DOCSLIB.ORG

AVP MFG & Supply Inc

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
AVP MFG & Supply Inc Mosaic Jackfield Systems Years Since 1985 AVP MFG & Supply Inc. v1.1 AMS25 Mosaic AMS25 AVP Mosaic audio and video patching components provide exceptional functionality and circuit identification standards to simplify system design, installation, operation and maintenance. Key Mosaic Features: • CIS (Circuit Identification System) allows color-coding of every circuit to visually identify each circuit by color • Patented designation design maximizes viewable area • Numbered jack positions for quick and accurate installation, system troubleshooting and operational ease • Front-mount jacks simplify system re-design and maintenance AVP suggests the use of the following color code to indicate various normaling options in Mosaic jackfields and patchbays. You are not limited to this color coding, as indicators are available in 10 colors. Our customers have found they are able to quickly determine the operation of each circuit by using the following standard: Red: Full Normals: Red coding is used for ‘full normals’ (normals strapped) to designate STOP and be sure of your action because patching a full normalled jack will cause you to lose a circuit. Yellow: Half Normals (audio): Yellow coding signifies patching into ‘half normaled’ positions, and CAUTIONS that patching the input (bottom jack) will break the path, while it is safe to patch into the top (output) without breaking the path. Green: No Normals: Green coding indicates a ‘non normaled’ circuit, GO-ahead and patch, nothing to lose! AVP Circuit Identification System (CIS) Allows Specific Circuit Identification … see page 41 Full Normals Half Normals No Normals Mosaic jackfields are shipped with normaling type identified by color, but interchangeable Indicators are available in 10 colors so you can color-code your system according to your own system design. (easily identify critical circuits, signal type etc) BLACK BROWN RED ORANGE YELLOW GREEN BLUE PURPLE GRAY WHITE www.jackfields.com Patent information: see inside back cover. Table of Contents AMS25 AVP Mosaic Video Microsize, Midsize and Standard Size, Features & Benefits 2 Video Jack Specifications 3 Table of Microsize Video Jackfields 4 Contents Midsize Video Jackfields 5 3x32 Midsize Video Monitor Jackfield 6 Standard Size Video Jackfields 7 Color-Coded RGB; 2RU, 2x24, 8 Normaled Circuits 6 Video Jackfield Designation Layouts 8 - 9 AVP Mosaic Audio Rapid Punch Terminal System (RPT) - Common Sense, Unsurpassed Performance Features and Benefits 10 - 11 Longframe, Full Enclosure & Umbilical Jackfields 12 Longframe Full Enclosure & Umbilical Designation Layouts 15 Bantam, Full Enclosure & Umbilical Jackfields 16 Bantam Full Enclosure & Umbilical Designation Layouts 18 - 19 Rack-Mount Terminal Panels 20 Wall-Mount Punch Block System 21-23 Morph Audio System with EDAC/ELCO 3Pin Interface Morph Audio Features & Benefits 24 - 25 Morph Audio, Longframe Jackfields 26 Morph Audio, Bantam Jackfields 27 Morph Audio, Longframe & Bantam Designation Layouts 28 - 29 Audio/Video/Data Combo Panel - HDTV, AES/EBU Audio & RS422 Patching Audio/Video/Data Combo Panel Features & Benefits 30 Audio/Video/Data Combo Panel Designation Layouts 32 Connectorized 90 Pin - AES/EBU Digital & Analog Audio Patching Connectorized 90 Pin Full Enclosure