Gnome Monosoupape Rotary Engine Classic Aero Machining Services

Total Page：16

File Type：pdf, Size：1020Kb

Gnome Monosoupape Rotary Engine Classic Aero Machining Services Production of Gnome Monosoupape rotary engines has resumed after a lapse of nearly a century. These high quality, period authentic engines are now manufactured by Classic Aero Machining Service of Blenheim, New Zealand. For those who want to experience exactly what it was like to fly during the Great War era, the smells, sounds and other characteristics of a rotary are unlike any other engine. They were fitted to many aeroplanes of the period, including Sopwith. General characteristics Type: 9-cylinder, single-row, rotary engine Bore: 110 mm (4.3 in) Stroke: 150 mm (5.9 in) Displacement: 12.8 L (781.63 cu in) Length: 107.4 cm (42.3 in) Diameter: 95 cm (37.4 in) Dry weight: 128 kg (282 lb) including starter Components Valvetrain: Single overhead valve Fuel type: 45ltrs p/hr 100 Octane Avgas ~ 12 US gal/hr Oil system: Total loss, castor oil ~ 2.5 US gal/hr Cooling system: Air-cooled Reduction gear: Nil reduction gear, direct drive, right-hand tractor, left-hand pusher www.KipAero.com 2127 Crown Rd, Dallas, TX 75229 (888) 243-0440 Performance Power output: 120 hp at 1150 rpm Maximum Continuous Power: 1200RPM Compression ratio: 4.85:1 Improvements: Forged aluminum pistons in lieu of cast iron Modern piston rings 21-4N stainless steel valves w/ stellite tips Electronic ignition Optional electric starter Pricing: Gnome Monosoupape Rotary Engine ......................................... $62,000 USD Gnome Monosoupape Rotary Engine with Electric Self Start ....... $65,400 USD Fox Wooden Vintage Propeller (hand crafted) .............................. $6,200 USD Shipped FOB, crated from Blenheim, NZ. Gnome Monosoupape rotary engine fitted to a Sopwith Pup (right) and on test stand (left). Courtesy of Classic Aero Machining Services, Blenheim, New Zealand. www.KipAero.com 2127 Crown Rd, Dallas, TX 75229 (888) 243-0440 .

Copy Link

Recommended publications

Exergetic, Exergoeconomic and Sustainability Assessments of Piston-Prop Aircraft Engines
Isı Bilimi ve Tekniği Dergisi, 32, 2, 133-143, 2012 J. of Thermal Science and Technology ©2012 TIBTD Printed in Turkey ISSN 1300-3615 EXERGETIC, EXERGOECONOMIC AND SUSTAINABILITY ASSESSMENTS OF PISTON-PROP AIRCRAFT ENGINES Onder ALTUNTAS*, T. Hikmet KARAKOC** and Arif HEPBASLI*** *Anadolu University, School of Civil Aviation, 26470, ESKISEHIR, [email protected] ** Anadolu University, School of Civil Aviation, 26470, ESKISEHIR, [email protected] and [email protected] *** Yaşar University, Department of Energy Systems Engineering, Faculty of Engineering, 35100 Bornova, IZMIR [email protected] and [email protected] (Geliş Tarihi: 15. 02. 2011, Kabul Tarihi: 12. 04. 2011) Abstract: In this study, the exergetic, exergoeconomic, and sustainability aspects of piston-prop aircraft engines are comprehensively reviewed. These analysis and assessment tools are applied to a four-cylinder, spark ignition, naturally aspirated and air-cooled piston-prop aircraft engine in the landing and takeoff (LTO) phases of flight operations. LTO consists of four parts: takeoff, climb out, approach, and taxi. The results of energy analysis indicate that takeoff is a phase requiring high power with a maximum work rate of 111.90 kW. Maximum fuel energy and exergy rates are calculated to be 444.30 kW and 476.51 kW, respectively. The minimum total loss is found in the taxi phase, while maximum energy and exergy efficiency values are 26.76% and 24.95% in the climb out phase, respectively. Based on the results of the cost analysis, the taxi has the maximum exergy destruction cost rate with 23.41 $/h at a fixed production and 2.96 $/h at a fixed fuel.
