Smart Wash & Dry Electric Seat KAWNDBIDETA Quick Start Guide

Table of Contents Safety & Warnings 2 In the Box 3 Product Overview 4 Installation 5 Operation 9 Cleaning and Maintenance 12 Specifications 15

1 Safety & Warnings In the Box

Do not disassemble, repair or modify the product. Smart Wash & Dry Electric Do not immerse the product in water. Manual Spanner Avoid installing the product in a high humidity location. Do not touch any of the power electronics with wet hands. Filter Ensure the product is plugged into a power outlet that uses a grounding wire. Only connect to a 240V power outlet. Rubber gasket Do not use the product if the power cable has been damaged in any way. Spare front wash nozzle Do not stand on the toilet seat cover, seat or any of the accessories. Do not open or close the toilet lid roughly. Spare rear wash nozzle Do not drag or bend the water pipe. PE inter Avoid installing the product in an area where it may experience freezing temperatures. Freezing water can expand and damage the internal plumbing of the product. Fix bracket Do not leave the seat warmer function on for long periods of time. This product is not intend for the use by persons (including children) with reduced Two metal brackets physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the product Two mounting bolts by a person responsible for their safety. Children should be supervised to ensure they do not play with the product. Two rubber sleeves

T valve

Dimension

2 3 Safety & Warnings In the Box

Do not disassemble, repair or modify the product. Smart Wash & Dry Electric Toilet Seat Do not immerse the product in water. Manual Spanner Avoid installing the product in a high humidity location. Do not touch any of the power electronics with wet hands. Filter Ensure the product is plugged into a power outlet that uses a grounding wire. Only connect to a 240V power outlet. Rubber gasket Do not use the product if the power cable has been damaged in any way. Spare front wash nozzle Do not stand on the toilet seat cover, seat or any of the accessories. Do not open or close the toilet lid roughly. Spare rear wash nozzle Do not drag or bend the water pipe. PE inter Avoid installing the product in an area where it may experience freezing temperatures. Freezing water can expand and damage the internal plumbing of the product. Fix bracket Do not leave the seat warmer function on for long periods of time. This product is not intend for the use by persons (including children) with reduced Two metal brackets physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the product Two mounting bolts by a person responsible for their safety. Children should be supervised to ensure they do not play with the product. Two rubber sleeves

T valve

Dimension

2 3 Product Overview Installation

Before installation make sure there is a clean water outlet and 240V power socket near the toilet for the product to be connected to. Please connect water first, then connect Seat lid electric power. Cushion pad Install T valve

1 .Shut off the water to the flush tank and unscrew the inlet pipe. (Picture 1) 2.Connect the T valve with the gasket to the water pipe. (Picture 2)

Deodorizing box(inside) Damper Reconnect the toilet flush tank inlet pipe to the top of the T valve. (Picture 3). Do not turn the water back on yet. Warm air drying

Control panel Seated-sensor switch

Flush tank T valve Rear wash

Seat Front wash Water pipes Gasket Valve

OFF Valve Valve PE lnter Mounting bolts Rubber sleeves Picture 1 Picture 2 Picture 3

Gasket Spanner Metal gasket x2

T valve

Fix bracket

Water pipeline connecting accessories Fix machine parts

Attention: The specification, design and color of the instruction may differ from the end-product you bought. ln the case, you d better refer to the end-product about the assemblies.

4 5 Product Overview Installation

Before installation make sure there is a clean water outlet and 240V power socket near the toilet for the product to be connected to. Please connect water first, then connect Seat lid electric power. Cushion pad Install T valve

1 .Shut off the water to the toilets flush tank and unscrew the inlet pipe. (Picture 1) 2.Connect the T valve with the gasket to the water pipe. (Picture 2)

Deodorizing box(inside) Damper Reconnect the toilet flush tank inlet pipe to the top of the T valve. (Picture 3). Do not turn the water back on yet. Warm air drying

Control panel Seated-sensor switch

Flush tank T valve Rear wash

Seat Front wash Water pipes Gasket Valve

OFF Valve Valve PE lnter Mounting bolts Rubber sleeves Picture 1 Picture 2 Picture 3

Gasket Spanner Metal gasket x2

T valve

Fix bracket

Water pipeline connecting accessories Fix machine parts

Attention: The specification, design and color of the instruction may differ from the end-product you bought. ln the case, you d better refer to the end-product about the assemblies.

4 5 Remove the Original Seat Install the

Remove the original toilet seat. Loosen the nut and remove the seat. 1. Push the bidet toilet seat into the fix bracket.

