DOCSLIB.ORG

Laboratory Name Accreditation Standard Certificate Number Page

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Laboratory Name Accreditation Standard Certificate Number Page Laboratory Name ELECTRICAL RESEARCH AND DEVELOPMENT ASSOCIATION ERDA NORTH LABORATORY GURUGRAM, CBIP CENTRE OF EXCELLENCE GROUND FLOOR, PLOT NO. 21 SECTOR 32, GURGAON, HARYANA , INDIA Accreditation Standard ISO/IEC 17025:2017 Certificate Number TC-5728 Page No. : 1 / 64 Validity 31/07/2019 to 30/07/2021 Last Amended on - S.No Discipline / Group Product / Material of Specific Test Test Method Range of Testing/ Test Performed Specification Limits of Detection against which tests are performed Permanent Facility 1 ELECTRICAL- 1. Electrical and Test of Repeatability of IS 13779:1999 up to 300V1mA to ELECTRICAL Electronic (Static) errors (Reaffirmed 2014) CI. 120A45Hz to 55HzP.F. INDICATING & Energy Meter 2. No. 12.17 IS +1 to -1 RECORDING Prepayment/ Smart 14697:1999 INSTRUMENTS Meters (Reaffirmed 2014) CI. No. 12.16 CBIP Publication No.: 304:2008 CI. No. 5.6.9 CBIP Publication No.: 325:2015 Cl. No. 5.6.9 Cl. No. 5.6.7 of IS 15884:2010 Cl. No. 6.12 of IS 16444 (Part 1) : 2015 Cl. No. 6.12 of IS 16444 (Part 2) : 2017: 2017 This is annexure to 'Certificate of Accreditation' and does not require any signature. Laboratory Name ELECTRICAL RESEARCH AND DEVELOPMENT ASSOCIATION ERDA NORTH LABORATORY GURUGRAM, CBIP CENTRE OF EXCELLENCE GROUND FLOOR, PLOT NO. 21 SECTOR 32, GURGAON, HARYANA , INDIA Accreditation Standard ISO/IEC 17025:2017 Certificate Number TC-5728 Page No. : 2 / 64 Validity 31/07/2019 to 30/07/2021 Last Amended on - S.No Discipline / Group Product / Material of Specific Test Test Method Range of Testing/ Test Performed Specification Limits of Detection against which tests are performed 2 ELECTRICAL- 1. Electrical and Test of influence CI. No. 12.11 Of IS up to 300V1mA to ELECTRICAL Electronic (Static) Quantitya) Frequency 13779:1999 120A45 Hz to 55HzPF. INDICATING & Energy Meter 2. Variationb) Voltage (Reaffirmed 2014) CI. +1 to -167mT, 0.2T, RECORDING Prepayment/ Smart Variationc) DC No. 12.10 Of IS 0.27T & 0.5T0.5mT, INSTRUMENTS Meters Magnetic induction of 14697:1999 10mT, & 0.2T0.5T & external origind) AC (Reaffirmed 2014) CI. 0.27T Magnetic induction of No. 5.6.2 Of CBIP external origine) Publication No.: Magnetic induction of 304:2008 Cl. No. 5.6.2 Permanent Magnet Of CBIP Publication No.: 325:2015 IEC 62052-11:2016 Cl. No. 8.2 of IEC 62053- 21:2016 Cl. No. 8.2 of IEC 62053-22:2016 Cl. No. 8.2 of IEC 62053- 23:2016, Cl. No. 8.3 of IEC 62053-24:2016, Cl. No. 4.6.2 of IS 15884:2010 Cl. No. 6.12 of IS 16444 (Part 1) : 2015 Cl. No. 6.12 of IS 16444 (Part 2) : 2017 Cl. No. 8 of IEC 62055-31:2005: 2005 This is annexure to 'Certificate of Accreditation' and does not require any signature. Laboratory Name ELECTRICAL RESEARCH AND DEVELOPMENT ASSOCIATION ERDA NORTH LABORATORY GURUGRAM, CBIP CENTRE OF EXCELLENCE GROUND FLOOR, PLOT NO. 21 SECTOR 32, GURGAON, HARYANA , INDIA Accreditation Standard ISO/IEC 17025:2017 Certificate Number TC-5728 Page No. : 3 / 64 Validity 31/07/2019 to 30/07/2021 Last Amended on - S.No Discipline / Group Product / Material of Specific Test Test Method Range of Testing/ Test Performed Specification Limits of Detection against which tests are performed 3 ELECTRICAL- 1. Electrical and Test of limits of errors/ IS 13779:1999 up to 300V,1mA to ELECTRICAL Electronic (Static) Test of Accuracy (Reaffirmed 2014) CI. 120A45Hz to 55HzP.F INDICATING & Energy Meter 2. requirement No. 11.1 IS +1 to -1 RECORDING Prepayment/ Smart 14697:1999 INSTRUMENTS Meters (Reaffirmed 2014) CI. No. 11.1 CBIP Publication No.: 304:2008 CI. No. 5.6.8 CBIP Publication No.: 325:2015 Cl. No. 4.6.2 IEC 62052-11:2016 IEC 62053-21:2016, Cl. No. 8.1 IEC 62053- 22:2016, Cl. No. 8.1 IEC 62053-23:2016, Cl. No. 8.1 IEC 62053- 24:2016, Cl. No. 8.2 IEC 62055-31:2005, Cl. No. 8.0 IS 13875 (Part 1 & 3):1993 Cl. No. 4.6.1 of IS 15884:2010 Cl. No. 6.12 of IS 16444 (Part 1) : 2015 Cl. No. 6.12 of IS 16444 (Part 2) : 2017 Cl: 2005 This is annexure to 'Certificate of Accreditation' and does not require any signature. Laboratory Name ELECTRICAL RESEARCH AND DEVELOPMENT ASSOCIATION ERDA NORTH LABORATORY GURUGRAM, CBIP CENTRE OF EXCELLENCE GROUND FLOOR, PLOT NO. 21 SECTOR 32, GURGAON, HARYANA , INDIA Accreditation Standard ISO/IEC 17025:2017 Certificate Number TC-5728 Page No. : 4 / 64 Validity 31/07/2019 to 30/07/2021 Last Amended on - S.No Discipline / Group Product / Material of Specific Test Test Method Range of Testing/ Test Performed Specification Limits of Detection against which tests are performed 4 ELECTRICAL- 1. Electrical and Test of Meter Constant IS 13779:1999 up to 300V1mA to ELECTRICAL Electronic (Static) (Reaffirmed 2014) CI. 120A45Hz to 55HzP.F: INDICATING & Energy Meter 2. No. 12.15 IS +1 to -1 RECORDING Prepayment/ Smart 14697:1999 INSTRUMENTS Meters (Reaffirmed 2014) CI. No. 12.14 CBIP Publication No.: 304:2008 CI. No. 5.6.6 CBIP Publication No.: 325:2015 Cl. No. 5.6.6 IEC 62052-11:2016 IEC 62053-21:2016, Cl. No. 8.4 IEC 62053- 22:2016, Cl. No. 8.4 IEC 62053-23:2016, Cl. No. 8.4 IEC 62053- 24:2016, Cl. No. 8.5 Cl. No. 5.6.5 of IS 15884:2010 Cl. No. 6.12 of IS 16444 (Part 1) : 2015 Cl. No. 8 of IEC 62055-31:2005 Cl. No. 6.12 of IS 16444 (Part 2) : 2017: 2017 This is annexure to 'Certificate of Accreditation' and does not require any signature. Laboratory Name ELECTRICAL RESEARCH AND DEVELOPMENT ASSOCIATION ERDA NORTH LABORATORY GURUGRAM, CBIP CENTRE OF EXCELLENCE GROUND FLOOR, PLOT NO. 21 SECTOR 32, GURGAON, HARYANA , INDIA Accreditation Standard ISO/IEC 17025:2017 Certificate Number TC-5728 Page No. : 5 / 64 Validity 31/07/2019 to 30/07/2021 Last Amended on - S.No Discipline / Group Product / Material of Specific Test Test Method Range of Testing/ Test Performed Specification Limits of Detection against which tests are performed 5 ELECTRICAL- 1. Electrical and Test of No Load IS 13779:1999 up to 300V45Hz to ELECTRICAL