DOCSLIB.ORG

WASHLET Instruction Manual

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
WASHLET Instruction Manual Instruction Manual with Warranty TOTO U.S.A., Inc. 1155 Southern Road Morrow, GA 30260 Phone : (770) 282 8686 Warranty Registration and Inquiry WASHLET For product warranty registration, TOTO U.S.A. Inc. recommends On-Line Warranty Registration. Please visit our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please contact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295 - 8134 or (678) 466 - 1300 when calling from outside of U.S.A. SW584 type SW583 type SW574 type SW573 type ■ Thank you for your recent purchase of the TOTO Washlet. Please read the enclosed information to ensure the • You are advised to record the following information to allow quick service. safe use of your product. ■ Be sure to read this Instruction Manual before using your product and keep it in a safe place for future reference. Date of purchase : Name of shop : Date : year month day Tel : ( ) 2019.12.5 D07963 What functions are available on your product? Table of Contents Introduction The model name and part number are indicated Safety Precautions ..............................4 on the bottom side of the toilet lid. Operational Precautions ...................11 Cleaning Parts Names .......................................12 Preparation .........................................14 Basic Operations ...............................16 Support Automatic Functions (Convenience Operation Features) ............................................20 Sanitary Toilet Automatic Functions (Cleaning Features) ............................................22 Temperature Adjustment ..................24 Energy-Saver Features .....................26 The available functions vary according to the model. Power Plug .........................................30 Model WASHLET Main Unit ............................................31 Deodorizing Filter ..............................31 Ref. Maintenance Functions Part No. SW584 type SW574 type SW583 type SW573 type Page Gap between the Main Unit and the Toilet Bowl ..........................................32 Rear cleansing ● Gap between the Main Unit and the Soft rear cleansing ● Toilet Lid .............................................33 Cleaning Front cleansing ● Wand ...................................................34 Wide front cleansing ● Water Filter Drain Valve ....................35 Wand position adjustment ● Basic 16 Water pressure adjustment ● Functions Changing the washing method Oscillating cleansing ● Pulsating cleansing ● Personal setting lock ● Changing Settings .............................36 Drying Warm Air Drying ● What to Do? .......................................48 ● Changing the temperature Temperature Adjustment ● 24 If you cannot operate with the remote ............................................. Opening and closing the toilet control 48 ● —16 Opening and closing seat with remote control ●Freeze Damage Prevention ............49 Auto lid opening and closing ● — ●Long Periods of Disuse ...................50 Convenient 20 The self-cleaning functions operate automatically. Lighting up Soft light ● — Troubleshooting ................................51 Reference Functions (See pages 22 and 23 for details.) Heating the toilet seat Heated seat ● — SpeciÀ cations ....................................56 Timer energy-saver ● Warranty .............................................57 Saving energy 26 Auto energy-saver ● As you approach As you stand up As you move away Auto wand cleaning ● xA mist is sprayed in the xThe wand is cleaned x"ewater+" is sprayed Sanitary "ewater+" cleaning Auto bowl cleaning ● 22 toilet bowl to make it with "ewater+". in the toilet bowl to Functions more diႈ cult for dirt to (The wand extends and maintain cleanliness. Removing odors Deodorizer ● adhere. then retracts.) Main Unit xWhen you sit on ● 32 One-touch removal the toilet seat, the Maintenance deodorizer operates. Removable toilet lid ● 33 Wand cleaning ● 34 2 3 Safety Precautions Introduction potable 4 5 Safety Precautions (Continued) Introduction power * Except when using "Wand cleaning". power 35 6 7 Safety Precautions (Continued) Introduction (32°F) 49 8 9 Safety Precautions (Continued) Operational Precautions ■ For prevention of malfunctions ■ For prevention of damage Introduction ● Do not block the body sensor or the remote control ● Wipe plastic areas such as the main unit and remote Grounding Instructions transmitter or receiver. control with a soft, wet cloth. <About the Body Sensors> This product should be grounded. In the event of an electrical short circuit, grounding reduces Two types of body sensor are used. ● Body sensor A detects changes in heat. the risk of electric shock by providing an escape wire for the electrical current. xDetection may be diႈ cult when the room The plug must be plugged into an outlet that is properly installed and grounded. temperature exceeds 86 °F (30 °C), such as in the summertime. DANGER - Improper use of the grounding plug can result in a risk of electric shock. xWhen sunlight is directly on the