DOCSLIB.ORG

Project #2014-13 AUDIO VISUAL UPGRADE PROJECT SPECIFICATIONS

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Project #2014-13 AUDIO VISUAL UPGRADE PROJECT SPECIFICATIONS Project #2014-13 AUDIO VISUAL UPGRADE PROJECT SPECIFICATIONS (Dated: September 19, 2014) Village of Irvington 85 Main Street Irvington, NY 10533 Tel: (914) 591-4356 Fax: (914) 591-4072 Web Site: WWW.IRVINGTONNY.GOV September 19, 2014 Audio Visual Upgrade Project Contract No. 2014-13 DIVISION #0: BIDDING AND CONTRACT REQUIREMENTS SECTION #AB: NOTICE TO BIDDERS VILLAGE OF IRVINGTON AUDIO VISUAL UPGRADE PROJECT WESTCHESTER COUNTY NEW YORK CONTRACT NO 2014-13 A. NOTICE TO BIDDERS 1. Bids will be received by the Village Clerk of Irvington until 11:00 a.m. on October 29, 2014 at the Village Hall, 85 Main Street, Irvington, New York 10533 for Contract No. 2014-13. Sealed bids can be mailed or delivered to Brenda Jeselnik, Clerk/Treasurer for receipt on or before the bid date/time. 2 Attention of bidders is called to the requirements as to conditions of employment to be observed and minimum wage rates to be paid under the contract. The bidder to whom a contract is awarded will not be required to furnish performance or payment bonds. 3 Plans, specifications and all information relative thereto may be secured at the Irvington Village Hall, Administrator’s Office, 85 Main St, Irvington, NY on online at www.irvingtonny.gov. The Village will not be responsible for full or partial sets of contract documents, including any addenda obtained from any other source. The Board of Trustees reserves the right to waive any formalities and to reject any or all bids. Village of Irvington Brenda M. Jeselnik Clerk/Treasurer September 19, 2014 Audio Visual Upgrade Project Contract No. 2014-13 DIVISION #0: BIDDING AND CONTRACT REQUIREMENTS SECTION #IB: INSTRUCTIONS TO BIDDERS 1. The Owner, The Village of Irvington invites bids for the Audio Visual Upgrade Project as described in the accompanying Contract Documents. 2. Sealed bids must be submitted in accordance with the Notice to Bidders 3. All bids shall be submitted on the Bid Form provided or equivalent. 4. The bidder agrees to commence work within 7 days of execution of contract or receipt of a Notice to Proceed or Letter of Intent and must complete the work within 6 months of the commencement date. 5. The Owner reserves the right to reject any or all bids and to waive any informalities in the bidding if it be in the Owner's interest to do so. 6. Purchases of any materials shown in these specifications to be used on the project are entitled to exemption from the sales and use tax. Bidders are instructed to submit proposal on the basis that no sales or use taxes will be imposed on purchases of any materials used in connection with the project. 7. The successful bidders shall be required to maintain and submit certificate for such insurance as specified. 8. All questions about these specifications must be directed to Lawrence Schopfer, 85 Main St., Irvington, NY 10533 or (914) 591-4358 or [email protected]. September 19, 2014 Audio Visual Upgrade Project Contract No. 2014-13 DO NOT REMOVE THIS FORM FROM THIS CONTRACT MANUAL BID FORM PROJECT: Audio Visual Upgrade Project DATED _________________ (A corporation of, organized & existing under the law of, the State of ) (A partnership consisting of ______________________________________) (A individual trading as ____________________________ ) City of_________________________________________ in the State of_________________________________________ hereby submits our BID for Audio Visual Upgrade Project and agrees that if this bid is accepted as hereinafter provided, he/she will, except to the extent otherwise specifically provided in the Contract Documents, furnish all labor, materials, supplies, tools, plant and equipment necessary to perform all work