VAUGHANS (HOPE WORKS) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
Baker House, The Hayes, Lye, Nr Stourbridge, West Midlands, DY9 8RS Telephone: 01384 424232 Fax: 01384 893171 E-mail: sales@anvils.co.uk Website: www.anvils.co.uk
PRICE LIST 2013
Approved Suppliers to British & Most Overseas Government & Aided Programmes Including World Bank United Nations
VAUGHANS (HOPE WORKS) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
Baker House, The Hayes, Lye, Nr Stourbridge, West Midlands, DY9 8RS Telephone: 01384 424232 Fax: 01384 893171 E-mail: [email protected] Website: www.anvils.co.uk
TERMS & CONDITIONS
PRICES: All prices shown are GBP £’s Sterling & ex-works
POST & PACKAGING: Extra
DELIVERY: Extra
V A T: At Current Rate
EXPORT: Packing and Delivery F O B Charged Extra
ACCEPTANCE: All Orders Accepted Subject to Prices Ruling at Date of Despatch Unless Previously Agreed in Writing
CANCELLATION: Orders Cancelled may be Subject to a Cancellation Charge
RETURNS: A Handling Charge of 20% will be Charged (If Returns are Accepted)
SPECIFICATIONS: The Right is Reserved to Add, Delete or Change the Specification of any Item at Any Time Without Prior Notice. All Dimensions are Approximate Due to the Hand Made Nature of Many of the Products.
PAYMENT TERMS: Credit Account – Strictly 30 Days Nett Non Credit Accounts – Payment by Proforma or Mastercard, Visa, Switch, Delta, Solo
N B: Sizes Other Than Those in the Price List can be Manufactured – Prices on Application
1 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
BLACKSMITHS & TINSMITHS 3 – 59
FOUNDRY & FABRICATIONS 60 – 83
FARRIERS 84 - 90
2 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S1 Kgs Cwt Pric e SINGLE BICK ANVIL 5.0 85.50 12.7 178.50 (London Pattern) 18.1 192.83 25.4 238.25 Solid steel Anvil for 38.1 357.16 supporting hot metal as it 45.4 397.51 is being hammered 50.8 1 cwt 436.26 63.5 1.1/4 cwt 488.30 76.2 1.1/2 cwt 619.80 88.9 1.3/4 cwt 687.55 101.6 2 cwt 789.50 127.0 2.1/2 cwt 1,002.25 152 3 cwt 1,168.50 177.8 3.1/2 cwt 1,329.80 203.2 4 cwt 1,530.80 228.6 4.1/2 cwt 1,680.90 254.0 5 cwt 1,956.68
SINGLE BICK ANVIL SIZES Sqr Rnd Wt A B C D E F (See Diagram BT1 Below) Hole Hole Kgs Ins Ins Ins Ins Ins Ins Ins Ins 5.0 9.3/8 6 1.7/8 4.1/4 4.3/8 3.3/4 ½ ¼ 12.7 12.1/4 7.1/2 2.5/8 6.3/8 6 5.3/4 5/8 3/8 18.1 15 10 3 6.7/8 7 6 5/8 3/8 25.4 15.1/8 9.1/2 3 7 7.3/4 7 ¾ 3/8 38.1 19.1/8 11.3/4 3.1/2 8.5/8 8 6.7/8 ¾ 3/8 45.4 20.1/2 12.1/2 3.1/2 9.14 9 7.1/2 ¾ 3/8 50.8 22.5/8 13.1/4 3.3/4 9.3/4 9.1/4 7.3/4 1.1/4 ½ 63.5 23.1/2 14 4.3/8 9.1/2 9.3/4 9.1/4 1.1/4 ½ 76.2 25.1/4 15 4 11 10.1/4 9.1/2 1.1/4 ½ 88.9 27 16.1/2 4.1/4 11.1/2 10.3/4 9.1/2 1.1/4 ½ 101.6 28 17 4.1/2 12 11.1/2 9.3/4 1.1/4 ¾ 127.0 30.1/2 18.3/4 4.3/4 13.1/2 13.1/2 12.1/2 1.1/4 ¾ 152.4 34.1/2 21 5 14 14 10 1.1/4 ¾ 177.8 36 22 5.1/4 14.1/2 14.3/4 11.3/4 1.1/4 ¾ 203.2 37 22.1/2 5.3/4 15 15.1/2 12.1/2 1.1/4 ¾ 228.6 36.1/2 22.1/4 5.3/4 16.1/2 15.3/4 13 1.1/4 ¾ 254.0 40 24.1/2 6.1/2 16 15.1/2 14 1.1/4 3/4
3 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S1F Pattern Kgs Price FARRIERS ANVIL American 38.1 499.28 Lye 38.1 539.86 Solid steel Anvil with special features used in the hand hammering of horseshoes
S1B Anvil to Suit Price ANVIL STAND 25.4 Kg 231.47 38.1 Kg 231.47 Cast iron structure to 45.4 Kg 255.15 support the Anvil 50.8 Kg 255.15 63.5 Kg 260.15 76.2 Kg 270.15 88.9 Kg 303.45 101.6 Kg 304.95 127.0 Kg 424.29 152.4 Kg P O A 177.8 Kg P O A 203.2 Kg 547.21 228.6 Kg 547.21 254.0 Kg 590.94
S3 MM Inches Price STAR STAKE PLATE 762 x 203 30 x 8 228.25
Cast iron plate with a range of star shaped holes to hold stakes in different vertical positions
S4 Plate to Suit Price STAR STAKE PLATE 30 x 8” 206.43
STAND
A support for the Star Stake Plate
4 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S6 Kgs Cwt Price DOUBLE BICK ANVIL 18.1 237.40 25.4 255.99 Solid steel Anvil for 38.1 362.88 supporting hot metal as it is 50.8 1 cwt 450.90 being hammered 63.5 1.1/4 cwt 545.21 101.6 2 cwt 810.50 177.8 3.1/2 cwt 1,380.80 254.0 5 cwt 1,996.05
DOUBLE BICK ANVIL SIZES WT A B C D G H L X 18.1 15 6.1/4 2.3/8 6.1/2 7 6.1/2 4.1/4 10.3/4 25.4 17 6.1/8 2.7/8 7.1/2 7.1/2 6.1/2 5.1/4 11.3/4 38.1 22 8.1/2 3.1/2 8 8 7 6.1/2 15.1/2 50.8 24 9 2.5/8 9.1/2 9.1/4 8.1/2 7.1/4 16.3/4 63.5 24.3/4 9.1/4 3.3/4 10 9.1/4 9.1/4 7.1/4 17.1/2 101.6 32 12.3/4 4.5/8 12.1/2 11.3/4 11 10.1/2 21.1/2 177.8 39.1/2 14.1/2 5.1/2 15 14.1/4 12.1/2 12.3/4 26.3/4 254.0 43.3/4 15.3/4 6.1/4 16.1/2 15.3/4 14 14.1/4 29.1/2 Sqr. Rnd WT Y Z Hole Hole 18.1 5.5/8 3.1/2 5/8 3/8 25.4 5.3/8 3.1/2 ¾ 3/8 38.1 7.1/4 4.1/2 1.1/4 3/8 50.8 7.3/4 4.1/2 1.1/4 ½ 63.5 8 5 1.1/4 ½ 101.6 11.1/2 5.1/2 1.1/4 ¾ 177.8 13.3/4 7 1.1/4 ¾ 254.0 14.1/2 8 1.1/4 ¾
5 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S10 Inches Price SWAGE BLOCK 9 x 9 x 3” 166.90 12 x 12 x 4” 258.75 Cast iron shape with a 12 x 12 x 4.1/2 P O A series of graduated shaped 13 x 13 x 6 P O A cavities used for finish 14 x 14 x 5 P O A shaping of hot metal usually 15 x 15 x 5 P O A with the aid of top swaging 18 x 18 x 6 P O A tools (see S33) 20 x 20 x 7 900.55
S11 Inches Price SWAGE BLOCK STAND 9 x 9 x 3 271.32 12 x 12 x 4” 333.55 Cast iron structure to 12 x 12 x 4.1/2 P O A support the Swage Block 13 x 13 x 6 P O A vertical and horizontally 14 x 14 x 5 P O A 15 x 15 x 5 P O A 18 x 18 x 6 P O A 20 x 20 x 7 586.79
S12 Inches MANDREL CONE Height x Top Dia. x Price Bottom Dia. Used to set and correct 18 x 6 x 2 375.50 rings after they have been 24 x 9 x 3 538.90 59 x 15 x 4 1,882.49 shaped and welded
6 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
BLACKSMITHS FIRE SET Description Price Rake 14.14 S13 –RAKE Poker 12.20 Shovel 17.06
S14 - POKER Awaiting Image
S15 – SHOVEL
For handling hot coke
S16 MM Inches Price CLOSE MOUTH TONGS 450 18 33.90 550 22 38.20 For gripping flat narrow section hot metal
S17 MM Inches Price OPEN MOUTH TONGS 450 18 Available in sizes 33.90 For gripping a given 6, 9 & 13mm thickness of hot metal 550 22 Available sizes 38.20 13,16, 19 & 25mm
S18 MM Inches Price HOLLOWBIT TONGS 450 18 Available in sizes 37.10 For gripping a given 6, 9, 13, 16 & 19mm diameter of round hot metal 550 22 Available in sizes 42.65 13 & 19mm
S18A MM Inches Price DIAMOND SQUARE 450 18 TONGS Available in sizes 37.10 9 & 16mm For gripping a given size of 550 x 19 22 x ¾ 42.65 square hot metal diagonally
7 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S19 MM Inches Price DOUBLE HOLLOWBIT 450 18 TONGS Available in sizes 38.20 6, 9, & 13mm For gripping a given 550 22 diameter of round hot metal Available in sizes 43.70 in both directions 6 & 13mm
S20 MM Inches Price BOLT TONGS 450 18 Available in sizes 37.10 For gripping given 6, 9, 13 & 16mm diameters of round hot 550 x 13 22 x ½ 42.65 metal (typically when forging bolts)
S21 MM Inches Price PICK UP OR DANDY 450 18 41.90 TONGS 550 22 46.90
For gripping unusual shapes of hot metal
S22 MM Inches Price UNIVERSAL TONGS 450 18 37.10 550 22 42.60 For gripping flat, thick, thin or round hot metal
S23 MM Inches Price SQUARE MOUTH TONGS 450 x 13 18 x ½ 47.80 450 x 16 18 x 5/8 48.50 For gripping given sizes of 550 x 19 22 x ¾ 61.20 hot metal
8 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S24 MM Inches Price SIDE MOUTH TONGS 450 18 Available in sizes 39.30 For gripping given 6, 13, 19, & 25mm thickness of hot metal at its 550 22 edges Available sizes 45.30 6, 13, 19 & 25mm
S25 Inches Price FLAT MOUTH TONGS 18 x 1 x ¼ 47.75 22 x 1 x ¼ 48.05 For gripping given sizes of 22 x 1 x ½ 62.15 hot metal sections
S26 MM Inches Price ROUND MOUTH TONGS 450 x 19 18 x ¾ 46.40 550 x 25 22 x 1 62.15 For gripping given diameters of hot metal (typically when forging shackles)
S27 MM Inches Price RIVET TONGS 450 18 Available in sizes 38.15 For gripping hot rivets side 6, 9, 13, & 19mm ways on 550 22 Available sizes 44.05 6, 9, 13, & 19mm
S28 MM Inches Price FARRIERS TONGS 380 15 MILD STEEL Available in sizes 22.10 6, 8, 9, 11, & 13mm For gripping given sizes of 450 18 horseshoes Available in sizes 33.60 6, 8, 9, 11, & 13mm 550 22 Available in sizes 38.70 6, 8, 9, 11 & 13mm
9 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S28S MM Inches Price FARRIERS TONGS 380 15 STAINLESS STEEL Available in sizes 52.90 For gripping given sizes of 6, 8, 9, 11, & 13mm horseshoes 450 18 Available in sizes 75.55 6, 8, 9, 11, & 13mm 550 22 112.50
S29 MM Inches Price BAND JAW TONGS 450 18 Available in sizes 39.30 For gripping given sizes of 6, 9 & 13mm hot metal in areas of 550 22 restricted access Available sizes 45.25 13, 19 & 25mm
S30 MM Inches Price ROUND SIDE MOUTH 450 18 TONGS Available in sizes 44.80 13, 19, & 25mm For gripping given 550 22 diameters of round hot Available sizes 50.25 metal in areas of restricted 13, 19 & 25mm access
S31 MM Inches Price BOW TONGS 450 18 Available in sizes 37.10 For gripping and dragging 25 & 38mm given diameters of round 550 22 hot metal Available sizes 42.65 51, 63 & 76mm
S32 Sizes Price BOTTOM SWAGE Available in 6, 9, 12, 42.00 16, 19, 22 & 25mm
Used with a Top Swage for reducing or drawing down round bar
10 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S33 Sizes Price TOP SWAGE Rodded Available in 6, 9, 12, 48.65 Used with a Bottom Swage 16, 19, 22 & 25mm for reducing or drawing Wooden Handle down round bar Available in 6, 9, 12, 48.98 16, 19, 22 & 25mm
S34 BOTTOM FULLER Sizes Price Available in 6, 9, 12, 38.50 Fits into anvil hardie hole 16, 19, 22 & 25mm
and is used with top tool to increase metal in length
