DOCSLIB.ORG

B403 20120316 AVP Universal Bulkhead.Cdr

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
B403 20120316 AVP Universal Bulkhead.Cdr Insulated Bulkhead Modular Bulkhead Universal Bulkhead Panel System • Design your own bulkhead • Extensive selection of connector modules • 1RU, 2RU & 3RU, 16 & 12 position available • Strain relief cable bar is standard Model WK-U216E2-Z with optional Connector Kits Model WK-U116E1-Z 2RU version shown above Model WK-U212E2-Z Model WK-U112E1-Z 2 RU 2 RU Side View Optional 1 RU 1 RU Side View Standard Cable Bar -3BAR Optional supplied with panel Cable Bar Standard Cable Bar -3BAR supplied with panel Cable Bar 6.00” [152.40mm] 3.179” [80.75mm] 6.00” [152.40mm] 3.179” [80.75mm] Full List of Universal Connector Kits on the Rear toll free: 1-800-481-2493 USA & Canada tel: 519-740-7966 • fax: 519-740-0131 • email: [email protected] B403 20120316 Universal Insulated Bulkhead Connector Kits Universal Connector Kits Ordering Information Model Description Universal Panel - Panel with Cable Bar Only; no Connectors, no Adaptor Plates, no Cover Plates WK-U216E3-Z 3RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U216E2-Z 2RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U116E1-Z 1RU, 1x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U212E3-Z 3RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors URJ45-5E UNAHDMI-W-B WK-U212E2-Z 2RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U112E1-Z 1RU, 1x12 Universal Panel, Panel & Cable Bar Only, No Connectors UNY330 Add -3BAR 3” [80.75mm] Cable Bar instead of standard 6.0”[152.40mm] Cable Bar BUILD3 3 RU Assembly of connectors to panel UNN320 BUILD2 2 RU Assembly of connectors to panel UNE8FDV-YK-B BUILD1 1 RU Assembly of connectors to panel AT-ZTOOL Siemon Z-MAX Z-Tool UNBB75DFIB-P Ordering Information Ordering Information Ordering Information Model Description Model Description Model Description Connector Kits, kits include all components Connector Kits, kits include all components Connector Kits, kits include all components necessary to mount connector to panel necessary to mount connector to panel necessary to mount connector to panel Audio Audio Video UBLN-XFB Panel-mount Balun, female XLR 3Pin 110W, UNX330 XLR female, 3 pin, black/gold contacts, solder, UHF310 F Style Feedthru, AVP HF310, to BNC 75ohm, hardware panel mount, hardware adaptor plate(s), hardware UBLN-XMB Panel-mount Balun, male XLR 3Pin 110W, UNY330 XLR male, 3 pin, black/gold contacts, solder, UHF310R F Style Feedthru, recessed, AVP HF310, to BNC 75ohm, hardware panel mount, hardware adaptor plate(s), hardware UBLN-BXF Panel-mount Balun, BNC 75ohm, UNX430 XLR female, 4 pin, black/gold contacts, solder, UJJ300 BNC Coaxial Feedthru, 3 GHz, AVP JJ300, to female XLR 3Pin 110ohm, hardware panel mount, hardware adaptor plate(s), hardware UBLN-BXM Panel-mount Balun, BNC 75ohm, UNY430 XLR male, 4 pin, black/gold contacts, solder, UJJ300R BNC Coaxial Feedthru, 3 GHz, recessed, to male XLR 3Pin 110ohm, hardware panel mount, hardware AVP JJ300, adaptor plate(s), h/w UBLN-XFB-10 Panel-mount Balun, female XLR 3Pin 110W, UNX530 XLR female, 5 pin, black/gold contacts, solder, UBNC50-F BNC Coaxial Feedthru, 50ohm, F-F, to BNC 75ohm, -10dB attenuation, h/w panel mount, hardware adapter plate(s), hardware UBLN-BXF-10 Panel-mount Balun, BNC 75ohm, UNY530 