described in the Contract referred to in Instructions to Bidders in strict accordance with the terms and provisions of this Contract consisting of the documents listed in the Index to Specifications of the Project Manual of the Contract Documents, which are made a part hereof of the construction on the aforementioned project in accordance with these drawings and specifications for the following BREAKDOWN OF COSTS {see next page} September 19, 2014 Audio Visual Upgrade Project Contract No. 2014-13 PLEASE ENTER SEPARATE BIDS FOR EACH LOCATION AS SHOWN IN THE CONTRACT DOCUMENTS. THE VILLAGE MAY AWARD A CONTRACT FOR ONE OR MORE OF THESE LOCATIONS BUT WILL ONLY AWARD ONE CONTRACT TO ONE CONTRACTOR. PLEASE USE THE FOLLOWING EQUIPMENT LIST PAGES FOR PRICING PURPOSES. CARRY EACH LOCATION TOTAL FROM THOSE EQUIPMENT LISTS TO THIS BID FORM. Bid (location) – Town Hall Lump Sum: DOLLARS ($ ) Bid (location) – Library Lump Sum: DOLLARS ($ ) Bid (location) – Senior Center Lump Sum: DOLLARS ($ ) Bid (location) – Recreation Center Lump Sum: DOLLARS ($ ) Contractor Date Irvington Village Equipment - 5-28-14.xls Page 1 of 10 Townhall EQUIPMENT LIST: QTY UNIT COST EXTENSION Meeting room OFE system OFE Aux plate (Composite/Aud L/R) 1 OFE JBL26CT Ceiling Speaker 6 OFE QSC ISA300TI 1 OFE Biamp Audia Solo (12x4) 1 OFE Shure SLX4-J3 with SM58 Wireless handheld mic 2 OFE Table top gooseneck mic with XLR input plate at table 6 OFE Panasonic SVS/VCR PV-D4744A 1 OFE Projector 1 OFE PC 1 OFE 26space rack 1 OFE Middle Atlantic PD915R 1 Note: NO control system at meeting room 1 Townhall rack room OFE system OFE Comprehensive 1x4 composite V with audio DA 1 OFE Prinston Server (Streaming/Recording) composite video, stereo audio I/O 1 OFE Granicus Webcaster composite video, stereo audio I/O 1 OFE Verizon modulator for broadcating to CH40 composite video, stereo audio I/O 1 OFE Cable Vision modulator for broadcasting to CH75 composite video, stereo audio I/O 1 OFE RSH 4x4 AV switcher composite video, stereo audio I/O Controlled by Princeton server 1 Take all source to Matrix mixer Provide output to **RSH router (In1-Prinston server out(Pre-recorded contents). In 2-Bulleting board by Magic box. in3-camera feed(Program) In 4- DVD **Cable Vision **Verizon **Granicus Webcaster Video System DELL PC Laptop/PC for Marshall VMS-16(free) Network Video Management Software 1 NEC EA244WMi-BK Widescreen LED-Backlit Desktop Monitor w/ IPS Panel 1 Marshall VS-574 1.3 MP 1/3" Progressive Scan CCD 28x Vandal Proof IP Speed Dome Camera with Composite (Optional Bracket Required) 3 Marshall VS-B570-C Ceiling Mount Bracket (For Indoor and Outdoor use) 3 Marshall VS-11 D1 Resolution Dual Stream Encoder / Decoder with Duplex Audio and PoE - Replacement for VS-100 14 Marshall VS-TRM-200 Rack mount holder for 16 pcs of VS-11 1 Irvington Village Equipment - 5-28-14.xls Page 2 of 10 Townhall Marshall VS-14 4 Channel D-1 Resolution Dual Stream Encoder with Duplex Audio and PoE 1 Marshall VS-TKC-100 PTZ Keyboard Controller 1 Marshall VMS-16(free) Network Video Management Software 1 Analog way Quattro Value - QXE421 HD Seamless Switcher for Houses of Worship, Conference Rooms and Large Screen Projections 1 Extron VSC 500 Scan Converter 60-476-01 2 Extron DA 6AV EQ 1x6 w/Audio 60-692-21 1 Extron MDA 3AV 1x3 Composite with Stereo Audio 60-439-20 1 Extron RSB 123 1U 3.5" Deep Basic Rack Shelf, Gray 60-604-21 1 Extron RSB 126 1U 6" Deep Basic Rack Shelf, Gray 60-604-11 2 Middle Atlantic MS-5.5 Shelf Pack, 4 Pieces 2 Monitor System Marshall V-R35P (3RU) 3.5" ten LCD screen Rack Mountable Panel with Composite inputs and auto NTSC/PAL detection 1 Marshall V-R44P (2RU) Four 4" Rack Mounted Full Color Active Matrix LCD Panels 1 Marshall M-LYNX-702 (3RU) Dual 7” rack mount monitor w/ HDMI, HDSDI, Composite, Component 2 Marshall AR-DM21-B 16 Channel Digital Audio Monitor – 1RU