DOCSLIB.ORG

TECH Tire Repair Chemicals for Best Results, Tech Nail Hole Repairs Should Be Used with These Tech Chemical Products

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
TECH Tire Repair Chemicals for Best Results, Tech Nail Hole Repairs Should Be Used with These Tech Chemical Products epair orld Leader in Tire R The W TECH INTERNATIONAL TIRE REPAIR CATALOG www.techtirerepairs.com TRUST TECH Table of Contents TIRE REPAIR PRODUCTS & REPAIR CHARTS Pages 3 – 25 Uni-Seal Ultra Repairs . 3 – 4 Uni-Seal 2-piece Stems & Repairs . 5 – 7 Centech Radial Repairs for Shoulder Injuries . 6 Radial Section Repairs . 8 – 10 Bias Ply Tire Repairs. 11 – 13 Radial OTR Repairs . 14 – 18 Tech Off Road (TOR) Bias Repairs . 19 – 21 Repair Rubber and Chemicals . 22 – 24 2-Way Tube Repairs & All-Purpose Repairs. 25 NAILHOLE INSERTS & REPAIR KITS Pages 26 – 28 Permacure Repairs & Kits . 26 Flow-Seal Inserts & Self-Vulcanizing Repairs . 27 Repair Kits . 28 CABINETS & REPAIR TOOLS Pages 29 – 31 Cabinets & Tool Stations. 29 Hand Tools and Knives, Extruder Guns . 30 – 31 & Branding Irons PRODUCT PAGES Pages 32 – 33 Tire Inspection & Marking Tools . 32 – 33 Anti-Seize Compound. 33 SAFETY, PROTECTION & HAND CLEANING PRODUCTS Page 34 AIR TOOLS & ACCESSORIES Pages 35 – 41 Drills, Buffers & Air Hammers . 35 Cutters, Burrs, Grinding Stones, Wheels & Rasps . 36 – 39, 41 Wire Brushes, Buffing Stones. 40 Gouges & Cut-Off Wheels . 41 MONAFLEX VULCANIZING EQUIPMENT & SPOTTERS Pages 42 – 47 TIRE & WHEEL SERVICE LUBRICANTS Pages 48 – 49 TIRE IDENTIFICATION Page 50 Radio Frequency Identification Data Tags (RFID) . 50 Tire Identification Logos . 50 TIRE SPREADERS Page 51 Tech International Tire Repair Catalog TIRE BALANCING & SEALANT PRODUCTS Pages 52 – 53 Balance Pads, Tools & Chemicals . 52 Balancing Compound & Tire Sealant . 53 TPMS SOLUTIONS Pages 54 – 57 VALVES & VALVE HARDWARE Pages 58 – 73 AIR SERVICE PRODUCTS Pages 74 – 78 Gauges . 74 Automatic Tire Inflators. 76 Chucks & Chuck Repair Kits. 77 Air Couplers . 78 IMPACT WRENCHES & SOCKETS Pages 79 – 84 WHEEL SERVICE PRODUCTS Pages 85 – 87 Fasteners . 85 Stud Cleaners , Nut Wrenches & Wheel Protectors . 86 – 87 TIRE & RIM SERVICE PRODUCTS Pages 88 – 98 OTR Bead Breakers & Tire Service Products. 88 – 89 Ken-Tool Tire & Rim Service Products . 90 – 93 Gaither Tire Inflation & Tire Changing Products . 94, 95, 98 Jacks & Lifting Products . 96 – 97 WHEEL WEIGHTS, KITS & TOOLS Pages 99 – 110 AUTOMOTIVE SERVICE PRODUCTS Pages 111 – 117 Tire Changer Products & Supplies . 111 – 113 Wheel Balancer Products . 114 Brake Lathe Products . 114 – 115 Lift Pads . 115 Lug Nuts, Cable Ties & Spare Tire Keys . 116 Abrasives . 117 PRODUCT INDEX Pages 118 – 122 TRAINING MATERIALS & INFORMATION Pages 123 – 125 Chart Directory Headquartered in REPAIR CHART Page Johnstown, Ohio and founded in 1939, AX Aramid Reinforced Radial OTR Tech International is Repair Chart . 18 the world’s leading Bias 2-Piece Nail Hole Repair Limitations . 7 producer of tire and tube repairs and wheel BP Bias Repair Charts . 13 service solutions. Centech & Thermacure Radial Repair Charts . 10 Today, Tech markets Centech Aramid Reinforced Radial OTR Repair Charts . 