IBAK Sewer Inspection Systems Table of contents

Hindsight – Insight – Foresight...... 4 Cable drums and cable winches IBAK Sewer CCTV Systems...... 6 Extension Kit...... 42 IBAK HSP...... 44 Cameras IBAK KT 180...... 46 IBAK HYDRUS...... 8 IBAK KW 180...... 48 IBAK JUNO...... 10 IBAK KW 305/310/505...... 50 IBAK POLARIS...... 12 IBAK LISY winches...... 52 IBAK ORION 2.7...... 14 IBAK ORION 2.6 L...... 16 Compact push systems IBAK ORPHEUS...... 18 IBAK MiniLite...... 54 IBAK ARGUS 5...... 20 IBAK MobiLite...... 56 IBAK PEGASUS HD...... 22 IBAK CERBERUS...... 24 Control units / systems IBAK RETRUS...... 26 IBAK BK 3.5.1...... 58 IBAK BS 3.5 / BS 7...... 60 Tractors IBAK BS 5...... 62 IBAK T 66...... 28 IBAK T 76 / T 76 HD...... 30 Accessories IBAK T 86 / T 86 HD...... 32 IBAK PHOBOS...... 64 IBAK LISY 3...... 34 IBAK ILP...... 66 ARGO 2...... 68 Camera systems Sample expansions: Vehicles...... 69 IBAK PANORAMO...... 36 IBAK PANORAMO 150...... 38 Organised sewer reparation IBAK PANORAMO SI...... 40 Electric cutting and grinding with IBAK Robotics products ...... 70

– 3 – Hindsight – Insight – Foresight

We've seen each other before... Count on IBAK IBAK products work in the dark, but their success is visible. Throughout the world operators With their high quality standards, IBAK products are always a safe investment. Despite the use the innovative sewer inspection system by this Kiel-based market leader. IBAK's pres- exceptional characteristics of our products, economic factors have always been decisive. ence is felt all over the globe. Protect the environment IBAK's invention Just as every department of IBAK is governed by a strict environmental management system When the company founder Helmut Hunger set up his business "Ingenieur Büro Atlas Kiel" to protect natural resources, so also do IBAK's inspection systems contribute to environmen- in 1945, he did not give a thought to going global. It was his personal quest to develop per- tal protection. IBAK systems detect damage in fresh water pipes and sewers, thus helping to fectly functioning precision instruments. Even today IBAK is just as passionate about meet- protect our valuable drinking water for the future. ing those targets. Finding innovative and user-friendly solutions is always the company's prime objective. It thus comes as no surprise that the IBAK organization, after many years The extraordinary driving experience of research and development, presented the first sewer TV inspection system in the world When talking about innovation, that is where the PEGASUS HD camera, with both its fully in 1957. HD high-resolution and the brilliant picture it produces, as well as the digital PANORAMO sewer inspection system shine brightest. Driving through the world of sewers with the From human to human PANORAMO is a unique 3D experience. Analysis of the entire inspection data is not carried Products by IBAK are technological masterpieces. And with one in six of our over 260 col- out in the inspection vehicle on-site as was previously the case. Instead it is analysed in the leagues working in research and development, that is no wonder. Our highly experienced comfort of the office, although the feeling of working with a pan and tilt camera in the pipe engineers, the continuous exchange of ideas with customers and the well-established coop- remains. eration with universities and professional bodies all ensure the development of trend-setting technologies and their conversion into practical designs. The result is that IBAK systems are powerful, durable, user-friendly, low-maintenance, high-tech solutions.

Quality shows What started in Kiel is now well known throughout the world. Just as every year Kiel wel- comes the world for its "Kieler Woche" – the biggest sailing event in the world – IBAK sets its course for more than 40 countries. All IBAK products have one thing in common: they provide 'made in Germany' quality. All system components as well as the hardware and software are developed, produced, assembled and tested by IBAK. Relevant standards, such as ISO, DIN, all EC Directives as well as ATEX and IECEx certificates of quality, constitute merely the mini- mum requirements for us.

– 4 – – 5 – MODULAR IBAK Sewer CCTV Systems SYSTEM*

Cameras Tractors Camera systems Cable drums and cable winches Compact push systems Software

HYDRUS HSP DN 50 and up Camera cable up T66 PANORAMO®150 IIKAS 32 / IKAS evolution to 60 m MiniLite DN 100 and up DN 150 and up DN 50 and up

JUNO KT 180 DN 100 IKIS and up Camera cable up to 200 m

POLARIS MobiLite ® DN 50 and up DN 100 and up T76/ T76 HD PANORAMO KW 180 DN 200 and up IMBA 32 DN 150 and up Camera cable up to 200 m

ORION® DN 100 and up KW 305/310 Camera cable

® up to 300 m Control units/systems Vehicles ORION®L PANORAMO SI DN 200 and up DN 100 and up T86 / T86 HD CLASSIC LINE manhole inspection DN 200 and up KW 505 Camera cable ORPHEUS® up to 600 m BK 3.5.1 DN 150 and up LISY 3 DN 150 and up KW LISY Synchron ARGUS®5 Camera cable up to 180 m DN 200 and up BS 3.5 / BS 7 TOP LINE

KT 220 PEGASUS HD Camera cable DN 200 and up * IBAK sewer inspection systems are modular in design; they can be configured up to 130 m BS 5 according to the requirements and the field of application. The cameras are compatible with the tractor range or pushrod systems. Diverse CERBERUS cable winches and control units round this flexible system off. KW 104/204 Inspection of Camera cable main sewers up to 200 m BP 4

– 6 – – 7 – IBAK HYDRUS Technical system data 1. Camera specification Axial camera Axial camera Inspection range DN 50 and up Inspection range DN 50 / DN 70 and up Dimensions Ø 41 mm / length 145 mm Weight approx. 135 g Push operation yes Tractor operation no Upright picture control no Correctly oriented image no Zoom no F (shutter) 2.0 f (focal length) (mm) 2.5 Lighting 36 white LEDs, controllable Light sensitivity (lux) 0.1 lux (F 2.0, 1/50 s) Luminous intensity (lumen) 80 lm Protection class IP 68 2. 3. Permissible ambient tempera- C – +40°C during operation; ture -30°C – +70°C for storage Test pressure 1 bar Pressure monitoring no fixed shutter, automatic elec- Shutter function tronic shutter Panning range axial view The IBAK HYDRUS is a small inspection camera with bending capa- IBAK HYDRUS 1 angle of aperture approx. 107° diagonally bility for push operations. It is available in two versions: as a com- Complete system with MiniLite, MobiLite or HSP 40/60 Angle of rotation - plete system with coiler and as a plug-in version. With their small The compact complete system from IBAK includes the HYDRUS 1, Focus function / range 5 cm - 15 cm, fixed diameter, both models are ideal for use in supply pipes within a build- firmly mounted onto the push rod of the MiniLite and MobiLite push Sensor (inch) 1 / 4" ing. With the HYDRUS complete system inspections are possible camera systems or onto the HSP 40 / 60 cable drum. It holds 30 m 1. IBAK HYDRUS 2 with camera guide device for DN 100 TV standard NTSC or PAL in DN 50 pipes and up, with the plug-in component inspections are of "Magic Push Rod" (guide hose with camera cable and push rod). 2. IBAK HYDRUS, LED lighting and screwable protective housing Horizontal image resolution 460 Lines PAL possible in DN 70 pipes and up. Thanks to its flexibility, the HYDRUS Its flexibility is ideally adjusted to its nominal operational diameter of 3. IBAK HYDRUS 1 on the MiniLite Integrated laser no can be easily pushed through a number of consecutive bends; the in- DN 50 upwards. 4. IBAK HYDRUS 2 tegrated and controllable LED lighting illuminates the area of inspec- Integrated detector transmitter no tion in an optimal way. IBAK HYDRUS 2 Explosion protection no Pluggable pushrod camera The pluggable HYDRUS 2 fits onto the MiniLite and MobiLite com- Combinable with pact push camera systems or onto the IBAK HSP 40 and HSP 60 4. IBAK coilers / winches all cable reels. The HYDRUS 2 completes the modular diversity of IBAK IBAK push systems all camera systems for the use in areas with small pipe diameters. IBAK control systems all HYDRUS 2 has the same plug connection as IBAK JUNO, ORION, ORION L and POLARIS so that existing IBAK systems can be opti- Accessories (optional) mally complemented. Camera guide device DN 100 and up Ancillary light –

– 8 – – 9 – Technical system data IBAK JUNO Camera specification Axial camera Axial camera Inspection range DN 100 and up Inspection range DN 100 and up Dimensions Ø 60 mm / length 100 mm Weight approx. 500 g Push operation yes Tractor operation yes Upright picture control yes Correctly oriented image no Zoom no F (shutter) 2.0 f (focal length) (mm) 2.5 Lighting 56 white LEDs, controllable Light sensitivity (lux) 1 lux (F 1.8, 1/50 s) Luminous intensity (lumen) 125 lm Protection class IP 68 Permissible 0°C – +40°C during operation ambient temperature -30°C – +70°C for storage Test pressure 1 bar Pressure monitoring 2 integrated pressure sensors 1) fixed shutter, Aperture function automatic electronic shutter Panning range axial view IBAK JUNO is a versatile axial camera for inspections of pipes of DN 100 and up. Angle of aperture approx. 107° diagonally Thanks to the UPC function (Upright Picture Control), the image it provides is always upright. Angle of rotation Continuous The integrated high-performance LEDs give the ideal illumination, thus providing the best Focus function / manually 1 cm – ∞, remote- possible visibility during the inspection. range controlled in endless operation The locating transmitter determines the position of the camera quickly and conveniently and Sensor (inch) 1 / 4" also localises any damaged areas identified. The transmitter can be switched off so errone- TV standard NTSC or PAL ous findings due to the reception of external signals are avoided. Horizontal image resolution 460 Lines PAL The internal pressure monitoring ensures safe operation of the camera system. Integrated laser no JUNO can be used during push operations with IBAK's HSP 40 and 60 reels, with the push Integrated detector trans- rods of IBAK LISY (KT220 / LISY Synchron winch) as well as with the compact pushrod cam- yes mitter era systems MiniLite and MobiLite. In tractor operation, JUNO can be used with all IBAK Explosion protection no camera tractors.

