Waterside Metal Art Supplies Price List Aug 2020 Items Price Incl GST

Waterside Metal Art Supplies Price List Aug 2020 Items Price incl GST TURKISH IMPORTS Forged Anvil 75kg 1,465.00 Forged Anvil 50kg 975.00 Forged Anvil 35kg 685.00 Forged Anvil 20kg 420.00 AnvilVice/Anvillo 440.00 Leg Vice 150mm 620.00 Drill Press Vice 125 135.00 Lever Clamps (300 * 140) 66.00 G Clamps (160mm) 16.00 G Clamps (200mm) 17.00 G Clamps (300mm) 18.00 F Clamps (300mm), drop forged 43.00 F Clamps (500mm), drop forged 51.00 F Clamps (1000mm), drop forged 68.00 Cold Chisels 25cm 27.00 Cold Chisels 35cm 29.00 Point Chisel 15.00 Snips Right Cut, Green 15.00 Snips Left Cut, Red 15.00 Snips Straight Cut, Yellow 15.00 Cross Pein Hammer 200G (Machinist) 14.00 Cross Pein Hammer 300G (Machinist) 17.00 Cross Pein Hammer 500G (Machinist) 24.00 Cross Pein Hammer 1000G (Machinist) 38.00 Cross Pein Hammer 1.5KG (Machinist) 49.00 Cross Pein Hammer 2KG (Machinist) 57.00 Copper Hammer 400g 50.00 Bender Short 10mm 12.00 Bender Short 12mm 15.00 Waterside Metal Art Supplies Price List Aug 2020 Items Price incl GST GERMAN IMPORTS Swage Block 350 x 350 1,492.00 Swage Block 400 x 400 2,571.00 Anvil 100kg model 57 2,662.00 Anvil 100kg model 58 3,073.00 Anvil 150kg model 57 3,914.00 Anvil 150kg model 58 4,607.00 Anvil 210 kg model 58 5,990.00 leg vice 150mm 780.00 Silversmith anvil 155.00 Cone mandrel large 2,946.00 Cone mandrel small (hardie tool) 95.00 Sledge Hammer 6kg with hickory handles 146.00 Sledge Hammer 4kg Sledge Hammer 3kg 82.00 Schmiedehammer 750g 67.00 Schmiedehammer 1kg 80.00 Schmiedehammer 1.25kg 85.00 Schmiedehammer 1.5kg 90.00 Schmiedehammer 2kg 95.00 Top plane hammer 70mm 162.00 Set hammer 50mm 118.00 Top fuller 5mm 110.00 Top fuller 10mm 114.00 Top fuller 15mm 123.00 Top fuller 20mm 128.00 Top fuller 25mm 141.00 Bottom fuller 5mm 88.00 Bottom fuller 10mm 90.00 Bottom fuller 15mm 99.00 Bottom fuller 20mm 108.00 Bottom fuller 25mm 128.00 Top Swage 10mm 133.00 Top Swage 15mm 141.00 Top Swage 20mm 145.00 Top Swage 25mm 155.00 Bottom Swage 10mm 108.00 Bottom Swage 15mm 122.00 Bottom Swage 20mm 127.00 Waterside Metal Art Supplies Price List Aug 2020 Items Price incl GST Bottom Swage 25mm 154.00 Round punch 10mm 108.00 Round punch 15mm 125.00 Round punch 20mm 151.00 Round punch 25mm 163.00 Hot set 1kg 86.00 Hot set 1.5kg 103.00 Hardie tool: hot cut 95.00 Flat Mouth Tong 300mm 47.00 Flat Mouth Tong 400mm 58.00 Flat Mouth Tong 500mm 70.00 Wolfs Jaw Tong 300mm 63.00 Wolfs Jaw Tong 400mm 71.00 Wolfs Jaw Tong 500mm 85.00 Wolfs Jaw Tong 600mm 108.00 Square Tong 300mm 70.00 Square Tong 400mm 83.00 Square Tong 500mm 96.00 Pick-up Tong 300mm 46.00 Pick-up Tong 400mm 58.00 Pick-up Tong 500mm 72.00 Döpper tong 300mm 47.00 Döpper tong 400mm 57.00 Döpper tong 500mm 66.00 Rivet tong 400mm 56.00 Rivet tong 500mm 72.00 POLISH IMPORTS anvil 2horn, 75kg 2,035.00 anvil 2horn, 100kg 2,445.00 anvil 1horn, 90kg 2,020.00 anvil 1 horn, 100kg 2,200.00 Waterside Metal Art Supplies Price List Aug 2020 Items Price incl GST PAKISTANI IMPORTS Scrolling tong 266mm 40.00 Scrolling tong 420mm 46.00 V-bit bolt tong 1/4 (6mm), 368mm 54.00 V-bit bolt tong 3/8 (10mm), 368mm 54.00 V-bit bolt tong 1/2 (13mm), 368mm 54.00 V-bit bolt tong 5/8 (16mm), 15mm 59.00 V-bit bolt tong 3/4 (19mm), 375mm 59.00 Nail header 1/4 (6mm) 63.00 nail header 3/8 (10mm) 63.00 Nail header 5/16 (8mm) 63.00 Hardie tool: cone mandrel, 25mm hardie hole 54.00 Hardie Tool: hot cut, 22mm hardie hole 50.00 cross pein 56.00 AUSTRALIAN SOURCED AND INHOUSE PRODUCED Waterside T-shirt, XS / S / M 25.00 Stubby Holder 5.00 Coke Peanut 17L bag 27.00 Anvil Stand, Waterside 750.00 Plywood spacers 12.00 Portable forge 700.00 blower EB80, 240 Volt, 0.40 Amps 220.00 Coat hanger 145.00 Log crate 575.00 Fire Tools: poker 40.00 Fire Tools: brush 55.00 Fire Tools: shovel large 60.00 Fire Tools: tongs 100.00 SECOND HAND Wrought iron / kg 25.00 TOTAL.