Electronic (Static) Condition (Reaffirmed 2014) CI. 55HzPF.; +1 to -1 INDICATING & Energy Meter 2. No. 12.13 IS RECORDING Prepayment/ Smart 14697:1999 INSTRUMENTS Meters (Reaffirmed 2014) CI. No. 12.12 CBIP Publication No.: 304:2008 CI. No. 5.6.4 CBIP Publication No.: 325:2015 Cl. No. 5.6.4 IEC 62052-11:2016 IEC 62053-21:2016, Cl. No. 8.3 IEC 62053- 22:2016, Cl. No. 8.3 IEC 62053-23:2016, Cl. No. 8.3 IEC 62053- 24:2016, Cl. No. 8.4 Cl. No. 5.6.3 of IS 15884:2010 Cl. No. 6.12 of IS 16444 (Part 1) : 2015 Cl. No. 6.12 of IS 16444 (Part 2) : 2017 Cl. No. 8 of IEC 62055-31:2005: 2005 This is annexure to 'Certificate of Accreditation' and does not require any signature. Laboratory Name ELECTRICAL RESEARCH AND DEVELOPMENT ASSOCIATION ERDA NORTH LABORATORY GURUGRAM, CBIP CENTRE OF EXCELLENCE GROUND FLOOR, PLOT NO. 21 SECTOR 32, GURGAON, HARYANA , INDIA Accreditation Standard ISO/IEC 17025:2017 Certificate Number TC-5728 Page No. : 6 / 64 Validity 31/07/2019 to 30/07/2021 Last Amended on - S.No Discipline / Group Product / Material of Specific Test Test Method Range of Testing/ Test Performed Specification Limits of Detection against which tests are performed 6 ELECTRICAL- 1. Electrical and Test of Power IS 13779:1999 up to 300V1mA to ELECTRICAL Electronic (Static) Consumption Test (Reaffirmed 2014) CI. 120A,45Hz to 55HzP.F. INDICATING & Energy Meter 2. No. 12.7.1 IS +1 to -1 RECORDING Prepayment/ Smart 14697:1999 INSTRUMENTS Meters (Reaffirmed 2014) CI. No. 12.7.1 CBIP Publication No.: 304:2008 CI. No. 5.4.1 CBIP Publication No.: 325:2015 Cl. No. 5.4.1 IEC 62052-11:2016 IEC 62053-21:2016, Cl. No. 7.1 IEC 62053- 22:2016, Cl. No. 7.1 IEC 62053-23:2016, Cl. No. 7.1 IEC 62053- 24:2016, Cl. No. 7.2 Cl. No. 5.4.1 of IS 15884:2010 Cl. No. 6.10.1 of IS 16444 (Part 1) : 2015 Cl. No. 6.10.1 of IS 16444 (Part 2) : 2017 Cl. No. 7.3 of IEC 62055- 31:2005: 2005 This is annexure to 'Certificate of Accreditation' and does not require any signature. Laboratory Name ELECTRICAL RESEARCH AND DEVELOPMENT ASSOCIATION ERDA NORTH LABORATORY GURUGRAM, CBIP CENTRE OF EXCELLENCE GROUND FLOOR, PLOT NO. 21 SECTOR 32, GURGAON, HARYANA , INDIA Accreditation Standard ISO/IEC 17025:2017 Certificate Number TC-5728 Page No. : 7 / 64 Validity 31/07/2019 to 30/07/2021 Last Amended on - S.No Discipline / Group Product / Material of Specific Test Test Method Range of Testing/ Test Performed Specification Limits of Detection against which tests are performed 7 ELECTRICAL- 1. Electrical and AC High Voltage Test IS 13779:1999 1 KV to 5 KV ELECTRICAL Electronic (Static) (Reaffirmed 2014) CI. INDICATING & Energy Meter2. No. 12.7.6.3 IS RECORDING Prepayment/ Smart 14697:1999 INSTRUMENTS Meters (Reaffirmed 2014) CI. No.12.7.6.3 CBIP Publication No.: 304:2008 CI. No. 5.4.6.3 CBIP Publication No.: 325:2015 Cl. No. 5.4.6.3 IEC 62052- 11:2016, Cl. No. 7.3 IEC 62052-31:2015, Cl. No. 6.10 IEC 62053- 21:2016, Cl. No. 7.4 IEC 62053-22:2016, Cl. No. 7.4 IEC 62053- 23:2016, Cl. No. 7.4 IEC 62053-24:2016, Cl.
