT : 1947 ADJUSTED AREA : 7,713 SQ.FT TRAVEL DISTANCE = 46'-8" N.F.P.A. LEVEL OF REHAB 1,229 SQ. FT./ 100 = 12 PERSONS 1 PERSON PER 100 SQ. FT. OF GROSS FLOOR AREA OCCUPANCY CLASSIFICATION USABLE SQUARE FOOTAGE = 1,229 SQ. FT. (REMODEL AREA) LIFE SAFETY CLASS OF REHABILITAION AS PER N.F.P.A.: OCCUPANT LOAD GROUP B (BUSINESS - OFFICE) REQUIRED PROVIDED OFFICE COMMON PATH = 32' 12 PEOPLE 100 GROSS EXISTING N.I.C. LOAD OCCUPANT *SHADED AREA DENOTES NOT IN CONTRACT Scale: 1/8" = 1'-0" Second Floor Life Safety Plan UNSPRINKLERED 47' 200' TRAVEL DISTANCE RENOVATION SPRINKLERED 300' N/A DEAD END TRAVEL N/A 50' COMMON 100' 30' PATH COMMON PATH = 30' CORRIDOR RATING N/A N/A Marine Patrol EXITS # OF 1 2 LIFE SAFETY CODE NOTES: UNDER THE 50- PERSON LIMITATION.....OCCUPANCY OF ANY ROOM OR SPACE NFPA 101, SECTION A.6.2.1 (APPENDIX A)ASSEMBLY OCCUPANCY: SPECIAL BUSINESS TENANT OCCUPANCY. FROM ANY POINT IN A BUILDING OR STRUCTURE TO PUBLIC WAY CONSISTING OF NFPA 101 7.2.1.5.9.2 THE RELEASING MECHANISM "SHALL OPEN DOOR WITH NOT MORE THAN 7.2.1.5.9 A LATCH OR OTHER FASTENING DEVICE ON DOOR SHALL BE PROVIDED WITH 7.2.1.2 EVERY DOOR AND PRINCIPAL ENTRANCE THAT IS REQUIRED TO SERVE CONTROL OF, THE MANAGEMENT OF OTHER OCCUPANCIES , SUCH AS OFFICES, FALL CONFERENCE ROOMS, SNACK AREAS, AND OTHER AREAS INCIDENTAL TO, UNDER ONE RELEASING OPERATION." 3.3.136* MEANS OF EGRESS - A CONTINUOUS AND UNOBSTRUCTED WAY TRAVEL THERETO. THE OTHER OCCUPANCY AND SHOULD BE SUBJECT TO PROVISIONS APPLICABLE AND INCIDENTAL TO SUCH OTHER OCCUPANCY, SHOULD BE CLASSIFIED AS PART OF "READILY OPERATED" UNDER ALL LIGHTING CONDITIONS. A RELEASING DEVICE THAT HAS AN "OBVIOUS METHOD OF OPERATION" AND IS AS AN EXIT ARE TO BE CONSIDERED PART OF THE ACCESS. THE EXIT DISCHARGE. THREE SEPARATE AND DISTINCT PARTS: (1) THE EXIT ACCESS, (2) EXIT, (3) SPACE FOR ASSEMBLY PURPOSE BY FEWER THAN 50 PERSON IN ANOTHER OCCUPANCY, THE MEETING/TRAINING ROOMS ARE USED ONLY FOR ASSEMBLY OF SINGLE THE INTENT OF PROPOSED DESIGN FALLS UNDER THIS REQUIREMENT. FEMA-FIRM MAP LOCATION MAP 1001 MacArthur Causeway Miami, Fl, 33132 Watson Island FLOOD PLAIN ELEVATION DATA LIFE SAFETY DOOR NOTES: FLOOD ZONE: AE; PANEL NUMBER: BE MADE TO EXISTING FACADES OF BUILDING. ZONING COMPLIANCE THIS IS AN INTERIOR RENOVATION ONLY. NO ALTERATIONS WILL 1. 5. 4. 3. 2. DRAWING INDEX SHEET ARCHITECTURAL PLUMBING: MECHANICAL: ENGINEERING P-1.1 P-0.1 E-1.1 E-0.2 E-0.1 ELECTRICAL: D-1 M-1.1 M-0.1 A-6.1 A-5.1 A-4.1 A-3.1 A-2.3 A-2.2 A-2.1 A-1.2 A-1.1 A-0.0 DOOR SHALL SWING WITH EGRESS WHEN OCCUPANT LOAD IS 50 'N' DENOTE NEW 'E' DENOTE EXISTING 'PH' DENOTE PANIC HARDWARE ONE POCKET DOOR, FOR MORE INFORMATION OR MORE PERSONS ALL DOORS SHALL BE SWING TYPE REFER TO DOOR SCHED. DRAWING TITLE PLUMBING SECOND FLOOR PLAN LEGEND AND DETAILS PLUMBING GENERAL NOTES, SYMBOL, LEGEND AND DETAILS ELECTRICAL SECOND FLOOR PLAN ELECTRICAL PANEL SCHEDULE, CALCULATIONS, ELECTRICAL GENERAL NOTES, SYMBOL, LEGEND INTERIOR ELEVATIONS & DETAILS FINISH PLAN & SCHEDULE ELECTRICAL LOCATION PLAN REFLECTED CEILING PLAN & NOTES FIRE PENETRATIONS DETAILS DOOR SCHEDULE & ELEVATIONS DEMOLITION PLAN MECHANICAL SECOND FLOOR PLAN MECHANICAL GENERAL NOTES, SYMBOL, GENERAL NOTES CONSTRUCTION PLAN & NOTES COVER SHEET/LIFE SAFETY PLAN AND RISERS WALL SECTIONS & DETAILS 12086C0316L

AND NGVD: 09 FEET

N O T E : C O N T R A C T O R S H A L L C H E C K A N D V E R I F Y A L L P L A N D I M E N S I O N S A N D C O N D I T I O N S B E F O R E P R O C E E D I N G W I T H C O N S T R U C T I O N A N D S H A L L N O T I F Y G - S T U D I O O F A N Y D I S C R E P A N C I E S . D O N O T S C A L E D R A W I N G S . A L L W R I T T E N D I M E N S I O N S S H A L L G O V E R N . D R A W I N G S / E L E C T R O N I C M E D I A A R E T H E P R O P E R T Y O F D E S I G N E R / G - S T U D I O A N D S H A L L N O T B E U S E D W I T H O U T E X P R E S S E D W R I T T E N C O N S E N T . SHEET NO. checked by: drawn by: release date: scale: 1428 Brickell Ave, Suite 202 City of Miami Police Department Llc# AA-26001740 A-00 +1 (305) 371 8400 Marine Patrol Office Miami, FL 33131

Watson Island 1 1001 MacArthur Causeway 03/14/2016 March 14, 2016 Miami, Fl, 33132 as shown cv/ga as/pp COVER SHEET, PROJECT DESCRIPTION & LIFE SAFETY PLAN FRONT APPROACHES-SWING DOORS CONSULT CURRENT UNDERWRITERS LABORATORIES, INC. "FIRE RESISTANCE DIRECTORY" FOR DETAILS. NOTE: MANUEVERING CLEARANCE OF 6" SHALL BE PROVIDED AS SHOWN CONCRETE FLOOR NOTE: X= 12" IF DOOR HAS BOTH F. A. C. 2010 MANEUVERING CLEARANCES FOR WHEELCHAIRS FLORIDA ACCESSIBILITY CODE 2010 MIN. CLR. FLOOR SPACE FOR WHEELCHAIRS THRU 1 OR 2 HR. GYP. BD. WALL MANEUVERING CLEARANCES AT DOORS PENETRATION OF PIPE/CONDUIT - UL SYSTEM #: WL1003 X THRU 1,2,3,OR 4 HOUR FLOOR PENETRATION OF PIPE/CONDUIT - UL SYSTEM #: CAJ1044 48" CONSULT CURRENT UNDERWRITERS LABORATORIES "FIRE RESISTANCE DIRECTORY" FOR DETAILS IF X > 24" THEN AN ADDITIONAL CLEAR FLOOR SPACE A CLOSER AND LATCH 60" MIN 30" 1 OR 2 HOUR FIRE RATED GYPSUM WALLBOARD ASSEMBLY

48" MIN. NOTE: X 24" ADDITIONAL MANEUVERING CLEARANCES FOR ALCOVES METAL PIPE 30" (A) 30" (A) X STEEL SLEEVE 48" STEEL PIPE CLEAR FLOOR SPACE IN ALCOVES PUSH SIDE 18" MIN 6" PULL SIDE

24" PREFERED X

(E) (D) 30" HINGE SIDE APPROACH-SWINGING DOORS PULL SIDE NOTE: Y= 48" MIN. IF DOOR HAS PUSH SIDE X PROVIDED AS SHOWN NOTE: CLEARANCE OF 12" SHALL BE ADDITIONAL MANUEVERING FORWARD APPROACH

NOTE: X 15" 48" IF X > 15" THEN AN BOTH A CLOSER AND LATCH NOTE: X= 36" MIN. IF Y= 60" UL SYSTEMS CAJ1044 UL SYSTEM WL1003 48" 48" (B) 30"

Y X= 42" MIN. IF Y= 54" 42" MIN (B) 12" X X 54" MIN

Y 30" MINERAL WOOL PACKING PARALLEL APPROACH NOTE: LATCH SIDE APPROACHES - SWINGING DOORS COMPLY WITH THE CLEARANCES FOR FRONT APPROACHES PULL SIDE PUSH SIDE 3M FIRE BARRIER CP 25WB+ CAULK STEEL SLEEVE (OPTIONAL) MINERAL WOOL PACKING ALL DOORS IN ALCOVES SHALL 48" (C) 3M FIRE BARRIER CP 25WB+ CAULK NOTE: Y= 48" MIN. IF DOOR HAS NOTE: Y= 54" MIN. IF DOOR HAS 24" MIN