[Show full text]
Kitplanes 2020 02.Pdf
2020 ENGINE BUYER’S GUIDE ® KITPLANES February Punch? a Findlay 2020What’s • KnowLong-EZs About Didn’t You What Into an Overhaul • Turns Inspection an Engine Guide • How Buyer’s Engine 2020: Our Massive Vroom Tommy Meyer YOUR ENGINE CHOICES Makes One for Dad We List All the Popular FEBRUARY 2020 Engines for Homebuilts BELVOIR PUBLICATIONS BELVOIR TRICYCLE GEAR In the Shop: It’s All About the Attitude • ELT Gotchas • Glareshield Tips and Tricks THE SUBSONEX CONTINUES • IRAN vs Overhaul Tackling Wiring, Avionics and Plumbing www.kitplanes.com ENJOY THE VIEW. EVERY TIME YOU FLY. G3X TOUCH™ SERIES FOR EXPERIMENTAL AIRCRAFT TOUCHSCREEN, INTEGRATION WITH ADS-B TARGETTREND™ SUPPORTS ANY MODERN AUTOPILOT COMPLETE KNOB AND COMMS, TRANSPONDER, TRAFFIC AND COMBINATION OF 10.6” WITH ACCLAIMED SYSTEM STARTING BUTTON CONTROL IFR GPS AND MORE SIRIUSXM® WEATHER* AND 7” DISPLAYS, UP TO 4 PERFORMANCE AT $4,495** FOR MORE DETAILS, VISIT GARMIN.COM/EXPERIMENTAL *Additional equipment required. **MSRP: 7” display and ﬂ ight sensors. © 2019 Garmin Ltd. or its subsidiaries. 19-MCJT19630 G3X ENJOY_THE_VIEW Ad-7.875x10.5-Kitplanes.indd 1 3/12/19 8:45 AM FebruaryCONTENTS 2020 | Volume 37, Number 2 2019 Engine Buyer’s Guide 16 YOUR AERO MOTIVATION IS HERE! By Tom Wilson. • Horizontally opposed four-stroke gasoline • Inline and vee four-stroke • Radial and rotary (traditional) • Rotary (Wankel) • Compression ignition (diesel and Jet A) • Volkswagen • Jets and turboprops • Corvair • Two-stroke 16 • Electric 18 NEW VS. USED: Understanding the difference between factory remanufactured, field overhauled, top overhauled, and just plain used. By Tom Wilson. Builder Spotlight 4 THE BIG TOOT: Tommy Meyer builds his father’s legacy.
[Show full text]
Products Catalogue
2017 Products catalogue TAURUS Lukasz Laskowski Ul. Dobrzyńska 146 42-202 Czestochowa POLAND VAT: PL9372329089 Tel. ++48 601 14 97 93 mail: [email protected] [email protected] Lukasz Laskowski www.turusmodels.pl TAURUSMODELS 2017-08-17 Number: Scale: D3201 Spark plugs 14 pieces 1:32 Number: Scale: D3202 Valves with lifters for Mercedes 1:32 DIIIa Number: Scale: D3202c Valves (Conic Springs) and lifters 1:32 for Mercedes DIIIa Number: Scale: D3203 Cockpit Selector Switches for 1:32 WNW's Gotha GIV (6 pieces) Number: Scale: D3204 Spark plugs late type 1:32 Number: Scale: D3205 Ammunition Mauser 9,72 1:32 Number: Scale: D3206 Complete Timing Gear for 1:32 Mercedes DIV (can be used in WNW's Gotha) Number: Scale: D3207a Complete Timing Gear for 1:32 Mercedes DIII (easy to paint) Number: Scale: D3207b Complete Timing Gear for 1:32 Mercedes DIII (easy to assembly) Number: Scale: D3208 Oberursel UI radial engine 1:32 Kit contains: 80 high quality resin parts, wires, instruction, box. Number: Scale: D3209 Complete Timing Gear for 1:32 Mercedes DIIIa Number: Scale: D3210a Spark plugs type III 1:32 used in German radial engines 10 pieces Number: Scale: D3210b Spark plugs type III 1:32 used in German radial engines 15 pieces Number: Scale: D3211 Intake manifold nuts 1:32 8 pieces Number: Scale: D3212 Aircraft maintenance tail stand 1:32 Number: Scale: D3213 Gnome Monosoupape B-2 engine 1:32 Kit contains: 91 high quality resin parts, wires, instruction, box. Number: Scale: D3214 Spark plugs type IV 1:32 used in British radial engines 20 pieces Number: Scale: D3215 Valves with lifters for BMW DIIIa 1:32 Number: Scale: D3216 Oberursel U.III 1:32 German double-row radial engine Kit contains: 127 high quality resin parts, wires, instruction, box.
