DOCSLIB.ORG

Audio Plug-Ins Guide Version 8.0.4 Legal Notices This Guide Is Copyrighted ©2010 by Avid Technology, Inc., (Hereafter “Avid”), with All Rights Reserved

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Audio Plug-Ins Guide Version 8.0.4 Legal Notices This Guide Is Copyrighted ©2010 by Avid Technology, Inc., (Hereafter “Avid”), with All Rights Reserved Audio Plug-Ins Guide Version 8.0.4 Legal Notices This guide is copyrighted ©2010 by Avid Technology, Inc., (hereafter “Avid”), with all rights reserved. Under copyright laws, this guide may not be duplicated in whole or in part without the written consent of Avid. 003, 96 I/O, 96i I/O, 192 Digital I/O, 192 I/O, 888|24 I/O, 882|20 I/O, 1622 I/O, 24-Bit ADAT Bridge I/O, AudioSuite, Avid, Avid DNA, Avid Mojo, Avid Unity, Avid Unity ISIS, Avid Xpress, AVoption, Axiom, Beat Detective, Bomb Factory, Bruno, C|24, Command|8, Control|24, D-Command, D-Control, D-Fi, D-fx, D-Show, D-Verb, DAE, Digi 002, DigiBase, DigiDelivery, Digidesign, Digidesign Audio Engine, Digidesign Intelligent Noise Reduction, Digidesign TDM Bus, DigiDrive, DigiRack, DigiTest, DigiTranslator, DINR, D-Show, DV Toolkit, EditPack, Eleven, HD Core, HD Process, Hybrid, Impact, Interplay, LoFi, M-Audio, MachineControl, Maxim, Mbox, MediaComposer, MIDI I/O, MIX, MultiShell, Nitris, OMF, OMF Interchange, PRE, ProControl, Pro Tools M-Powered, Pro Tools, Pro Tools|HD, Pro Tools LE, QuickPunch, Recti-Fi, Reel Tape, Reso, Reverb One, ReVibe, RTAS, Sibelius, Smack!, SoundReplacer, Sound Designer II, Strike, Structure, SYNC HD, SYNC I/O, Synchronic, TL Aggro, TL AutoPan, TL Drum Rehab, TL Everyphase, TL Fauxlder, TL In Tune, TL MasterMeter, TL Metro, TL Space, TL Utilities, Transfuser, Trillium Lane Labs, Vari-Fi Velvet, X-Form, and XMON are trademarks or registered trademarks of Avid Technology, Inc. Xpand! is Registered in the U.S. Patent and Trademark Office. All other trademarks are the property of their respective owners. Product features, specifications, system requirements, and availability are subject to change without notice. Guide Part Number 9329-62654-00 REV A 06/10 Documentation Feedback At Avid, we are always looking for ways to improve our documentation. If you have comments, corrections, or suggestions regarding our documentation, email us at [email protected]. Contents Part I Introduction Chapter 1. Overview . 3 Parts of This Guide . 3 Plug-In Formats. 3 System Requirements and Compatibility . 4 Legacy and 3rd-Party Plug-Ins . 4 Using Plug-Ins in Pro Tools . 5 Contents of the Boxed Version of Your Plug-In . 5 Conventions Used in This Guide . 5 About www.avid.com . 6 Chapter 2. Installing Plug-Ins . 7 Overview . 7 Installing Plug-Ins for Pro Tools. 8 Installing Plug-Ins for VENUE Systems . 8 Using Pro Tools Plug-Ins with Avid Media Composer . 8 Authorizing Paid Plug-Ins . 9 Removing Plug-Ins for Pro Tools . 10 Removing Plug-Ins for VENUE Systems . 11 Part II DigiRack Plug-Ins Chapter 3. Introduction . 15 Chapter 4. Click . 17 Click Controls . 17 Creating a Click Track . 18 Contents iii Chapter 5. DigiRack D-Fx Plug-Ins . 19 Chorus . 19 Flanger . 20 Multi-Tap Delay . 21 Ping-Pong Delay. 22 Selecting Audio for AudioSuite Delay Processing . 23 Chapter 6. Dither. 25 Dither Controls. 26 Chapter 7. D-Verb . 27 D-Verb Controls . 27 Chapter 8. Dynamics III . 31 Shared Compressor/Limiter and Expander/Gate Features . 31 Compressor/Limiter III . 34 Expander/Gate III . 38 De-Esser III . 40 Using the Side-Chain Input in Dynamics III . 43 Chapter 9. EQ III . 47 EQ III Controls . 48 7Band EQ. 53 2–4 Band EQ . 58 1Band EQ. 59 Chapter 10. Mod Delay II . 63 Mod Delay II Controls . 63 Multichannel Mod Delay II. 65 Selections for ModDelay II AudioSuite Processing . 65 iv Audio Plug-Ins Guide Chapter 11. Other AudioSuite Plug-Ins. 67 DC Offset Removal . 67 Duplicate . 67 Gain. 68 Invert . 68 Normalize. 69 Reverse . 70 Chapter 12. Pitch. 71 Pitch Controls . 71 Chapter 13. Pitch Shift. 75 Chapter 14. POW-r Dither . 77 POW-r Dither Controls . 77 Chapter 15. ReWire. ..
