Thermo Scientific Solutions Automated Liquid Handling, Detection Model Cat

Total Page:16

File Type:pdf, Size:1020Kb

Thermo Scientific Solutions Automated Liquid Handling, Detection Model Cat THERMO SCIENTIFIC AUTOMATED LIQUID HANDLING, DETECTION AND SAMPLE PURIFICATION SOLUTIONS Versette™ RapidStak™ Also available: 96-and 384-channel Automated Microplate • A complete range of 96- and 384-well solid and strip microplates. Automated Liquid Handler Stacker • A complete line of sample storage tubes and equipment. • Total volume range 0.5-300 µl • Works seamlessly with • A complete range of Thermo Scientific manual and electronic • 96- and 384-channel interchangeable the entire Multidrop line of single and multichannel pipettes and tips. pipetting heads dispensers • Laboratory automation solutions for microplate instrument systems. • Compatible with D.A.R.T.sTM tips with • Schedule and automate any unique sealing properties two instruments with the • 6-position stage with compact dual level Thermo ScientificTM PolaraTM RS deck structure software For additional information contact your ™ • User-friendly programming options • Capacity from 30 to 150 plates Thermo Fisher Scientific sales representative or visit: with onboard touch screen or Thermo • Quick and easy setup www.thermoscientific.com/kingfisherinfo ScientificTM ControlMateTM PC software Model Cat. No. www.thermoscientific.com/versette RapidStak F01350 www.thermoscientific.com/multidrop RapidStak 2x F01351 Model Cat. No. www.thermoscientific.com/platereaders 30-Plate Stak Versette F01436 www.thermoscientific.com/wellwash Reference Guide Versette base unit 650-01-BS 50-Plate Stak F01437 www.thermoscientifc.com/ELISAsolutions 96- and 384-channel pipetting module for use with 650-02-NTC Polara RS Inquire 96- and 384-channel pipetting head 6-position stage 650-03-SPS Versette Pipetting Heads Orbitor RS™ 96-channel air displacement pipetting head. 650-06-9630 Volume 0.5-30 µl Automated Microplate Mover • Dedicated plate mover providing 96-channel air displacement pipetting head. 650-06-96300 quality, speed and flexible automation Volume 5-300 µl in a benchtop solution 384-channel air displacement pipetting head. 650-06-384100 • Provides reliable, precise automation of Volume 1-100 µl microplate handling for a wide range of instruments Note: You will need a Versette base unit, a pipetting module, a 6-position stage and one pipetting head • Capacity from 24-960 plates for a complete working unit. • Quick and easy set-up Thermo Scientific Solutions Automated Liquid Handling, Detection Model Cat. No. and Sample Purification iEMS™ Incubator/ Orbitor Workstation Configuration ORB0001 Shaker with automation workflow software Microplate Incubator For a list of all available parts ask your sales representative and Orbital Shaker for details. • Exceptional temperature uniformity across the plate • Efficient orbital shaking • Superior sensitivity and specificity for EIA assays • Temp range up to 40 °C, Model Cat. No. © 2013 Thermo Fisher Scientific Inc. All rights reserved. All (other) trademarks are the property and up to 69 °C on HT iEMS Incubator/Shaker HT, 5112250 of Thermo Fisher Scientific Inc. and its subsidiaries. • Capacity of up to nine plates, 1-cabin, 220–240 V three plates on the HT North America: USA/Canada +1 603 595 0505, USA toll free 800 345 0206; iEMS Incubator/Shaker HT, 5112257 Europe: Austria +43 1 801 40 0, Belgium +32 53 73 42 41, Finland +358 9 3291 0200, 