S35 SQUARE FLAT SET HAMMER Sizes Price 38mm Rodded 46.40 Driven by a hammer – Ideal 38mm Wooden Handle 51.25 for fine flattening (eg. Head Only 20.54 Producing a defined shoulder on a stepped forging)
S36 SQUARE FLAT FLATTER Sizes Price For finishing wide surfaces 64mm Rodded 50.70 in conjunction with Anvil 64mm Wooden Handle 54.30 workface. Helps remove hammer markings
S37 Description Price HARDIES / CROPPERS 31mm Shank Hardie 27.25 Other Shanks Hardie 37.80 A cutting tool which fits into Shoe Cropper 37.80 the Anvil hole
11 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S38 Sizes Price TOP FULLER Rodded Available in 6, 9, 12, 51.90 Used with a bottom tool to 16, 19, 22 & 25mm quickly thin or lengthen hot Wooden Handle metal Available in 6, 9, 12, 49.72 16, 19, 22 & 25mm
S39 Sizes Price HOT SET 3LB Rodded 38.96 3LB Wooden Handle 44.63 To cut hot metal
S40 Sizes Price COLD SET 3LB Rodded 38.95 3LB Wooden Handle 44.65 To cut cold metal without blunting
S43 MM Inches Price FLAT CUT CHISEL 102 x 6 4 x ¼ 5.05 152 x 9.5 6 x 3/8 5.35 For detailed cutting of hot 203 x 13 8 x ½ 6.10 metal 203 x 16 8 x 5/8 6.40 254 x 19 10 x ¾ 8.40 254 x 22 10 x 7/8 10.45 254 x 25 10 x 1 11.50 302 x 25 12 x 1 12.50
S44 MM Inches Price CROSS CUT CHISEL 102 x 6 x 3 4 x ¼ x 1/8 6.40 152 x 13 x 6 6 x ½ x ¼ 6.95 For detailed cutting of hot 176 x 16 x 8 7 x 5/8 x 5/16 8.15 metal 203 x 6 x 9 8 x ¾ x 3/8 10.60 229 x 22 x 11 9 x 7/8 x 7/16 13.20 254 x 25 x 12 10 x 1 x ½ 16.10
12 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S45 MM Inches Price DIAMOND CUT CHISEL 102 x 6 x 3 4 x ¼ x 1/8 6.40 152 x 13 x 6 6 x ½ x ¼ 6.95 For detailed cutting of hot 176 x 16 x 8 7 x 5/8 x 5/16 8.15 metal 203 x 6 x 9 8 x ¾ x 3/8 10.60 229 x 22 x 11 9 x 7/8 x 7/16 13.20 254 x 25 x 12 10 x 1 x ½ 16.10
S46 MM Inches Price HALF ROUND CHISEL 102 x 6 x 3 4 x ¼ x 1/8 6.40 152 x 13 x 6 6 x ½ x ¼ 6.95 For detailed cutting of hot 176 x 16 x 8 7 x 5/8 x 5/16 8.15 metal 203 x 6 x 9 8 x ¾ x 3/8 10.60 229 x 22 x 11 9 x 7/8 x 7/16 13.20 254 x 25 x 12 10 x 1 x ½ 16.10
S47 Sizes Price ROUND PUNCH Rodded Available in 6, 9, 12, 48.10 Used to make round holes 16, 19, 22 & 25mm in hot metal Wooden Handle Available in 6, 9, 12, 52.70 16, 19, 22 & 25mm
S48 Sizes Price SQUARE PUNCH Rodded Available in 6, 9, 12, 42.90 Used to make square 16, 19, 22 & 25mm holes in hot metal Wooden Handle Available in 6, 9, 12, 46.60 16, 19, 22 & 25mm
S50 MM Length Price TAPER DRIFT 13 150 8.25 16 180 8.90 Used to widen punched 19 200 9.70 holes 22 230 11.50 25 250 14.20 26 250 14.70 28 250 15.40 32 250 16.90 38 250 20.90
13 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S50A MM Inches Price BARREL DRIFT 13 ½ 11.05 16 5/8 12.10 Used to widen punched 19 ¾ 13.10 holes 22 7/8 15.80 26 1 19.40 28 1.1/8 20.10 32 1.1/4 21.00 38 1.1/2 26.80
S50C MM Inches Price CARROT DRIFT 13 ½ 11.10 16 5/8 12.05 Used to widen punched 19 ¾ 13.10 holes 22 7/8 16.10 26 1 19.40 25 1 18.90 28 1.1/8 20.10 32 1.1/4 20.90 38 1.1/2 26.90
S51 KGS LBS Price STRAIGHT PEIN SLEDGE 3 7 46.15 HAMMER 4 9 63.90 For striking and fullering on 5 11 71.15 6 13 83.65 the bick of the Anvil
S52 KGS LBS Price DOUBLE FACED SLEDGE 2 4 32.05 HAMMER 3 7 33.65 4 9 36.55 For striking and general 5 11 44.95 forging hammer blows 6 13 53.95 where extra force is needed 8 18 73.10 10 22 89.50
S53 BALL PEIN HAMMER GMS OZS Price 100 4 12.10 For local flaring and general 225 8 13.10 hammer blows 340 12 13.40 450 16 14.80 700 24 17.60 900 32 20.40 1137 40 24.40 1364 48 29.85
14 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S54 GMS OZS Price CROSS PEIN HAMMER 100 4 13.96 225 8 15.28 For thinning, lengthening 340 12 17.25 and general hammer blows 450 16 18.85 700 24 21.85 900 32 27.25
S56 Description (mm) Price WATER TROUGH 450 x 300 x 300 Mild Steel 115.50 Permanent water tank for Galvanised 208.95 rapid cooling of tools and 600 x 300 x 300 workpieces Mild Steel 142.75 Galvanised 238.95
S60 MM Price LEG VICE 150 379.00
For holding metal during heavy bending and sledge hammering – The leg absorbs the shock
S71 MM Price LEG VICE AND STAND 150 575.00
For holding metal during heavy bending and sledge hammering complete with a steel stand which can be bolted to the floor – The leg absorbs the shock
S71A To Suit Price LEG VICE STAND ONLY 150mm Leg Vice 240.65
To support the Leg Vice
15 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S71P MMS Price PARALLEL VICE Jaw Width 140 195.46 Vice Height 178 Parallel Vice with two Jaw Depth 98 welded jaws for clamping Jaw Opening 200 steel – guarantees Length 475 precision parallel clamping Base Dia. 182 With Small Anvil & Anvil Size 90x95 Jaw Opening Scale
S71E De scription Price ELEVATOR Elevator 214.40
Automatic lifting device (Price does not include red vice in picture) serves to set the vice to the correct working height. * Solid steel construction, easy & secure to handle * Quick and easy to mount to workbench * Easily adjustable with the help of gas pressure spring * Swivelling 360 Deg & fastening to any position * Set height from 0-240mm * Fits with all vice makes and vice sizes * Ergonomical features
S72 MMS Price HAND LEVER SHEARS Plate 5 543.00 Sheet Metal 38 x 6 For manual cropping of cold Round 13 metal Blade Length 200
S72A MMS Price METAL SHEARS Plate 4 259.60 Sheet Metal 50 x 4 Used for cutting round, Round 11 plate and sheet metal Blade Length 150
16 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
JEWELLERS KIT For work in delicate and Description Price precious metals requiring Stake Holder fine finishes Length o/a – 7” with 3/4” Square 43.80 S73 – STAKE HOLDER Fitting Anvil Stake 34.10 S74 – ANVIL STAKE O/a Length – 5” Button Head 34.10 Working Surface – 2.1/8” Dia S75 – BUTTON HEAD Bracelet Head 34.50 Working Surface – 4.1/2 x 1.1/4” S76 – BRACLET HEAD Flat Taper Head 34.50 Working Surface – 1.3/4” Dia. S77 – FLAT TAPER HEAD Cup Head 43.80 Working Surface – 1.1/2” Dia. S78 – CUP HEAD Complete Set 211.85
S98 MM Inches Price FOLDING BAR 150 6 17.05 200 8 17.05 For general folding of given 225 9 17.05 lengths 250 10 17.05 300 12 17.05 400 16 24.80
S100 Si ze KGS LBS Price CREASING WITH HORN 1 5.45 12 203.90 2 6.82 15 215.70 For turning, wiring and beading work
Length Face Width S103 No Kgs O/a (“) Price BICK IRON 1 3.64 13.3/4 1.1/2 156.82 2 4.55 17.3/4 1.1/2 160.85 For shaping round and flat 3 5.45 15.3/4 1.3/4 197.20 surface work, straight, 4 6.82 19.3/4 1.3/4 206.05 bending and corner seam 5 9.09 27.7/8 1.3/4 266.10 closing 6 11.36 24.7/8 2 285.25 7 13.64 28.3/4 2 340.90
17 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S104 Length Pipe No Kgs Price PIPE STAKE O/a (“) Dia. (“) 1 4.55 15.3/4 1.1/2 113.40 For forming tubes and 2 6.82 17.3/4 1.3/4 132.30 pipes, and closing seams 3 9.09 21.5/8 1.3/4 200.85
S105 Length Side No Kgs Price SIDE STAKE O/a (“) Dia. (“) 1 4.55 11.3/4 1.1/2 113.95 For forming tubes and 2 6.82 13 1.3/4 129.35 pipes, and closing seams 3 9.09 17 1.3/4 172.20 4 11.36 17 2 174.95
S106 Length Shank No Kgs Price FUNNEL STAKE O/a (“) (“) 1 3.65 9 1.1/4 122.00 For forming cones and 2 6.82 10 1.1/2 146.40 trueing bases of bowls 3 9.09 185.95
Face S107 Working Depth No Kgs Surface (“) Price TINMANS ANVIL (“) 1 2.27 2 x 2.1/4 5/8 117.70 For forming and trueing 2 4.55 2.1/4 x 2.1/2 1 117.70 boxes and curved objects 3 6.82 3 x 3.1/4 1 148.30 4 9.09 3.1/2 x 4 1 215.50
S108 Blade Shank No Kgs Price HATCHET STAKE Lenth (“) (“) 1 1.82 4 1.1/4 87.00 For forming acute angle 2 3.18 6.5/8 1.1/4 99.00 bends and making 3 3.64 7.7/8 1.1/4 113.90 seamed joints 4 4.55 10 1.1/4 122.70 5 5.45 11.3/4 1.1/4 150.20
S109 Head Dia. Shank No Kgs Price HALF MOON STAKE (“) (“) 1 1.82 2 1.1/4 65.20 For forming circular bases 2 2.73 2.1/2 1.1/4 79.05 with seamed joint
18 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
Face Shank S110 No Kgs Price Dia. (“) (“) CANNISTER STAKE 1 1.82 2 1 63.55 For trueing and turning 2 2.73 2.1/2 1.1/4 82.10 edges on circular bases 3 3.64 2.3/4 1.1/4 100.85 4 4.55 3.1/4 1.1/4 106.60 5 6.82 3.1/2 1.1/2 134.80
Face Shank S110B No Kgs Price Dia. (“) (“) DOME HEAD STAKE 1 1.82 2 1 73.40 Long shank for working 2 2.73 2.3/8 1.1/4 98.65 bases of deep vessels and 3 3.64 2.7/8 1.1/4 101.95 bowl shapes 4 4.55 3.1/4 1.1/4 115.75 5 6.82 3.5/8 1.1/2 139.15
Face Shank S11C No Kgs Price Dia. (“) (“) PEPPERBOX STAKE 1 1.82 2 1 82.50 2 2.73 2.3/8 1.1/4 95.55 3 3.64 3 1.1/4 112.30 4 4.55 3.1/8 1.1/4 122.55 5 6.82 3.1/2 1.1/2 137.90
Face Shank S110D No Kgs Price Dia. (“) (“) MUSHROOM HEAD STAKE 1 1.82 1.3/4 1 78.85 2 2.73 2.3/8 1.1/4 101.95 For small curved domed 3 3.64 2.5/8 1.1/4 113.25 work 4 4.55 3.1/8 1.1/4 130.05 5 6.82 3.1/2 1.1/2 141.15
Face Shank S110E No Kgs Price Dia. (“) (“) BALL HEAD STAKE 1 1.82 2 1 84.40 For Blending contour, 2 2.73 2.3/8 1.1/4 112.45 turning bowl ends and 3 3.64 3 1.1/4 121.00 forming spout junctions 4 4.55 3.1/8 1.1/4 139.25 5 6.82 3.3/8 1.1/2 147.30
Face Shank No Kgs Price S110F Dia. (“) (“) OVAL HEAD STAKE 1 1.82 2 1 84.35
2 2.73 2.1/2 1.1/4 112.45 For shaping spoons etc. 3 3.64 2.3/4 1.1/4 121.00 4 4.55 3.1/4 1.1/4 139.25 5 6.82 3.5/8 1.1/2 163.40
19 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S111 Working Shank No Kgs Price GROOVING STAKE Surface (“) (“) 1 3.64 8.1/2 x 1.1/2 1.1/4 145.70 Has a variety of semi- 2 4.55 9 x 1.3/4 1.1/2 159.40 circular grooves useful in 3 5.45 9 x 2 1.3/4 162.45 forming beads and edges 4 6.36 9.1/4 x 2 1.3/4 189.30
S112 Working Shank No Kgs Price CREASING IRON Surface (“) (“) 1 3.64 8.1/2 x 1.1/2 1.1/4 145.60 General purpose flat face 2 4.55 9 x 1.3/4 1.1/2 145.60 plus grooves for grooving 3 5.45 9 x 2 1.3/4 164.90 and trueing on one tool 4 6.36 9.1/4 x 2 1.3/4 166.95