Y A CLOSER A CLOSER 48" MIN (C) X NOT TO SCALE NOT TO SCALE NOT TO SCALE NOT TO SCALE X 24" MIN Y 42" MIN SYMBOLS: CL CAB BW BTW BS BRK BRG BC BLDG ALT AFF ADJ ABBREVIATIONS CJ GLS FURN FR FOW FOS FOP FOM FOC FOB FO FLUOR FLR FIN FF FEC FE (F) E.T.R. EQUIP EQ EL EA (E) DWR DWG DTL DR DN DIM DIA, DF DEMO DBL CTR CONTR CONST CONC COL CLR CLKG CLG GYP GWB ROOM NUMBER ROOM NAME ALIGN (R) (E) FE # # CABINET 0.00 CABINET BOTH WAYS BETWEEN BOTH SIDES BRICK BEARING BELOW CEILING BUILDING ALTERNATE ABOVE FINISHED FLOOR ADJACENT FRAME FACE OF WALL FACE OF STUD FACE OF PANEL FACE OF MASONRY FACE OF CONCRETE FACE OF BRICK FINISH OPENING FLUORESCENT FLOOR/FLOORING FINISH FINISHED FLOOR/ FACE FIRE EXTINGUISHER FIRE EXTINGUISHER FUTURE EXISTING TO REMAIN EQUIPMENT EQUAL CONSTRUCTION JOINT GLASS FURNITURE ELEVATION EACH EXISTING DRAWER DRAWING DETAIL CENTER LINE DOOR DOWN DIMENSION DIAMETER DRINKING FOUNTAIN DEMOLISH/DEMOLITION DOUBLE CENTER CONTRACTOR/CONTRACT CONSTRUCTION CONCRETE COLUMN CLEAR CAULKING CEILING GYPSUM GYPSUM WALL BOARD FLOOR HEIGHT FIRE EXTINGUISHERS CEILING HEIGHT DENOTES RELOCATED DENOTES EXISTING ROOM/FLOOR INDICATOR SECTION SURFACES ALIGN FINISHED INTERIOR ELEVATION KEYED NOTE TYP TS TME TH TEL TBD SYST STD SIM SCHED RO REV REFR RECEP REC RCP RB PERP P LAM PB OPP OFOI OFCI NTS NRC NIC N/A MTD MISC MIR MIN MFR MECH MDF MAX MAT LT INSUL HW HVAC HT HORIZ HDWR UON WKSF W/O W/ VIF VERT VENT VCT VAR 1/2" TYPICAL TUBE STEEL TO MATCH EXISTING THICKNESS TELEPHONE TO BE DETERMINED SYSTEM(S) STANDARD SIMILAR SCHEDULED ROUGH OPENING/ROUGH REVISION REFRIGERATOR RECEPTACLE RECESSED REFLECTED CEILING PLAN RUBBER BASE OWNER INSTALLED CONTRACTOR INSTALLED PERPENDICULAR PLASTIC LAMINATE PANIC BAR OPPOSITE OWNER FURNISHED, OWNER FURNISHED, NOT TO SCALE MANUFACTURER MECHANICAL MEDIUM DENSITY FIREBOARD MAXIMUM MATERIAL LIGHT INSULATION COEFFICIENT NOISE REDUCTION NOT IN CONTRACT NOT APPLICABLE MOUNTED MISCELLANEOUS MIRROR MINIMUM HOT WATER AIR CONDITIONING HEATING, VENTILATING, HEIGHT HORIZONTAL HARDWARE UNLESS OTHERWISE WORKSURFACE WITHOUT WITH VERIFY IN FIELD VERTICAL VENTILATOR/VENTILATION VINYL COMPOSITION TILE VARIES NOTED REVISIONS NORTH ARROW FLOOR TRANSITION GENERAL NOTES: MILLWORK NOTES: 19. 18. 17. 16. 15. 14. 13. 12. 11. 10. 1. 7. 6. 9. 5. 28. 27. 26. 25. 24. 23. 22. 21. 20. 8. 4. 3. 2. 12. 11. 10. 1. NOTE: CONTRACTOR SHALL PROVIDE SHOP DRAWINGS FOR ALL MILLWORK ITEMS IN THIS JOB, 7. 6. 9. 5. AND SHALL BE APPROVED BY G. ALVAREZ STUDIO, INC. 8. 4. 3. 2. FURNITURE AND ALL LOW VOLTAGE (ALARM, SECURITY, LOCAL ACCESS, DATA, REQUESTED THAT ARE LESS THAN THOSE PROVIDE BY LANDLORD. EXPENSE OF TENANT. NO EXCHANGES OR CREDITS ARE GIVEN FOR QUANTITIES PROVIDER OF THE ITEMS, ARE AT SOLE DISCRETION LANDLORD. DEMOLITION AND CONSTRUCTION. LOCATION AS PER DRAWING OR DIRECTED BY THE FIELD FIRE INSPECTOR. REQUIRED BY THE LOCAL MUNICIPALITY. REGISTERED PROFESSIONAL ENGINEER AND SHALL BE SIGNED SEALED AS FLAME SPREAD AND SMOKE GENERATION. BACK. RESPONSIBLE FOR THE IMPLEMENTATION OF SUCH. EQUAL EMPLOYMENT OPPORTUNITY COMMISSION AND THE U.S. DEPARTMENT OF FOURTH IN THE AMERICANS WITH DISABILITIES ACT HANDBOOK, AS PUBLISHED BY REFER TO ENGINEERING DOCUMENTS FOR ALL ELECTRICAL, TELEPHONE, PANELING AND WALL HUNG CABINETRY. DEBRIS GENERATED FROM THE DEMOLITION AND CONSTRUCTION BY MEANS OF DURING THE COURSE OF WORK SHALL BE REPAIRED TO MATCH EXISTING IN KIND FURNISH ALL REQUIRED MATERIALS AND LABOR NECESSARY TO ENSURE A COMPLETE PLUMBING AND OTHER HOOKUPS TO BOTH CONTRACTOR FURNISHED INSTALLED NOTED OTHERWISE. CONTRACTOR SHALL FURNISH MECHANICAL, ELECTRICAL, EXPENSE. IDENTIFIED BY TENANT PRIOR THE COMMENCEMENT OF CONSTRUCTION. INDICATED. INSTALLATION OF TENANT-FURNISHED CONTRACTOR-INSTALLED ITEMS. ITEMS, TENANT-FURNISHED CONTRACTOR-INSTALLED ITEMS AND TENANT FURNISHED INFORMATION CONTAINED IN THESE DRAWINGS IS BASED ON PARTIAL FIELD G. ALVAREZ STUDIO IMMEDIATELY SHOULD EXISTING CONDITIONS PROHIBIT EXECUTION CONTRACTOR SHALL COORDINATE WITH OWNER ALL CORE DRILLING. WITH NFPA 101, SEC. 521.5. MILLWORK LOCATIONS, WITH WOOD BLOCKING AS REQUIRED FOR LOAD. TYP. CONTRACTOR SHALL PROVIDE 20 GA. METAL STUDS, 16" O.C. AT ANY WALL HUNG CODES. CONTRACTORS SHALL MAINTAIN THE INTEGRITY OF FIRE ENVELOPE DURING CONTRACTOR SHALL PROVIDE (1) 2A-40BC FIRE EXTINGUISHER FOR EVERY 2,500 S.F. CONTRACTOR SHALL PATCH AND REPAIR ALL AREAS AFFECTED BY THE WORK. WHICHEVER GOVERNS. CONTRACTOR SHALL PROVIDE FOR A LIVE LOAD OF 5 POUNDS PER SQUARE FOOT MANUFACTURERS SPECIFICATIONS, THE GYPSUM ASSOCIATION STANDARDS. CONTRACTOR SHALL INSTALL THESE ASSEMBLIES IN ACCORDANCE WITH THE CONTRACTOR SHALL PROVIDE G. ALVAREZ STUDIO WITH SHOP DRAWINGS AND FINISH MECHANICAL, STRUCTURAL, PLUMBING, AND FIRE SPRINKLER REQUIREMENTS. CONSTITUTE ACCEPTANCE OF SURFACES BY EACH SPECIFIC SUBCONTRACTOR AND CONTRACTOR SHALL BE RESPONSIBLE FOR RESTRICTING AND CONTAINING DUST OF FINISH. MANNER ANY EXISTING FINISHES DISTURBED OR DAMAGED BY THE CONTRACTOR CONTRACTOR SHALL BE RESPONSIBLE FOR COORDINATING FLOOR FINISH MATERIALS CONTRACTOR SHALL FURNISH ALL ITEMS ON THE DRAWINGS UNLESS SPECIFICALLY OF THE DESIGN INTENT DRAWINGS. ANY ADDITIONAL WORK, DEMOLITION MEASUREMENTS. CONTRACTOR SHALL VERIFY ALL DIMENSIONS, AND NOTIFY G. 2305.5 OR THE STANDARD BUILDING CODE (CURRENT EDITION) SECTION 1604, JUSTICE ON OCTOBER 1991. THE CONTRACTOR AND SUBCONTRACTORS SHALL BE ALL FINISH SELECTIONS ( WHETHER BUILDING STANDARD OR ABOVE) SHALL BE ALL ABOVE BUILDING-STANDARD ITEMS PURCHASED BY TENANT SHALL MEET MINIMUM ANY CHANGES, ADDITIONS, DELETIONS OR SUBSTITUTIONS SHALL BE AT THE SOLE ALL SPRINKLER DRAWINGS IF REQUIRED ARE NOT A PART OF THIS CONTRACT. ALL FINISHES SHALL MEET THE REQUIREMENTS OF NFPA 1O1 (2006) SECTION 10.1 FOR ACCORDANCE WITH UNDERWRITERS LABORATORY TEST ASSEMBLY UL 1479. ALL PENETRATION FIRE STOPS FOR METAL PIPE AND INSULATED SHALL BE IN AND MAINTAIN A DEFLECTION OF L/240 PER THE S.F.B.C. (CURRENT EDITION) SECTION ALL WORK SHALL BE IN ACCORDANCE WITH A.D.A. ACCESSIBILITY GUIDELINES AS SET ALL WALLS ARE TO BE PLUMB AND STRAIGHT (RIPPLE FREE). ASSUMPTION OF RESPONSIBILITY FOR ALL SUBSEQUENT FINISHING AND RESULTS ALL CUTTING AND PATCHING SHALL BE PERFORMED IN A NEAT WORKMANLIKE AND IN ACCORDANCE WITH THE DRAWINGS. AND INSTALLED ITEMS UNLESS SPECIFICALLY NOTED OTHERWISE. CONTRACTOR SHALL AND/OR REMOVAL AS A RESULT OF FAILURE TO DO SO WILL BE AT THE CONTRACTORS ALVAREZ STUDIO OF ANY DISCREPANCIES. IN ADDITION, CONTRACTOR SHALL NOTIFY ALL WORK TO BE PERFORMED IN ACCORDANCE WITH CODES AND ORDINANCES. TO X-RAY CONCRETE SLAB PRIOR CORE DRILLING TYP. TELEPHONE, ETC.) BY TENANT.TBD. STATE AND LOCAL CODES. SPECIFICATION ARE INTENDED TO DENOTE QUALITY ONLY; THE MANUFACTURER, OR THROUGHOUT 11. ALL NEW AND EXISTING DOORS IN TENANT SPACE SHALL COMPLY THESE PLANS AND ALL SPECIFICATIONS WITHIN SHALL COMPLY WITH APPLICABLE SPRINKLER CONTRACTOR SHALL PROVIDE SHOP DRAWINGS PRODUCED BY A FLORIDA SURFACES SHALL MATCH EXISTING ADJACENT UNLESS OTHERWISE THERE SHALL BE NO COMMUNICATIONS OF ELECTRICAL BOXES LOCATED BACK TO SAMPLES OF ALL SPECIAL WORK (i.e. CABINETRY, MILLWORK ETC.) FOR APPROVAL. THEREOF. START OF APPLICATION ANY PAINT OR WALL COVERING MATERIALS WILL TREATED WOOD BLOCKING WHERE REQUIRED FOR MILLWORK ITEMS (WOOD THE GENERAL CONTRACTOR SHALL FURNISH AND INSTALL ALL CONCEALED FIRE TEMPORARY PARTITIONS OR BARRIERS AS REQUIRED. TO ENSURE THAT THE TRANSITIONS BETWEEN FLOORING MATERIALS WILL BE SMOOTH P-LAM COUNTERTOPS SHALL HAVE COLOR CORE AT TOP AND NOSING. PLASTIC LAMINATE DOORS SHALL HAVE SCHEDULED P-LAM AT FRONT AND BACK WITH FINISHES: FOR CABINET DOOR, COUNTERTOP AND BACKSPLASH FINISHES SEE ELEVATIONS. DETERMINED ON SHOP DRAWINGS. PROVIDE 2 1/2" DIAMETER GROMMETS PER 5 LIN. FT. OF WORK TOP. LOCATION TO BE BLOCKING TO BE FIREPROOF IN ACCORDANCE WITH MUNICIPAL CODE. (INSTALLED BY INTERIOR SURFACES SHALL BE WHITE MELAMINE OR MATCHING P-LAM SCHEDULED.(WHITE) GRADE; CONSTRUCTION TYPE A (FRAMELESS); DOOR STYLE 1(OVERLAY). CABINETS. MATCHING PVC EDGE BAND AT ALL SIDES. COORDINATED WITH THE ELECTRICAL CONTRACTOR. CABINET CONTRACTOR, CUTOUTS FOR SWITCHES AND WIRING DEVICES SHALL BE WHERE ELECTRICAL WORK IS SPECIFIED, LAMPS AND FIXTURES ARE TO BE PROVIDED BY THE CABINET CONTRACTOR EXCEPT OTHERWISE NOTED). ALL CABINETS SHALL HAVE A FINISHED BASE TO MATCH DOORS; NO RUBBER AT ALL EXPOSED SURFACES SHALL RECEIVED P-LAM AS SCHED. ALL CASEWORK SHALL MEET 'THE ARCHITECTURAL WOODWORK STANDARDS'; PREMIUM ALL DRAWERS TO HAVE FULL EXTENSION SLIDES. ALL MEANS OF FASTENING TO BE CONCEALED. ALL WOOD WORK, BLOCKING, GROUNDS, ROUGH BUCKS, AND MISCELLANEOUS FIRE DEPARTMENT NOTES: 19. 18. 17. 16. 15. 14. 13. 12. 1. 7. 6. 13. 12. 11. 10. 1. 5. 20. 8. 3. 2. 4. 7. 6. 9. 5. 3. ADDITIONAL NOTES: WIRE REMOVAL 8. 4. 2. REMOVED CABLE IN PLASTIC BAGS. FOLLOW SAFETY PRECAUTIONS WHEN REMOVING OLD CABLE. ENSURE NOT BE USABLE IN THE FUTURE. REMOVE ALL CABLES WAY TO ELECTRICAL CODE, REMOVE CABLE THAT IS NOT BEING USED OR WILL REMOVE OLD CABLE. AS PER 2002 REVISIONS TO THE NATIONAL THAT WORKERS WEAR PROPER RESPIRATORY PROTECTION, AND SEAL THE ELECTRICAL PANEL. PROPRIETARY OR REMOTE STATION SERVICE A LOCAL ALARM WHICH WILL GIVE EXTEND OR MODIFY EXlSTING AUTOMATIC FIRE EXTINGUISHING SYSTEM AS REQUIRED NOT MORE THAN 60 FLASHES PER NlNUTE. HEARING IMPAIRED. FLASHING VISUAL WARNING SHALL HAVE A FREQUENCY OF EMERGENCY WARNING SYSTEMS SHALL ACTIVATE A MEANS OF THE LOCATE THE CENTER OF FIRE ALARM INITIATING DEVICES 48" ABOVE LEVEL PRIOR TO INSTAlLATION. EXTEND OR MODIFY EXISTING FIRE/ LIFE SAFETY SYSTEM AS REQUIRED TO PROVIDE FIRE CODE REGULATIONS. FLAMMABLE GAS AND HAZARDOUS SUBSTANCES SHALL COMPLY WITH UNIFORM PROVIDE FIRE DAMPERS OR DOORS WHERE AIR DUCTS PENETRATE FIRE-RATED NON-COMBUSTlBLE OR BE FLAMEPROOFED IN AN APPROVED MANNER. DECORATIONS (CURTAINS, DRAPES, SHADES, HANGINGS, ETC.) SHALL BE END POINT FLAME SPREAD RATING: EXIT DOORS SHALL SWING IN THE DlRECTION OF TRAVEL WHEN SERVlNG 50 OR PROTECTED WITH A SMOKE OR DRAFT STOP ASSEMBLY HAVlNG 20-MINUTE RATING DOORS OPENING INTO REQUIRED 1-HOUR, FIRE-RESISTIVE CORRIDORS SHALL BE EVERY EXIT DOOR SHALL BE OPERABLE FROM THE INSIDE WITHOUT USE OF A KEY EMERGENCY POWER CIRCUITS. COMPLY WlTH BUILDING CODES. DRAWINGS, AND ADDITIONAL SIGNS AS REQUIRED BY BUILDING DEPARTMENT PROVIDE EXIT SIGN WITH 6" LETTERS OVER REQUIRED EXITS, WHERE SHOWN ON FLOOR, AND ADDITIONAL EXTINGUISHERS AS REQUIRED BY FIRE DEPARTMENT FIELD PROVIDE A PORTABLE FIRE EXTINGUISHER WITH RATING OF NOT LESS THAN 2-A INTERIOR WALL AND CElLING FlNISHES FOR EXIT CORRIDOR SHALL NOT EXCEED AN INSPECTOR OR FIRE DEPARTMENT FIELD INSPECTOR. CONNECT EXIT SIGNS TO INSPECTOR OR BUILDING DEPARTMENT INSPECTOR. COMPLETE DESCRIPTION OF SEQUENCE OPERATION, AND OBTAIN APPROVAL CODE REQUIREMENTS. MORE PERSONS AND IN ANY HAZARDOUS AREA. OR ANY SPECIAL KNOWLEDGE EFFORT. LOCKING DEVICES SHALL BE OF MAINTAIN AISLES AT LEAST 44" WIDE PUBLIC AREAS. 1/8" IN 10' MAX. SLOPE. CONTRACTOR SHALL NOTIFY THE ARCHITECT HIS INTENDED WOOD BLOCKING SHALL BE FIRE TREATED IN ACCORDANCE WITH APPLICABLE WALLS OR CElLINGS. WITHIN 75 FOOT TRAVEL DISTANCE TO ALL PORTIONS OF THE BUILDING ON EACH AN AUDIBLE SIGNAL AT A CONSTANTLY ATTENDED LOCATION. AUTOMATIC SPRINKLER SYSTEMS SHALL BE SUPERVISED BY AN APPROVED CENTRAL, AN APPROVED FlRE/ LIFE SAFETY SYSTEM. SUBMIT PLANS TO FIRE DEPARTMENT WITH 20-MINUTE DOOR JAMBS TO BE TIGHT-FITTING, SMOKE AND DRAFT AND SHALL BE SELF-CLOSING. AN APPROVED TYPE. ALL NEW DOORS SHALL HAVE LEVER HANDLES. TO FIRE DEPARTMENT AND OBTAIN APPROVAL PRIOR INSTALLATION. TO PROVIDE AN APPROVED AUTOMATIC FIRE EXTINGUISHING SYSTEM. SUBMIT PLANS THE FLOOR, WORKING PLATFORM, GROUND SURFACE OR SIDEWALK. STORAGE, DISPENSING OR USE OF ANY FLAMMABLE COMBUSTIBLE LIQUIDS, POINT IN ALL DIRECTIONS WITH LATICRETE OR OTHER APPROVED METHOD AT A RATE OF LAYING OUT AND FRAMING. LOUNGE ROOMS, JANITOR'S CLOSET AND BATHROOMS. UNDER THIS CONTRACT/PERMIT. BUILDING CORRIDORS AND BASE PERIMETER WALL PARTITIONS/INSUL. NOT DOORS BY CHICAGO METALLIC OR EQUAL. DISCREPANCIES IN SITE CONDITIONS TO G. ALVAREZ STUDIO. DETAILS, ETC. DURING LAYOUT/CHALKING PHASE AND REPORT ANY ALL PERPENDICULAR PARTITION. IF ANY CONFLICTS WITH DEVICES , CLOSER'S CLEARANCES, PROVIDE IN-WALL FIRE RETARDANT BLOCKING AT WALL HUNG MILLWORK, LOCATED IN CEILING PLENUMS SHALL BE FIRE-RETARDANT TREATED. REPRESENTED. BASE BUILDING CONDITIONS AUTOCAD PLANS FORWARDED TO G. ALVAREZ STUDIO BY IF ACCESS DOORS REQ. IN DRYWALL CLG., USE GLASS REINFORCED GYP. G.C. TO USE GREENBOARD OR DUROCK AT ALL WET LOCATIONS SUCH AS BREAK/ GC TO INSPECT EXISTING CONCRETE SLAB FOR UNEVEN SURFACES. HIGH AND LOW G.C. TO REFER ALL ARCHITECTURAL AND MEP DRAWINGS AS WELL ELEVATIONS, GOVERNMENTAL AGENCIES HAVING JURISDICTION AND SHALL CONFORM TO ALL CITY, GC TO VERIFY BASE BUILDING AS BUILT CONDITIONS PRIOR PRECEDING WITH WORK OWNER'S ARCHITECT. G. ALVAREZ STUDIO MAKES NO CLAIM AS TO THE ACCURACY OF METHOD BEFORE PROCEEDING WITH THE WORK. CONDITION NOT NECESSARILY LEVEL. MOUNTED FURNISHINGS, WALL SHELVING, LIGHT FIXTURES, COUNTY, STATE AND FEDERAL CONSTRUCTION, SAFETY SANITARY LAWS, CODES, WORK TO BE PERFORMED IN ACCORDANCE WITH THE RULES AND REGULATIONS OF THE MOST INCONSPICUOUS MANNER BY SLOPING FROM HIGHEST TO LOWEST ALL DIMENSIONS ARE TO FINISH FACE, GC. BACK OUT THICKNESS OF FINISHES IN AMONG OTHER POSSIBLE PROBLEMS, REPORT TO G. ALVAREZ STUDIO. TYPICAL DOOR ROUGH OPENING ON HINGE SIDE IS TO BE 4" FROM FACE OF AND MARKER BOARDS AS REQUIRED FOR RIGID SUPPORT. ALL LUMBER, WOOD GROUNDS, NAILERS AND BLOCKING CONCEALED IN WALLS OR THOSE SHOWN OR INFERRED ON THE DRAWINGS. AND IMMEDIATELY NOTIFY G. ALVAREZ STUDIO OF ANY CONDITIONS CONTRARY TO THE BASE BUILDING CORE, PERIMETER AND TENANT DEMISING WALL CONDITIONS SPOTS DETERMINED PRIOR TO STONE INSTALLATION. INSTALL IN A FLAT STATUES AND ORDINANCES. x x x INSTALLED IN ANY OTHER LOCATION. IN HORIZONTAL EXITS. CLASS III, FLAME SPREAD 76-200, SMOKE DENSITY 450, FOR MATERIALS CLASS II, FLAME SPREAD 26-75, SMOKE DENSITY 300, FOR MATERIALS INSTALLED CLASS I, FLAME SPREAD 0-25, SMOKE DENSITY 150, FOR MATERIALS INSTALLED IN VERTICAL EXITS. CONTROLLED. PRODUCT SUBMITTAL WILL BE DEEMED INVALID AND NOT ACCEPTED BY G. ALVAREZ STUDIO. GENERAL CONTRACTOR PRIOR TO SUBMIT ARCHITECT. OTHERWISE THE SHOP-DRAWING AND/OR ALL SHOP-DRAWINGS AND PRODUCT SUBMITTAL SHALL BE REVIEWED APPROVED BY THE 19. 18. 17. 16. 15. 14. 13. 12. 11. 10. 1. 7. 6. 9. 5. 27. 26. 25. 24. 23. 22. 21. 20. 8. 4. 3. 2. DISABLED ACCESS NOTES: 1/2" IN HEIGHT. LEVEL CHANGES NOT EXCEEDING 1/4" MAY BE VERTICAL. BEVEL HAND AND SHALL NOT REQUIRE TIGHT GRASPING, PINCHING OR TWISTING OF THE FAUCET CONTROLS AND OPERATING MECHANISMS SHALL BE OPERABLE WITH ONE EXTENDING A MINIMUM OF 30" IN WIDTH WITH 8" WIDTH, AND SHALL BE BOTTOM OF THE APRON. PROVIDE KNEE CLEARANCE UNDER FRONT LIP FORWARD APPROACH. PROVIDE A CLEAR FLOOR SPACE 30" X 48" IN FRONT OF LAVATORY TO PERMIT PROVIDE GRAB BARS ON EACH SIDE, OR ONE SIDE AND BACK OF WATER CLOSET. ENTRY TO SANITARY FACILITIES: BEVELED WITH A SLOPE NO GREATER THAN 1:2. FLOORS OR LANDINGS SHALL BE NOT MORE THAN 1/2" LOWER THE DIRECTION OF DOOR SWING 44" AS MEASURED AT RIGHT ANGLES TO THE PLANE PEDESTRIAN WAYS. EVERY REQUIRED ENTRANCE OR PASSAGE DOORWAY SHALL BE NOT LESS THAN 3' IN DOORS. PROVIDE A 10" HIGH SMOOTH PANEL ON THE PUSH SIDE OF NARROW FRAME REQUIRED FIRE DOORS MAY BE INCREASED NOT TO EXCEED 15 POUNDS. FOLDING DOORS. CORRESPONDING DEVICES OR AUTOMATIC DOOR OPERATORS POUNDS FOR EXTERIOR DOORS AND 5 INTERIOR DOORS, MEASURED DESIGNED TO PROVIDE PASSAGE WITHOUT REQUIRING THE ABILITY GRASP HARDWARE, PANIC BARS, PUSH-PULL ACTIVATING OR OTHER HARDWARE LATCHING AND LOCKING DOORS THAT ARE HAND ACTIVATED WHICH IN EVERY CORRIDOR AND AISLE SERVING AN OCCUPANT LOAD OF 10 OR MORE FLOOR SURFACES SHALL BE SLIP-RESISTANT. ELEVATORS OR SPECIAL ACCESS LIFTS. LEVEL THROUGHOUT, OR SHALL BE CONNECTED BY PEDESTRIAN RAMPS, PASSENGER INSULATE OR OTHERWISE COVER HOT WATER AND DRAIN PIPES UNDER LAVATORIES. IDENTIFY ACCESSIBLE ENTRANCES WITH AT LEAST ONE STANDARD SIGN AND IN BUILDINGS AND FACILITIES, FLOORS OF A GIVEN STORY SHALL BE COMMON MECHANISMS ARE EXAMPLES OF ACCEPTABLE DESIGNS. SELF CLOSING WRIST. THE FORCE REQUIRED TO ACTIVATE CONTROLS SHALL BE NO GREATER THAN OF THE LAVATORY. MINIMUM OF 9" HIGH FROM THE FLOOR A 17" DEEP FRONT MOUNT LAVATORIES WITH A MINIMUM CLEARANCE OF 29" FROM THE FLOOR TO OTHER SURFACE. MOUNT FLUSH VALVE CONTROL NO MORE THAN 44" ABOVE THE FLOOR, ON OR WORKING PLATFORM. CENTER ELECTRICAL RECEPTACLE OUTLETS NOT LESS THAN 15" ABOVE THE FLOOR OF THE STEP OR LANDING. STRIP SHALL BE A MATERIAL THAT IS AT LEAST AS OF THE DOOR IN ITS CLOSED POSITION. WHERE A PAIR OF DOORS IS UTILIZED, AT LEAST ONE THE SHALL PROVIDE OF THE DOORWAY IS NOT LESS THAN 32". OPENING AT LEAST 90 DEGREES AND SHALL BE SO MOUNTED THAT THE CLEAR WIDTH WIDTH AND NOT LESS THAN 6'-8" IN HEIGHT. DOORS SHALL BE CAPABLE OF WHEELCHAIR FOOTREST WITHOUT CREATING A TRAP OR HAZARDOUS CONDITION. MAY BE UTILIZED TO MEET THE ABOVE STANDARDS. MAXIMUM EFFORT OPERATE MAXIMUM PULL OR PUSH EFFORT TO OPERATE DOORS SHALL NOT EXCEED 8.5 CENTER HAND ACTIVATED DOOR OPENING HARDWARE BETWEEN 30" AND 44" OPENING HARDWARE. MOUNT DOOR HARDWARE BETWEEN 30" AND 44" OTHERS WITH A SLOPE NO GREATER THAN 1:2 5 POUNDS. LEVER OPERATED, PUSH TYPE AND ELECTRONICALLY CONTROLLED ALLOWED IF THE FAUCET REMAINS OPEN FOR AT LEAST 10 SECONDS. ACCESSIBLE TO THE PHYSICALLY HANDICAPPED. AT LEAST 2" WIDE, PLACED PARALLEL TO AND NOT MORE THAN 1" FROM THE NOSE ADDITIONAL DIRECTIONAL SIGNS, AS REQUIRED, VISIBLE FROM APPROACHING ANGLE OF 90 DEGREES FROM ITS CLOSED POSITION. A CLEAR, UNOBSTRUCTED OPENING WIDTH OF 32" WITH THE LEAF POSITIONED AT AN AT RIGHT ANGLES TO HINGED DOORS AND CENTER PLANE OF SLIDING OR ABOVE THE FLOOR. ABOVE FLOOR FINISH. A PATH OF TRAVEL SHALL BE OPERABLE WITH SINGLE EFFORT BY LEVER TYPE ABRUPT CHANGES IN LEVEL ALONG ANY ACCESSIBLE ROUTE SHALL NOT EXCEED THERE SHALL BE NO SHARP OR ABRASIVE SURFACES UNDER LAVATORIES. SIDE OF THE TOILET WITH GREATEST SEPARATION FROM ADJACENT WALL OR THE HEIGHT OF WATER CLOSET (TOP SEAT) SHALL BE BETWEEN 17" AND 19". SINGLE ACCOMMODATION TOILET FACILITY: TOILET ROOM ACCESSORIES: SANITARY FACILITIES LOCATED ON AN ACCESSIBLE FLOOR OF A BUILDING SHALL BE SLIP RESISTANT AS THE OTHER TREADS OF STAIR. TREAD OF EACH INTERIOR STAIR WITH A STRIP CLEARLY CONTRASTING COLOR TO ALERT THE VISUALLY IMPAIRED, MARK UPPER APPROACH AND LOWER THRESHOLD OF THE DOORWAY. CHANGE IN LEVEL BETWEEN 1/4" AND 1/2" SHALL BE THE DIRECTION OF DOOR SWING AT LEAST 60" AND LENGTH OPPOSITE SHALL BE LEVEL AND CLEAR. THE CLEAR AREA HAVE A LENGTH IN THE FLOOR OR LANDING ON EACH SIDE OF AN ENTRANCE PASSAGE DOOR SMOOTH UNINTERRUPTED SURFACE TO ALLOW THE DOOR BE OPENED BY A THE BOTTOM 10" OF ALL DOORS (EXCEPT SLIDING AND AUTOMATIC) SHALL HAVE A SHALL BE NOT LESS THAN 44" IN WIDTH. h. b. b. b. b. g. e. d. c. a. c. a. c. a. c. a. f. EDGES SHALL HAVE A MINIMUM RADIUS OF 1/8". ETC.) SHALL SUPPORT A 250 POUND LOAD. PROVIDE 1-1/2" CLEARANCE BETWEEN GRAB BARS AND WALL. DIAMETER OF GRAB BARS TO BE 1-1/4" 1-1/2". FROM THE FLOOR. FLOOR. FROM APPROACH. DOORWAYS TO HAVE A 32" CLEAR OPENING. GRAB BARS AND ANY ADJACENT SURFACE SHALL BE FREE OF SHARP OR GRAB BARS SHALL NOT ROTATE WITHIN THEIR FITTINGS. GRAB BARS (INCLUDING CONNECTORS, FASTENERS, SUPPORT BACKING, GRAB BARS TO BE 33" ABOVE AND PARALLEL THE FLOOR. MINIMUM CLEAR SPACE IN FRONT OF WATER CLOSET TO BE 48". MOUNT DISPENSING AND DISPOSAL FIXTURES (TOWEL, SANITARY NAPKINS, MOUNT TOILET TISSUE DISPENSERS WITHIN 12" FROM THE FRONT EDGE OF MOUNT BOTTOM EDGE OF MIRRORS NO HIGHER THAN 40" FROM THE ON APPROACH SIDE, PROVIDE A 60" CLEAR LEVEL SPACE WHEN DOOR WATER CLOSET TO HAVE A 28" CLEARANCE FROM FIXTURE AND 32" WASTE, COIN SLOTS, ETC.) WITH OPERATING PARTS NO HIGHER THAN 40" ABRASIVE ELEMENTS. ACCESSIBLE TO THE HANDICAPPED. A SPACE 36" X 48" IS PERMITTED IN FRONT OF EXISTING WATER CLOSET A WALL. TOILET SEAT. 44" CLEAR AISLES OR CORRIDORS WHERE OCCUPANT LOAD IS 10 MORE. STOOL. GRAB BAR AT BACK TO BE 36" LONG. SIDE BARS TO BE 42" LONG AND PROJECT 24" IN FRONT OF WATER CLOSET SWINGS TOWARD APPROACH AND 44" SPACE WHEN DOOR AWAY

