Glastender Bar Refrigeration Catalog
Total Page:16
File Type:pdf, Size:1020Kb
Expect more more flexibility Bar Refrigeration more features Your one - stop bar refrigeration shop The special stainless steel top on the margarita machine stand has a 1" high drip-proof edge on the back and sides with radius corners for easy cleaning. The cabinet base provides additional dry storage. Lighted liquor displays designed for use with glass ice display units have a front light channel Matching dry storage cabinets to illuminate the ice bath (field installed glass ice offer attractive and convenient display unit shown). storage for dry goods. Available without finished top for integrated installation below customer supplied bar top (as shown below). Back bar coolers are available with up to four doors Back bar liquor display includes interior and as self-contained or remote refrigerated (two-door light to enhance product merchandising. self-contained model shown). The stainless steel steps have ABS plastic sound deadening covers and radius corners Reach-in mug frosters make it easier to frost diverse glassware and for easy cleaning. rotate glass inventory while matching the look of back bar coolers. Back bar glass storage unit provides extra glass storage while maintaining the back bar profile. Adjustable shelves Back bar coolers can be easily converted to draft beer dispensing. have radius corners for easy cleaning. Glastender, Inc. • 5400 North Michigan • Saginaw, MI • 48604-9780 • 989.752.4275 • 800.748.0423 • Fax 989.752.4444 • www.glastender.com Glastender, Inc. • 5400 North Michigan • Saginaw, MI • 48604-9780 • 989.752.4275 • 800.748.0423 • Fax 989.752.4444 • www.glastender.com Unrivaled cooler features Edge cap on laminated doors and Innovative end wall refrigeration compressor compartment covers design with evaporator located protects laminate from chipping. above compressor compartment frees up interior space for Available without a finished top 1 2 3 4 5 6 7 1 2 3 maximum storage capacity. for integrated installation below customer supplied bar top Glastender top shelf cross section Top shelf cross section of (factory installed top shown). typical industry design Recessed compressor Convenient full access to all three shelves compartment back and 90° to maximize efficiency - leading competitor electrical plug enables flush design has obstructed access to top shelf. wall placement. Glastender design Competitor design Easy to remove condenser filter can be regularly cleaned to maintain condenser coil efficiency. All stainless steel interior with radius corners is easy to keep clean and Optional leg sets employ a unique recessed meets NSF Standard 7 for open food containers on BB and ND models. cup design to enhance durability. NOTE: Raised panel wood doors do not meet UL flammability test requirements. Coolers manufactured with raised panel wood doors do NOT carry the UL mark. Please verify acceptability with your local electrical inspector prior to ordering. Nine door styles to satisfy diverse needs and decor (unlaminated not shown) Wood solid and glass Laminated solid and glass ABS plastic threshold scuff Black vinyl-clad solid and glass plate protects lower door sill. 16 gauge galvanized steel interlocking multi-bend base provides incredible strength and rigidity. Stainless steel solid and glass Glastender, Inc. • 5400 North Michigan • Saginaw, MI • 48604-9780 • 989.752.4275 • 800.748.0423 • Fax 989.752.4444 • www.glastender.com Glastender, Inc. • 5400 North Michigan • Saginaw, MI • 48604-9780 • 989.752.4275 • 800.748.0423 • Fax 989.752.4444 • www.glastender.com Two Zone Coolers Lighted Liquor Displays Two Zone Coolers allow you to store products at two different temperatures, Glastender lighted liquor displays are a great way to highlight saving money by getting one cooler to do the job of two. Back bar and and merchandise your call brand liquor. Available in two or three narrow door two zone coolers are available with 2, 3, or 4 doors and in three step versions and in 6" incremental lengths from 24" up to 108". configurable options: beer and white wine, beer and red wine, white wine Conforms to ANSI/UL STD 962 and red wine. The warmer compartment is always a single door located Certified to CSA STD C22.2 No. 12 opposite the compressor end. Access hole provides access to on/off switch. Removable step cover for easy access to fluorescent light bulbs. Durable black vinyl-clad exterior (stainless steel available by Door opening allows special order). LLDS-30R convenient full access to all three BB60BW-LI-XS (LR) rows of long neck beer bottles or two rows of wine bottles. Power cord and on/off switch can be located One-piece clear acrylic on the left or right end End wall refrigeration design with evaporator located cover is easy to clean to meet your installation above compressor compartment frees up interior and protects internal requirements. space for maximum storage capacity. components from spills. Units are certified to meet ANSI/UL 962 