S113 Description Price STAKE HOLDER & KEY Stake Holder & Key 95.75
A firm base for all long shanked stakes, comes with key to dislodge stakes
S114 Description Price TINMANS HORSE Tinmans Horse 215.15
Holds Tinmans Horse Heads in either of two positions with maximum clearance
S114AM Description Price ART METAL HORSE Art Metal Horse ¾” Square Hole 49.10 1.1/4” Shank Holds Art Metal Horse Heads
20 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S114 A – H ART METAL HORSE Description Price HEADS Taper Round Flat 34.10 For working delicate items Face Dia. - 1.3/4” with a fine finish Long Taper Saddle 34.10 Face Size – 2.1/8 x 1.1/2” A - TAPER ROUND FLAT Shallow Round Button 34.10 Face Dia. – 2.1/8” B - LONG TAPER SADDLE Miniature Anvil 34.10 Length – 5.1/4” Width – 1” C - SHALLOW ROUND Round Dome 34.10 BUTTON Face Dia. – 2.1/8”
D - MINIATURE ANVIL Domes Saddler 34.10 Face Size – 2.3/8 x 1.1/2” E - ROUND DOME Miniature Tinmans Anvil 34.10 Face Size – 1.3/4 x 1.5/8” F - DOMES SADDLER Deep Round Mushroom 34.10 Face Dia. – 2.1/8” G - MINIATURE TINMANS Complete Set of 8 Heads 271.30 ANVIL
H - DEEP ROUND MUSHROOM
S115 – S120 Description Price TINMANS HORSE HEADS Oval Flat Horse Head 42.90 Face Dia. - 2” S115 – OVAL FLAT HORSE Shallow Oblong Head 42.90 HEAD Face - 3.3/4” o/a
Deep Oblong Head 42.90 S116 – SHALLOW OBLONG Face – 3.3/4 o/a HEAD Round Flat Head 42.90 S117 – DEEP OBLONG HEAD Face Dia. – 2” Shallow Round Head 42.90 S118 – ROUND FLAT HEAD Face Dia. – 2”
Deep Round Head 42.90 S119 – SHALLOW ROUND Face Dia . – 2” HEAD Saddle Horse Head 42.90 Face – 3” x 2” S120 – DEEP ROUND HEAD Square Horse Head 45.20 S122 – SADDLE HORSE Face – 1.3/4” x 1.3/4” HEAD Long Horse Head 42.90 Face – 3.3/8” x 1.3/4” S156 – SQUARE HORSE Complete Set of 9 Heads 383.50 HEAD
S157 – LONG HORSE HEAD
21 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S121 MM Inches Price MANDREL BAR 914 36 411.55 1219 48 540.80 For forming or working on 1372 54 692.10 cylindrical objects
S123 GMS OZS Price BLOCKING HAMMER 250 9 27.65 (2 ROUND FACES) 375 13 28.80 500 18 31.20 750 26 40.30 1000 35 56.20
S124 GMS OZS Price PLANISHING HAMMER 200 7 27.30 375 13 29.35 Used in shaping and 500 18 32.75 forming. One head has a flat face the other is bevelled.
S125 GMS OZS Price BLOCKING HAMMER 200 7 26.95 (ROUND & SQUARE) 300 11 28.40 375 13 29.95 500 18 30.40
S127 GMS OZS Price SMOOTHING HAMMER 250 9 29.10 375 13 36.95 500 18 40.55 750 26 49.30 1000 35 56.20
22 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S129 GMS OZS Price CREASING HAMMER 200 7 29.15 300 11 34.95 Has rounded angle faces 500 18 36.65 for forming grooves on creasing or grooving stakes.
S130 GMS OZS Price HOLLOWING HAMMER 175 6 27.70 250 9 28.55 For forming small bowl 375 13 30.40 shapes 500 18 31.80 750 26 43.25 1000 35 56.20
S131 GMS OZS Price COLLET HAMMER 284 10 34.85
Used to restore a panels shape
S132 KGS GMS Price SMITHS HAND HAMMER 15 1500 40.80
S133 GMS OZS Price RAISING HAMMER 250 9 34.85 375 13 40.00 Used in raising sheet metal
S134 MM Inches Price TINMANS MALLET 127 x 50 5 x 2 17.65 (BOXWOOD) 152 x 76 6 x 3 20.50
Particulary useful for shaping aluminium or thin sheet steel over a former
23 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S135 MM Inches Price BOSSING MALLET 50 2 21.10 63 2.1/2 22.80 Used for shaping and 76 3 28.80 stretching metal over a sandbag or wooden block
S136 Description Price COWS TONGUE STAKE Cows Tongue Stake 203.10
S142 No KGS Ball Dia. (“) Price SAUCEPAN BELLY 1 6.82 2.1/4 295.05 STAKE 2 9.09 2.1/2 339.60 3 11.36 2.3/4 400.40 4 13.64 3.1/4 427.35
S143 No KGS Working Price TEA KETTLE BOTTOM Surface (“) STAKE 1 2.73 6 x 1.1/2 66.80 2 4.55 6.3/4 x 1.3/4 91.50
S144 No KGS Working Price DRIP PAN STAKE Surface (“) (SQUARE) 1 2.76 3 x 3 55.10 2 3.64 3.1/2 x 3.1/2 62.30 3 4.55 4 x 4 101.75 4 6.82 4.3/8 x 4.3/8 142.80 5 9.09 4.3/8 x 4.3/8 P O A For one round end add 35%
S145 Length Shank No Kgs Price BLOWHORN STAKE O/a (“) (“) 1 6.82 20.7/8 1.1/2 202.00 Large horn for shaping 2 11.36 23.5/8 1.3/4 345.00 abrupt taper funnels. Smaller horn shapes taper tubes.
24 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S146 Description Price CANDLEMOULD STAKE Candlemould Stake 147.90
Has long taper and short taper horns for tube shaping or forming and general purposes.
S147 Descripti on Price SCROLLING HORN Scrolling Horn 1.3/4” Prongs 24.30 Distance Between Prongs – 5/8” For beginning the scroll.
S148 MM Inches Price SCROLLING IRONS 57 2.1/4 35.00 89 3.1/2 36.50 For forming the scroll 127 5 38.30
S149 Description Price SINGLE ENDED WRENCH Single Ended Wrench 18.50
For gripping metal as it is levered in the Scrolling Irons
S150 Description Price DOUBLE ENDED Double Ended Wrench 24.70
WRENCH
For gripping metal as it is levered in the Scrolling Irons
S151 Description Price SCROLLING PLIERS Scrolling Pliers 34.65
For holding hot metal while it is used with the scroll making tools
25 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S152 Length Side No Kgs Price DOUBLE ENDED SIDE O/a (“) Dia. (“) STAKE 1 6.82 17 1.1/2 139.00 2 9.09 17 1.3/4 163.30 Two round horns for 3 11.36 17.3/4 2 170.85 shaping, forming or 4 13.64 17 2.1/2 214.80 seaming pipe, tubes, cylinders
S154 Length Side No Kgs Price FUNNEL & SIDE STAKE O/a (“) Dia. (“) 1 6.82 19.5/8 1.1/2 210.25 Forming of small cones, 2 9.09 19.5/8 1.3/4 287.20 trueing of rings and 3 11.36 22 1.3/4 358.15 cylindrical work 4 13.64 21.5/8 2 417.20
S155 Size KGS LBS Price EXTINGUISHER STAKE 1 3.64 8 138.90
For bending and trueing
S158 Description Price NEEDLECASE STAKE Needlecase Stake 121.20
For shaping fine round and flat surface work, bending and corner seam closing
S159 GMS OZS Price RIVETTING HAMMER 200 7 18.90 300 10 19.80 A hammer with a special 400 14 21.40 head for securing rivets 500 17 22.10 600 21 25.90
800 28 30.10 1000 35 34.50
26 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S160 GMS OZS Price STRETCHING HAMMER 500 18 35.20
For raising and planishing shaped cylindrical work
S162 Description Price SNARLING IRON Snarling Iron 72.80
Used in the process of Snarling, when one end is held in a vice and the shank is struck with a hammer, the repercussion of the other end, or beak, within the article worked upon gives the requisite blow for producing raised work
S163 GMS OZS Price REPOUSSE HAMMER 114 4 38.10
Used for decorative work involving embossing
S166 LB OZS Price FARRIERS SHOE 1.3/4 28 32.50 TURNING HAMMER 2 32 32.50
Used in the making of horseshoes
S170 MM Inches Price LEATHER SANDBAG 152 6 32.55 203 8 39.75 Used for support during fine 229 9 43.10 hammer work on sheet 254 10 52.45 metal 304 12 65.05 357 14 80.75 406 16 105.00 457 18 125.95
27 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S201 GMS OZS Pr ice HATCHET PATTERN 57 2 P O A SOLDERING IRONS 114 4 23.10 227 8 29.10 Copper head for applying 341 12 32.00 solder to the joint 454 16 35.90 568 20 P O A 680 24 48.05 795 28 P O A 909 32 52.45 1136 40 P O A 1364 48 71.80
S202 GMS OZS Price STRAIGHT PATTERN 57 2 P O A SOLDERING IRONS 114 4 20.50 227 8 25.50 Copper head for applying 341 12 27.90 solder to the joint 454 16 31.25 568 20 P O A 680 24 41.65 795 28 P O A 909 32 45.80 1136 40 P O A 1364 48 62.40
S302 Cap. MMS Inches Price CAST IRON MELTING Lead POT 66Kgs 254 10 98.00
To hold Lead and other non-ferrous low temperature metals during melting
28 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S309 MMS Inches Price HAND GROOVER 3.2 1/8 19.85 4.8 3/16 19.85 For hammering given 6.4 ¼ 19.85 diameters into sheet metal 8.0 5/16 24.95 9.5 3/8 24.95
S310 MMS Inches Price HOLLOW PUNCH 3.2 1/8 7.15 4.8 3/16 7.15 For punching holes in 6.4 ¼ 7.50 leather, paper, plastic, 8.0 5/16 7.50 wood etc. 9.5 3/8 7.80 11.1 7/16 9.10 12.7 ½ 9.10 15.9 5/8 10.75 19.0 ¾ 12.35 22.0 7/8 13.95 25.4 1 20.85
S311 MMS Inches Price COMBINED SET UP & 2.4 3/32 8.75 SNAP 3.2 1/8 8.75 4.0 5/32 9.45 Used in sequence to form a 4.8 3/16 9.45 domed rivet 6.4 ¼ 12.80
S311A MMS Inches Price SINGLE RIVET SET UP 2.4 3/32 6.90 3.2 1/8 7.20 Used to set up the rivet 4.8 3/16 8.55 6.4 1/4 8.55
S311B Sizes Price CENTRE PUNCH Available in 1/16, 3/32, 5.60 1/8, 5/32, 3/16 & ¼”
For the accurate marking of centres prior to drilling
29 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S311C MMS Inches Price WAD PUNCH 6.4 ¼ 8.80 8.0 5/16 9.05 Used to cut perfectly round 9.5 3/8 8.85 holes in soft material such 11.1 7/16 9.80 as leather, plastic, rubber 12.7 ½ 9.60 and card. 15.9 5/8 11.30 19.0 ¾ 12.30 22.0 7/8 13.40 25.0 1 14.65 31.7 1.1/4 20.50 38.1 1.1/2 26.95 50.8 2 52.70 63.8 2.1/2 108.90
S313 Inch es Price CHIPPING BLOCK 6 x 6 x 1 30.45 9 x 9 x 1 42.20 12 x 9 x 1 64.60 10 x 8 x 2 128.70 12 x 12 x 2 135.10
S315 Description Price BRASS RULE Brass Rule 15.75
Folding rule 24” with metric graduations too
SAFETY EQUIPMENT Description Price Safety Goggles 4.90 F228-HD4 – SAFETY Ear Defenders 13.20 GOGGLES Leather Apron 14.20 18” Leather Gloves 19.75 F228-ED1 – EAR DEFENDERS
F222 – LEATHER APRON
F224-457 - LEATHER GLOVES
30 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
BLACKSMITHS APRONS Continental This heavy duty apron is worn by professional blacksmiths in many countries. It features the ‘continental backstrap’ that takes the weight of the apron off the neck down to the waistband. It is made in best quality oiled grain leather and is available with straight or ‘scoop’ neck on the bib (scoopneck is pictured).