Load more

Recommended publications
  • IS 649 (1997): Methods for Testing Steel Sheets for Magnetic Circuits of Power Electrical Apparatus [MTD 4: Wrought Steel Products]
    इंटरनेट मानक Disclosure to Promote the Right To Information Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public. “जान का अधकार, जी का अधकार” “परा को छोड न 5 तरफ” Mazdoor Kisan Shakti Sangathan Jawaharlal Nehru “The Right to Information, The Right to Live” “Step Out From the Old to the New” IS 649 (1997): Methods for testing steel sheets for magnetic circuits of power electrical apparatus [MTD 4: Wrought Steel Products] “ान $ एक न भारत का नमण” Satyanarayan Gangaram Pitroda “Invent a New India Using Knowledge” “ान एक ऐसा खजाना > जो कभी चराया नह जा सकताह ै”ै Bhartṛhari—Nītiśatakam “Knowledge is such a treasure which cannot be stolen” IS 649 : 1997 METHODS OF TESTING STEEL SHEETS FOR MAGNETIC CIRCUITS OF POWER ELECTRICAL APPARATUS ( Secod Revision, ) ICS 77.1403); 77.IJO.W; 2O.O-K~.10 BUREAU OF INDIAN STANDARDS h4ANAK BIHAVAN, 9 BAHADUR SHAIH ZAFAR h4ARC; NEW DELHI 1 10002 l’rice Croup 1 1 Wrought Steel Products Sectional Committee MTD 4 FOREWORD This Indian Standard (Second Revision) was adopted by the Bureau of Indian Standards, after the draft finalized by the Wrought Steel Products Sectional Committee had been approved by the Metallurgical Engineering Division Council.
    [Show full text]
  • Title Here Electricity, Magnetism And… Survival
    3/1/2015 Electricity,Title Magnetism Here and… Survival Author Steve Constantinides,Venue Director of Technology Arnold Magnetic TechnologiesDate Corporation March 1, 2015 1 © Arnold Magnetic Technologies [email protected] What we do… Performance materials enabling energy efficiency Magnet Permanent High Precision Thin Production & Magnet Performance Metals Fabrication Assemblies Motors • Specialty Alloys from 0.000069” ~1.75 microns • Rare Earth • Precision • Smaller, Faster, • Sheets, Strips, & Samarium Cobalt Component Hotter motors Coils (RECOMA®) Assembly • Power dense • Milling, Annealing, • Alnico • Tooling, package Coating, Slitting • Injection molded Machining, • High RPM magnet • ARNON® Motor • Flexible Rubber Cutting, Grinding containment Lamination • Balancing • >200°C Operation Material • Sleeving • Light‐weighting Engineering | Consulting | Testing Stabilization & Calibration | Distribution 2 © Arnold Magnetic Technologies 1 3/1/2015 Agenda • Energy and Magnetism • Permanent Magnets and Motors • Applications • Soft magnetic materials • Future of magnetic materials 3 © Arnold Magnetic Technologies Energy in-Efficiency 25.8 65% is waste energy 38.2 60.6% Lost Energy 39.4% “Useful” Delivered Energy Additional losses at end use applications A quad is a unit of energy equal to 1015 (a short-scale quadrillion) BTU, or 1.055 × 1018 joules (1.055 exajoules or EJ) in SI units. 4 © Arnold Magnetic Technologies 2 3/1/2015 Renewable Energy Electricity Generation (USA) U.S. 4.8% of total production CHP= Combined Heat
    [Show full text]
  • Slr-Pc – 280 B
    www.downloadmela.com *SLRPC280B* SLR-PC – 280 B Seat Set No. A T.E. Information Technology (Part – II) Examination, 2015 Self Learning HSS NETWORK SETUP AND MANAGEMENT (New) Day and Date : Tuesday, 26-5-2015 Max. Marks : 50 Time : 3.00 p.m. to 5. 00 p.m. Instructions : 1) Q. No. 1 is compulsory. It should be solved in first 15 minutes in Answer Book Page No. 3. Each question carries one mark. 2) Answer MCQ/Objective type questions on Page No. 3 only. Don’t forget to mention, Q.P. Set (A/B/C/D) on Top of Page. MCQ/Objective Type Questions Duration : 15 Minutes Marks :10 1. Choose the correct answer (10×1=10) 1) ____________ are usually used to extend a connection to a remote host. A) Repeater B) Router C) Firewall D) None of these 2) A ___________ creates a collision domain on each port. A) Ethernet Switch B) Hub C) Router D) none of the choices are correct 3) __________ are virtual separation within switch that provide distinct logical LANs that each behave as if they were configured on a separate physical switch. A) Router B) VPN C) VLAN