sensor area or a ● Do not lean against the toilet lid. If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to heater is used in the bathroom, the sensor may ■ Problem Prevention detect incorrectly due to the heat, resulting in the either À at-head terminal. ● Disconnect the power plug if there is a risk of lightning. automatic operation of functions such as auto lid Check with a quali¿ ed electrician or serviceman if the grounding wire instructions are not ● A toilet seat cover or a toilet lid cover cannot be used. opening and closing. (The body sensor or seat switch may not function properly.) completely understood, or if in doubt as to whether the product is properly grounded. xWhen the bathroom door is open, the sensor may This product is factory equipped with a speci¿ c electric cord and plug to permit connection to detect people who pass to the front or side of the Cover toilet. a proper electric circuit. Make sure that the product is connected to an outlet having the same ● Body sensor B detects when someone stands in con¿ guration as the plug. front of the toilet bowl. xBody sensor B emits an infrared beam as shown No adapter should be used with this product. Do not modify the plug provided - if it will not ¿ t in ● Do not urinate on the main unit, toilet seat or wand. in the ¿ gure. When someone moves into the line of the outlet, have the proper outlet installed by a quali¿ ed electrician. (Doing so may cause pink or brown stains or a malfunction.) this infrared beam, the sensor detects the person. ● Do not apply strong forces to the control panel of the If the product must be reconnected for use on a diႇ erent type of electric circuit, the reconnection * Detection by the sensor may be diႈ cult when the remote control. should be made by quali¿ ed service personnel. toilet is used by someone small, such as a child. ● When using a toilet bowl cleaner to clean the toilet, Body sensor A Body sensor B wash it oႇ within 3 minutes and leave the toilet seat If it is necessary to use an extension cord, use only a three wire extension cord that has a three and toilet lid open. blade grounding plug, and a three-slot receptacle outlet that will accept the plug on the product. xWipe oႇ any cleaner that remains on the toilet bowl. (If vapor from a toilet bowl cleaner enters the main unit, Replace or repair a damaged cord. it may cause to a malfunction.) ● Do not expose to direct sunlight. (Doing so may cause temperature changes resulting <About the seat switch> in changes in color, irregular heated seat temperature, ● When you sit on the toilet seat, the seat switch a remote control malfunction, or a Washlet turns ON, enabling you to use various features. malfunction.) (A click sound is heard when the seat switch is ● Use radios, etc. away from the Washlet. ACTIVATED.) (The Washlet could cause interference with the radio signal.) ● If you use a booster seat for infants or a soft highchair, remove it after use. (Keeping it installed may prevent some of the functions Grounding pin Switch from being used.) ON Gap ● Do not apply force to the remote control. The toilet seat lowers. (May cause malfunctions.) Seat switch To prevent the hanger from being dropped, set it in the SAVE THESE INSTRUCTIONS (Built-in) remote control hanger when you are not using it. Be careful not to expose it to water. ● The seat switch will not turn on unless you sit on the seat properly. Note ● When a child uses the Washlet, the seat switch may not be ACTIVATED their light body weight. ● Since the toilet seat is designed to move up and down, a clearance is provided between the toilet seat cushion and the toilet bowl. 10 11 Parts Names Main display Right rear of main unit Right side of main unit Introduction POWER LED Toilet lid cushion Remote control receiver CLEAN indicator ENERGY SAVER LED Removal button SEAT LED Model name, Deodorizer vent Deodorizing filter part no., etc. Toilet lid Water supply hose Warm air dryer door Wand door Water supply valve Wand Seat switch (Built-in) Water drain lever Heated seat Power plug Toilet lid and toilet seat underside Power cord Toilet seat cushions Water filter drain valve Washlet control panel Body sensor A POWER ON/OFF button FRONT ON/OFF button Water filter REAR ON/OFF button drain valve Soft light Body sensor B (SW584 type, SW583 type only) (SW584 type, SW583 type only) Cover This button cannot be used. * Use in situations such as when the remote control batteries have discharged. 12 13 Preparation Using the Product for the First Time 1. Insert the battery. 2. Turn on the power. 3. Open the water supply valve. Introduction Remove the remote control Insert the power plug. Fully open the water supply 1 from the hanger. When the remote control is locked to 1 x The wand extends and then retracts. 1 valve. prevent theft Remove the screw from the 1 remote control ¿ xture. (Side view) Remote control Wall Check that the POWER LED Hanger Hanger on the main display is lit up. 2 x If the LED is not lit up, pressing [POWER ON/OFF] will light it up. Screw Open the battery cover and x If the POWER lamp À ickers, the main unit is Loosen not installed properly.