Fix bracket Bolt Noumenon Toilet seat Gasket

Nuts

Release

Connect Water Inlet Pipe Install the Fix Bracket 1 . Push the PE inter into the T valve connector. . 1 Place the rubber sleeves into the seat installation holes of the toilet base. 2. Push the PE inter into the bidet connector. 2.Place the fix bracket in place and install it with the metal brackets and mounting bolts

Screw mounting bolts

Metal bracket Toilet tank fix bracket

rubber sleeves

T valve

PE lnter valve

6 7 Remove the Original Seat Install the Bidet

Remove the original toilet seat. Loosen the nut and remove the seat. 1. Push the bidet toilet seat into the fix bracket.

Fix bracket Bolt Noumenon Toilet seat Gasket

Nuts

Release

Connect Water Inlet Pipe Install the Fix Bracket 1 . Push the PE inter into the T valve connector. . 1 Place the rubber sleeves into the seat installation holes of the toilet base. 2. Push the PE inter into the bidet connector. 2.Place the fix bracket in place and install it with the metal brackets and mounting bolts

Screw mounting bolts

Metal bracket Toilet tank fix bracket rubber sleeves

T valve

PE lnter valve

6 7 Operation

Prep and Test

1. Plug the bidet into a power socket

2. Turn the water back on by opening the valve.

3. All indicator lights should turn on and water will start flowing into the inner water tank of the bidet. This process should take about 11 seconds. Indicators lights will turn off when done.

4. Press the power button on the bidet controls. The power indicator light should turn on, indicating the bidet is ready for operation.

5. Adjust the water and seat temperature as desired.

6. Following operating instructions and test every function.

8 9 Operation

Prep and Test

1. Plug the bidet into a power socket

2. Turn the water back on by opening the valve.

3. All indicator lights should turn on and water will start flowing into the inner water tank of the bidet. This process should take about 11 seconds. Indicators lights will turn off when done.

4. Press the power button on the bidet controls. The power indicator light should turn on, indicating the bidet is ready for operation.

5. Adjust the water and seat temperature as desired.

6. Following operating instructions and test every function.

8 9 Button Functions Buzzer Indicators

Rear Wash – Rear cleansing Buzzes Once: Receives instruction from controller.

Front Wash – Front feminine Cleansing Buzzes Twice: Auto operation when user stands up. Intensity Adjustment – Adjust the pressure of the water through 4 different levels indicated by the LEDs next to the button. Buzzes Three or More Times: Indication of malfunction. Stop – Manually stop the rear wash, front wash or dryer function. (Automatically turns off after 2 minutes)

Position Adjustment – Adjust the position of the water jet of the front and rear washers Light Indicators whilst in use. Steps through 5 positions indicated by the LEDs next to the button. Power Indicator: Active when the bidet is powered on. Flashing during a malfunction. Dry – Activate the drier function. Dryer level can be adjusted with the intensity buttons during use. Seat Temperature Indicator: Active when the seat is heating. Flashing if the seat is over Nozzle Cleaning – Activate self-cleaning nozzle function. Only available when no one heated. is sitting on the toilet. Nozzle also automatically self-cleanse before front and rear wash functions. Water Temperature Indicator: Active when the water is heating. Flashing if the water is over heated. Deodorization – Turn on deodorization. Automatically activates when someone sits on the seat. Seat Indicator: Active when a user is seated. Flashing when water level is low. Water Temp. – Press the button and adjust the water temperature using the intensity buttons. Energy Saver Indicator: Active when the bidet enters energy saving mode. Seat Temp. – Press the button and adjust the seat temperature using the intensity buttons.

Lighting – Active the toilet light.

Energy Saving – Active power saving mode. Bidet enters power saving mode 1.5 minutes after the button is pressed.

10 11 Button Functions Buzzer Indicators

Rear Wash – Rear cleansing Buzzes Once: Receives instruction from controller.

Front Wash – Front feminine Cleansing Buzzes Twice: Auto operation when user stands up. Intensity Adjustment – Adjust the pressure of the water through 4 different levels indicated by the LEDs next to the button. Buzzes Three or More Times: Indication of malfunction. Stop – Manually stop the rear wash, front wash or dryer function. (Automatically turns off after 2 minutes)

Position Adjustment – Adjust the position of the water jet of the front and rear washers Light Indicators whilst in use. Steps through 5 positions indicated by the LEDs next to the button. Power Indicator: Active when the bidet is powered on. Flashing during a malfunction. Dry – Activate the drier function. Dryer level can be adjusted with the intensity buttons during use. Seat Temperature Indicator: Active when the seat is heating. Flashing if the seat is over Nozzle Cleaning – Activate self-cleaning nozzle function. Only available when no one heated. is sitting on the toilet. Nozzle also automatically self-cleanse before front and rear wash functions. Water Temperature Indicator: Active when the water is heating. Flashing if the water is over heated. Deodorization – Turn on deodorization. Automatically activates when someone sits on the seat. Seat Indicator: Active when a user is seated. Flashing when water level is low. Water Temp. – Press the button and adjust the water temperature using the intensity buttons. Energy Saver Indicator: Active when the bidet enters energy saving mode. Seat Temp. – Press the button and adjust the seat temperature using the intensity buttons.