Bantam 33 Connectorized 90 Pin Full Enclosure Longframe 34 Connectorized 90 Pin Bantam Designation Layouts 35 Connectorized 90 Pin Longframe Designation Layouts 28 Jack and Panel Assemblies Bantam, Longframe & Designation Layouts 36 - 40 AVP Audio Jack Specifications - Longframe & Bantam 41 Circuit Identification System 41 Datapatch/RS422 Patching System - Durable Polarity Protected Patching Features & Benefits, Designation Layouts 42 - 43 Bulkhead Panels BNC-BNC Non & Semi-Recessed; F-F Connectors 44 - 45 XLR, TRI-LOC 46 Universal Bulkhead System - Design Your Own Bulkhead; 12 & 16 Positions 47 - 49 Universal Bulkhead System Designation Layouts 49 Modular Bulkhead - Split Mounting Plates allow Post-Termination Panel Mounting 50 - 52 Switchboard Style Patch System 51 Panel Dimensions & Designation Layouts 52 Hinged Access Bulkhead Frame - Shallow or Space Constricted Rack Solution 53 Patchcords 54 Audio Normaling 55 Years Video Normaling 56 Since 1985 Index Inside Back Cover Contact Information Back Cover AVP MFG & Supply Inc. www.jackfields.com 1 Patent information: see inside back cover. Video Jacks & Panels 1 RU Mosaic Video Jackfields 1 2 3 4 5 6 7 8 9 10 1.5 RU 1 2 3 4 5 6 7 8 9 10 • Front-mount 3.0GHz - 3Gb/s Micro Dual Video Jacks 1 2 3 4 5 6 7 8 9 10 meet SMPTE 424M-2006 specifications • Industry Standard DIN 1.0/2.3 rear termination 1.5 RU 1 2 3 4 5 6 7 8 9 10 • Allows 48 channels / 96 patchpoints in a 1RU, 19” rack Microsize Jacks or 96 channels / 192 patchpoints in a 1.5RU, 19” rack • Design is based on our very successful, market proven midsize & 2 RU standard size video jacks, with over a half million jacks in the field 1 2 3 4 5 6 7 8 9 10 • Life Cycle rating of 20,000 • Multiple jack configurations available Microsize Jacks • Made & assembled in Canada/USA 1 RU 1.5 RU Featuring: • SuperHD+ 3.0GHz - 3Gb/s Standard or Midsize jacks 2 RU • Jacks meet SMPTE 424M-2006 HDTV specifications Midsize Jacks • Life Cycle rating of 30,000 • Various normaling & terminating combinations for all applications Midsize Jacks • 1RU, 1.5RU or 2RU Mosaic panels • Made & assembled in Canada/USA Application: • HDTV, Serial Digital, Analog Features & Benefits 1 RU 1.5 RU • Front-mount jacks simplify system re-design & maintenance 2 RU • Numbered jack positions for quick and accurate installation, system troubleshooting & operational ease • Patented designation design maximizes viewable area AVP • CIS (Circuit Identification System), Standard Jacks allows color-coding of every circuit Mosaic Standard Jacks Panel Captive screws stay in the panel, not lost in the rack www.jackfields.com 2 Patent information: see inside back cover. Video 3.0GHz - 3Gb/s SMPTE 424M-2006 3.0GHz - 3Gb/s Microsize Dual Video Jack Specifications Smith Chart (Typical) 75 Ohms AVP-KMN75 AVP-KMN Microsize AVP-KMN75 AVP-KM75 AVP-KMN AVP-KM AVP-KM75 3.0GHz Normaled 3.0GHz Non-Normaled 3.0GHz Normaled 3.0GHz Non-Normaled AVP-KM Terminating Terminating Non-Terminating Non-Terminating Video Jacks Configurations Electrical: Mechanical: Start 300 kHz Stop 3.0 GHz Rated Bandwidth: 3.0GHz - 3Gb/s: meets HDTV Mechanical Shock: Per MIL-STD-202, Method 213, Insertion Loss (Typical) SMPTE 424M-2006 Specification and Test condition I 0 Characteristic Impedance: 75 Ohms Vibration: Per MIL-STD-202, Method 201 -5 -10 Specifications Contact Resistance: Less than 50 milliohms Life