Copy Link

Recommended publications

MABA Newsletter Index January 1980 Thru December 2020
MABA Newsletter Index January 1980 thru December 2020 This searchable index will help you locate what year & issue projects and information have been published in the MABA newsletter, The Upsetter, over the past 40 years. It is divided into 37 categories to help you quickly narrow your search or use the PDF “Find” function. Sometimes an article fits into more than one category so it has been placed under the most obvious location, while occasionally being placed under multiple categories. The demonstrator, not necessarily the author of the article, is listed to identify and/or credit the source of the information. Please forward any comments or corrections to the MABA newsletter editors. Dates of newsletters that were not available for inclusion in this index: May – June 1995; November – December 1995; If anyone has copies of these newsletters and could pass on the contents so they can be added to this index, it would be greatly appreciated. Look over the entire index and note the categories that have a lot of entries, and those that have only a few. Have you been to a demonstration; solved a problem; completed a project; made a jig, fixture or tool that you’d want to share with others? Would a write-up help other smiths get their projects done without going through the problems you’ve had? Where do your blacksmithing interests lie? Are there many entries in your area of interest? Would an article about your area of interest create some excitement about the subject? Please consider contributing an article to the Upsetter and passing along your experience and information to the MABA membership.
[Show full text]
Report Documentation Page Information
Report Documentation Page Information Title and Subtitle: AISI/DOE Technology Roadmap Program TRP 9742: Removal of Residual Elements in the Steel Ladle by a Combination of Top Slag and Deep Injection Practice Authors: S. Street, K. S. Coley and G. A. Iron Performing Organization McMaster University Department of Materials Science and Engineering 1280 Main Street Hamilton, Ontario L8S 4L7 Canada Abstract The objective of this work was to determine if tin could be removed from liquid steel by a combination of deep injection of calcium and a reducing top-slag practice. Calcium forms an intermetallic with tin, CazSn, but it is much less stable than CaO or Cas. The premise of the proposal was that the intermetallic could be formed during deep injection, and prevented from rapidly reverting to the steel by maintaining reducing conditions in the top slag. The work consisted of three types of experiments: 1. Injection of calcium wire into 35-kg heats melted in an induction furnace to study the kinetics of tin removal under various conditions of temperature, oxygen activity and sulphur content. 2. A program to study the solubility tin in the slag as a function of oxygen potential, temperature and slag composition. 3. Two full-scale plant trials were carried out at Dofasco Inc. as a result of the promising results from the laboratory studies. In the injection into the induction furnace, it was found that 7 to 50% of the tin was removed from initial tin contents of 0.1% Sn, using 8 to 16 kg calciudtonne steel. The extent of tin removal was found to increase with greater calcium injection, lower oxygen activity in the steel and lower temperature.
