Occexcel Occ 2000 Soc Code Occtitle Indrst2k Naicsrst

Total Page:16

File Type:pdf, Size:1020Kb

Occexcel Occ 2000 Soc Code Occtitle Indrst2k Naicsrst OCCEXCEL OCC_2000 SOC_CODE OCCTITLE INDRST2K NAICSRST 896 51-9199 A mill operator 502 43-2021 A operator 668 51331 896 51-9199 A operator Exc. 668 Exc. 51331 930 53-5011 A.B. seaman #609 #483 593 43-9199 A.C.P. clerk 104 15-1041 A.D.P customer liaison 106 15-1061 A.D.P planner 110 15-1071 A.D.P system coordinator 110 15-1071 A.D.P systems security 200 21-1019 A.S.A.T. C.O.R.E. counselor 701 49-2011 A.T.M specialist 200 21-1019 AIDS counselor 610 45-3011 Abalone fisherman #028 #114 896 51-9199 Abalone processor (128) (3117) 930 53-5011 Able seaman #609 #483 182 19-3031 Abnormal psychologist 881 51-9121 Abrasive coating machine set up operator 874 51-9061 Abrasive grader 865 51-9021 Abrasive grinder 865 51-9023 Abrasive mixer (259) (3279) 872 51-9041 Abrasive wheel molder (259) (3279) 800 51-4033 Abrasive worker 864 51-9012 Absorber operator 863 51-8093 Absorption plant operator 207 32411 215 23-2093 Abstract clerk (727) (54119) 215 23-2093 Abstract searcher (727) (54119) 215 23-2093 Abstract writer (727) (54119) 215 23-2093 Abstractor (727) (54119) 194 19-4051 Accelerator operator 244 25-4031 Accessioner (677) (51412) 382 33-3021 Accident investigator 947 922 054 13-1031 Accident investigator Exc. 947 Exc. 922 385 33-3051 Accident prevention squad police officer 275 27-2042 Accompanist (856) (71113) 855 51-7099 Accordion maker #398 #33999 743 49-9063 Accordion tuner (888) (8114) 524 43-4051 Account adjuster 054 13-1031 Account analyst 699 524 511 43-3021 Account analyst 687-689 521, 522 080 13-2011 Account auditor 481 41-3021 Account executive 699 524 004 11-2011 Account executive 747 5418 485 41-4012 Account executive \ Any not listed \ Any not listed 480 41-3011 Account executive 647, 667, 728, 739 51111, 5131, 5132, 5412, 5416 482 41-3031 Account executive 687-697 521-523, 525 512 43-3031 Account information clerk 080 13-2011 Account or accountant bookkeeper, associate degree or higher 512 43-3031 Account or accountant bookkeeper, less than associate degree Account representative--See "Account executive" 080 13-2011 Accountant 512 43-3031 Accounting clerk, exc. machine operator 511 43-3021 Accounting clerk, machine operator 080 13-2011 Accounting consultant 511 43-3021 Accounting machine operator 080 13-2011 Accounting methods analyst 080 13-2011 Accounting systems analyst 512 43-3031 Accounting work (exc. accountant), less than associate degree 080 13-2011 Accounting work, accountant 080 13-2011 Accounting work, associate degree or higher 511 43-3021 Accounts adjustable clerk 510 43-3011 Accounts collector 512 43-3031 Accounts payable clerk 512 43-3031 Accounts receivable clerk 593 43-9199 Accuracy expert 864 51-9011 Acetone recovery worker (217) (3252) 814 51-4121 Acetylene burner 814 51-4121 Acetylene cutter 965 53-7071 Acetylene gas compressor 814 51-4121 Acetylene operator (368) (3366) 864 51-9011 Acetylene plant operator 814 51-4121 Acetylene torch burner 814 51-4121 Acetylene torch