cycle: 20,000 minimum -15 tion Loss (dB) -20 Good Termination Resistance: 75 Ohms ± 1% -25 Inser AVP-KMN75 Material: AVP-KMN AVP-KM75 Environmental: Housing: Zinc alloy, nickel plated AVP-KM 0 600 1200 1800 2400 3000 Operating Temperature: -40°C to 65°C Center Contacts: Copper alloy, gold plated Frequency (MHz) Return Loss (Typical) Storage Temperature: -40°C to 65°C Switching Contacts: Copper alloy, gold plated AVP-KMN75 AVP-KMN 0 AVP-KM75 Thermal Shock: Per MIL-STD-202, Method 107 Grounding Contacts: Copper alloy, gold plated AVP-KM Moisture and Humidity: -5 Per MIL-STD-202, Method 106 Actuators: Thermoplastic, UL 94V-0 rated -10 RoHS: RoHS Compliant -15 Good Insulators: Teflon -20 Return Loss (dB) -25 -30 -35 0 600 1200 1800 2400 3000 Frequency (MHz) 3.0GHz - 3Gb/s Midsize Dual & Single Video Jack Specifications Smith Chart (Typical) 75 Ohms AVP-AMN75 Midsize AVP-AMN AVP-AM75 AVP-AM Video Jacks AVP-AMN75 AVP-AM75 AVP-AMN AVP-AM Normaled, Terminating Non-Normaled, Terminating Normaled, Non-Terminating Non-Normaled, Non-Terminating Configurations Electrical: Mechanical: Start 30 kHz Stop 3.0 GHz and Rated Bandwidth: 3.0GHz - 3Gb/s: meets HDTV Mechanical Shock: Per MIL-STD-202, Method 213, Insertion Loss (Typical) . Test condition 1 SMPTE 424M-2006 Specification 0 Specifications Characteristic Impedance: 75 Ohms Vibration: Per MIL-STD-202, Method 201 -1 Return Loss: See typical Return Loss chart Insertion Force: 7 lbs. maximum -2 tion Loss (dB) Good Insertion Loss: See typical Insertion Loss chart Withdrawal Force: 3 lb. minimum -3 Inser AVP-AMN75 Contact Resistance: Less than 50 milliohms Life cycle: 30,000 minimum -4 AVP-AMN AVP-AM75 AVP-AM Termination Resistance: 75 Ohms ± 1% 0 500 1000 1500 2000 2500 3000 Center Conductor: Accepts 0.048” pin diameter Frequency (MHz) Material: Return Loss (Typical) 0 Housing: Zinc alloy, nickel plated Environmental: -10 Center Contacts: Copper alloy , gold plated Operating Temperature: -40°C to 65°C -20 Switching Contacts: Copper alloy, gold plated Good Storage Temperature: -40°C to 65°C -30 Grounding Contacts: Copper alloy, gold plated -40 Thermal Shock: Per MIL-STD-202, Method 107 Return Loss (dB) AVP-AMN75 Actuators: Thermoplastic, UL 94V-0 rated -50 AVP-AMN Moisture and Humidity: Per MIL-STD-202, Method 106 AVP-AM75 AVP-AM BNC Insulators: Teflon -60 Compliant 0 500 1000 1500 2000 2500 3000 RoHS: Frequency (MHz) AVP-AMSL AVP-AMSS AVP-AMSL75 AVP-AMSS75 Non-Normaled, Non-Terminating Non-Normaled, Non-Terminating Non-Normaled, Terminating Non-Normaled, Terminating 3.0GHz - 3Gb/s Standard Dual Video Jack Specifications Standard Smith Chart (Typical) 75 Ohms AVP-ASN7511 AVP-ASN11 ASN7511B AVP-AS7511 AVP-AS11 Video Jacks Configurations AVP-ASN7511 AVP-AS7511 AVP-ASN11 AVP-AS11 Start 30 kHz Stop 3.0 GHz and Normaled Terminating Non-Normaled Terminating Normaled Non-Terminating Non-Normaled Non-Terminating Insertion Loss (Typical) Specifications Electrical: Mechanical: Rated Bandwidth: 3.0GHz - 3Gb/s: meets HDTV Mechanical Shock: Per MIL-STD-202, Method 213, 0 SMPTE 424M-2006 Specification Test condition I -1 -2 tion Loss (dB) Characteristic Impedance: 75 Ohms Vibration: Per MIL-STD-202, Method 201 Good -3 Inser Return Loss: See typical Return Loss chart Insertion Force: 12 lbs. maximum AVP-ASN7511 -4 AVP-ASN11 AVP-AS7511 Insertion Loss: See typical Insertion Loss chart Withdrawal Force: 3 lbs.