D) none of the choices are correct 4) If the address of destination is not on a local network, the packet must be forwarded to ______________ A) Switch B) Hub C) Gateway D) none of the choices are correct P.T.O. www.downloadmela.com - World's number one free educational download portal www.downloadmela.com SLR-PC – 280 B -2- *SLRPC280B* 5) OSPF is used for ____________ A) Routing of packets B) Shortest path routing of packets C) Simulation of packets D) None of the choices are correct 6) _____________ running as an application on a server may share the server with other functions such as DNS or mail, though generally and restrict its activities to security-related tasks.
    [Show full text]
  • (Η Vwatts Tf BK W ( = (Η
    UNIT I – MAGNETIC CIRCUITS AND MAGNETIC MATERIALS PART - A 1. Define magnetic flux density. (Nov - 2017) It is the flux per unit area at right angles to the flux it is denoted by B and unit is Weber/m2. 2. Define self-inductance. (Nov - 2017) The property of a coil that opposes any change in the amount of current flowing through it is called self-inductance. 3. Define relative permeability. (May - 2017) It is equal to the ratio of flux density produced in that material to the flux density produced in air by the same magnetizing force μ r=μ /μ 0 4. Give the expression for hysteresis losses and eddy current losses. (May - 2017) 1.6 2 Hysteresis loss = W (Bmax ) fVWatts 2 2 2 Eddy Current Loss = We K e (Bmax ) f t VWatts 5. What is a hysteresis loss? (Nov - 2016) o Energy loss takes place due to the molecular friction in the material. o This loss is in the form of heat 1.6 2 o Hysteresis loss = W (Bmax ) fVWatts 6. Define flux linkage. (Nov - 2016) Flux linkage is the magnetic flux running through, or "linked" to a coil, so the field strength times the coil area. The product of the magnetic flux and the number of turns in a given coil. Φ = nφ = nBA Where, n is Number of turns in a coil, B is Field Strength, A is area of coil. 7. State Ampere’s law. (May - 2016) The line integral of the magnetic field around some closed loop is equal to the times the algebraic sum of the currents which pass through the loop.
    [Show full text]
  • Designing with Thin Gauge
    Designing with Thin Gauge Presented by Steve Constantinides, Director of Technology Arnold Magnetic Technologies SMMA Fall Technical Conference, October 2008 Our world touches your world every day… 1 • Demand for electrical device efficiency gains which started decades ago due to economic factors have accelerated, propelled by the unprecedented rise in energy costs and the alleged impact of energy consumption on global weather instability. © 2008 Arnold Magnetic Technologies Agenda • Introduction • Manufacturing Process • GOES versus NGOES • Motor Efficiency • Loss Factors • NGO Thin Gauge (Arnon) Our world touches your world every day… 2 • Over the last several years I’ve spoken about permanent magnets. However, the magnetic material that is utilized in far great tonnage than magnets is the family of soft magnetic materials, especially Iron-Silicon whose usage spans both motor/generator and transformer/inductor applications. • Often referred to as Electrical Steel, Iron Silicon is available in both Grain Oriented (GOES) and Non-Oriented (NGOES) forms. © 2008 Arnold Magnetic Technologies Two Main Applications for Electrical Steel Handbook of Small Electric Motors Switched Reluctance Motors and their Control, p.154 T.J.E. Miller Our world touches your world every day… 3 • There are two main uses for Electrical Steel: Transformers/Inductors and Motors/Generators. • Transformers are used not only for Electrical Power Distribution, but in virtually every power supply in every electrically powered electronic device in offices and homes. • Motors have moved from industrial uses in the 1800 and early 1900’s to home and automotive uses. In homes for example, we use motors in garage door openers, washing machines and dryers, furnaces for home heating, refrigerator compressor pumps, bathroom exhaust fans, garbage disposals, and electric powered hand tools.