operator 814 51-4121 Acetylene torch solderer 814 51-4121 Acetylene welder 865 51-9023 Acid adjuster 864 51-9011 Acid bleacher 865 51-9023 Acid blower 864 51-9011 Acid cleaner 864 51-9011 Acid concentrator 864 51-9011 Acid condenser 896 51-9199 Acid conditioning worker 268, 269 3313, 3314 951 53-7021 Acid crane operator 886 51-9192 Acid dipper 963 53-7063 Acid dumper 864 51-9011 Acid extractor 896 51-9199 Acid filler 965 53-7072 Acid loader 864 51-9011 Acid maker 865 51-9023 Acid mixer 864 51-9011 Acid operator 896 51-9199 Acid painter (249) (3272) 864 51-9011 Acid patroller (217) (3252) 864 51-9011 Acid plant operator 864 51-9011 Acid polymerization operator 965 53-7072 Acid pump operator 864 51-9011 Acid purifier 864 51-9011 Acid recovery operator (207) (32411) 864 51-9011 Acid regenerator (217) (3252) 864 51-9011 Acid remover 864 51-9011 Acid retort operator (207) (32411) 896 51-9199 Acid splicer (238) (32621) 622 47-2021 Acid tank liner (077) (23) 864 51-9011 Acid tender 193 19-4041 Acid tester 207 32411 874 51-9061 Acid tester Exc. 207 Exc. 32411 864 51-9011 Acid treater 037, 207 211, 32411 190 19-4011 Acidity tester 018, 117, 447, 498 112, 3115, 4224, 4452 694 47-5099 Acidizer (037) (211) 624 47-2044 Acoustical carpenter 624 47-2044 Acoustical installer 624 47-2044 Acoustical material worker (077) (23) 243 25-4021 Acquisitions librarian 593 43-9199 Acreage reporter 949, 957 924-927 276 27-2099 Acrobat (856) (711) 274 27-2031 Acrobatic dancer (856) (711) 756 49-9096 Acrobatic rigger 775 51-2099 Action finisher (398) (3399) 775 51-2099 Action installer (398) (3399) 462 39-9032 Activities coordinator 462 39-9032 Activities counselor 462 39-9032 Activities director 321 29-1125 Activity therapist 270 27-2011 Actor (856) (711) Actor's agent--See "Booking agent" 270 27-2011 Actress (856) (711) 120 15-2011 Actuarial mathematician 120 15-2011 Actuary (699) (524) 592 43-9111 Actuary clerk 326 29-1199 Acupuncturist 825 51-5022 Ad compositor 199, 647 3231, 51111 285 27-3043 Ad copy writer 825 51-5022 Ad man 199, 647 3231, 51111 825 51-5022 Ad setter 199, 647 3231, 51111 Page 1 OCCEXCEL 535 43-4151 Ad taker #647 #51111 285 27-3043 Ad writer 285 27-3043 Adapter 657 5121 200 21-1011 Addiction counselor 511 43-3021 Adding machine operator 593 43-9199 Addresser 585 43-9051 Addressing machine operator 585 43-9051 Addressograph operator 896 51-9199 Adhesive bandage making operator 396 3391 211 23-1021 Adjudicator \ n.s. 524 43-4051 Adjudicator, clerical 211 23-1021 Adjudicator, legal activity 727 5411 054 13-1031 Adjuster \ any other type 467-579, 608, 699, 868, 869 44, 45, 482, 524, 722 775 51-2093 Adjuster \ n.s. 339 3344, 3346 896 51-9199 Adjuster \ n.s. 389 337 095 13-2099 Adjuster \ n.s. 687-689 52 211 23-1022 Adjuster arbitrator 054 13-1031 Adjuster, clerical 668 51331 702 49-2022 Adjuster, exc. clerical 668 51331 054 13-1031 Adjustment clerk 699 524 524 43-4051 Adjustment clerk Exc. 699 Exc. 524 354 29-9011 Adjustment examiner U.S. Social Security Board 948 923130 581 43-9021 Adjusto-writer operator 002 11-1021 Adjutant general 056 13-1041 Admeasurer 