XLR male, 5 pin, black/gold contacts, solder, UNBB75DFIB-P BNC Coaxial Feedthru, 75ohm, F-F, recessed, to female XLR 3Pin 110ohm, -10dB atten, h/w panel mount, hardware isolated, Neutrik NBB75DFIB-P, h/w UE3R-C EDAC Receptacle, 3 pin crimp, UNX630 XLR female, 6 pin, black/gold contacts, solder, USMA SMA 50ohm Coaxial Connector, feed-thru, adaptor plate(s), hardware panel mount, hardware f-f, adaptor plate(s), hardware UE3R-S EDAC Receptacle, 3 pin solder, UNX631-S XLR female, 6 pin, silver, solder, Switchcraft USVHS-4G SVHS Feedthru, 4 pin, gold contacts, adaptor plate(s), hardware equivalent, panel mount, h/w adaptor plate(s), hardware UMIDI MIDI Isolated Connector, solder type, hardware UNY630 XLR male, 6 pin, black/gold contacts, solder, USVHS-4N SVHS Feedthru, 4 pin, nickel contacts, panel mount, hardware adaptor plate(s), hardware UNL2MP Speakon Connector, 2-Pole, solder termination, UNX730 XLR female, 7 pin, black/gold contacts, solder, panel mount, hardware panel mount, hardware UNL4MP Speakon Connector, 4-Pole, solder termination, UNY730 XLR male, 7 pin, black/gold contacts, solder, panel mount, hardware panel mount, hardware UNL4MP-B Speakon Connector, 4-Pole, black/gold URCA-R RCA Feedthru, red, adaptor plate(s), hardware contacts, solder, panel mount, h/w UNX331 XLR, female, 3 pin, silver, solder termination, URCA-W RCA Feedthru, white, adaptor plate(s), panel mount, hardware hardware UNY331 XLR, male, 3 pin, silver, solder termination, URCA-Y RCA Feedthru, yellow, adaptor plate(s), panel mount, hardware hardware UNX331-FM XLR, Feedthru, female to male, 3 pin, silver, US35J Stereo Mini-Audio Jack 3.5mm, female, solder, panel mount, hardware adaptor plate(s), hardware UNY331-MF XLR, Feedthru, male to female, 3 pin, silver, USPJ 1/4” Stereo Phone Jack, solder termination, panel mount, hardware panel mount, hardware Data, Network, Fiber Optic and Miscellaneous next page... In the interest of improved design and performance, AVP reserves the right to make changes in its specifications without prior notice. Copyright © 2011 AVP MFG & Supply Inc. toll free: 1-800-481-2493 USA & Canada tel: 519-740-7966 • fax: 519-740-0131 • email: [email protected] Universal Insulated Bulkhead Connector Kits Universal Connector Kits Ordering Information Ordering Information Ordering Information Model Description Model Description Model Description Connector Kits, kits include all components Connector Kits, kits include all components Connector Kits, kits include all components necessary to mount connector to panel necessary to mount connector to panel necessary to mount connector to panel Data, Network Data, Network Fiber Optic UD9-CF D-Sub 9-pin Female, crimp, socket contacts, UMD66FF Mini Din Feedthru, 6 pin female-female, PS/2, UFO-ST ST Fiber Optic Coupler, multimode, feed-thru, adaptor plate(s), hardware keyboard, adaptor plate(s), hardware f-f, end caps, adaptor plate(s), hardware UD9-CM D-Sub 9-pin Male, crimp, plug contacts, UNE8FDV-YK-B RJ45, IDC Krone interface, Neutrik UFO-ST-SM ST Fiber Optic Coupler, singlemode, feed-thru, adaptor plate(s), hardware NE8FDV-YK-B, h/w (req. IDC punch tool) f-f, end caps, adaptor plate(s), hardware UD9-SF D-Sub 9-pin Female, solder, socket contacts, UNE8FDY-C6-B EtherCON CAT6, up to 10 Gbit/s data rate, ULCD-T LC Duplex Adaptor suitable for singlemode & adaptor plate(s), hardware