Combinable with IBAK tractors all IBAK push systems all IBAK coilers / winches all IBAK control systems all

Accessories (optional) Camera guide device DN 150 and up Ancillary light ZSW 65, ZSW 75

1) LCD indicator and acoustic alarm in the control unit – 10 – – 11 – Technical system data IBAK POLARIS Inspection range DN 100 and up Ø 60 mm / Length 285 mm Pan and tilt camera Dimensions Inspection range DN 100 and up (bendable) Material Anodised aluminium Weight approx. 0.8 kg Push operation yes Tractor operation no Upright picture control yes Zoom no F (shutter) 2 f (focal length) (mm) 3.8 Lighting 4 white power LEDs Automatic return to yes zero function Light sensitivity (lux) 0.2 lux (F 2.0, 1/50 s) Luminous intensity (lumen) 440 lm Protection class IP 68 Permissible 0°C – +40°C during operation ambient temperature -30°C – +70°C for storage Test pressure 1 bar Pressure monitoring 2 integrated pressure sensors1) Fixed shutter, electronic shutter Aperture function The IBAK POLARIS pushrod camera was designed to satisfy the The camera has an automatic joint inspection function (360°). The IBAK POLARIS – The benefits with remote control demand for a bend capable camera suitable for bends of 90° with a iswitch function always provides for an upright picture during joint Panning range + / -120° 100% field of view. The POLARIS has been developed into a pan and inspection. This facilitates orientation in the pipe and helps you to at a glance Viewing range + / -150° tilt camera capable of working in pipes of DN 100 and up. work more efficiently. Two pre-settable focus-point save points make Angle of aperture approx. 68° diagonally The POLARIS is our new divertable camera for branched pipes from The camera‘s position at the very front of the device means that no the joint inspection panning process even more convenient. Since infinite (infinite rotation of camera DN100 upwards. Angle of rotation precision guide is visible in the images shown during inspections. frequent refocusing is no longer necessary, the user can reach the head around its own axis) manually 1 cm – ∞, can be operated The POLARIS is compatible with IBAK‘s LISY satellite system and targeted position even faster. n 360° panning to inspect joints Focus function / range with the MiniLite and MobiLite pushrod camera systems. n 100% free field of view by remote control n Automatic return to zero function Sensor (inch) 1 / 4" n Programmable approach to viewing positions TV standard NTSC or PAL n Inspection without water-jet driving possible Horizontal image resolution 420 Lines PAL n Provides an alternative to the ORION and ORION L Integrated laser yes n With panning and tilting function Explosion protection optional n Panning range +/- 120° Bending device yes, steerable camera boom n Viewing angle +/- 150° Bend capability 87° in DN 100 and up n High-performance Power-LED lighting Integrated detector trans- yes, frequency range 33 kHz, n Upright picture control in push operation mitter switchable n Upright picture control during joint inspection (using the iswitch function) Combinable with n Integrated location transmitter IBAK coilers / winches all (can be operated by remote control) IBAK push systems all n Explosion protection optional IBAK control systems from BK 3.5 upwards, all BS n Interior pressure monitoring n Laser measurement 1) LCD indicator and acoustic alarm in the control unit – 12 – – 13 – IBAK ORION 2.7 Technical system data 1. Camera specification Pan and tilt camera Pan and tilt camera Inspection range DN 100 and up Inspection range DN 100 and up Dimensions Ø 60 mm / length 100 mm Weight approx. 500 g Push operation yes Tractor operation yes Upright picture control yes Correctly oriented image no Zoom 3x digital F (shutter) 3.5 f (focal length) (mm) 3.0 Lighting 40 white LEDs, controllable Light sensitivity (lux) 0.1 lux (F 2.0, 1/50 s) Luminous intensity (lumen) 90 lm Protection class IP 68 Permissible 0°C – +40°C during operation ambient temperature -30°C – +70°C for storage Test pressure 1 bar Pressure monitoring 2 integrated pressure sensors 1) Fixed shutter, electronic Aperture function shutter with remote control Panning range + / -120° The IBAK ORION is the all-rounder when it comes to the inspection Depending on the field of application, the IBAK ORION 2.7 is avail- 2. Angle of aperture approx. 90° diagonally of pipes of DN 100 and up. Every required viewing range is reached able with or without explosion protection. Using the integrated loca- Viewing range + / -155° rapidly by the microprocessor controlled pan and tilt head. ORION tion transmitter, the camera’s position can be determined at any time. Angle of rotation continuous 2.7 can rotate endlessly around its own axis. By means of the pan The in-built laser (2.7) in combination with the IKAS software allows manually 1 cm – , remote-con- Focus function / range ∞ function it is possible to view in all directions and even to view "back- you to make easy diameter and deformation measurements while 3. trolled in endless operation wards" into the branch when automatically panning to inspect pipe inspecting the sewer pipe. Sensor (inch) 1 / 4" joints. The ORION 2.7 provides in the axial view an upright image The housing made of aircraft aluminium offers resistance to high TV standard NTSC or PAL thanks to its UPC function (Upright Picture Control). With its small pressures and a very light weight. These combined qualities allow Horizontal image resolution 570 Lines NTSC / 560 Lines PAL diameter of 60 mm, the camera can be connected to all IBAK cam- long travel distances in push operation, and provide maximum cam- Integrated laser yes era tractors and has also full bend capability when operated as push era robustness at the same time. High-strength materials, which are Integrated detector transmitter yes camera. required for the explosion resistance impact test, are used in explo- Explosion protection optional The system is protected by an internal operating pressure of 1 bar sion-safe and non-explosion-safe cameras. and internal pressure monitoring – in case of a pressure drop the inspector receives a warning signal on the LCD display and a warn- Combinable with ing tone in the control unit. If the customer requires, IBAK can also IBAK tractors all deliver the ORION models with increased pressure resistance. IBAK coilers / winches all The latest camera model, the IBAK ORION 2.7, provides a large angle IBAK push systems all of aperture, excellent light sensitivity and 3x zoom. Furthermore, its 1. Pan and tilt camera IBAK ORION IBAK control systems from BK 3.2, BE 3.2, all BS focus depth is remarkable. Due to its enhanced features, the camera 2. ORION and ancillary light ZSW 65 is also ideally suited for the inspection of larger pipes. Inspections up 3. Remote-controlled focus function and 40 controllable LEDs Accessories (optional) to DN 600 can be carried out without the need for additional lights 4. Laser supported diameter and deformation measurement (2.7) Camera guide device DN 150 and up with the ORION 2.7. 4. ZSW 65 for DN 200 and up Ancillary light ZSW 75 for DN 300 and up

– 14 – 1) LCD indicator and acoustic alarm in the control unit – 15 – Technical system data IBAK ORION 2.6 L Camera specification Pan and tilt camera Pan and tilt camera Inspection range DN 100 and up Inspection range DN 100 and up Dimensions ø 60 mm / length 100 mm Weight approx. 500 g Push operation yes Tractor operation yes Upright picture control yes Correctly oriented image no Zoom 3x digital F (shutter) 3.5 f (focal length) (mm) 3.0 Lighting 40 white LEDs, controllable Light sensitivity (lux) 0.1 lux (F 2.0, 1/50 s) Luminous intensity (lumen) 90 lm Protection class IP 68 Permissible 0°C – +40°C during operation ambient temperature -30°C – +70°C for storage Test pressure 1 bar Pressure monitoring 2 integrated pressure sensors 1) Fixed shutter, electronic shutter Aperture function with remote control Panning range +/- 45° 2), +120°/- 45° 3) In heavily branched networks, a special version of the IBAK ORION This camera, which can be deployed in DN 100 and up, has all the Angle of aperture approx. 90° diagonally pan and tilt camera is used: the IBAK ORION L. identifiable ORION features: full rotatability of the camera head, Viewing range +155°/-75° 2), +/-155° Its guide unit, the "Kiel rod", can be panned and rotated in all direc- remote-controlled operation of the viewing direction and all func- Angle of rotation continuous tions and guides the camera smoothly into the target pipe. Its fast tions of the lens system and internal pressure monitoring. Specially manually 1 cm – , remote- direction-changing function and mechanical sturdiness set the arranged LEDs provide excellent illumination of the inspection area Focus function / range ∞ controlled in endless operation ORION L apart from other divertable camera systems for the inspec- and ensure a superb picture that shows up even the smallest defects. Sensor (inch) 1 / 4" tion of house drains. The ORION 2.6 L provides an upright image in the axial view thanks TV standard NTSC or PAL The ORION 2.6 L has been available since the beginning of 2012 with to its UPC function (Upright Picture Control). Horizontal image resolution 570 Lines NTSC / 560 Lines PAL larger angle of aperture, a 3x digital zoom, and increased light sensi- The IBAK ORION L can be modularly connected to all IBAK push rods tivity. The new version now also has improved image quality. and is particularly effective in combination with the LISY 3 satellite Integrated laser no Integrated detector trans- systems. An explosion-safe model is also available. In short, it is user- yes mitter friendly, robust and low-maintenance – like all IBAK cameras. Explosion protection optional

Combinable with IBAK tractors all IBAK push systems all IBAK coilers / winches all IBAK control systems from BK 3.2, BE 3.2, all BS

Accessories (optional) Camera guide device DN 150 and up

1) LCD indicator and acoustic alarm in the control unit 2) with rod, dependent on pipe diameter – 16 – 3) without rod and holder, on camera tractor – 17 – IBAK ORPHEUS Technical system data Camera specification Pan and tilt camera Pan and tilt camera Inspection range DN 150 and up Inspection range Dimensions Ø 96 mm / length 160 mm DN 150 and up Weight approx. 1.6 kg Push operation no Tractor operation yes Upright picture control no Correctly oriented image no Zoom 10x optical; 4x digital zoom optional F (shutter) 1.8 to 2.9 f (focal length) (mm) 4.2 to 42 Lighting 88 white LEDs, controllable Light sensitivity (lux) 1.5 lux (F 1.8, 1/50 s) Luminous intensity (lumen) 200 lm 1. ORPHEUS on camera tractor T76 Protection class IP 68 2. ORPHEUS and manhole adapter Permissible 0°C – +40°C during operation ambient temperature -30°C – +70°C for storage 3. ORPHEUS on T76 with ancillary light and tractor tyres Test pressure 1 bar 4. ORPHEUS on T76 with granulated wheels Pressure monitoring 2 integrated pressure sensors1) manually, automatic, can be oper- Aperture function ated by remote control Panning range + / -120° Angle of aperture approx. 60° diagonally IBAK ORPHEUS is a pan and tilt camera for DN 150 pipes and up. It The integrated light-emitting diodes, which are protected by impact- Viewing range + / -150° combines the proven functionalities of the IBAK ORION, such as full resistant, transparent caps, ensure excellent illumination in all envi- Angle of rotation continuous rotatability of the camera head and automatic joint inspection, with a ronments. Thus, the ORPHEUS covers a wide inspection area opti- manually, one-push autofocus, zoom lens and laser reference measurement. mally when used with medium diameter pipes. Focus function / range 1 cm – ∞, can be operated by re- Two integrated lasers enable defect measurements to be performed Integrated sensors for pressure monitoring and optional explosion mote control easily in combination with IBAK's IKAS software. The 10x optical protection reliably ensure the safety of the equipment and the site Sensor (inch) 1 / 4" zoom and the automatic return to zero function round off the cam- of operation. TV standard NTSC or PAL era's functions. The IBAK ORPHEUS is a modular unit and can be mounted on the Horizontal image resolution 460 Lines PAL IBAK camera tractors or on a manhole adapter. Integrated laser yes Integrated detector optional transmitter Explosion protection optional 1. 2. 3. Combinable with IBAK tractors all IBAK control systems from BK 3.2 upwards, BE 3.2, all BS

Accessories (optional) Manhole adapter yes Ancillary light ZSW 75 4.