Lighting – Active the toilet light.

Energy Saving – Active power saving mode. Bidet enters power saving mode 1.5 minutes after the button is pressed.

10 11 Cleaning and Maintenance

Do not use corrosive solvents to clean the outside of the toilet seat. Cleaning the Nozzles Do not use water to rinse any of the electrical equipment. Press the nozzle cleaning button so water sprays out. Press it again to extend the rear Pull out the plug before cleaning as a precaution. cleaning nozzle, press it once more to extend the front cleaning nozzle as well. Clean the toilet seat with a damp cloth. Clean the nozzles with a brush.

Daily Clean

Unplug the bidet from the power socket Turn off the water inlet valve. Grip the bidet and pull away from the fixing bracket to remove from the toilet. Cleaner the surface of the bidet and the toilet. Reinstall the bidet ensuring it fits the bracket correctly. Plug the bidet back into power and turn on the water again.

Replacing the Nozzles

Hold the front end of the nozzle tip and turn it counter clockwise so that it extends and pulls off. Replace it with a new nozzle and turn the nozzle tip clockwise.

12 13 Cleaning and Maintenance

Do not use corrosive solvents to clean the outside of the toilet seat. Cleaning the Nozzles Do not use water to rinse any of the electrical equipment. Press the nozzle cleaning button so water sprays out. Press it again to extend the rear Pull out the plug before cleaning as a precaution. cleaning nozzle, press it once more to extend the front cleaning nozzle as well. Clean the toilet seat with a damp cloth. Clean the nozzles with a brush.

Daily Clean

Unplug the bidet from the power socket Turn off the water inlet valve. Grip the bidet and pull away from the fixing bracket to remove from the toilet. Cleaner the surface of the bidet and the toilet. Reinstall the bidet ensuring it fits the bracket correctly. Plug the bidet back into power and turn on the water again.

Replacing the Nozzles

Hold the front end of the nozzle tip and turn it counter clockwise so that it extends and pulls off. Replace it with a new nozzle and turn the nozzle tip clockwise.

12 13 Specifications

Cleaning the Filter Rated voltage AC 220-240V, 50Hz The filter can be cleaned when the water pressure is too low or insufficient. 1520W (When intlet water temp is 15 degrees and the Close the shutoff valve of the water supply. Power consumption outlet temp and pressure is set to maximum.)

Power cord length 1.5m

Over-heating protection, water and electrical isolation, Safety devices Temp reset switch, over-dried protection.

Water pressure range

Water pressure adjustment

Cleansing outlet flow rates 0.5-0.9L per minute

Seat heater power 40W

Disassemble the T valve and remove the filter Seat surface temp 4 levels (33℃, 36℃, 39℃, Room Temp.)

Air dryer power 200W

Air temp. 4 paragraph adjustable:35℃，42℃，48℃，54℃

Deodorizer method Chemical absorption by deodorizer cartridge

Product size 508x444x159mm

Clean the filter with water and a brush. Do not use detergent to clean the filter.

Reinstall the filter and plumbing. Check all connections are secure and turn the water back on. User manual is subject to change without notice. For the latest version of your user manual, please visit https://www.kogan.com/usermanuals/

14 15 Specifications

Cleaning the Filter Rated voltage AC 220-240V, 50Hz The filter can be cleaned when the water pressure is too low or insufficient. 1520W (When intlet water temp is 15 degrees and the Close the shutoff valve of the water supply. Power consumption outlet temp and pressure is set to maximum.)

Power cord length 1.5m

Over-heating protection, water and electrical isolation, Safety devices Temp reset switch, over-dried protection.

Water pressure range

Water pressure adjustment

Cleansing outlet flow rates 0.5-0.9L per minute

Seat heater power 40W

Disassemble the T valve and remove the filter Seat surface temp 4 levels (33℃, 36℃, 39℃, Room Temp.)

Air dryer power 200W

Air temp. 4 paragraph adjustable:35℃，42℃，48℃，54℃

Deodorizer method Chemical absorption by deodorizer cartridge

Product size 508x444x159mm

Clean the filter with water and a brush. Do not use detergent to clean the filter.

Reinstall the filter and plumbing. Check all connections are secure and turn the water back on. User manual is subject to change without notice. For the latest version of your user manual, please visit https://www.kogan.com/usermanuals/

14 15