Neutrik NE8FDY-C6-B, toolless IDC termination multimode applications, adaptor plate(s), h/w UD9-SM D-Sub 9-pin Male, solder, plug contacts, URJ11-F RJ11 6 pos/6 con, Feedthru, female-female, ULCD-MM LC Duplex Adaptor for Multimode applications, adaptor plate(s), hardware adaptor plate(s), hardware adaptor plate(s), hardware UD9-SCF D-Sub 9-pin Female, solder cup, socket contacts, URJ11 RJ11 6 pos/6 con, IDC interface, adaptor UNO2-4FDW-1-R Neutrik Opticalcon Chassis connector, adaptor plate(s), hardware plate(s), hardware (tool-less termination) 1 LC-Duplex feedthru socket, 1 shell ground UD9-SCM D-Sub 9-pin Male, solder cup, plug contacts, URJ45-5EF RJ45 CAT5E, Feedthru, female-female, contact (for SMPTE cable shield), hardware adaptor plate(s), hardware adaptor plate(s), hardware UD9-FF D-Sub 9-pin Female to Female Feedthru, URJ45-5E RJ45 CAT5E, 110 interface, adaptor plate(s), USC-0 SC Multimode fiber optic connector, feed-thru, adaptor plate, hardware hardware (req. 110 punch tool) female-female, adaptor plate(s), hardware UD9-MM D-Sub 9-pin Male to Male Feedthru, adaptor URJ45-6 RJ45 CAT6, 110 interface, adaptor plate(s), USC-1 SC Singlemode/Multimode fiber optic plate, hardware hardware (req. 110 punch tool) connector, feed-thru, f-f, adaptor plate(s), h/w UD9-MF D-Sub 9-pin Male to Female Feedthru, adaptor URJ45-6A RJ45 CAT6A, no door, adaptor plate(s), USMA SMA fiber optic coupler, feed-thru, plate, hardware hardware (requires Z-Tool for termination) female-female, adaptor plate(s), hardware UD9-FM D-Sub 9-pin Female to Male Feedthru, adaptor URJ45-6AS RJ45 CAT6A, EMI/RFI Shielding, die-cast UTOS Toslink optical audio coupler, feed-thru, plate, hardware housing, adaptor plate(s), h/w (tool-less term.) adaptor plate(s), hardware UFW-4 FireWire, 4 pin, IEEE 1394, Feedthru, URJ45-6F RJ45 CAT6, Feedthru, female-female, female-female, adaptor plate(s), hardware adaptor plate(s), hardware Miscellaneous UFW-6 FireWire, 6 pin, IEEE 1394, Feedthru, USB-A USB Type A Feedthru, female-female, UCP Blank Cover Plate, black, hardware, female-female, chassis mount, hardware adaptor plate(s), hardware covers one position UHD15-CF HD15/VGA 15 pin connector, female, crimp, USB-B USB Type B Feedthru, female-female, UB2-M Banana Jacks, 2, red/black, solder, adaptor plate(s), hardware adaptor plate(s), hardware adaptor plate(s), hardware UHD15-CM HD15/VGA 15 pin connector, male, crimp, USB-AB USB Type A front, Type B on rear, UB3-M Banana Jacks, 3, red/black/green, solder, adaptor plate(s), hardware female-female, adaptor plate(s), hardware adaptor plate(s), hardware UHDMI-DFF HDMI feedthru, female-female, chassis mount, UBP1-S Binding Post, single, green, solder, will accept hardware banana jacks, adaptor plate(s), h/w UNAHDMI-W-B HDMI 1.3 feedthru, f-f, Neutrik NAHDMI-W-B, UBP2-S Binding Posts, double, red/black, solder, will hardware accept banana jacks, adaptor plate(s), h/w UTNC-F TNC Coaxial Adapter, Feedthru, F-F, 50 Ohm, adaptor plate(s), hardware UMTS-L Miniature Toggle Switch, DPDT, Locking Handle, 3 Amps, 250VAC, Solder, adaptor plate(s), h/w USVHS-G UB3-M USC-O URJ45-5E URCA-RD USPJ UNN320 UNY330 UMTS-L UNL4MP UHDMI-DFF UBP2-S UDB9-CF UE3R-C UFJ310R UDB9-SF UBP1-S UJJ300 In the interest of improved design and performance, AVP reserves the right to make changes in its specifications without prior notice.