937-959 92 570 43-6011 Administrative aide 073 13-1199 Administrative analyst 637, 937-959 491, 92 586 43-9061 Administrative clerk 303 29-1031 Administrative dietitian 035 11-9111 Administrative officer 817-827 6215-6219, 622, 6231 Administrative officer--See "Official" Exc. 817-819, 827 Exc. 6215-6219, 622, 6231 034 11-9081 Administrator 829 6232-6239 035 11-9111 Administrator 817-827 6215-6219, 622, 6231 095 13-2099 Administrator of estate 233 25-2041 Administrator of special education Elementary school 786 611110 233 25-2042 Administrator of special education Middle school 786 611110 233 25-2043 Administrator of special education Secondary school 786 611110 Administrator--See "Official" Exc. 817-819, 827, 829 Exc. 6215-6219, 622, 623 526 43-4071 Admissions clerk 786, 787 6111-6113 593 43-9199 Admissions coordinator (827) (6231) 200 21-1012 Admissions counselor 787 6112, 6113 542 43-4199 Admissions evaluator 023 11-9033 Admissions officer 787 6112, 6113 500 43-1011 Admissions officer 819 622 442 39-3031 Admittance attendant 531 43-4111 Admitting clerk 819 622 454 39-6021 Admitting office escort 500 43-1011 Admitting officer 819 622 892 51-9195 Adobe block maker 622 47-2021 Adobe layer 892 51-9195 Adobe maker 201 21-1021 Adoption agent 201 21-1021 Adoption worker 050 13-1011 Advance agent (856) (711) 825 51-5022 Advertisement compositor 496 41-9099 Advertisement distributor 480 41-3011 Advertising agent 181 19-3021 Advertising analyst 535 43-4151 Advertising clerk 285 27-3043 Advertising copy writer 004 11-2011 Advertising director 560 43-5061 Advertising dispatch clerk 283 27-3041 Advertising editor 004 11-2011 Advertising executive 585 43-9051 Advertising inserter 825 51-5022 Advertising layout worker 199, 647, 648 3231, 511 263 27-1024 Advertising layout worker Exc. 199, 647, 648 Exc. 511, 3231 291 27-4021 Advertising photographer 480 41-3011 Advertising representative 480 41-3011 Advertising solicitor 535 43-4151 Advertising space clerk 285 27-3043 Advertising specialist 285 27-3043 Advertising writer 512 43-3031 Advice clerk 462 39-9032 Adviser \ n.s. 917 8132-8134 200 21-1012 Adviser \ n.s. 786, 787 6111-6113 593 43-9199 Adviser, clerical 215 23-2099 Advocate 626 47-2061 Adz worker (077) (23) 854 51-7042 Adzing and boring machine operator 903 53-2012 Aerial advertiser 747 5418 903 53-2012 Aerial crop duster #029 #115 710 49-2094 Aerial erector 903 53-2012 Aerial hurricane hunter 957, 959 926-928 720 49-3023 Aerial installer 357, 467-469, 509, 558, 877, 878 3361-3363, 4539, 4411-4413, 4471, 8111 742 49-9052 Aerial installer Exc. 357, 467-469, 509, 558, 877, 878 Exc. 3361-3363, 4539, 4411-4413, 4471, 8111 291 27-4021 Aerial photographer 903 53-2012 Aerial sprayer 952 53-7032 Aerial tram operator 037-039 211, 2121, 2122 276 27-2099 Aerialist 462 39-9031 Aerobics instructor 132 17-2011 Aerodynamicist 358, 359 33641 170 19-2012 Aerodynamicist Exc. 358, 359 Exc. 33641 155 17-3021 Aerographer 171 19-2021 Aerologist 154 17-3013 Aeronautical drafter 170 19-2012 Aerophysicist 481 41-3021 Agent \ any other type 699 524 050 13-1011 Agent \ n.s.