[Show full text]
A Publication of the Southern Museum of Flight Birmingham, Al Historic Artifacts
A PUBLICATION OF THE SOUTHERN MUSEUM OF FLIGHT BIRMINGHAM, AL WWW.SOUTHERNMUSEUMOFFLIGHT.ORG HISTORIC ARTIFACTS THE gnome type N THE FAILED VENTRAL TURRET rotary engine isitors to the museum will have the opportunity to observe a V rare defensive weapon that was in use for a short time during he Gnome rotary is essentially a WWII. The production B-25B, B-25C, B-25D, and some B-25G T standard Otto engine (a stationary models had a retractable remote control belly turret, called a single-cylinder internal combustion four ventral turret. These turrets were often removed in the field -stroke engine designed by Nikolaus because they were ineffective and Otto), with cylinders arranged radially disliked by the crews. The lower turret around a central crankshaft just like a was officially deleted in the middle of the B-25G production run. The ventral turret was operated through a periscope that caused such intense vertigo and nausea in its' user that it was rarely used. In the Pacific, the turrets were removed because monsoon rains turned airfields into mud which covered the gunsight on takeoff rendering the turret useless. Harold Maul, a B-25 crewman, described the ball turret in Eric Bergerud's book, Fire in the Sky: The Air War in the South Pacific: "The worst thing ever designed was the bottom turret of the B-25. It was the conventional radial engine, but instead stupidest bit of equipment. My God, the operator is sitting in one of having a fixed cylinder block with place getting a reverse image through a mirror.
[Show full text]
How Many Valves Per Cylinder (Revised) – 0, 1, 2, 3, 4, 5, Or 8? with Illustrations and a P.S
DST 20 February 2015. P.1 of 13 How many valves per cylinder (revised) – 0, 1, 2, 3, 4, 5, or 8? With illustrations and a P.S. on 6 Since 1993 all Formula 1 engine designers have chosen 4 poppet valves per cylinder (2 inlet, 2 exhaust). In 2006 this layout was actually specified in the FIA regulations and the new 2014 rules continue it. Keith Duckworth, who created in 1966 a cylinder head having 4 valves per cylinder (4 v/c) opposed at a relatively narrow angle and combined them with port geometry and increased valve Lift/Diameter ratio to create in-cylinder “Barrel Turbulence” (aka “Tumble Swirl”) to raise combustion efficiency, set a benchmark to which, in time, all competitors conformed and which spread far outside the racing arena. In most of the past century this unanimity on 4 v/c did not exist. Racing 4-stroke piston engines were built with 2, 3, 4, 5, and 8 poppet valves per cylinder. This article follows the title subject generally from the series of 85 “Grand Prix Cars-of-the-Year”, 1906 – 2000, listed in this web site . Specifically this admits only 2, 3, and 4 valves per cylinder so, for general interest, substantial diversions have been included to other racing engines with a wider variety of arrangements In future references to “valve gear” it is to be understood that it refers to poppet valves opened by cams, directly or indirectly, and closed by steel springs forcing them to ride on the cam, unless otherwise mentioned (Desmodromic gear in Mercedes 1954-1955 (DVRS) and Pneumatic Valve Return Systems (PVRS) post-1990).