A-1.1 City of Miami Police Department +1 (305) 371 8400 Marine Patrol Office Miami, FL 33131

Watson Island 1 1001 MacArthur Causeway 03/14/2016 March 14, 2016 Miami, Fl, 33132 as shown cv/ga as/pp GENERAL NOTES N O T E : C O N T R A C T O R S H A L L C H E C K A N D V E R I F Y A L L P L A N D I M E N S I O N S A N D C O N D I T I O N S B E F O R E P R O C E E D I N G W I T H C O N S T R U C T I O N A N D S H A L L N O T I F Y G - S T U D I O O F A N Y D I S C R E P A N C I E S . D O N O T S C A L E D R A W I N G S . A L L W R I T T E N D I M E N S I O N S S H A L L G O V E R N . D R A W I N G S / E L E C T R O N I C M E D I A A R E T H E P R O P E R T Y O F D E S I G N E R / G - S T U D I O A N D S H A L L N O T B E U S E D W I T H O U T E X P R E S S E D W R I T T E N C O N S E N T . SHEET NO. checked by: drawn by: release date: scale: 1428 Brickell Ave, Suite 202 Llc# AA-26001740

A-1.2 City of Miami Police Department +1 (305) 371 8400 Marine Patrol Office Miami, FL 33131

Watson Island 1 1001 MacArthur Causeway 03/14/2016 March 14, 2016 Miami, Fl, 33132 as shown cv/ga as/pp FIRE PENETRATION DETAILS 19. IF HAZARDOUS MATERIALS ARE ENCOUNTERED DURING DEMOLITION OPERATIONS, COMPLY WITH 18. CONTRACTOR SHALL PRACTICE ALL PRACTICAL CARE TO PROVIDE DUST AND NOISE CONTROL 17. CONTRACTOR SHALL COORDINATE TO ENSURE UTILITY SYSTEMS REMAIN IN OPERATION AS NEEDED 16. CONTRACTOR SHALL COORDINATE WORK WITH OTHER TRADES AND PROTECT THE 15. ALL EXISTING A/C DUCTWORK, DIFFUSERS (RETURN/SUPPLY) AIR DISTRIBUTION CONTRACTOR SHALL 14. ALL CEILING FIRE ALARM DEVICES (SPEAKERS, SMOKE DETECTORS) SHALL REMAIN, CONNECTED 13. CONTRACTOR SHALL VISIT AND INSPECT THE SITE PRIOR TO BID. 12. ALL ITEMS OF SALVAGEABLE VALUE, AS DETERMINED BY THE OWNER, SHALL BE CAREFULLY 11. CONTRACTOR SHALL LOCATE, IDENTIFY, STUB-OFF AND DISCONNECT UTILITY SERVICES THAT ARE 10. CONTRACTOR SHALL REMOVE AS INDICATED FINISH PLAN, SURFACE BE PREPARED TO 1. INTERIOR PARTITIONS SHALL BE REMOVED AND DISPOSED AS INDICATED ON THIS PLAN. (UNLESS OTHERWISE NOTED) EXTINGUISHERS IN IMPACTED AREA SHALL BE STORED FOR REUSE TENANT SPACE. DRAWINGS FOR ADDITIONAL INFORMATION) UNLESS OTHERWISE NOTED SHALL REMAIN AND OR BE REUSED/RELOCATED. (REFER TO ENGINEERING BEYOND LIMITS OF NEW WORK THAT IS DAMAGED OR ALTERED DURING THE EXECUTION EXISTING MATERIALS AND FINISHES. PLASTERED AND MADE READY TO RECEIVE NEW FINISHES OR MATCH ALIGN WITH ALL REQUIRED TO PREPARE THE PREMISES FOR NEW WORK AND ALTERED WORK. BUILDING MANAGER AT A PRE-CONSTRUCTION MEETING. EXISTING STRUCTURAL, MECHANICAL AND ELECTRICAL CONDITIONS INVOLVED IN THIS CONTRACT. DESCRIBED IN THE DRAWINGS FOR A COMPLETE INSTALLATION REGARDLESS OF WHERE OR HOW IT IS PROTECTION AGAINST EXPOSURE OR ENVIRONMENTAL POLLUTION. PROTECTION. PROTECTION. COMPLY WITH GOVERNING REGULATIONS PERTAINING TO ENVIRONMENTAL DEMOLITION. BUILDING STRUCTURE AND ALL EXISTING MATERIAL EQUIPMENT NOT SCHEDULED FOR REMAIN. (REFER TO ENGINEERING DRAWINGS FOR ADDITIONAL INFORMATION) BUILDING MANAGER. REMOVED, CLEANED, STORED AND TURNED OVER TO THE BUILDING MANAGER, CONTRACTOR PLUG WATER LINES AT SOURCE. (ONLY IF SO DENOTED) NOT INDICATED TO REMAIN. FILL SLAB WITH SAME FIRE RATED INTEGRITY. REMOVE ALL ELECTRICAL RECEIVE NEW FINISHES. REQUIRED BY WORK, CONTRACTOR TO PROVIDE DUST CONTROL MEASURES. PRIOR TO REMOVAL. PREPARED FOR NEW CONSTRUCTION. DISMANTLE, REMOVE & SALVAGE IN THE DISPOSITION OF DEMOLITION EXISTING SPACE. IN THIS CONTRACT. 7. EXISTING CONDITIONS NOT SHOWN ON THIS PLAN SHALL BE REVIEWED WITH G. ALVAREZ STUDIO 6. UPON COMPLETION OF DEMOLITION, THE ENTIRE AREA SHALL BE CLEANED ALL DEBRIS AND CONTRACTOR SHALL CAP & FILL SLAB/PARTITION WITH SAME FIRE RATED INTEGRITY. CONSTRUCTION. OTHER FLOOR AREAS AND TENANT SPACE CAUSED BY THE NEW CONSTRUCTION. OWNER PRIOR TO PERFORMING ANY WORK. OWNER. CONTRACTOR SHALL OBTAIN WRITTEN PERMISSION FROM THE OCCUPIED SPACE AND CRACKS, WAVES, IMPERFECTIONS AND IRREGULARITIES: ALL SURFACES SHALL BE EITHER PATCHED OR COORDINATE WITH THE BUILDING ENGINEER IN ORDER THAT IT WILL NOT INTERFERE EXISTING METHODS OR PRODUCTS & MATERIAL, MOST EXPENSIVE SOLUTION APPLIES. OBSERVE AND FOLLOW ALL APPLICABLE ORDINANCES CODES. OWNER'S REPRESENTATIVE AND ARCHITECT. OBTAIN A RECEIPT. THESE ITEMS SHALL BE STORED FOR THE BUILDING IN AN AREA DESIGNATED BY WITH UNDERWRITERS LABORATORY TEST ASSEMBLY UL 1479. WIRE, J-BOXES, HOOKUPS, ETC., IN EXISTING PARTITIONS AND TIE-OFF AT SOURCE. REMOVE 9. WHERE EXISTING TILE FLOOR IS TO BE REMOVED, CONTRACTOR SHALL PREPARE SLAB LEVEL & 5. CONTRACTOR SHALL TAKE ALL NECESSARY PRECAUTIONS TO PREVENT DAMAGE EXISTING 39. ALL EXISTING FIRE EXTINGUISHERS SHALL REMAIN, UNLESS IMPACTED BY DEMOLITION. STORE 38. ANY ELECTRICAL & PLUMBING LINES WHICH REQUIRE REMOVAL AND/OR ALTERATION 37. CONTRACTOR SHALL NOTIFY G. ALVAREZ STUDIO GROUP OF ANY EXISTING CONDITIONS NOT 36. CONTRACTOR SHALL MAINTAIN THE INTEGRITY OF FIRE ENVELOPE DURING DEMOLITION AND 35. ALL PENETRATION FIRE-STOPS FOR METAL PIPE AND INSULATED SHALL BE IN ACCORDANCE 34. ALL SPRINKLER HEADS, DOWN LIGHTS, SPEAKERS, SMOKE DETECTORS AND OTHER DEVICES, 33. THE CONTRACTOR IS RESPONSIBLE FOR ALL DAMAGE THAT OCCURS TO EXISTING BUILDING, 32. ALL CONSTRUCTION WORK PERFORMED ON OTHER FLOORS / TENANT SPACES, THE SPACES ARE 31. REPAIR AND RESTORE, TO MATCH ALIGN WITH ALL EXISTING MATERIAL FINISH, WORK 30. ALL EXISTING SURFACES THAT ARE WITHIN THE SCOPE OF NEW WORK SHALL BE EXAMINED FOR 29. FOR ALL DEMOLITION WORK AND REMOVAL OF CONSTRUCTION DEBRIS, THE CONTRACTOR IS TO 28. CONTRACTOR SHALL REMOVE, CUT AND PATCH ALL EXISTING CONSTRUCTION FINISHES AS 27. GENERAL CONTRACTOR SHALL COORDINATE AND ARRANGE USE OF TOILET FACILITIES WITH 26. ALL CONSTRUCTION DELIVERIES ARE TO BE COORDINATED WITH THE BUILDING MANAGEMENT. 25. CONTRACTOR SHALL NOTIFY ARCHITECT OF ANY DISCREPANCIES IN DIMENSIONS THE PLANS 24. CONTRACTOR SHALL INSPECT THE DEMISED BUILDING AREA AND FAMILIARIZE HIMSELF WITH ALL 23. CONTRACTOR TO SUBMIT UNIT PRICES FOR ALL MATERIAL AND LABOR COSTS. 22. THE LATEST VERSION OF GENERAL CONDITIONS CONTRACT FOR CONSTRUCTION BY 21. CONTRACTOR SHALL OBTAIN ALL PERMITS WITH APPLICABLE BUILDING DEPARTMENTS AND 20. CONTRACTOR IS RESPONSIBLE FOR PROVIDING (FURNISHING AND INSTALLING) ALL ITEMS 8. THE CONTRACTOR SHALL PROVIDE ALL NECESSARY BARRICADES AND SAFETY BARRIERS AS 3. EXISTING DOORS, DOOR FRAMES & HARDWARE SHALL BE REMOVED AND STORED FOR REUSE. 2. CONTRACTOR SHALL PATCH AND REPAIR DRYWALL CEILING THAT IS EXISTING TO REMAIN. TO BE RETURNED THEIR ORIGINAL CONDITION AT NO ADDITIONAL COST EXISTING TENANT OR TENANTS AND THE USE OF ELEVATORS, ETC. AND FIELD CONDITIONS DISCREPANCIES IN PRODUCTS SPECIFIED. CASE OF DISCREPANCY THE AMERICAN INSTITUTE OF ARCHITECTS SHALL APPLY. AND FACILITATE INSTALLATION OF ALL ITEMS FOR WORK MARKED N.I.C. ,REFER TO DRAWINGS. APPLICABLE REGULATIONS, LAWS AND ORDINANCES CONCERNING REMOVAL, HANDLING TO ACCOMMODATE DEMOLITION ACTIVITIES. COORDINATE INTERRUPTIONS UTILITIES WITH THE TO EXISTING SYSTEMS. (REFER ENGINEERING DRAWINGS FOR ADDITIONAL INFORMATION) 4. THE CONTRACTOR SHALL FURNISH ALL LABOR MATERIALS & EQUIPMENT TO DISCONNECT, SHOWN ON THIS PLAN AND SHALL REVIEW THESE PRIOR TO PROCEEDING WITH WORK. SHOWN, UNLESS THEY ARE MARKED N.I.C. (NOT IN CONTRACT). CONTRACTOR SHALL COORDINATE SMOOTH, READY TO RECEIVE NEW FINISH. STRUCTURE SYSTEM. STRUCTURE OR EQUIPMENT CAUSED BY THIS OPERATION AND SHALL NOT INTERFERE WITH EXISTING DENOTES EXISTING TO BE REMOVED. DENOTES EXISTING TO REMAIN. LEGEND: DEMOLITION NOTES: FIRE PROOFING NOTE FIELD VERIFICATION PRE-SCHEDULE MEETING WITH THIS OFFICE, THE RESPECTIVE SUBCONTRACTORS BIDDING. FIELD VERIFICATION CONTRACTOR. QUALITY VERIFICATION AFTER COMPLETION, THE GENERAL CONTRACTOR MUST CONDITIONS DIRECTLY AFFECTING THE PRODUCT OR ITS INSTALLATION MUST BE FIELD WIRE REMOVAL VERIFIED BY THE CONTRACTOR OR A APPOINTED REPRESENTATIVE PRIOR VARIOUS SOURCES ASSOCIATED WITH THIS PROJECT AND DEEMED AS RELIABLE. CONTRACTOR SHALL ADD FIRE PROOF INSULATION AT GAPS (ABOVE AND BELOW) NOTE: CONSTRUCTION ACTIVITIES ATTENDING, AND AN HOURLY FEE WILL BE CHARGED BY THIS OFFICE TO THE GENERAL SITE INSPECTIONS NOTE: WHERE THE SLAB STOPS BEFORE WINDOWS. CONTRACTOR TO PROVIDE METAL STRIP BAGS. FOLLOW SAFETY PRECAUTIONS WHEN REMOVING OLD CABLE. ENSURE THAT WORKERS REMOVE ALL CABLES THE WAY TO ELECTRICAL PANEL. REMOVE CABLE THAT IS NOT BEING USED OR WILL BE USABLE IN THE FUTURE. REMOVE OLD CABLE. AS PER 2010 REVISIONS TO THE NATIONAL ELECTRICAL CODE, AS REQUIRED TO COVER THE GAP, WELL FIRE PROOF CAULKING. OPERATIONS OF BUILDING TENANT+/- OR CAUSE THE CONTRACTOR'S TO ENTER CREATE DISTURBING NOISE LEVELS OR OTHERWISE INTERFERE WITH THE DAY TO WEEKENDS (COORDINATE WITH PROPERTY MANAGER REPRESENTATIVE). WEAR PROPER RESPIRATORY PROTECTION, AND SEAL REMOVED CABLE IN PLASTIC ALL CONSTRUCTION ACTIVITIES, BOTH DEMOLITION AND NEW WORK, WHICH MIGHT THESE ACTIVITIES SHALL INCLUDE BUT ARE NOT LIMITED TO: TENANT SPACES SHALL BE PERFORMED AFTER NORMAL BUSINESS HOURS OR ON x x x x x x x x PLAN KEYED NOTES: FIRE ALARM TESTING DISRUPTION OF TENANT ACTIVITIES. DISABLING THE HVAC SYSTEM. DRILLING CONCRETE SLABS FOR PIPE HANGERS. CRANE OPERATIONS CUTTING OR CORE DRILLING, IN CONCRETE FLOORS WALLS. X-RAYING SMOKE EVACUATION INSPECTIONS IF SITE INSPECTIONS ARE REQUIRED, DURING CONSTRUCTION, OR CONSTRUCTION THESE DRAWINGS INCORPORATE BUILDING INFORMATION COMPILED FROM REMOVE EXISTING DOORS COORDINATE STORAGE WITH TENANT. REMOVE EXISTING GYP. BD. CEILING AND LIGHTS EXISTING FURNITURE COORDINATE STORAGE WITH TENANT. EXISTING PARTITION TO BE REMOVED. EXISTING TO REMAIN DRYWALLS BE REPAIR/REPLACE AS REQUIRED, TYPICAL EXISTING STAIRS TO REMAIN, REFER FINISH PLAN FOR NEW FINISHES. REQUIRED FOR THE INSTALLATION OF A NEW ENLARGED SHOWER. EXISTING SHOWER TO BE REMOVED, PLUMBING LINES RETROFITTED AS REMAIN,REPAIRED OR REPLACED AS REQUIRED. EXISTING PLUMBING FIXTURES TO BE REPLACED, LINES REQUIRED FOR THE INSTALLATION OF A NEW SHOWER. EXISTING TUB TO BE REMOVED, PLUMBING LINES RETROFITTED AS PROVIDE NEW OPENING FOR THE INSTALLATION OF A DOOR, REFER TO DOOR AND A/C REGISTERS. EXISTING FLOOR FINISHES TO BE REMOVED. EXISTING DOORS TO REMAIN, PROVIDE NEW AS REQUIRED , PAINT FINISH, REFER FINISH SCHEDULE. THRU-OUT, NEW PAINT FINISH. SCHEDULE FOR MORE INFORMATION. PRIOR TO BIDDING ON THE PROJECT. NO VISIT BID SHALL PREVAIL. CONTRACTOR SHALL VISIT THE SITE AND FAMILIARIZE WITH EXITING CONDITIONS : *SHADED AREA DENOTES NOT IN CONTRACT Scale: 1/4"=1'-0" Demolition Plan