Recommended publications
  • Understanding Motivations and Impacts of Ridesharing: Three
    Préparée à Université Paris-Dauphine Understanding Motivations and Impacts of Ridesharing: Three Essays on Two French Ridesharing Platforms Composition du jury : Soutenue par Dianzhuo ZHU Maria GUADALUPE Professeure, INSEAD Présidente Le 08 06 2020 Philippe GAGNEPAIN École doctorale no543 Professeur, Université Paris 1 Panthéon- Rapporteur École Doctorale SDOSE Sorbonne, PSE Yannick PEREZ Professeur, Centrale Supélec, Univer- Rapporteur sité Paris-Saclay Spécialité Julien JOURDAN Sciences de Gestion Professeur, Université Paris-Dauphine, Examinateur PSL Stéphanie SOUCHE-LE CORVEC Professeure, Université de Lyon Examinatrice Éric Brousseau Professeur, Université Paris-Dauphine Directeur de thèse L’Université n’entend donner aucune approbation ou improbation aux opinions émises dans les thèses. Ces opinions doivent être considérées comme propres à leurs auteurs. ACKNOWLEDGEMENTS It is a long journey to accomplish a thesis. At the beginning of the journey, I could not imagine when and how it would end. However, while I am writing the acknowledgments, I also realize how time flies for the past four years and a few months. It has been an enriching expe- rience both in terms of building research and analytical skills and in terms of the connections with amazing people, without whom the thesis could not be accomplished. I would first like to thank my supervisor, Professor Eric Brousseau. Thank you for believing in the potential of the thesis topic that I spontaneously proposed. Thank you for being always supportive while leaving me the autonomy to follow my interests and to have the courage to fight against difficulties. Thank you for creating a great research team and for all the resources that you provide with the Governance and Regulation Chair and the Governance Analytics project.
    [Show full text]
  • Federal Railroad Administration Office of Safety Headquarters Assigned Accident Investigation Report HQ-2006-88
    Federal Railroad Administration Office of Safety Headquarters Assigned Accident Investigation Report HQ-2006-88 Union Pacific Midas, CA November 9, 2006 Note that 49 U.S.C. §20903 provides that no part of an accident or incident report made by the Secretary of Transportation/Federal Railroad Administration under 49 U.S.C. §20902 may be used in a civil action for damages resulting from a matter mentioned in the report. DEPARTMENT OF TRANSPORTATION FRA FACTUAL RAILROAD ACCIDENT REPORT FRA File # HQ-2006-88 FEDERAL RAILROAD ADMINISTRATION 1.Name of Railroad Operating Train #1 1a. Alphabetic Code 1b. Railroad Accident/Incident No. Union Pacific RR Co. [UP ] UP 1106RS011 2.Name of Railroad Operating Train #2 2a. Alphabetic Code 2b. Railroad Accident/Incident N/A N/A N/A 3.Name of Railroad Responsible for Track Maintenance: 3a. Alphabetic Code 3b. Railroad Accident/Incident No. Union Pacific RR Co. [UP ] UP 1106RS011 4. U.S. DOT_AAR Grade Crossing Identification Number 5. Date of Accident/Incident 6. Time of Accident/Incident Month Day Year 11 09 2006 11:02: AM PM 7. Type of Accident/Indicent 1. Derailment 4. Side collision 7. Hwy-rail crossing 10. Explosion-detonation 13. Other (single entry in code box) 2. Head on collision 5. Raking collision 8. RR grade crossing 11. Fire/violent rupture (describe in narrative) 3. Rear end collision 6. Broken Train collision 9. Obstruction 12. Other impacts 01 8. Cars Carrying 9. HAZMAT Cars 10. Cars Releasing 11. People 12. Division HAZMAT Damaged/Derailed HAZMAT Evacuated 0 0 0 0 Roseville 13. Nearest City/Town 14.