[Show full text]
Czech Technical University in Prague Faculty of Mechanical Engineering Department of Automotive, Combustion Engine and Railway Engineering
Czech Technical University In Prague Faculty of Mechanical Engineering Department of Automotive, Combustion Engine and Railway Engineering Master’s thesis Optimization of a Birotary Engine by means of a Simulation Model Supervisors: Ing. Ondřej Bolehovský Satrio Wicaksono ST, M.Eng., Ph.D. 2021 Bc. Daniel Piskač 2 Annotation Author: Bc. Daniel Piskač Title in English: Optimization of a Birotary Engine by means of a Simulation Model Title in Czech: Optimalizace birotačního spalovacího motoru pomocí simulačního modelu Academic year: 2020/2021 Study program: Master of Automotive Engineering Major: Advanced Powertrains Department, faculty: Department of Automotive, Combustion Engine and Railway Engineering, Faculty of Mechanical Engineering (CTU in Prague) Faculty of Mechanical and Aerospace Engineering (ITB) Supervisors: Ing. Ondřej Bolehovský Satrio Wicaksono ST, M.Eng., Ph.D. Abstract: This thesis consists of a review of rotary and birotary engines, update and calibration of the provided GT–Power model. It also includes proposing and creating a sub-model of clearances and optimization of the model. Keywords: Rotary engines, Birotary engines, Powertrain, Calibration, Clearances, Optimization, GT-Power Number of pages: 89 Number of figures: 73 3 Declaration I hereby declare that I have completed this thesis independently and that I have listed all the literature and publication used in accordance with the methodological guidelines about adhering to ethical principles in the preparation of the final thesis. In Prague, 5th of January, 2021 Bc. Daniel Piskač 4 Acknowledgements I would like to thank my supervisor Ing. Ondřej Bolehovský for guidance, support and help with the diploma thesis and KNOB ENGINES s.r.o., especially Bc. Václav Pieter for guidance, help, support and opportunity to work on this interesting topic.
[Show full text]
Sopwith Camel
Sopwith Camel Sopwith 2F.1 Camel A Sopwith Camel at the Imperial War Museum, London Type Biplane fighter Manufacturer Sopwith Aviation Company Maiden flight December 1916 Introduction June 1917 Primary users RFC (RAF) RNAS, AAF The Sopwith Camel Scout is a British First World War single-seat fighter aircraft that was famous for its maneuverability. Design and development Intended as a replacement for the Sopwith Pup, the Camel prototype first flew in December 1916, powered by a 110 hp Clerget 9Z. Known as the "Big Pup" early on in its development, the aircraft was armed with two .303 in (7.7 mm) Vickers machine guns mounted in the cowl, firing forward through the propeller disc. A fairing surrounding the gun installation created a hump that led to the name Camel. The type entered squadron service in June 1917 with No. 4 Squadron of the Royal Naval Air Service, near Dunkirk. The following month, it became operational with No. 70 Squadron of the Royal Flying Corps. By February 1918, 13 squadrons were fully equipped with the Camel. Approximately 5,500 were ultimately produced. Operational history Replica of Camel F.I flown by Lt. George A. Vaughn Jr., 17th Aero Squadron 1 This aircraft is currently displayed at the National Museum of the United States Air Force Sopwith Camel, 1930s magazine illustration with the iconic British WWI fighter in a dogfight with a Fokker triplane Unlike the preceding Pup and Triplane, the Camel was not considered pleasant to fly. The Camel owed its difficult handling characteristics to the grouping of the engine, pilot, guns, and fuel tank within the first seven feet of the aircraft, coupled with the strong gyroscopic effect of the rotary engine.
