What Is OGG Format?

Total Page：16

File Type：pdf, Size：1020Kb

What is OGG Format? Ogg is a free, open container format maintained by the Xiph.Org Foundation. The creators of the Ogg format state that it is unrestricted by software patents and is designed to provide for efficient streaming and manipulation of high quality digital multimedia. Why are we using it? Because of the different loop segments we provide in our packages, we need to use an audio file format that is completely gapless. MP3 files actually have a very very small amount of silence at the beginning and end of the song / track / file. When you try to loop an MP3 file version of one of the loops in our packages, there will be a slight stutter when the track ends and the loop (new track) starts. The OGG audio file format comes out to roughly the same file size as the MP3 counter part, and better yet – there's no tiny (annoying) gap of silence at the start or end of any of the files. This allows us to provide you (the consumer) with an awesome arsenal of audio files that truly are able to be looped, chopped, and customized to fit your project(s). Furthermore, the OGG file format is widely accepted and used among many different video and audio editing software platforms. This means that you don't have to do any searching for software that allows you to use the awesome OGG audio file format. How To Play These Files (Codecs) You may be wondering how you can play these OGG files for previewing or any other form of listening. All you really need to do is install the necessary codec (if you don't already have it installed): For running on Windows: http://www.vorbis.com/setup_windows/ For running on Mac OS: http://www.vorbis.com/setup_osx/ For running on Linux / UNIX: http://www.vorbis.com/setup_linux/ Other platforms: http://www.vorbis.com/setup_other/ As mentioned previously, you should be able to use the OGG files in your preferred video editing or audio editing software without any issue. Other Resources OGG Vorbis Home Page: http://www.vorbis.com/ OGG Vorbis Wikipedia Page: https://en.wikipedia.org/wiki/Ogg OGG Vorbis FAQ: http://www.vorbis.com/faq/.

Copy Link

Recommended publications

(A/V Codecs) REDCODE RAW (.R3D) ARRIRAW
What is a Codec? Codec is a portmanteau of either "Compressor-Decompressor" or "Coder-Decoder," which describes a device or program capable of performing transformations on a data stream or signal. Codecs encode a stream or signal for transmission, storage or encryption and decode it for viewing or editing. Codecs are often used in videoconferencing and streaming media solutions. A video codec converts analog video signals from a video camera into digital signals for transmission. It then converts the digital signals back to analog for display. An audio codec converts analog audio signals from a microphone into digital signals for transmission. It then converts the digital signals back to analog for playing. The raw encoded form of audio and video data is often called essence, to distinguish it from the metadata information that together make up the information content of the stream and any "wrapper" data that is then added to aid access to or improve the robustness of the stream. Most codecs are lossy, in order to get a reasonably small file size. There are lossless codecs as well, but for most purposes the almost imperceptible increase in quality is not worth the considerable increase in data size. The main exception is if the data will undergo more processing in the future, in which case the repeated lossy encoding would damage the eventual quality too much. Many multimedia data streams need to contain both audio and video data, and often some form of metadata that permits synchronization of the audio and video. Each of these three streams may be handled by different programs, processes, or hardware; but for the multimedia data stream to be useful in stored or transmitted form, they must be encapsulated together in a container format.
[Show full text]
Codec Is a Portmanteau of Either
What is a Codec? Codec is a portmanteau of either "Compressor-Decompressor" or "Coder-Decoder," which describes a device or program capable of performing transformations on a data stream or signal. Codecs encode a stream or signal for transmission, storage or encryption and decode it for viewing or editing. Codecs are often used in videoconferencing and streaming media solutions. A video codec converts analog video signals from a video camera into digital signals for transmission. It then converts the digital signals back to analog for display. An audio codec converts analog audio signals from a microphone into digital signals for transmission. It then converts the digital signals back to analog for playing. The raw encoded form of audio and video data is often called essence, to distinguish it from the metadata information that together make up the information content of the stream and any "wrapper" data that is then added to aid access to or improve the robustness of the stream. Most codecs are lossy, in order to get a reasonably small file size. There are lossless codecs as well, but for most purposes the almost imperceptible increase in quality is not worth the considerable increase in data size. The main exception is if the data will undergo more processing in the future, in which case the repeated lossy encoding would damage the eventual quality too much. Many multimedia data streams need to contain both audio and video data, and often some form of metadata that permits synchronization of the audio and video. Each of these three streams may be handled by different programs, processes, or hardware; but for the multimedia data stream to be useful in stored or transmitted form, they must be encapsulated together in a container format.