[Show full text]
MSL Engineering Limited Platinum Blue House 1St Floor, 18 the Avenue Egham, Surrey, TW20 9AB
SMR Final Report 121404 Purpose of Issue Rev Date of Issue Author Agreed Approved Issued for information 0 Aug 2004 SM Issued for internal comment 1 November 2004 AFD DJM JB Issued as Final Report 2 December 2004 AFD DJM JB This Final report has been reviewed and approved by the Mineral Management Service. Approval does not signify that the contents necessarily reflect the views and policies of the Service, nor does mention of trade names or commercial products constitute endorsement or recommendation for use. This study was funded by the Mineral Management Service, U.S. Department of the Interior, Washington, D.C., under Contract Number 1435-01-04-CT-35320 ASSESSMENT OF REPAIR TECHNIQUES FOR AGEING OR DAMAGED STRUCTURES Project #502 DOC REF C357R001 Rev 1 NOV 2004 MSL Engineering Limited Platinum Blue House 1st Floor, 18 The Avenue Egham, Surrey, TW20 9AB Tel: +44 (0)1784 439194 Fax: +44 (0)1784 439198 E-mail: [email protected] C357R001Rev 2, December 2004 MMS Project #502 NUMBER DETAILS OF REVISION 0 Issued for information, August 2004 1 Issued for comment, November 2004. Extensive revisions throughout, including restructuring of report. 2 Issued as Final Report, December 2004. Conversion table added, Figure showing clamp details to avoid added, and general editorial revisions. C357R001Rev 2, December 2004 MMS Project #502 Assessment of Repair Techniques for Ageing or Damaged Structures By Dr. Adrian F Dier MSL Services Corporation Final Project Report: ASSESSMENT OF REPAIR TECHNIQUES FOR AGEING OR DAMAGED STRUCTURES MMS Project Number 502 November 2004 C357R001Rev 2, December 2004 i This Final report has been reviewed a nd approved by the Mineral Management Service.
[Show full text]
Now Selling Multi-Tool Brand Products April 2019 Edition
Brass Brushes Candle Cups Modern Tools forFire PlacetheShoModernvel Blanks Blacksmith Monkey Tool Sets Stanley Tape Measures Aviation Snips Stainless Steel Rulers Silver Marking Pencils Transfer Punch Sets Lamp Parts Letter/Number Punch Sets Brass Sheet Flap Disk Safety Supplies Cutoff Wheels Blacksmith Videos/DVD’s Sanding/Grinding Disk ...and much more! Chisels Vise Grips Block Brushes Handle Brushes www.blacksmithsupply.com P.O. Box 3766 Chester,VA 23836 1-804-530-0290 Now Selling Multi-Tool Brand Products April 2019 Edition Prices are subject to change with no notice. Blacksmith Supply LLC is not responsible for printing errors or omissions. We make every effort to stock items, but from time to time backorders will occur. We reserve the right to limit quantities. Limitation of Liability: Blacksmith Supply LLC does not accept liability beyond the remedies set forth herein, including but not limited to any liability for product not being available for use. Lost profits, loss of business, except as expressly provided herein, Blacksmith Supply LLC will not be liable for any consequential, special, indirect or punitive damages, even if advised of the possibility of such damages, or for any claim by any third party. You agree that for any liability related to the purchase of the product, Blacksmith Supply LLC is not liable or responsible for any amount of damages above the amount invoiced for the applicable product. Notwithstanding anything in this agreement to the contrary, the remedies set forth in this agreement shall apply even if such remedies fail their essential purpose. Return Policies / Exchanges: You must contact us directly before you attempt to return Product to obtain a Return Material Authorization Number for you to include with your return.