1-cabin, 100–120 V France +33 2 2803 2000, Germany national toll free 08001-536 376, Germany international +49 6184 90 6940, Italy +39 02 95059 552, iEMS Incubator/Shaker, 5112200 Netherlands +31 76 571 4440, Nordic/Baltic countries +358 9 329 100, Russia/CIS +7 (495) 739 76 41, Spain/ 3-cabin, 220–240 V Portugal +34 93 223 09 18, Switzerland +41 44 454 12 12, UK/Ireland +44 870 609 9203 Asia: Australia +613 9757 4474, China +86 21 6865 4588 or +86 10 8419 3588, China toll free 800-810-5118, iEMS Incubator/Shaker, 5112207 400-650-5118, India +91 22 6716 2200, Japan +81-3-5826-1616, Korea +82 11 796 7771, Other 3-cabin, 100–120 V Asian countries +65 6872 9717 Countries not listed: +49 6184 90 6940 or +33 2 2803 2000 CTALHMIRefGuide 1516495 0113 THERMO SCIENTIFIC AUTOMATED LIQUID HANDLING, DETECTION AND SAMPLE PURIFICATION SOLUTIONS Multidrop™ Combi nL Varioskan™ Flash MultiskanTM GO KingFisher™ Duo Medium Throughput DNA/ Low Volume Reagent Dispenser Spectral Scanning Multimode UV/Vis Microplate RNA/Protein/Cell Purification • Volume range: 50 nl–50 μl Microplate Reader and Cuvette • Easy entry to low-volume dispensing • Flexible, fast and compact system for • Unlimited wavelength selection for Spectrophotometer • Flexible plate height adjustment (5–55 mm) diverse applications spectral analysis and measurement • 96-, 384- and 1536-well plate formats • Reads 96- and 384-well plates and • Process variety of sample types in at any single wavelength • Accurate, precise and reliable cuvettes • volumes ranging up to 5 ml • Fluorescence intensity, TRF, low-volume dispensing • Reads Thermo Scientific • Optimized DNA and RNA purification photometric and optionally • Easy-to-use visual user Model Cat. No. Model Cat. No. μDrop Plate in microliter-scale kits and protocols luminometric applications interface with color display measurements • Excellent traceability with complete Multidrop Combi nL, 5840400 • Up to three onboard dispensers for Varioskan Flash, 100–240 V 5250030 • Easy to maintain • Wavelength selection from data management 100–240 V, 50/60 Hz optimized kinetic reactions • Robotic compatible Varioskan Flash, 100–240 V, 5250040 200–1000 nm in 1 nm increments Model Cat. No. • Advanced Thermo ScientificTM • Thermo ScientificTM FILLitTM Software with bottom reading • Stand-alone or PC control in SkanIt® Software with optional 21 multiple languages Multiskan GO w/out cuvette, 100–240 V 51119200 for increased flexibility and functionality Varioskan LumiSens option 5250500 Model Cat. No. CFR Part 11 compliance • Fast spectral and end-point Multiskan GO with cuvette, 100–240 V 51119300 • Robotic compatible Dispenser option (1st, 2nd or 3rd) 5250510 measurements KingFisher Duo,100-240 V 5400100 • Robotic compatible Multidrop Combi Fluoroskan™ Ascent Reagent Dispenser Microplate Fluorometer KingFisher™ mL • Volume range: 0.5–2500 μl Multiskan FC Medium Throughput • Flexible plate height 5–50 mm Fluoroskan Ascent FL Microplate Photometer DNA/RNA/Protein/Cell • 6–1536-well plate formats Combined Microplate Fluorometer • Reliable and robust ELISA reader • Ultimate versatility for reagent Purification and Luminometer for research and routine applications dispensing • The economical choice for easy • Reads 1–384-well plates • Large color screen for easy • Autoclavable dispensing cassette operation up to 15 samples • Top/bottom reading stand-alone use • Easy-to-use visual user interface • Processing volumes from 50 to • Robotic