Mainframe with Tri-Color LED Bar Graphs 1 Marshall ARDM-AA-8XLR 8 Balanced Analog Audio Inputs (DB-25) Nominal level: 0,+4,+6, or+8 dBu = -20dBFs Break-Out Cable included (DB-25 to XLR) 2 Extron SMX System MultiMatrix SMX 300 Frame 3U/6-Slot 60-855-01 1 Extron SMX 1616 V 16x16 Composite Video; 2 Slots 70-591-04 1 Extron SMX 88 V 8x8 Composite Video; 1 Slot 70-591-03 1 Extron SMX 1616 A 16x16 Stereo Audio; 2 Slots 70-599-04 1 Extron SMX 88 A 8x8 Stereo Audio; 1 Slot 70-599-03 1 Audio system CLEARONE Converge Pro 880 - 8 channel AEC microphone mixer RoHS 910-151-880 1 Clearone White Ceiling Microphone Array kit 910-001-013-W for CONVERGE Pro and INTERACT Pro (includes RJ45 receptacle to Mini-Phoenix mixer adapter) 2 Clearone Beamforming Mic Array (24 mic elements per array - replaces 10 traditional microphone) 910-001-003 1 Clearone PoE Power supply & Cables kit for Beamforming Microphone Array 910-001-004 1 Irvington Village Equipment - 5-28-14.xls Page 3 of 10 Townhall Clearone Ceiling Mounting Kit with 24" spanner for Beamforming Microphone Array 910-001-005-24 1 Atlas Sound AT100D Speaker Attenuator, 100w 70v, White / Ivory 1 Denon DN-700R Network SD and USB Recorder 1 Transcend TS32GSDHC10 SDHC Card - 32GB, Class 10 1 Video/Control system AMX NI-3100 NetLinx® Integrated Controller:7RS232,8Relay,8IR,8IO,Axlink,Lan Part #FG2105-05 2 AMX PSN4.4 13.5 VDC, 4.4 A Power Supply with 3.5 mm Phoenix Connector Part #FG423-45 2 AMX MXA-MPL Modero X® and Modero S Series Multi Preview Live Part #FG5968-10 1 AMX MST-1001 10.1" Modero S Series Tabletop Touch Panel DescriptionMST-1001, Tabletop Touch PanelPart #FG2265-05 1 Cisco SG 300-10P (SRW2008P-K9-NA) 10-Port Gigabit PoE Managed Switch 1 Cisco SG300-28P 28-port Gigabit PoE Managed Switch (SRW2024P-K9-NA) 1 Rack/Power system Middle Atlantic RK Series Rack, RK12 1 Middle Atlantic RK-RR12 16SP RAIL KIT RK/BRK 1 Middle Atlantic Slim 2 Series Rack, 2-10 2 Middle Atlantic PD1815R-NC 18OUT 15A,RKMT 2-STG SRG 2 Cable/Connector Extron MVGA M-M/6 6' (1.8 m) 26-567-02
Load more

Recommended publications
  • Manufacturing and Supply of Professional Broadcast Equipment
    Manufacturing and Supply of Professional Broadcast Equipment For more than 40 years PERCON has been devoted to the design, manufacturing and marketing of professional cabling solutions for the Broadcast and multimedia fields. Our team is composed of over 40 technical, sales and logistics specialists that guarantee the best customer service and technical support and offer an impressive range of top-quality products to meet any project’s needs. In accordance to our customer-oriented strategy that has led us to constantly increase our products portfolio, PERCON’s renowned European audio, video, control, fiber and all type of multicore cables and assemblies are now accompanied by multiple related articles such as cable testers, connectors, tools, reels, etc. This catalogue encompasses all the items that make PERCON a one-stop shop for the broadcast and system integrations people. We thank you for the trust you have placed on us and that has situated PERCON as a key supplier in the international broadcast industry. German Permanyer Domènec Permanyer Permanyer Brothers. Old haberdashery, 1969. Quirze Permanyer The beginning PERCON’s origins date back to Mr Quirze Permanyer, whose enterprising spirit and ambition led him to start repairing radios and record players in the 1940s. Radios at the time were complicated and knowing how to repair them demanded being up to date with the “new technologies”, something that is still essential nowadays in PERCON’s policy. Over time, besides repairs, customers started ordering some customised cables for those devices and he realised that the cables were generating even more interest than the repairs themselves, so he started to focus his attention in supplying tailored assemblies.