Load more

Recommended publications
  • Manufacturing and Supply of Professional Broadcast Equipment
    Manufacturing and Supply of Professional Broadcast Equipment For more than 40 years PERCON has been devoted to the design, manufacturing and marketing of professional cabling solutions for the Broadcast and multimedia fields. Our team is composed of over 40 technical, sales and logistics specialists that guarantee the best customer service and technical support and offer an impressive range of top-quality products to meet any project’s needs. In accordance to our customer-oriented strategy that has led us to constantly increase our products portfolio, PERCON’s renowned European audio, video, control, fiber and all type of multicore cables and assemblies are now accompanied by multiple related articles such as cable testers, connectors, tools, reels, etc. This catalogue encompasses all the items that make PERCON a one-stop shop for the broadcast and system integrations people. We thank you for the trust you have placed on us and that has situated PERCON as a key supplier in the international broadcast industry. German Permanyer Domènec Permanyer Permanyer Brothers. Old haberdashery, 1969. Quirze Permanyer The beginning PERCON’s origins date back to Mr Quirze Permanyer, whose enterprising spirit and ambition led him to start repairing radios and record players in the 1940s. Radios at the time were complicated and knowing how to repair them demanded being up to date with the “new technologies”, something that is still essential nowadays in PERCON’s policy. Over time, besides repairs, customers started ordering some customised cables for those devices and he realised that the cables were generating even more interest than the repairs themselves, so he started to focus his attention in supplying tailored assemblies.
    [Show full text]
  • Edu09 Tabloid.Pdf
    WIRED MICROPHONES – EDUCATION SUPPLEMENT 3 NEW! ASTATIC 1600VP CONTINUOUSLY-VARIABLE PATTERN EARTHWORKS FLEXWAND™ HIGH DEFINITION MIC, BOOM AND CONDENSER HANGING MIC SYSTEM This mic system has a STAND COMBO Combines a 30kHz high-definition microphone, a low- continuously-variable polar pattern controllable from a remote loca- CROWN PCC-160/PCC-160W Surface-mounted, profile mic stand and boom into a single unit. It allows the microphone head tion. Its remote box is rackmountable (up to 6 units per shelf), supercardioid condenser mi c in tend ed for stage floors, lec- to be positioned as high as 7ft and as low as 1.5ft from the floor or anywhere features a LED status indicator, has a selectable recessed terns, conference tables, and news desks. Features excellent gain-before- between, and there are no visible cables above floor level. Also available in (80Hz, 12dB/octave) hi-pass filter, is RF resistant, and has feed back, room noise and rear sound rejection. Sur face mount ing results white – substitute "W" for "B" in the model number. securable controls. It includes a 30' cable, wall plate, in a “half-supercardioid” polar pat tern with in creased di rec tiv i ty and sen si- ITEM DESCRIPTION LIST articulating steel hanger and all accessories for hang- tiv i ty. The low pro file and black fin ish make the PCC160 al most in vis i ble in FW730/C-B ............... Cardioid, black ..........................................................1595.00 ing the microphone. The large diameter, low-noise most ap pli ca tions. The PCC160W is a white ver sion. Phantom power only.