Style Unit Price Continental Grain Leather – 22” Long 24” Across 119.45 Continental Scoop Neck in Grain Leather 126.95
Blacksmiths Style ‘A’ This split apron is available in heavy suede or oiled grain. This enables the blacksmith to stand over a large bar while working on it without being restricted by the apron. A neck strap normally holds the bib but the continental back strap is also available at extra cost. The waist is normally secured with ties but a belt and buckle is also available at an extra cost. Style ‘A’ is also available as a welders apron.
Style Unit Price ‘A’ Heavy Suede 32” Long 104.50 ‘A’ Welders Apron 36” Long 104.50
Blacksmiths Style ‘B’ The style ‘B’ is a light duty apron made in regular suede. The apron is cut in one piece secured at the waist with a tie. The bib is supported with a neck strap. It is available in two lengths.
Style Unit Price ‘B’ Blacksmiths Apron 22” Long 64.00 ‘B’ Blacksmiths Apron 32” Long 93.90 ‘B’ Blacksmiths Apron with Pockets 103.00
Blacksmiths Style ‘C’ The Style ‘C’ is a very simple apron designed for bench work. It is made in regular suede and supported by a 1” suede belt and roller buckle, or ties.
Style Unit Price ‘C Blacksmiths Apron 14” Long 45.20
31 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
WIRE BRUSHES Description Price Jumbo Block Brush 24.55 JUMBO BLOCK BRUSH Wire Brush 14.50 Butchers Block Brush 16.25
WIRE BRUSH
BUTCHERS BLOCK BRUSH
GN2052 Description Price TWIN BURNER GN2052 427.45 SOLDERING STOVE Available in Natural Gas or LPG
Allows Soldering Irons to be kept at working temperature without being burnt
2052B Description Price REFACTORY LINING FOR Top & Bottom Brick 240.00
GN2052 SOLDERING STOVE
Replacement bricks for GN2052 Twin Burner Soldering Stove
32 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
SFH 213 PORTABLE HAND CRANKED FORGE
18” (457MM) Dia. Forge Firepan
Including: DT53 Tue Iron DT80 Distance Piece V40 Hand Cranked Fan
UNIT PRICE £ 935.55
33 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
SFH 219 PORTABLE HAND CRANKED FORGE
24” (609MM) Dia. Forge Firepan
Including: DT53 Tue Iron DT80 Distance Piece V40 Hand Cranked Fan
UNIT PRICE £ 935.55
34 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
SFP 219 PORTABLE FORGE
24” (609MM) Dia. Forge Firepan 1 Phase – 230V
Including: DT53 Tue Iron DT80 Distance Piece Fan Assembly Slide Valve
UNIT PRICE £ 805.95
35 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
SFH 237 PORTABLE HAND CRANKED FORGE
30” x 24” (762 x 609MM) Forge Firepan
Including: DT68 Tue Iron DT81 Distance Piece V40 Hand Cranked Fan
UNIT PRICE £ 969.25 36 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
SFP 238 PORTABLE FORGE
30” x 24” (762 x 609MM) Forge Firepan 1 Phase – 230V
Including: DT68 Tue Iron DT81 Distance Piece Fan Assembly Slide Valve
UNIT PRICE £ 830.65
37 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
SFPBB – BOTTOM BLAST FORGE
Including: 12” Round Firepot Fan Assembly Slide Valve
UNIT PRICE £ 1,045.25
38 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
PORTABLE FORGE SPARES
AL-V40 Description Price V40 HAND CRANKED V40 Hand Cranked Fan 565.25
FAN
DRY TUE IRONS Description Price DT53 Tue Iron 122.25 AL-DT53 DT68 Tue Iron 118.55 DT53 TUE IRON
Curved
AL-DT68 DT68 TUE IRON
Flat
DISTANCE PIECE Description Price DT80 Distance Piece 100.75 AL-DT80DP DT81 Distance Piece 64.65 DT80 DISTANCE PIECE
AL-DT81DP DT81 DISTANCE PIECE
39 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
SFP1 SOLID FUEL FORGE 1 Metre Square Firepan Single Phase or Three Phase Including: Including: T12 Tue Iron & Water Bosh T12 Tue Iron & Water Bosh HB2 Breast Plate HB2 Breast Plate 230V Single Phase Fan Assembly 420V Three Phase Fan Assembly Slide Valve Slide Valve Fan Mounting Plate Fan Mounting Plate
SINGLE PHASE THREE PHASE
£ 1,648.00 £ 1,700.00
Stainless Steel / Galvanised Hoods & Chimneys P O A 40 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
SFP2 SOLID FUEL FORGE 2 Metre x 1 Metre Firepan
Single Phase or Three Phase Including: Including: 2 x T12 Tue Iron & Water Bosh 2 x T12 Tue Iron & Water Bosh 2 x HB2 Breast Plate 2 x HB2 Breast Plate 2 x 230V Single Phase Fan Assembly 2 x 420V Three Phase Fan Assembly 2 x Slide Valve 2 x Slide Valve 2 x Fan Mounting Plate 2 x Fan Mounting Plate
SINGLE PHASE THREE PHASE
£ 2,812.00 £ 2,912.00
Stainless Steel / Galvanised Hoods & Chimneys P O A 41 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
FORGE SPARES
AL-T11 / T12 / T16 Description Price WATER COOLED TUE T11 Tue Iron 302.30 IRON & WATER BOSH T11 Water Bosh 90.25 T11 Tue Iron & Water 440.00 Bosh Assembly An opening which air is T12 Tue Iron 325.00 forced into the forge to T12 Water Bosh 90.25 facilitate combustion T12 Tue Iron & Water 440.00 Bosh Assembly (See Sizes Below) T16 Tue Iron 400.50 T16 Water Bosh 94.25 T16 Tue Iron & Water 681.05 Bosh Assembly
Description Price AL-SEAL Assembly Kit 11.40 TUE IRON & WATER Awaiting Photo BOSH ASSEMBLY
Sealant and Bolts to join the Tue Iron & Water Bosh
Dimensions of Standard Tue Irons (“) Tue Iron A B C D E F T11 5.1/2 4.3/4 13 4 8.5/16 1 T12 6.5/8 6.3/8 13.3/4 4.5/16 10.1/2 1.1/8 T16 7.1/4 10 20 4.1/2 10.1/2 1.1/2
Dimensions of Standard Water Boshes (“) Water Bosh Length Width Height T11 16.3/4 4.7/8 17.1/2 T12 21 6.1/2 20.3/4 T16 25.1/4 10.5/16 24.1/4
42 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
FORGE SPARES
AL-MOTORND Description Price MOTORISED FAN SET Motorised Fan Set 409.60
220 / 240V – 1 Phase 50Hz – 4000rpm – 1/4HP
AL-MOTOR Description Price MOTOR ONLY Single Phase 211.95 220 / 240V – 1 Phase 3 Phase 265.00 50Hz – 4000rpm – 1/4HP
AL-CB/RECT Description Price RECTANGULAR CARBON Rectangular Carbon 20.95 BRUSHES Brushes
Replacement brushes for old style fan set 10mm x 5mm
AL-CB/RECN Description Price CARBON BRUSHES Carbon Brushes 15.40
Replacement brushes for fan set
AL-IMP Description Price IMPELLOR FAN Impellor Fan 33.75
The rotating blade of a motor
AL-SVALVE Description Price SLIDE VALVE Slide Valve 65.35
A valve that slides back and forth over ports to control the airflow
43 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
FORGE SPARES
BREAST PLATE Description Price HB2 Breast Plate 198.95 7.3/4” Hole Cast plate to protect the chest of the forge
AL-HB2 HB2 BREAST PLATE
XMISC-1371 Description Price 25KGS 18 X 10MM 20Kgs Coke Beans 15.70
MONCKTON COKE BEANS
Used as a fuel for the coke forge
CENT-12FIR Description Price 12” FIREPOT FOR 12” Firepot 424.00 BOTTOM BLAST FORGE Outside Dia. – 12” Inside Dia. – 9” A vessel which holds the Depth – 3” fuel or fire in a furnace Height – 10” Flange – 4.3/4”
44 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
FARRIERS PORTABLE LPG FORGE
FEATURES
1. Quick to reach working temperature 2. Highly efficient consumption of LPG 3. Strong metal casing (2.5mm steel) to withstand everyday wear and tear 4. On / off tap conveniently located next to the gas burner 5. Fire bricks at hearth and rear for maximum durability 6. Ceramic fibre panels for maximum insulation & minimum weight at other exterior faces 7. Portable – Light and easy to move around with a facility for permanent fixing 8. Replacement lining panels readily available
WIDE RANGE OF USES
The ‘Sterling’ Portable Forge is highly versatile and is a useful tool for many specialists who work with metal. Here are some examples:
Tool rooms for small batches or one off jobs Maintenance engineers and fitters working on and off site Farriers and blacksmiths Repair work in the home or on the farm Craft shops, goldsmiths and silversmiths
TECHNICAL SPECIFICATION
Models: AL-FF1 (without rear flap door) & AL-FF2 (with rear flap door) Gas Pressure: Maximum – 25 psi. Working: 10 – 15 psi. Temperature Range: 1200 – 1400 centigrade Weight: 24.4 Kgs (54Lbs) Power Source: This forge is designed to work on Liquid Propane Gas (LPG) only Dimensions:
He ight Width Depth Interior 6” 8.1/4” 6” Exterior 10.1/4” 12.5/8” 12.1/2” Overall with Burner 20.3/8” 13” 12.1/2”
45 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
FARRIERS PORTABLE LPG FORGE & SPARES
FARRIERS FORGE Description Price MK2 Portable Forge 345.30
AL-FF2 MK2 PORTABLE FORGE
BURNER FOR MK2 Description Price PORTABLE FORGE Burner 39.00 Awaiting Photo
46 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications CRUCIBLE FURNACE & SPARES
FL-CM450 Description Price CM450 SAFTEY TILT CRUCIBLE CM450 Crucible 1,342.20 FURNACE Furnace
Runs on either Natural Gas or on LPG bottled gas Melts up to 2 litres of Aluminium in 35 minutes Temperature range - 950°C to 1000°C Melt time of 40 - 60 minutes based on Grade LM4 Aluminum which we can be supplied by Vaughans Safety tilt crucible removes the need to lift the pot unless required.