15 products into more Centech OTR Repair Recommendations - Chemical, than 110 countries throughout the world. Thermacure, Cloth Backed and Heat Cure . 14 In addition to its own OTR Vulcanizing System Radial/Bias Ply Application Chart . 43 line of quality products, Tech offers a vast Radial 2-piece Nail Hole Repair Limitations . 7 selection of tools, Tech AX Severe Service Radial Repairs . 16 service items and equipment from Tech Bias Skidder Tire Repair Chart . 12 industry-leading Tech Off Road (TOR) & Bias Skidder Repair Chart . 21 manufacturers. The company is recognized Tech Off Road (TOR) Bias OTR Repairs . 20 as one of the top Tech Radial OTR Repair Chart Centech exporters in the United Aramid Reinforced Repairs. 17 States and has received numerous Tech Uni-Seal Ultra, Uni-Seal Ultra Max & Bias Uni-Seal export awards from Repair Limitations Chart for Radial and Bias Crown Injuries . 4 the U.S. Chamber of Commerce, and the Ohio Department of Commerce. Tech has also been honored by receiving both the U.S. Presidential “E-Star” Awards for excellence in exporting. TECH Uni-Seal Ultra Repairs Tech Uni-Seal Ultra one-piece repair units provide a simple, quick, and safe TIRE REP method to properly repair radial and bias tires. Tech Uni-Seal Ultras have passed the most stringent tire test standards in the world, including the US FMVSS139 New Tire Proper tire repair. Endurance Test. These repairs meet or exceed international tire industry guidelines AIR PRODUCTS & REP for proper puncture repair, such as the ECE 108 & 109 Regulations. Tires repaired with Uni-Seal Ultras are permanently filled by the stem and reinforced by the thick rubber cap. The stem and cap of the repair seal and vulcanize to the tire with Tech's thick chemical cushion gum. The 290UL, UL10N is an excellent repair for self-sealing truck tires produced with sealant beneath the inner liner. Refer to Tech How-To-Repair Manual RM-4 or Repair Video RDVD1 for installation procedures and limitations. Improper tire repair. AIR CHAR UNI-SEAL ULTRA REPAIRS FOR RADIAL AND BIAS TIRES Cat. Prepared Box TS No. Description Injury Size Qty. 249UL UL3 UNI-SEAL ULTRA 3mm, 1/8” 24 250UL UL6 UNI-SEAL ULTRA 6mm, ¼” 14 S1040 250UL 250UL/24 UL6 UNI-SEAL ULTRA 6mm, ¼” 24 270P 251UL UL8 UNI-SEAL ULTRA 8mm, 5/16” 14 270 251UL/24 UL8 UNI-SEAL ULTRA 8mm, 5/16” 24 290UL UL10N UNI-SEAL ULTRA 10mm, 3/8” 10 269 CC3 CARBIDE CUTTER 3mm, 1/8” 1 270 CC6 CARBIDE CUTTER 6mm, ¼” 1 270P CC6P CARBIDE CUTTER 6mm, ¼” 1 S1043 249UL for passenger tires 269 S1041 271 CC8 CARBIDE CUTTER 8mm, 5/16” 1 271/38 CC10 CARBIDE CUTTER 10mm, 3/8” 1 271 251UL S1043 QUICK CHANGE ADAPTOR for CC3 1 S1040 QUICK CHANGE ADAPTOR for CC6, CC6P 1 S1041 QUICK CHANGE ADAPTOR for CC8 1 911 2mm ALLEN WRENCH 1 for small QC adaptors TECH Uni-Seal Ultra Max Repairs Tech Uni-Seal Ultra Max one-piece repair units provide a simple, quick, and safe method to properly repair commercial truck tires, agricultural tires, industrial and small OTR tires. Tech Uni-Seal Ultra Max repairs are produced with cross-weave reinforcement for radial or bias tires, a lead wire molded in the stem for quick installation, and Tech's thick chemical cushion gum on the stem and cap for permanent vulcanization to