    [Show full text]
  • AVP MFG & Supply Inc
    Mosaic Jackfield Systems Years Since 1985 AVP MFG & Supply Inc. v1.1 AMS25 Mosaic AMS25 AVP Mosaic audio and video patching components provide exceptional functionality and circuit identification standards to simplify system design, installation, operation and maintenance. Key Mosaic Features: • CIS (Circuit Identification System) allows color-coding of every circuit to visually identify each circuit by color • Patented designation design maximizes viewable area • Numbered jack positions for quick and accurate installation, system troubleshooting and operational ease • Front-mount jacks simplify system re-design and maintenance AVP suggests the use of the following color code to indicate various normaling options in Mosaic jackfields and patchbays. You are not limited to this color coding, as indicators are available in 10 colors. Our customers have found they are able to quickly determine the operation of each circuit by using the following standard: Red: Full Normals: Red coding is used for ‘full normals’ (normals strapped) to designate STOP and be sure of your action because patching a full normalled jack will cause you to lose a circuit. Yellow: Half Normals (audio): Yellow coding signifies patching into ‘half normaled’ positions, and CAUTIONS that patching the input (bottom jack) will break the path, while it is safe to patch into the top (output) without breaking the path. Green: No Normals: Green coding indicates a ‘non normaled’ circuit, GO-ahead and patch, nothing to lose! AVP Circuit Identification System (CIS) Allows Specific Circuit Identification … see page 41 Full Normals Half Normals No Normals Mosaic jackfields are shipped with normaling type identified by color, but interchangeable Indicators are available in 10 colors so you can color-code your system according to your own system design.
    [Show full text]
  • 212/SX Sub-Bass System FCC STATEMENT This Device Complies with Part 15 of the FCC Rules
    Operating Instructions for the 212/SX Sub-Bass System FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 1 2 Caution Marking Explanation The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
    [Show full text]
  • Our Locations
    BROADCAST & AV CATALOG Product Solutions for Broadcasters, Integrators, Contractors and End-Users Our Locations From our humble roots in Milwaukee, Wisconsin in 1962, IEWC has quickly expanded to a global network. All IEWC facilities are ISO 9001 registered, with our Boston, Massachusetts distribution center being certified under the AS9100 quality management system in support of the aerospace market. Contact your local IEWC sales office to discover which connectivity solutions we can bring to your business. UNITED STATES CANADA MEXICO Boston, MA Calgary, AB Aguascalientes 978-422-6000 403-215-6770 +52 449 922 1200 800-225-0802 800-649-7916 800-439-2100 F: 978-422-6040 F: +52 449 146 4294 Montreal, QC Cleveland, OH 514-956-5877 Monterrey 440-835-5601 +52 449 922 1200 800-321-5601 Toronto, ON 800-439-2100 905-726-1717 F: +52 449 146 4294 Dallas, TX 866-303-6596 972-801-9787 800-474-9984 UNITED KINGDOM F: 972-801-9789 CHINA Buckinghamshire* Hong Kong +44 0 1844 202101 El Paso, TX +86 512 6275 6668 F: +44 0 1844 202025 915-773-2951 800-828-2086 F: +86 512 6275 6663 Weston-super-Mare Greenville, SC +44 870 609 1257 864-234-5322 Suzhou F: +44 870 609 1258 800-480-5322 +86 512 6275 6668 F: 864-234-1020 800-828-2086 F: +86 512 6275 6663 Milwaukee, WI 262-782-2255 800-966-6325 GERMANY F: 262-782-2821 Frankfurt am Main +49 6175 79791 0 Phoenix, AZ F: +49 6175 79791 49 480-922-6900 800-989-9502 F: 480-922-0346 MIDDLE EAST Dubai* San Francisco, CA +9714 357 6800 925-939-3600 F: +9714 357 6900 866-472-9473 F: 925-686-4371 Tel-Aviv +972-(0)54-2809111 Seattle, WA 425-286-1900 F: 425-286-1919 *denotes Argosy Components Limited location Our Suppliers IEWC recognizes the importance of signal integrity and infrastructure reliability.