FL-CM450PB Description Price CM450PB SAFETY TILT CRUCIBLE CM450PB Crucible 2,474.27 FURNACE Furnace
Melts up to 2 litres of Brass or Bronze in 35 minutes and 2 litres of Aluminium in 25 minutes Maximum temperature 1100°C Safety tilt crucible removes the need to lift the pot unless required. If required, a special lifting frame lifts the whole drum safely COSHH Regulations compliant
FL-CM700 Description Price RAPID MELTING CRUCIBLE FURNACE CM700 Rapid Melts 11 kg of Copper or Zinc in 35 minutes and 4 kg Melting Crucible 5,650.17 of Aluminium in 25 minutes Furnace Maximum temperature 1200°C Push-button operated motorised safety tilt system Designed to work with natural gas, propane, or butane COSHH Regulations compliant
FL-MBENCH Description Price MOULDING BENCH Moulding Bench 1,530.60 Rigidly constructed to be totally stable with the 200kg sand bin full to capacity Aesthetically designed to match the range of gas equipment Restricts the sand within a specific area when filling moulding flasks and so helps to keep the floor sand free and reduces the chance of accidents
47 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications CRUCIBLE FURNACE SPARES / GAS FIRED KILNS
FL-SANDTRA Description Price RAISED SAND TRAY Raised Sand Tray 275.55
Suitable for CM450 & CM450PB (Pictured with CM450PB)
FL-ATP10 Description Price ATP10 CRUCIBLE POT & LID ATP10 Crucible Pot & Lid 149.55
FL-C30 Description Price C30 CRUCIBLE POT C30 Crucible Pot 280.70
FL-TPX25B Description Price TPX25B CRUCIBLE POT TPX25B Crucible Pot 499.55
FL-LN1000 Description Price LN1000 GAS FIRED KILN LN1000 Gas Fired Kiln 1,365.78 For professional and student use Can be permanently installed or used as a portable kiln Piezo Spark Ignition - eliminates lighting problems Flame Failure Device - no flame - no gas Heat Control Valve provides simple, safe temperature control Unique Safety Door - provides minimum heat exposure. Heats up to 850°C in 10 minutes, 1000°C in 35 minutes Casing Heat Guard available as optional extra
FL-LN2000 Description Price LN2000 GAS FIRED KILN LN2000 Gas Fired Kiln 2,183.10
For professional and student use Designed for use in well ventilated areas Piezo Spark Ignition - eliminates lighting problems Flame Failure Device - no flame - no gas Heat Control Valve provides simple, safe temperature control Unique Safety Door - provides min heat exposure. Heats up to 850°C in 10 minutes, 1100°C in 30 minutes Casing Heat Guard available as optional extra
48 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
BRAZING HEARTHS
FL-DS400 Description Price DS400 BRAZING HEARTH DS400 Brazing Hearth 3,248.10 Perfect for use in school design technology workshops or industry use, i.e. jewellery workshops. Easy-to-use RF80 brazing torch allows one-hand operation A solid refractory hearth with robust side and rear heat shields A fully fail safe system, compliant with British Standards All sequences are visually displayed using neon indicators Optional extras are available
FL-DS400D Description Price DS400D DOUBLE DS400D Double Brazing 4,417.70 BRAZING HEARTH Hearth
Identical to the DS400 single brazing hearth with the addition of dual working positions 2 easy-to-use RF80 brazing torches allows one-hand operation A solid refractory hearth with robust side, central and rear heat shields A fully failsafe system, compliant with British Standards All sequences are visually displayed using neon indicators Optional extras are available
FL-DS430S Description Price DS430S COMBINED CHIP DS430S Combined Chip 4,812.20 FORGE & BRAZING Forge & Brazing Hearth HEARTH DS430S Canopy 746.75 Especially useful where space limitations are a consideration Unit consists of a ceramic chip forge and a single brazing hearth usually equipped with a RF80 brazing torch Can be run on either Natural Gas or LPG bottled gas Shown with Varivac extraction canopy Optional extras available
49 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
FL-DS430D Description Price COMBINED CHIP FORGE DS430D Combined Chip & DOUBLE BRAZING Forge & Double Brazing 5148.97 HEARTH Hearth Especially useful where space DS430D Canopy 836.36 limitations are a consideration Unit consists of a ceramic chip forge and two brazing hearth usually equipped with 2 RF80 brazing torches Can be run on either Natural Gas or LPG bottled gas Shown with Varivac extraction canopy Optional extras available
FL-DS430A Description Price CERAMIC CHIP FORGE DS430A Ceramic Chip 4,358.80 Push-button no-volt release starter Forge 12.5kg of ceramic chippings DS430A Canopy 595.85 Side and rear heat shields Automatic safety check of controls and air fan Can be run on either Natural Gas or LPG bottled gas Rake iron
FL-CHIPS Description Price Awaiting Photo 12.5KGS CERAMIC CHIPS 12.5Kgs Ceramic Chips 147.05
50 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications TORCHES
TRCH-3070 Description Price GAS AIR TORCH 3070 Gas Air Torch c/w 413.95 hose & 2vm General purpose torch to 3070 Nozzle 1vm 114.33 give a wide range flame 3070 Nozzle 2vm 114.33 length & spread and upto 3070 Nozzle 3vm 114.33 130,000 BTU per hour output
TRCH-RF80 / RF10 Description Price RF80 Torch 355.35 RF80 TORCH / RF10 RF10 Torch 355.35 TORCH A range of single hand operated soldering and brazing torches for fine jewellery and heavy brazing For use with natural or bottled gas Constructed from nickel plated brass with a heat resistant steel burner head to ensure long and reliable service RF80 Gas Torch is designed for heavy brazing. The RF10 Gas Torch is smaller with a heat output ideal for fine jewellery Optional extras available
TRCH-T4 / T2 Description Price T4 TORCH / T2 TORCH T4 Torch 355.35 T4 Torch is designed for heavy T2 Torch 355.35 brazing. The T2 Torch is smaller with a heat output for more delicate work Provides a wide range of flames at the turn of a valve Ideal for brazing, soldering, metal melting, heat treatment, glass, lead and tinning work Constructed from nickel plated brass with a heat resistant steel burner head to ensure long and reliable service Optional extras available
51 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
TRCH-NFT Description Price ADAPTO NEEDLEFLAME Adapto Needleflame 159.65 TORCH Torch
Produces a fine, precise flame for silver soldering Ideal for jewellers, model makers, dental and instrument technicians Insulated torch with adjustable air/gas valves Twinned gas/air tubing (1.5 metres) Diaphragm air pump and spare diaphragm Tubing adaptor Cast iron base with 30°and 60° vertical adjustment
TRCH-NFT Description Price ADAPTO PENCIL TORCH Adapto Pencil Torch 97.85 PLEASE NOTE: Can only be used with Natural Gas A precision instrument with multiple usage Ideal for dental work, model making and all soft soldering projects Provides a long thin flame ideal for when high heat is not required Flame length of up to 80mm Solid, stable base gives static positions of 30°, 60° or 90° Insulated stainless steel barrel which remains cool during intense use making it ideal for hand held use
LOW TEMPERATURE CASTING UNITS
FL-LT1 Description Price LOW TEMPERATURE Low Temperature 822.97 CASTING UNIT Casting Unit
Low Temperature casting unit Mould Holder and clip 5 sticks Lead Free Pewter Selector Switch for High/Low Temperature Control 1 MDF mould Spill tray Lead Free Pewter, MCF Low Melting Point Alloy and vulcanised rubber moulds are available as optional extras.
52 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
JEWELLERY EQUIPMENT
FL-EM222 Description Price JEWELLERY BENCHES EM222 Jewellery Bench 5,621.65
Gas/air manifolds rear and front and 9MS8 Blower Fan - single phase Flexible approved gas hose for connection with non-return valve fitted to gas inlet with double solenoid 2 Adapto RF10 jewellery torches with colour coded reinforced gas and air hoses Adapto needle flame torches with colour coded gas and air hoses and three position stand (2 for EM 222 only) Range of optional extras available
FL-PICK Description Price PICKLING BENCH Pickling Bench 3,054.40 Pickling bath with large earthenware sink Lid doubles as anti-splash protection Polycarbonate window for viewing work in progress Acid proof heat stabilised polypropylene worktop Self draining worktop and backstand Front and side raised edges Weir type drain tube and plug lock allow safe acid evacuation Ample undersink storage with lockable double doors
WELDING BENCH
FL-SA4000 Description Price MODULAR WELDING Modular Welding Bench 1,291.95
BENCH Designed to meet all manual welding requirements in the workshop Rugged construction for industrial and educational use Maintenance free
53 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
KIT–S000 - TINMANS TOOL KIT
QTY PRODUCT CODE DESCRIPTION 1 S135 2” Bossing Mallet 1 S53 8oz Ball Pein Hammer 1 S98 10” Folding Bar 1 S100 Creasing with Horn (5.45Kgs) 1 S108 Hatchet Stake (1.82Kgs) 1 S109 Half Moon Stake (1.82Kgs) 1 S110 Cannister Stake (1.82Kgs) 1 S110/2 Dome Head Stake (1.82Kgs) 1 S110/5 Ball Head Stake (1.82 Kgs) 1 S114I Tinmans Horse 1 S115 Oval Flat Horse Head 1 S116 Shallow Flat Horse Head 1 S117 Deep Oblong Horse Head 1 S118 Round Flat Horse Head 1 S119 Shallow Round Horse Head 1 S120 Deep Round Horse Head 1 S122 Saddle Horse Head 1 S124 13oz Planishing Hammer 1 S125 13oz Round & Square Blocking Hammer 1 S130 18oz Hollowing Hammer 1 S154 Funnel & Side Stake (6.82 Kgs) 1 S156 Square Horse Head 1 S157 Long Horse Head 1 S170 8” Leather Sandbag 2 S309 Hand Groover (Assorted Sizes) 2 S311 Combined Set Up & Snap (Assorted Sizes) 1 S311B 1/8” Centre Punch
INDIVIDUAL SELLING PRICE OF ITEMS - £ 1,649.35
KIT PRICE - £ 1,063.76
NETT WEIGHT: 53 KGS (117LBS) / GROSS WEIGHT: 67KGS (147LBS) SIZE: 88 x 42 x 24 CMS
54 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
KIT-S001 - BLACKSMITHS SET NO. 1