the tire. These repairs meet or exceed international tire industry guidelines for proper puncture repair. UNI-SEAL ULTRA MAX REPAIRS FOR RADIAL AND BIAS TIRES Cat. Prepared Box No. Description Injury Size Qty. 291UL UL10 UNI-SEAL ULTRA MAX 10mm, 3/8” 10 292UL UL13 UNI-SEAL ULTRA MAX 13mm, ½” 10 271/38 CC10 CARBIDE CUTTER 10mm, 3/8” 1 291UL 272 CC13 CARBIDE CUTTER 13mm, ½” 1 S1041/38 271/38 292UL S1041/38 QUICK CHANGE ADAPTOR 1 272 TRT105 for CC10 & CC13 912 3mm ALLEN WRENCH for S1041/38 1 QC adaptor (not shown) 3 Tech Bias Uni-Seals provide a simple, safe, TECH Uni-Seal permanent method to properly repair ½”, 13mm and ¾”, 20mm injuries in bias truck, agricultural, industrial Repairs for and small OTR tires. The oversized stem fills the injury while the fabric reinforced cap restores the integrity to Bias Tires the tire. Both the stem and cap permanently vulcanize TS to the tire with Tech's thick chemical cushion gum. UNI-SEAL BIAS REPAIRS AIR CHAR Cat. Prepared Box No. Description Injury Size Qty. 252 BIAS UNI-SEAL 13mm, ½” 6 253 BIAS UNI-SEAL 14 ply rated 20mm, ¾” 6 262 BIAS CUTTER 13mm, ½” 1 263 BIAS CUTTER for 253 20mm, ¾” 1 253 252 AIR PRODUCTS & REP TIRE REP 263 262 BIAS TIRE RADIAL TIRE T CROWN AREA T T CROWN AREA* T TECH Uni-Seal Ultra, Uni-Seal Ultra Max & Bias Uni-Seal Repair Limitations Chart Angles greater than 25 require a 2 piece repair system to be used. *Radial tire crown area begins 1” (25mm) from tread edge on passenger tires, or 1½” (40mm) on all truck and ag. tires. RADIAL AND BIAS CROWN INJURIES Prepared H, V, Z T Rated Light Medium Ag, REPAIRS MUST NOT Crown Rated & Tires & Truck & Heavy Industrial OVERLAP! Injury Run Flat Tires Below Tires Truck Tires & Small Size (limit 1) OTR Tires 3mm UL3 UL3 REPAIRS MUST NOT BE IN THE 6mm UL6 UL6 UL6 UL6 SAME BODY PLY! 8mm UL8 UL8 10mm UL10 UL10 UL10 13mm UL13 UL13 UL13 4 TECH Uni-Seal Ultra CC6 (270) ULS6 (250-1UL) Stems for 2-Piece Repair Tech Uni-Seal Ultra stems feature a lead wire for quick easy installation in prepared tire injuries. Each stem is wrapped with Tech's thick chemical cushion gum which permanently TIRE REP fills, seals, and vulcanizes to the tire. The photo (right) shows a 6mm (1/4”) prepared injury and the same size injury filled with a ULS6 Uni-Seal Ultra Stem. These stems must be used in conjunction with the appropriate repair unit on the AIR PRODUCTS & REP inside of the tire. Refer to repair charts on page 7. UNI-SEAL ULTRA STEMS FOR 2-PIECE REPAIR Cat. Prepared Box No. Description Injury Size Qty. 250-1UL ULS6 UNI-SEAL ULTRA STEM 6mm, ¼” 20 251-1UL ULS8 UNI-SEAL ULTRA STEM 8mm, 5/16” 20 291-1UL ULS10 UNI-SEAL ULTRA STEM 10mm, 3/8” 20 270 CC6 CARBIDE CUTTER 6mm, ¼” 1 270P CC6P CARBIDE CUTTER 6mm, ¼” 1 AIR CHAR for passenger tires 271 CC8 CARBIDE CUTTER 8mm, 5/16” 1 271/38 CC10 CARBIDE CUTTER 10mm, 3/8” 1 S1040 QUICK CHANGE ADAPTOR for CC6, CC6P 1 TS 250-1UL 251-1UL S1041 QUICK CHANGE ADAPTOR for CC8 1 S1041/38 QUICK CHANGE ADAPTOR for CC10 1 911 2mm ALLEN WRENCH for 1 small QC adaptors (not shown) 912 3mm ALLEN WRENCH for S1041/38 1 QC adaptor (not shown) Uni-Seal stems are designed to fill large punctures in truck, agricultural, industrial, and TECH Uni-Seal small OTR tires.