UPC = Upright Picture Control 1) LCD indicator and acoustic alarm in the control unit

– 18 – – 19 – Technical system data IBAK ARGUS 5 1. Camera specification Pan, tilt and rotate camera Pan, tilt and rotate camera Inspection range DN 200 and up Inspection range DN 200 and up Dimensions ø 120 mm / length 195 mm Weight approx. 3.5 kg Push operation no Tractor operation yes Upright picture control yes Correctly oriented image yes 10x optical; Zoom 4x digital zoom optional F (shutter) 1.8 to 2.9 f (focal length) (mm) 4.2 to 42 8 white power LEDs, 6 white 5 mm Lighting LEDs for illuminating joint gaps Light sensitivity (lux) 1.5 lux (F 1.8, 1/50 s) Luminous intensity (lumen) 1600 lm Protection class IP 68 Permissible 0°C – +40°C during operation ambient temperature -30°C – +70°C for storage Test pressure 1 bar Pressure monitoring 2 integrated pressure sensors1) manually, automatic, can be oper- Aperture function The IBAK ARGUS 5 is a pan, tilt and rotate camera that can be The integrated, adjustable high-power LEDs assure optimum illumi- ated by remote control adapted to the required settings for each specific inspection at the nation at both close and long range. They also make it possible to 2. Panning range + / -120° push of a button. Thus, pan mode (direction of view: right/left, e.g. for inspect larger diameter pipes without the need for additional lighting. Angle of aperture approx. 60° diagonally lateral service connections) or tilt mode (direction of view: up/down, The left and right-hand lighting units can be switched on and off sepa- Viewing range + / -150° e.g. for pipe inverts) can be accessed using the preselect button. The rately* and follow the movements of the camera head, thus making Angle of rotation continuous other selectable functions "45° angle of view*", "90°angle of view" it easier to identify defects clearly and to distinguish them from e.g. manually, one-push autofocus, Focus function / (both of which settings are available in all directions: right / left / up / grout shadows. With its integrated joint gap lighting, which can be 1 cm – , can be operated by re- range ∞ down), "reset" and "automatic joint inspection" ensure highly efficient switched on when required, and the automatic joint inspection func- mote control inspection procedures. tion, the ARGUS certainly lives up to its name. Sensor (inch) 1 / 4" With the ARGUS 5, the camera picture always stays right-side up IBAK has optimised the advantages of automatic focussing with TV standard NTSC or PAL and correctly oriented thanks to the ROTAX panning mechanism, its innovative "one-push autofocus": whenever the camera head Horizontal image resolution 460 Lines PAL even when the camera head is panned, tilted or rotated. This in turn changes position or returns to the default position, the autofocus Integrated laser yes helps orient the user. only needs to be triggered once and immediately generates a sharp Integrated detector trans- no picture. mitter In combination with IBAK's IKAS software, the integrated laser en- Explosion protection optional ables you to perform diameter, deformation and defect measure- 3. ments easily during sewer inspections. Combinable with IBAK tractors all 1. IBAK ARGUS 5 on T76 with tractor tyres IBAK control systems from BK 3.2 upwards, BE 3.2, all BS 2. IBAK ARGUS 5 on T 86 with ovoid pipe device 3. IBAK ARGUS 5 with its high-power LEDs in operation 1) LCD indicator and acoustic alarm in the control unit * only BS 5

– 20 – – 21 – Technical system data IBAK PEGASUS HD Camera specification Pan and tilt camera Pan and tilt camera Inspection range DN 200 and up Inspection range DN 200 and up Dimensions ø 120 mm / length 195 mm Weight approx. 3.5 kg Push operation no Tractor operation yes Upright picture control yes Correctly oriented image - Zoom 10x optical; 4x digital zoom optional F (shutter) 1.8 to 2.9 f (focal length) (mm) 4.2 to 42 8 white power LEDs, 6 white 5 Lighting mm LEDs for illuminating joint gaps Light sensitivity (lux) 1.5 lux (F 1.8, 1/50 s) Luminous intensity (lumen) 1600 lm Protection class IP 68 Permissible 0°C – +40°C during operation ambient temperature -30°C – +70°C for storage Test pressure 1 bar Pressure monitoring 2 integrated pressure sensors1) manually, automatic, can be oper- Aperture function ated by remote control The IBAK PEGASUS HD is a high-resolution pan and tilt camera for In addition to its ability to create high-resolution digital images, the Panning range + / -120° full high-definition pipeline inspection systems. PEGASUS HD has all the important functions of a conventional pan Angle of aperture approx. 60° diagonally IBAK is a market pioneer in this sector and can offer a system that and tilt camera, such as the 10x optical zoom (and 4x digital zoom), Viewing range + / -150° includes video recording, transmission, display, processing and automatic imaging routines, easy-to-use diameter and deformation Angle of rotation continuous archiving in full HD quality. detection and damage measurements during inspections in sewers. manually, one-push autofocus, Focus function / The PEGASUS HD camera contains an image sensor in full HD for- All data are presented and further processed using the IKAS evolu- 1 cm – , can be operated by re- range ∞ mat (1920 x 1080 = 2.08 M pixel), which has about five times as tion software package. mote control many imaging elements as a conventional PAL sensor. Sensor (inch) 1 / 4" Image transfer from the creation of the image in the camera head up TV standard HD, Full HD all the way to display and saving at the operating panel is entirely digi- Image resolution (in pixels) horizontal 1920, vertical 1080 tal. This means that the camera image will be of a uniquely high qual- Integrated laser yes ity in terms of resolution and colour fidelity. An optical fibre cable will Integrated detector no transfer the output of the PEGASUS HD in full HD resolution, which transmitter is compressed using the highly efficient H.264 standard. Explosion protection optional Its vertical image resolution of 1080 pixel allows the PEGASUS HD to satisfy the requirements of the DWA data sheet „M149-5" for inspec- Combinable with tion of large conduits for the first time (e.g. the requirement in DN IBAK tractors T 76 HD, T86 HD 1000 for a vertical resolution of at least 1000 pixels). IBAK control systems BS 5, BS 7

1) LCD indicator and acoustic alarm in the control unit

– 22 – – 23 – Technical system data IBAK CERBERUS Camera specification Axial hand camera Axial hand camera Inspection range Inspection of main sewers Inspection of main sewers Dimensions W 290 mm / H 240 mm / D 110 mm Weight approx. 2.6 kg Push operation no Tractor operation no Upright picture control no Correctly oriented image no 10x optical; The operator in the vehicle Zoom 4x digital zoom optional and the inspector

communicate via voice contact. F (shutter) 1.8 to 2.9 f (focal length) (mm) 4.2 to 42 2 ancillary lights 10 with Lighting 3 high-power-LEDs Light sensitivity (lux) 1.5 lux (F 1.8, 1/50 s) Luminous intensity (lumen) 1200 lm Protection class IP 68 Permissible 0°C – +40°C during operation ambient temperature -30°C – +70°C for storage Test pressure 1 bar Pressure monitoring 2 integrated pressure sensors1) manually, automatic, can be oper- Aperture function The IBAK CERBERUS is an ideal extension to all IBAK TV systems The CERBERUS is connected to TV systems via the extension kit. ated by remote control in order to visually assess the condition of large human-accessible Continuous voice contact is possible between the operator and the Angle of aperture approx. 60° diagonally sewers. inspector, as a headset ensures interference-free communication Viewing range 360° The CERBERUS is a hand-held TV camera – with its ergonomically with the control centre via the camera cable. In this way operator and Focus function / 1 cm – ∞, manually, autofocus, designed holder, lightweight design and automatic shutter and focus inspector can work closely while performing special inspection tasks. range remote-controlled functions that can be activated if required, video recording is as easy Two durable high-power LED headlights and the 10x optical zoom Sensor (inch) 1 / 4" as pie. The CERBERUS features all desirable camera functions, such lens are particularly useful for showing up cracks and small defects. TV standard NTSC or PAL as a 10x optical zoom, autofocus and automatic/manual shutter. By projecting two laser points on the TV picture at a defined distance Horizontal image resolu- 460 Lines PAL from each other, the inspector can easily estimate relative sizes tion depicted in the picture and thus efficiently evaluate the condition of Integrated laser yes the sewer. Integrated detector trans- no mitter Explosion protection no

Combinable with KT 180, KW 180, KW 305/310/505 IBAK coilers / winches (only with the extension kit) IBAK control systems from BK 3.2 upwards, BE 3.2, all BS IBAK extension kit yes