Load more

Recommended publications
  • Installation Instructions
    INSTALLATION INSTRUCTIONS BIDETS Electronic Bidet 99286A-N-0 Table of Contents Safety Instructions 2 ~ 6 Operational Instructions 7 Name of components 8 ~ 9 Accessories 9 use Before Precautions Installation Instructions 10 ~ 12 Grounding Instructions 13 If you are building a Things to be checked after installation Installation bathroom from scratch, 14 giving your bathroom a Installation makeover or just replacing an old tap, Englefield can How to Use Basic Features 15 provide a solution for you. How to Use Additional Features 16 ~ 19 Operation How to use to How How to take care of this Product 20 ~ 23 Prevention of Freezing 24 ~ 25 Flickering Warning Signals 25 Troubleshooting 26 Specification 27 Important Safeguards 28 Maintenance Care & Cleaning. Before you call for service for call you Before Cleaning. & Care 1243065-A02-A 29/02/2016 Englefield Safety Instructions Be sure to observe the following Be sure to read the following safety instructions carefully and use the product only as instructed in this manual to prevent bodily injuries and/or property damage which might happen while using this product. Failure to observe any of the Failure to observe any of the WARNING following might result in CAUTION following might result in minor critical injury or death. injury and/or product damage. Be sure to unplug the electric Strictly prohibited. power plug. Never disassemble or modify this Do not place in or drop into water. product. Proper grounding required to Things that have to be observed. Never use wet hands. *1 : Serious injury includes loss of eyesight, severe wound, burn (high, low temperature), electric shock, bone fracture, etc.
    [Show full text]
  • Doctor of Philosophy
    KWAME NKRUMAH UNIVERSITY OF SCIENCE AND TECHNOLOGY KUMASI, GHANA Optimizing Vermitechnology for the Treatment of Blackwater: A Case of the Biofil Toilet Technology By OWUSU, Peter Antwi (BSc. Civil Eng., MSc. Water supply and Environmental Sanitation) A Thesis Submitted to the Department of Civil Engineering, College of Engineering in Partial Fulfilment of the Requirements for the Degree of Doctor of Philosophy October, 2017 DECLARATION I hereby declare that this submission is my own work towards the PhD and that, to the best of my knowledge, it contains no material previously published by another person nor material which has been accepted for the award of any other degree of any university, except where due acknowledgement has been made in the text. OWUSU Peter Antwi ………………….. ……………. (PG 8372212) Signature Date Certified by: Dr. Richard Buamah …………………. .................... (Supervisor) Signature Date Dr. Helen M. K. Essandoh (Mrs) …………………. .................... (Supervisor) Signature Date Prof. Esi Awuah (Mrs) …………………. .................... (Supervisor) Signature Date Prof. Samuel Odai …………………. .................... (Head of Department) Signature Date i ABSTRACT Human excreta management in urban settings is becoming a serious public health burden. This thesis used a vermi-based treatment system; “Biofil Toilet Technology (BTT)” for the treatment of faecal matter. The BTT has an average household size of 0.65 cum; a granite porous filter composite for solid-liquid separation; coconut fibre as a bulking material and worms “Eudrilus eugeniae”
    [Show full text]
  • USER GUIDE Electronic Bidet Seat
    USER GUIDE Electronic Bidet Seat BEYOND TECHNOLOGY Powered by TOTO Functions Functions Rearwash Cleanse Rear soft cleanse Ladywash Nozzle position adjustment Water volume Basic Changing the washing Functions Oscillating comfort wash method Pulsating wash User setting Drying Air dryer Changing the temperature Temperature adjustment Sanitary Removing odors Functions $LUSXUL¿HU Remote controlled seat and lid Opening and closing Automatic open / close (seat and lid) Convenient Lighting up Night light Functions Heating the toilet seat Heated seat Timer energy saver Energy saving Auto energy saver Removable toilet lid Maintenance Nozzle cleaning 2 Table of Contents Safety Precautions .................... 4 Operational Precautions ........... 