N O T E : C O N T R A C T O R S H A L L C H E C K A N D V E R I F Y A L L P L A N D I M E N S I O N S A N D C O N D I T I O N S B E F O R E P R O C E E D I N G W I T H C O N S T R U C T I O N A N D S H A L L N O T I F Y G - S T U D I O O F A N Y D I S C R E P A N C I E S . D O N O T S C A L E D R A W I N G S . A L L W R I T T E N D I M E N S I O N S S H A L L G O V E R N . D R A W I N G S / E L E C T R O N I C M E D I A A R E T H E P R O P E R T Y O F D E S I G N E R / G - S T U D I O A N D S H A L L N O T B E U S E D W I T H O U T E X P R E S S E D W R I T T E N C O N S E N T . SHEET NO. checked by: drawn by: release date: scale: 1428 Brickell Ave, Suite 202 City of Miami Police Department Llc# AA-26001740 +1 (305) 371 8400 D-1 Marine Patrol Office Miami, FL 33131

Watson Island 1 1001 MacArthur Causeway 03/14/2016 March 14, 2016 Miami, Fl, 33132 as shown cv/ga as/pp DEMOLITION PLAN & NOTES 19. CONTRACTOR TO PROVIDE COMPLETE SHOP DRAWINGS OF MILLWORK OR 18. SUBSTITUTIONS ARE TO BE SUBMITTED FOR APPROVAL WITH SUFFICIENT TIME AS 17. CONTRACTOR SHALL COORDINATE AND ARRANGE USE OF TOILET FACILITIES 16. ALL CONSTRUCTION DELIVERIES ARE TO BE COORDINATED WITH THE BUILDING 15. THE CONTRACTOR IS RESPONSIBLE FOR ALL DAMAGE THAT OCCURS TO 14. ALL CONSTRUCTION WORK PERFORMED ON OTHER FLOORS / TENANT SPACES, 13. REPAIR AND RESTORE, TO MATCH ALIGN WITH ALL EXISTING MATERIAL 12. ALL EXISTING SURFACES THAT ARE WITHIN THE SCOPE OF NEW WORK SHALL BE 11. FOR ALL DEMOLITION WORK AND REMOVAL OF CONSTRUCTION DEBRIS, THE 10. CONTRACTOR SHALL REMOVE, CUT AND PATCH ALL EXISTING CONSTRUCTION 1. CONTRACTOR IS RESPONSIBLE FOR PROVIDING (FURNISHING AND INSTALLING) (NOT IN CONTRACT). CONTRACTOR SHALL COORDINATE AND FACILITATE EXISTING CONDITIONS NOT SHOWN ON THIS PLAN AND SHALL REVIEW THESE PRIOR DEMOLITION AND CONSTRUCTION. BACK. NOTIFY THE ARCHITECT PRIOR TO PROCEEDING WITH ORDERING OR INSTALLATION EXTINGUISHER SS2409-5R ARCHITECTURAL CABINET; MP-5 5LB. FIRE EXTINGUISHER. EXTINGUISHER CABINETS AS REQUIRED BY CODE. ONE PER 2500 SQ. FT.. AND NOT EXISTING BUILDING, OTHER FLOOR AREAS AND TENANT SPACE CAUSED BY THE NEW PERFORMING ANY WORK. FINISHES. NEW FINISHES OR MADE TO MATCH ALIGN WITH ALL EXISTING MATERIALS AND EXAMINED FOR CRACKS, WAVES, IMPERFECTIONS AND IRREGULARITIES: ALL PARTITIONS UNLESS OTHERWISE NOTED. HARDWARE LEVER HEIGHT. ELECTRICAL, MECHANICAL DRAWINGS. ARCHITECT WILL LOCATE ELECTRICAL HIMSELF WITH ALL EXISTING STRUCTURAL, MECHANICAL AND ELECTRICAL DEPARTMENTS AND SHALL OBSERVE FOLLOW ALL APPLICABLE ORDINANCES REGARDLESS OF WHERE OR HOW IT IS SHOWN, UNLESS THEY ARE MARKED N.I.C. IN 10' MAX. SLOPE. CONTRACTOR SHALL NOTIFY THE ARCHITECT HIS INTENDED INCONSPICUOUS MANNER BY SLOPING FROM THE HIGHEST TO LOWEST POINTS IN IN THE PLANS AND FIELD CONDITIONS DISCREPANCIES PRODUCTS 7. WRITTEN DIMENSIONS ON THESE DRAWINGS SHALL HAVE PRECEDENCE OVER INITIAL LAYOUT BEFORE PROCEEDING WITH STUDS INSTALLATION. CONTRACTOR 6. CONTRACTOR SHALL BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS INSTALLATION OF ALL ITEMS FOR WORK MARKED N.I.C., REFER TO DRAWINGS. COMPLETION OF CHALK LINE LAYOUT PARTITIONS FOR REVIEW AND APPROVAL. CONTRACTOR SHALL PROVIDE FOR A LIVE LOAD OF 5 POUNDS PER SQUARE FOOT MANUFACTURERS SPECIFICATIONS, THE GYPSUM ASSOCIATION STANDARDS. MILLWORK AND CABINETRY WHERE REQUIRED. OF MATERIALS. THE FINISH PLAN AND ELEVATIONS SHALL TAKE PRECEDENCE OVER MORE THAN 75 FEET APART. LARSERNS FIRE EXTINGUISHER CABINET & CEILING TILES. OTHER DEVICES, IF AND WHERE REQUIRED, SHALL BE LOCATED CENTERED ON METHOD BEFORE PROCEEDING WITH THE WORK. MANAGEMENT. CONSTRUCTION. CONTRACTOR IS TO COORDINATE WITH THE BUILDING ENGINEER IN ORDER THAT IT MOST EXPENSIVE SOLUTION APPLIES. OUTLETS AND SWITCHES IN THE FIELD. HEIGHTS SHALL BE CENTERED WITH ON THE JOB. CONTRACTOR SHALL OBTAIN APPROVAL FROM ARCHITECT FOR CONDITIONS INVOLVED IN THIS CONTRACT. CONSTRUCTION BY THE AMERICAN INSTITUTE OF ARCHITECTS SHALL APPLY. WHICHEVER GOVERNS. WORKING DAYS. WITH BUILDING MANAGER AT A PRE-CONSTRUCTION MEETING. WRITTEN PERMISSION FROM THE OCCUPIED SPACE AND OWNER PRIOR TO WILL NOT INTERFERE WITH THE EXISTING TENANTS AND USE OF ELEVATORS, ETC. 9. SHOWN DIMENSIONS ARE ALWAYS GIVEN TO THE FINISHED SURFACE OF 34. GENERAL CONTRACTOR SHALL NOTIFY G. ALVAREZ STUDIO, INC. OF ANY 33. GENERAL CONTRACTOR SHALL NOTIFY G. ALVAREZ STUDIO, INC. UPON 32. CONTRACTOR SHALL INSPECT THE SITE PRIOR TO BID. 31. THESE PLANS AND ALL SPECIFICATIONS WITHIN SHALL COMPLY WITH 30. CONTRACTOR SHALL MAINTAIN THE INTEGRITY OF FIRE ENVELOPE DURING 29. ALL FINISHES SHALL MEET THE REQUIREMENTS OF NFPA 1O1 (CURRENT EDITION) 28. ALL PENETRATION FIRE STOPS FOR METAL PIPE AND INSULATED SHALL BE IN 2305.5 OR THE STANDARD BUILDING CODE (CURRENT EDITION) SECTION 1604, 27. CONTRACTOR SHALL INSTALL THESE ASSEMBLIES IN ACCORDANCE WITH THE 26. CONTRACTOR SHALL LOCATE OUTLETS ON THE SURFACE OF INTERIOR 25. WHERE THERE ARE CONFLICTS IN THE DRAWINGS. CONTRACTOR SHALL 24. CONTRACTOR TO PROVIDE FIRE EXTINGUISHERS AND SEMI-RECESSED 23. ALL SPRINKLER HEADS, DOWN LIGHTS, SPEAKERS, SMOKE DETECTORS AND 22. ALL STONE JOINTS SHALL BE MAXIMUM 1/32" AT FLOOR TILES AND SLABS. 21. ALL DIFFERENCES IN FLOOR LEVEL SHALL BE FEATHERED THE MOST 20. FOR SCOPE OF MILLWORK SEE PLANS, ELEVATIONS, SECTIONS, AND DETAILS. 8. CONTRACTOR SHALL NOTIFY ARCHITECT OF ANY DISCREPANCIES IN DIMENSIONS 5. CONTRACTOR SHALL INSPECT THE DEMISED BUILDING AREA AND FAMILIARIZE 3. THE LATEST VERSION OF GENERAL CONDITIONS CONTRACT FOR 2. CONTRACTOR SHALL OBTAIN ALL PERMITS WITH APPLICABLE BUILDING TO PROCEEDING WITH WORK. APPLICABLE CODES. THERE SHALL BE NO COMMUNICATIONS OF ELECTRICAL BOXES LOCATED BACK TO ACCORDANCE WITH UNDERWRITERS LABORATORY TEST ASSEMBLY UL 1479. 28. AND MAINTAIN A DEFLECTION OF L/240 PER THE F.B.C. (CURRENT EDITION) SECTION THE FINISH SCHEDULE OR PLANS. ALL DIRECTIONS WITH LATICRETE OR OTHER APPROVED METHOD AT A RATE OF 1/8" ANY OTHER WORK REQUIRING REVIEW AND APPROVAL IN A TIMELY FASHION. ALLOW SUFFICIENT TIME FOR SUBSTITUTIONS RESEARCH AND APPROVALS. AVAILABLE OR NON-CODE COMPLIANT IN ORDER NOT TO AFFECT SCHEDULE AND TO NOT AFFECT SCHEDULE. CONTRACTOR SHALL NOTIFY THE ARCHITECT BEFORE ADDITIONAL COST TO EXISTING TENANT OR OWNER. CONTRACTOR SHALL OBTAIN THE SPACES ARE TO BE RETURNED THEIR ORIGINAL CONDITION AT NO ALTERED DURING THE EXECUTION OF WORK IN THIS CONTRACT. AND FINISH, ALL WORK BEYOND LIMITS OF NEW THAT IS DAMAGED OR ALTERED WORK. AND FINISHES AS REQUIRED TO PREPARE THE PREMISES FOR NEW WORK 4. CONTRACTOR SHALL SUBMIT UNIT PRICES FOR ALL MATERIAL AND LABOR COSTS. AND CODES. ALL ITEMS DESCRIBED IN THE DRAWINGS FOR A COMPLETE INSTALLATION SECTION 27-3.3.1 FOR FLAME SPREAD AND SMOKE GENERATION. STAINLESS STEEL FINISH. SHOP DRAWINGS WILL BE REVIEWED AND APPROVED WITHIN A MAXIMUM OF 10 SIGNING OF CONTRACT ANY MATERIALS OR PRODUCTS THAT ARE NOT SURFACES SHALL BE EITHER PATCHED OR PLASTERED AND MADE READY TO RECEIVE SPECIFIED. IN CASE OF DISCREPANCY METHODS OR PRODUCTS & MATERIAL, SCALED DIMENSIONS. CONTRACTOR SHALL NOT SCALE ARCHITECTURAL, SECTIONS, AND DETAILS BEFORE CONSTRUCTION OF WALLS. SHALL REVIEW AND BECOME FAMILIAR WITH ALL DRAWINGS: PLANS, ELEVATIONS, CONSTRUCTION NOTES: (PROVIDE 2 KEYS PER LOCK) RATED INTEGRITY. LANDLORD'S ADDITIONAL NOISE ATTENUATION AND FIRE-RATING REQUIREMENTS. PERTAINING TO ENVIRONMENTAL PROTECTION. NOISE CONTROL PROTECTION. COMPLY WITH GOVERNING REGULATIONS MILLWORK FINISHES AND HARDWARE TO BE USED. CONTRACTOR SHALL PROVIDE CONSERVATION STANDARDS. CONTRACTOR SHALL PROVIDE FOR A LIVE LOAD OF 5 POUNDS PER SQUARE FOOT MANUFACTURERS SPECIFICATIONS, THE GYPSUM ASSOCIATION STANDARDS. ALL NECESSARY HARDWARE AND INTERIOR MILLWORK COMPONENTS. 48. CONTRACTOR SHALL PROVIDE DETAILED SHOP DRAWINGS NOTING ALL ANODIZED ALUM. FRAMES W/ DOOR PULLS & TOP LOCKING BY DIRTT. 47. 'D.G.W.' REFERS TO DIRTT FRAMELESS GLASS BARN DOOR& FRAMED SIDELIGHT. 46. 'O.P.H.' DENOTES OPPOSITE HAND ELEVATION. 45. ALL WALL CONNECTIONS/TERMINATIONS AT CURTAIN SHALL COMPLY W/ 44. A MOISTURE/WATER SENSOR SHALL BE PROVIDED AS PER BUILDING 43. ALL SINKS W/ COLD WATER SUPPLY SHALL BE TYPE L COPPER. 42. ALL PLUMBING FIXTURES SHALL COMPLY W/ EPACT 1992 WATER AFTER HOURS. CONTRACTOR SHALL COORDINATE WITH OWNER. 41. FIRE ALARM TESTING AND SMOKE EVACUATION SHALL BE CONDUCTED 40. CONTRACTOR SHALL PRACTICE ALL PRACTICAL CARE TO PROVIDE DUST AND 39. ALL FINISHES SHALL MEET THE REQUIREMENTS OF NFPA 1O1 (CURRENT EDITION) AND MAINTAIN A DEFLECTION OF L/240. 38. CONTRACTOR SHALL INSTALL THESE ASSEMBLIES IN ACCORDANCE WITH THE 38. "PH" SHALL DENOTE PANIC HARDWARE . 37. "L" SHALL DENOTE BUILDING STANDARD LOCK-SET. KEYED TO MASTER. 36. "C" SHALL DENOTE DOOR CLOSERS, BUILDING STANDARD. ALTERATION CONTRACTOR SHALL CAP & FILL SLAB/PARTITION WITH SAME FIRE 35. ANY ELECTRICAL & PLUMBING LINES WHICH REQUIRE REMOVAL AND/OR SECTION 27-3.3.1 FOR FLAME SPREAD AND SMOKE GENERATION. KEYED NOTES: TYPICAL WALL LEGEND: NEW CABINET/PANTRY BY TENANT'S FURNITURE VENDOR. GC TO COORDINATE ENCLOSURE AT 8'-0" HIGH. PROVIDE SOUND INSULATION AT EXISTING BATHROOM PLUMBING WALLS. NEW PLUMBING FIXTURES TO REPLACE EXISTING NEW APPLIANCES BY GC. REFER TO SHEET A-6.0 FOR SPECS AND DETAILS. NEW MILLWORK UNIT. REFER GENERAL NOTES FOR REQUIREMENTS. TO ENGINEERING DRAWINGS FOR MORE INFORMATION. ENGINEERING DRAWINGS FOR MORE INFORMATION. GC TO PROVIDE OPTIONS FOR GALVANIZED FENCING CAGE WITH LOCKABLE LATCH W/ TOP G.C. TO PROVIDE WOOD BLOCKING IN-WALL FOR ALL TV LOCATIONS COORDINATE G.C. TO PROVIDE INSTANT HOT WATER HEATER @ SINK LOCATION. REFER WITH TENANT FOR LOCATIONS. REFER TO ELECTRICAL LOCATION PLAN AND ADJACENT MILLWORK WITH TENANT'S FURNITURE VENDOR. A-6 SERIES OF DRAWINGS FOR MORE INFORMATION & DETAILS. G.C. TO REPAINT EXISTING FACIAS WHERE PAINT IS CHIPPING OFF. REFER TO INTERIOR ELEVATIONS. NEW FRAMELESS CAT II SAFETY GLASS TO BE ALIGNED WITH TOP OF DOOR FRAME . PROVIDED BY OWNER AS DEDUCT ALT. G.C. TO PRICE COORDINATE WALLS AS KI EVOKE DEMOUNTABLE WALL SYSTEM BE G.C. TO PRICE DOORS AT OFFICE LOCATIONS AS SLIDING GLASS WITH SIDELIGHT TO BE PROVIDED BY OWNER AS DEDUCT ALT. CAST IRON DRAIN DENOTES EXISTING WALL TO REMAIN BOARD ON EACH SIDE (REFER TO WALL TYPES SHEET A-2.2), TAPED AND SPACKLED EXISTING CEILING FRAMING, PROVIDE ONE (1) LAYER OF 5/8" GYPSUM WALL NEW INTERIOR PARTITION : BOARD ON EACH SIDE (REFER TO WALL TYPES SHEET A-2.2), WITH R-11 BATT EXISTING CEILING FRAMING, PROVIDE ONE (1) LAYER OF 5/8" GYPSUM WALL NEW INTERIOR PARTITION (SOUND INSULATED): INSULATION IN THE WALL CAVITY, TAPED AND SPACKLED TO A PAINT READY FINISH. 3 5/8" METAL STUDS (24 GA) AT 16" ON CENTER UP TO THE UNDERSIDE OF 3 5/8" METAL STUDS (24 GA) AT 16" ON CENTER UP TO THE UNDERSIDE OF TO A PAINT READY FINISH. DRAIN W/MESH REINFORCEMENT MORTAR BED 1 1/2" DEEP MIN. SLOPE TO CEMENTITIOUS BOARD DRAIN BODY AND CLAMP SHOWER PAN MEMBRANE TURN INTO AND SECURE TO WALL RUN SHOWER PAN MEMBRANE UP WALL CONT. SEALANT CER TILE FINISH CEMENTITIOUS BOARD SHOWER CURB DTL. DRAIN W/MESH REINFORCEMENT MORTAR BED 1 1/2" DEEP MIN. SLOPE TO BOND COAT CER. TILE CURB TO SUB-FLOOR CONT. P.T. WD. ECURED CEMENTITIOUS BOARD CHAMFER BOTH SIDES CER TILE TO BE SELECTED BY OWNER CER TILE ON THINSET LESS 6 FEET A.F.F. FINISHED WITH NONABSORBENT SURFACE EXTENDED TO A HEIGHT NOT NON-BEARING PARTITIONS SUPPORTING WALL HUNG PLUMBING FIXTURES AND WALL CABINETS SHALL NOT BE LESS THAN 2x4 STUDS, WHERE SPACED MORE WALL HUNG FIXTURES STUDS IN BEARING WALLS, EXTERIOR WALLS AND SHOWER FLOORS AND WALLS IN COMPARTMENTS SHALL BE THAN 16 O.C. BEHIND TUB TILES OR SHOWER AREAS PROVIDE CAT. II SAFETY GLAZING TO NOTE: GREEN BOARD SHALL NOT BE USED AS HARDIBOARD DIRECTLY F.B.C. EXCEED 450 WHEN TESTED IN ACCORDANCE WITH ASTM E 84 PER R316.1 EXCEED 25 WITH AN ACCOMPANYING SMOKE-DEVELOPED INDEX NOT FLOOR -CEILING ASSEMBLIES SHALL HAVE A FLAME-SPREAD INDEX NOT TO NOTE: OF NOT GREATER THAN 200 PER R315.1 FBC INSULATION MATERIALS WITHIN AND WITHING 60" A.F.F. OF TUBS SHOWERS ALL SLIDING, SWINGING GLASS DOORS, SIDELIGHTS SHOWER ENCLOSURES WALL AND CEILING FINISHES SHALL HAVE A FLAME-SPREAD CLASSIFICATION NOT LESS THANK 20 GAGE WITH A MINIMUM MOMENT OF INERTIA EQUAL TO 0.864 IN SUCH STUDS SHALL BE RIGIDLY CONNECTED TO TOP AND BOTTOM PREVENT SIGNIFICANT ROTATION OR DISPLACEMENT. PER FBC 25.5.1.1 STEEL STUDS SUPPORTING WALL HUNG PLUMBING FIXTURES SHALL BE DOUBLE OR *SHADED AREA DENOTES NOT IN CONTRACT Scale: 1/4"=1'-0" Construction Plan Second FLoor Scale: 1/4"=1'-0" Partial Ground Floor