1) LCD indicator and acoustic alarm in the control unit

– 24 – – 25 – IBAK RETRUS Technical system data Camera specification Back-Eye Camera Back-Eye Camera Inspection range DN 100 and up Inspection range DN 100 and up Dimensions L 100 mm / W 60 mm / H 70 mm Weight approx. 1 kg Push operation – Tractor operation yes Upright picture control yes (fixed by camera tractor) Correctly oriented image yes (fixed by camera tractor) Zoom no F (shutter) 2 f (focal length) (mm) 2.5 Lighting 2 white LEDs, controllable Light sensitivity (lux) 0.025 lux (F 1.2, 1/50 s) Luminous intensity (lumen) 400 lm Protection class IP 68 Permissible 0°C – +40°C during operation ambient temperature -30°C – +70°C for storage Test pressure 1 bar Pressure monitoring 2 integrated pressure sensors1) Fixed shutter, electronic shutter Aperture function with remote control Panning range – The IBAK RETRUS is a back-eye camera which can be used on Angle of aperture approx. 90° diagonally almost all IBAK camera tractors. The RETRUS allows easier and safer Viewing range see angle of aperture reversing in many situations. Problematic areas detected during for- Angle of rotation – ward travel, such as protruding obstructions, damage and displace- Focus function / range fix focus ments are recognised during reversing, so that the operator can Sensor (inch) 1 / 4" react accordingly and prevent damage to the system. Optimised synchronisation between IBAK winches and IBAK camera TV standard NTSC or PAL Horizontal image resolu- tractors guarantees a maximum range at constant speed and a fast 420 Lines PAL tion automated reversing. However, there are situations where control- ling the reverse procedure with a back-eye camera is recommended. Integrated laser no For example, if a steerable tractor is in a rectangular conduit, RETRUS Explosion protection optional makes the reversing procedure for the inspector easier. The danger of a collision between camera tractor and pipe wall is avoided using Combinable with the back-eye option. IBAK tractors all 2) RETRUS also offers invaluable advantages when it comes to revers- IBAK control systems from BK 3.2 upwards, BE 3.2, all BS

ing with a disconnected winch (with synchronisation switched off). 1) LCD indicator and acoustic alarm in the control unit The danger of the camera tractor running over the camera cable is 2) but T76 HD, T86 HD and older KRA tractors minimised with the back-eye camera.

– 26 – – 27 – IBAK T 66 2. Technical system data 1. Inspection range DN 100 and up Camera tractor CC1 Weight approx. 9 kg (with rim 93 and CC2) Inspection range DN 100 and up Steering function yes Speed continuously variable Folding connector bends horizontally and vertically CC5 Protection class IP 68 Pressure monitoring 2 integrated pressure sensors1) 2) 3. 4. ATC yes Explosion protection optional

Combinable with IBAK cameras all models except HD CC1 (pivoted and hinged), CC2 (fixed), CC3 (for ancillary light IBAK camera connections operation), CC5 (vertically adjustable and for ancillary light operation) 5. 6. IBAK cable winches all IBAK control systems all

CC3 CC2 Accessories (optional) Tilt measurement yes Temperature measure- yes, via temperature measurement The IBAK T 66 is a versatile camera tractor for the inspection of sew- The T 66 contains an electronic stabilisation function (ATC = Auto- ment module ers of DN 100 and up. It can either be used as a portable inspection matic Tilt Compensation). This function provides active overturn pro- Additional weights for DN 150 pipes and up system or for extending an existing camera tractor system. tection, allowing the tractor to drive safely in the pipe invert. 7. 8. Ancillary light ZSW 65 A variety of camera connections, wheel sets and a tractor exten- The T 66's modular design and the use of only a single tool for fitting rims, tyres, pneumatic tyres, sion kit make it possible to configure the T 66 optimally for differ- individual components result in short set-up times for the pipe adap- Wheel sets granulated wheels, wheels with tread ent requirements. It is equipped with the modular IBAK camera tations, resulting in more efficient working. to optimally suit nominal diameters connection so that all IBAK cameras can be operated with the T 66. Tractor extension kit FW 66 for DN 300 pipes and up Even when used with the two largest zoom cameras, ORPHEUS or Top performance using a portable system Back-Eye Camera RETRUS for DN 100 pipes and up ARGUS 5, it achieves good stability and traction. IBAK's ORION pan and tilt camera, the KT 180/ KW 104 / KW 204 Height adjustment yes, via camera connection CC4/CC5 In narrow spaces the T 66 copes in combination with the camera cable drum, the BP 4 or control box and the T 66 camera tractor, will various, for different deployment Camera connections connection CC1 that can be panned and folded. Because the folding provide you with a compact, high-performance, portable inspection purposes 1. T 66 with CC2 and ORION connector for the camera cable can also be moved horizontally and system. vertically, the camera tractor can be easily inserted into any pipe of 2. T 66 with CC3, ORION, tractor extension kit FW 66, ancillary light DN 100 and up, as well as through compact manholes and mainte- An extension to the existing tractor system ZSW 65 and pneumatic tyres nance openings. The power spectrum of the existing IBAK tractor range has been 3. T 66 with CC2, ORION and granulated wheels In larger pipes the use of an ancillary light is recommended. Even enhanced by the addition of the T 66 camera tractor, which makes 4. T 66 with CC2, ORION and wheels with tread larger pipe diameters are easily mastered by the T66 if fitted with pipe inspections of DN 100 and up possible. 5. T 66 with CC5, ORION, ancillary light ZSW 65 and additional weight the FW 66 tractor extension kit. It is recommended to use the easily 6. T 66 with CC5, ORION, ancillary light ZSW 65 and tractor extension 1) LCD indicator and acoustic alarm in the installed FW 66 for DN 300 upwards. control unit kit FW 66 2) ATC = Automatic Tilt Compensation = 7. T 66 with CC2, ARGUS 5 and tractor extension kit FW 66 electronic stabilisation function 8. T 66 with CC1, ORION and mixed tyres

– 28 – – 29 – 2. Technical system data IBAK T 76 / T 76 HD Inspection range DN 150 and up approx. 21 kg Camera tractor Weight Inspection range DN 150 and up (with size 93 rims and CB3) Steering function yes Speed continuously variable Folding connector bends horizontally and vertically Protection class IP 68 Pressure monitoring 2 integrated pressure sensors1) ATC 2) yes Explosion protection optional

Combinable with 3. IBAK cameras all IBAK camera base camera connection CB3, LISY 3, CB3S IBAK cable winches all T 76: from BK 3.5, all BS IBAK control systems T 76 HD: BS 7

Accessories (optional) Tilt measurement yes Temperature yes, via temperature measurement measurement module The IBAK T 76 is a robust and steerable camera tractor for the inspec- The wheel sets are supplied with the camera tractor and the optional Additional weights for DN 300 pipes and up tion of sewers of DN 150 and up. integrated electronic height adjusting device; this allows convenient ZSW 65 for DN 200 pipes and up Ancillary light In combination with a lowering device, the vertically and horizontally inspections with a centred camera in pipe diameters up to DN 700 ZSW 75 for DN 200 pipes and up bendable folding connector for the camera cable and the bendable For pipes with larger diameters, suitable accessories are available. 4. rims, tyres, pneumatic tyres, camera connection assure easy handling. The camera tractor can be The T 76 has an electronic stabilising function which automatically Wheel sets granulated wheels, wheels with tread easily and conveniently introduced into any pipe of DN 150 and up guides the camera tractor back into the pipe invert if its position devi- to optimally suit nominal diameters – with the corresponding accessories also through manholes with ates. All components and sub-assemblies are designed for maxi- ovoid pipe device / overturn protection 200/300 mm or DN 300 pipes and up; diameters of DN 300 and DN 400 and up. mum robustness and reliability. Tractor extension kits Tractor extension kit for DN 800 pipes The T 76 as well as the T 86 are designed as a modular system con- and up sisting of the tractor base, the camera base, a positioning unit and Back-Eye Camera RETRUS, for DN 150 pipes and up wheels. Both tractors can be easily assembled and reconfigured as 1. Drive unit necessary by the user with just a few manual actions required. LISY 3 (not T 76 HD) Height adjustment 1. T 76 with ORPHEUS, electronic positioning unit for lateral inspection Customers with an IBAK KRA 75 or 85 can use their existing wheels and pneumatic tyres Height adjustment electric, lift of up to 210 mm on the T 76 and the T 86 too. 2. T 76 with camera connection CB 3 3. T 76 with camera connection CB 3, ARGUS 5 and electronic positioning unit 5. 4. T 76 with camera connection CB 3 and ORPHEUS 5. T 76 with ORPHEUS, electronic positioning unit and granulated tyres

1) LCD indicator and acoustic alarm in the control unit 2) ATC = Automatic Tilt Compensation = electronic stabilisation function – 30 – – 31 – IBAK T 86 / T 86 HD Technical system data 1. Inspection range DN 200* and up Camera tractor Weight approx. 35 kg (with size 93 rims and CB3) Inspection range Steering function no DN 200 and up Speed continuously variable Folding connector bends horizontally and vertically Protection class IP 68 Pressure monitoring 2 integrated pressure sensors1) ATC 2) no Explosion protection optional

Combinable with IBAK cameras all 2. IBAK camera base camera connection CB 3, LISY 3 IBAK cable winches all T 86: from BK 3.5, all BS IBAK control systems T 86 HD: BS 7

Accessories (optional) Tilt measurement yes Temperature yes, via temperature measurement measurement module Additional weights for DN 300 pipes and up Both the T 76 (see previous pages) and the T 86 are designed to form The IBAK T 86 is an efficient camera tractor for inspecting pipes of ZSW 65 for DN 200 pipes and up part of a modular system consisting of the tractor base, the camera Ancillary light DN 200 and up. Its powerful drive enables it to perform pipe inspec- ZSW 75 for DN 300 pipes and up base, a height adjusting device and wheels. Both tractors can easily tions proficiently also over long distances. 1. T 86 with camera connection CB 3 rims, tyres, pneumatic tyres, be assembled and reconfigured as required by the user with just a The electrical positioning unit (available as an option) positions the 2. T 86 with camera connection CB 3, ARGUS 5 Wheel sets granulated wheels, wheels with tread few manual actions. camera at the optimal height in the sewer pipe. Together with the and electronic positioning unit to optimally suit nominal diameters lowering device, the folding connector that bends horizontally/verti- Customers with an IBAK KRA 75 or 85 can use their existing wheels ovoid pipe device/overturn protection of cally for the camera cable and the camera connection ensure simple on the T 76 and the T 86 too. Tractor extension kits 250/375 mm or of DN 300; tractor exten- and safe introduction of the camera tractor into the pipe. sion kit of DN 800 pipes and up RETRUS, from DN 300 upwards After inspection, the tractor's fast reverse speed makes it possible to Back-Eye Camera finish the work procedures quickly. (not T 86 HD) Drive unit All components and sub-assemblies are designed for maximum LISY 3 (not T 86 HD) robustness and reliability. for lateral inspection electric, for DN 225 and up, Height adjustment lift of up to 210 mm