    [Show full text]
  • Addendum No. 2 Oakbrook
    Fairfield-Suisun Unified School District 3 2490 Hilborn Road• Fairfield, California 94534 Telephone (707) 399-5148 FAX: (707) 399-5162 www.fsusd.org “Fairfield-Suisun Unified School District is a premier learning community that empowers each student to thrive in an ever-changing world.” ADDENDUM NO. 2: Dated: October 7, 2020 PROJECT: Oakbrook Academy New Performing Arts Center BID #21F-111 DSA Application No: OAKBROOK 02-118453 To all bidders submitting proposals for the above captioned project. This Addendum is hereby included in the Contract Documents to the same extent as though it were originally included therein. The following items modify, add to, delete from, or explain the drawings and/or specifications. The contents of this Addendum shall take precedence over the original specifications and plans. Acknowledge receipt of this Addendum in the space provided in the Proposal Form. Failure to do so may subject Bidder to disqualification. A. CLARIFICATIONS Item A1. None. B. CHANGES TO SPECIFICATIONS Item B1. Refer to attached specification 27 41 00 AUDIVISUAL SYSTEMS with revisions noted. C. CHANGES TO DRAWINGS Item C1. Revise sheet A11.10 to read RSF for flooring in rooms K113 and K114. Item C2. Revise Sheets S3.1 and S3.2 to show total weight of the RTU-1 and RTU-3 with the curbs to 560lbs as approved by DSA. See sheets ADD2_S3.1, ADD2_S3.2a and ADD2_S3.2b. D. NEW DRAWINGS Item D1. None. Page 1 of 3 Oakbrook Academy New Performing Arts Center Bid# 21F-111 Addendum No. 2 October 7, 2020 E. RESPONSE TO BIDDER QUESTIONS Question 1.
    [Show full text]
  • Tzero MKIII Manual
    O Operating Instructions for the TZERO MKIII Sub-Bass System 1 2 Caution Marking Explanation The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safeguards 1 Read all of these instructions. 2 Save these instructions for future use. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with automotive polish and micro fiber cloth. 3 7 Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the grounding-type plug. A grounding type plug has two blades and a third grounding prong. The third prong is provided for your safety. If the provided plug does not fit into your outlet, consult and electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
    [Show full text]
  • Project #2014-13 AUDIO VISUAL UPGRADE PROJECT SPECIFICATIONS
    Project #2014-13 AUDIO VISUAL UPGRADE PROJECT SPECIFICATIONS (Dated: September 19, 2014) Village of Irvington 85 Main Street Irvington, NY 10533 Tel: (914) 591-4356 Fax: (914) 591-4072 Web Site: WWW.IRVINGTONNY.GOV September 19, 2014 Audio Visual Upgrade Project Contract No. 2014-13 DIVISION #0: BIDDING AND CONTRACT REQUIREMENTS SECTION #AB: NOTICE TO BIDDERS VILLAGE OF IRVINGTON AUDIO VISUAL UPGRADE PROJECT WESTCHESTER COUNTY NEW YORK CONTRACT NO 2014-13 A. NOTICE TO BIDDERS 1. Bids will be received by the Village Clerk of Irvington until 11:00 a.m. on October 29, 2014 at the Village Hall, 85 Main Street, Irvington, New York 10533 for Contract No. 2014-13. Sealed bids can be mailed or delivered to Brenda Jeselnik, Clerk/Treasurer for receipt on or before the bid date/time. 2 Attention of bidders is called to the requirements as to conditions of employment to be observed and minimum wage rates to be paid under the contract. The bidder to whom a contract is awarded will not be required to furnish performance or payment bonds. 3 Plans, specifications and all information relative thereto may be secured at the Irvington Village Hall, Administrator’s Office, 85 Main St, Irvington, NY on online at www.irvingtonny.gov. The Village will not be responsible for full or partial sets of contract documents, including any addenda obtained from any other source. The Board of Trustees reserves the right to waive any formalities and to reject any or all bids. Village of Irvington Brenda M. Jeselnik Clerk/Treasurer September 19, 2014 Audio Visual Upgrade Project Contract No.