Load more

Recommended publications
  • Manufacturing and Supply of Professional Broadcast Equipment
    Manufacturing and Supply of Professional Broadcast Equipment For more than 40 years PERCON has been devoted to the design, manufacturing and marketing of professional cabling solutions for the Broadcast and multimedia fields. Our team is composed of over 40 technical, sales and logistics specialists that guarantee the best customer service and technical support and offer an impressive range of top-quality products to meet any project’s needs. In accordance to our customer-oriented strategy that has led us to constantly increase our products portfolio, PERCON’s renowned European audio, video, control, fiber and all type of multicore cables and assemblies are now accompanied by multiple related articles such as cable testers, connectors, tools, reels, etc. This catalogue encompasses all the items that make PERCON a one-stop shop for the broadcast and system integrations people. We thank you for the trust you have placed on us and that has situated PERCON as a key supplier in the international broadcast industry. German Permanyer Domènec Permanyer Permanyer Brothers. Old haberdashery, 1969. Quirze Permanyer The beginning PERCON’s origins date back to Mr Quirze Permanyer, whose enterprising spirit and ambition led him to start repairing radios and record players in the 1940s. Radios at the time were complicated and knowing how to repair them demanded being up to date with the “new technologies”, something that is still essential nowadays in PERCON’s policy. Over time, besides repairs, customers started ordering some customised cables for those devices and he realised that the cables were generating even more interest than the repairs themselves, so he started to focus his attention in supplying tailored assemblies.
    [Show full text]
  • B403 20120316 AVP Universal Bulkhead.Cdr
    Insulated Bulkhead Modular Bulkhead Universal Bulkhead Panel System • Design your own bulkhead • Extensive selection of connector modules • 1RU, 2RU & 3RU, 16 & 12 position available • Strain relief cable bar is standard Model WK-U216E2-Z with optional Connector Kits Model WK-U116E1-Z 2RU version shown above Model WK-U212E2-Z Model WK-U112E1-Z 2 RU 2 RU Side View Optional 1 RU 1 RU Side View Standard Cable Bar -3BAR Optional supplied with panel Cable Bar Standard Cable Bar -3BAR supplied with panel Cable Bar 6.00” [152.40mm] 3.179” [80.75mm] 6.00” [152.40mm] 3.179” [80.75mm] Full List of Universal Connector Kits on the Rear toll free: 1-800-481-2493 USA & Canada tel: 519-740-7966 • fax: 519-740-0131 • email: [email protected] B403 20120316 Universal Insulated Bulkhead Connector Kits Universal Connector Kits Ordering Information Model Description Universal Panel - Panel with Cable Bar Only; no Connectors, no Adaptor Plates, no Cover Plates WK-U216E3-Z 3RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U216E2-Z 2RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U116E1-Z 1RU, 1x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U212E3-Z 3RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors URJ45-5E UNAHDMI-W-B WK-U212E2-Z 2RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U112E1-Z 1RU, 1x12 Universal Panel, Panel & Cable Bar Only, No Connectors UNY330 Add -3BAR 3” [80.75mm] Cable Bar instead of standard 6.0”[152.40mm] Cable Bar BUILD3 3 RU Assembly of connectors to
    [Show full text]
  • Edu09 Tabloid.Pdf