*) with ARGUS 5: for DN 225 pipes and up 1) LCD indicator and acoustic alarm in the control unit 2) ATC = Automatic Tilt Compensation = electronic stabilisation function

– 32 – – 33 – IBAK LISY 3 2. Technical system data 3. DN 150 and up (T 76) Inspection range Lateral inspection module for DN 200 and up (T 86) T 76 and T 86 Weight approx. 9 kg (only LISY 3 module) Inspection range DN 150 and up Steering function yes (T 76), no (T 86) 6. Speed depending on the tractor 1. Folding connector on tractor T 76 / T 86 Protection class IP 68 Pressure monitoring integrated pressure sensors 1) ATC 2) depending on the tractor 4. Explosion protection optional Height adjustment mechanical (up to DN 300 inclusive)

Combinable with IBAK cameras POLARIS, JUNO, ORION, ORION L IBAK tractors T 76, T 86 5. KW LISY Sync. or KT 220 IBAK coilers / winches plus KW 305/310/505 IBAK control systems from BK 3.5 upwards, all BS

Accessories (optional) Tilt measurement yes (accessory T 76/T 86) Height adjustment mechanical (from DN 300 upwards) The IBAK LISY3 module turns the IBAK camera tractors T 76 and T 86 For cleaning and inspection in a single operation, a PHOBOS series in preparation (with temperature mea- Temperature into a lateral inspection system. It can be operated in mainline sew- flushing nozzle can be attached to the push rod of the KW LISY syn- surement module as accessory for measurement ers of DN 150 diameter upwards. An articulated joint allows easy chronous winch or the KT 220. T 76 / T 86) entry into sewers, even where there is a bend in the sewer. With The LISY 3, in combination with the T 76 / T 86 camera tractor, is for DN 300 pipes and up Additional weights the plug-in height adjustable elements contained in the assembly a robust and durable inspection system which meets individual (accessory T 76 / T 86) kit, the camera tractor can be easily adapted to the pipe diameter requirements and not only its high advancing speed but also its easy 8. Observation camera FK40F with with LISY 3. handling make it very appealing. Observation camera integrated high-power LED from Using LISY 3, laterals of DN 100 and up can be inspected from main- DN 300 upwards line sewers. The LISYCam 3 attachable control camera, which is used Wheel sets yes (accessory T 76 / T 86) to continuously monitor the position of the equipment and which ovoid pipe device/ overturn protection assists with inserting and forward feeding of the inspection camera, Tractor extension kit for 200/300 mm or for DN 400 pipes assures a seamless work flow. and up (accessory T 76/T 86) yes, for the inspection and cleaning in one work step (with flushing nozzle Cleaning package 1. IBAK LISY 3 PHOBOS), operational distance for DN 200 and up 7. 2. IBAK LISYCam3 3. IBAK F K40F (optional) 4. IBAK LISY 3 height adjustment 5. IBAK T 76 1) LCD indicator and acoustic alarm in the control unit 2) ATC = Automatic Tilt Compensation = electronic stabilisation function 6. IBAK LISY 3 on T 86 with height adjustment and ORION L 7. and 8. IBAK LISY 3 on T 76 with ORION L

– 34 – – 35 – IBAK PANORAMO 1. 2. Technical system data Inspection range DN 200 and up Camera system/3D Scanner approx. 46 kg (with camera tractor + Weight Inspection range DN 200 and up size 108 rims) Steering function no Speed continuously variable, max. 35 cm/sec. Folding connector bends horizontally and vertically Protection class IP 68 Pressure monitoring 2 integrated pressure sensors1) ATC 2) no Explosion protection optional Viewer software IBAK PANORAMO Viewer (Freeware) 3. Combinable with not applicable; 2 fisheye cameras inte- IBAK cameras grated IBAK cable winches KW 310, KW 505 IBAK control systems BS 5, BS 7

Accessories (optional) Tilt measurement yes Temperature no measurement The IBAK PANORAMO boasts unique scanner technology for highly- Additional weights for DN 300 pipes and up efficient sewer pipe inspections. On the one hand, pipe inspections Ancillary light no can be carried out at a substantially higher speed than with conven- 1. View of projecting obstruction in direction of travel rims, tyres, pneumatic tyres and granu- tional systems. On the other hand, the user receives a processed 2. View of projecting obstruction against direction of travel Wheel sets lated wheels to optimally suit nominal illustration in addition to the 3D film containing aseamless record- direction of travel diameters Position A: Position B: 3. PANORAMO unfolded view for a quick overview of the entire in- ing of the entire pipe inspection. Photo taken with the front camera Photo taken with the rear camera spection. ovoid pipe device/ overturn protection Tractor extension kits for 250/375 mm or for DN 400 pipes 4. PANORAMO with electronic positioning unit Priceless advantage: irrespective of the actual sewer inspection, it The PANORAMO principle and up 5. PANORAMO with wheel set using 108 rims electric, for DN 250 pipes, is possible to evaluate the condition in the office at any time – just The IBAK PANORAMO, unlike conventional sewer TV systems, uses Height adjustment as if the inspector was live on-site. The viewer can move freely in two high-resolution digital photo cameras with 185° fisheye lenses, lift of up to 210 mm the sewer pipe without any viewing restrictions, stop at any position, which each take images at distances of 5 cm. Due to the extremely Software IKAS PANORAMO-Analysis pan round 360°, zoom, look into inlets and even look backwards – all wide angle an all-round view of a pipe section is therefore captured 1) LCD indicator and acoustic alarm in the control unit this without affecting the recorded imaging material in any way. every 5 cm. These pipe section sequences are transmitted digi- 4. 2) ATC = Automatic Tilt Compensation = electronic stabilisation function All objects, such as displaced joints, protruding pipe connections etc. tally to the inspection vehicle, where they are put together using can be viewed in detail from all sides. PANORAMO software to create a true 3D interior view of the com- plete sewer pipe, both in and against the direction of travel. In con- In addition to the possibility of inspecting sewer pipes using the trast to video technology, in which the continuous light emitted from scanner technology, the PANORAMO digital cameras (see right: "The a moving vehicle results in a large amount of motion blur in record- 5. PANORAMO principle") allow the operator to set the video mode for ings, the IBAK PANORAMO pins sharp images: the stroboscopic the image display during the inspection run when passing significant light given off by the device’s integrated Xenon flash system lights sections. In this way moving elements such as running water can up the pipe so brightly that, despite the very high speed of inspec- be shown, as with conventional sewer cameras. tion of up to 35 cm per second, the system can guarantee very high- quality images, showing details in pin-sharp quality.

– 36 – – 37 – IBAK PANORAMO 150 Technical system data 1. Inspection range DN 150 and up Camera system/3D Scanner approx. 13 kg Weight Inspection range DN 150 and up (with camera tractor + size 93 rims) Steering function yes Speed continuously variable Folding connector bends horizontally and vertically Protection class IP 68 Pressure monitoring 2 integrated pressure sensors1) ATC 2) yes Explosion protection optional Height adjustment yes, mechanically 2. Viewer software IBAK PANORAMO Viewer (Freeware)

Combinable with IBAK cable winches KW 310, KW 505 IBAK control systems BS 5, BS 7

Accessories (optional) Tilt measurement yes Temperature mea- no surement Additional weights yes The IBAK PANORAMO 150 is a steerable camera system for opera- 1. PANORAMO 150 with granulated wheels Ancillary light no tional distances for DN 150 pipes and up. As with the well-estab- 2. PANORAMO 150 with wheels with tread rims, tyres, pneumatic tyres, lished PANORAMO (for DN 200 pipes and up) and the manhole Wheel sets granulated wheels, wheels with tread camera PANORAMO SI, it boasts tried and tested 3D scanner tech- to optimally suit nominal diameters nology – the user receives a 3D film containing the complete record- Tractor extension kit no ings of the entire pipe inspection as well as a processed illustration. Software IKAS PANORAMO-Analysis Priceless advantage: irrespective of the actual sewer inspection, it is 1) LCD indicator and acoustic alarm in the control unit possible to evaluate the condition in the office at any time – just as 2) ATC = Automatic Tilt Compensation = electronic stabilisation function if the inspector was live on-site. The viewer can move freely in the sewer pipe without any viewing restrictions, stop at any position, Size comparison: pan round 360°, zoom, look into inlets and even look backwards – all PANORAMO and PANORAMO 150 this without affecting the recorded imaging material in any way. All objects such as displaced joints, protruding pipe connections etc. can be viewed in detail from all sides. The PANORAMO 150 is ideally suited for the inspection of DN 200 pipes repaired with inliners. A range of rims and wheels are naturally available for the PANORAMO 150 as well as profiled and granulated wheels for the the various nominal diameters. With its mechanical positioning unit, the PANORAMO 150 also masters bigger nominal diameters, making it a flexible and versatile device that completes the PANORAMO family.

– 38 – – 39 – IBAK PANORAMO SI Technical system data Inspection range DN 200 and up, manhole inspection 3D Scanner for manhole inspection Weight approx. 7.5 kg Inspection range DN 200 and up Speed max. 35 cm/sec. Protection class IP 68 Pressure monitoring 2 integrated pressure sensors1) Explosion protection optional Viewer software IBAK PANORAMO Viewer (Freeware)

Combinable with not applicable; IBAK cameras 2 fisheye cameras integrated IBAK cable winches KW 310, KW 505, KW 180 SI 2) IBAK control systems BS 5, BS 7

At the top: PANORAMO-SI-shelf for insertion into the camera drawer. Accessories (optional) e.g. for the placing of Safety stand, aluminium the deflection roller Deflection roller yes, with support As autarkic compact module yes, e.g. for VW T5 to be built into vehicle Software IKAS PANORAMO-Analysis