Load more

Recommended publications
  • Moogerfooger® MF-107 Freqbox™
    Understanding and Using your moogerfooger® MF-107 FreqBox™ TABLE OF CONTENTS Introduction.................................................2 Getting Started Right Away!.......................4 Basic Applications......................................6 FreqBox Theory........................................10 FreqBox Functions....................................16 Advanced Applications.............................21 Technical Information...............................24 Limited Warranty......................................25 MF-107 Specifications..............................26 1 Welcome to the world of moogerfooger® Analog Effects Modules. Your Model MF-107 FreqBox™ is a rugged, professional-quality instrument, designed to be equally at home on stage or in the studio. Its great sound comes from the state-of-the- art analog circuitry, designed and built by the folks at Moog Music in Asheville, NC. Your MF-107 FreqBox is a direct descendent of the original modular Moog® synthesizers. It contains several complete modular synth functions: a voltage-controlled oscillator (VCO) with variable waveshape, capable of being hard synced and frequency modulated by the audio input, and an envelope follower which allows the dynamics of the input signal to modulate the frequency of the VCO. In addition the amplitude of the VCO is controlled by the dynamics of the input signal, and the VCO can be mixed with the audio input. All performance parameters are voltage-controllable, which means that you can use expression pedals, MIDI-to-CV converter, or any other source of control voltages to 'play' your MF-107. Control voltage outputs mean that the MF-107 can be used with other moogerfoogers or voltage controlled devices like the Minimoog Voyager® or Little Phatty® synthesizers. While you can use it on the floor as a conventional effects box, your MF-107 FreqBox is much more versatile and its sound quality is higher than the single fixed function "stomp boxes" that you may be accustomed to.
    [Show full text]
  • Pulse Width Modulation
    International Journal of Research in Engineering, Science and Management 38 Volume-2, Issue-12, December-2019 www.ijresm.com | ISSN (Online): 2581-5792 Pulse Width Modulation M. Naganetra1, R. Ramya2, D. Rohini3 1,2,3Student, Dept. of Electronics & Communication Engineering, K. S. Institute of Technology, Bengaluru India Abstract: This paper presents pulse width modulation which can 2. Principle be controlled by duty cycle. Pulse width modulation(PWM) is a Pulse width modulation uses a rectangular pulse wave powerful technique for controlling analog circuits with a digital signal. PWM is widely used in different applications, ranging from whose pulse width is modulated resulting in the variation of the measurement and communications to power control and average value of the waveform. If we consider a pulse signal conversions, which transforms the amplitude bounded input f(t), with period T, low value Y-min, high value Y-max and a signals into the pulse width output signal without suffering noise duty cycle D. Average value of the output signal is given by, quantization. The frequency of output signal is usually constant. By controlling analog circuits digitally, system cost and power 1 푇 푦̅= ∫ 푓(푡)푑푡 consumption can be reduced. The PWM signal is still digital 푇 0 because, at any instant of time, the full DC supply will be either fully_ ON or fully _OFF. Given a sufficient bandwidth, any analog 3. PWM generator signals (sine, square, triangle and so on) can be encoded with PWM. Keywords: decrease-duty, duty cycle, increase-duty, PWM (pulse width modulation), RTL view 1. Introduction Pulse width modulation (or pulse duration modulation) is a method of reducing the average power delivered by an electrical Fig.