    WIRED MICROPHONES – EDUCATION SUPPLEMENT 3 NEW! ASTATIC 1600VP CONTINUOUSLY-VARIABLE PATTERN EARTHWORKS FLEXWAND™ HIGH DEFINITION MIC, BOOM AND CONDENSER HANGING MIC SYSTEM This mic system has a STAND COMBO Combines a 30kHz high-definition microphone, a low- continuously-variable polar pattern controllable from a remote loca- CROWN PCC-160/PCC-160W Surface-mounted, profile mic stand and boom into a single unit. It allows the microphone head tion. Its remote box is rackmountable (up to 6 units per shelf), supercardioid condenser mi c in tend ed for stage floors, lec- to be positioned as high as 7ft and as low as 1.5ft from the floor or anywhere features a LED status indicator, has a selectable recessed terns, conference tables, and news desks. Features excellent gain-before- between, and there are no visible cables above floor level. Also available in (80Hz, 12dB/octave) hi-pass filter, is RF resistant, and has feed back, room noise and rear sound rejection. Sur face mount ing results white – substitute "W" for "B" in the model number. securable controls. It includes a 30' cable, wall plate, in a “half-supercardioid” polar pat tern with in creased di rec tiv i ty and sen si- ITEM DESCRIPTION LIST articulating steel hanger and all accessories for hang- tiv i ty. The low pro file and black fin ish make the PCC160 al most in vis i ble in FW730/C-B ............... Cardioid, black ..........................................................1595.00 ing the microphone. The large diameter, low-noise most ap pli ca tions. The PCC160W is a white ver sion. Phantom power only.
    [Show full text]
  • 212/SX Sub-Bass System FCC STATEMENT This Device Complies with Part 15 of the FCC Rules
    Operating Instructions for the 212/SX Sub-Bass System FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 1 2 Caution Marking Explanation The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
    [Show full text]
  • Our Locations
    BROADCAST & AV CATALOG Product Solutions for Broadcasters, Integrators, Contractors and End-Users Our Locations From our humble roots in Milwaukee, Wisconsin in 1962, IEWC has quickly expanded to a global network. All IEWC facilities are ISO 9001 registered, with our Boston, Massachusetts distribution center being certified under the AS9100 quality management system in support of the aerospace market. Contact your local IEWC sales office to discover which connectivity solutions we can bring to your business. UNITED STATES CANADA MEXICO Boston, MA Calgary, AB Aguascalientes 978-422-6000 403-215-6770 +52 449 922 1200 800-225-0802 800-649-7916 800-439-2100 F: 978-422-6040 F: +52 449 146 4294 Montreal, QC Cleveland, OH 514-956-5877 Monterrey 440-835-5601 +52 449 922 1200 800-321-5601 Toronto, ON 800-439-2100 905-726-1717 F: +52 449 146 4294 Dallas, TX 866-303-6596 972-801-9787 800-474-9984 UNITED KINGDOM F: 972-801-9789 CHINA Buckinghamshire* Hong Kong +44 0 1844 202101 El Paso, TX +86 512 6275 6668 F: +44 0 1844 202025 915-773-2951 800-828-2086 F: +86 512 6275 6663 Weston-super-Mare Greenville, SC +44 870 609 1257 864-234-5322 Suzhou F: +44 870 609 1258 800-480-5322 +86 512 6275 6668 F: 864-234-1020 800-828-2086 F: +86 512 6275 6663 Milwaukee, WI 262-782-2255 800-966-6325 GERMANY F: 262-782-2821 Frankfurt am Main +49 6175 79791 0 Phoenix, AZ F: +49 6175 79791 49 480-922-6900 800-989-9502 F: 480-922-0346 MIDDLE EAST Dubai* San Francisco, CA +9714 357 6800 925-939-3600 F: +9714 357 6900 866-472-9473 F: 925-686-4371 Tel-Aviv +972-(0)54-2809111 Seattle, WA 425-286-1900 F: 425-286-1919 *denotes Argosy Components Limited location Our Suppliers IEWC recognizes the importance of signal integrity and infrastructure reliability.