1) LCD indicator and acoustic alarm in the control unit With the IBAK-PANORAMO SI, the user has the distinctive advan- For further assessment of the data IBAK's IKAS sewer analysis soft- 2) As autarkic compact module tages of PANORAMO technology also at their disposal for manhole ware, the PANORAMO SI option manhole inspection, is available. to be built into vehicle inspection. The result is the ability to visually assess the condition of With this software PANORAMO SI films are analysed easily and effi- manholes quickly and completely. ciently. The 3D scanner uses two high-resolution digital cameras with spe- The results are inspection reports and inspection data to suit all cially designed distortion-free wide-angle lenses, which optically commonly used data interfaces. The licence-free IBAK viewer scan the entire interior of the manhole in a few seconds in one sin- software provides the customer with a complete overview. As an extension to the IBAK IKAS inspection software, the “3D mea- gle vertical run. The digitally transmitted image data is immediately at The IBAK PANORAMO SI manhole inspection camera can be oper- surement” offers the capacity to measure objects using the option the operator‘s disposal as a live picture. The condition of the manhole ated as an extension to IBAK PANORAMO inspection systems “PANORAMO analysis". With just a few mouse clicks you can define is then evaluated either in the office or directly on site. with a BS 5/BS 7 control unit, or as an installation kit for a vehicle lines, outlines and circles. Measurements taken are highlighted in colour Unlike a video from a conventional pan and tilt camera, which only (e.g. VW T5) and displayed in the viewer. shows the section of view saved at the time of recording, the IBAK PANORAMO SI viewer software provides a seamless inspection of 1. View into the manhole the manhole. The inspector can stop at any position in the manhole, 1. 2. 3. 2. Unfolded view of the manhole pan 360°, zoom and save snapshots. 3. Point cloud for measuring the manhole An unfolded view of the manhole can be generated at the same time. This gives a rapid overview of the of the structure's condition and enables the user to measure objects on the manhole walls. PANORAMO SI as pallet installation kit for the VW T5 (autarkic compact module) and as extension to an inspection system

– 40 – – 41 – Extension Kit Extension set for IBAK cable winches

Extension for push operation systems using operating systems, BS 3.5, BS 5 and BS 7 Extension for tractor-operation using the BS 5 operating system

The operator in the vehicle and at the push device The first operator in the vehicle and the communicate via a voice connection BS 5

KW 310, second operator communicate via voice contact. BS 3.5, KW 505 BS 5 KT 180

BS 7 KW 180 KW 305/310 MiniLite Deep-level garage KT 180 KW 505

Extension-Box

HYDRUS, JUNO, ORION, ORION L, POLARIS T 66, JUNO, ORION, ZSW 65, FWZ T 66

Extension for inspection using the BS 3, BS 5 or BS 7 operating systems The modular portable tractor and pushrod systems supplied by IBAK rod system. The camera cable both supplies the energy and deliv- can be connected to IBAK inspection vehicles using extension kits. ers the video stream and the distance and direction data to your This allows you to inspect sewer sections and laterals from your vehi- inspection vehicle. The inspector and the pushrod system operator cle that are difficult to access. The entire reporting software of the can remain in contact using an integrated two-way voice connection. BS 7 vehicle, including recording devices, is also available for your push BS 3.5 KW 180

BS 5 KW 305/KW 310 KW 505

The vehicle operator and the inspector keep in contact via a voice connection CERBERUS

Extension-Box

– 42 – – 43 – IBAK HSP Technical system data 1. manual coiler for inspections Product classification Manual coiler in push operation Coiler support frame with HSP 40: 40 m Max. cable length rollers and transport handle HSP 60: 60 m HSP 40: approx. 570 x (700 – 980) x 360 mm Width x height x depth IBAK HSP 40 HSP 60: approx. 700 x 900 x 360 mm Weight HSP 40: 20 kg with push rod HSP 60: 24 kg IBAK HSP 60 Length measurement yes 2. Length display in the control unit Motor-driven no Even winding manual rewind omitted of cable Protection class IP 54 Explosion protection optional for HSP 40 and HSP 60 (push rod)

Combinable with HYDRUS, POLARIS, JUNO, ORION, IBAK cameras ORION L The IBAK HSP 40 and HSP 60 are manual coilers and hold 40 or 60 Example for extension with Example for combination of 1. IBAK HSP, handbrake IBAK extension kit yes metres of the IBAK "Magic Push Rods". These rods are guide hoses extension kit HSP with BK 3.5.1 2. IBAK HSP, slip ring transmission with plug IBAK control systems all containing both the camera cable and the push rod. The semi-rigid, easy-grip propulsion hose provides exceptionally long push lengths BK 3.5.1 Accessories (optional) and a unique bend capability. A length measuring device is integrated Vehicle mounting kit yes in the coilers. The coiler can be operated using a control unit or connected to IBAK cable winches using an IBAK extension kit. BE 3.5/BK 3.5 This allows the operator to work at a good distance from the vehicle BE 5/BE 7 JUNO and still be able to take advantage of the evaluation made on board. This increases the mobility and flexibility of the inspection process. ORION

KW 180/305/ 310/505/ ORION L KT 180

POLARIS BOX B

HYDRUS

HSP – 44 – – 45 – IBAK KT 180 Technical system data Product classification portable cable drum Cable drum Max. cable length 200 m Portable Width x height x depth 310 x 610 x 670 mm Weight with 180 m cable: 31 kg Length measurement / yes display motor-supported Motor-driven winding device Even winding yes of cable Remote control available as accessory (optional) Protection class IP 54 Emergency-stop yes switch

Combinable with IBAK cameras all except PANORAMO IBAK tractors all IBAK KT180 with extension cable VT 50 for the extension of the IBAK control systems all except BS 71) radius of action. VT 50 is available as an accessory. Accessories (optional) Remote control yes Extension system yes (VT 50) The IBAK KT 180 is a portable Vehicle mounting kit yes (telescopic rails) cable drum which can hold up to 200 m of camera cable. A length measuring device is integrated into the cable winch. The drive motor and a swivel cable guide help the operator to wind the camera cable evenly.

To ensure convenient and flex- ible operation, the cable drum is equipped with wheels and a folding transport handle.

IBAK KT 180, adjustable cable guide for even cable winding IBAK KT 180, transport handle Vehicle mounting kit for the KT 180

1) BS 5 only in conjunction with Box B5 FKT

– 46 – – 47 – IBAK KW 180 Technical system data Product classification cable winch cable winch Max. cable length 200 m Motor-driven Width x height x depth 330 x 520 x 630 mm (without boom) Weight with 180 m cable: 41 kg (with boom) Length measurement / yes – display on the monitor and on the display cable winch Motor-driven yes Even winding of cable yes Remote control yes Protection class IP 54 Emergency-stop yes switch

Combinable with IBAK cameras all except PANORAMO IBAK tractors all IBAK control systems BK 3.5.1, BS 3.5

Accessories (optional) Remote control yes Extension system yes Workplace light yes The IBAK KW 180 is a stationary, motor-driven cable winch holding up to 200 m of camera cable. The powerful motor and an automatic 1. 2. 3. winding guide ensure even winding of the camera cable. A length measuring device is integrated into the cable winch. A workplace 1. IBAK KW 180, automatic cable guide light can be installed on the boom with deflection pulley. If neces- 2. IBAK KW 180, length measuring display sary, the cable winch can also be operated using the remote control 3. IBAK KW 180, remote control unit (e.g. from the rear section of the vehicle).

– 48 – – 49 – IBAK KW 305/310/505 Technical system data 1. fully automatic, motor-driven cable Product classification Cable winches with integrated boom winch Fully automatic, motor-driven KW 305: 300 m Max. cable length KW 310: 300 m KW 505: 500/600 m* KW 305: approx. 500 x 780 x 720 mm Width x height x depth KW 310: ca. 550 x 780 x 760 mm (without boom) KW 505: ca. 550 x 860 x 900 mm KW 305: with 300 m cable: ca. 105 kg Weight KW 310: with 300 m cable: ca. 140 kg (with boom) KW 505: with 500 m cable: ca. 170 kg Length measurement / yes – display on the monitor and display on the cable winch Motor-driven yes Even winding yes, automatic of cable 2. Remote control yes Protection class IP 54 Emergency-stop yes KW 305 KW 505 switch Steel rope winch1) yes

Combinable with IBAK tractors all The IBAK KW 305, KW 310 and KW 505 are fully automatic, motor- The automatic cable guide ensures even winding of the camera cable KW 305: from BK 3.2, BE 3.2 IBAK control systems KW 310: BS 5, BS 7 driven cable winches holding up to 600 m (KW 505 with BS 5) of onto the winch. 3. KW 505: BS 5, BS 7 camera cable. All three are designed for the operation with IBAK In addition, the user can take advantage of the autostop function. KW 305: all except PANORAMO IBAK camera systems camera tractors and cameras. Also IBAK LISY on T76 / T86 in com- This stops the camera tractor automatically at pre-defined posi- KW 310/ 505: all bination with the LISY winches is operated with KW 305 / 310 / 505. tions when it is moving in reverse direction. This is particularly use- IBAK extension kit yes The IBAK camera systems PANORAMO, PANORAMO 150 and ful when it is approaching the entry manhole – a further example PANORAMO SI can be operated with KW 310 and KW 505 (with FO of the great user-friendliness of IBAK inspection systems. Accessories (optional) cable). The picture is transmitted safely and without loss by the KW 505 and Workplace light yes The integrated traction regulating device synchronises camera trac- KW 305 via optical fibre. The KW 505 can also be equipped with a Cable deflection device yes tor and cable winch operation: the cable is coiled onto and uncoiled thinner, lighter fibre optic cable to allow the cable winch to accommo- Positioning roller PANORAMO yes, for KW 505 and 310 from the winch in accordance with the speed of the camera tractor. date up to 600 metres and be operated using the BS 5. SI This intelligent regulating system prevents the camera tractor from Telescopic boom yes, for KW 505 running over the camera cable and at the same time ensures that the foot-operating switch for steel yes camera tractor reverses at a consistent speed. rope winch

The swivel boom enables exact positioning of the camera system 1) for insertion of the camera system over the manhole. The relevant camera system can then be lowered * in combination with the control system BS 5 safely and accurately into the manhole with the hoist, whilst the in- tegrated workplace light provides optimum illumination of the man- hole opening. 1. 1. IBAK KW 305/310/505, cable deflection device for difficult to access manholes 2. IBAK KW 305/310/505, foot switch for steel rope winch 3. IBAK KW 305/ KW 505, PANORAMO SI positioning roller

– 50 – – 51 – Technical system data IBAK LISY winches Cable drum/cable winch with Cable drum KT 220 Product classification camera cable and push rod for IBAK-LISY operation Cable winch KW LISY Synchron KT 220: 130 m Cable drum or winch Max. cable length KW LISY: 180 m for IBAK LISY operation (including 40 m push rod) IBAK KT 220 Width x height x depth KT 220: 320/560/520 mm (without boom) KW LISY: 410/540/680 mm KT 220: approx. 31,5 kg Weight (with boom) KW LISY: approx. 52 kg Length measurement / omitted, because integrated in display KW 305 / 310 / 505 Motor-driven KT 220: no | KW LISY: yes KW LISY: yes, automatically Even winding of cable KT 220: not applicable Remote control KW LISY: yes | KT 220: no Protection class IP 54 Emergency-stop IBAK LISY Synchron KT 220: no | KW LISY: yes switch omitted, because integrated in Steel rope winch1) KW 305 / 310 / 505