A-2.1 City of Miami Police Department +1 (305) 371 8400 Marine Patrol Office Miami, FL 33131

Watson Island 1 1001 MacArthur Causeway 03/14/2016 March 14, 2016 Miami, Fl, 33132 as shown cv/ga as/pp CONSTRUCTION PLAN & NOTES . T N E S N O C

N E T T I R W

EXISTING STRUCTURE TO REMAIN EXISTING STRUCTURE TO REMAIN EXISTING STRUCTURE TO REMAIN D E S S E R P X E +8'-0"AFF +8'-0"AFF

+8'-0"AFF T U O H T 3-5/8" TOP PLATE RUNNERS 3-5/8" TOP PLATE RUNNERS I W

ARMSTRONG FASTEN AT 16" O.C 1/2 " GYP. BD. ARMSTRONG ARMSTRONG FASTEN AT 16" O.C D E

DIRECT DIY CEILING MAX. 8'-0" A.F.F. HARDIBOARD CEILING DIRECT DIY CEILING DIRECT DIY CEILING MAX. 8'-0" A.F.F. S U

TILE AND GRID SYSTEM PAINT FINISH TILE AND GRID SYSTEM TILE AND GRID SYSTEM E B 1" ALUMINUM CHANNEL RECESSED T O

FULL THICKNESS BLANKET N FULL THICKNESS BLANKET Llc# AA-26001740 L

ACOUST. INSULATION ACOUST. INSULATION L A H

S 1428 Brickell Ave, Suite 202

D Miami, FL 33131 N

BATHROOM A 3/8" CAT II SAFETY GLASS O

I +1 (305) 371 8400

SIDE LIGHT PANEL D U

ALIGN WITH TOP OF ADJACENT DOOR T CER. TILE FINISH S FRAME - ON CEMENT BOARD, G 5/8 " GYP. BD. 5/8 " GYP. BD. / R ON 3-5/8" MTL STUDS ON 3-5/8" MTL STUDS E 3 5/8 " METAL STUDS N 16" O.C. G 5/8" GYP. BD. 16" O.C. I

@ 16" O.C. S ON 3-5/8" MTL STUDS E D

25 GA.16" O.C. F PAINT FINISH PAINT FINISH O

Y 03/14/2016 T R E

P 1 O R

BASE AND FLR. FINISH BASE AND FLR. FINISH P

AS SCHEDULED E

AS SCHEDULED H T CONT. MTL. FIN. FLOOR CONT. MTL. FIN. FLOOR E RUNNER 1" ALUMINUM CHANNEL SATIN SILVER R RUNNER A

ON GRAY GASKET OR CLEAR SILICONE SEALERS A

W/SEALANT W/SEALANT I D

ALL AROUND ALL AROUND FLOOR FINISH E M 0'-0" 0'-0" 0'-0" C I N O R T C E L E EXISTING EXISTING EXISTING / S G N I W A R D

Insulated Partition Insulated Partition Glass Wall Partition N R 1 2 3 E SCALE: 1" = 1'-0" SCALE: 1" = 1'-0" (BATHROOMS) SCALE: 1" = 1'-0" V O G

L L A H S

S N O I S N E M I D

N E T T I R W

L L A

. S G N I W A R D

E L A C S

T O N

O D

. S E I C N A P E R C S I D

Y N A

F O

O I D U T S - G

Y F I T O N

L L A H S WALL SECTIONS & DETAILS

Watson Island Miami, Fl, 33132 1001 MacArthur Causeway City of Miami Police Department Marine Patrol Office D N A

N O I T C U R T S N O C

H T I W

G N I D E E C O R P

E R O F E B

S N O I T I D N O C

D N A

S N O I S N E M I D

N A L P

L L A

Y F I

R scale: E as shown V

N release date: A

March 14, 2016 K

C drawn by: E

H as/pp C

L checked by: L

A cv/ga H S

R O T C A R T N O C

: E

T A-2.2

O SHEET NO. N . T N E

TYP. MOUNTING ELEVATIONS: DOOR SCHEDULE: S N

FIRE/LIFE SAFETY DEVICE (TYP.); O C

CEILING MOUNTED PREFERRED. DOOR FRAME N

COORDINATE W/ ARCHITECT WHEN CEILING LINE E

NO. ROOM NAME T

SWING T WALL-MOUNTED DEVICES ARE USED. HDWR. I

TH. FIN. MAT. FIN. JAMB NOTES R EDGE OF DOOR OR SIDELIGHT FRAME TYPE W H HDWR TYPE SIDE NOTES SILL SET W FIRE EXTINGUISHER D

1 CLOSET - 01 A 3'-0" 7'-6" 1-3/4" WOOD SEE NOTES -- SEE PLAN -- HM -- H1 H2 T.B.D. NEW HOLLOW METAL FRAME WOOD DOOR. COORDINATE HARDWARE WITH TENANT'S KEYING VENDOR. E CABINET AS SCHED. FIRE ALARM STROBE S S E

WOOD W/ R IPAD 2 HALL - 02 B 3'-0" 7'-6" 1-3/4" SEE NOTES -- SEE PLAN -- HM -- H1 H2 T.B.D. NEW HOLLOW METAL FRAME WOOD DOOR WITH GLASS INSERT. COORDINATE HARDWARE WITH TENANT'S KEYING VENDOR. P EQ. EQ. 6" GLASS INSERT X E

AMR CHECKIN

WOOD W/ T

NOTE: FRAME WHERE OCCURS 3 OFFICE - 03 B 3'-0" 7'-6" 1-3/4" SEE NOTES -- SEE PLAN -- HM -- H1 H2 T.B.D. NEW HOLLOW METAL FRAME WOOD DOOR WITH GLASS INSERT. COORDINATE HARDWARE WITH TENANT'S KEYING VENDOR. U

GLASS INSERT O

CONTRACTOR TO 7 1/2" H T

WOOD W/ I COORDINATE ROUGH OPENING WHERE OCCURS 4 OFFICE - 04 B 3'-0" 7'-6" 1-3/4" SEE NOTES -- SEE PLAN -- HM -- H1 H2 T.B.D. NEW HOLLOW METAL FRAME WOOD DOOR WITH GLASS INSERT. COORDINATE HARDWARE WITH TENANT'S KEYING VENDOR. W LOCATION W/ LV GLASS INSERT THERMOSTAT D TEAM. E 5 RR - 06 A 3'-0" 7'-6" 1-3/4" WOOD SEE NOTES -- SEE PLAN -- HM -- H1 H2 T.B.D. NEW HOLLOW METAL FRAME WOOD DOOR. COORDINATE HARDWARE WITH TENANT'S KEYING VENDOR. S U

EDGE OF DOOR/OPENING WHERE OCCURS E B

ROOM SIGNAGE, DOOR/WALL PHONES ETC. WOOD W/

6 HALL - 02 B 3'-0" 7'-6" 1-3/4" SEE NOTES -- SEE PLAN -- HM -- H1 H2 T.B.D. NEW HOLLOW METAL FRAME WOOD DOOR WITH GLASS INSERT. COORDINATE HARDWARE WITH TENANT'S KEYING VENDOR. T

GLASS INSERT O N Llc# AA-26001740 1-3/4" L 7 BREAK ROOM - 07 A 3'-0" 7'-6" WOOD SEE NOTES -- SEE PLAN -- HM -- H1 H2 T.B.D. NEW HOLLOW METAL FRAME WOOD DOOR. COORDINATE HARDWARE WITH TENANT'S KEYING VENDOR. L

LIGHT & PROJECTION SCREEN SWITCHES, A H

S 1428 Brickell Ave, Suite 202 WALL MOUNTED OCCUPANCY MOTION 6'-8" 6" 8 STORAGE - 08 A 3'-0" 7'-6" 1-3/4" WOOD POCKET DOOR SEE NOTES -- SEE PLAN -- HM -- H1 H2 T.B.D. NEW POCKET DOOR. COORDINATE HARDWARE WITH TENANT'S KEYING VENDOR. D Miami, FL 33131 SENSOR & CARD READER N A 3'-0" 7'-6" 1-3/4" HM H1 H2 T.B.D. 9 RR - 09 A WOOD SEE NOTES -- SEE PLAN -- -- NEW HOLLOW METAL FRAME WOOD DOOR. COORDINATE HARDWARE WITH TENANT'S KEYING VENDOR. O I +1 (305) 371 8400 4'-2" HARDWARE LATCH D U 4'-6" T

3'-6" ------TELE/COMM./POWER 10 OPEN AREA - 10 ETR ------EXISTING TO REMAIN DOOR. COORDINATE HARDWARE WITH TENANT'S KEYING VENDOR. S - G 3'-6" /

11 RR - 09 A 3'-0" 7'-6" 1-3/4" WOOD SEE NOTES -- SEE PLAN -- HM -- H1 H2 T.B.D. R

NEW HOLLOW METAL FRAME WOOD DOOR. COORDINATE HARDWARE WITH TENANT'S KEYING VENDOR. E N 3'-0"O.C. G I 16" 12 IT CLOSET 6" 6" E -- 7'-6" -- -- SEE NOTES -- SEE PLAN -- HM -- H1 H2 T.B.D. S