    [Show full text]
  • Addendum No. 2 Oakbrook
    Fairfield-Suisun Unified School District 3 2490 Hilborn Road• Fairfield, California 94534 Telephone (707) 399-5148 FAX: (707) 399-5162 www.fsusd.org “Fairfield-Suisun Unified School District is a premier learning community that empowers each student to thrive in an ever-changing world.” ADDENDUM NO. 2: Dated: October 7, 2020 PROJECT: Oakbrook Academy New Performing Arts Center BID #21F-111 DSA Application No: OAKBROOK 02-118453 To all bidders submitting proposals for the above captioned project. This Addendum is hereby included in the Contract Documents to the same extent as though it were originally included therein. The following items modify, add to, delete from, or explain the drawings and/or specifications. The contents of this Addendum shall take precedence over the original specifications and plans. Acknowledge receipt of this Addendum in the space provided in the Proposal Form. Failure to do so may subject Bidder to disqualification. A. CLARIFICATIONS Item A1. None. B. CHANGES TO SPECIFICATIONS Item B1. Refer to attached specification 27 41 00 AUDIVISUAL SYSTEMS with revisions noted. C. CHANGES TO DRAWINGS Item C1. Revise sheet A11.10 to read RSF for flooring in rooms K113 and K114. Item C2. Revise Sheets S3.1 and S3.2 to show total weight of the RTU-1 and RTU-3 with the curbs to 560lbs as approved by DSA. See sheets ADD2_S3.1, ADD2_S3.2a and ADD2_S3.2b. D. NEW DRAWINGS Item D1. None. Page 1 of 3 Oakbrook Academy New Performing Arts Center Bid# 21F-111 Addendum No. 2 October 7, 2020 E. RESPONSE TO BIDDER QUESTIONS Question 1.
    [Show full text]
  • Tzero MKIII Manual
    O Operating Instructions for the TZERO MKIII Sub-Bass System 1 2 Caution Marking Explanation The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safeguards 1 Read all of these instructions. 2 Save these instructions for future use. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with automotive polish and micro fiber cloth. 3 7 Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the grounding-type plug. A grounding type plug has two blades and a third grounding prong. The third prong is provided for your safety. If the provided plug does not fit into your outlet, consult and electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
    [Show full text]
  • Project #2014-13 AUDIO VISUAL UPGRADE PROJECT SPECIFICATIONS
    Project #2014-13 AUDIO VISUAL UPGRADE PROJECT SPECIFICATIONS (Dated: September 19, 2014) Village of Irvington 85 Main Street Irvington, NY 10533 Tel: (914) 591-4356 Fax: (914) 591-4072 Web Site: WWW.IRVINGTONNY.GOV September 19, 2014 Audio Visual Upgrade Project Contract No. 2014-13 DIVISION #0: BIDDING AND CONTRACT REQUIREMENTS SECTION #AB: NOTICE TO BIDDERS VILLAGE OF IRVINGTON AUDIO VISUAL UPGRADE PROJECT WESTCHESTER COUNTY NEW YORK CONTRACT NO 2014-13 A. NOTICE TO BIDDERS 1. Bids will be received by the Village Clerk of Irvington until 11:00 a.m. on October 29, 2014 at the Village Hall, 85 Main Street, Irvington, New York 10533 for Contract No. 2014-13. Sealed bids can be mailed or delivered to Brenda Jeselnik, Clerk/Treasurer for receipt on or before the bid date/time. 2 Attention of bidders is called to the requirements as to conditions of employment to be observed and minimum wage rates to be paid under the contract. The bidder to whom a contract is awarded will not be required to furnish performance or payment bonds. 3 Plans, specifications and all information relative thereto may be secured at the Irvington Village Hall, Administrator’s Office, 85 Main St, Irvington, NY on online at www.irvingtonny.gov. The Village will not be responsible for full or partial sets of contract documents, including any addenda obtained from any other source. The Board of Trustees reserves the right to waive any formalities and to reject any or all bids. Village of Irvington Brenda M. Jeselnik Clerk/Treasurer September 19, 2014 Audio Visual Upgrade Project Contract No.