Combinable with IBAK cameras POLARIS, JUNO, ORION, ORION L The IBAK LISY winches supply the cameras connected to the IBAK The IBAK KT 220 cable drum is the manual version for KW LISY oper- IBAK camera systems LISY 3 LISY inspection system. The LISY winches are available in two differ- ation. It holds 130 m of camera cable, including 40 m of "Magic Push IBAK control systems from BK 3.2, BE 3.2, all BS ent versions: the IBAK KW LISY Synchron motor-driven cable winch Rod" (guide tube with camera cable and push rod). The KT 220 is the and the IBAK KT 220 manual cable drum. version for installation in vehicles with limited capacity and payload. The cable winch KW LISY Synchron can hold up to 180 m of cam- 1) for insertion of the camera system era cable; of which 40 m are for the so-called "Magic Push Rod". This is a guide hose containing both the camera cable and the push rod. The semi-rigid propulsion tube provides excellent bend capability and powerful propulsion and achieves long push lengths during lateral Application example service inspections. The KW LISY Synchron is motor-driven; winding on and off the cable IBAK ORION L => connected to Cable winch IBAK KW 505 LISY Synchron is automatically synchronised via an electronic regulating device to the speed of the cable winch in operation (e.g. KW 305 or 505) and IBAK LISY 3/T 76 => the LISY 3 camera tractor that is connected to it. This ensures particu- connected to KW 505 larly convenient and efficient working procedures.

LISY synchronous winch: up to 180 m of camera cable incl. 40 m push rod

– 52 – – 53 – IBAK MiniLite Technical system data Product classification compact push camera system Compact push camera 40 m (exchange basket 500/15) Magic Push Rod system 30 m (exchange basket 500/12) Inspection range DN 50 and up Perfect Push Rod 80 m (exchange basket 500/10) 385 x 680 x 630 mm Width x height x depth (without control console) Dimensions control W x H x D: 320 x 62 x 500 mm console splash-proof (IP54), Monitor daylight suitable Weight control console approx. 5 kg Weight coiler approx. 18 kg (incl. exchange basket) via SD card Data storage (digital images and videos) yes, in conjunction with the explosion Explosion protection protection camera Length measurement / yes display

Combinable with HYDRUS, POLARIS, JUNO, IBAK cameras ORION, ORION L IBAK control systems control system integrated The IBAK MiniLite is a compact push camera system for inspecting MiniLite with extension and power pack IBAK extension kit yes household and property drainage systems. It combines extreme dura- (without control console*) bility with easy handling and can be used safely after only a short training Accessories (optional) period. The MiniLite can be deployed together with the HYDRUS and a 30 metre Magic Push Rod: 500/12 with camera HYDRUS incl. 30 Magic Push Rod from DN 50 upwards. In pipes of this size its ability to m push rod, for operational distances of negotiate bends of 90° is guaranteed. DN 50 and up. All other push cameras that can be attached to a Magic Push Rod (up to 40 Exchange basket 500/15 incl. 40 m push rod, for opera- m in length) or a Perfect Push Rod (up to 80 m) can be deployed in larger tional distances of DN 100 and up pipe diameters. Perfect Push Rod: The 10.4" MiniLite display provides excellent picture quality for all camera 500/10 incl. 80 m push rod, for opera- tional distances of DN 100 and up variants. Our location transmitter (fitted on POLARIS, ORION and ORION L Software IKAS32 office, option "Video Analysis"1) and JUNO) can be operated easily from the MiniLite control console. Where deployed with the ORION or POLARIS, the system can make laser Safety device with built-in personal protection switch measurements at the push of a button (optional). Text can be input and Power Pack yes, 24VDC 4,5Ah image or video files can be saved to an SD card simply and easily. The foil keyboard is particularly large, allowing the user to enter data even with 1) facilitates the generation of a complete inspection report in the common interface formats in gloves on. The whole system is fully splash-proof and very easy to clean. the office

Adjustable transport holder * Control console is necessary for complete scope of operation

– 54 – – 55 – IBAK MobiLite Technical system data Product classification compact push camera system Compact push camera system 30 m (exchange basket 600/12) Magic Push Rod Inspection range from 50 m (exchange basket 600/15) DN 50 upwards Perfect Push Rod 80 m (exchange basket 600/10) 400 x 780 x 720 mm (without control Width x height x depth console) Dimensions control W x H x D: 340 x 270 x 300 mm console splash-proof (IP54), Monitor daylight suitable Weight control console approx. 5 kg Weight coiler approx. 29.5 kg (incl. exchange basket) storage of photos, videos and inspection reports in the integrated PC Data storage onto the hard drive; data transfer via USB port in conjunction with the explosion Explosion protection protection camera Length measurement / yes display

Combinable with HYDRUS, POLARIS, JUNO, IBAK cameras The IBAK MobiLite is a compact push camera system for the inspec- ORION, ORION L tion of house and property drainage systems. It combines extreme IBAK control systems integrated; PC with IKAS 1) durability with easy handling and can be used safely after only a short IBAK extension kit no training period. With the MobiLite, comprehensive, complete and standardised doc- Accessories (optional) umentation (per DIN EN 13508) is generated on-site. The inspection Magic Push Rod: films are saved as MPEG-1/2/4 videos on the hard drive. 600/12 with camera HYDRUS incl. 30 m The MobiLite is equipped with a 50 m, 15 mm thick bend capable push rod, used from DN 50 upwards. 500/15 incl. 40 m push rod, for opera- push rod (Magic Push Rod). The cameras can be operated via the joy- Exchange basket tional distances of DN 100 and up stick integrated into the control console. The PC is operated by pen Perfect Push Rod: navigation on the graphic tablet. 600/10 incl. 80 m push rod, used for op- The high-quality, detachable 12" monitor is suitable for use in day- erational distances of DN 100 and up light. It's high resolution allows it to deliver excellent images. IKAS option "NAVIGATOR" 2) and much Software The control console can be removed from the device for transport more purposes. The MobiLite's robust design means it can be used in all Safety device with built-in personal protection switch weather conditions. yes, to improve the precision of mea- External counter surements External counter, optional, to Brake at the basket to avoid Power Pack yes, 24VDC 11 Ah (Li-ion) improve the precision of mea- unintentional winding up of the surements push rod; further, the propel- ling force of the push rod can be 1) IKAS evolution or IKAS MobiLite generate inspection reports in the common interface formats 2) facilitates the identification of the 3D lateral run (X, Y, Z coordinates) adjusted. Adjustable transport holder

– 56 – – 57 – IBAK BK 3.5.1 Technical system data Product classification Control box Control box Monitor TFT monitor, 12", control display 5.7" Mobile control and operating unit Width x height x depth 550 x 296 x 350 mm (with handle) Weight approx. 19 kg (w/o PC), 21 kg (w PC) Data display generator yes Video output yes Connection for external yes keyboard TV standard NTSC/PAL Digital video recording Storage of digital videos MPEG/JPEG (optional) and pictures, data transfer via SD card Storage of digital videos, Data storage with PC individual images/photos and module and IKAS (optional) inspection reports; data transfer via USB interface or LAN Operating voltage 100-240 VAC +6% -10%, 50/60 Hz Length measurement / yes display Explosion protection in conjunction with the explosion monitoring protection camera

Combinable with The IBAK BK 3.5.1 control box is easily transported in the box hous- For clear menu guidance, the IKAS BK edition software includes a Two USB ports (active only with PC module), IBAK cameras all except PANORAMO ing thanks to its compact design. Used either installed in an inspec- specially optimised analysis assistant, which enables the parallel dis- LAN interface, audio out/in, RS 232 interface tion vehicle as well as a portable unit, BK 3.5.1 facilitates the opera- play of the video image and software dialogues on the screen. The to connect the electronic data display gener- IBAK tractors all tion of IBAK inspection systems. video images can be digitised in MPEG format. In addition, an exter- ator (EDE) with an external PC, PA potential IBAK winches KT 180, KW 180, KW 305 All functions of the camera tractor and the camera can be controlled nal mouse can be connected to the PC module and data transfer is equalisation connection, PC switch on/off for IBAK push systems MiniLite (with extension kit) optional PC module, coiler/coiler connection, and operated using the two joysticks, the control buttons and the also possible via the USB port or a network interface (LAN). IBAK coilers / winches HSP 40, HSP 60 mains connection cable integrated keyboard. At the same time, the operating status of the The video data in MPEG 4 format can be transferred to a memory IBAK extension kit yes individual system components is clearly indicated on a 5.7" colour card (Accessory SD-Option) without using your existing PC (or with display. it switched off). Accessories The inspection itself is monitored from a 12" TFT colour monitor with Firmware updates of optional IBAK components can be carried out 1. 2. IBAK software IKAS excellent picture reproduction. In addition, texts and symbols can be by the user with the aid of a standard SD card. SD-Option MPEG/JPG-Recorder overlaid on the video picture via the keyboard and an integrated data Integrated PC Module with reporting PC-Module display generator. software Optionally, the BK 3.5.1 control box can also be equipped with a PC module. This makes it IKAS-capable and permits a complete analysis 1. Control buttons for the monitor, Y/C video output and composite col- of the condition of the inspected sewer on-site. our video in/output on the inside of the lid 2. Card slot for video recording unit (optional)

– 58 – – 59 – IBAK BS 3.5 / BS 7 Technical system data control system for operating IBAK Product classification Control system for IBAK inspection systems cameras and camera tractors Control slot BE 3.5, / BE 7 BP 3.5: 770 x 100 x 390 mm Width x height x depth BE 3.5: 483 x 178 x 298 (+200*) mm Control console/console combination BP 3.5 BE 7: 483 x 266 x 358 (+200*) mm and keyboard BE 3.5: approx. 7,6 kg Weight BE 7: approx. 11 kg Intercom loudspeaker, mi- yes (gooseneck microphone, crophone volume control in BP) BS 3.5: up to 300 m Camera cable length BS 7: up to 500 m Data display generator, yes (EDE 7) RS232 interface Video input/output yes, multiple Keyboard yes TV standard NTSC/PAL Operating voltage 100-240 VAC, 50/60 Hz Length measurement / yes display Control slot BE 3.5 Autostop function yes secondary circuit in the camera cable lim- Safety device ited to 60 V (BS 3.5), 120 V ( BS 7) with insulation monitor

Combinable with IBAK cameras all (BS 3.5 no PANORAMO) BS 3.5: HSP, KT 180, KW 180, KW 305, IBAK winches LISY winches BS 7: KW 310, KW 505, LISY winches IBAK tractors all IBAK extension kit yes The IBAK BS 3.5 and BS 7 are operating systems for IBAK inspec- The touch-screen also offers the user a wide variety of other possibili- tion equipment for fixed installation in an inspection vehicle. Both ties, such as an information menu where all assembled components *)  Installation space these central control and operating units consist of an ergonomically and components identified by the system are displayed on a colour designed control console (BP 3.5), a 19" rack mount and a keyboard. display. In addition, various features can be controlled, such as light All current IBAK tractors, winches and cameras can be operated with intensity, different functions of the camera and the tractor as well as either system, the connected components are automatically iden- further system-relevant options. tified by the system. This automatic identification turns the touch Damage descriptions, symbols or comments entered via the key- screen into a particularly user-friendly device that is instantly usable. board can be overlaid with the integrated data display generator into The tractor and the camera are operated in a user-friendly manner the video image. with both joysticks. In addition, it is also possible to connect video recording devices. The touch-screen integrated into the control console, with many options Spoken comments can be recorded using the integrated micro- for controlling the IBAK system components. phone in the control console; the audio output enables saving of these voice-overs synchronously to the inspection video.