spill Dual blower motors provide test requirements. the air flow necessary to ensure Insulated wall between compartments consistent temperature within provides a thermal break to ensure the warmer compartment. End views consistent temperature control. Lighted liquor The LLD models displays have 4" are designed for use high by 4" deep in conjunction with steps, except for Glastender glass ice Clearly visible digital thermostats the LLD models display units. The independently control temperature which have LLD models have within each compartment. a 9-1/4" high a front light channel first step. to help illuminate All stainless steel interior with the ice display. radius corners for easy cleaning. LLDS LLD3 LLD Glastender, Inc. • 5400 North Michigan • Saginaw, MI • 48604-9780 • 989.752.4275 • 800.748.0423 • Fax 989.752.4444 • www.glastender.com Glastender, Inc. • 5400 North Michigan • Saginaw, MI • 48604-9780 • 989.752.4275 • 800.748.0423 • Fax 989.752.4444 • www.glastender.com Ice Display and Glass Ice Display Units Ice display units are a great way to merchandise beverages as well as add The GDU model glass ice display units have glass front and back panels for chilled storage capacity to your bar. They are available factory installed on increased product visibility. The four walls of the GDU sit inside an insulated Glastender back bar cabinets or for field installation. The 7" high stainless stainless steel pan that captures the moisture from melting ice on the inside steel IDU models have a 6" deep liner and are available in 12", 18", or 24" and any condensation on the outside. GDU models are available in 12", 16", depths and in 6" incremental sizes from 24" up to 108" in length. 18", and 24" depths and in 6" incremental sizes from 24" up to 108" in length. GDU-12X36 Double pane glass front and back panels with stainless steel trim for increased product visibility. IDU-18X30 Field installed units include a stainless steel foamed-in-place insulated drain pan to mount Stainless steel to existing counter top. foamed-in-place A stainless insulated end panels steel perforated (units larger than 54" The four walls easily lift out of the bottom insert include center partition). pan for thorough cleaning. Available by helps prevent special order with bottle labels durable black from clogging vinyl-clad exterior. the drain. Foam-in-place insulation and ABS plastic breaker strip around ice bin liner unit acts as a thermal barrier to minimize condensation and maximize ice life. A stainless steel perforated bottom insert Factory installed units include a special stainless helps prevent bottle labels from clogging 1/4" radius interior corners steel foamed-in-place insulated cooler top with the drain. for easy cleaning. seamless-welded drain pan. Glastender, Inc. • 5400 North Michigan • Saginaw, MI • 48604-9780 • 989.752.4275 • 800.748.0423 • Fax 989.752.4444 • www.glastender.com Glastender, Inc. • 5400 North Michigan • Saginaw, MI • 48604-9780 • 989.752.4275 • 800.748.0423 • Fax 989.752.4444 • www.glastender.com Keg Coolers Manufactured with the same quality Most industry beer faucets are brass or chrome plated brass. construction as our standard back bar As the chromium layer breaks down, the beer flowing coolers, Glastender keg coolers are over the exposed brass allows copper and lead to leach into specifically intended for keg dispensing the beer which affects the flavor. Glastender beer towers avoid this by having stainless steel faucets and shanks and come standard with the features (shown cut-away) that resist corrosion and metallic leaching. detailed here. [Note: faucet handles not included.] Surface mount drain pan includes seamless-integrated rear deck with drip edge to divert splashes around the beer tower column into the drain pan. Features specific to the KC24 Pre-plumbed drain line exits below compressor compartment for convenient A 24" wide keg plumbing to nearest floor drain. cooler is available for use in the underbar environment where side ventilation is available. The column tower is available with up to three faucets, since the unit can hold up to three 1/6th KC24-NI-BS2(R) style micro brew kegs.* Seamless-welded recessed drainer for easy cleaning. KC60-LI-BS (LR) Available in sizes to dispense up to four full-size kegs. Hose from evaporator provides forced-air cooling of beer tower Galvanized steel to minimize foaming issues. interior walls and ceiling with stainless steel floor to prevent rusting where Includes stainless steel keg rack Pre-plumbed drain line to Hose from evaporator provides CO2 cylinder retention chain moisture collects. (shown cut away) and ABS plastic internal drain bottle forced-air cooling of beer tower (knockout provided for optional threshold scuff plate to absorb keg (side knockout provided for to minimize foaming issues. external CO2 connection). Radius interior corners impact and prevent damage to floor optional external draining). for easy cleaning. of unit. * NOTE: 1/6 barrel keg availability varies by region.