compatible • Standalone or PC control in multiple with color display languages 1000 µl carried out in tube strips • Multidrop Combi SMART with • Up to three dispensers Model Cat. No. Model Cat. No. • Incubation and shaking • Advanced SkanIt Software inbuilt tracking system for Model Cat. No. • Reads 96- or 384-well plates Multiskan FC, 100–240 V 51119000 real-time tracking of dispensing Multidrop Combi, 100–240 V, 50/60 Hz 5840300 • High sensitivity Fluroskan Ascent, 100–240 V 5210470 • Robotic compatible Multiskan FC with incubator, 51119100 Model Cat. No. cassette usage Multidrop Combi with 5840310 100–240 V KingFisher mL, 100-240 V 5400050 • Robotic compatible SMART option, 100–240 V, 50/60 Hz Fluroskan Ascent, 100–240 V, 5210480 with one dispenser Fluroskan Ascent, 100–240 V, 5210482 Wellwash™ Versa with two dispensers Dual Strip Microplate Washer WellMate™ Fluroskan Ascent, 100–240 V, 5210483 • Large color display for ease of use Reagent Dispenser with three dispensers KingFisher™ Flex • Intuitive graphical user interface with multiple language versions • Accommodates 6-, 12-, 24-, 48-, Fluroskan Ascent FL, 100–240 V 5210450 High Throughput DNA/ 96-, 384-well plate formats • Optimal washing performance with • Simple on-board programming Fluroskan Ascent FL, 100–240 V, 5210460 RNA/Protein/Cell low residual volumes interface with one dispenser Purification • Un-pressurized bottles for safety and convenience • 1–2000 µl dispensing Fluroskan Ascent FL, 100–240 V, 5210462 • Increased flexibility and yield • Cell washing and 384-well plate volume range with two dispensers • Customized DNA/RNA isolation • Flexible dispensing options kits for variety of sample types Model Cat. No. washing for increased flexibility Fluroskan Ascent FL, 100–240 V, 5210463 • Robot compatibility for increased for a range of solutions • Excellent reproducibility KingFisher Flex with 96 PCR head, 5400610 Model Cat. No. with three dispensers throughput Model Cat. No. • Integrated stacking option for and high quality 100–240 V deep well labware and lidding/ WellMate, 100–240 V 201–10001 • Unique patented technology Wellwash Versa, 100–240 V, 50/60 Hz 5165010 delidding with the WellMate KingFisher Flex with KF head, 5400620 WellMate Stacker, 100–240 V 201–20001 Stacker. 100–240 V KingFisher Flex with 96 deep well 5400630 Luminoskan™ head, 100–240 V Wellwash Microplate Washer Ascent KingFisher Flex with 24 deep well 5400640 Microplate Luminometer head, 100–240 V • Large color display for ease of use Multidrop 384, • Intuitive graphical user interface • Reads 1–384-well plates with multiple language versions Multidrop DW • High sensitivity • Optimal washing performace • Up to three dispensers Reagent Dispensers Model Cat. No. with low residual volumes • Incubation and shaking • Un-pressurized bottles for safety Luminoskan Ascent, 100–240 V 5300160 • 96- and 384-well plate formats • Robotic compatible and convenience Model Cat. No. • Deep well plates Model Cat. No. Luminoskan Ascent, 100–240 V, 5300170 Wellwash, 100–240 V, 50/60 Hz 5165000 • 5–395 μl in 384, 20–995 μl in DW Multidrop 384, 220–240 V 5840150 with one dispenser • Precise and reliable dispensing • Autoclavable dispensing cassettes Multidrop 384, 100–120 V 5840157 Luminoskan Ascent, 100–240 V, 5300172 • Designed for ease of use with two dispensers Multidrop DW, 220–240 V 5840170 • Robotic compatible Luminoskan Ascent, 100–240 V, 5300173 Multidrop DW, 100–120 V 5840177 with three dispensers.