Load more

Recommended publications
  • United States Patent (19) (11) 4,161,455 Wason 45) Jul
    United States Patent (19) (11) 4,161,455 Wason 45) Jul. 17, 1979 (54) NOVEL PRECIPITATED SILICEOUS 57 ABSTRACT PRODUCTS AND METHODS FORTHER A method for producing a precipitated silicon dioxide USE AND PRODUCTION having a new combination of physical and chemical Satish K. Wason, Havre de Grace, properties is disclosed. The pigments are produced by 75 Inventor: acidulating a solution of an alkali metal silicate with an Md. acid under controlled precipitation conditions. The 73) Assignee: J. M. Huber Corporation, Locust, aqueous reaction medium comprising the precipitated N.J. silica is then post-conditioned by introducing a second silicate solution into the reaction vessel and thereafter 21) Appl. No.: 911,003 adding additional acid to react with the said second 22 Filed: May 30, 1978 silicate solution. By varying the amount of the silicate employed in the post-conditioning step, a product is Related U.S. Application Data obtained which has a unique combination of physical and chemical properties including reduced wet cake 60) Continuation of Ser. No. 796,913, is a division of Ser. moisture content, high surface areas and oil absorptions, No. 557,707, Mar. 12, 1975, abandoned. improved surface activity, friability, wetting character (51) Int. Cl’............................................... C11D 3/08 istics, and the like. The product has particular utility for (52) U.S. C. ............................... 252/174.25; 252/135; use as a rubber reinforcing agent because of its in 252/140; 106/288 B; 423/339 creased surface activity and oil absorption, etc. The (58) Field of Search ......................... 252/89, 135, 140; product, however, may be used in paints, paper, deter 423/339; 106/288B gents, dentifrice compositions, molecular sieves, and polymeric compositions.
    [Show full text]
  • Modern Rubber Chemicals, Compounds and Rubber Goods Technology
    MODERN RUBBER CHEMICALS, COMPOUNDS AND RUBBER GOODS TECHNOLOGY Click to enlarge DescriptionAdditional ImagesReviews (0)Related Books The book covers Natural Rubber, Basic Concepts of Synthetic Rubber, Styrene Butadiene Rubber, Polybutadiene, Polychloroprene and Polyisoprene Rubbers, Butyl and Nitrile Rubber, Miscellaneous Rubbers, Latex Product Manufacturing Technology, Foam Products Manufacturing Technology, Plasticisers, Factice and Blowing Agents, Moulding and Finishing of Rubber Components, Compounding Ingredients and Compound Design, Footwear Technology, Conveyor Belt Technology, V-Belt and Fan Belt Manufacturing Technology, Hose Technology, Rubber Sports Goods Manufacturing Technology, Cable Technology, Rubber-To-Metal Bonding Components, Rubber-Covered Rolls, Sealing Technology, Nitrile Rubber and Its Application in Construction Industry, Rubber-Resin Pressure Sensitive Adhesive Tape Technology, Test Methods in Rubber Industry, Recycling of Wastes from Rubbers and Plastics. MODERN RUBBER CHEMICALS, COMPOUNDS AND RUBBER GOODS TECHNOLOGY NATURAL RUBBER Introduction Sources and the Plantation Economy Tapping of Natural Rubber (NR) Latex Recovery of Natural Rubber from Latex Coagulation, Processing of the Coagulate, Sheets, and Crepe Smoked Sheets Pale Crepe Special Grades Oil Extended Natural Rubber (OE-NR) Deproteinated Natural Rubber (DP/NR) Heveaplus MG Grades Epoxidised Natural Rubber (ENR) Thermoplastic NR Depolymerised NR Powdered or Particulate NR Peptised NR Classification of Hevea Rubber (TSR) Technically Classified NR (TC)
    [Show full text]
  • Polymer Chemistry Sem-6, Dse-B3 Part-3, Ppt-3
    POLYMER CHEMISTRY SEM-6, DSE-B3 PART-3, PPT-3 Dr. Kalyan Kumar Mandal Associate Professor St. Paul’s C. M. College Kolkata Polymer Chemistry Part-3 Contents • Styrene Based Copolymers • Poly(Vinyl Chloride): A Thermoplastic Polymer Styrene Based Copolymers Styrene-Acrylonitrile (SAN) Copolymers and ABS Resins • To obtain a styrene-based polymer of higher impact strength and higher heat distortion temperature at the same time, styrene is copolymerized with 20-30% acrylonitrile. Such copolymers have better chemical and solvent resistance, and much better resistance to stress cracking and crazing while retaining the transparency of the homopolymer at the same time. In many respects SAN copolymers are also better than poly(methyl methacrylate) and cellulose acetate, two other transparent thermoplastics. • ABS resins are terpolymers of acrylonitrile, butadiene and styrene, prepared by interpolymerization (grafting) of styrene and acrylonitrile on polybutadiene or through blending of SAN copolymers with butadiene–acrylonitrile (Nitrile) rubber. Impact improvement is far better if the rubber in the blend is lightly cross-linked. The impact resistance of ABS resins may be as high as 6-7 ft lb. per inch of notch. This Lecture is prepared by Dr. K. K. Mandal, SPCMC, Kolkata Styrene-Acrylonitrile (SAN) Copolymers • Styrene acrylonitrile resin is a copolymer plastic consisting of styrene (Ph-CH=CH2) and acrylonitrile (CH2=CH-CN). It is also known as SAN. It is widely used in place of polystyrene owing to its greater thermal resistance. • The chains of between 70 and 80% by weight styrene and 20 to 30% acrylonitrile. Larger acrylonitrile content improves mechanical properties and chemical resistance, but also adds a yellow tint to the normally transparent plastic.