[Show full text]
Manufacturing Processes by H.N. Gupta.Pdf
This page intentionally left blank MANUFACTURING PROCESSES (SECOND EDITION) H.N. Gupta B.Sc., G.I. Mech.E (London), FIE Visiting Professor Department of Mechanical Engineering I.E.T., Lucknow, U.P. Technical University R.C. Gupta B.Sc., B.E., M.Tech., Ph.D. Professor and Head Department of Mechanical Engineering I.E.T., Lucknow, U.P. Technical University Arun Mittal Senior Faculty Department of Mechanical Engineering I.E.T., Lucknow, U.P. Technical University Copyright © 2009, New Age International (P) Ltd., Publishers Published by New Age International (P) Ltd., Publishers All rights reserved. No part of this ebook may be reproduced in any form, by photostat, microfilm, xerography, or any other means, or incorporated into any information retrieval system, electronic or mechanical, without the written permission of the publisher. All inquiries should be emailed to [email protected] ISBN (13) : 978-81-224-2844-5 PUBLISHING FOR ONE WORLD NEW AGE INTERNATIONAL (P) LIMITED, PUBLISHERS 4835/24, Ansari Road, Daryaganj, New Delhi - 110002 Visit us at www.newagepublishers.com Preface to the Second Edition The authors of the book ‘‘Manufacturing Processes’’ are thrilled at the speed with which the first edition of the book has been snapped up and exhausted within four months of its publication necessitating a reprint. This proves that the book has been found useful both by teachers and the students. This is extremely gratifying. It has been felt that to make the text of the book even more useful, certain changes have been made. Therefore the text of the Unit I and Unit IV has been completely rewritten in the second edition of the book.
[Show full text]
Price List 2013
VAUGHANS (HOPE WORKS) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications Baker House, The Hayes, Lye, Nr Stourbridge, West Midlands, DY9 8RS Telephone: 01384 424232 Fax: 01384 893171 E-mail: [email protected] Website: www.anvils.co.uk PRICE LIST 2013 Approved Suppliers to British & Most Overseas Government & Aided Programmes Including World Bank United Nations VAUGHANS (HOPE WORKS) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications Baker House, The Hayes, Lye, Nr Stourbridge, West Midlands, DY9 8RS Telephone: 01384 424232 Fax: 01384 893171 E-mail: [email protected] Website: www.anvils.co.uk TERMS & CONDITIONS PRICES: All prices shown are GBP £’s Sterling & ex-works POST & PACKAGING: Extra DELIVERY: Extra V A T: At Current Rate EXPORT: Packing and Delivery F O B Charged Extra ACCEPTANCE: All Orders Accepted Subject to Prices Ruling at Date of Despatch Unless Previously Agreed in Writing CANCELLATION: Orders Cancelled may be Subject to a Cancellation Charge RETURNS: A Handling Charge of 20% will be Charged (If Returns are Accepted) SPECIFICATIONS: The Right is Reserved to Add, Delete or Change the Specification of any Item at Any Time Without Prior Notice. All Dimensions are Approximate Due to the Hand Made Nature of Many of the Products. PAYMENT TERMS: Credit Account – Strictly 30 Days Nett Non Credit Accounts – Payment by Proforma or Mastercard, Visa, Switch, Delta, Solo N B: Sizes Other Than Those in the Price List can be Manufactured – Prices on Application 1 Email –
[Show full text]
2%---E. Elttozve 4
F. E., SUTHERLAND, POWER HAIRIER, APPLICATION FILED JUNE 23, 1908, 95 3,768. Patiented Apr. 5, 190. 6 SHEETS-SHEET 1. (Willtri In 3. af - : - 2ara t 2%----e. elttozve 4. F. E. SUTHER AND. POWER HAMMER, APPLICATION FILED JUNE 23, 1908. attented Apr. 5 s 190, 6 SEEETS-SIEE 2, as B. gpaha co, Photo-ThagRAPHERS, WASH:histor, D.C F. , E, SUTHER LAND, POWER HAMMER, APPLICATION FILED JUNE 23, 1908, 6 SHEETS-SEEET 3. sur W - - -2 t is: SES 92) tycosea 24 25 27 2 st -- a A.Rze?. a 2 ezza ce 22:22-reer9. A 2. 