[Show full text]
FACTFILE: GCSE DIGITAL TECHNOLOGY Unit 1 – DIGITAL DATA
FACTFILE: GCSE DIGITAL TECHNOLOGY Unit 1 – DIGITAL DATA Fact File 4: Portability Learning Outcomes Students should be able to: • demonstrate understanding of data portability and the following file formats that support it: jpeg, tiff, png, pict, gif, txt, csv, rtf, mp3, mp4, midi, mpeg, avi, pdf, wav and wma. • demonstrate understanding of the need for data compression. The Need For Data Compression Compression means reducing the storage requirements of a file by following one or more compression algorithms. LOSSLESS compression enables the original file to be fully restored to its original state. LOSSY compression involves discarding some data as part of the overall compression process in such a way that the data can never be reinstated. Files that demand high volumes of storage also require high bandwidth communication links in order for transmission to be completed within an acceptable time frame. Compression is used to reduce the: • VOLUME of storage required on storage DEVICES, enabling larger quantities of data to fit into the same amount of storage space • BANDWIDTH required to transfer multimedia files across COMMUNICATION LINKS (locally, nationally and globally) Without compression: • Very high VOLUMES of storage would be required, occupying more physical space and slowing down retrieval/save times • The available BANDWIDTH on most local and global networks would not cope with the volumes of data being sent, disrupting communication services (leading to e.g. lagging video streaming) Of course, there will be a price to pay for the benefits of compression, i.e. time will have to be set aside to compress and decompress the files as they are moved in and out of storage or across communication links.
[Show full text]
Audio File Types for Preservation and Access
AUDIO FILE TYPES FOR PRESERVATION AND ACCESS INTRODUCTION This resource guide identifies and compares audio file formats commonly used for preservation masters and access copies for both born digital and digitized materials. There are a wide range of audio file formats available, each with their own uses, considerations, and best practices. For more information about technical details see the glossary and additional resources linked at the end of this resource guide. For more information about audio files, view related items connected to this resource on the Sustainable Heritage Network in the “Audio Recordings” category. AUDIO FILE FORMATS FOR PRESERVATION MASTERS Lossless files (either uncompressed, or using lossless compression) are best used for preservation masters as they have the highest audio quality and fidelity, however, they produce the largest file sizes. Preservation Masters are generally not edited, or are minimally edited because their purpose is to serve as the most faithful copy of the original recording possible. WAV (Waveform Audio File Format) ● Uncompressed ● Proprietary (IBM), but very widely used ● Accessible on all operating systems and most audio software ● A variant called BWF (Broadcast Wave File Format) allows embedding of additional metadata sustainableheritagenetwork.org | [email protected] Center for Digital Scholarship and Curation | cdsc.libraries.wsu.edu Resource updated 3/14/2018 FLAC (Free Lossless Audio Codec) ● Compressed (lossless) ● Open format ● Accessible on all operating
[Show full text]
Creating Content for Ipod + Itunes
Apple Education Creating Content for iPod + iTunes This guide provides information about the file formats you can use when creating content compatible with iTunes and iPod. This guide also covers using and editing metadata. To prepare for creating content, you should know a few basics about file formats and metadata. Knowing about file formats will guide you in choosing the correct format for your material based on your needs and the content. Knowing how to use metadata will help you provide your audience with information about your content. In addition, metadata makes browsing and searching easier. This guide also includes recommended tools for creating content. Understanding File Formats To create and distribute materials for playback on iPod and in iTunes, you need to get the materials (primarily audio or video) into compatible file formats. Understanding file formats and how they compare with each other will help you decide the best way to prepare your materials. Apple recommends using the following file formats for iPod and iTunes content: • AAC (Advanced Audio Coding) for audio content AAC is a state-of-the-art, open (not proprietary) format. It is the audio format of choice for Internet, wireless, and digital broadcast arenas. AAC provides audio encoding that compresses much more efficiently than older formats, yet delivers quality rivaling that of uncompressed CD audio. • H.264 for video content H.264 uses the latest innovations in video compression technology to provide incredible video quality from the smallest amount of video data. This means you see crisp, clear video in much smaller files, saving you bandwidth and storage costs over previous generations of video codecs.