    [Show full text]
  • 300 Series Two Man Hole Diggers Operator Manuals
    OPERATOR MANUAL Includes Safety, Service and Replacement Part Information 300 Series Hole Diggers Models: 330H, 343H, 357H Form: GOM12070702 Version 1.2 Do not discard this manual. Before operation, read and comprehend its contents. Keep it readily available for reference during operation or when performing any service related function. When ordering replacement parts, please supply the following information: model number, serial number and part number. For customer service assistance, telephone 800.533.0524, +507.451.5510. Our Customer Service Department telefax number is 877.344.4375 (DIGGER 5), +507.451.5511. There is no charge for customer service activities. Internet address: http://www.generalequip.com. E-Mail: [email protected]. The products covered by this manual comply with the mandatory requirements of 98/37/EC. Copyright 2009, General Equipment Company. Manufacturers of light construction equipment Congratulations on your decision to purchase a General light construction product. From our humble beginnings in 1955, it has been a continuing objective of General Equipment Company to manufacture equipment that delivers uncompromising value, service life and investment return. Because of this continuous commitment for excellence, many products bearing the General name actually set the standards by which competitive products are judged. When you purchased this product, you also gained access to a team of dedicated and knowledgeable support personnel that stand willing and ready to provide field support assistance. Our team of sales representatives and in house factory personnel are available to ensure that each General product delivers the intended performance, value and investment return. Our personnel can readily answer your concerns or questions regarding proper applications, service requirements and warranty related problems.
    [Show full text]
  • The Revised Handbook for Analyzing Jobs
    This is a reproduction of a library book that was digitized by Google as part of an ongoing effort to preserve the information in books and make it universally accessible. https://books.google.com The Revised Handbook for Analyzing Jobs U.S. Department of Labor Employment and Training Administration - 1I . 1 a .1 i MM | • 1 \ \ j • far* ! \ > f | f • i ' 1 • ■ J : ■1 mm i 1 1 I ' • < - ' ffiiliKii ... * in .n mil i ifnrtriw ffiii * > l • \ / i r □ j | . - j Material in this publication is in the public domain and may be reproduced, fully or partially, without permission of the Federal Government. Source credit is requested but not required. Permis sion is required only to reproduce any copyrighted material contained herein. The Handbook for Analyzing Jobs (HAJ) contains the methodology Ml and benchmarks used by the cooperative Federal-State Occupational Analysis Program in gathering and recording information about jobs. Major Occupational Analysis products include the Dictionary of Occu pational Titles which contains occupational definitions of some 13,000 occupations, Selected Characteristics of Occupations Defined in the Dictionary of Occupational Titles, and the Guide for Occupational Exploration. All of these publications are available from the U.S. Government Printing Office. Since the first edition of the Handbook was published in 1944, changes and improvement in occupational analysis methodology have resulted in periodic revisions. This, the fourth revision, has been used by staff of State Occupational Analysis Field Centers since 1984. Dur ing this time, analysts have continued to refine the Handbook in order to reduce ambiguities and further refine procedures to facilitate accu rate and consistent gathering, synthesis, interpretation, and reporting of occupational information.
    [Show full text]
  • Broiler Chickens
    The Life of: Broiler Chickens Chickens reared for meat are called broilers or broiler chickens. They originate from the jungle fowl of the Indian Subcontinent. The broiler industry has grown due to consumer demand for affordable poultry meat. Breeding for production traits and improved nutrition have been used to increase the weight of the breast muscle. Commercial broiler chickens are bred to be very fast growing in order to gain weight quickly. In their natural environment, chickens spend much of their time foraging for food. This means that they are highly motivated to perform species specific behaviours that are typical for chickens (natural behaviours), such as foraging, pecking, scratching and feather maintenance behaviours like preening and dust-bathing. Trees are used for perching at night to avoid predators. The life of chickens destined for meat production consists of two distinct phases. They are born in a hatchery and moved to a grow-out farm at 1 day-old. They remain here until they are heavy enough to be slaughtered. This document gives an overview of a typical broiler chicken’s life. The Hatchery The parent birds (breeder birds - see section at the end) used to produce meat chickens have their eggs removed and placed in an incubator. In the incubator, the eggs are kept under optimum atmosphere conditions and highly regulated temperatures. At 21 days, the chicks are ready to hatch, using their egg tooth to break out of their shell (in a natural situation, the mother would help with this). Chicks are precocial, meaning that immediately after hatching they are relatively mature and can walk around.