    [Show full text]
  • Sumitomo Rubber Produces Truck, Motorcycle and Automobile Tires and Is Located at 10 Sheridan Drive in the Town of Tonawanda, Erie County
    Facility DEC ID: 9146400030 PERMIT Under the Environmental Conservation Law (ECL) IDENTIFICATION INFORMATION Permit Type: Air Title V Facility Permit ID: 9-1464-00030/00199 Effective Date: 01/23/2018 Expiration Date: 01/22/2023 Permit Issued To:SUMITOMO RUBBER USA, LLC PO BOX 1109 BUFFALO, NY 14240-1109 Contact: MARK R CRAFT SUMITOMO RUBBER USA LLC PO BOX 1109 BUFFALO, NY 14240-1109 (716) 879-8497 Facility: SUMITOMO RUBBER USA LLC 10 Sheridan Dr Tonawanda, NY 14150 Contact: MARK R CRAFT SUMITOMO RUBBER USA, LLC PO BOX 1109 BUFFALO, NY 14240-1109 (716) 879-8497 Description: Sumitomo Rubber produces truck, motorcycle and automobile tires and is located at 10 Sheridan Drive in the Town of Tonawanda, Erie County. The ownership changed from Goodyear Dunlop Tires North America, Ltd. to Sumitomo Rubber USA, LLC during the first half of 2016, and the facility is now called Sumitomo Rubber. The facility produces about 12,000 tires a day. The facility consists of 1.9 million square feet of manufacturing and warehousing on 130+ acres of land. This permit includes a multiyear project to increase production. The facility mixes all the ingredients together to make rubber, extrudes rubbers into shapes, combines metal and fabric into rubber strips (calendaring), assembles tires, vulcanizes and cures tires, shapes finished tires, and performs quality assurance and quality control on the final products which are then stored in a large warehouse on site. Five boilers generate process steam and heat at for the facility. Four boilers are dual fuel, natural gas and residual oil. One boiler burns only natural gas.
    [Show full text]
  • Modelling the Evolution of Tyre Performance in a Motorsport Application Analysis of Effects on Vehicle Performance in a Real-Time Simulation Environment
    Modelling the Evolution of Tyre Performance in a Motorsport Application Analysis of Effects on Vehicle Performance in a Real-Time Simulation Environment Master’s thesis in Automotive Engineering Håkan Richardson Department of Applied Mechanics CHALMERS UNIVERSITY OF TECHNOLOGY Gothenburg, Sweden 2017 Acknowledgment This thesis was made possible by Cyan Racing through guidance by Mikael Mohlin, organisation by Erik Olofsson, track support from Per Blomberg and simulator support from Christoffer Routledge, but also valuable input from the entire engineering staff. Having the opportunity to utilise the simulator facility in collaboration with their driver, Nicky Catsburg, offered an extraordinary way to evaluate the model and discuss subjective aspects of tyre performance. Chalmers University of Technology have provided a robust academic framework with Bengt Jacobson as examiner and Anton Albinsson as supervisor. This has been a valuable source of knowledge and a great forum for discussing modelling challenges. MASTER’S THESIS IN AUTOMOTIVE ENGINEERING Modelling the Evolution of Tyre Performance in a Motorsport Application Analysis of Effects on Vehicle Performance in a Real-Time Simulation Environment Håkan Richardson Department of Applied Mechanics Division of Vehicle Engineering and Autonomous Systems Vehicle Dynamics group CHALMERS UNIVERSITY OF TECHNOLOGY Göteborg, Sweden 2017 Modelling the Evolution of Tyre Performance in a Motorsport Application Analysis of Effects on Vehicle Performance in a Real-Time Simulation Environment Håkan