U.N.O. NEW HOLLOW METAL FRAME BI-FOLD WOOD DOOR. COORDINATE HARDWARE WITH TENANT'S KEYING VENDOR. FINISHED FLOOR E D 16"

U.N.O. 3'-0" 1-3/4" HM H1 H2 T.B.D. NEW BUILDING STANDARD ENTRY HOLLOW METAL FRAME WOOD DOOR WITH GLASS INSERT DOUBLE DOORS. PROVIDE NEW CLOSER F 13 MAIN ENTRY DOOR C 7'-6" WOOD SEE NOTES -- SEE PLAN -- -- O

SEE ENGINEERING DWGS. FOR MOUNTING HEIGHT SEE ENGINEERING DWGS. FOR MOUNTING AND LOCKSET AND CARD READER AS PER TENANT'S SECURITY VENDOR.COORDINATE HARDWARE WITH TENANT'S KEYING VENDOR. Y 03/14/2016 T R E

P 1

COLUMN O

NOTE: R

WHERE OCCURS P WHERE SINGLE OUTLET OCCURS CENTER OUTLET IN WALL. E

PROVIDE MATCHING COVER PLATES FOR ALL SYSTEMS. H T

WHERE OTHER DEVICES FALL IN PROXIMITY OF EACH E

W =WITH TH =THICKNESS MAT =MATERIAL E.T.R. =EXISTING TO REMAIN N/A =NOT APPLICABLE STD =STANDARD E.S. =ELECTRIC STRIKE WD1 =WOOD VENEER (SEE FINISH SCHED) E.S.P. =ELECTROSTATIC PAINT R

OTHER, THEY ARE TO BE VERTICALLY ALIGNED. A H =HEIGHT FIN. =FINISH HDWR =HARDWARE T.M.E. =TO MATCH EXISTING BLDG STD. =BUILDING STANDARD MTL. =METAL S.F.T.M.E. =STAINED FINISH TO MATCH EXISTING S.F.T.C.S. =STAINED FINISH TO MATCH CONTROL SAMPLE A I D E M

C I

HARDWARE NOTES: HARDWARE SCHEDULE: N O

DOOR FRAMES/JAMB: DOOR HARDWARE SHALL BE COORDINATED WITH TENANT'S KEYING VENDOR: CABALLERO. BELOW IS FOR REFERENCE ONLY. R T C E L

HOLLOW METAL FRAME. CONTRACTOR SHALL SUBMIT FULL SET OF SHOP DRAWINGS FOR ARCHITECT'S REVIEW AND APPROVAL PRIOR TO SET #1: E SET #3: ***(PROVIDE NEW AS NEEDED) EXISTING HARDWARE TO REMAIN*** /

ORDERING. ALL SUBMITTALS SHALL BE PREVIOUSLY REVIEWED AND STAMPED BY GC PRIOR TO ARCHITECT' REVIEW. GC SHALL COORDINATE QTY. DESCRIPTION MODEL # MANUF. FINISH S QTY. DESCRIPTION MODEL # MANUF. FINISH ALL ROUGH OPENING DIMENSIONS IN FIELD PRIOR TO ORDERING DOORS/WALLS. G

1 ELECTRIC STRIKE LOCKSET (FAIL SAFE) L9082EL YALE POLISHED CHROME (US26) N

1 LOCKSET W/ THUMB TURN L9050 SCHLAGE POLISHED CHROME (US26) I

4 BUTT HINGES TA2714 MCKINNEY POLISHED CHROME (US26) W

DOOR HARDWARE NOTES : 4 BUTT HINGES TA2714 MCKINNEY POLISHED CHROME (US26) A 2 LEVER TRIM 07A SCHLAGE 626 FINISH R

2 LEVER TRIM 07A SCHLAGE 626 FINISH D

1 SURFACE MOUNTED CLOSER TS93-1 DORMA 626 FINISH .

DOOR HARDWARE SHALL BE COORDINATED WITH TENANT'S KEYING VENDOR: CABALLERO. 1 SURFACE MOUNTED CLOSER TS93-1 DORMA 626 FINISH N 1 ALARM CONTACT (COORDINATE WITH TENANT'S SECURITY VENDOR) R 1. ALL LOCKS AND CYLINDERS WILL BE KEYED TO LANDLORD'S REQUIREMENTS. GC TO PROVIDE KEY SCHEDULE FOR LANDLORD'S REVIEW AND E 1 PUSH TO RELEASE (COORDINATE WITH TENANT'S SECURITY VENDOR) V APPROVAL. LANDLORD'S APPROVED KEY SCHEDULE IS REQUIRED PRIOR TO ORDERING LOCKS/CYLINDERS. O 1 CARD READER (COORDINATE WITH TENANT'S SECURITY VENDOR) G

2. COMPONENTS: L L

x HINGES - MCKINNEY 652 (FINISH TO MATCH LEVER) OR CONCEALED SOSS HINGES WITH SPRING HINGE CLOSING MECHANISIM. A H S

x LOCKS - YALE 8800 SERIES, PINHURST SATIN CHROME 626. SET #2: S

x ESCUTCHEONS - LWI QTY. DESCRIPTION MODEL # MANUF. FINISH N O 2 PASSAGE LOCKSET 4701LN (F75) YALE - MONROE #625 BRIGHT CHROME POL. I

x LEVER - YALE 8800 SERIES, PINHURST SATIN CHROME 626. S N

x ALL DOOR LOCKS MUST BE KEYED TO THE BUILDING MASTER KEY SYSTEM. E M 3. ENTRY LOCKS ON DOORS AND/OR ALTERNATES TO SUITE SHALL BE KEYED TO BUILDING MASTER. I D

4. ALL LOCKS SHALL BE KEYED TO MASTER. N E

5. ALL OFFICES TO BE INDIVIDUALLY KEYED, AND KEYED TO THE MASTER. REFER TO SCHEDULE. T T

DOOR TYPE ELEVATIONS: I 6. HARDWARE SHALL COMPLY WITH N.F.P.A. 101 38.2.2.2, ADA & F.B.C. 1012. R W

7. ALL HARDWARE TO MEET ADA STANDARDS. L L

8. LOCKING HARDWARE ON ALL DOORS WITH EXIT SIGNS. NO INTERIORS KEY LOCK ALLOWED EXCEPT ON MAIN ENTRANCE/ EXIT & WOULD A

. HAVE TO BE INDICATING TYPE, (OPEN, & LOCKED), OR CAPTIVE KEY. THUMB-TURN ONLY LOCKS ALLOWED ON ALL. 2" V.I.F. 2" S 2" 3'-0" 2" G

2" 3'-0" 2" N DOOR NOTES: I W A R D

1. SEE SHEET A-2.1 FOR DOOR LOCATIONS, CARD READER LOCATIONS, DOOR CLOSER LOCATIONS AND ADDITIONAL INFORMATION. 6" E 2. PROVIDE CLOSER BLOCKING FOR RATED DOORS THAT HAVE MINERAL CORE CONSTRUCTION. L A

3. PROVIDE FLOOR MOUNTED DOOR STOPS ON ALL DOORS. C S

6" 2'-0" 6" 4. THIS BUILDING IS FULLY SPRINKLED. HOLLOW T HOLLOW HOLLOW O 5. ALL EXIT DOOR HARDWARE ALLOWS DOORS TO BE OPENED IN THE DIRECTION OF EXIT WITHOUT SPECIAL KNOWLEDGE OR EFFORT. METAL FRAME N METAL FRAME METAL FRAME 6. "C" SHALL DENOTE DOOR CLOSERS, TENANT STANDARD. (TYP.) O D

SATIN SATIN 7. "L" SHALL DENOTE LOCK-SET WITH BUILDING STANDARD CYLINDER KEYING. KEYED TO BUILDING MASTER. (PROVIDE 2 KEYS PER LOCK) . ALUMINUM S ALUMINUM E 8. U.NO. ALL DOORS AND GLAZING SYSTEMS SHALL HAVE SAME HEIGHTS AS THE UNDERSIDE OF CEILING GRID. ALL DOOR CEILING HEIGHTS ARE I (TYP.) (TYP.) C NOMINAL IN SIZE. CEILING HEIGHTS IN RCP ARE NOMINAL AND NATURE AND VARY DEPENDING OF THE UN-LEVELNESS OF THE EXISTING N A

BUILDING SLAB. P E 9. DOOR'S ELECTRIC STRIKE LOCKING MECHANISM TO RELEASE UPON FIRE ALARM ACTIVATION. PUSH BUTTON RELEASE ALSO LOCATED AT R C S RECEPTION STATION. ALL ELECTRIC STRIKE HARDWARE MUST BE FAIL-SAFE IN CASE OF EMERGENCY. I VISION D 3/8" CLEAR 7'6-"

10. PROVIDE ELECTRIC LOCKSETS AT DOORS W/ SECURITY CARD READER ACCESS AND BATTERY BACK-UP. COORD. CARD READER LOCATIONS W/ Y 7'-6" 6'-10" 7'-6" GLASS TEMP. N

TENANT'S SECURITY VENDOR. A

INSERT.

GLASS. F 11. CARD READERS REQUIRE POWER SUPPLY. CONTRACTOR TO ENSURE PROPER INSTALLATION. O

O I D U T S -

BI-FOLD G PAINT METAL Y

WOOD F GRADE DOOR I T 3'-0" DOOR 3'-0" O 3'-0" N

L L

SECURITY NOTES: A H S DOOR SCHEDULE & ELEVATIONS

Watson Island Miami, Fl, 33132 8" 1001 MacArthur Causeway City of Miami Police Department Marine Patrol Office

1. CONTRACTOR SHALL COORDINATE WITH SECURITY VENDOR ALL D N

SECURITY RELATED INFORMATION AND SPECIFICATIONS; VERIFY A

ALL HARDWARE AND HARDWARE COMPONENTS PRIOR TO N

A B C D E O I

ORDERING REGARDLESS OF ARCHITECT'S APPROVAL OF T

NEW HOLLOW METAL FRAME DOOR NEW WOOD DOOR & SIDE-LIGHT NEW METAL DOOR WITH VISION GLASS INSERT NEW BI-FOLD CLOSET DOORS POCKET DOORS C SUBMITTAL. SUBMITTAL REVIEW IS FOR DESIGN INTENT ONLY. IT U R T

DOES NOT WARRANT TRADE COORDINATION. S N O C

H T I W

H.M. DOOR SECTION DETAILS: G N I D E E C O R P

E R O F E B GYPSUM BOARD GYPSUM BOARD GYPSUM BOARD. SEE FLOOR S SEE FLOOR PLAN FOR SEE FLOOR PLAN FOR N O

PLAN FOR WALL TYPES I WALL TYPES T WALL TYPES I

HM FRAME D SOUND BATTS WHERE N HM FRAME SEE DOOR ELEVATIONS O C SEE DOOR ELEVATIONS DOOR HINGE AS SCHEDULED DOOR AS D SCHEDULED N A

SCHEDULED DOOR AS 3 5/8" MTL STUD HEAD S

SCHEDULED N O SEALANT I S N E

ANCHORS M I

THRESHOLD BELOW THRESHOLD BELOW D

3 PER HEAD (TYP)

- WHERE - WHERE N A

SCHEDULED L

SCHEDULED P

L L

HM FRAME, SEE A

JAMB ANCHORS JAMB ANCHORS DOOR ELEVATIONS Y F I

3 PER JAMB (TYP) 3 PER JAMB (TYP) R scale: E as shown DOOR, AS V

SEALANT SEALANT SCHEDULED D N release date: A

DBL STUD JAMB (TYP), March 14, 2016

DBL STUD JAMB (TYP), W/ K

W/ INSULATION C drawn by: INSULATION FRAME TO MATCH FRAME TO MATCH E SOUND BATTS NOTE: HEAD/JAMB H as/pp

SOUND BATTS WHERE WALL COLOR WALL COLOR C WIDTH MAY VARY BASED WHERE SCHEDULED L checked by: SCHEDULED L ON WALL TYPE 6" A cv/ga H S

R O T C A R T N O C

HOLLOW METAL FRAME STRIKE JAMB DETAIL HOLLOW METAL FRAME HINGE JAMB DETAIL HOLLOW METAL FRAME HEAD JAMB DETAIL E T A-2.3 H1 H2 H3

SCALE: 3" = 1'-0" SCALE: 3" = 1'-0" SCALE: 3" = 1'-0" O SHEET NO. N 19. 18. 17. 16. 15. 14. 13. 12. 11. 10. 1. 11. 10. 1. 7. 6. 7. 6. 9. 9. 5. 5. 21. 20. 8. 4. 3. 2. 8. 4. 3. 2. 22. EXIT LIGHTING DEVICES SHALL BE BUILDING STANDARD. CEILING NOTES: ACOUSTICAL CEILING DETAIL: FURNITURE LAYOUT. PROVIDE FIBER-GLASS ACCESS PANEL AT DRYWALL CEILING IF REQUIRED. EXHAUST AND VENTILATION DUCTWORK LOCATIONS OF GRILLES FROM THE FACE OF WALL AT A HEIGHT 6'-8" A.F.F. U.O.N. PROTRUDE BEYOND 4" PLACEMENT COMPLIES WITH ALL APPLICABLE CODE REQUIREMENTS. EXTEND SPRINKLERS & HVAC AS REQUIRED. VERIFY THAT SPRINKLER DIFFUSERS REFER TO CEILING PLANS FOR CLG. FINISHES. FLAT PAINT FINISH WITHOUT ANY APPARENT SEAMS OR IMPERFECTIONS. REQUIRED IN ROOMS WITH GYP. BD. CEILINGS. LOCATIONS WITH OWNER/TENANT SPRINKLER HEADS IN GYP. BD. CEILINGS PATTERN. ALL FIXTURES SHALL BE LOCATED IN CENTER OF CEILING TILE. U.O.N. THE LOCATION OF LIGHT FIXTURES, SPEAKERS, AND OTHER TILE DETAILS AND SPECIFICATIONS TO ACCOMMODATE VARIATIONS IN PROVIDE ACCESS PANELS IF REQUIRED. SHALL BE 14"X14" HVAC GRILL SPECIFICATIONS: TITUS 1-2-3 WAY REFLECTOR ALUMINUM LOCATED BY G. ALVAREZ STUDIO, INC. NEW. DOCUMENTS FOR ADDITIONAL INFORMATION. PROVIDE 5% ATTIC STOCK OF ACOUSTICAL TILE MATERIAL USED. HANGER WIRES. CEILING HEIGHT SHALL MATCH EXISTING U.O.N. HANGER WIRE TAUGHT AND PLUMB, WITHOUT KINKING OR BENDING LEVEL CEILING TO WITHIN 1/8" IN 12'-0" ANY DIRECTION. WITH PROCEEDING WITH ANY INSTALLATION REPORT DISCREPANCIES TO HORIZONTAL PIPING OR DUCTWORK. ONLY IN SCHEMATIC ZONES, PRINTED INSTRUCTIONS, AND TO COMPLY WITH ASTI C635, MEDIUM DUTY INSTALL SUSPENSION SYSTEMS IN ACCORDANCE WITH MANUFACTURES GLENDON COMPANY. CONTRACTOR TO PROVIDE SUBMITTAL FOR GYP. CLG. TO BE PAINTED P-1. U.O.N. INSTALL FRAMELESS LINEAR AIR G. ALVAREZ STUDIO, INC. GALVANIZED SOFT ANNEALED MILD STEEL WIRE. WIRES SHALL BE WRAPPED COMPATIBILITY W/ TECHSTYLE CEILING TILES AND ARMSTRONG CONTRACTOR TO PROVIDE APPROPRIATE LIGHTING TRIMS ENSURE COORDINATE OCCUPANCY SENSOR LOCATION WITH CEILING LAYOUT & MATCH THE COLOR OF CEILING TILE/FRAME AND NO APPARENT CIRCUIT & SWITCH ALL LIGHTING AS REQUIRED. MECHANICAL, ELECTRICAL AND PLUMBING CONTRACTORS SHALL DESIGN CEILING MOUNTED DEVICES SHALL BE DETERMINED BY THE GRID CEILING HEIGHTS AND EQUIPMENT INSTALLED THEREIN. MECHANICAL, PLUMBING, AND ELECTRICAL ENGINEERS SHALL REFER TO MODEL PCS-AA#26 WHITE RETURN: TITUS PAR-AA 2x2 LAY IN WHERE DRYWALL CEILINGS OCCUR CONTRACTOR SHALL PROVIDE BLDG. METAL AND PAINTED TO MATCH ADJACENT FINISH. PLASTIC TRIM IS NOT CLEARANCES AS REQUIRED FOR ALL LIGHTING FIXTURES BEFORE CONTRACTOR SHALL FIELD CHECK THE PREMISES AND VERIFY ALL MOLDINGS: PROVIDE MANUFACTURES STANDARD 'L' SHAPED MOLDINGS 0$,17$,1$1$1*/(2)2567((3(5 0,1&/($572$// MAX OF 48" O.C. ALONG MAIN RUNNERS (PROVIDE 12 GAUGE WIRE COORDINATE INSTALLATION WITH ELECTRICAL AND MECHANICAL WORK. ALL CEILING TILES THAT ARE CUT SHALL HAVE THE EDGE PAINTED TO ARCHITECT APPROVAL. ACCESS PANEL SHALL BE 14"X14" SEAMLESS BY THE AND REGISTERS TO DESIGNER FOR APPROVAL PRIOR CONSTRUCTION. ALL WALL MOUNTED FIXTURES SHALL BE SO AS NOT TO ALL SUSPENDED GYP. BD CEILINGS SHALL RECEIVE SKIM COAT. PREP FOR ALL SWITCH DEVICES AND COVERS SHALL BE DECORA LEVITON WHITE AND SOFFITS SHALL BE FULLY CONCEALED TYPE (RELIABLE AUTOMATIC ALL LIGHT SWITCHES, PROJECTION SCREEN CONTROLS, AND THERMOSTATS APPROVAL. ACCESS PANELS AT GYPSUM WALL BOARD CEILING SHALL BE FIELD "E" DENOTES EXISTING TO REMAIN. "R" RELOCATED. "N" ARCHITECT. ACCEPTABLE UNLESS APPROVED BY ARCHITECT. ALL FIXTURE TRIM (LIGHTING, SPEAKERS, HVAC, GRILLES, ETC.) SHALL BE AT LEAST (4) COMPLETE TURNS AROUND SUPPORTS. WIRE SPACING TO BE AS REQUIRED. HANGER WIRES SHALL BE NOT LESS THAN 12 GAUGE TILES. THE EXTERIOR. SEAMS OR GAPS SHALL BE NOTICEABLE. CUT/PAINTED EDGE FACE SUBMIT HVAC PLAN INDICATING SUPPLY AND RETURN DUCTWORK, THEIR RESPECTIVE SYSTEMS SUCH THAT NO ACCESS PANELS OF ANY TYPE BE SPRINKLERS INC.",) OR APPROVED EQUAL: FINISH WHITE. SHALL BE GANGED TOGETHER WHERE POSSIBLE. VERIFY ALL NEW SEAMLESS. CONTRACTOR TO PROVIDE SUBMITTAL FOR ARCHITECT'S STANDARD ACCESS PANELS, AS REQ. BY CODE LOCATION APPROVED THIS PLAN IS FOR LOCATION PURPOSES ONLY, REFER TO ENGINEERING TYPE SUSPENSION MEMBER, MOLDING AND HANGER FOR REVIEW BY SUBMIT ONE FULL SAMPLE OF ACOUSTICAL MATERIAL AND EACH THE ARCHITECT. TOP MATCH 'T' - MINIMUM LENGTH OF 18". SUPPORTS SPLAYED IN FOUR DIRECTIONS FOR DIAGONAL BRACING. SHALL CONSIST OF MAIN RUNNERS, CROSS RUNNERS AND STABILIZER BARS SUSPENSION SYSTEM: PROVIDE HUNG SYSTEM. GRILLAGE SYSTEM. SUSPENDED EXPOSED 'T' GRID AND LAY-IN CEILING TILES. THE ACOUSTICAL CEILINGS SHALL BE INSTALLED COMPLETE WITH SPECIFICATIONS. SEE ARCHITECTURAL DRAWINGS FOR EXTENT OF WORK, DETAILS AND CROSS RUNNER (REFER TO FINISH SCHEDULE) (REFER TO LINE 5 BELOW) SUPPORT WIRE LAY IN ACOUSTICAL CEILING TILE (REFER TO FINISH SCHEDULE) MAIN (REFER CEILING SCHEDULE) TO FINISH KEYED NOTES: EXIT F5 F4 F3A F3 F2 F1 LIGHT FIXTURE SCHEDULE: CEILING SCHEDULE: LABEL G.C. TO REPAINT EXISTING FACIAS WHERE PAINT IS CHIPPING OFF. B.O. ACOUSTICAL CEILING EL. 8'-0" DESCRIPTION EDGE LIT EXIT SIGN WALL MOUNTED 8' RECESSED LINEAR LIGHT 4" RECESSED DOWN LIGHT; 4" RECESSED DOWN LIGHT 2X4 PARABOLIC LIGHT FIXTURE SHOWER UTILITY LIGHT (VERIFY IN FIELD) EL. +8'-0" B.O. CEILING *SHADED AREA DENOTES NOT IN CONTRACT PROVIDE SUBMITTAL FOR ARCHITECT'S REVIEW AND APPROVAL. FROM DECK TO AS HIGH POSSIBLE INSTALL W/ FRAME LESS LINEAR/SLOT DRYWALL CLG. W/ NO APPARENT SEAMS OR IMPERFECTIONS SUSPENDED AS NEEDED BY INTERFORM, GLENDON OR APPROVED EQUAL. GC SHALL AIR DIFFUSERS. LEVEL 5 FINISH. PROVIDE SEAMLESS MUD IN ACCESS PANELS DC1 - NEW DRYWALL CEILING DIY CEILING SYSTEM : GC TO COORDINATE WITH TENANT AND TENANT'S SECURITY VENDOR. CCTV CAMERA BY TENANT: TILE AND GRID ACT1 - NEW ACOUSTICAL CEILING TILE AND GRID MANUFACTURER LITHONIA PINNACLE USAI USAI LITHONIA OXYGEN LITHONIA N.I.C. 1020-B1-10-LRTD4-9020-M2-35KS-50-NCSM-VOLT-DIML2 1020-W-B1-10-LRTD4-9020-M2-35KS-50-NCSM-VOLT-DIML2 EDGR W 1/2 RMR EL EV6SA-2T8-8'-G*G-UNV-1C-W-QS 2-5104-24 2PM3N 2 32 G B 18LD MVOLT GEB10PS PWS1836 LP835 WGZ48 Z 2 32 MVOLT GEB10IS