    [Show full text]
  • Partial Core Power Transformer
    Partial Core Power Transformer Ming Zhong, B.E.(Hons) A thesis submitted in partial fulfillment of the requirement for the degree of Master of Engineering in Electrical and Computer Engineering at the University of Canterbury, Christchurch, New Zealand. April 2012 a b Abstract This thesis describes the design, construction, and testing of a 15kVA, 11kV/230V partial core power transformer (PCPT) for continuous operation. While applications for the partial core transformer have been developed for many years, the concept of constructing a partial core transformer, from conventional copper windings, as a power transformer has not been investigated, specifically to have a continuous operation. In this thesis, this concept has been investigated and tested. The first part of the research involved creating a computer program to model the physical dimensions and the electrical performance of a partial core transformer, based on the existing partial core transformer models. Also, since the hot-spot temperature is the key factor for limiting the power rating of the PCPT, the second part of the research investigates a thermal model to simulate the change of the hot-spot temperature for the designed PCPT. The cooling fluid of the PCPT applied in this project was BIOTEMP ®. The original thermal model used was from the IEEE Guide for Loading Mineral-Oil-Immersed transformer. However, some changes to the original thermal model had to be made since the original model does not include BIOTEMP ® as a type of cooling fluid. The constructed partial core transformer was tested to determine its hot-spot temperature when it is immersed by BIOTEMP ®, and the results compared with the thermal model.
    [Show full text]
  • Frequency Response Modeling of Transformer Windings Utilizing the Equivalent Parameters of a Laminated Core
    energies Article Frequency Response Modeling of Transformer Windings Utilizing the Equivalent Parameters of a Laminated Core Konstanty Marek Gawrylczyk * and Katarzyna Trela West Pomeranian University of Technology in Szczecin, Sikorskiego 37, 70-310 Szczecin, Poland; [email protected] * Correspondence: [email protected] Received: 17 May 2019; Accepted: 18 June 2019; Published: 20 June 2019 Abstract: The aim of the article is to present the method for modeling transformer winding inductance, taking into account the complex magnetic permeability and equivalent electric conductivity of the magnetic core. In the first stage of the research, a physical model of a 24-turn coil wound on the distribution transformer core was prepared. The Frequency Response Analysis (FRA) measurements of the coil were taken; then, the inductance of the coil as a function of frequency was calculated from the received frequency response curves. In the second stage, two-dimensional (2D) and three-dimensional (3D) computer models of the coil based on the finite element method (FEM) were established. In order to obtain the equivalent inductance characteristics of the winding modeled in 2D and 3D in a wide frequency range, the equality of the reluctance of the limbs and yokes in both models was assured. In the next stage of the research, utilization of the equivalent properties for the laminated magnetic material simulations was proposed. This outcome can be used to calculate the frequency response of the winding of the power transformer. The other obtained result is the method for modeling the resonance slope, which is visible on the inductance curve received from the FRA measurement.