[Show full text]
National Air & Space Museum Technical Reference Files: Propulsion
National Air & Space Museum Technical Reference Files: Propulsion NASM Staff 2017 National Air and Space Museum Archives 14390 Air & Space Museum Parkway Chantilly, VA 20151 [email protected] https://airandspace.si.edu/archives Table of Contents Collection Overview ........................................................................................................ 1 Scope and Contents........................................................................................................ 1 Accessories...................................................................................................................... 1 Engines............................................................................................................................ 1 Propellers ........................................................................................................................ 2 Space Propulsion ............................................................................................................ 2 Container Listing ............................................................................................................. 3 Series B3: Propulsion: Accessories, by Manufacturer............................................. 3 Series B4: Propulsion: Accessories, General........................................................ 47 Series B: Propulsion: Engines, by Manufacturer.................................................... 71 Series B2: Propulsion: Engines, General............................................................
[Show full text]
The Rotary Aero Engine from 1908 to 1918
Explorations in the History of Machines and Mechanisms THE ROTARY AERO ENGINE FROM 1908 TO 1918 Giuseppe Genchi1 and Francesco Sorge1 1 Dipartimento di Ingegneria Chimica, Gestionale, Informatica, Meccanica – Università degli Studi di Palermo Abstract: The rotary aero engine is a special type of air-cooled radial engine, where the cylinders are arranged like the spokes of a wheel and turn around the crankshaft. The propeller is connected to the cylinders, while the crankshaft is fixed to the frame. The rotary aero engine, developed in 1908, set new standards of power and light weight within the aircraft industry. It was adopted by many pioneer aviators and widely used to set records of endurance, speed and height. Many aero engine manufacturers produced different models and variants of this type of engine, which was extensively used until the end of the First World War. The latest evolution of the rotary engine was the counter-rotary arrangement, which was devised and designed by the Siemens-Halske company. The distinctive feature of this type of engine was that the engine body (with cylinders and propeller) rotated in one direction while the crankshaft rotated in the opposite one. This result was obtained by using a bevel gear mechanism. However, rotaries were quickly and definitively replaced in 1918 by new kinds of conventional engine, which were developed in the same period by other manufacturers. The main features of rotary and counter-rotary aero engine and the performance limits that caused their decline will be described in this paper. The rotary engine will be compared with the conventional one in terms of power output, specific consumption, weight and inertia loads transferred to the frame.
[Show full text]
South Gloucestershire Compendium 1914 to 1918
South Gloucestershire Compendium 1914 to 1918 (with additional jottings on the history of certain local undertakings, organizations, and facilities) Rough notes compiled by John Penny Version 1 - July 2018 CONTENTS OVERVIEW OF SOUTH GLOUCESTERSHIRE 1914 - 1918 AUXILIARY MILITARY HOSPITALS IN SOUTH GLOUCESTERSHIRE Almondsbury, Badminton, Bitton, Chipping Sodbury, Downend, Hawkesbury, Horton, Pucklechurch, and Tockington THE BRITISH & COLONIAL AEROPLANE COMPANY AT FILTON Appendix 1 Activities at the British & Colonial Company’s Filton Flying Field 1911 - 1914 Appendix 2 Temporary aerodrome at Filton used for the ‘Circuit of Britain’ race in 1911 FILTON MILITARY AERODROME 1915 to 1920 Appendix Visit of the Dutch Bristol F.2B Fighter to Filton on 9 October 1919 YATE AERODROME DURING WORLD WAR ONE Appendix Notes on the post-war use of Yate Aerodrome INTERNMENT/PRISONER OF WAR CAMP AT YATE NATIONAL CONCRETE SLAB FACTORY AT YATE HAND GRENADE FILLING BY CRANE & COMPANY AT WARMLEY Appendix Notes on the history of the Warmley Firework Factory ARMY TRAINING AT CHIPPING SODBURY 5th Battalion Loyal North Lancashire Regiment; 12th Battalion, The Gloucestershire Regiment No.494 (Motor Transport) Company, Army Service Corps LINEAGE OF THE ROYAL GLOUCESTERSHIRE HUSSARS 1830 - 1915 MANUFACTURING MILITARY MOTOR CYCLE AT KINGSWOOD Appendix Notes on the Douglas family and the Kingswood motor cycle factory MAKING ARMY BOOTS IN THE KINGSWOOD AREA Appendix Notes on the history of G.B. Britton & Sons Ltd MAKING ARMY UNIFORMS IN STAPLE HILL Appendix Notes on the history of Wathen Gardiner & Company OVERVIEW OF SOUTH GLOUCESTERSHIRE 1914 - 1918 At the start of World War One Britain produced just 35% of the food it consumed, and so Germany's best chance of victory lay in starving Britain into surrender through a naval blockade.