10 Parts Names ............................. 12 Preparation ............................... 14 Introduction Model name Basic Operations ...................... 16 Part No. Automatic Functions ................. 20 $LUSXUL¿HUDXWRRSHQFORVH night light ............................... 20 Temperature adjustment ........... 22 Operation Energy Saver Features ............. 24 Power Plug / Main unit .............. 28 Gap between the Main Unit and the Toilet Lid ...................... 30 Deodorizing Filter ..................... 31 Nozzle cleaning ........................ 32 :DWHU¿OWHUGUDLQYDOYH 33 Maintenance Changing Settings .................... 34 What to Do?............................... 46 Ɣ,I\RXFDQQRWRSHUDWHZLWK the remote control .................. 46 Ɣ)UHH]H'DPDJH3UHYHQWLRQ 47 Ɣ/RQJ3HULRGVRI'LVXVH 48 Troubleshooting
    [Show full text]
  • Roval™ Surface Mounted Seat Cover Dispenser
    AMERICAN SPECIALTIES, INC. MODEL №: 20477-SM 441 Saw Mill River Road, NY 10701 (914) 476-9000 www.americanspecialties.com ISSUED: 08/09 REVISED: ROVAL™ SURFACE MOUNTED SEAT COVER DISPENSER 3 15- 4" [400] 3 2- 8" [60] TOP VIEW MOUNTING HOLES 5 12- 8" [320] 1 3- 2" [89] 1 3- 8" [80] 11" [280] 11 1 8- 16" [220] 7- 2" NOTE: [191] ALL DIMS INCH [MM] FRONT VIEW SPECIFICATION Roval™ Collection Surface Mounted Seat Cover Dispenser shall hold and dispense 250 standard single or half-fold paper toilet seat covers contained in supply box. Cabinet full panel shall be drawn seamless and shall have bowed front face and gently radiused edges to provide added strength and complimentary appearance for modern wash- room aesthetics. Unit shall be 22 gauge type 304 stainless steel alloy 18-8 and all exposed surfaces shall have satin finish protected during shipment with PVC film that is easily removable after installation. Cover dispensing slot shall have a fully deburred flat edge for snag-free dispensing and user safety. Structural assembly of cover and mounting bar components shall be of welded construction with no visible spot-welded seams or fasteners. Roval™ Collection Surface Mounted Toilet Seat Cover Dispenser shall be Model № 20477SM of American Specialties, Inc. 441 Saw Mill River Road Yonkers, New York 10701-4913 INSTALLATION Mount unit on wall or partition surface using two (2) № 10 x 1-1/4" (32) self-tapping flat head screws (by others). Mounting holes are clearly accessible through dispenser slot for installation and concealed behind dispenser box for vandal resistant locking after dispense product is loaded.
    [Show full text]
  • Wild Swans Three Daughters of China Jung Chang
    Wild Swans Three daughters of China Jung Chang Flamingo An Imprint of HarperCollins Publish 77-85 Fulham Palace Road, Hammersmith, London W6 8JB Special overseas edition 1992 This paperback edition 1993 59 58 57 56 55 54 53 First published in Great Britain by HarperCollins Publish 1991 Copyright © Glohalflair Ltd 1991 ISBN 0 00 637492 1 Printed and bound in Great Britain by Clays Ltd, St. Ives plc All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the publishers. This book is sold subject to the condition that it shall not, by way of trade or otherwise, be lent, re-sold, hired out or otherwise circulated without the publisher's prior consent in any form of binding or cover other than that in which it is published and without a similar condition including this condition being imposed on the subsequent purchaser. To my grandmother and my father who did not live to see this book AUTHOR'S NOTE My name "Jung' is pronounced "Yung." The names of members of my family and public figures are real, and are spelled in the way by which they are usually known. Other personal names are disguised. Two difficult phonetic symbols: X and Q are pronounced, respectively, as shand chIn order to describe their functions accurately, I have translated the names of some Chinese organizations differently from the Chinese official versions. I use 'the Department of Public Affairs' rather than 'the Department of Propaganda' for xuan-chuan-bu, and 'the Cultural Revolution Authority' rather than 'the Cultural Revolution Group' for zhong-yang- well-ge.