    [Show full text]
  • Electrical Steel (Crgo)
    Grain-Oriented Electrical Steel Technical Data Sheet Grain-Oriented Electrical Steel Available in the Following Thicknesses: 7-mil or 0.007" (0.18 mm) 9-mil or 0.009" (0.23 mm) 11-mil or 0.011" (0.27 mm) 12-mil or 0.012" (0.30 mm) 14-mil or 0.014" (0.35 mm) Technical Services GOES Strategic Business Unit - Bagdad Plant 585 Silicon Drive Leechburg, PA 15656 U.S.A. GOES Technical Information and Inside Sales 800-289-7454 Data are typical, are provided for informational purposes, and should not be construed as maximum or minimum values for specification or Allegheny Technologies Incorporated for final design, or for a particular use or application. The data may be revised anytime without notice. We make no representation or 1000 Six PPG Place warranty as to its accuracy and assume no duty to update. Actual data on any particular product or material may vary from those shown Pittsburgh, PA 15222-5479 U.S.A. herein. TM is trademark of and ® is registered trademark of ATI Properties, Inc. or its affiliated companies. ® The starburst logo is a www.ATImetals.com registered trademark of ATI Properties, Inc. © 2012 ATI. All rights reserved. VERSION 1 (3/1/2012): PAGE 1 of 32 Grain-Oriented Electrical Steel Technical Data Sheet TABLE OF CONTENTS Introduction .......................................................................... 3 Typical Physical Properties ................................................. 3 Typical Mechanical Properties.... ........................................ 4 Coatings and Insulation ......................................................
    [Show full text]
  • Ee2451 - Electrical Energy Generation, Conservation & Utilization Unit V – Electric Traction
    EE2451 - ELECTRICAL ENERGY GENERATION, CONSERVATION & UTILIZATION UNIT V – ELECTRIC TRACTION PART-A 33. What are the essentials of a good braking system? 1. What are the requirements of an ideal traction system? (NOV/DEC 12) 34. What are the recent trends in electric traction? (May/Jun 13), (APR/MAY 2. Classify the supply system for electric traction. 14) 3. What are the advantages and disadvantages of electric traction? 35. What is plugging? 4. What is speed time curve and why it is used? 36. What is Rheostatic braking? 5. What are the types of speed used for traction? 6. What are the factors affecting schedule speed? 37. What is Regenerative braking? 7. What are the motors used in traction system? 38. What are the advantages of Regenerative braking? 8. What are the factors affecting energy consumption? 39. What are the disadvantages of Regenerative braking? 9. What is meant by mechanical braking? Name the types of brakes used. 40. What are the disadvantages of electric traction? (May/Jun 13) 10. Name the various systems of current collection system and where are they 41. Name the advanced methods in speed control of traction motors. employed? 42. What are the advantages of microprocessor based control of traction 11. Name the systems of traction. motors? 12. What are the advantages of electric traction? (Apr/May 10) 13. How would you analyze the speed time curve for electric train? 43. Define the continuous rating of motor. (Apr/May 10) 14. What is crest speed? (NOV/DEC 12) 44. Why induction motor is is preferred for industrial applications.
    [Show full text]
  • Electrical Machines – I
    EE6401 - ELECTRICAL MACHINES – I QUESTION BANK (2 MARK Q & A, 16 MARK Q) UNIT - I MAGNETIC CIRCUITS AND MAGNETIC MATERIALS 1. What is magnetic circuit? The closed path followed by magnetic flux is called magnetic circuit. 2. Define magnetic flux? The magnetic lines of force produced by a magnet is called magnetic flux it is denoted as Ф and its unit is Weber 3. Define magnetic flux density? It is the flux per unit area at right angles to the flux it is denoted by B and unit is Weber/m2. 4. Define magneto motive force? MMF is the cause for producing flux in a magnetic circuit. the amount of flux setup in the core decent upon current(I)and number of turns(N).the product of NI is called MMF and it determine the amount of flux setup in the magnetic circuit MMF=NI ampere turns (AT) 5. Define reluctance? The opposition that the magnetic circuit offers to flux is called reluctance. It is defind as the ratio of MMF to flux. It is denoted by S and its unit is AT/m . 6. What is retentivity? The property of magnetic material by which it can retain the magnetism even after the removal of inducing source is called retentively . 7. Define permeance? It is the reciprocal of reluctance and is a measure of the cause the ease with which flux can pass through the material its unit is wb/AT. 8. Define magnetic flux intensity? It is defined as the mmf per unit length of the magnetic flux path.