Recommended publications
  • Exploring Small-Scale Chemostats to Scale up Microbial Processes: 3-Hydroxypropionic Acid Production in S
    Lawrence Berkeley National Laboratory Recent Work Title Exploring small-scale chemostats to scale up microbial processes: 3-hydroxypropionic acid production in S. cerevisiae. Permalink https://escholarship.org/uc/item/43h8866j Journal Microbial cell factories, 18(1) ISSN 1475-2859 Authors Lis, Alicia V Schneider, Konstantin Weber, Jost et al. Publication Date 2019-03-11 DOI 10.1186/s12934-019-1101-5 Peer reviewed eScholarship.org Powered by the California Digital Library University of California Lis et al. Microb Cell Fact (2019) 18:50 https://doi.org/10.1186/s12934-019-1101-5 Microbial Cell Factories RESEARCH Open Access Exploring small-scale chemostats to scale up microbial processes: 3-hydroxypropionic acid production in S. cerevisiae Alicia V. Lis1, Konstantin Schneider1,2, Jost Weber1,3, Jay D. Keasling1,4,5,6,7, Michael Krogh Jensen1 and Tobias Klein1,2* Abstract Background: The physiological characterization of microorganisms provides valuable information for bioprocess development. Chemostat cultivations are a powerful tool for this purpose, as they allow defned changes to one single parameter at a time, which is most commonly the growth rate. The subsequent establishment of a steady state then permits constant variables enabling the acquisition of reproducible data sets for comparing microbial perfor- mance under diferent conditions. We performed physiological characterizations of a 3-hydroxypropionic acid (3-HP) producing Saccharomyces cerevisiae strain in a miniaturized and parallelized chemostat cultivation system. The physi- ological conditions under investigation were various growth rates controlled by diferent nutrient limitations (C, N, P). Based on the cultivation parameters obtained subsequent fed-batch cultivations were designed. Results: We report technical advancements of a small-scale chemostat cultivation system and its applicability for reliable strain screening under diferent physiological conditions, i.e.
    [Show full text]
  • Microscope Compatible Cell-Culture Incubator
    Microscope Compatible Cell-Culture Incubator BME 400 December 14th, 2016 Client: Dr. John Puccinelli, UW-Madison Dept. of Biomedical Engineering Advisor: Dr. Mitchell Tyler, UW-Madison Dept. of Biomedical Engineering Team Members: Trevor Zarecki - Team Leader Jenny Westlund - Communicator Peter Hartig - BPAG Jack McGinnity - BWIG Steve Gock - BSAC Abstract Live cell imaging experiments are difficult to perform over long periods of time on normal lab microscopes without incubation capabilities. Current commercial microscope-stage incubators are expensive, not compatible with multiple microscopes and ineffective at evenly controlling the environment. The client desires an inexpensive incubation chamber compatible with cell microscopy that is capable of maintaining desired temperature, CO2, and humidity evenly throughout the chamber. The device should not alter image quality, and should be accessible for changing media or cell culture dishes. An initial prototype has been developed that involves a small, cohesive system to regulate temperature, CO2, and humidity. Testing of the current prototype has demonstrated regulation of these three systems, through an automated feedback system capable of maintaining the system near a physiological set point. Further development of the design will ensure that it performs efficiently according to all specifications, and ultimately help bridge the gap in the market between high-cost, functional incubation systems and cheaper, less effective designs. 1 Table of Contents Introduction 3 Motivation 3 Existing
    [Show full text]
  • Effective Contamination Control with CO2 Incubators
    WHITE PAPER No. 30 Effective Contamination Control with CO2 Incubators Ines Kristina Hartmann¹, James Jarvis² ¹Eppendorf AG, ²Eppendorf, Inc. Executive Summary CO2 incubators provide an optimal cell growth environ- ment by maintaining a humidified atmosphere with temperature and carbon dioxide control. These conditions not only promote cell growth, but also the growth of contaminants, like bacteria, yeast, molds and other fungi. The contamination-reducing features of an incubator’s functional design and the effectiveness of its self-decon- tamination system must be considered in choosing an instrument. In this paper, we compare various strategies for preventing contamination in CO2 incubators, from the functional design of the device to self-disinfection programs. We also give some useful tips to prevent contamination when using CO2 incubators. Introduction Sources of contamination How do contaminants get into a CO2 incubator? Contamination is a major cause of frustration when culturing The CO2 incubator may become an indirect source of con- cells. There are many sources of contamination, either direct tamination. Unlike a biological safety cabinet, an incubator or indirect. Direct sources are contaminated reagents, media cannot prevent the influx of airborne contaminants, as the or seed culture. Media and reagents from reputable suppliers door must be opened during routine use. The incubator are rarely delivered contaminated nowadays. New cell lines chamber can also be contaminated by carelessness in aseptic can introduce contaminants into the lab, especially when techniques, and unnoticed splashes from cell culture vessels. they are given from lab to lab. They should be quarantined Some CO2 incubators use a HEPA filter to remove microor- before culturing with the rest of the cells.