    [Show full text]
  • Circuit Rider
    UNLV Theses, Dissertations, Professional Papers, and Capstones 5-2009 Circuit Rider Kimberley Harris Idol University of Nevada, Las Vegas Follow this and additional works at: https://digitalscholarship.unlv.edu/thesesdissertations Part of the Fiction Commons, Literature in English, North America Commons, and the Modern Literature Commons Repository Citation Idol, Kimberley Harris, "Circuit Rider" (2009). UNLV Theses, Dissertations, Professional Papers, and Capstones. 1170. http://dx.doi.org/10.34917/2533726 This Thesis is protected by copyright and/or related rights. It has been brought to you by Digital Scholarship@UNLV with permission from the rights-holder(s). You are free to use this Thesis in any way that is permitted by the copyright and related rights legislation that applies to your use. For other uses you need to obtain permission from the rights-holder(s) directly, unless additional rights are indicated by a Creative Commons license in the record and/ or on the work itself. This Thesis has been accepted for inclusion in UNLV Theses, Dissertations, Professional Papers, and Capstones by an authorized administrator of Digital Scholarship@UNLV. For more information, please contact [email protected]. CIRCUIT RIDER by Kimberley Harris Idol Bachelor of Arts Mount St. Mary's College, Los Angeles 1989 Masters of Science Mount St. Mary's College, Los Angeles 1994 Masters of Arts California State University of Northridge, Reseda 2003 A thesis submitted in partial fulfillment of the requirements for the Master of Fine Arts in Creative Writing Department of English University of Nevada, Las Vegas Graduate College University of Nevada, Las Vegas May 2009 UMI Number: 1472418 Copyright 2009 by Idol, Kimberley Harris INFORMATION TO USERS The quality of this reproduction is dependent upon the quality of the copy submitted.
    [Show full text]
  • Exceptional Works of Art 2017 PUSHKIN ANTIQUES – MAYFAIR –
    Exceptional works of art 2017 PUSHKIN ANTIQUES – MAYFAIR – At Pushkin Antiques we specialise in unique statement Each item is professionally selected and inspected pieces of antique silver as well as branded luxury items, to ensure we can give our customers a guarantee of stylish interior articles and objects d’art. authenticity and the required peace of mind when buying from us. Since the inception of our company, we’ve been at the forefront of online sales for high end, quality antiques. Our retail gallery is located on the lower floor of the world Our presence on most major platforms has allowed us famous Grays Antiques Centre in the heart of Mayfair. to consistently connect exquisite pieces with the most discerning collectors and interior decorators from all over the world with particular focus on the demands of the markets from the Far East, the Americas, Europe & Russia. www.pushkinantiques.com [email protected] We aim to provide the highest quality in every department: rare hand crafted articles, accurate item descriptions (+44) 02085 544 300 to include the history and provenance of each item, an (+44) 07595 595 079 extensive photography report, as well as a smooth buying process thus facilitating an efficient and pleasant online Shop 111, Lower Ground Floor, Grays Antiques Market. experience. 58 Davies St, London. W1K 5AB, UK. ALEX PUSHKIN OLGA PUSHKINA DUMITRU TIRA Founder & Director Managing Director Photographer Contents 6 ENGLISH SILVER 42 CHINESE SILVER 56 JAPANESE SILVER 66 INDIAN SILVER 78 BURMESE SILVER 86 CONTINENTAL SILVER 100 FRENCH SILVER 108 GERMAN SILVER 118 RUSSIAN SILVER 132 OBJECTS OF VERTU English Silver The style and technique in manufacturing silver during Hester Bateman (1708-1794) was one of the greatest this era (over 100 years) changed radically, reflecting silversmiths operating in this style, she is the most the variations in taste, society, costumes, economic and renowned and appreciated female silversmith of all time.