    [Show full text]
  • B403 20120316 AVP Universal Bulkhead.Cdr
    Insulated Bulkhead Modular Bulkhead Universal Bulkhead Panel System • Design your own bulkhead • Extensive selection of connector modules • 1RU, 2RU & 3RU, 16 & 12 position available • Strain relief cable bar is standard Model WK-U216E2-Z with optional Connector Kits Model WK-U116E1-Z 2RU version shown above Model WK-U212E2-Z Model WK-U112E1-Z 2 RU 2 RU Side View Optional 1 RU 1 RU Side View Standard Cable Bar -3BAR Optional supplied with panel Cable Bar Standard Cable Bar -3BAR supplied with panel Cable Bar 6.00” [152.40mm] 3.179” [80.75mm] 6.00” [152.40mm] 3.179” [80.75mm] Full List of Universal Connector Kits on the Rear toll free: 1-800-481-2493 USA & Canada tel: 519-740-7966 • fax: 519-740-0131 • email: [email protected] B403 20120316 Universal Insulated Bulkhead Connector Kits Universal Connector Kits Ordering Information Model Description Universal Panel - Panel with Cable Bar Only; no Connectors, no Adaptor Plates, no Cover Plates WK-U216E3-Z 3RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U216E2-Z 2RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U116E1-Z 1RU, 1x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U212E3-Z 3RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors URJ45-5E UNAHDMI-W-B WK-U212E2-Z 2RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U112E1-Z 1RU, 1x12 Universal Panel, Panel & Cable Bar Only, No Connectors UNY330 Add -3BAR 3” [80.75mm] Cable Bar instead of standard 6.0”[152.40mm] Cable Bar BUILD3 3 RU Assembly of connectors to
    [Show full text]
  • Edu09 Tabloid.Pdf
    WIRED MICROPHONES – EDUCATION SUPPLEMENT 3 NEW! ASTATIC 1600VP CONTINUOUSLY-VARIABLE PATTERN EARTHWORKS FLEXWAND™ HIGH DEFINITION MIC, BOOM AND CONDENSER HANGING MIC SYSTEM This mic system has a STAND COMBO Combines a 30kHz high-definition microphone, a low- continuously-variable polar pattern controllable from a remote loca- CROWN PCC-160/PCC-160W Surface-mounted, profile mic stand and boom into a single unit. It allows the microphone head tion. Its remote box is rackmountable (up to 6 units per shelf), supercardioid condenser mi c in tend ed for stage floors, lec- to be positioned as high as 7ft and as low as 1.5ft from the floor or anywhere features a LED status indicator, has a selectable recessed terns, conference tables, and news desks. Features excellent gain-before- between, and there are no visible cables above floor level. Also available in (80Hz, 12dB/octave) hi-pass filter, is RF resistant, and has feed back, room noise and rear sound rejection. Sur face mount ing results white – substitute "W" for "B" in the model number. securable controls. It includes a 30' cable, wall plate, in a “half-supercardioid” polar pat tern with in creased di rec tiv i ty and sen si- ITEM DESCRIPTION LIST articulating steel hanger and all accessories for hang- tiv i ty. The low pro file and black fin ish make the PCC160 al most in vis i ble in FW730/C-B ............... Cardioid, black ..........................................................1595.00 ing the microphone. The large diameter, low-noise most ap pli ca tions. The PCC160W is a white ver sion. Phantom power only.
    [Show full text]
  • AVP MFG & Supply Inc
    Mosaic Jackfield Systems Years Since 1985 AVP MFG & Supply Inc. v1.1 AMS25 Mosaic AMS25 AVP Mosaic audio and video patching components provide exceptional functionality and circuit identification standards to simplify system design, installation, operation and maintenance. Key Mosaic Features: • CIS (Circuit Identification System) allows color-coding of every circuit to visually identify each circuit by color • Patented designation design maximizes viewable area • Numbered jack positions for quick and accurate installation, system troubleshooting and operational ease • Front-mount jacks simplify system re-design and maintenance AVP suggests the use of the following color code to indicate various normaling options in Mosaic jackfields and patchbays. You are not limited to this color coding, as indicators are available in 10 colors. Our customers have found they are able to quickly determine the operation of each circuit by using the following standard: Red: Full Normals: Red coding is used for ‘full normals’ (normals strapped) to designate STOP and be sure of your action because patching a full normalled jack will cause you to lose a circuit. Yellow: Half Normals (audio): Yellow coding signifies patching into ‘half normaled’ positions, and CAUTIONS that patching the input (bottom jack) will break the path, while it is safe to patch into the top (output) without breaking the path. Green: No Normals: Green coding indicates a ‘non normaled’ circuit, GO-ahead and patch, nothing to lose! AVP Circuit Identification System (CIS) Allows Specific Circuit Identification … see page 41 Full Normals Half Normals No Normals Mosaic jackfields are shipped with normaling type identified by color, but interchangeable Indicators are available in 10 colors so you can color-code your system according to your own system design.