    [Show full text]
  • DESIGN of HIGH VOLTAGE TRANSFORMER USING FINITE ELEMENT METHOD M.Leela Nivashini, K.Madhumitha, S.Sindhu, Dr.R.V.Maheswari
    INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH VOLUME 9, ISSUE 03, MARCH 2020 ISSN 2277-8616 DESIGN OF HIGH VOLTAGE TRANSFORMER USING FINITE ELEMENT METHOD M.Leela Nivashini, K.Madhumitha, S.Sindhu, Dr.R.V.Maheswari Abstract—: A transformer is a static device that is mainly used for stepping up and down the voltage level. The Power transformer is a kind of transformer that is used to transfer electrical energy in any part of the electrical circuit between the generator and the distribution primary circuits. These transformers area unit employed in distribution systems to interface intensify and step down voltages. The transformer is important in transmission and distribution hence their testing is also essentially equal. The cost of a high voltage transformer is too high and also unavoidable equipment in that domain, hence it has to be designed properly before implementation in real-time. Simulating the transformer with the designed parameters will give the same results as in the real model. So it is easy for analyzing the EF distribution and calculating the losses and that can be easily avoided while implementing in real-time. The simulation of a three-phase 11/0.4 KV power transformer using the Finite Element Method is carried out in this project. Index Terms— Power transformer, Losses —————————— —————————— 1 INTRODUCTION Electrical device could be a passive device that transfers 2 POWER TRANSFORMER electricity between 2 or a lot of circuits. Current in the primary winding produces magnetic flux, this in turn creates variable 2.1 DESCRIPTION EMF in the secondary winding of the same electrical device.
    [Show full text]
  • Magnetic Properties of Electrical Steel, Power Transformer Core Losses and Core Design Concepts
    Magnetic Properties of Electrical Steel, Power Transformer Core Losses and Core Design Concepts Zur Erlangung des akademischen Grades eines DOKTOR-INGENIEURS an der Fakultät für Elektrotechnik und Informationstechnik des Karlsruher Institutes für Technologie (KIT) genehmigte DISSERTATION von Dipl.-Ing. Christian Freitag geb. in: Malsch Tag der mündlichen Prüfung: 9. Februar 2017 Hauptreferent: Prof. Dr.-Ing. Thomas Leibfried Korreferent: Prof. Dr.-Ing. Stefan Tenbohlen This document is licensed under the Creative Commons Attribution 3.0 DE License (CC BY 3.0 DE): http://creativecommons.org/licenses/by/3.0/de/ Danksagung (Acknowledgments) Die vorliegende Arbeit entstand während meiner Tätigkeit als wissenschaftlicher Mitar- beiter am Institut für Elektroenergiesysteme und Hochspannungstechnik (IEH) des Karls- ruher Instituts für Technologie (KIT). Im Folgenden möchte ich mich bei allen bedanken, die mich während dieser Zeit begleitet und unterstützt haben. Besonderer Dank gebührt Herrn Prof. Dr.-Ing. Thomas Leibfried für die Möglichkeit zur Promotion und die Übernahme des Hauptreferates. Des Weiteren danke ich ihm für das Interesse an meiner Arbeit, die hervorragenden Arbeitsbedingungen sowie die fachliche Förderung und Unterstützung. Herrn Prof. Dr.-Ing. Stefan Tenbohlen von der Universität Stuttgart danke ich für die Übernahme des Korreferates und sein großes Interesse an der Thematik dieser Arbeit. Bei allen ehemaligen und jetzigen Kollegen des Institutes bedanke ich mich für das ange- nehme Arbeitsklima und die gute Zusammenarbeit. Für den fachlichen Austausch und die hilfreichen Diskussionen auf dem Gebiet der Leistungstransformatoren bzw. deren Simu- lation möchte ich Herrn Dr.-Ing. Daniel Geißler und Herrn Dipl.-Ing. Benjamin Klaus herzlich danken. Ausdrücklich möchte ich Herrn Dr.-Ing. habil. Martin Sack erwähnen, der mir im Bereich Messtechnik wertvolle Hinweise und Anregungen gab.
    [Show full text]