    [Show full text]
  • Tech International Tire Repair Catalog
    The World Leader in Tire Repair The World TECH INTERNATIONAL TIRE REPAIR CATALOG www.techtirerepairs.com TRUST TECH Table of Contents TIRE REPAIR PRODUCTS & REPAIR CHARTS Pages 3 – 25 Uni-Seal Ultra Repairs . 3 – 4 Uni-Seal 2-piece Stems & Repairs . 5 – 7 Centech Radial Repairs for Shoulder Injuries . 6 Radial Section Repairs . 8 – 10 Bias Ply Tire Repairs. 11 – 13 Radial OTR Repairs . 14 – 18 Tech Off Road (TOR) Bias Repairs . 19 – 21 Repair Rubber and Chemicals . 22 – 24 2-Way Tube Repairs & All-Purpose Repairs. 25 NAILHOLE INSERTS & REPAIR KITS Pages 26 – 28 Permacure Repairs & Kits . 26 Flow-Seal Inserts & Self-Vulcanizing Repairs . 27 Repair Kits . 28 CABINETS & REPAIR TOOLS Pages 29 – 31, 113 Cabinets & Tool Stations. 29 Hand Tools and Knives, Extruder Guns & Branding Irons . 30 – 31 Regroovers, Blades & Accessories. 113 PRODUCT PAGES Pages 32 – 33 Tire Inspection & Marking Tools . 32 – 33 Anti-Seize Compound. 33 SAFETY, PROTECTION & HAND CLEANING PRODUCTS Page 34 AIR TOOLS & ACCESSORIES Pages 35 – 41 Drills, Buffers & Air Hammers . 35 Cutters, Burrs, Grinding Stones, Wheels & Rasps . 36 – 39, 41 Wire Brushes, Buffing Stones. 40 Gouges & Cut-Off Wheels . 41 MONAFLEX VULCANIZING EQUIPMENT & SPOTTERS Pages 42 – 47 TIRE & WHEEL SERVICE LUBRICANTS Pages 48 – 49 TIRE IDENTIFICATION Page 50 Radio Frequency Identification Data Tags (RFID) . 50 Tire Identification Logos . 50 TIRE SPREADERS Page 51 Tech International Tire Repair Catalog TIRE BALANCING & SEALANT PRODUCTS Pages 52 – 53 Balance Pads, Tools & Chemicals . 52 Balancing Compound & Tire Sealant . 53 TPMS SOLUTIONS Pages 54 – 57 VALVES & VALVE HARDWARE Pages 58 – 73 AIR SERVICE PRODUCTS Pages 74 – 78 Gauges . 74 Automatic Tire Inflators.
    [Show full text]
  • Energy Laboratory Massachusetts Institute of Technology Cambridge
    Energy Laboratory Massachusetts Institute of Technology Cambridge, Massachusetts 02139 THE U.S. GOVERNMENT SYNTHETIC RUBBER PROGRAM 1941-1955 An Examination in Search of Lessons For Current Energy Technology Commercialization Projects by Paul R. Samuelson Working Paper MIT-EL 76-027WP November, 1976 PREPARED FOR THE UNITED STATES ENERGY RESEARCH AND DEVELOPMENT ADMINISTRATION Under Contract No. E(49-18) 2295 Task Order 6 "This report was prepared as an account of work sponsored by the United States government. Neither the United States nor the United States ERDA, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product or process disclosed, or represents that its use would not infringe privately owned rights." i PREFACE This paper was written as a background paper in support of the M.I.T. Energy Policy Study Group's report, "Government Support for the Commerciali- zation of New Energy Technologies; An Analysis and Exploration of the Issues" (M.I.T. Energy Laboratory Report MIT-EL 76-009, October, 1976). Like the other background papers, it examines a specific government program, historical or current, to draw lessons for present energy policies. ii TABLE OF CONTENTS PREFACE . * . i ii TABLE OF CONTENTS .................... * . ii 1. THE ESSENTIAL FACTS ABOUT THE SYNTHETIC RUBBER PROGRAM * . 3 2. GOAL FORMULATION . * . 9 3. IMPLEMENTATION ................... 12 4. FINANCING SCHEMES AND COST ACCOUNTING PROCEDURES . 16 5. INCENTIVE SCHEMES TO ENCOURAGE OPERATING EFFICIENCY AND SALE OF PLANTS ................. 18 6.