    [Show full text]
  • Microbiology Laboratory Exercises Third Edition 2020
    MICROBIOLOGY Laboratory Exercises Third Edition Keddis & Rauschenbach 2020 Photo Credits (in order of contribution): Diane Davis, Ines Rauschenbach & Ramaydalis Keddis Acknowledgements: Many thanks to those in the Department of Biochemistry and Microbiology, Rutgers University, who have through the years inspired our enthusiasm for the science and teaching of microbiology, with special thanks to Diane Davis, Douglas Eveleigh and Max Häggblom. Safety: The experiments included in this manual have been deemed safe by the authors when all necessary safety precautions are met. The authors recommend maintaining biosafety level 2 in the laboratory setting and using risk level 1 organisms for all exercises. License: This work is licensed under a Creative Commons Attribution- NonCommercial-NoDerivatives 4.0 International License Microbiology Laboratory Exercises Third Edition 2020 Ramaydalis Keddis, Ph.D. Ines Rauschenbach, Ph.D. Department of Biochemistry and Microbiology Rutgers, The State University of New Jersey CONTENTS PAGE Introduction Schedule ii Best Laboratory Practices Iii Working in a Microbiology Laboratory iv Exercises Preparation of a Culture Medium 1 Culturing and Handling Microorganisms 3 Isolation of a Pure Culture 5 Counting Bacterial Populations 8 Controlling Microorganisms 10 Disinfectants 10 Antimicrobial Agents: Susceptibility Testing 12 Hand Washing 14 The Lethal Effects of Ultraviolet Light 15 Selection of Fungi from Air 17 Microscopy 21 Morphology and Staining of Bacteria 26 Microbial Metabolism 30 Enzyme Assay 32 Metabolic
    [Show full text]
  • Technical Guidance for Microbiology Incubators
    DRAFT – FOR DISCUSSION PURPOSES ONLY DEPARTMENT OF ENVIRONMENTAL PROTECTION Laboratory Accreditation Program Document Number: # Title: Microbiology Incubator Guidance Effective Date: Date Authority: 27 Pa.C.S. §§ 4101 – 4113 (relating to environmental laboratory accreditation), Environmental Laboratory Accreditation Regulations, 25 Pa. Code Chapter 252 Policy: It is the policy of the Department of Environmental Protection (DEP) to provide laboratory management personnel with the information necessary to either obtain or maintain accreditation to perform and report environmental analyses in Pennsylvania. Purpose: This technical guidance will provide laboratory management with the tools to develop procedures for maintenance and verification of incubation units used for microbiological testing that meet the requirements for laboratory accreditation. Applicability: This guidance will apply to all laboratories desiring to obtain and/or maintain accreditation under 25 Pa. Code Chapter 252. Disclaimer: The policies and procedures outlined in this guidance document are intended to supplement existing requirements. Nothing in the policies or procedures will affect regulatory requirements. The policies and procedures herein are not an adjudication or a regulation. There is no intent on the part of the Department to give these rules that weight or deference. This document establishes the framework within which DEP will exercise its administrative discretion in the future. DEP reserves the discretion to deviate from this policy statement if circumstances
    [Show full text]
  • Microlab® STAR™
    Microlab ® STAR™ Microlab ® STAR ™ AUTOMATED WORKFLOW SOLUTIONS CENTERED AROUND YOUR ASSAY The STAR combines Hamilton's patented pipetting technology including precise lock-and-key tip attachment, unrivaled liquid level detection, and comprehensive volume ranges to create flexible liquid handling workstations. Available in three base platform sizes, the STAR portfolio incorporates countless options to automate your workflows. Hamilton Robotics has also partnered with top leaders in the biotechnology industry to provide Standard Solutions based on commonly automated applications. Offering ready-to-start protocols for a variety of applications such as NGS, ELISA, and forensic assays, our Standard Solutions provide a faster way to automate your processes. 2 1 PATENTED TECHNOLOGY The STAR utilizes Hamilton’s proprietary Compressed O-Ring Expansion (CO-RE®) technology. CO-RE minimizes the production of aerosols and allows disposable tips or washable, steel needles to be used on channels in the same run. 2 MULTI-FUNCTIONAL ARM Our technology offers high pipetting accuracy and precision, from sub-microliter to large volumes, using Independent Channels and/or the Multi-Probe Head (MPH). Labware transportation is possible with the iSWAP® or CO-RE Grippers. The STAR can incorporate a camera, tube transportation, and other channel tools on a single arm. Comprehensive pipetting range: ■■■0.5 μL to 1 mL using the 1 mL Independent Channel ■■■50 μL to 5 mL using the 5 mL Independent Channel ■■■1 μL to 1 mL using the CO-RE 96 MPH ■■■0.1 μL to 50 μL using the CO-RE 384 MPH 3 FLEXIBLE SETUP The high-capacity deck is customized specific to your workflow, accommodating a wide range of labware and automated devices that can easily be exchanged to support multiple assays on one platform.