    [Show full text]
  • Designing the Next Generation of Sanitation Businesses
    DESIGNING THE NEXT GENERATION OF SANITATION BUSINESSES A REPORT BY HYSTRA FOR THE TOILET BOARD COALITION - SEPTEMBER 2014 SPONSORED BY Authors Contributors Jessica Graf, Hystra Network Partner Heiko Gebauer, Eawag Olivier Kayser, Hystra Managing Director Lucie Klarsfeld, Hystra Project Manager Simon Brossard, Hystra Consultant Mathilde Moine, Hystra Junior Consultant To download this Report, visit www.hystra.com For more information on this project, please contact: [email protected] About Hystra Hystra is a global consulting firm that works with business and social sector pioneers to design and implement hybrid strategies, i.e. innovative market-like approaches that are economically sustainable, scalable and eradicate social and environmental problems, and combine the insights and resources of for-profit and not-for-profit sectors. For more information, visit www.hystra.com ACKNOWLEDGEMENTS The authors of this Report would like to thank the Sponsors that made this work possible. Integrating their different perspectives has been critical in shaping meaningful recommendations for the sector. We also want to thank the social entrepreneurs who shared Nageshwara Charitable Trust (NCT), Sanishop India, their innovative work, and the experts who contributed eKutir: Rita Bhoyar, Mukund Dhok, HMB Murthy insights over the course of this study. Your support and (Nageshwara Charitable Trust), R. Subramaniam Iyer, commitment are deeply appreciated. Sundeep Vira (WTO), KC Mishra (eKutir), Tripti Naswa (Sattva) In addition, the authors would like to acknowledge that the SOIL/Re.source: Sasha Kramer, Leah Page work presented in the Report builds on the research work WaterSHED: Phav Daroath, Aun Hengly, Lyn Mclennan, undertaken by the Toilet Board Coalition, a global business- Geoff Revell led alliance that aims to promote market-based solutions X-Runner: Jessica Altenburger, Isabel Medem to sanitation and bring them to scale.
    [Show full text]
  • WASHLET Instruction Manual
    Instruction Manual with Warranty TOTO U.S.A., Inc. 1155 Southern Road Morrow, GA 30260 Phone : (770) 282 8686 Warranty Registration and Inquiry WASHLET For product warranty registration, TOTO U.S.A. Inc. recommends On-Line Warranty Registration. Please visit our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please contact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295 - 8134 or (678) 466 - 1300 when calling from outside of U.S.A. TOTO ASIA OCEANIA 10, Eunos Road 8, #12-07, Singapore Post Centre. Singapore 408600. PTE. LTD. Phone : +65-6744-6955 Fax : +65-6841-0819 http://asia.toto.com/ TOTO ASIA OCEANIA Middle East Branch LOB19-1701-1702, Jebel Ali Free Zone, P.O. box 261804, Dubai U.A.E. PTE. LTD. Phone : +971-4-886-5983 Fax : +971-4-886-5986 http://asia.toto.com/ TOTO ASIA OCEANIA Manila Representative Office. Unit 1010, 10th Floor Rufino Building, Ayala Avenue cor.V.A. S350e SW584 (TCF4731U) PTE. LTD. Rufina Street, Makati City,1226 Philippines. SW583 (TCF4730U) Phone : +63-2-887-6643 Fax : +63-2-887-4084 http://asia.toto.com/ S300e SW574 (TCF4721U) SW573 (TCF4720U) TOTO LTD. Bangkok Representative Office G Floor, Q.House Ploenjit Building, 598 Ploenchit Road, Lumpini, Pathumwan, Bangkok 10330 Thailand http://www.totobkk.com TOTO INDIA INDUSTRIES Head office 506, 5th Floor, ASCOT Center, Sahar Airport Road, PVT. LTD Andheri (East) Mumbai 400099, Maharashtra, India. Phone : +91-22-2832-5741/5742 Fax : +91-22-6725-8780 http://asia.toto.com/ TOTO INDIA INDUSTRIES Delhi Branch 909-909A, 9th Floor, Block-E, International Trade Tower, PVT.