    [Show full text]
  • New Joint Sealants. Criteria, Design and Materials
    DOCUMENT RESUME EF 002 627 ED 028 602 New Joint Sealants. Criteria,Design and Materials. Budding kesearch Inst., inc.,Washington. D.C. Report No- BR I PUB -1006 Pub Date 62 Note-252p.; Report of a program held as partof the BRI SpringConference, 1962 Institute,1725 De SalesStreet, N. Available from-ExecutiveVice-President,Building Research Washington, D. C. (S12.00). EDRS Price MF-S1.00 HC-S12.70 Construction (Process),Criteria. Design. Descriptors -*Adhesives, ArchitecturalElements, *Building Materials, Glass, *Glossaries, *Sealers,*Specifications (2) sealing glassand metal joints, Contents include--(1) sealingconcrete joints, (4) a theory of (3) metal and glass jointsealants from afabricator's viewpoint, (5) geometry ofsimple joint sealsunder strain, (6) joint adhesion for joint sealants, sealant requirements sealant specificationsfrom a manufacturer'sviewpoint, (7) joint (8) causes of jointsealant failures, (9)polysulfide joint from an applicator's viewpoint, (12) sealants, (10) silicone jointsealants, (11) pdlyethylenesealing compounds, compounds, and(14) epoxy joint polyurethane joint sealants,(13) butyl sealing of terms for sealants. A review ofspecifications for sealants,and a glossary adhesives, cdatings, andsealants are also included.(RH) 1. 5.02, '-w7"N7,,'Invw;1,741r4577-17,7f7.715,71T17777-0,,,,zwr,!,vp , ^ sre. 0', WI' AA,. 41, U 2. 8 6 Crr imareoresibb .140,P4CWHIMAIMMILINOOMMIA Building Research Institute Board of Directors 1962-63 OFFICERS President and Chairman of Executive Committee LEON CHATELAIN, JR. FAIA Chatelain, Gauger & Nolan Vice President and Vice Chairman of Executive Committee OTTO L. NELSON, JR; Vice President for Housing New York Life Insurance Company Vice President Secretary Treasurer PETER B. GORDON MILTON C. COON, JR. GRAYSON GILL Vice President Executive Vice President President Wolff and Munier, Inc.
    [Show full text]
  • Appendix RUBBER INFORMATION RESOURCES
    Appendix RUBBER INFORMATION RESOURCES RUTH MURRAY Rubber Division ACS Library The University of Akron Akron, Ohio The body of rubber literature continues to increase as new materials enter the picture and as old and new ones find new applications. It is difficult for the expert in the field to keep track of its many developments, while to one not so skilled in the art as the engineer or designer, the rubber literature can be ob­ scure. The references listed below are intended only to highlight the major sources of information. Books review the known and basic information; handbooks, dictionaries and directories point out the specific facts and data; periodicals keep one up-to-date on the relatively late information. The newest information is usually found in conference proceedings. Forming a little classification of their own are the books which cannot be included in the technical listing per se but which will appeal to the reader in­ terested in the history of the rubber industry and of rubber technology. GENERAL BOOKS K. W. Allen, ed., Adhesion 1-9, Applied Science Publishers, London, 1977-1985. The books contain papers that were given at the Annual Conferences on Adhesion and Adhesives at the City University in London. G. Alliger and I. J. Sjothun, Vulcanization of Elastomers, Reinhold, New York, 1964. A series of lectures presented by the Akron Rubber Group, edited and published in book fonn. J. C. Arthur, Jr., ed., Polymers for Fibers and Elastomers, American Chemical Society, Washington, DC 20036, 1984. 615 616 RUBBER TECHNOLOGY A state-of-the-art volume in fiber technology, based on a symposium sponsored by the Macromolecular Secretariat at the 186th Meeting of the ACS, 1983.