    [Show full text]
  • Orbital Shaker Benchmarks: Best Practices for Use and Maintenance
    APPLICATION NOTE Orbital shaker benchmarks: best practices for use and maintenance Authors: Mary Kay Bates, Senior Global Cell Culture Specialist and Sara Livingston, Global Product Manager, Thermo Fisher Scientific Key words: Orbital shaker, HEPA filter, cleaning, orbit diameter INTRODUCTION Most life science labs have an orbital shaker—often more than one— because these versatile workhorses are used in many applications including chemistry, biochemistry, molecular biology, microbiology, environmental and food sciences, clinical diagnostics, and eukaryotic Figure 1. Orbital shakers are available in a wide variety of sizes and formats. cell culture. Usage extends from basic research all the way up to maintenance schedule. In all cases, for before discarding any packing bioproduction. Shakers come in the manufacturer’s recommendations materials; some small parts can be a wide range of sizes and formats for each model take precedence and accidentally discarded. (Figure 1), including open air, heated, should be followed. or refrigerated. Choosing among Recognize that orbital shakers, these many options can be confusing, INSTALLATION regardless of size, can be heavier than and your application may require a Upon delivery of your new shaker, you may think. Take care when lifting specific shaker style1. inspect the shipping carton and the shaker, ensure you have at least ask the carrier to specify and sign one other person to help you, and that Regardless of the models used, this for any damage on your delivery the shelf or bench designated to hold application note contains valuable receipt, to ensure that any damage the shaker will be strong enough. information which applies to all to the components can be properly orbital shakers.
    [Show full text]
  • Kjeldahl Distillation Unit
    Terms of Business v There are frequent fluctuations in the cost of input. So we may not be able to give prior intimation regarding changes in the price structure. v Packing, Forwarding, Freight and Insurance will be Charged Extra. v Sales Tax and Excise Duty will be extra as per Central or State Government Rules. v Every possible care is taken in packing, but it is difficult to undertake responsibility of loss, breakage or damage during transit. v R/R and our bill be sent though V. P. P. or any scheduled bank. New customers are requested to advance 25% of the estimated value. v While placing the order, please give clear despatch instructions indicating C. S. T. Number, Name of Railway Station, Your Banker and Our Catalogue Number. v All problems shall be solved amicably subject to Ambala Jurisdiction. GUPTA SCIENTIFIC INDUSTRIES Ambala Cantt. THIS CANCELS OUR ALL PREVIOUS PRICE LISTS PPPrice List 2017-18 CATALOGUE CONTENTS Product Range Pages Interchangeable Standard Joints, Adapters, Stirrers, Condensers, 1 to 49 Laboratory Flasks, Columns, Separating Funnels, Assemblies, Glasswares Water Distillation, Essential Oil, Soxhlet Apparatus. Volumetric Burettes, Pipettes, Micro Pipettes, Measuring Cylinders, 50 to 74 Glasswares Measuring Flasks, Culture Tubes, Centrifuge Tube & Test Tubes. Sintered Sintered Crucibles, Funnels, Chromatography Columns and 75 to 84 Glasswares Filter Assembly. Gas Estimation Impinger, Gas Burettes, Tubes, Gas Wash Bottles, 85 to 90 Apparatus Oxygen Purity and Orsat Apparatus. Special Semi Micro Ware, Clinical Laboratory Apparatus, 91 to 97 Glasswares Electrodes and Milk Testing Apparatus. Supplementary Stopcocks, Rotaflow Screw Type Stopcocks, Teflon Key 98 to 123 Glasswares Stopcocks, Manometers, Weighing Bottles, S.