42%2 5-2-2-2-2C -éa2-17 2a2a --- Asia. &lttotviad anorew s. arshak co. Photo-LittlegraphERS WASinGior. O. F, E, SUTHERLAND, POWER HAMMER, APPLICATION FILED JUNE 23, l903. Patiented Apr. 5, 1910, 6 SHEETS-SEEE 4. 2673 - oeeee-2-c. news granam co. Photo-LTHOSRAPERS WASHINGTON. D. c. F, E, SUTHERLAND, POWER HAMMER, APPLICATION FILED JUNE 23, 1908, 953,768. Patented Apr. 5, 1910, 6 SHEETS-SHEET 5. S SN A //es es g 'ais | afgangll 7 36 2. “ e s - - g: sagas m m -- 23 T &ltiovvi of F. E. SUTHERLAND. POWER HAMMER, APPLICATION FILED JUNE 23, 1908, 953,768, Patented Apr. 5, 1910. 6 SHEETS-SEE 6 Wis 3 SZAZSesaac Dresis. GRAHA (30. Piots. Hocrapers, wasiyston, 9. UNITED STATES PATENT OFFICE. FRED E. SUTEERLAND, OF LOS ANGELES, CALIFORNIA, ASSIGNOR, BY DIRECT AND IVIESNE ASSIGNINIENTS, TO THE RADTAT, POWER HAMMER, COMPANY, OF LOS ANGELES, CALIFOR, NIA, A. CORPORATION OF CALIFORNIA. (WER-HA1VER. 953,368. Specification of Letters Patent, EPatented Apr.
[Show full text]
Forging Process
Forging Process Madan Lal Chandravanshi Assistant Professor Department of Mechanical Engineering I S M Dhanbad Deformation Process Permanent (plastic) deformation of a material under tension, compression, shear or a combination of loads. Types of Deformation Bulk flow in (3) dimensions Simple shearing of material Compound to simple bending Combination of above Deformation Process Stresses used to produce change Tension Compression Shear Combination in multiple axis (2) Classifications Bulk = Significant change in surface area, thickness and cross section reduced, and overall geometry changed. Sheet = Some deforming of material, but initial material thickness remains the same Definition of Hot Work vs. Cold Work HW is performed above the recrystallization temp of the material and CW is done below the recryllization temp of the material. Recystallization Temp- “The approximate minimum temperature at which complete grain growth and rearrangement of molecules of a worked metal occurs within a specified time.” Approximate temperature ranges HW- .6 melt temp. CW - less than .3 melt temp. Hot Working When HW a metal is in a plastic state and is easily formed. The forces required to deform the metal are less than CW. Some mechanical properties of the metal are improved due to process characteristics. At elevated temperatures, metal microstructures are rebuilding continually through the re-crystallization process which allows for much higher deformation. Advantages to HW Porosity in metal is largely eliminated Impurities
[Show full text]
Feb 2019 Catalog.Indd
World’s Finest Blacksmith Tools and Equipment at the Best Prices www.blacksmithsdepot.com Kayne and Son 100 Daniel Ridge Road Candler NC 28715 (828) 667-8868 or 665-1988 ***All Prices Subject to Change *** www.customforgedhardware.com All visits by appointment only PLEASE CALL FIRST Directions from the East (Asheville): Take I-40 West to Exit 44. Turn right at the end of the exit ramp on US-19/23. Go to the 4th traffic light (approx. 1.9 mi.) Turn right onto Asbury Rd. and go to end of Asbury Rd. (approx 1.6 mi.) Turn left onto Monte Vista Rd. to 2nd road on right (approx. 0.3 mi.) Turn Right onto Daniel Ridge Rd. Blacksmiths Depot is #100 on right (approx 0.6 mi.) Directions from the West (Canton): Take I-40 East to Exit 37. Turn right at end of exit ramp to traffic light Turn left on US-19/23 Go to 2nd traffic light (approx. 3.9 mi.) Turn left onto Dogwood Rd. to flashing traffic light (approx. 1.1 mi.) Turn right onto Monte Vista Rd and go to Daniel Ridge Rd. (approx. 1 mi.) Turn left onto Daniel Ridge Rd. Blacksmiths Depot is #100 on right (approx 0.6 mi.) Prices Subject to Change * Check website or call for latest pricing. We are happy to provide the information to help Holcombe you make a decision on the tools you need or Meadows want. Holcombe Woods Prices do not include shipping. Pictures are not to scale. Stock photos may be used. Colorations may vary from pictures.