    [Show full text]
  • Pad Foot Slipper Foot
    PAD FOOT SLIPPER FOOT The most familiar foot of the To me, the slipper foot is the three, the pad foot has plenty most successful design for of variations. In the simplest the bottom of a cabriole leg, and most common version the especially when the arrises 3 rim of the foot is ⁄4 in. to 1 in. on the leg are retained and off the floor and its diameter gracefully end at the point is just under the size of the of the foot. There’s a blend leg blank. A competent 18th- of soft curves and defined century turner easily could edges that just works. This have produced it in less than particular foot design was 5 minutes, perhaps explaining taken from a Newport tea its prevalence. This is my table in the Pendleton House interpretation of a typical New collection at the Rhode Island England pad foot. School of Design Museum. 48 FINE WOODWORKING W270BR.indd 48 7/3/18 10:24 AM A step-by-step guide to creating three distinct period feet for the cabriole leg BY STEVE BROWN One Leg, Three Feet n the furniture making program at North Bennet Street School, students usually find inspiration for Itheir projects in books from our extensive library. They’ll find many examples of period pieces, but SLIPPER FOOT TRIFID FOOT they’ll also find more contemporary work. What they won’t find is any lack of possibilities. Sometimes limit- To me, the slipper foot is the The trifid foot is similar to the ing their options is the hard part.
    [Show full text]
  • HANDHELD TOOLS Selection, Innovation, Performance
    Selection, Innovation, HANDHELD Performance TOOLS Your One-Stop Shop for Hydraulic Tools and Attachments HANDHELD TOOLS HANDHELD TOOLS COMPANY OVERVIEW INDEX CATALOG INDEX WHY HYDRAULICS . 1 SUBMERSIBLE PUMPS . 25-26 PERCUSSION TOOLS . 2-9 POWER UNITS . 27-30 Breakers . 2-4 TWIN 8 . 27 Chipping Hammers . 5 HP8 . 28 Digger . 6 HP12 . 28 Post Driver . 7 TracHorse . 29 Post Puller . 7 Accessories . 30 Tampers . 9 HYDRAULIC SYSTEM REQUIREMENTS . 32 EARTH AUGER . .. 9 HYDRAULIC BASICS .. 33-34 CUTTING & TRIMMING TOOLS . 10-16 Hose Types . 34 Cut-Off Saws . 10 Hose Recommendations . 34 Wood-Cutting Chain Saws . 11-12 Recommended Hydraulic Fluids . 35 Concrete-Cutting Chain Saws . 13-14 SYSTEM SPECIFICATIONS . 36-40 Ductile Iron Pipe Saw & Pump . 15 HTMA Type I Hydraulic Systems . 36-37 Circular Saw & Pruners . 16 HTMA Type II Hydraulic Systems . 37 GRINDERS . 17 Testing a Hydraulic System . 38-40 WRENCHES & DRILLS . 18-24 Impact Wrenches & Drills . 19-21 Hydrant Saver . 22 Hammer Drills .. 23 GREAT BRAND, GREAT TOOLS Sinker Drills . .. 24 STANLEY has a proud tradition of being a global leader in the development of a wide range of innovative hydraulic products used in a variety of industries and applications throughout the world. As a proud member of STANLEY Black & Decker, a 175 year old company committed to the manufacture and distribution of quality tools for the professional, industrial, and consumer, we at Stanley Infrastructure are dedicated to providing our customers with innovative customer-driven product designs, world class quality, unmatched product support, and superior value. GLOBAL REPRESENTATION STANLEY Infrastructure produces an extensive line of products for use in construction, demolition, scrap processing, recycling, utilities, municipalities, railroads, industry, landscaping, underwater, construction, and specialty trades.