    [Show full text]
  • List of Equipments in the Department (Chemical Engineering) Mechanical
    List of Equipments in the Department (Chemical Engineering) Mechanical Operation lab Fluid Mechanics Lab Heat transfer Lab Mass Transfer lab • Cyclone Separator • Reynold’s Apparatus • Double Pipe Heat Exchanger • Tray Dryer • Plate & Frame Filter Press • Bernoulli’s Theorem Apparatus • Shell & Tube Heat Exchanger • Sieve Plate Distillation Column • Vibrating Screen • Pitot Tube Apparatus • Vertical Condenser • Liquid-Liquid Extraction • Jaw Crusher • Calibration of Orifice meter, • Computerized Control Shell & • Adsorption of CO 2 • Ball Mill Venturi meter and Rota meter Tube Heat Exchanger • Steam Distillation • Roll Crusher • Coefficient of Discharge of • Thermal Conductivity of Metal • Bubble Cap Distillation Column • Rotary Vacuum filter Orifice and Mouthpiece Bar • Cooling Tower • Fluidized Bed • Film & Drop Wise Condensation • Diffusivity Apparatus • Single Effect Evaporator • Fluidized Bed Dryer • Simple Steam Distillation • Simple Distillation • VLE Apparatus • Equilibrium Flash Distillation • Humidification & Dehumidification • Refractometer Process Control Lab Chemical Reaction Engg. Lab Fuel Combustion Energy Technology Lab Environmental Lab • Process Training Simulator with • Plug Flow Reactor • Flash & Fire Point Apparatus • BOD Incubator Modules (Software) • Isothermal Batch Reactor • Aniline Point Apparatus • pH Meter • Pressure Control System • Single Tube Packed Bed Reactor • Orsat Gas Analysis Apparatus • Sedimentation Apparatus • Flow Control System • RTD in CSTR / Mixed flow • Redwood Viscometer • UV-VIS Spectrophotometer • pH control System Reactor • Bomb Calorimeter • DO Meter • Real Time Simulator Trainer • RTD in Tubular Reactor • Smoke Point Apparatus • Digital Conductivity Meter • Level Control System • Adiabatic Batch Reactor • Temperature Control System • Distillation Column • Two Tank Interacting system • Two Tank Non-Interacting System • CSTR Control System Research Equipments • UV-Spectrophotometer • Gas Chomatography .
    [Show full text]
  • 3M™ Petrifilm™ Aerobic Count Plates Introduction SCIENTIFIC Petrifilm™ Plates Are Designed to Determine Total Aerobic Bacterial Populations
    3M™ Petrifilm™ Aerobic Count Plates Introduction SCIENTIFIC Petrifilm™ plates are designed to determine total aerobic bacterial populations. The easy-to-use BIO FAX! Petrifilm plates contain a film coated with nutrients and gelling agents. You will be able to monitor environmental bacterial counts using a variety of methods. Three environmental sampling methods are described as well as the standard inoculation procedure. Concepts • Microbiology • Plate counting Materials Petrifilm Aerobic Count Plates Incubator Petrifilm Spreader Pipet Chip clips Tape, double-sided Cotton swab, sterile Test tube, screwtop Safety Precautions Wear chemical-resistant gloves while working with microbial organisms. After use, Petrifilm Aerobic Count Plates will contain viable cultures. Do NOT reopen the Petrifilm plates or handle unnecessarily. Wash hands thoroughly with soap and water before leaving the laboratory. Extreme caution should be exercised when handling culture materials, and students should be trained in aseptic techniques. Always clean work areas and wash hands after working with microbiological materials. Procedures Standard Inoculation 1. Place the Petrifilm Aerobic Count Plate on a flat surface. Carefully peel open the Petrifilm plate being careful not to touch the nutrient gel with your fingers. (See Figure 1.) 2. With a pipet perpendicular to the Petrifilm plate, place 1 mL of sample (inoculum) onto the center of the bottom film. (See Figure 2.) 3. Release the top film; allow it to drop. Do not roll top film down. (See Figure 3.) Figure 1. Figure 2. Figure 3. FLAT side RIDGE side Figure 4. Figure 5. Figure 6. © 2016 Flinn Scientific, Inc. All Rights Reserved. Publication No. 10163 1 061616 3M™ Petrifilm™ Aerobic Count Plates continued 4.