    [Show full text]
  • PE810 Stool Test
    Stool Test Tips for collecting a stool sample How can I prepare Many older children do not like the idea of giving a sample of their stool my child? (poop) for testing, even if they can do it in their own bathroom. Talk to your child about the steps using simple, honest words. Show them you understand by saying something like “I know this may be embarrassing for you. It can be awkward for grownups too, but we need to do this because…” This will allow your child to express their feelings and accept your help. How do I collect a It is important that no urine or toilet water mix with the stool sample. These stool sample? can interfere with testing. Please use the collection container given to you. Do not use jars or containers from home. They have detergents in them that can change the results of your child’s tests. Follow these There are two ways to collect a stool sample. directions for Line the inside of the diaper with plastic wrap children in diapers: (see picture) OR use the collection bag given to you by clinic or the lab. This will keep the stool sample from being absorbed into the diaper. If you use the plastic wrap lining: Use the wooden stick given to you to transfer the stool from the plastic wrap into the container provided . If you use a collection bag: 1. You will need to place the opening of the bag over your baby’s anus (the hole where the stool comes out).
    [Show full text]
  • Compendium of Sanitation Technologies in Emergencies
    Compendium 1st Edition of Sanitation Technologies in Emergencies Compendium 1st Edition of Sanitation Technologies in Emergencies Robert Gensch (GTO), Amy Jennings (BORDA), Samuel Renggli (Eawag), Philippe Reymond (Eawag) We would like to thank the following individuals and their organisations/institutions for their invaluable contributions to this publication: Djilali Abdelghafour, Nienke Andriessen, Leonellha Barreto-Dillon, Andy Bastable, Magdalena Bäuerl, Benjamin Bernan- dino, Damian Blanc, Franck Bouvet, Patrick Bracken, Chris Buckley, Marc-Andre Bünzli, Chris Canaday, Daniel Clauss, Benjamin Dard, Malcolm Dickson, Paul Donahue, Georg Ecker, Miriam Englund, Marta Fernández Cortés, Suzanne Ferron, Claire Furlong, Sergio Gelli, Feline Gerstenberg, Moritz Gold, Celia González Otálora, Peter Harvey, Oliver Hoffmann, Tineke Hooijmans, Andrews Jacobs, Heidi Johnston, Christopher Kellner, Anthony Kilbride, Sasha Kramer, Jenny Lamb, Günther Langergraber, Anne Lloyd, Andreas Ludwig, Christoph Lüthi, Saskia Machel, Grover Mamani, Adeline Mertenat, Mona Mijthab, Alexander Miller, Patrice Moix, Paolo Monaco, Bella Monse, Hans-Joachim Mosler, Burt Murray, Arne Pane sar, Thilo Panzerbieter, Jonathan Parkinson, Dominique Porteaud, Nick Preneta, Torsten Reckerzügl, Bob Reed, Stefan Reuter, Romain Revol, Nina Röttgers, Johannes Rück, Vasco Schelbert, Jan-Christoph Schlenk, Jan-Hendrik Schmidt, Stephanie Schramm, Jan Spit, Haakon Spriewald, Steve Sugden, Annkatrin Tempel, Elisabeth Tilley, Erika Trabucco, Tobias Ulbrich, Lukas Ulrich, Claudio Valsangiacomo,
    [Show full text]
  • Smart Toilet Seat Manual
    Smart toilet seat Manual The Product Model: Contents Overall sketch 1 Safety precautions 2 Function introduction 4 Thanks for choosing our product. Installation guide 5 And please read the instructions carefully before properly using. Use Control panel introduction 9 Preparation before use 9 Product use 10 Cleaning and maintenance 16 Appendix Product specification 19 Packing list 20 Overall sketch Safety Precautions All the safety precautions listed can prevent the users from the physical hurts or property losses. Please read all the safety items and warnings, using the product in the right way. Cushion pad WARNING Ignoring the sign may lead to serious injury or death. Toilet lid Damper Don’t disassemble, repair, Don’t immerse the product into alter the product. the water. If the operating Environment has a quite high Warm air dryer humidity, please install scavenging port and seal the attaching Control panel All the behaviors above may plug with rubber. lead to fire or electric shock. Deodorizing box(inside) The product needs to be repaired professionals. Nozzle for rear wash Nozzle for front wash Seat Don’t touch the plug with the Connect the grounding wire Seated-sensor switch wet hand. with the product to prevent electric leakage or electric shock. It may lead to If the grounding wire is PE inter not connected with the electric shock. product, it may lead to electric leakage or shock. The grounding wire needs to be Mounting bolts Rubber sleeves connected with the product by a T valve professional. Gasket Remote control Remote bracket Metal gasketX2 Don’t power on before pouring Don’t use the loosening plug.