QTY PRODUCT CODE DESCRIPTION 1 S014 Poker 1 S013 Rake 1 S015 Shovel 5 Pairs Assorted Standard Tongs 3 S33 Top Swage – Rodded (Assorted Sizes) 3 S32 Bottom Swage (Assorted Sizes) 3 S38 Top Fuller (Assorted Sizes) 3 S34 Bottom Fuller (Assorted Sizes) 1 S35 1.1/2” Square Flat Set Hammer – Rodded 1 S36 2.1/2” Square Flat Flatter – Rodded 2 S37 Regular Hardies 2 S39 3Lb Hot Set – Rodded 2 S40 3Lb Cold Set – Rodded 1 S43 Flat Cut Chisel 1 S44 Cross Cut Chisel 1 S46 Half Round Chisel 3 S47 Round Punches – Rodded (Assorted Sizes) 3 S48 Square Punches – Rodded (Assorted Sizes 3 S50 Taper Drifts (Assorted Sizes) 1 S52 7Lb Sledge Hammer 1 S52 10Lb Sledge Hammer 1 S53 24oz Ball Pein Hammer 1 S53 32oz Ball Pein Hammer 1 S132 Smiths Hand Hammer 1 F222 Leather Apron 1 S316 18 x 12” Blacksmiths Square 1 F224 10” Leather Gloves 1 F228 Safety Glasses
INDIVIDUAL SELLING PRICE OF ITEMS - £ 1,625.67
KIT PRICE - £ 1,288.00
NETT WEIGHT: 89 KGS (196LBS) / GROSS WEIGHT: 103KGS (227LBS) SIZE: 102 x 30 x 30 CMS
55 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
KIT-S002 - BLACKSMITHS SET NO. 2
QTY PRODUCT CODE DESCRIPTION 1 S014 Poker 1 S015 Shovel 4 Pairs Assorted Standard Tongs 4 S33 Top Swage – Rodded (Assorted Sizes) 4 S32 Bottom Swage (Assorted Sizes) 2 S38 Top Fuller (Assorted Sizes) 2 S34 Bottom Fuller (Assorted Sizes) 1 S35 1.1/2” Square Flat Set Hammer – Rodded 1 S36 2.1/2” Square Flat Flatter – Rodded 2 S37 Regular Hardies 1 S39 3Lb Hot Set – Rodded 1 S40 3Lb Cold Set – Rodded 1 S43 Flat Cut Chisel 1 S46 Half Round Chisel 2 S47 Round Punches – Rodded (Assorted Sizes) 2 S48 Square Punches – Rodded (Assorted Sizes 1 S52 7Lb Sledge Hammer 1 S52 10Lb Sledge Hammer 1 S53 24oz Ball Pein Hammer 1 S53 32oz Ball Pein Hammer 1 S132 Smiths Hand Hammer
INDIVIDUAL SELLING PRICE OF ITEMS - £ 1,260.97
KIT PRICE - £ 984.00
NETT WEIGHT: 45 KGS (100LBS) / GROSS WEIGHT: 59KGS (130LBS) SIZE: 102 x 30 x 30 CMS
56 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
KIT-S003 - BLACKSMITHS SET NO. 3
QTY PRODUCT CODE DESCRIPTION 3 Pairs Assorted Standard Tongs 3 S33 Top Swage – Rodded (Assorted Sizes) 3 S32 Bottom Swage (Assorted Sizes) 1 S38 Top Fuller (Assorted Sizes) 1 S34 Bottom Fuller (Assorted Sizes) 1 S35 1.1/2” Square Flat Set Hammer – Rodded 1 S36 2.1/2” Square Flat Flatter – Rodded 1 S37 Regular Hardies 1 S39 3Lb Hot Set – Rodded 1 S40 3Lb Cold Set – Rodded 1 S47 Round Punches – Rodded (Assorted Sizes) 1 S52 7Lb Sledge Hammer 1 S52 10Lb Sledge Hammer 1 S53 32oz Ball Pein Hammer
INDIVIDUAL SELLING PRICE OF ITEMS - £ 820.71
KIT PRICE - £ 648.00
NETT WEIGHT: 32 KGS (70LBS) / GROSS WEIGHT: 46KGS (101LBS) SIZE: 102 x 30 x 30 CMS
57 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
KIT–S307 - ESSENTIAL TOOLS & EQUIPMENT FOR BASIC BLACKSMITHS WORKSHOP
QTY PRODUCT CODE DESCRIPTION
Blacksmiths Forge Model SFP1 Hearth 1 Mtr Sq x 267mm Deep Single Phase Motor with Speed Controller Provides a 1 FRG-SFP1S Forced Draught Via Water Cooled Tue Iron. Complete with Smoke Hood Having 254mm Dia. Spigot for Chimney
101.6 Kg Single Bick Anvil 1 S1 With Machined & Heat Treated Working Face
1 S1B Cast Iron Anvil Stand 1 S10 508 x 508 x 178mm Cast Iron Swage Block 1 S11 Cast Iron Swage Block Stand
Cast Iron Mandrel Cone 1 S12 76mm Dia. Tapering to 228mm Dia. 600mm High
Blacksmiths Steel Forged Leg Vice 1 S71 150mm Wide Jaws & 1500mm Opening on Fabricated Steel Stand
Hand Lever Shears – Model 5RN Blade Length 203mm 1 S72 Cuts 5mm Sheet 6mm Bar 13mm Round
Blacksmiths Tool Kit No. 1 1 KIT-S001 See Separate Sheet
Galvanised Water Trough 1 S56 457 x 305 x 305mm
INDIVIDUAL SELLING PRICE OF ITEMS - £ 7,721.81
KIT PRICE - £ 6,759.00
NETT WEIGHT: 876KGS / GROSS WEIGHT: 986KGS VOLUME: 2.0M3
58 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
KIT-BSMITH – BLACKSMITHS STARTER KIT
QTY PRODUCT CODE DESCRIPTION 1 S053/S054 2LB Hammer (Ball Pein or Cross Pein) 1 S027-45016 18” x 5/8” Rivet Tongs 1 S018A-450 18” x 3/8” Diamond Square Hollowbit Tongs 1 S018A-4501 18” x 5/8” Diamond Square Hollowbit Tongs 1 S020-4509 18” x 3/8” Bolt Tongs 1 S020-45016 18” x 5/8” Bolt Tongs 1 S039-136W 3LB Hot Set – Wooden Handle 1 S037R Regular Hardie 1 S047A-009 3/8” Round Punch – Rodded 1 S047A-016 5//8” Round Punch – Rodded 1 F222 Leather Apron 1 XMISC-1402 Block Brush 1 S315 Brass Rule 1 F228-HD5 Safety Glasses
INDIVIDUAL SELLING PRICE OF ITEMS - £ 432.83
KIT PRICE - £ 324.63
59 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
PNEUMATIC FORGING HAMMERS
Technical Data 1. Operating System: self contained pneumatic (a separate air supply is not required). 2. Electrical supply: 380 volts (+/- 10%), three phase, 50 Hz 3. Construction: Tup: Milled and chrome plated piston with interchangeable head. Anvil: Cast iron Frame: Steel fabrication 4. Standard Accessories: emergency stop button, piston shield, foot treadle cover and motor protective switch. 5. Dies: 1 pair of flat dies
MODEL SM34 SM40 SM50 SM60 Nominal Blow – Kilos 34 40 50 60 Blows per Minute 220 220 220 220 Stroke – mm 200 200 230 230 Elect ric Motor – rpm 1400 1400 1400 1400 Electric Motor – Horsepower 5.5 5.5 7.5 7.5 External Dimensions – L x W x H - mm 1300 x 710 1270 x 780 1600 x 900 1600 x 900 x 1200 x 1300 x 1595 x 1595 Net Weight – Kilos 540 640 1150 1400
60 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
2011 Price List - Pneumatic Forging Hammers and Dies
Hammer model Number Price each SM34 5,698.25 SM40 6,112.25 SM50 6,710.25 SM60 7,439.25
1. Price includes 1 pair of budget quality flat dies, emergency stop button, plastic piston cover, treadle guard and motor protection switch. 2. All models are for 380V 3 phase electrical supply. 3. Prices are subject to Euro/£ exchange rate fluctuations.
Die pattern For SM34 or SM40 For SM50 or SM60 number Price per die Price per die As per drawings 104 221.00 292.25 101 215.00 286.20 130 220.00 292.20 105 306.00 374.35 123 305.00 411.75 124 305.00 398.50 121 221.00 292.20 106 308.00 411.75 115 220.00 292.20
After-sales
A technical team at Lye is available to support you from delivery to commissioning of your pneumatic hammer. Drawings for the recommended permanent foundation are included. Various foundation alternatives can also be suggested.
Handling
The recommended method of offloading and handling is by overhead sling. Vaughans (Hope Works) does not accept liability for any damage arising due to use of any alternative handling methods.
61 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
Optional Power Hammer Dies
62 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
FOUNDRY TOOLS & EQUIPMENT
F1 Nom. Size Qty Price SEAMLESS LADLES
Spun steel bucket shaped 16Kg 5 92.70 ladle with two pouring 10 60.90 spouts 20 43.80 25Kg 5 116.40 10 77.60 20 56.20 38Kg 5 118.40 10 80.20 20 60.90 50Kg 5 133.20 10 90.60 20 69.30 75Kg 5 138.70 10 97.95 20 78.20 100Kg 5 141.80 10 103.30 20 86.10 125Kg 5 151.20 10 109.60 20 89.20
Nom. Size Base (“) Top Dia. (“) Depth 16Kg 5.3/4 7.1/2 6 20Kg 5.3/4 7.3/4 7 25Kg 7.1/2 8.1/4 8.1/2 38Kg 7.1/2 9.3/8 8 50Kg 10 10 10.1/2 75Kg 10 12.3/4 9.1/2 100Kg 10 13.1/2 11.1/2 125Kg 10 14.1/4 13.1/2
63 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F2 Description Price LADLE CARRIER F2 Ladle Carrier up to 76.00 38Kgs
For carrying and pouring from small ladles / crucibles by one person
F3 KGS LBS Price LADLE CARRIER 25 55 90.90 50 112 137.70 For carrying and pouring 75 168 220.40 from small ladles / 100 224 286.00 crucibles by two people 150 336 450.80 Add 10% for Double Handle At Each End
F4 Dia. Handle Price WELDED LADLE MM Inches MM Inches 102 4 610 24 6.50 Hemisphere steel ladle for 152 6 760 30 7.70 scooping and pouring 203 8 914 36 10.92 molten non-ferrous metals 254 10 914 36 24.45 – Hemisphere is welded to 305 12 914 36 29.60 handle Special Handle Add 20p per Inch Double Lip Add 20p
64 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F4A MM Inches Price LADLE BOWL 102 4 3.20 152 6 4.35 Hemisphere steel ladle for 203 8 6.30 scooping and pouring 254 10 16.95 molten non-ferrous metals 305 12 23.45 Double Lip Add 20p
F5 MM Inches Price POT & COKE TONGS 915 36 124.55 1220 48 128.52 Large tongs for gripping hot castings
F6 KGS LBS Price CRUCIBLE TONGS 25 55 95.00 50 112 145.45 Manufactured especially for 75+ 168+ P O A lifting a single pattern of crucible
F6C Description Price BENT REIN CRUCIBLE Bent Rein Crucible P O A TONGS Tongs
Manufactured especially for lifting a single pattern of crucible for two people to lift
F7 Description Price HINGED LADLE CARRIER Hinged Ladle Carrier P O A
As F3 but the support ring can be opened horizontally
F8 MM Inches Price FOUNDRY CLOSE 380 15 29.75 MOUTH TONGS 450 18 31.75 550 22 35.91 For gripping flat narrow 600 24 49.15 section hot metal 914 36 60.35
65 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F8A MM Inches Price F8A FOUNDRY TONGS 380 15 32.85 450 18 33.60 Useful shape for gripping 550 22 36.10 hot castings 914 36 128.52
F9 KGS LBS Price BALE ARM FOR F3 50 112 197.40 100 224 225.20 Support cradle for manual tilt pouring of large ladles
F10A No. Top Btm Dpth Price LOOSE BOTTOM LADLE 1 8 6 8 19.99
Spun steel bucket shaped ladle with a removable base
F11 Dia. Handle Price FORGED LADLES MM Inches MM Inches 63 2.1/2 356 14 8.35 Hemisphere steel ladle for 76 3 381 15 8.40 scooping and pouring 89 3.1/2 406 16 9.05 molten non-ferrous metals 102 4 406 16 10.40 – Single piece forged 114 4.1/2 432 17 12.20 construction 127 5 508 20 14.15 152 6 610 24 17.40
F11A MM Inches Price TAG LADLES 102 4 17.90 127 5 20.15 Heavy gauge hemisphere 152 6 24.05 ladle with short handle for 203 8 29.50 sampling molten non- ferrous metals
66 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F12 Dia. Handle Price STAINLESS STEEL MM Inches MM Inches LADLES 63 2.1/2 356 14 19.00 76 3 381 15 19.35 Hemisphere ladle from light 102 4 406 16 23.75 gauge stainless steel for low 127 5 508 20 32.40 weight and durability 152 6 610 24 39.70
F13 Description Price SINGLE WHEELBARROW Single Wheelbarrow 178.70
3 CU FT. Capacity Solid Rubber Tyre
F14 Description Price Awaiting Photo TWIN WHEELBARROW Twin Wheelbarrow P O A
5 CU FT. Capacity Solid Rubber Tyre
F18 Description Price Awaiting Photo SINGLE STUDS Single Studs P O A
F19 Description Price DOUBLE STUDS Double Studs P O A