OVER 2-1/2" 25GA. METAL STUDS @ 24" O.C. N.I.C. Scale: 1/4"=1'-0" Reflected Ceiling Plan MODEL NUMBER

ARMSTRONG 2'x2' DIRECT VOLTAGE UNV UNV UNV UNV UNV UNV FO32T8 35K (6) LAMP TYPE (4) (2) (2) FO32T8 LED LED FP14T5 FO32T8 35K 35K 35K -- WATTS 56.32 112.64 20 20 28 56.32 4 MOUNTING SURFACE RECESSED RECESSED RECESSED RECESSED RECESSED WALL NOTES

A-3.1 City of Miami Police Department +1 (305) 371 8400 Marine Patrol Office Miami, FL 33131

Watson Island 1 1001 MacArthur Causeway 03/14/2016 March 14, 2016 Miami, Fl, 33132 as shown cv/ga as/pp REFLECTED CEILING PLAN & NOTES ELECTRICAL LEGEND: WIRE REMOVAL 11. 10. 1. FOLLOW SAFETY PRECAUTIONS WHEN REMOVING OLD CABLE. ENSURE THAT WORKERS WEAR PROPER RESPIRATORY PROTECTION, REMOVE OLD CABLE. AS PER 2010 REVISIONS TO THE NATIONAL ELECTRICAL CODE, CABLE THAT IS NOT BEING USED OR * IMPORTANT GENERAL ELECTRICAL NOTES: WILL NOT BE USABLE IN THE FUTURE. REMOVE ALL CABLES WAY TO ELECTRICAL PANEL. 7. AND SEAL REMOVED CABLE IN PLASTIC BAGS. 6. 9. 8. 5. 3. 2. 4. PLAN NOTE: D CR C PLAN KEYED NOTES: J POKE - THROUGH OUTLET ASSEMBLIES. CONTRACTOR SHALL COORDINATE W/ BUILDING MANAGEMENT ALL LOCATIONS. PATCH AND REPAIR GYPSUM WALL BOARD AT ANY OUTLETS DELETED OR REMOVED. ENGINEERING AND/OR AV/LV DRAWINGS. DOCUMENTS FOR ADDITIONAL AND SPECIFIC INFORMATION. WITH BUILDING MANAGEMENT TO AVOID CAUSING INCONVENIENCE THE TENANTS ON LOWER FLOOR. THIS WORK WHEN FURNITURE IS INSTALLED AND "TIE-INTO" THE BUILDING POWER SIGNAL. COORDINATE LOCATION WITH FURNITURE VENDOR. GROUNDED OUTLETS TO BE LIMITED THREE PER CIRCUIT. CONTRACTOR TO PROVIDE ALL SWITCHES, COVER PLATES AND NEW ELECTRICAL FIXTURES, UNLESS OTHERWISE IS NOTED. ONLY CONTRACTOR TO PROVIDE ACCESSIBLE PULL RINGS AND STRINGS WITH COMPUTER AND TELEPHONE CABLING INSTALLATION BY TENANT. ALL OUTLETS TO BE LOCATED ACCORDINGLY SPECIFICATIONS ON ASSOCIATED ENGINEERING DRAWINGS. ALL SWITCHES AND COVERS SHALL BE SCREWLESS DECORA LEVITON WHITE; COORDINATED LOOK WITH LUTRON COVER PLATES. "D" DENOTES DEDICATED CIRCUIT. GC TO REFER ENGINEERING DRAWINGS. ALL RECEPTACLES SHALL BE MOUNTED 18" A.F.F., UNLESS OTHERWISE NOTED ON THIS PLAN. SHALL BE COMPLETED DURING OFF HOURS OR WEEKEND AS SUGGESTED BY THE BUILDING MANAGEMENT. TO THE FLOOR SLAB. ALL WORK INVOLVING INSTALLATION OF POKE THROUGH ASSEMBLIES SHALL BE CLOSELY COORDINATED SCREWLESS PLATES ARE ACCEPTABLE. COLOR WHITE. THIS PLAN IS FOR LOCATION PURPOSES ONLY, REFER TO ENGINEER'S IF APPROVED BY MANAGEMENT, ALL LOCATIONS SHALL BE SUBJECT TO X-RAY VERIFICATION AVOID STRUCTURAL DAMAGE GC TO COORDINATE WITH TENANT'S SECURITY VENDOR. GC TO PRICE ELECTRIC STRIKE LOCKSET AS AN ADD-ALT #2 FOR MAIN ENTRY DOOR. GC TO PRICE MAGLOCK AS AN ADD-ALT #1 FOR MAIN ENTRY DOOR. GC TO COORDINATE FOR DOOR MONITOR/CAMERA WITH TENANT'S SECURITY VENDOR. NEW SYSTEM FURNITURE WITH OVERHEAD STORAGE BY TENANT. FOR NEW CARD KEY SYSTEM BY FRONT DOOR; BUZZER ACCESS AT RECEPTION DESK. NEW CARD KEY PROVIDED AT ENTRY SUITE DOOR. (BY OTHERS) GENERAL CONTRACTOR TO PROVIDE CONDUIT & PULL STRING GC TO COORDINATE PROPER SUPPORT FOR TV BY TENANT. ENGINEERING DRAWINGS FOR POWER REQUIREMENTS IN ORDER TO PROVIDE A CORRECT SIZE OF ELECTRICAL CONDUITS & LOCATIONS. PROVIDE HEAVY DUTY BACKING IN WALL AS REQUIRED FOR MILLWORK SUPPORT. CONTRACTOR MUST PROVIDE A RECESSED WATER LINE AT REFRIGERATOR LOCATION. G.C. MUST PROVIDE POWER TO FEED WORKSTATIONS OUTLETS. (FURNITURE MOUNTED & DATA). REFER FURNITURE VENDOR WHEN FURNITURE IS INSTALLED AND "TIE-INTO" THE BUILDING POWER SIGNAL. COORDINATE LOCATION WITH FURNITURE VENDOR. 1. (CORE DRILL LOCATION TO BE DETERMINED BY FURNITURE VENDOR.) DUAL FUNCTION FLOOR BOX WHIP CONTAINING POWER/DATA/AV CAPABILITY AND LINKED TO WALL-MOUNTED TV OR SCREENS. REFER REQUIREMENTS.(CORE DRILL LOCATION TO BE DETERMINED BY FURNITURE VENDOR.) REQUIREMENTS. COORDINATE LOCATION W/FURNITURE VENDOR, OR TENANT'S AV AND LV CONSULTANTS AND/OR FLOOR BOX WHIP CONNECTION FOR TELEPHONE/ DATA/ POWER. REFER TO ENGINEERS DRAWINGS POWER DUPLEX POWER VOICE/DATA OUTLET ELECTRICAL QUADRAPLEX OUTLET DEDICATED DUPLEX POWER RECEPTACLE ELECTRICAL DUPLEX OUTLET WALL "J" BOX FOR POWER (WHIP SYSTEM FURNITURE) CARD READER QUAD FACE OUTLET 3. 2. WALL QUAD CONDUIT FOR DATA & TELEPHONE (WHIP SYSTEM FURNITURE) +65" A.F.F. WALL MOUNTED COAXIAL CABLE TV OUTLET POWER AND DATA VOICE/DATA VC CAMERA MOUNTED @ 48" A.F.F. ON CENTER BELOW TV DISPLAY UNIT OPENING. REFER TO ELEVATIONS. AV AND LV CONSULTANTS AND/OR REQUIREMENTS. TO ENGINEERS DRAWINGS FOR POWER REQUIREMENTS. COORDINATE LOCATION W/FURNITURE VENDOR, OR TENANT'S SINGLE TELEPHONE / FAX OUTLET -2-CAT 5e DO NOT DUPLICATE THE ELECTRICAL POWER. EXISTING ELECTRICAL POWER IN THIS SPACE. CONTRACTOR SHALL USE OR RETROFIT THE POWER. G.C. TO COORDINATE FINAL TV LOCATION WITH TENANT PRIOR STUB UP /WIRING CONDUITS. ALL FORFEITURES ARE FREE STANDING & SUPPLIED BY TENANT. FURNITURE TO CONFORM TO F.A.C. 2010 REQUIREMENTS. SYSTEM FURNITURE BY TENANT. G.C. SHALL HAVE AN ELECTRICIAN ON SITE FURNITURE SYSTEM BY TENANT. CONTRACTOR SHALL HAVE AN ELECTRICIAN ON SITE E= DENOTES EXISTING N= DENOTES NEW 3 4 " CONDUITS UNLESS OTHERWISE NOTED BY THE 1 EQUIPMENT SCHEDULE AND NOTES: PTOWD1 TOIPD1 FAUC2 FAUC1 MIR1 TOI1 SK2 SHR REF SK1 ID DESCRIPTION PAPER TOWEL DISPENSER TOILET PAPER DISPENSER 24"X36" MIRROR (BREAK ROOM) (BREAK ROOM) (BREAK ROOM) REFRIGERATOR (RESTROOM) (RESTROOM) (RESTROOM) (RESTROOM) (RESTROOM) (RESTROOM) SHOWER FAUCET FAUCET BY GC TOILET SINK SINK NOTES: FINISH: NOTES: FINISH: NOTE: FINISH: NOTE: FINISH: NOTE: FINISH: NOTE: FINISH: NOTE: FINISH: MODEL: MFG: MODEL: MFG: MODEL: MFG: MODEL: MFG: MODEL: MFG: MODEL: MFG: MODEL: MFG: NOTE: FINISH: NOTE: FINISH: MODEL: MFG: MODEL: MFG: NOTE: FINISH: MODEL: MFG: MANUFACTURER/MODEL B-262 BOBRICK B-4288 BOBRICK B-290 2436; 24"X36" BOBRICK WELDED-FRAME MIRROR POLISHED CHROME BCI2353916 KOHLER MOXIE COLLECTION GC TO INSTALL AS PER MANUFACTURER'S SPECIFICATIONS. GC TO INSTALL AS PER MANUFACTURER'S SPECIFICATIONS. GC TO INSTALL AS PER MANUFACTURER'S SPECIFICATIONS. GC TO COORDINATE POWER/WATER LINE LOCATION IN FIELD. WALL HUNG AS PER MANUFACTURER'S INSTRUCTIONS. WHITE WHITE 2988.101.020 0321026.020 AMERICAN STANDARD AMERICAN STANDARD SURFACE MOUNTED AS PER MANUFACTURER'S INSTRUCTIONS. STAINLESS STEEL SURFACE MOUNTED AS PER MANUFACTURER'S INSTRUCTIONS. STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL TBD SIDE-BY-SIDE REFRIGERATOR LUSTERSTONE ELUHAD1116 ELKA PULLOUT SPRAY SINGLE LEVER W/ HOT & COLD WATER CONCETTO 32138; PROVIDE LOW FLOW KIT 1.5 GPM. GROHE 5" DEPTH. VERIFY ADA CLEARANCE 32138 EN1 BRUSHED NICKEL POLISHED CHROME STAINLESS STEEL GC TO INSTALL AS PER MANUFACTURER'S SPECIFICATIONS. AMERICAN STANDARD SERIN MONOBLOCK 2064.101.002 *SHADED AREA DENOTES NOT IN CONTRACT Scale: 1/4"=1'-0" Electrical Location Plan Partial Ground Floor Scale: 1/4"=1'-0" Electrical Location Plan 1

A-4.1 City of Miami Police Department +1 (305) 371 8400 Marine Patrol Office Miami, FL 33131

Watson Island 1 1001 MacArthur Causeway 03/14/2016 March 14, 2016 Miami, Fl, 33132 as shown cv/ga as/pp ELECTRICAL LOCATION PLAN & NOTES . T N

FINISH NOTES: E S N O C FINISH SCHEDULE AND NOTES: 1. SUBMIT (2) SAMPLES OF ALL MATERIALS/FINISHES FOR ARCHITECT APPROVAL BEFORE N E T

ORDERING AND (1) FOR CLIENT APPROVAL. T

ID DESCRIPTION MANUFACTURER/MODEL I R W 2. ITEMS NOTED AS SUCH SHALL BE PURCHASED DIRECTLY BY OWNER AND SUPPLIED TO MFG: ULINE GARAGE FLOOR MAT D