[Show full text]
Encoding Data
Encoding data Encoding is the process of converting data from one form to another. While "encoding" can be used as a verb, it is often used as a noun, and refers to a specific type of encoded data. There are several types of encoding, including; Image encoding Audio encoding Video encoding, and Character encoding Media files are often encoded to save disk space. By encoding digital audio, video, and image files, they can be saved in a more efficient, compressed format. Encoded media files are typically similar in quality to their original uncompressed counterparts, but have much smaller file sizes. For example, a WAVE (.WAV) audio file that is converted to an MP3 (.MP3) file may be 1/10 the size of the original WAVE file. Similarly, an MPEG (.MPG) compressed video file may only require a fraction of the disk space as the original digital video (.DV) file. Character encoding is another type of encoding that encodes characters as bytes. Since computers only recognize binary data, text must be represented in a binary form. This is accomplished by converting each character (which includes letters, numbers, symbols, and spaces) into a binary code. Common types of text encoding include ASCII and Unicode. Whenever data is encoded, it can only be read by a program that supports the correct type of encoding. For audio and video files, this is often accomplished by a codec, which decodes the data in real- time. Codec The name "codec" is short for "coder-decoder", which is pretty much what a codec does. Most audio and video formats use some sort of compression so that they don't take up a ridiculous amount of disk space.
[Show full text]
Computer Audio Demystified 2.0 December 2012
Computer Audio Demystified 2.0 December 2012 What is Computer Audio? From iTunes®, streaming music and podcasts to watching YouTube videos, TV shows or movies, today’s computers are the hub that connects people to a vast universe of digital entertainment content. Computer audio playback can be as simple as playing those files or streams on a portable media player like an iPod®, iPad®, or a smart phone device such as the iPhone® or an Android™ phone. Or it can be as sophisticated as a component-based home entertainment system using a high-end Digital-Audio Converter (aka DAC). In this brave new frontier of computer-based digital audio, the current reality is that a lossless 16-bit/44.1kHz digital music file can sound far better than the CD it was ripped from when each is played in real time, and a high-resolution 24-bit/88.2kHz digital music file can truly compete with vinyl’s sonic beauty without our beloved vinyl’s flaws. Notice there is a bunch of “cans” in the line above. Great audio is possible in this new computer audio world, but it is not automatic. Just as adjusting the stylus rake angle properly is critical to getting the best performance from a turntable, knowledge is required to optimize the hardware and software that will define the performance boundaries of your computer audio experience. AudioQuest’s Computer Audio Demystified is a guide created to dispel some of the myths about computer audio and establish some “best practices” in streaming, acquiring and managing digital music.
[Show full text]
Guide to Audio Recording Formats
Using Digital Learning Technologies in Junior Cycle Music Guide to Audio Recording Formats What is an audio recording format? An audio format is a file format which stores music on your computer. This document provides a brief explanation of some of the main format types. Compressed Uncompressed Audio formats belong to either or formats, depending on how they store the data. Where possible when recording, record in 44,100Khz and 16 bit (minimum) for studio grade recording. Compressed Audio Formats Uncompressed Audio Formats … compress the digital audio quality to produce a smaller file which …are bulky files and take up a lot of takes up less space on your storage drive. space on your storage drive. There are two types of compressed audio formats: The advantage of this format is that the Lossless Compressed Audio Format: no loss of data during digital audio is unchanged, so the compression process. quality remains intact no matter how Lossy Compressed Audio Formats: Will reduce audio quality by many times you process it. eliminat ing certain information and frequencies to reduce file size. Commonly used audio formats include the following: AAC The Advanced Audio Coding (AAC) format stores lossy compressed audio. It is an alternative to mp3 as it offers better quality than mp3 at lower size files. AIFF The Audio Interchange File Format (AIFF) is an uncompressed audio format. Commonly used for professional audio application. ALAC The Apple Lossless Audio Codec (ALAC) format used on iTunes and iOS has no loss in quality when compressing data. FLAC Free Lossless Audio Codec (FLAC) is an audio format similar to mp3, but lossless, meaning that there is no loss in quality when compressed.
[Show full text]
Windows Media Audio
The Customize Windows Technology Blog http://thecustomizewindows.com Windows Media Audio Author : Abhishek Windows Media Audio (WMA) is an audio data compression technology developed by Microsoft. The name can be used to refer to its audio file format or its audio codecs. It is a proprietary technology that forms part of the Windows Media framework. WMA consists of four distinct codecs. The original WMA codec, known simply as WMA, was conceived as a competitor to the popular MP3 and RealAudio codecs. WMA Pro, a newer and more advanced codec, supports multichannel and high resolution audio. A lossless codec, WMA Lossless, compresses audio data without loss of audio fidelity. WMA Voice, targeted at voice content, applies compression using a range of low bit rates. Container Format A WMA file is in most circumstances encapsulated, or contained, in the Advanced Systems Format (ASF) container format, featuring a single audio track in one of following codecs: WMA, WMA Pro, WMA Lossless, or WMA Voice. These codecs are technically distinct and mutually 1 / 3 The Customize Windows Technology Blog http://thecustomizewindows.com incompatible. The ASF container format specifies how metadata about the file is to be encoded, similar to the ID3 tags used by MP3 files. Metadata may include song name, track number, artist name, and also audio normalization values. This container can optionally support digital rights management (DRM) using a combination of elliptic curve cryptography key exchange, DES block cipher, a custom block cipher, RC4 stream cipher and the SHA-1 hashing function. See Windows Media DRM for further information. Windows Media Audio 9 This codec samples audio at 44.1 or 48 kilohertz (kHz) using 16 bits, similar to the current CD standard, offering CD quality at data rates from 64 to 192 kilobits per second (Kbps).