    [Show full text]
  • Railroad Operational Safety
    TRANSPORTATION RESEARCH Number E-C085 January 2006 Railroad Operational Safety Status and Research Needs TRANSPORTATION RESEARCH BOARD 2005 EXECUTIVE COMMITTEE OFFICERS Chair: John R. Njord, Executive Director, Utah Department of Transportation, Salt Lake City Vice Chair: Michael D. Meyer, Professor, School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta Division Chair for NRC Oversight: C. Michael Walton, Ernest H. Cockrell Centennial Chair in Engineering, University of Texas, Austin Executive Director: Robert E. Skinner, Jr., Transportation Research Board TRANSPORTATION RESEARCH BOARD 2005 TECHNICAL ACTIVITIES COUNCIL Chair: Neil J. Pedersen, State Highway Administrator, Maryland State Highway Administration, Baltimore Technical Activities Director: Mark R. Norman, Transportation Research Board Christopher P. L. Barkan, Associate Professor and Director, Railroad Engineering, University of Illinois at Urbana–Champaign, Rail Group Chair Christina S. Casgar, Office of the Secretary of Transportation, Office of Intermodalism, Washington, D.C., Freight Systems Group Chair Larry L. Daggett, Vice President/Engineer, Waterway Simulation Technology, Inc., Vicksburg, Mississippi, Marine Group Chair Brelend C. Gowan, Deputy Chief Counsel, California Department of Transportation, Sacramento, Legal Resources Group Chair Robert C. Johns, Director, Center for Transportation Studies, University of Minnesota, Minneapolis, Policy and Organization Group Chair Patricia V. McLaughlin, Principal, Moore Iacofano Golstman, Inc., Pasadena, California, Public Transportation Group Chair Marcy S. Schwartz, Senior Vice President, CH2M HILL, Portland, Oregon, Planning and Environment Group Chair Agam N. Sinha, Vice President, MITRE Corporation, McLean, Virginia, Aviation Group Chair Leland D. Smithson, AASHTO SICOP Coordinator, Iowa Department of Transportation, Ames, Operations and Maintenance Group Chair L. David Suits, Albany, New York, Design and Construction Group Chair Barry M.
    [Show full text]
  • Used Machinery January 2017
    Used Machinery January 2017 Machine Builder, Process and Packaging Solutions Provider Chocolate Processing Equipment Bauermeister SMM 800 4 x Petzholdt PVS 2000 Cocoa Nibs Mill Conches for dry conching, liquefying, homogenizing and Bauermeister KR13 degassing of low as well as high fat contents in chocolates and Cocoa nibs cleaner and de-stoner compound masses. Up to 2,500 kg Buhler Seedmaster pre- MacIntyre 5CR Mk12 3 ton crystallization process in refiner conche, age 1988 chocolate production LIPP IM-E900 chocolate Chocoma 4TX50 chocolate mixer, 940 litres, age 2001 temperer, 50 kg Chocolate melting tank Aasted DMW 500 Confitech FBT100 chocolate temperer, 500 kg/hr Tempering fondant beater, Age 2013 Sollich MSV 2000 Turbo 2 x Collmann Tempering Machine, hollow figure moulding line includes 2000 kg/hr cocoa butter press, spinners, depositors, cooling tunnels, Kreuter TMI 500 chocolate temperers and more. temperer, 500 kg/hr Low & Duff 300 one-shot Aasted 3000 temperer compact chocolate moulding line 3,000 kg/hr CEDA RS complete hollow chocolate forming line with wrappers Mazzetti 275 Shell Moulding Line Chocotech FD 490 Kreuter Favorit i S480C depositor Chocolate enrober, 480mm wide belt Knobel CCM 24/48 CAD- 2 x Sollich UT 420 enrober 21One-shot chocolate depositing machine Sollich Enrober TTS 620 temperer, 620mm wide belt Knobel CCM 36/72 Chocolate Depositor Kreuter Chocolate Enrober, 1200mm wide belt 2 x Knobel CCM 36-CAD- Sollich bottomer, 620mm wide 21 Chocolate Decorator Page 2 www.amp-rose.com Chocolate Wrapping Equipment 5 x
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]