    [Show full text]
  • 212/SX Sub-Bass System FCC STATEMENT This Device Complies with Part 15 of the FCC Rules
    Operating Instructions for the 212/SX Sub-Bass System FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 1 2 Caution Marking Explanation The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
    [Show full text]
  • Our Locations
    BROADCAST & AV CATALOG Product Solutions for Broadcasters, Integrators, Contractors and End-Users Our Locations From our humble roots in Milwaukee, Wisconsin in 1962, IEWC has quickly expanded to a global network. All IEWC facilities are ISO 9001 registered, with our Boston, Massachusetts distribution center being certified under the AS9100 quality management system in support of the aerospace market. Contact your local IEWC sales office to discover which connectivity solutions we can bring to your business. UNITED STATES CANADA MEXICO Boston, MA Calgary, AB Aguascalientes 978-422-6000 403-215-6770 +52 449 922 1200 800-225-0802 800-649-7916 800-439-2100 F: 978-422-6040 F: +52 449 146 4294 Montreal, QC Cleveland, OH 514-956-5877 Monterrey 440-835-5601 +52 449 922 1200 800-321-5601 Toronto, ON 800-439-2100 905-726-1717 F: +52 449 146 4294 Dallas, TX 866-303-6596 972-801-9787 800-474-9984 UNITED KINGDOM F: 972-801-9789 CHINA Buckinghamshire* Hong Kong +44 0 1844 202101 El Paso, TX +86 512 6275 6668 F: +44 0 1844 202025 915-773-2951 800-828-2086 F: +86 512 6275 6663 Weston-super-Mare Greenville, SC +44 870 609 1257 864-234-5322 Suzhou F: +44 870 609 1258 800-480-5322 +86 512 6275 6668 F: 864-234-1020 800-828-2086 F: +86 512 6275 6663 Milwaukee, WI 262-782-2255 800-966-6325 GERMANY F: 262-782-2821 Frankfurt am Main +49 6175 79791 0 Phoenix, AZ F: +49 6175 79791 49 480-922-6900 800-989-9502 F: 480-922-0346 MIDDLE EAST Dubai* San Francisco, CA +9714 357 6800 925-939-3600 F: +9714 357 6900 866-472-9473 F: 925-686-4371 Tel-Aviv +972-(0)54-2809111 Seattle, WA 425-286-1900 F: 425-286-1919 *denotes Argosy Components Limited location Our Suppliers IEWC recognizes the importance of signal integrity and infrastructure reliability.
    [Show full text]
  • Addendum No. 2 Oakbrook
    Fairfield-Suisun Unified School District 3 2490 Hilborn Road• Fairfield, California 94534 Telephone (707) 399-5148 FAX: (707) 399-5162 www.fsusd.org “Fairfield-Suisun Unified School District is a premier learning community that empowers each student to thrive in an ever-changing world.” ADDENDUM NO. 2: Dated: October 7, 2020 PROJECT: Oakbrook Academy New Performing Arts Center BID #21F-111 DSA Application No: OAKBROOK 02-118453 To all bidders submitting proposals for the above captioned project. This Addendum is hereby included in the Contract Documents to the same extent as though it were originally included therein. The following items modify, add to, delete from, or explain the drawings and/or specifications. The contents of this Addendum shall take precedence over the original specifications and plans. Acknowledge receipt of this Addendum in the space provided in the Proposal Form. Failure to do so may subject Bidder to disqualification. A. CLARIFICATIONS Item A1. None. B. CHANGES TO SPECIFICATIONS Item B1. Refer to attached specification 27 41 00 AUDIVISUAL SYSTEMS with revisions noted. C. CHANGES TO DRAWINGS Item C1. Revise sheet A11.10 to read RSF for flooring in rooms K113 and K114. Item C2. Revise Sheets S3.1 and S3.2 to show total weight of the RTU-1 and RTU-3 with the curbs to 560lbs as approved by DSA. See sheets ADD2_S3.1, ADD2_S3.2a and ADD2_S3.2b. D. NEW DRAWINGS Item D1. None. Page 1 of 3 Oakbrook Academy New Performing Arts Center Bid# 21F-111 Addendum No. 2 October 7, 2020 E. RESPONSE TO BIDDER QUESTIONS Question 1.