    [Show full text]
  • Department of Backstage and Infrastructure Management Introduction to Transmission Cables
    Department of Backstage and Infrastructure Management Introduction to Transmission Cables XLR to XLR The XLR connector is a style of electrical connector, primarily found on professional audio, video, and stage lighting equipment. The connectors are circular in design and have 3 pins. XLR connectors are available in male and female versions in both cable and chassis mounting designs, a total of four styles. This is slightly unusual as many other connector designs omit one of the styles (typically a chassis mounting male connector). The female XLR connectors are designed to first connect pin 1 (the earth pin), before the other pins make contact, when a male XLR connector is inserted. With the ground connection established before the signal lines are connected, the insertion (and removal) of XLR connectors in live equipment is possible without picking up external signals (as it usually happens with, for example, RCA connectors). Three-pin XLR connectors are by far the most common style, and are an industry standard for balanced audio signals. The great majority of professional microphones use the XLR connector. In previous years, they were used for loudspeaker connections. Three-pin XLR connectors are used to interconnect powered speakers with line-level signals. This use is commonly seen PA system applications and seems to be growing more common. Five to Five, Five to XLR(Male/Female) This is actually a 6.5 mm connector but we, here at backstage, call it 5mm for ease of communication. This is a multipurpose cable. This type of cable is majorly used to connect electronic equipments to the mixer board e.g.
    [Show full text]
  • Instrument Cable for Uncompromising Road Use
    1 2 Cables & Stands Catalogue CABLES 5 STAR SERIES ...... 8-20 4 STAR SERIES ...... 22-38 3 STAR SERIES ...... 40-55 PROCAB CABLE ...... 56-69 POWER & HYBRID ...... 70-80 BULK CABLE ...... 82-101 MULTICORE CABLE ...... 102-117 CABLE DRUM & STAGE BOX ...... 118-127 CONNECTOR ...... 128-157 STANDS SPEAKER STANDS ...... 158-166 MICROPHONE STANDS ...... 168-175 LIGHTING STANDS ...... 176-783 LAPTOP STANDS ...... 184-187 KEYBOARD STANDS ...... 188-191 GUITAR STANDS ...... 192-195 MUSIC STANDS ...... 196-201 MUSIC LIGHTS ...... 202-211 MISCELLANEOUS ...... 212-217 SPEAKER TOP HATS ...... 218-221 ABOUT THE ADAM HALL GROUP The Adam Hall Group is a leading German manufacturing and distribution company providing event technology solutions around the globe to a diverse portfolio of business customers, including music instrument retailers and dealers, live event and rental companies, broadcast studios, AV and system integrators, private and public enterprises, and industrial flightcase manufacturers. The company offers a wide range of professional audio and lighting technology as well as stage equipment and flightcase hardware under its brands LD Systems®, Cameo®, Gravity®, Defender®, Palmer® and Adam Hall®. Founded in 1975, Adam Hall Group has developed into a collection of modern, innovative event technology companies. This includes an 8,000 square metre warehouse and logistics centre at the corporate headquarters near Frankfurt am Main, Germany. ADAM HALL GROUP BRANDS DISTRIBUTION BRANDS SOUND LIGHT STAGE HARDWARE TECHNOLOGY TECHNOLOGY EQUIPMENT FOR FLIGHTCASES EVENT TECHNOLOGY – IT´S A PEOPLE BUSINESS Whether you are a music instrument retailer, live event & rental company, broadcast studio, system integrator, installer, public or private enterprise, or an industrial fightcase manufacturer, we are excited to show you the latest in event technology, award-winning innovation, top quality brands, and our superior commitment to service and satisfaction.