    [Show full text]
  • DIVAS) to Determine Influence of Growth Rate on Invasion of Respiratory Epithelial Cells by Group B Streptococcus
    Use of a dynamic in vitro attachment and invasion system (DIVAS) to determine influence of growth rate on invasion of respiratory epithelial cells by group B Streptococcus Gennady Malin and Lawrence C. Paoletti* Channing Laboratory, Brigham and Women’s Hospital, Harvard Medical School, Boston, MA 02115 Edited by John J. Mekalanos, Harvard Medical School, Boston, MA, and approved September 20, 2001 (received for review February 16, 2001) Expression of capsular polysaccharide (CPS) and some surface Although harmless as a member of the normal human gut proteins by group B Streptococcus (GBS) is regulated by growth microflora, group B Streptococcus (GBS) can be life threatening rate. We hypothesized that precise control of GBS growth, and thus when vertically transmitted from a colonized mother to her surface-expressed components, could modulate the ability of GBS newborn during birth (8). Human isolates of GBS are sur- to invade eukaryotic cells. To test this hypothesis, a dynamic in rounded by capsular polysaccharide antigens (CPS), major vir- vitro attachment and invasion system (DIVAS) was developed that ulence factors that serve to protect GBS from host defense combines the advantages of bacterial growth in continuous culture mechanisms (9). Of the nine known GBS serotypes, type III is with tissue culture. Tissue culture flasks were modified with inlet the best studied because of its prevalence in cases of early-onset and outlet ports to permit perfusion of GBS. Encapsulated type III neonatal GBS disease. GBS strains M781 and COH1 and strains COH1-11 and COH1-13 Expression of several surface antigens of GBS, including type (transposon mutants of COH1 that express an asialo CPS or are III CPS and some important proteins, has been shown to be acapsular, respectively) were grown in continuous culture in a regulated by the rate of cell growth (10, 11).
    [Show full text]
  • CO2 INCUBATOR BUYING GUIDE Key Considerations When Purchasing a CO2 Incubator
    CO2 INCUBATORS CO2 INCUBATOR BUYING GUIDE Key Considerations When Purchasing a CO2 Incubator ® The Safer Choice for Your Laboratory NUAIRE.COM CO2 INCUBATORS A CRITICAL RESEARCH TOOL CO2 incubators provide an optimum environment for tissue cell culture growth in clinical and life science research laboratories. The parameters that contribute to optimum growth conditions are humidity, temperature control, sterility, CO2 gas control, and/or O2 control. Operated effectively, these incubators can maintain cells for extended periods of time, allowing for research and other necessary activities related to the cell and tissue culture contained within. Yet to assure that the cells are maintained in an environment in which they are protected requires purchasing the right incubator for your specific needs. To achieve that requires a strong awareness of the different aspects and features of today’s incubators. This buying guide covers the key considerations when making a purchase decision for a CO2 incubator. WATER JACKETED CO2 INCUBATORS Water has a greater specific heat capacity than air, so it is to maintain internal temperature four to five times longer frequently to used to regulate the interior temperature of lab than a direct heat incubator. incubators. The growth chamber is surrounded by a jacket of water [A] that is warmed by heating elements [B], which in Water-jacketed incubators, when filled, are very heavy and turn warms the growth chamber. must be emptied before being moved. Once moved and refilled, it can take as long as long as 24 hours to achieve Water circulates via convection, exchanging heat with the a stable operating temperature.
    [Show full text]