CONTRACTOR FOR INSTALLATION. CONTRACTOR SHALL PROVIDE OWNER WITH QUANTITIES RUBBER MAT E NUMBER: H-3154 S S

OF THESE MATERIALS REQUIRED FOR ORDERING. RT1 FLOORING COLOR: BLACK E R

(BLACK) P 3. INSTALL ALL MATERIALS IN ACCORDANCE WITH MANUFACTURER'S PRINTED INSTRUCTIONS SIZE: 7.5'X17' X E

TO MAINTAIN PRODUCT PERFORMANCE WARRANTIES. NOTES: REFER TO MANUFACTURER'S SPEC FOR INSTALL. T U O

MFG: DALTILE H T

4. ALL FLOOR FINISHES AND BASE SHALL BE SUPPLIED AND INSTALLED BY GENERAL I

SIZE: TBD W CONTRACTOR. WHERE EXISTING FINISHES ARE TO REMAIN, G.C. SHALL PROTECT. CERAMIC TILE COLOR: TBD D CT1 E

(BATHROOMS) S

FINISH: MATTE U

5. THE GENERAL CONTRACTOR SHALL PROVIDE SAMPLES OF ALL FINISHES FOR ARCHITECT NOTES: REFER TO MANUFACTURER'S SPEC FOR INSTALL. E B

APPROVAL, UNLESS NOT PART OF THEIR SCOPE OF SERVICES. CONTACT: SANDRA TORRES HOLLAND @ KEYS GRANITE T O N FINISH INSTALLATION NOTES: EMAIL: [email protected] Llc# AA-26001740 L

MOBILE: 305-790-8266 L A H

SUBMITTALS: S 1428 Brickell Ave, Suite 202

MFG: BENJAMIN MOORE; AURA BASE D Miami, FL 33131 N A

SHOP DRAWINGS: ELECTRONIC COPY PAINT NUMBER: TBD O PRODUCT DATA: ELECTRONIC COPY P1 COLOR: TBD I +1 (305) 371 8400

(GENERAL) D

SUBMITTALS: ELECTRONIC COPY (PROVIDE ALL FINISH SUBMITTALS TO CLIENT FOR REVIEW & U

FINISH: EGGSHELL FINISH (524) @ GYP. WALLS, FLAT @ CEILINGS & SATIN AT T S

APPROVAL PRIOR TO ORDERING). DOORS, FRAMES & TRIMS. TYP. U.N.O. - G

FLOORING: NOTES: 2 COATS OF PAINT OVER PRIMER. FOR INTENSE COLORS PROVIDE / R E

ADDITIONAL COATS AS REQUIRED FOR FULL COVERAGE. N

1. CLEAN SUBSTRATE, FILL CRACKS, HOLES AND DEPRESSIONS AND LEVEL FLOOR WITHIN G I S

1/8"/10' BEFORE INSTALLING FLOOR COVERINGS. E

MFG: BENJAMIN MOORE; AURA BASE D

PAINT NUMBER: TBD F O

2. THE MOST INCONSPICUOUS MANNER BY SLOPING FROM THE HIGHEST TO LOWEST POINTS IN P1A (RESTROOMS) COLOR: TBD Y 03/14/2016 ALL DIRECTIONS WITH LATICRETE OR OTHER APPROVED METHOD AT A RATE OF 1/8" IN 10' T R

FINISH: EPOXY COATING. E

MAX. SLOPE. CONTRACTOR SHALL NOTIFY THE ARCHITECT HIS INTENDED METHOD BEFORE P 1

NOTES: 2 COATS OF PAINT OVER PRIMER. FOR INTENSE COLORS PROVIDE O

PROCEEDING WITH THE WORK. R

ADDITIONAL COATS AS REQUIRED FOR FULL COVERAGE. P

3. STONE OR PORCELAIN TILE FLOOR; INSTALLATION (MUD-SET FOR STONE/MARBLE THIN-SET PORCELAIN H T 1 TILE) AT FLOOR MAX. GROUT LINES 16" . IF FOR BUTT JOINT TILE INSTALL ADDITIONAL MUD SETTING IS E R

NEEDED, GC SHALL PROVIDE AT NO EXTRA COST. GC SHALL CONFIRM PRODUCT INSTALL WITH A

MFG: JOHNSONITE A

INSTALLER AND PRICE ACCORDINGLY PRIOR TO AWARD OF BID). FLOOR SUB CONTRACTOR TO MODEL: COVE BASE 4" I D COORDINATE INSTALLATION AND SHALL BE CONFIRMED WITH ARCHITECT. VB1 VINYL BASE COLOR: ICICLE 08 E M NOTE: REFER TO MANUFACTURER'S SPEC FOR INSTALL. C I

BASE: N O R

MFG: DALTILE T

VINYL BASE TO BE APPLIED IN SUCH A WAY AS TO ADHERE AS TIGHTLY AS POSSIBLE TO BOTH C SIZE: TBD E L

INSIDE AND OUTSIDE CORNERS, USING MANUFACTURER'S RECOMMENDED ADHESIVE. E COLOR: TBD CERAMIC TILE BASE / CTB1 S FINISH: MATTE PAINT: G N

NOTES: REFER TO MANUFACTURER'S SPEC FOR INSTALL. I W

FOR ALL INTERIOR GYPSUM BOARD WALLS AND CEILING 1 COAT PVA PRIMER AND SEALER, 2 CONTACT: SANDRA TORRES HOLLAND @ KEYS GRANITE A R

EMAIL: [email protected] D

COATS TOP PAINT. INTENSE COLORS SHALL REQUIRE ADDITONAL COATS AS NEEDED FOR FULL COVERAGE. .

MOBILE: 305-790-8266 N WALLS: R E V

MFG: FORMICA COLOR CORE 2 O G TILES (STONE OR PORCELAIN): THIN-SET, REFER TO DRAWINGS FOR SEAM ALIGMENT WITH PLASTIC LAMINATE STYLE: 933C-58 PL1 L ADJACENT FINISHES, GROUT LINES 1 L 16" MAX. (BREAKROOM) COLOR: MISSION WHITE (WHITE) MATTE 58 FINISH A H

NOTE: REFER TO MANUFACTURER'S SPEC FOR INSTALL. S CEILINGS: S N

MFG: MOCKETT O CONTACT ARCHITECT IMMEDIATELY SHOULD ANY CONFLICT BETWEEN THE REFLECTED I MODEL: DP54A-SSS 4" LONG S CABINET DOOR N CEILING DRAWINGS AND THE ACTUAL BUILDING CONDITIONS OR ENGINEERING DRAWINGS ARISE. E COLOR: SATIN STAINLESS STEEL PUL1 M MILLWORK: (TYPICAL) I NOTE: REFER TO ELEVATIONS FOR TYPICAL INSTALLATION. D

N E T

1. ALL WOOD MILLWORK SHALL BE FACTORY FINISHED AND COMPLY WITH AWI "PREMIUM GRADE" T I

STANDARDS, LATEST EDITION; ALL PLASTIC LAMINATE MILLWORK SHALL BE CUSTOM GRADE. SEE R W * ALL INTERIOR FINISHES TO BE CLASS A AS PER NFPA 101 PRE-QUALIFIED MILLWORK BIDDERS THIS PAGE. *SHADED AREA DENOTES NOT IN CONTRACT L L

** ALL PAINTS, CARPET GLUE, & WALLCOVERING GLUE (IF APPLICABLE) SHALL BE LOW ODOR AND LOW VOC. A

2. SHOP DRAWINGS AND FINISH SAMPLES FOR ALL MILLWORK AND DOORS SHALL BE SUBMITTED FOR ***WALLCOVERING GLUE (IF APPLICABLE) SHALL BE EASILY REMOVABLE SO THAT WALLCOVERING CAN BE S G

APPROVAL BEFORE ANY ITEM IS MANUFACTURED. EASILY REPLACED, IF NECESSARY. N I W A

3. THE MILLWORK CONTRACTOR SHALL OBTAIN AND VERIFY ALLL MEASUREMENTS AND CONDITIONS R

INTERIOR FINISH/FLAME SPREAD LIMITATIONS: D Finish Plan AT THE BUILDING AFFECTING HIS WORK AND SHALL BE RESPONSIBLE FOR ALL DETAILS AND E L

DIMENSIONS ASSURING PRECISION FITTING AND PROPER ASSEMBLY OF HIS PRODUCTS. OFFICE OCCUPANCY A Scale: 1/4"=1'-0" C S

BUILDING HAS A FULLY AUTOMATIC SPRINKLER SYSTEM T 4. THE EDGES OF COUNTER TOPS AND THE EDGES OF DOORS SHALL BE LAMINATED BEFORE THE O N COUNTER TOPS OR FACE OF DOORS ARE LAMINATED. O

SURFACE AREA FLAME SPREAD RATING D

. S

5. ALL FINISHES SHALL CONFORM TO APPLICABLE PORTIONS OF THE AWI STANDARD AND BE CONSISTENT E WALLS/CEILINGS EXITS CLASS A OR B I WITH THE APPROVED SAMPLES. C N

WALLS/CEILINGS A ACCESS TO EXITS CLASS A OR B P 6. ALL WORK SHALL BE ACCURATELY SET PLUMB, LEVEL AND SQUARE, SCRIBED TIGHTLY AND E R

WALLS/CEILINGS C

ACCURATELY TO ADJACENT SURFACES, SECURELY ANCHORED IN THE POSITION INDICATED ON OTHER SPACES CLASS A, B OR C S

DOOR JAMB I

DRAWINGS AND APPROVED SHOP DRAWINGS. D (IF APPLICABLE) FLOORS EXITS CLASS I OR II Y N A

7. COORDINATE INSTALLATION OF IN-WALL STEEL ANCHORAGES AND MISCELLANEOUS BLOCKING WITH

FLOORS ACCESS TO EXITS CLASS I OR II F O

OTHER CONTRACTORS FOR PRECISE LOCATION. DOOR IN CLOSED

SCHEDULED O FLOORS OTHER SPACES N/A POSITION OR CASED I D

8. MAKE ALL NECESSARY MODIFICATIONS IN THE FIELD TO ACCOMMODATE CONDUIT, PIPING, ETC. REDUCER STRIP U

OPENING T CLASS A FLAME SPREAD 0 - 25 CLASS I - .45 S (WHERE APPLICABLE) -

SCHEDULED G 9. REPAIR, REPLACE OR OTHERWISE MAKE GOOD ALL DAMAGE INCURRED TO REFINISHED CABINETRY CLASS II - .22 C CLASS B FLAME SPREAD 26 - 75 RUBBER L Y F

DURING HANDLING AND INSTALLATION. I CLASS C FLAME SPREAD 76 - 200. TILE FLOORING DOOR IN CLOSED T O N AS PER NFPA TABLE A-10.2.2, NFPA 2006 POSITION OR CASED OPENING 10. ADJUST DOORS, DRAWERS AND ALL HARDWARE FOR PROPER OPERATION AND CLEAN ALL SURFACES, L L

INSIDE AND OUTSIDE, OF ALL CABINETS. A

SCHEDULED H S

Watson Island Miami, Fl, 33132 1001 MacArthur Causeway City of Miami Police Department Marine Patrol Office TILE FINISH PLAN & NOTES D

11. ALL WOOD VENEER SHALL BE BOOK MATCHED ACROSS SEQUENCE FOR EACH LENGTH, UNLESS N A OTHERWISE NOTED. N O

MUDSET I T

12. ALL LAMINATES IN MILLWORK SHALL BE INSTALLED AS PER MANUFACTURER'S C

SCHLUTER - SCHIENE U

SPECIFICATIONS OVER 385(%21'+$5':22'3/<:22'3$1(/6 R T (CABINET-GRADE). S N O C 13. INTERIOR OF CABINETS SHALL BE COVERED W/ WHITE MELAMINE. SUBMIT SAMPLE RT1 to Tile H T

FOR ARCHITECT'S APPROVAL. I

1 W N.T.S. MILLWORK HARDWARE: G N I D E

HINGES; FRAMELESS CONCEALED, 170 DEGREES OF OPENING, SELF CLOSING. E C

SHELVES: OPEN CABINET SHELF SUPPORTS SHALL HAVE STEEL PINS. O R P

DRAWER SLIDES: FULL EXTENSION; HEAVY DUTY E

TAB PULS: DOUG MOCKETT DP3B; SATIN CHROME, 4" OR APPROVED EQUAL. R O

BAR PULLS: SUGATSUNE 26 SERIES; STAINLESS STEEL; 19-3/8" OR APPROVED EQUAL. F E B

LOCKS: COMP-X NATIONAL PIN TUMBLER DOOR & DRAWER LOCK, OR APPROVED EQUAL. S N O FABRIC PANELS: I T I D N

ALL FABRIC PANELS SHALL BE INSTALLED OVER 3/4" THICK WHITE RECORE O C SUBSTRATE AS SPECIFIED. D N A

S N O I S N E M I D

N A L P

L L A

Y F I

R scale: E as shown V

N release date: A

March 14, 2016 K

C drawn by: E

H as/pp C

L checked by: L

A cv/ga H S

R O T C A R T N O C

A-5.1 : E T

O SHEET NO. N . T N E S N O C

N E T T I R W

D E S S E V.I.F. R P X E

T U 1'-7" O H T

PUL1 I 2'-6" W

D E S U

E B

T O N Llc# AA-26001740 L L A H 2'-2" S 1428 Brickell Ave, Suite 202

D Miami, FL 33131 N A

O 6'-0" 6'-0" I +1 (305) 371 8400 5'-11" CLEAR CLEAR D U T S - G / R

WATER LINE E 2'-6" N G 2'-10" I 2'-6" S E D

F O

4" Y 03/14/2016 T R

2'-6" E 2" 3'-2" 2" 4 EQ. CABINETS P 1

CLEAR O R P

E H T 1 E R A Elevation @ Break Room 07 Elevation @ Break Room 07 Elevation @ Closet 01 Elevation @ Closet 01 A I

1 2 3 4 D SCALE: 1/2" = 1'-0" SCALE: 1/2" = 1'-0" SCALE: 1/2" = 1'-0" SCALE: 1/2" = 1'-0" E M

C I N O R T C E L E

/ S G N I W A R D

. N R E V O G

L L A H S

S N O I S N E M I D

N E T T I R W

L L REFER TO REFER TO A

. S G PRODUCT MANUAL PRODUCT MANUAL N I W A REFER TO R REFER TO D 3'-0" 3'-0"

E 40" MAX L 40" MAX REFER TO 34" MAX 34" MAX PRODUCT MANUAL 34" MAX 34" MAX A PRODUCT MANUAL 27" MIN. 27" MIN. C 27" MIN. 27" MIN. S

17"-19" T PRODUCT MANUAL 17"-19" O N

REFER TO SHEET A-2.1 REFER TO SHEET A-2.1 REFER TO SHEET A-2.1 D

REFER TO SHEET A-2.1 REFER TO SHEET A-2.1 REFER TO SHEET A-2.1 . S E REFER TO SHEET A-4.1 FOR REFER TO SHEET A-4.1 FOR REFER TO SHEET A-4.1 FOR REFER TO SHEET A-4.1 FOR REFER TO SHEET A-4.1 FOR REFER TO SHEET A-4.1 FOR I C

PLUMBING FIXTURE SPECS & PLUMBING FIXTURE SPECS & PLUMBING FIXTURE SPECS & PLUMBING FIXTURE SPECS & PLUMBING FIXTURE SPECS & PLUMBING FIXTURE SPECS & N A

ACCESSORIES. ACCESSORIES. ACCESSORIES. P

ACCESSORIES. ACCESSORIES. ACCESSORIES. E R C S I

1 D

Y N A

Elevation @ RR06 Elevation @ RR06 Elevation @ RR06 Elevation @ RR09 Elevation @ RR09 Elevation @ RR09 F O

5 6 7 8 9 10 O SCALE: 1/2" = 1'-0" SCALE: 1/2" = 1'-0" SCALE: 1/2" = 1'-0" SCALE: 1/2" = 1'-0" SCALE: 1/2" = 1'-0" SCALE: 1/2" = 1'-0" I D U T S - G

1'-2" Y F I T O N

L L A H S INTERIOR ELEVATIONS & DETAILS

Watson Island Miami, Fl, 33132 1001 MacArthur Causeway City of Miami Police Department Marine Patrol Office D N A

N O I T C U

PROVIDE BLOCKING AS REQ. R T S N O REFER TO ELEVATION C

H T

EDGE PULL AS SCHED. I W

SCHED. UNDER CABINET N 3" I LIGHTING D E E C

FINISH AS SCHED. O R P

FULL BACKSPLASH. E R

NO SIDESPLASH O F

VARIES, SEE PLANS E B

S N O SQUARE EDGE I T I

MITRE CORNER D N O C TYP. SPLASH,

DOOR PULL, BACK- D 1 1/2"

AS SCHEDULED N

ADA SINK A

S N O I S N

WHITE E M MELAMINE I

8" MIN. D INTERIOR N A L P

REQ'D. L L

CLEAR A 2'-10"

AREA F I R SEE ELEV. scale: E 2'-5" CLR. as shown V 1'-5" MIN. 3/4" PLAM DOOR (ALL 6 SIDES) USE D

3" PL FINISH AS SCHEDULED. N release date: A

March 14, 2016 K

6" C drawn by: ATTACH TOE KICK E MAX. TO DOOR. PROVIDE VENT H as/pp C 9"

MIN. CUTOUT FOR WATER CHILLER IMPORTANT NOTE: L checked by: L 4" FINISH FLOOR A cv/ga

´*&72$6685(7+$7$//7+(1(&(66$5<0$7(5,$/6$5(86('723523(5/<,167$//$//63(&,),('0$7(5,$/6 H S

0$.(685(7+$7¬SUBCONTRACTORS OBTAIN THE RECOMMEND INSTALLATION METHOD AND MATERIALS AS RECOMMENDED R O

%<($&+63(&,),('¬0$18)$&785(6µ T

SEE PLAN C A R

CONTRACTOR TO COORDINATE ALL POWER & PLUMBING REQUIREMENTS PROVIDED & INSTALLED BY CONTRACTOR T N

(VERIFY CLEARANCE FOR FULL OPENING BEFORE INSTALLATION) G.C. WILL BE RESPONSIBLE FOR OPEN REF. DOORS FULL O C

Section Detail Section Detail :

CLEARANCE. E

T A-6.1

O SHEET NO.

SCALE: 1" = 1'-0" SCALE: 1" = 1'-0" N