[Show full text]
Audio File Types
Audio File Types .wma the popular Windows Media Audio format owned by Microsoft. .aif the standard audio file format used by Apple. It is like a wav file for the Mac MPEG Layer-3 files - the most popular format for downloading and storing music. By eliminating .mp3 portions of the audio file that are essentially inaudible, these files are compressed to roughly one- tenth the size of an equivalent PCM file while maintaining good audio quality. a free, open source container format supporting a variety of codecs, the most popular of which is .ogg the audio codec Vorbis. Vorbis files are often compared to MP3 files in terms of quality. But the simple fact mp3 are so much more broadly supported makes it difficult to recommend these files. The name comes from the gaming term ‘ogging’ in Netrek. Wave file - standard audio file format used mainly in Windows PCs. Commonly used for storing .wav uncompressed (PCM), CD-quality sound files, which means that they can be large in size - around 10MB per minute of music. File Compression and Formats File compression is a good way to make the most of the memory storage you have available. It makes the file size a lot smaller and much easier to move around and save. There are a multitude of different file formats available, some used for different types of files, some developed by companies to encourage people to use their specific product. For reference: bitrate refers to the quality of format. It is the amount of data that is used per second of your media.
[Show full text]
Audio File Type Guide Digital Stewardship Curriculum Uncompressed Lossless
Audio File Type Guide Digital Stewardship Curriculum There are three types of audio quality: uncompressed, lossless, and lossy. Uncompressed audio keeps all the quality of the original source intact, lossless compresses audio for less space while maintaining quality, and lossy audio compresses the files more for saving space at a slightly reduced quality. To keep it simple, we recommend using WAV file format (uncompressed) for your archival master copy, and MP3 (lossy) as your access copy. However, here are explanations of these and several other audio formats in a bit more detail. Uncompressed ● WAV: An uncompressed format, which means it is an exact copies of the original source audio. The standard audio file format used mainly in Windows PCs. Commonly used for storing uncompressed (PCM), CD-quality sound files, which means that they can be large in size - around 10MB per minute of music. ● AIFF: AIFF is made by Apple, so you may see it a bit more often in Apple products. Also uncompressed, this format is like WAV, but a little less widely used. Since both these formats are uncompressed, they take up a lot of space. Lossless ● FLAC: The Free Lossless Audio Codec (FLAC) is the most popular lossless format, making it a good choice if you want to store your music in lossless. Unlike WAV and AIFF, it's been compressed, so it takes up a lot less space. However, it's still a lossless format, which means the audio quality is still the same as the original source, so it's much better for listening than WAV and AIFF.
[Show full text]
Perceptual Model for Assessment of Coded Audio
Perceptual model for assessment of coded audio David J M Robinson A thesis submitted for the degree of Doctor of Philosophy Department of Electronic Systems Engineering University of Essex March 2002 Summary In this thesis, a time-domain binaural auditory model is developed for the assessment of high quality coded audio signals. Traditional objective measurements of sound quality yield misleading results when applied to psychoacoustic based codecs. Whilst human subjective opinion must be the ultimate arbiter of perceived sound quality, an objective measurement is sought that accurately predicts human perception. The auditory model described in this thesis is designed to match the processing within the human auditory system as closely as possible. The outer and middle ear transforms are simu- lated by linear filters; the basilar membrane response is simulated by a bank of amplitude dependent gammachirp filters, and the compressive action of the inner hair cells is simulated by an adaptation circuit. The whole model is calibrated using known human performance data. This monophonic model is used as the basis for a model of binaural hearing. Signals from the inner hair cell simulation are compared with those from the opposing ear, and an internal binaural image is formed. Changes in this image are shown to reflect audible changes in the binaural properties of the sound field. The binaural model predicts binaural masking and lo- calisation data using a single detection criterion, which suggests that both phenomena may be due to the same internal process. Finally, the model is used for audio quality assessment. The monophonic model correctly predicts human perception for some coded audio extracts, but not all.
[Show full text]