– 60 – – 61 – IBAK BS 5 Technical system data Combinable with control system for operating IBAK cam- Product classification IBAK cameras all Control system for IBAK inspection systems eras and camera tractors IBAK winches KW 310, KW 505, LISY winches Control console with 2 joysticks BC 5, BP 5: 770 x 100 x 390 mm BE 5: 483 x 177 x 310 mm IBAK camera systems all Control console with LCD display BP 5, Width x height x depth BEV5B: 483 x 177 x 310 mm IBAK tractors all 19" rack mount BE 5, BAV5: 483 x 88 x 265 mm individual components between 2.7 kg IBAK extension kit yes Weight 19" electricity distribution (battery) BEV 5B, and 12 kg; total weight approx. 32 kg 19" data display generator and signal processing audio for intercom and extension system; gooseneck mi- Intercom loudspeaker, intercom plug with loudspeaker crophone, internal loudspeaker, exter- microphone and microphone BAV 5, nal loudspeaker, hands-free talking for extension system Alternating current distribution BAC 5B Camera cable length up to 600 m Data display generator, yes (EDE 7) RS232 interface Video input/output yes Keyboard yes TV standard NTSC/PAL Operating voltage 110-240 VAC, 50/60 Hz Length measurement / yes display The IBAK BS 5 is the central control and operating unit for perma- The IBAK BS 5 also has an integrated autostop function, which, in nently installed IBAK inspection systems. All current IBAK cameras combination with cable winches KW 310 and 505, causes the tractor Autostop function yes secondary circuits; monitored by insu- and tractors can be operated using it. The camera tractor and the to stop at pre-defined points when driving in the reverse direction. Safety device respective camera are controlled via the ergonomically-shaped con- This makes it much easier, for example, to approach the entry man- lation monitor sole, with two joysticks, enclosing the PC keyboard. hole correctly. With its high-tech microprocessor control, the intelligent IBAK BS The polished, practical and energy-efficient design of the IBAK BS 5 control system identifies the system components connected and 5 guarantees efficient operation of IBAK inspection systems from status information, such as the internal pressure of camera and trac- every perspective. tor, supply voltage, lighting intensity as well as the height of the elec- tronic height adjustment as a percentage, is displayed on the graph- ics LCD for the user. Seven of the 16 control keys have pre-defined functions by default, and nine further keys are automatically assigned with functions by the system depending on the system configuration.

– 62 – – 63 – 1. Technical data PHOBOS 1 PHOBOS 2 PHOBOS 4 IBAK PHOBOS Deployment range ≥ DN 100 ≥ DN 100 ≥ DN 100 Flushing nozzles Nozzle flow rate approx. 45 l/min.* 50 l/min.* 60 l/min.* Inspection range DN 100 and up Combinable with IBAK cameras HYDRUS, JUNO, ORION, ORION L IBAK coilers / winches HSP 40, 60, MiniLite, MobiLite IBAK winches KW LISY Synchron, KT 220

4.

IBAK PHOBOS 4 on a LISY 3 with flushing package

2.

IBAK PHOBOS flushing nozzles enhance the IBAK range of products When combined with the flexible IBAK ORION L camera, this 5. by providing the ability to inspect and clean house drains and house even allows heavily branched or very long pipes to be cleaned and sewers in one single operation. inspected with ease. One efficient, tried-and-tested solution would be to combine the The IBAK PHOBOS 4 is switchable, and depending on the require- IBAK ORION L with one of the three PHOBOS flushing nozzles, ments, the direction of the water flow can be oriented either for- which are fed by the high-pressure flushing system. These are oper- wards or backwards. ated on either the LISY 3 combined with an IBAK-TV and flushing With the water flow oriented forwards, accumulated material can vehicle. Alternatively, you can use IBAK pushrod systems connected be washed away on inspection; if the flow is oriented backwards it to the flushing vehicle. The IBAK flushing nozzles can be easily acts as a "reverse gear", especially in a branched lateral network with secured to the camera push rod and allow inspection and cleaning branches, as the water pressure aids the camera in moving around in a single operation. curves when travelling backwards.

You can achieve a high cleaning performance and good satellite drive *the specified nozzle flow rate is achieved with an operating pressure of 120 bar and a flushing for the TV camera with all PHOBOS models. This is thanks to the spe- The IBAK flushing vehicle with integrated high-pressure flushing 3. hose combination of: 30 m NW 10 special hose, adapted to 80 m 1/2" hose (NW 12.7). cial design of the interior of the nozzle, in particular on the PHOBOS technology and IBAK flushing nozzles permits the inspector to work 2 and 4, which helps to reduce flow turbulence to a minimum, thus highly efficiently, as: flushing and TV inspection can be performed in 1. IBAK PHOBOS 1 reducing any loss in performance within the nozzle. a single operation and – importantly – without leaving the mainline 2. IBAK PHOBOS 2 with the ORION L on the MiniLite sewer, which means that you do not need to rely on inspection open- 3. IIBAK PHOBOS 2, rear view ings or transfer manholes. 4. IBAK PHOBOS 4 5. IBAK PHOBOS 1 in action

– 64 – – 65 – IBAK ILP Laser Profiler Deformation measurement in sewer pipes

Technical system data laser measurement device Product classification for deformation measurement in sew- ers Inspection range DN 150 and up - DN 1050* Identification of reduction of cross-section deformation pipe capacity minimum/maximum diameter drainage obstacles Video recording of Graphically illustrated unevenness the laser ring ovality measuring

*This will depend on the camera being used. The IBAK ILP (Laser Profiler) reliably locates and measures sewer The data collected by the whole recording can be viewed and shared pipe deformations. The deformation measurement is carried out by using our licence-free viewer at any time. a laser diode mounted on a pipe camera (TRITON, JUNO, ORION, This system provides for a high level of accuracy (tolerance ±0.5% in ORPHEUS, ARGUS 5, PANORAMO). Depending on pipe diameter relation to pipe diameter). The IBAK Laser Profiler is an international and camera type, the laser extension and support may vary. measuring instrument recognised by the WRC (Water Research The laser profiler mode of operation is based on a laser ring, which is Council) in England and the Department of Transportation USA. projected onto the pipe wall and subsequently recorded by the con- nected camera. The software calculates the data received and cre- ates a 3D model of the pipe geometry. It is also possible to generate two-dimensional illustrations and graphics. With these graphic illustrations all requisite information regarding the diameter, ovality, deformation, corrosion, percentage of full capacity, minimum/maximum diameter as well as horizontal and vertical diam- eter (X and Y) in mm can be deduced.

Two-dimensional profile report, laterals with position details Three dimensional profile report

– 66 – – 67 – ARGO 2 Sample expansions: Vehicles Camera raft DN 400 and up

Classic Line The IBAK ARGO 2 camera raft was specially developed for pipes Technical system data of larger dimensions that are partially filled with water. The floating Product classification Camera raft body is secured by means of a pull rope. That makes it possible to Inspection range DN 400 and up inspect either with or against the current in the pipeline. Width x height x depth 370 x 160 x 850 mm You can mount any of IBAK‘s cameras using the appropriate adapt- Weight approx. 7 kg ers. It is also possible to achieve the correct centre of gravity by plac- Superstructure Raft adapter box with camera base ing a variety of counterweights. (when using an ancillary light) or cam- era adapter with fastener Top Line

Combinable with IBAK cameras all except PANORAMO IBAK winches all IBAK control systems all

Accessories (optional) Safety device Anti-roll bar

Sewer cleaner

– 68 – – 69 – Electric cutting and grinding with IBAK Robotics products

IBAK Robotics products use electrical power. This makes them light, quiet and powerful. This high-quality, innovative approach has no comparison with the pneumatic and hydraulic motors available else- where: It offers a wide range of advantages: More information IBAK Robotics products are: on • High-performance and sturdy ibak-robotics.de • Autonomous, with no need for extra equipment AlliGator • Available on the market worldwide

IBAK Robotics products provide: • Lower operating costs as compared to hydraulic and pneumatic systems • Excellent value for money • A high level of efficiency • Lightweight systems that can be transported in 3.5-tonne vehicles

IBAK Robotics products allow you to: MiniGator • Work fast • Cut and grind underwater and at extreme temperatures • Handle equipment easily • Cut and grind almost noiselessly • Work in an environmentally friendly manner

FlexiGator

– 70 – – 71 – IBAK – Made in Germany

All IBAK products have one thing in common: they provide 'Made in Germany' quality. All system components are developed, pro- duced, assembled and tested by IBAK. Thanks to their high quality standard, IBAK products have been a benchmark in efficiency and return on investment for more than 60 years. Content is subject to changes. Errors may occur. | 131218_Products_21x21_en | 6. Aufl. Aufl. | 6. | 131218_Products_21x21_en occur. may Errors Content is subject to changes.

IBAK Helmut Hunger GmbH & Co. KG Wehdenweg 122 · 24148 Kiel · Germany Phone: +49 (0) 431 7270-0