    [Show full text]
  • Department of Backstage and Infrastructure Management Introduction to Transmission Cables
    Department of Backstage and Infrastructure Management Introduction to Transmission Cables XLR to XLR The XLR connector is a style of electrical connector, primarily found on professional audio, video, and stage lighting equipment. The connectors are circular in design and have 3 pins. XLR connectors are available in male and female versions in both cable and chassis mounting designs, a total of four styles. This is slightly unusual as many other connector designs omit one of the styles (typically a chassis mounting male connector). The female XLR connectors are designed to first connect pin 1 (the earth pin), before the other pins make contact, when a male XLR connector is inserted. With the ground connection established before the signal lines are connected, the insertion (and removal) of XLR connectors in live equipment is possible without picking up external signals (as it usually happens with, for example, RCA connectors). Three-pin XLR connectors are by far the most common style, and are an industry standard for balanced audio signals. The great majority of professional microphones use the XLR connector. In previous years, they were used for loudspeaker connections. Three-pin XLR connectors are used to interconnect powered speakers with line-level signals. This use is commonly seen PA system applications and seems to be growing more common. Five to Five, Five to XLR(Male/Female) This is actually a 6.5 mm connector but we, here at backstage, call it 5mm for ease of communication. This is a multipurpose cable. This type of cable is majorly used to connect electronic equipments to the mixer board e.g.
    [Show full text]
  • Instrument Cable for Uncompromising Road Use
    1 2 Cables & Stands Catalogue CABLES 5 STAR SERIES ...... 8-20 4 STAR SERIES ...... 22-38 3 STAR SERIES ...... 40-55 PROCAB CABLE ...... 56-69 POWER & HYBRID ...... 70-80 BULK CABLE ...... 82-101 MULTICORE CABLE ...... 102-117 CABLE DRUM & STAGE BOX ...... 118-127 CONNECTOR ...... 128-157 STANDS SPEAKER STANDS ...... 158-166 MICROPHONE STANDS ...... 168-175 LIGHTING STANDS ...... 176-783 LAPTOP STANDS ...... 184-187 KEYBOARD STANDS ...... 188-191 GUITAR STANDS ...... 192-195 MUSIC STANDS ...... 196-201 MUSIC LIGHTS ...... 202-211 MISCELLANEOUS ...... 212-217 SPEAKER TOP HATS ...... 218-221 ABOUT THE ADAM HALL GROUP The Adam Hall Group is a leading German manufacturing and distribution company providing event technology solutions around the globe to a diverse portfolio of business customers, including music instrument retailers and dealers, live event and rental companies, broadcast studios, AV and system integrators, private and public enterprises, and industrial flightcase manufacturers. The company offers a wide range of professional audio and lighting technology as well as stage equipment and flightcase hardware under its brands LD Systems®, Cameo®, Gravity®, Defender®, Palmer® and Adam Hall®. Founded in 1975, Adam Hall Group has developed into a collection of modern, innovative event technology companies. This includes an 8,000 square metre warehouse and logistics centre at the corporate headquarters near Frankfurt am Main, Germany. ADAM HALL GROUP BRANDS DISTRIBUTION BRANDS SOUND LIGHT STAGE HARDWARE TECHNOLOGY TECHNOLOGY EQUIPMENT FOR FLIGHTCASES EVENT TECHNOLOGY – IT´S A PEOPLE BUSINESS Whether you are a music instrument retailer, live event & rental company, broadcast studio, system integrator, installer, public or private enterprise, or an industrial fightcase manufacturer, we are excited to show you the latest in event technology, award-winning innovation, top quality brands, and our superior commitment to service and satisfaction.