    [Show full text]
  • United States Patent Office
    3,514,423 United States Patent Office Patented May 26, 1970 2 cold rubbery SBR-type copolymer having a low Mooney 3,514,423 viscosity of 30 to 100 with 50 to 150 parts of such tacki TREAD END CEMENT FOR SYNTHETEC fying resinous materials as rosin, hydrogenated rosin or TRE TREADS esters of rosinous materials, 10 to 150 parts by weight Emmett B. Reinbold, Cuyahoga Falls, Ohio, assignar to The General Tire & Rubber Company, a corporation 5 of a plasticizer such as white mineral oil, 1 to 300 parts of Ohio by weight of a filler such as clay or SRF (Semi Reinforc No Drawing. Continuation-in-part of application Ser. No. ing Furnace) carbon black, together with 4 parts by 412,225, Nov. 18, 1964. This application May 3, 1968, weight of total curing agents. Before use, the resulting Ser. No. 726,596 composition is pre-cured at temperatures of 200 to 250 int. C. B29h 17/02; C08d 11/02 O F. in the present of added solvents, or at temperatures U.S. C. 260-33.6 1 Claim of about 300 F. in the absence of added solvents. The adhesive just described is not practical as a tread cement for oil-extended cold SBR-type rubber because the ABSTRACT OF THE DISCLOSURE Mooney viscosity of the SBR-copolymer in the adhesive A cement useful with synthetic treads comprises 100 5 is unduly low, the resinous tackifying materials are not parts by weight of a rubbery polymer composed primar at all suitable, and the types of fillers are not appro ily of SBR having a computed Mooney viscosity of be priate.
    [Show full text]
  • The Beckman Center for the History of Chemistry Paul S
    THE BECKMAN CENTER FOR THE HISTORY OF CHEMISTRY PAUL S. GREER Transcript of an Interview Conducted by Peter J. T. Morris in Chapel Hill, North Carolina on 13 November 1985 (With Subsequent Additions and Corrections) Upon Paul S. Greer’s death in 2006, this oral history was designated Free Access. One may view, quote from, cite, or reproduce the oral history with the permission of CHF. Please note: Users citing this interview for purposes of publication are obliged under the terms of the Chemical Heritage Foundation (CHF) Oral History Program to notify CHF of publication and credit CHF using the format below: Paul S. Greer, interview by Peter J. T. Morris at Chapel Hill, North Carolina, 13 November 1985 (Philadelphia: Chemical Heritage Foundation, Oral History Transcript # 0021). Chemical Heritage Foundation Oral History Program 315 Chestnut Street Philadelphia, Pennsylvania 19106 The Chemical Heritage Foundation (CHF) serves the community of the chemical and molecular sciences, and the wider public, by treasuring the past, educating the present, and inspiring the future. CHF maintains a world-class collection of materials that document the history and heritage of the chemical and molecular sciences, technologies, and industries; encourages research in CHF collections; and carries out a program of outreach and interpretation in order to advance an understanding of the role of the chemical and molecular sciences, technologies, and industries in shaping society. PAUL S. GREER 1904 Born in Braddock, Pennsylvania on 28 November Education 1925
    [Show full text]
  • The State of Food and Agriculture, 1964
    ot toe released by the press before 10:00 GMT THE STATE OF FOOD AND AGRICULTURE 1964 CL 43/4 HE STA E 00 AD AGM CULrfURE 14 FOOD AND AGRICULTURE ORGANIZATION OF THE UNITED NATIONS ROME 1964 The statistical material in this publication has been prepared frOM the information available to FAO up to 15 July 1964. The designations employed and the presenta- tion of the material in this publication do not imply the expression of any opinion whatsoever On the part of the Secretariat of the Food and Agriculture Organization of the United Nations concerning the legal status of any country or territory or of its authorities, or concerning the delimination of its frontiers. C) FAO 1964 Printed in Italy CONTENTS Foreword 1 L Summary 3 II. World review and outlook 15 AGRICULTURAL PRODUCTION 15 Production and population 15 Production for export and domestic consumption 17 Regional agricultural production 21 Main agricultural commodities 24 Fishery production 25 Forestry production 26 Agricultural production outlook for 1964/65 28 CHANGES IN STOCKS 29 ECONOMIC ACTIVITY AND THE DEMAND FOR AGRICULTURAL PRODUCTS 32 FOOD SUPPLIES AND CONSUMPTION 33 INTERNATIONAL TRADE IN AGRICULTURAL PRODUCTS 36 Main developments in 1963 36 Price_ trends 39 AgricUitinaT trade of the U.S.S.R., eastern Europe and Mainland China 43 Earnings from agricultural exports 45 Agricultural trade policies in developing countries 48 Agricultural trade policies in industrialized countries 55 Agricultural trade policies in centrally planned countries 58 International commodity agreements and consultations 59 United Nations Conference on Trade and Development 61 FARM PRICES AND INCOMES 66 Farm incomes 68 CONSUMER PRICES 70 AGRICULTURAL POLICIES AND DEVELOPMENT PLANS 72 North America 75 Western Europe 76 Eastern Europe and the U.S.S.R.
    [Show full text]