    [Show full text]
  • How Can You Replicate Real World Signals? Precisely
    How can you replicate real world signals? Precisely tç)[UP.)[ 7QQ PSDIBOOFMT FG400 Series t*OUVJUJWFPQFSBUJPOXJUIBw Arbitrary/Function Generator LCD screen t4ZODISPOJ[FVQUPVOJUTUP QSPWJEFVQUPPVUQVU DIBOOFMT t"WBSJFUZPGTXFFQTBOE modulations Bulletin FG400-01EN Features and benefits FG400 Series Features and CFOFýUT &BTJMZHFOFSBUFCBTJD BQQMJDBUJPOTQFDJýDBOEBSCJUSBSZXBWFGPSNT 2 The FG400 Arbitrary/Function Generator provides a wide variety of waveforms as standard and generates signals simply and easily. There are one channel (FG410) and two channel (FG420) models. As the output channels are isolated, an FG400 can also be used in the development of floating circuits. (up to 42 V) Basic waveforms Advanced functions 4JOF DC 4XFFQ.PEVMBUJPO Burst 0.01 μHz to 30 MHz ±10 V/open Frequency sweep "VUP Setting items Oscillation and stop are 4RVBSF start/stop frequency, time, mode automatically repeated with the (continuous, single, gated single), respectively specified wave number. function (one-way/shuttle, linear/ log) 0.01 μHz to 15 MHz, variable duty Pulse 18. Trigger Setting items Oscillation with the specified wave carrier duty, peak duty deviation number is done each time a trigger Output duty is received. the range of carrier duty ±peak duty deviation 0.01 μHz to 15 MHz, variable leading/trailing edge time Ramp ". Gate Setting items Oscillation is done in integer cycles carrier amplitude, modulation depth or half cycles while the gate is on. Output amp. the range of amp./2 × (1 ±mod. 0.01 μHz to 5 MHz, variable symmetry Depth/100) 3 For trouble shooting Arbitrary waveforms (16 bits amplitude resolution) of up to 512 K words per waveform can be generated. 128 waveforms with a total size of 4 M words can be saved to the internal non-volatile memory.
    [Show full text]
  • Two Teens and a Budget It Pays to Belong !
    Two Teens and a Budget It Paysays to Belong ! Two Teens and a Budget CHAPTER 1 - ANGELA Liam always insists that the car wasn’t the last straw. But trust me, it was. At least that’s what finally made dad explode at Uncle Billy’s house. And dad, like ... never explodes. Especially at Uncle Billy. Uncle Billy is that really rich, old, great uncle that everybody wishes they could have. And we actually have him. Lucky us, except of course, there’s a catch. Uncle Billy is totally useless. Not that he’s useless. He’s, like, super successful and filthy rich, and if you ask (or don’t ask), he’s more than happy to tell you all about his first job and his second job and his third job and his first business and his second business and … you get the picture. To hear Uncle Billy tell it, he was working while he was still in diapers. Whatever. Like anybody cares. Because he doesn’t do what rich, lonely uncles are supposed to do - such as adopt and lavish me with all the good things in life. Okay, maybe he’s not that lonely. He’s got Aunt Rose to keep him company and listen to how wonderful he is. And truthfully, I wouldn’t be all that good at that. But still. I’d listen if I thought it was worth my while. Which it’s totally not. As he likes to point out, the only valuables I’ll ever be getting from his will are jewels of advice.