    [Show full text]
  • B403 20090807 AVP Universal Bulkhead.Cdr
    MODEL UNIVERSALUNIVERSAL PANELPANEL SYSTEMSYSTEM UNIVERSAL BULKHEAD PANEL SYSTEM • Design your own bulkhead • Extensive selection of connector modules • 1RU, 2RU & 3RU, 16 & 12 position available Model WK-U216E2-Z • Strain relief cable bar is standard with optional Connector Kits Model WK-U116E1-Z 2RU version shown above Model WK-U212E2-Z 2 RU Side View Model WK-U112E1-Z 6.00” [15.24] 1 RU Full List of Universal Connector Kits on the Rear www.amt.com Insulated Bulkhead Modular Bulkhead Universal Connector Kits Ordering Information Model Description Universal Panel - Panel with Cable Bar Only; no Connectors, no Adaptor Plates, no Cover Plates WK-U216E3-Z 3RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U216E2-Z 2RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U116E1-Z 1RU, 1x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U212E3-Z 3RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U212E2-Z 2RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors Ordering Information WK-U112E1-Z 1RU, 1x12 Universal Panel, Panel & Cable Bar Only, No Connectors Model Description BUILD3 3 RU Assembly of connectors to panel BUILD2 2 RU Assembly of connectors to panel Connector Kits, kits include all components necessary to mount connector to panel BUILD1 1 RU Assembly of connectors to panel Data, Network UDB9-CF DB9 Female, crimp pin contacts, adaptor plate(s), hardware Ordering Information UDB9-CM DB9 Male, crimp pin contacts, adaptor plate(s), hardware Model Description UDB9-SF DB9
    [Show full text]
  • 1-1 Sommercablev6.1-Premadeforeventindustry2016.Pdf
    204 PREMADE CABLES www.sommercable.com · [email protected] TABLE OF CONTENTS PREMADE CABLES CABLES FOR MUSICIANS • Microphone cables . 206 • Instrument & guitar cable. 209 • Guitar cables “Vintage Style“ . 212 • OFFROAD-SERIES MICROPHONE, instrument & speaker cables. 213 • Guitar cables . 214 • Guitar hybrid cables . 216 • Guitar/keyboard cables . 218 • Pocket transmitter cables . 218 • Stereo keyboard cables. 219 • Speaker cables . 220 CABLES FOR PROFESSIONAL DJS • Toslink cables . 221 • RCA cables. 221 • RCA patch cables . 222 • Microphone cables . 223 • Instrument cables . 223 • MP3 player & headset cables. 223 • Computer monitor cables. 223 CABLES FOR THE EVENT INDUSTRY • Microphone cables . 224 • AES/EBU & DMX. 226 • Load + DMX. 228 • Loudspeakers + power, EN3. 230 • Twisted Pair CAT.7 . 231 • Speaker cables . 236 • Road adapters & attenuators. 237 • Power supply . 238 PREMADE CABLES CABLES FOR STUDIO APPLICATIONS • Microphone cables . 242 • Patch/insert cables: Mini XLR, Mini jack, TT phone, B gauge . 243 • Stereo split cables . 248 • MIDI cables . 249 • AES/EBU & DMX. 250 • Digital FOC . 250 • S/P-DIF 75 Ω . 251 • Studio looms. 252 CABLES FOR BROADCASTING APPLICATIONS • Microphone cables . 260 • Patch/Y-patch/adapter cables . 262 • Multipairs audio AES/EBU . 263 • Studio looms. .264 • Video cables . 266 • Patch cables DS connectors. 266 • Video patch cables HDTV . 267 • HD camera cables SMPTE311M. 268 • Triax cables . 269 • Video multicores. 270 CABLES FOR MEDIA TECHNOLOGY – CONFERENCE – HOME • NF phono cables . 272 • Subwoofer cables . 272 • Antenna cables . 272 • S-VHS cables . 273 • Scart cables . 274 • Video multicores. 275 • Monitor cables. 276 • Multimedia cables HDMI . 280 • Firewire. 281 • Displayport, USB . 282 • Twisted Pair CAT.5e/CAT.6/CAT.7. 284 • FOC patch cables & FOC drum systems .
    [Show full text]