    [Show full text]
  • Tzero MKIII Manual
    O Operating Instructions for the TZERO MKIII Sub-Bass System 1 2 Caution Marking Explanation The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safeguards 1 Read all of these instructions. 2 Save these instructions for future use. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with automotive polish and micro fiber cloth. 3 7 Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the grounding-type plug. A grounding type plug has two blades and a third grounding prong. The third prong is provided for your safety. If the provided plug does not fit into your outlet, consult and electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
    [Show full text]
  • Department of Backstage and Infrastructure Management Introduction to Transmission Cables
    Department of Backstage and Infrastructure Management Introduction to Transmission Cables XLR to XLR The XLR connector is a style of electrical connector, primarily found on professional audio, video, and stage lighting equipment. The connectors are circular in design and have 3 pins. XLR connectors are available in male and female versions in both cable and chassis mounting designs, a total of four styles. This is slightly unusual as many other connector designs omit one of the styles (typically a chassis mounting male connector). The female XLR connectors are designed to first connect pin 1 (the earth pin), before the other pins make contact, when a male XLR connector is inserted. With the ground connection established before the signal lines are connected, the insertion (and removal) of XLR connectors in live equipment is possible without picking up external signals (as it usually happens with, for example, RCA connectors). Three-pin XLR connectors are by far the most common style, and are an industry standard for balanced audio signals. The great majority of professional microphones use the XLR connector. In previous years, they were used for loudspeaker connections. Three-pin XLR connectors are used to interconnect powered speakers with line-level signals. This use is commonly seen PA system applications and seems to be growing more common. Five to Five, Five to XLR(Male/Female) This is actually a 6.5 mm connector but we, here at backstage, call it 5mm for ease of communication. This is a multipurpose cable. This type of cable is majorly used to connect electronic equipments to the mixer board e.g.
    [Show full text]
  • Instrument Cable for Uncompromising Road Use
    1 2 Cables & Stands Catalogue CABLES 5 STAR SERIES ...... 8-20 4 STAR SERIES ...... 22-38 3 STAR SERIES ...... 40-55 PROCAB CABLE ...... 56-69 POWER & HYBRID ...... 70-80 BULK CABLE ...... 82-101 MULTICORE CABLE ...... 102-117 CABLE DRUM & STAGE BOX ...... 118-127 CONNECTOR ...... 128-157 STANDS SPEAKER STANDS ...... 158-166 MICROPHONE STANDS ...... 168-175 LIGHTING STANDS ...... 176-783 LAPTOP STANDS ...... 184-187 KEYBOARD STANDS ...... 188-191 GUITAR STANDS ...... 192-195 MUSIC STANDS ...... 196-201 MUSIC LIGHTS ...... 202-211 MISCELLANEOUS ...... 212-217 SPEAKER TOP HATS ...... 218-221 ABOUT THE ADAM HALL GROUP The Adam Hall Group is a leading German manufacturing and distribution company providing event technology solutions around the globe to a diverse portfolio of business customers, including music instrument retailers and dealers, live event and rental companies, broadcast studios, AV and system integrators, private and public enterprises, and industrial flightcase manufacturers. The company offers a wide range of professional audio and lighting technology as well as stage equipment and flightcase hardware under its brands LD Systems®, Cameo®, Gravity®, Defender®, Palmer® and Adam Hall®. Founded in 1975, Adam Hall Group has developed into a collection of modern, innovative event technology companies. This includes an 8,000 square metre warehouse and logistics centre at the corporate headquarters near Frankfurt am Main, Germany. ADAM HALL GROUP BRANDS DISTRIBUTION BRANDS SOUND LIGHT STAGE HARDWARE TECHNOLOGY TECHNOLOGY EQUIPMENT FOR FLIGHTCASES EVENT TECHNOLOGY – IT´S A PEOPLE BUSINESS Whether you are a music instrument retailer, live event & rental company, broadcast studio, system integrator, installer, public or private enterprise, or an industrial fightcase manufacturer, we are excited to show you the latest in event technology, award-winning innovation, top quality brands, and our superior commitment to service and satisfaction.