    [Show full text]
  • The 1-Bit Instrument: the Fundamentals of 1-Bit Synthesis
    BLAKE TROISE The 1-Bit Instrument The Fundamentals of 1-Bit Synthesis, Their Implementational Implications, and Instrumental Possibilities ABSTRACT The 1-bit sonic environment (perhaps most famously musically employed on the ZX Spectrum) is defined by extreme limitation. Yet, belying these restrictions, there is a surprisingly expressive instrumental versatility. This article explores the theory behind the primary, idiosyncratically 1-bit techniques available to the composer-programmer, those that are essential when designing “instruments” in 1-bit environments. These techniques include pulse width modulation for timbral manipulation and means of generating virtual polyph- ony in software, such as the pin pulse and pulse interleaving techniques. These methodologies are considered in respect to their compositional implications and instrumental applications. KEYWORDS chiptune, 1-bit, one-bit, ZX Spectrum, pulse pin method, pulse interleaving, timbre, polyphony, history 2020 18 May on guest by http://online.ucpress.edu/jsmg/article-pdf/1/1/44/378624/jsmg_1_1_44.pdf from Downloaded INTRODUCTION As unquestionably evident from the chipmusic scene, it is an understatement to say that there is a lot one can do with simple square waves. One-bit music, generally considered a subdivision of chipmusic,1 takes this one step further: it is the music of a single square wave. The only operation possible in a -bit environment is the variation of amplitude over time, where amplitude is quantized to two states: high or low, on or off. As such, it may seem in- tuitively impossible to achieve traditionally simple musical operations such as polyphony and dynamic control within a -bit environment. Despite these restrictions, the unique tech- niques and auditory tricks of contemporary -bit practice exploit the limits of human per- ception.
    [Show full text]
  • Life in Two City States--- Athens and Sparta
    - . CHAPTER The city-states of Sparta (above) and Athens (below) were bitter rivals. Life in Two City-States Athens and Sparta 27.1 Introduction In Chapter 26, you learned that ancient Greece was a collection of city- states, each with its own government. In this chapter, you will learn about two of the most important Greek city-states, Athens and Sparta. They not only had different forms of government, but very different ways of life. Athens was a walled city near the sea. Nearby, ships came and went from a busy port. Inside the city walls, master potters and sculptors labored in work- shops. Wealthy people and their slaves strolled through the marketplace. Often the city's citizens (free men) gathered to loudly debate the issues of the day. Sparta was located in a farming area on a plain. No walls surrounded the city. Its buildings were simple and plain compared to those of Athens. Even the clothing of the people in the streets was drab. Columns of soldiers tramped through the streets, with fierce expressions behind their bronze helmets. Even a casual visitor could see that Athens and Sparta were very different. Let's take a closer look at the way people lived in these two city-states. We'll examine each city's government, economy, education, and treatment of women and slaves. Use this graphic organizer to help you compare various aspects of life in Athens and Sparta. Life in Two City-States: Athens and Sparta 259 27.2 Comparing Two City-States Peloponnesus the penin- Athens and Sparta were both Greek cities, and they were only sula forming the southern part about 150 miles apart.
    [Show full text]
  • Contribution of the Conditioning Stage to the Total Harmonic Distortion in the Parametric Array Loudspeaker
    Universidad EAFIT Contribution of the conditioning stage to the Total Harmonic Distortion in the Parametric Array Loudspeaker Andrés Yarce Botero Thesis to apply for the title of Master of Science in Applied Physics Advisor Olga Lucia Quintero. Ph.D. Master of Science in Applied Physics Science school Universidad EAFIT Medellín - Colombia 2017 1 Contents 1 Problem Statement 7 1.1 On sound artistic installations . 8 1.2 Objectives . 12 1.2.1 General Objective . 12 1.2.2 Specific Objectives . 12 1.3 Theoretical background . 13 1.3.1 Physics behind the Parametric Array Loudspeaker . 13 1.3.2 Maths behind of Parametric Array Loudspeakers . 19 1.3.3 About piezoelectric ultrasound transducers . 21 1.3.4 About the health and safety uses of the Parametric Array Loudspeaker Technology . 24 2 Acquisition of Sound from self-demodulation of Ultrasound 26 2.1 Acoustics . 26 2.1.1 Directionality of Sound . 28 2.2 On the non linearity of sound . 30 2.3 On the linearity of sound from ultrasound . 33 3 Signal distortion and modulation schemes 38 3.1 Introduction . 38 3.2 On Total Harmonic Distortion . 40 3.3 Effects on total harmonic distortion: Modulation techniques . 42 3.4 On Pulse Wave Modulation . 46 4 Loudspeaker Modelling by statistical design of experiments. 49 4.1 Characterization Parametric Array Loudspeaker . 51 4.2 Experimental setup . 52 4.2.1 Results of PAL radiation pattern . 53 4.3 Design of experiments . 56 4.3.1 Placket Burmann method . 59 4.3.2 Box Behnken methodology . 62 5 Digital filtering techniques and signal distortion analysis.