F21 Description Price STEM CHAPLETS Stem Chaplets P O A Awaiting Photo
Used in casting to support the core of a mould
F24A MM Inches Price FULLY PERFORATED 51 x 51 2 x 2 7.75 SKIMMING GATES 76 x 76 3 x 3 14.05 Price per 100 Min Order - 2000 A gating arrangement designed to prevent the passage of slag and other undesirable materials into a casting
67 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F26 Description Price MOULDERS SHOVEL No. 0 Moulders Shovel 15.30 No. 2 Moulders Shovel 15.50 For scooping, sluicing and No. 4 Moulders Shovel 15.90 tempering the sand and for No. 6 Moulders Shovel 17.20 filling the flask with No. 8 Moulders Shovel 19.70 moulders sand No. 10 Moulders Shovel 20.50
F28 Description Price COKE & STONE FORK 9 Prong 49.70
F29 MM Inches Price HAND BELLOWS 229 9 20.00
For blowing unwanted material from prepared sand moulds
F33 MM Inches Price PAINT BRUSH 12 ½ 3.50 19 ¾ 3.70 25 1 3.75 38 1.1/2 4.45 51 2 4.90 63 2.1/2 6.60 76 3 7.25 102 4 9.65
68 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F045 Description Price MOULDERS DRY BRUSH Moulders Dry Brush 6.20
F046 Description Price MILL BANNISTER BRUSH Mill Bannister Brush 4.10
F047 Description Price SUDS BRUSH Suds Brush 3.50
Awaiting Photo
F048 Description Price MOULDERS WET BRUSH Moulders Wet Brush 3.85
For damping moulding sand around the edge of the pattern to prevent crumbling
F050 Description Price SASH TOOL No. 8 Sash Tool 4.40 No. 10 Sash Tool 4.85 No. 12 Sash Tool 4.90 No. 14 Sash Tool 5.65 No. 16 Sash Tool 6.30 No. 18 Sash Tool 6.80
69 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F52 Type Inches Price CAMEL HAIR MOP 2 ¼ 7.60 4 3/8 8.30 6 ½ 9.20 8 5/8 10.50 10 ¾ 12.90
F53 MMS Inches Price CAMEL HAIR FLAT 12 ½ 5.60 25 1 6.50 38 1.1/2 7.50 51 2 8.90 102 4 15.90
F54A Description Price 12” COCO BROOM 12” Coco Broom 4.40
(SOFT)
F54B Description Price 12” BASSINE BROOM 12” Bassine Broom 4.70
(MEDIUM)
Description Price F54C 12” Pure Bass Broom 6.50 12” PURE BASS BROOM Head
HEAD (HARD)
F54D Description Price 18” COCO PLATFORM 18” Coco Platform Broom 6.80
BROOM
70 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F55 Description Price PERFORATED Perforated Chaplets P O A
CHAPLETS
Used in casting to support the core of a mould
F56H Description Price MOTOR CYLINDER Motor Cylinder Studs P O A STUDS (HEAVY) (Heavy)
F56L Description Price MOTOR CYLINDER Motor Cylinder Studs P O A Awaiting Photo STUDS (LIGHT) (Light)
71 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F60 MMS Inches Price RAMMING DOLLIES 38 1.1/2 12.00 76 3 27.50 For firming sand inside the moulding box
F61 MMS Inches Price BOXWOOD MALLET 127 x 51 5 x 2 17.65 152 x 76 6 x 3 20.50 For shaping thin sheet steel
F63 Size Wt Price RAWHIDE MALLET (SOFT 1 4oz 12.50 FACE) 2 6oz 14.70 3 8oz 16.80 For striking precision parts 4 12oz 20.95 without causing damage or 5 1.1/4LB 25.25 marking 6 1.1/2LB 29.40 7 1.3/4LB 32.10 8 2LB 39.50
F64 Size Dia. Price RAWHIDE HAMMER (Inches) (SOFT FACE) 1 1.1/4 16.40 2 1.1/2 18.80 For striking precision parts 3 1.3/4 22.90 without causing damage or 4 2 30.00 marking 5 2.3/4 47.40
F64A Size Dia. Price RAWHIDE HAMMER (Inches) REFILLS 1 1.1/4 5.55 2 1.1/2 6.35 Replacement heads for 3 1.3/4 7.20 Rawhide Hammer 4 2 8.60 5 2.3/4 14.10
72 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F72 MMS Inches Price RIDDLES (MESH) 8 5/16 22.70 18” Diameter 9 3/8 21.40 12 ½ 21.40 Fine mesh for producing facing sand and coarse mesh to clean sand
F73 Mesh Inches Price SIEVES 20 1/32 24.30 Mesh = Holes per Sqr Inch 16 1/20 22.25 18” Diameter 12 1/16 21.35 10 1/12 21.15 Fine mesh for producing 6 1/8 21.15 facing sand and coarse 4 3/16 21.90 mesh to clean sand 3.1/2 ¼ 21.90
F74 Dia. Price Gallons BUCKET (Inches) 10 3 14.20 For general use in the 12 3 15.60 Foundry
F75 Litre s Gallons Price WATERING CAN 9 2 18.45 13 3 18.90 For use in the Foundry
73 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F76 Style Price CRUCIBLES A1 19.70 A2 21.90 Ceramic pots which can be A3 24.60 heated with a naked flame A4 27.80 to melt metal within them A5 36.49 A6 39.80 A8 42.40 A10 45.20 (See page 72 for Crucible A12 49.20 Sizes) A16 54.40
A20 56.60
CX40 81.40
CX60 89.70
CX80 116.30 CX100 146.80 CX120 171.10 CX150 208.10 CX200 255.80 CX250 307.60 CX300 370.20 AX8 46.20 AX12 64.10 AX16 70.80 AX20 84.20 AX25 89.95 AX40 116.30 AX50 135.40 AX60 159.29 AX80 215.46 AX90 240.40 Other Sizes Available
F77 Inches Price Awaiting Photo WORKPAN 16 x 12 x 4.3/4 42.05
F78 Description Price DUSTBAG Linen Dustbag 1.70
To hold and sieve parting powder onto the surface of sand in the moulding box
74 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
CRUCIBLE SIZES
Capacity Pattern Approx Working Shape Brim- Height Diameter Number Capacity (Brass*) Full Water A Lb Kg Kg/L M/M M/M M/M A5/0 0.15 0.07 0.011 35 32 24 A3/0 0.29 0.13 0.028 52 46 30 A1/0 0.88 0.4 0.071 67 60 41 A1 2.6 1.2 0.19 97 79 55 A2 4.4 2 0.32 109 95 61 A3 7.7 3.5 0.47 127 105 70 A4 10.5 4.8 0.71 141 114 76 A5 13 6 0.86 152 124 86 A6 18 8 1.14 165 130 95 A8 24 11 1.7 184 156 108 A12 37 17 2.5 210 171 121 A16 47 21 3.1 232 184 133 A20 59 27 3.8 261 197 140 AX Lb Kg Kg/L M/M M/M M/M AX8 26 12 1.8 184 156 105 AX12 40 18 2.6 210 171 121 AX16 51 23 3.3 232 184 132 AX20 66 30 4.4 260 197 145 AX25 82 37 5.3 280 210 156 AX40 110 50 7.1 318 232 162 AX50 132 60 8.6 324 248 178 AX60 172 78 11.2 362 276 189 AX70 207 94 13.5 375 292 202 AX80 238 108 15.5 397 300 210 AX90 256 116 16.6 397 310 219 AX100 269 122 17.4 400 324 230 CX Lb Kg Kg/L M/M M/M M/M CX40 48 22 3.2 260 184 125 CX60 77 35 5 321 207 140 CX80 99 45 6.5 356 222 160 CX100 117 53 7.6 373 244 175 CX120 143 65 9.3 400 257 185 CX150 185 84 12 435 275 202 CX200 245 111 15.8 457 292 219 CX250 317 144 20.5 510 310 233 CX300 368 167 23.9 553 330 235 CX350 459 208 29.7 581 365 210 CX400 511 232 33.1 600 378 225 CX500 628 285 40.7 641 410 245 75 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F84 Description Price ROUND NOSE TROWEL Round Nose Trowel 29.80
For detailed finishing of sand moulds
F84B Description Price ROUND NOSE TAPER Round Nose Taper 36.50 TROWEL Trowel
For detailed finishing of sand moulds
F87 Description Price CHIPPING HAMMER Chipping Hammer 16.50
For removing unwanted exterior particles on castings and welds
F87A Description Price HEART & SPOON Heart & Spoon 36.95
For detailed finishing of sand moulds
F91 KGS LBS Price LUMP HAMMER 1.14 2.1/2 15.05 1.82 4 17.95
76 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
Awaiting Picture F96 Description Price SQUARE TROWEL Square Trowel 7.60
For detailed finishing of sand moulds
F97 Description Price TAPER TROWEL Taper Trowel 7.60
For detailed finishing of sand moulds
F98 Description Price HEART & SQUARE Heart & Square 17.30
For detailed finishing of sand moulds
F100 MMS Inches Price PATTERN CLEANER 6 ¼ 30.50 9 3/8 34.80 For removing sand from a 12 ½ 38.30 casting pattern
F110 Description Price MOULDERS LETTERS & Moulders Letters P O A FIGURES Moulders Figures P O A
To create embossed characters on the exterior of a casting
77 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F119 Description Price LEAF & OVAL SPOON Leaf & Oval Spoon 28.45 (LARGE) (Large)
For detailed finishing of sand moulds
F120A Description Price LEAF & SQUARE Leaf & Square 24.90
For detailed finishing of sand moulds
F121 Description Price LEAF & OVAL SPOON Leaf & Oval Spoon (Small) 26.05
(SMALL)
For detailed finishing of sand moulds
F121A Description Price LEAF & ROUND SPOON Leaf & Round Spoon (Small) 26.80
(SMALL)
For detailed finishing of sand moulds
F122 Description Price LEAF & LIFTER Leaf & Lifter 34.55
For detailed finishing of sand moulds
F130 Description Price LEAF & ROUND SPOON Leaf & Round Spoon (Large) 29.75
(LARGE)
For detailed finishing of sand moulds
78 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F150 MMS Inches Price Awaiting Photo DIECASTERS LEVERS 457 x 19 18 x ¾ 15.15 457 x 25 18 x 1 16.45 For prising gravity moulds
F161 Description Price PARTING POWDER 25Kgs Parting Powder 33.90
Used to cover the faces of a mould that touch during casting to prevent sticking of the faces
F165 Description Price PLUMBAGO 25Kgs Plumbago 54.20
A very fine graphite powder that prevents sand from sticking to patterns. Also can be used as a release agent for coating steel core pins when used in aluminium casting
F220 Size Price MOULDING BOX Up to 14” 12.05 CLAMPS 15 – 24” 14.30
To lock moulding boxes together to prevent disturbance of the interior during movement of the moulding box
F221 MMS Inches Price MOULDING BOX 152 x 152 x 76/76 6 x 6 x 3/3 132.25 229 x 229 x 76/76 9 x 9 x 3/3 139.40 Containers that hold the 254 x 254 x 76/76 10 x 10 x 3/3 142.75 sand when a mould is 305 x 305 x 76/76 12 x 12 x 3/3 150.75 being made. Precise 356 x 305 x 76/76 14 x 12 x 3/3 164.50 positioning of the top 305 x 305 x 101/101 12 x 12 x 4/4 168.20 (cope) and the bottom 356 x 305 x 101/101 14 x 12 x 4/4 177.15 (drag) is possible because of the positioning pegs
79 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F222 Description Price LEATHER APRON Leather Apron 14.20
24 x 36”
Chromated economy apron
F224 MMS Inches Price LEATHER GLOVES 257 10 16.70 457 18 19.75 Protection for the hand
F224Z MMS Inches Price ZETEXPLUS 1100 381 15 64.00
MITTENS
High heat resistance - withstands continuous temperature of 1500 degrees fahrenheit
F225 MMS Inches Price LEATHER LEGGINGS 304 12 19.75
(UNLINED)
Chromated Leather
F227A Description Price CANADIAN RIGGERS Canadian Riggers 2.65
Protection for the hand
80 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F228-HD4 Description Price STANDARD SAFETY Standard Safety Goggles 4.90
GOGGLES
Protection for the eyes
F228-HD5 Description Price ONE PIECE VISION Clear (HD5) 4.75
SAFETY SPECTACLES
Protection for the eyes
F228B-ED1 Description Price EAR DEFENDERS Ear Defenders 13.20
Protection for the ears
81 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F229 MMS Inches Price MOULDERS BRADS 51 2 57.55 76 3 57.55 Per 25Kgs 102 – 203 4 – 8 52.15