[Show full text]
2008 Catalog Web.Indd
To our Customers and Friends: Welcome to our summer 2008 Farrier and Blacksmithing Sourcebook – your one stop shop for all of your needs. Our brand new inventory system means that we are in stock for fast delivery to you – what you need when you need it – right now. You’ll find the world of farrier and blacksmith products right here at your fingertips with the exceptional service you’ve come to expect from us. Visit our website, www.centaurforge.com, for the most up to date collection of new products and all of the tools and supplies you need every day. While you’re there, you can review and track current and past orders, and save items in a wish list. And, of course, at years end, we will provide you a year end accounting of all of your purchases for your own accounting use. Our clinics and seminars have grown in both frequency and popularity in Texas and Wisconsin. Look for exciting announcements of upcoming events on the website! Send us your suggestions for new clinics and seminars! We are always looking for new ideas to bring value to our customers. Special orders for hard to find tools? No problem. Give us a call and we’ll source it for you and get it to your door fast. When you need it. In this time of rapid acceleration in energy prices and steel costs, (we have already had two steel-relat- ed price increases from several manufacturers in the last 3 months) we are working hard to keep the products you need for your livelihood affordably priced and economically delivered.
[Show full text]
Black Smithy Shop Faculty Name: Arpit Srivastava Assistant Professor Deptt
Black Smithy Shop Faculty Name: Arpit Srivastava Assistant Professor Deptt. Of Engineering UPTTI, Kanpur •black" in "blacksmithy" refers to the black fire scale, a layer of oxides that forms on the surface of the metal during heating • The word "smith" derives from an old word, "smite" (to hit) Topics to be Covered Introduction Forging materials Heating Devices Hand Tools and Appliances Smith Forging Operations Forging Process Defects in Forging Black Smith or forging :work involves heating of metal stock to a desired temperature, enable it to acquire sufficient plasticity, followed by the operations like hammering, bending, pressing etc, to get desired shape and size. Blacksmiths produce objects such as gates, grilles, railings, light fixtures, furniture, sculpture, tools, agricultural implements, decorative and religious items, cooking utensils, and weapons. • Hand forging: done by hand tools. • Power Forging: done by power hammers. • Drop forging: done by drop hammers. • Machine forging: done by forging machines. Forging • “Forging is defined as the controlled plastic deformation of metal into predetermined shapes by pressure or impact blows, or combination of both.” • “Forgeability is the relative ability of a material to deform under a compressive load without rupture.” Grain Structure • Parts have good strength • High toughness • Forgings require additional heat treating grain flow (a) casting (b) machining (c) forging Forging Materials Any metal or alloy which can be brought into plastic stage through heating can be forged. Means those material which have ductile or malleable property. Like wrought iron, carbon steel, stainless steel, copper based alloys, nickel-copper alloys, magnesium alloys etc. Forging Materials 1. Aluminium alloys 7.
[Show full text]
Making Wire and Tube by Gary Wooding, 2007
Making Wire and Tube by Gary Wooding, 2007 Draw-plates Draw-plates are ancient devices used for reducing the diameter of wire, and consist of a tapered hole in a hard plate; their first recorded use can be traced back to 3000BC in Egypt. Fig 3-A shows the shape of a typical hole. The small hole determines the cross section of the wire and the transition from the tapered to parallel hole is smoothly rounded. Wire slightly larger than the small hole is “funnelled” into it by pulling or “drawing”, as shown in Fig 3-B. They are not restricted to round holes; holes of almost any shape are possible. The plate is usually made of hardened steel, but more durable (and more expensive) ones contain TC (tungsten-carbide), or even diamond, inserts. The most common form contains a series of numbered holes of slightly different sizes, arranged Photo 1 so that after pulling wire through one hole it is of a size suitable for feeding into the next smaller one. The numbers just identify the holes and have no connection with the actual size. Where a great deal of wire making is done it is more usual to have many plates each containing just one hole. Photo 1 shows a selection of draw-plates: the largest measures 270x50mm. All are of normal hardened steel except D and F which have TC inserts, and all except B, E and H are for standard round wire. B and H are for “D” section wire, and E has an assortment of shapes: square, “D”, triangular, hexagonal, and round.
[Show full text]