    [Show full text]
  • The Wild Robot.Pdf
    Begin Reading Table of Contents Copyright Page In accordance with the U.S. Copyright Act of 1976, the scanning, uploading, and electronic sharing of any part of this book without the permission of the publisher is unlawful piracy and theft of the author’s intellectual property. If you would like to use material from the book (other than for review purposes), prior written permission must be obtained by contacting the publisher at [email protected]. Thank you for your support of the author’s rights. To the robots of the future CHAPTER 1 THE OCEAN Our story begins on the ocean, with wind and rain and thunder and lightning and waves. A hurricane roared and raged through the night. And in the middle of the chaos, a cargo ship was sinking down down down to the ocean floor. The ship left hundreds of crates floating on the surface. But as the hurricane thrashed and swirled and knocked them around, the crates also began sinking into the depths. One after another, they were swallowed up by the waves, until only five crates remained. By morning the hurricane was gone. There were no clouds, no ships, no land in sight. There was only calm water and clear skies and those five crates lazily bobbing along an ocean current. Days passed. And then a smudge of green appeared on the horizon. As the crates drifted closer, the soft green shapes slowly sharpened into the hard edges of a wild, rocky island. The first crate rode to shore on a tumbling, rumbling wave and then crashed against the rocks with such force that the whole thing burst apart.
    [Show full text]
  • Chapter 27 Zoning Part 1 Title, Intent and Purposes
    CHAPTER 27 ZONING PART 1 TITLE, INTENT AND PURPOSES § 27-101. Title; Effect on Other Provisions; When Effective. § 27-102. Authority. § 27-103. General Intent and Objectives. § 27-104. Interpretation. § 27-105. Applicability. § 27-106. Abrogation. § 27-107. Repealer. § 27-108. Severability. PART 2 OFFICIAL ZONING MAP § 27-201. Official Zoning Map. PART 3 DEFINITIONS § 27-301. Interpretation. § 27-302. Definition of Terms. § 27-303. List of Definitions. PART 4 ZONING DISTRICT REGULATIONS § 27-401. Establishment of Zoning Districts. § 27-402. Zoning District Purposes. § 27-403. Zoning District Boundaries. § 27-404. Permitted Uses, Conditional Uses and Uses by Special Exception. § 27-405. Authorized Land Uses. § 27-406. TND General Provisions. § 27-407. TND Subareas. 27:1 12/16/2014 § 27-408. TND Blocks, Streets and Parking. § 27-409. Dimensional Standards. § 27-410. Height Exceptions. § 27-411. Permitted Projections into Required Setbacks. § 27-412. Lot Access. § 27-413. Accessory Buildings, Structures, Uses and Events. § 27-414. Screening and Landscaping for Off-Street Parking and Service Structures for Nonresidential, Multifamily Dwelling/Apartments, Single-Family Attached and Mixed Uses. § 27-415. Vegetation Preservation and Buffer Yards. § 27-416. Cellar Structures. § 27-417. Fences and Walls. § 27-418. Graphic References. PART 5 SUPPLEMENTAL REGULATIONS § 27-501. Hazardous Substances. § 27-502. Fuel Pumps. § 27-503. Temporary Construction Trailers or Sheds. § 27-504. Outdoor Display and Storage. § 27-504.1. Community Gardens/Market Gardens. § 27-505. Solar Collectors and Solar-Related Equipment. § 27-506. Wind Energy Conversion Systems. § 27-507. Signage. § 27-508. Hours of Operation. § 27-509. Outdoor Storage. § 27-510. Delivery Plan. PART 6 USES BY SPECIAL EXCEPTION § 27-601.