    [Show full text]
  • TIGER WORM TOILETS Design Manual
    TIGER WORM TOILETS Design Manual 1 Tiger Worm Toilet: Design CONTENTS 03 Introduction to Tiger worm toilet design 04 Toilet design factors 07 Determining which TWT design is the right one for your situation. 08 Different TWT designs Design 1 - Direct Drop Pour Flush TWT 11 16 Design 2 - Raised Direct Drop pour Flush TWT Design 3 - Offset Pour Flush TWT 18 Design 4 - Raised Offset Pour Flush TWT 19 Design 5 - Raised Offset Pour Flush TWT 21 Design 6 - Direct Drop Pour Flush TWT 27 28 Design 7 - Offset pour Flush TWT 30 Acknowledgements 31 References and Further Reading 2 Tiger Worm Toilet: Design Introduction to Tiger worm toilet design. This part of the manual will go through the tiger worm toilet design factors. It will look at the key technical elements of the toilet and how it differs from other latrines. Then there is a section emphasising the importance of high quality of construction. The infiltration capacity of the soil is key in determining if the ground conditions are suitable for tiger worm toilets, how to calculate this is gone through in detail. The minimum infiltration capacity of the soil then determines if a subsurface pit can be excavated. Other important design factors which are looked at are the number of users per toilet, the quantity of worms per toilet and the surface area of the pit which all impact on the design. There is then a section on determining which is the right tiger worm toilet for your situation including a table showing the advantages and disadvantaged of different designs.
    [Show full text]
  • Kingston™ Ultra Rear Spud Flushometer Bowl K-84323-L Features • Elongated Bowl
    Kingston™ Ultra Rear spud flushometer bowl K-84323-L Features · Elongated bowl. · Siphon jet. · 1.1 gpf (4.2 lpf), 1.28 (4.8 lpf) or 1.6 gpf (6.0 lpf) depending on flushometer specified. · 11" (279 mm) x 8-1/4" (210 mm) water surface. · Includes bedpan lugs. · 1-1/2" (38 mm) rear spud. Material · Vitreous china. Technology · Improved flush for toilet seat cover removal. · Re-engineered for strong flush performance in buildings with lower water pressure or flow. · New cast-on putty plate resists breakage. · New design eliminates gas leaks, splashing and paper shredding. CSA B651 OBC Codes/Standards Installation ASME A112.19.2/CSA B45.1 · Wall-mount. DOE - Energy Policy Act 1992 · This product replaces K-4323-L. EPA WaterSense® Recommended Products/Accessories California Energy Commission (CEC) K-23726 Drain treatment ADA K-23724 Toilet cleaner & disinfectant ICC/ANSI A117.1 K-23734 Toilet bowl cleaner & disinfectant CSA B651 OBC KOHLER® One-Year Limited Warranty See website for detailed warranty information. Available Colors/Finishes Color tiles intended for reference only. Color Code Description 0 White 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com. 9-3-2020 00:12 - US/CA Kingston™ Ultra Rear spud flushometer bowl K-84323-L For Back-to-Back Toilet Installations Use a 45° double Do not use a wye fitting. double sanitary tee. 1/16" 15-9/16" (2 mm) (395 mm) 25-13/16" (656 mm) 9" (229 mm) 1-1/2" Spud 3-11/16" (94 mm) 2-1/2" (64 mm) 11-1/2" (292 mm) 7-1/2" 13-1/4" 15" (191 mm) (337 mm) (381 mm) 5" 5" (127 mm) CL of Outlet (127 mm) 1-3/4" (44 mm) Technical Information Notes All product dimensions are nominal.
    [Show full text]