    [Show full text]
  • B403 20090807 AVP Universal Bulkhead.Cdr
    MODEL UNIVERSALUNIVERSAL PANELPANEL SYSTEMSYSTEM UNIVERSAL BULKHEAD PANEL SYSTEM • Design your own bulkhead • Extensive selection of connector modules • 1RU, 2RU & 3RU, 16 & 12 position available Model WK-U216E2-Z • Strain relief cable bar is standard with optional Connector Kits Model WK-U116E1-Z 2RU version shown above Model WK-U212E2-Z 2 RU Side View Model WK-U112E1-Z 6.00” [15.24] 1 RU Full List of Universal Connector Kits on the Rear www.amt.com Insulated Bulkhead Modular Bulkhead Universal Connector Kits Ordering Information Model Description Universal Panel - Panel with Cable Bar Only; no Connectors, no Adaptor Plates, no Cover Plates WK-U216E3-Z 3RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U216E2-Z 2RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U116E1-Z 1RU, 1x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U212E3-Z 3RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U212E2-Z 2RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors Ordering Information WK-U112E1-Z 1RU, 1x12 Universal Panel, Panel & Cable Bar Only, No Connectors Model Description BUILD3 3 RU Assembly of connectors to panel BUILD2 2 RU Assembly of connectors to panel Connector Kits, kits include all components necessary to mount connector to panel BUILD1 1 RU Assembly of connectors to panel Data, Network UDB9-CF DB9 Female, crimp pin contacts, adaptor plate(s), hardware Ordering Information UDB9-CM DB9 Male, crimp pin contacts, adaptor plate(s), hardware Model Description UDB9-SF DB9
    [Show full text]
  • 1-1 Sommercablev6.1-Premadeforeventindustry2016.Pdf
    204 PREMADE CABLES www.sommercable.com · [email protected] TABLE OF CONTENTS PREMADE CABLES CABLES FOR MUSICIANS • Microphone cables . 206 • Instrument & guitar cable. 209 • Guitar cables “Vintage Style“ . 212 • OFFROAD-SERIES MICROPHONE, instrument & speaker cables. 213 • Guitar cables . 214 • Guitar hybrid cables . 216 • Guitar/keyboard cables . 218 • Pocket transmitter cables . 218 • Stereo keyboard cables. 219 • Speaker cables . 220 CABLES FOR PROFESSIONAL DJS • Toslink cables . 221 • RCA cables. 221 • RCA patch cables . 222 • Microphone cables . 223 • Instrument cables . 223 • MP3 player & headset cables. 223 • Computer monitor cables. 223 CABLES FOR THE EVENT INDUSTRY • Microphone cables . 224 • AES/EBU & DMX. 226 • Load + DMX. 228 • Loudspeakers + power, EN3. 230 • Twisted Pair CAT.7 . 231 • Speaker cables . 236 • Road adapters & attenuators. 237 • Power supply . 238 PREMADE CABLES CABLES FOR STUDIO APPLICATIONS • Microphone cables . 242 • Patch/insert cables: Mini XLR, Mini jack, TT phone, B gauge . 243 • Stereo split cables . 248 • MIDI cables . 249 • AES/EBU & DMX. 250 • Digital FOC . 250 • S/P-DIF 75 Ω . 251 • Studio looms. 252 CABLES FOR BROADCASTING APPLICATIONS • Microphone cables . 260 • Patch/Y-patch/adapter cables . 262 • Multipairs audio AES/EBU . 263 • Studio looms. .264 • Video cables . 266 • Patch cables DS connectors. 266 • Video patch cables HDTV . 267 • HD camera cables SMPTE311M. 268 • Triax cables . 269 • Video multicores. 270 CABLES FOR MEDIA TECHNOLOGY – CONFERENCE – HOME • NF phono cables . 272 • Subwoofer cables . 272 • Antenna cables . 272 • S-VHS cables . 273 • Scart cables . 274 • Video multicores. 275 • Monitor cables. 276 • Multimedia cables HDMI . 280 • Firewire. 281 • Displayport, USB . 282 • Twisted Pair CAT.5e/CAT.6/CAT.7. 284 • FOC patch cables & FOC drum systems .
    [Show full text]