    [Show full text]
  • Pulse Width Modulation with Frequency Changing
    Pulse Width Modulation with Frequency Changing Milan Stork, Petr Weissar, and Kamil Kosturik Department of Applied Electronics and Telecommunications/RICE, Faculty of Electrical Engineering, Umiversity of West Bohemia, Czech Republic [email protected], [email protected], [email protected] Abstract generated using a simple oscillator) and a comparator. For the demodulation of the PWM signal the classical concept employs Pulse width modulation (PWM) is widely used in different a simple low pass filter. Another possibility is described in [3, applications. PWM transform the information in the 4]. There the demodulation is made in two steps. First the PWM amplitude of a bounded input signal into the pulse width signal is transformed into a pulse amplitude signal (PAM). As a output signal, without suffering from quantization noise. result we have an equidistant pulse train where the amplitude of The frequency of the output signal is usually constant. In the pulses contains the information. In the second step the PAM this paper the new PWM system with frequency changing signal is processed with a low pass filter. This reconstructs the (PWMF) is described. In PWMF the pulse width and also original signal waveform. These two step demodulation is frequency is changed, therefore 2 independents information exactly the reverse way to the uniform sampling process. The are simultaneously transmitted, and PWM and frequency main disadvantage is lowpass filter because slow response. The modulation (FM) are simultaneously used. But such system similar (speed limitation) is for FM signal. needs fast demodulator separately for PWM and FM. The In this paper is described new approach for fast circuit for fast demodulation of PWMF signal is also demodulation of PWM signal and also for FM signal.
    [Show full text]
  • The Last Days of John Lennon
    Copyright © 2020 by James Patterson Hachette Book Group supports the right to free expression and the value of copyright. The purpose of copyright is to encourage writers and artists to produce creative works that enrich our culture. The scanning, uploading, and distribution of this book without permission is a theft of the author’s intellectual property. If you would like permission to use material from the book (other than for review purposes), please contact [email protected]. Thank you for your support of the author’s rights. Little, Brown and Company Hachette Book Group 1290 Avenue of the Americas, New York, NY 10104 littlebrown.com twitter.com/littlebrown facebook.com/littlebrownandcompany First ebook edition: December 2020 Little, Brown and Company is a division of Hachette Book Group, Inc. The Little, Brown name and logo are trademarks of Hachette Book Group, Inc. The publisher is not responsible for websites (or their content) that are not owned by the publisher. The Hachette Speakers Bureau provides a wide range of authors for speaking events. To find out more, go to hachettespeakersbureau.com or call (866) 376-6591. ISBN 978-0-316-42907-8 Library of Congress Control Number: 2020945289 E3-111020-DA-ORI Table of Contents Cover Title Page Copyright Dedication Prologue Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 — Chapter 6 Chapter 7 Chapter 8 Chapter 9 Chapter 10 Chapter 11 Chapter 12 Chapter 13 Chapter 14 Chapter 15 Chapter 16 Chapter 17 Chapter 18 — Chapter 19 Chapter 20 Chapter 21 Chapter 22 Chapter 23 Chapter 24
    [Show full text]
  • Understanding Power System Harmonics
    Harmonics Chapter 1, Introduction April 2012 Understanding Power System Harmonics Prof. Mack Grady Dept. of Electrical & Computer Engineering University of Texas at Austin [email protected], www.ece.utexas.edu/~grady Table of Contents Chapter 1. Introduction Chapter 2. Fourier Series Chapter 3. Definitions Chapter 4. Sources Chapter 5. Effects and Symptoms Chapter 6. Conducting an Investigation Chapter 7. Standards and Solutions Chapter 8. System Matrices and Simulation Procedures Chapter 9. Case Studies Chapter 10. Homework Problems Chapter 11. Acknowledgements Appendix A1. Fourier Spectra Data Appendix A2. PCFLO User Manual Appendix A3. Harmonics Analysis for Industrial Power Systems (HAPS) User Manual and Files 1. Introduction Power systems are designed to operate at frequencies of 50 or 60Hz. However, certain types of loads produce currents and voltages with frequencies that are integer multiples of the 50 or 60 Hz fundamental frequency. These higher frequencies are a form of electrical pollution known as power system harmonics. Power system harmonics are not a new phenomenon. In fact, a text published by Steinmetz in 1916 devotes considerable attention to the study of harmonics in three-phase power systems. In Steinmetz’s day, the main concern was third harmonic currents caused by saturated iron in transformers and machines. He was the first to propose delta connections for blocking third harmonic currents. After Steinmetz’s important discovery, and as improvements were made in transformer and machine design, the harmonics problem was largely solved until the 1930s and 40s. Then, with the advent of rural electrification and telephones, power and telephone circuits were placed on common rights-of-way.
    [Show full text]