[Show full text]
Edición 2018-V12 = Rev. 01
Sponsored by L’Aeroteca - BARCELONA ISBN 978-84-608-7523-9 < aeroteca.com > Depósito Legal B 9066-2016 Título: Los Motores Aeroespaciales A-Z. © Parte/Vers: 9/12 Página: 2401 Autor: Ricardo Miguel Vidal Edición 2018-V12 = Rev. 01 JAP.- UK.- (ver Aeronca y Aeronco) J.A. Prestwick & Company Ltd. de Londres fué un fabricante inglés de motocicletas conocido como John Alfred Prestwick. -Su primer motor aplicado a la aviación fué un 9 HP bicilíndrico de dos en V, en 1907, pesado y con poca fuerza. “JAP en un AVRO” -El siguiente fué en 1909, un 4V a 90º, enfriado por aire con válvulas de admisión y lumbreras de escape. Con 20 -Como vemos, se trata de un Avro triplano, con destino en HP. las fuerzas aéreas italianas, según la información recogida de la revista. -La JAP fué fundada por J.A. Prestwick en 1895 y en la ciudad de Tottenham. -Fué conocido por la fabricación de proyectores de ci nematograﬁ a y motores de combustión interna. Antes de los JAP Aeronca hizo el V4, vertical, que fué construído en 1910 y tenía 35 HP. -Uno de éstos motores se instaló en el avión australiano construido por Lawrence Marshall, volando en 1912. Es posible que el motor expuesto en el Museo “Australian National Air Museum” de Moorabbin. “20 HP” -Hizo motores con 30 HP y 35/40 HP (este último de V8). -Posteriormente pasó a la fórmula de cilindros horizon- tales opuestos como el 38 HP, o el J-99 de 36 HP en los Aeronca-JAP (el E-113C) extensivamente usado en UK.
[Show full text]
Oswald Boelcke
DH 2 ALBATROS D I/D II Western Front 1916 JAMES F. MILLER © Osprey Publishing • www.ospreypublishing.com DH 2 ALBATROS D I/D II Western Front 1916 JAMES F. MILLER © Osprey Publishing • www.ospreypublishing.com CONTENTS Introduction 4 Chronology 8 Design and Development 10 Technical Specifications 21 The Strategic Situation 38 The Combatants 43 Combat 49 Statistics and Analysis 71 Aftermath 76 Further Reading 79 Index 80 © Osprey Publishing • www.ospreypublishing.com INTRODUCTION While modern air forces employ time-tested, combat-proven tactics and decades-old aeroplanes designed on well understood aeronautical principles and built with ample time for testing and refining, air forces of World War I were literally writing the book on tactics and aeroplane design as dictated by the current state of the war. Indeed, throughout the conflict a perpetual reactionary arms race existed to counter and hopefully conquer the enemy’s latest aeroplane technology. Nowhere was this more evident than with single-seat scouts. Better known today as ‘fighter aeroplanes’, single-seat scouts were born as a direct result of two-seater aerial reconnaissance and artillery observation. Such infantry cooperation aeroplanes were crucial for the furtherance of army strategic and tactical planning for ground force success. This was particularly the case on the static Western Front, where trench-based warfare throttled any cavalry-based reconnaissance. Without exaggeration, two-seater photographic reconnaissance was as important in World War I as satellites are today. Naturally, it became desirable for all combatants not only to amass as much intelligence as possible via two-seater excursions over the frontlines but to simultaneously prevent the enemy from achieving the same.
[Show full text]