    [Show full text]
  • B403 20090807 AVP Universal Bulkhead.Cdr
    MODEL UNIVERSALUNIVERSAL PANELPANEL SYSTEMSYSTEM UNIVERSAL BULKHEAD PANEL SYSTEM • Design your own bulkhead • Extensive selection of connector modules • 1RU, 2RU & 3RU, 16 & 12 position available Model WK-U216E2-Z • Strain relief cable bar is standard with optional Connector Kits Model WK-U116E1-Z 2RU version shown above Model WK-U212E2-Z 2 RU Side View Model WK-U112E1-Z 6.00” [15.24] 1 RU Full List of Universal Connector Kits on the Rear www.amt.com Insulated Bulkhead Modular Bulkhead Universal Connector Kits Ordering Information Model Description Universal Panel - Panel with Cable Bar Only; no Connectors, no Adaptor Plates, no Cover Plates WK-U216E3-Z 3RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U216E2-Z 2RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U116E1-Z 1RU, 1x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U212E3-Z 3RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U212E2-Z 2RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors Ordering Information WK-U112E1-Z 1RU, 1x12 Universal Panel, Panel & Cable Bar Only, No Connectors Model Description BUILD3 3 RU Assembly of connectors to panel BUILD2 2 RU Assembly of connectors to panel Connector Kits, kits include all components necessary to mount connector to panel BUILD1 1 RU Assembly of connectors to panel Data, Network UDB9-CF DB9 Female, crimp pin contacts, adaptor plate(s), hardware Ordering Information UDB9-CM DB9 Male, crimp pin contacts, adaptor plate(s), hardware Model Description UDB9-SF DB9
    [Show full text]
  • 1-1 Sommercablev6.1-Premadeforeventindustry2016.Pdf
    204 PREMADE CABLES www.sommercable.com · [email protected] TABLE OF CONTENTS PREMADE CABLES CABLES FOR MUSICIANS • Microphone cables . 206 • Instrument & guitar cable. 209 • Guitar cables “Vintage Style“ . 212 • OFFROAD-SERIES MICROPHONE, instrument & speaker cables. 213 • Guitar cables . 214 • Guitar hybrid cables . 216 • Guitar/keyboard cables . 218 • Pocket transmitter cables . 218 • Stereo keyboard cables. 219 • Speaker cables . 220 CABLES FOR PROFESSIONAL DJS • Toslink cables . 221 • RCA cables. 221 • RCA patch cables . 222 • Microphone cables . 223 • Instrument cables . 223 • MP3 player & headset cables. 223 • Computer monitor cables. 223 CABLES FOR THE EVENT INDUSTRY • Microphone cables . 224 • AES/EBU & DMX. 226 • Load + DMX. 228 • Loudspeakers + power, EN3. 230 • Twisted Pair CAT.7 . 231 • Speaker cables . 236 • Road adapters & attenuators. 237 • Power supply . 238 PREMADE CABLES CABLES FOR STUDIO APPLICATIONS • Microphone cables . 242 • Patch/insert cables: Mini XLR, Mini jack, TT phone, B gauge . 243 • Stereo split cables . 248 • MIDI cables . 249 • AES/EBU & DMX. 250 • Digital FOC . 250 • S/P-DIF 75 Ω . 251 • Studio looms. 252 CABLES FOR BROADCASTING APPLICATIONS • Microphone cables . 260 • Patch/Y-patch/adapter cables . 262 • Multipairs audio AES/EBU . 263 • Studio looms. .264 • Video cables . 266 • Patch cables DS connectors. 266 • Video patch cables HDTV . 267 • HD camera cables SMPTE311M. 268 • Triax cables . 269 • Video multicores. 270 CABLES FOR MEDIA TECHNOLOGY – CONFERENCE – HOME • NF phono cables . 272 • Subwoofer cables . 272 • Antenna cables . 272 • S-VHS cables . 273 • Scart cables . 274 • Video multicores. 275 • Monitor cables. 276 • Multimedia cables HDMI . 280 • Firewire. 281 • Displayport, USB . 282 • Twisted Pair CAT.5e/CAT.6/CAT.7. 284 • FOC patch cables & FOC drum systems .
    [Show full text]