F230 Description Price FACE VISOR Face Visor 24.70
Conforms to EN166-1995
F234 Description Price PLASTIC SPRAY BOTTLE Plastic Spray Bottle 5.00
Used to spray coatings onto inner faces of moulds
F235 Description Price DIECASTERS PLIERS Diecasters Pliers 13.65
For removing hot castings from inside pressure dies
F236 Description Price ALUMINIUM SPRUE Aluminium Sprue Cutter 18.80
CUTTER
Used to cut channels into a mold to allow for the entry of metal
F238 Dia. Handle Price PERFORATED MM Inches MM Inches PLUNGERS 102 4 1372 54 12.60 102 4 1829 72 12.95 To contain degassing 127 5 1372 54 14.70 agents as pushed into 127 5 1829 72 15.60 molten non-ferrous metals 152 6 1372 54 15.55 152 6 1829 72 16.20
82 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F238A MMS Inches Price PLUNGER BOWLS 102 4 3.20 (COMPLETE) 127 5 3.90 152 6 4.55 To contain degassing agents as pushed into molten non-ferrous metals
F238B MMS Inches Price PLUNGER BOWLS 102 4 7.60 (PERFORATED) 127 5 8.80 152 6 10.70 To contain degassing agents as pushed into molten non-ferrous metals
F239 Dia. Handle Price SKIMMING LADLE MM Inches MM Inches 102 4 660 26 8.30 For removing waste 127 5 660 26 8.50 material from the surface of 152 6 812 32 9.40 molten metal 203 8 914 36 10.40
F240 Description Price PROTECTIVE FACE Protective Face Mask 4.25
MASK
FF001-MR Description Price MANSFIELD RED SAND 25Kgs Mansfield Red Sand 14.30
Per 25Kgs
Packing sand for moulding boxes
83 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
FF001-OB Description Price OIL BONDED SAND 25Kgs Oil Bonded Sand 36.20
Per 25Kgs
Used to form the moulding cavity and creates a fine face for a quality finish to a casting
FF003-AL Description Price DEGASSING TABLETS 500gms Degassing Tablets 13.40
Per 500gms
To remove nitrogen from molten aluminium
FF005 Description Price CERAMIC WASH Ceramic Wash 8Kgs 45.20
8Kg Tin
Essential coating to mild steel tools that come into direct contact with molten non-ferrous metals
FF017 Description Price ALUMINUM SAND Aluminium Sand Scoop 19.50
SCOOP
For scooping Moulders Sand
FF022 Description Price DAGARNITE 1Kg Dagenite 78.10 5Kg Dagenite 239.20 Specially formulated to give an acceptable depth of case hardening to small metal pieces where production time is limited
84 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
F141 – MOULDERS KIT OF HAND TOOLS
QTY PRODUCT CODE DESCRIPTION 1 F029-228 9” Hand Bellow 1 F040 Wire Brush 1 F045 Moulders Dry Brush 1 F046 Mill Bannister Brush 1 F048 Moulders Wet Brush 1 F060-076 3” Ramming Dollies 1 F061-127 5 x 2” Boxwood Mallet 1 F073-003 ¼” Sieve 1 F074-227 3 Gallon Bucket 1 F075-009 9 Litre Watering Can 1 F078L Linen Dustbag 1 F084 Round Nose Trowel 1 F084B Round Nose Taper Trowel 1 F087A Heart & Spoon 1 F096 Square Trowel 1 F097 Taper Trowel 1 F098 Heart & Square 1 F100 Set of 3 Pattern Cleaners 1 F119 Leaf & Oval Spoon (Large) 1 F120A Leaf & Square Trowel 1 F121 Leaf & Oval Spoon (Small) 1 F121A Leaf & Round Spoon (Small) 1 F122 Leaf & Lifter (Large) 1 F222 Leather Apron 1 F224-457 18” Leather Gloves 1 F225-304 12” Leather Leggings 1 F228 Safety Spectacles 1 F236 Sprue Cutter
INDIVIDUAL SELLING PRICE OF ITEMS - £ 625.21
KIT PRICE - £ 555.30
NETT WEIGHT: 25KGS / GROSS WEIGHT: 36KGS 48 X 48 X 60CMS
85 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications KIT-CM500 – MELTING & CASTING KIT QTY PRODUCT CODE DESCRIPTION 4 FF001-MR 25Kgs Moulders Red Sand 1 FF016-35CR 35cm Diameter Coarse Sand Riddle 1 FF016-35F 35cm Diameter Fine Sand Riddle 2 FF006 2Kgs Parting Powder 1 F026-002 No. 2 Moulders Shovel 2 FF017 Aluminium Sand Scoop 60 FF002-AL Aluminium Ingots 1 S021-450 18” Pick Up Tongs 1 FF003-AL 500gms Degassing Tablets 2 FF004A 100gms Alum Cov Flux 1 FF008 Degassing Plunger 1 FF009 Combined Dross Lifter & Skimming Spoon 1 F221-229 9 x 9 x 3/3” Steel Moulding Box 1 F221-305B 12 x 12 x 4/4” Steel Moulding Box 1 FF010 Strike Off Bar 1 F060-038 1.1/2” Ramming Dolly 4 FF011 Sprue Pins 2 F078L Linen Dustbag 2 F096 Square Trowel 2 F098 Heart & Square 2 F048 Moulders Wet Brush 2 FF012 Gate Cutter Square 1 FF013 Pair Draw Pins 1 FF014 Rapper 3 FF016-016 1.6mm Vent Wire 3 FF016-026 2.6mm Vent Wire 1 F234 Plastic Spray Bottle 1 F029-228 9” Hand Bellow 1 FF005 5 Litres Ceramic Wash 2 F052-002 No. 2 Camel Hair Mop 2 F224-457 18” Leather Gloves 2 F230 Face Visor 2 F222 Leather Apron 2 F225-304 12” Leather Leggings 1 FF023-001 Casting Guide PRICE EX-WORKS (PACKED) £ 1,634.95 GROSS WEIGHT: 175KGS VOLUME: 0.34M3
86 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
KIT-CM600 – MELTING & CASTING KIT QTY PRODUCT CODE DESCRIPTION 6 FF001-MR 25Kgs Moulders Red Sand 1 FF016-35CR 35cm Diameter Coarse Sand Riddle 1 FF016-35F 35cm Diameter Fine Sand Riddle 1 F026-002 No. 2 Moulders Shovel 3 FF017 Aluminium Sand Scoop 80 FF002-AL Aluminium Ingots 20 FF002-BR Brass Ingots 20 FF002-CI Cast Iron Ingots 1 S021-450 18” Pick Up Tongs 1 FF003-AL 500gms Degassing Tablets 3 FF004A 100gms Alum Cov Flux 1 FF004B 200gms Brass / Bronze Covering Flux 1 FF008 Degassing Plunger 1 FF009 Combined Dross Lifter & Skimming Spoon 1 F221-229 9 x 9 x 3/3” Steel Moulding Box 1 F221-305B 12 x 12 x 4/4” Steel Moulding Box 1 FF010 Strike Off Bar 1 FF006 2Kgs Parting Powder 3 F060-038 1.1/2” Ramming Dollies 3 F060-076 3” Ramming Dollies 6 FF011 Sprue Pins 3 F078L Linen Dustbag 3 F096 Square Trowel 3 F098 Heart & Square 3 F048 Moulders Wet Brush 3 FF012 Gate Cutter Square 3 FF013 Pair Draw Pins 3 FF014 Rapper 6 FF016-016 1.6mm Vent Wire 6 FF016-026 2.6mm Vent Wire 1 F234 Plastic Spray Bottle 1 F029-228 9” Hand Bellow 1 FF005 5 Litres Ceramic Wash 3 F052-002 No. 2 Camel Hair Mop 6 F224-457 18” Leather Gloves 6 F230 Face Visor 6 F222 Leather Apron 2 F225-304 12” Leather Leggings 1 FF023-001 Casting Guide PRICE EX-WORKS (PACKED) £ 3035.20 GROSS WEIGHT: 215KGS VOLUME: 0.80M3
87 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
FARRIERS TOOLS
BAASF Description Price AMERICAN PATTERN American Pattern Anvil 499.25 FARRIERS WIDE TABLE Working Face: 4.7/8” Wide x ANVIL 12.3/8” Long Height: 9” Length: 12” Portable & stable design Base: 7” Wide x 8” Long Wide faced table Weight: 42Kgs
Purpose designed bick Clipping Horn
BALPF Description Price LYE PATTERN FARRIERS Lye Pattern Anvil 539.85 WIDE TABLE ANVIL Working Face: 5” Wide x 14.3/4” Long Portable & stable design Height: 7.1/2” Length: 24” Wide faced table Base: 7” Wide x 10” Long Purpose designed bick Weight: 42Kgs
Tapered area in table Two hardie holes Clip pulling slots Pritcheling slot
STBH Description Price HEAVY BUFFER Heavy Buffer 17.15 5.3/4”
Awaiting Photo
This is used to remove the end of the clenched nail
STCBST Description Price STANDARD CLINCH Standard Clinch Block 15.65 BLOCK
For clinching and seating horses nails
88 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
WIRE BRUSHES Description Pric e Jumbo Block Brush 22.85 SUJBB Wire Brush 9.75 JUMBO BLOCK BRUSH Butchers Block Brush 16.25
SUWB5R WIRE BRUSH
SUWBBB BUTCHERS BLOCK BRUSH
AL-FF2 Description Price MK2 PORTABLE FORGE MK2 Portable Forge 345.30
See page 43 for sizes and technical details
FULLERS Description Price Hunter Fuller 35.05 HUNFULL Roadster Fuller 35.05 HUNTER FULLER (For larger nails)
ROAFULL ROADSTER FULLER (For smaller nails)
Used for fullering plain stamped bar stock
89 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
STSTH1.3/4 LB OZS Price STSTH2 1.3/4 28 32.50 FARRIERS SHOE 2 32 32.50 TURNING HAMMER
Used in the making of horseshoes
STHH MMS Inches Price HAMMER SHAFTS 406 16 5.90 457 18 5.90 Replacement handle for hammer
S37 Description Price HARDIES / CROPPERS 31mm Shank Hardie 27.25 Other Shanks Hardie 37.80 A cutting tool which fits into Shoe Cropper 37.80 the Anvil hole
STGRH / LH Description Price GOUGE GROOVER Gouge Groover 19.70
Awaiting Photo Available in right hand or left hand. Used for gauging the clench out
90 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
STABCCGG Description Price CLINCH CUTTER / Clinch Cutter / Gauge 23.30 GAUGE GROOVER Groover
For gauging and cutting the clench
PRITCHELS Description Price
Starting Pritchel 16.45 STSP 12” STARTING PRITCHEL Jumbo Pritchel 18.75 12.1/2”
STJP JUMBO PRITCHEL
Used in shoemaking to finish off the nail hole
STAMPS Description Price
E5 Stamp 28.20 STSWH5 16” Long E10 Stamp 28.20 16” Long E5 ROADSTER STAMP – WOODEN HANDLE (For smaller nails) Awaiting Photo
E10 HUNTER STAMP – WOODEN HANDLE (For larger nails)
For starting the nail hole
S28 MM Inches Price FARRIERS TONGS 380 15 MILD STEEL Available in sizes 22.10 6, 8, 9, 11, & 13mm For gripping given sizes of 450 18 horseshoes Available in sizes 33.60 6, 8, 9, 11, & 13mm 550 22 Available in sizes 38.70 6, 8, 9, 11 & 13mm
91 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
S28S MM Inches Price FARRIERS TONGS 380 15 STAINLESS STEEL Available in sizes 52.90 6, 8, 9, 11, & 13mm For gripping given sizes of 450 18 horseshoes Available in sizes 75.55 6, 8, 9, 11, & 13mm 550 22 112.50
STHHF MM Inches Price HOT FITTING TONGS 318 12.1/2” 25.75
Used for fitting shoes when hot
STTMSCW18 MM In ches Price CAULK & WEDGE TONGS 450 18 38.10
For shoemaking caulk and wedge style shoes
For More Tongs See Pages 6 – 9
STSJ Description Price STALL JACK Stall Jack 261.45 Height: 16” Used to shape shoes Working Face: 5” x 3.7/8” Weight: 7.5Kgs without having to use your Anvil
S32 Sizes Price BOTTOM SWAGE Available in 6, 9, 12, 42.00 16, 19, 22 & 25mm
Used with a Top Swage for reducing or drawing down round bar
For Top Swages See Page 11
92 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
STHFT Description Price HEEL FORMING TOOL Heel Forming Tool P O A
Awaiting Photo Used for heel forming
HOOF STANDS Description Price Horse Hoof Stand STHSH Height: 21” 19.45 HORSE HOOF STAND Dia. Frame: ½” Pony Hoof Stand STHSP Height: 12.1/4” 18.05 Dia. Frame: ½” PONY HOOF STAND
To rest the horses foot on while shoeing
S315 Description Price BRASS RULE Brass Rule 15.75
Folding rule 24” with metric graduations too
93 Email – [email protected] Website: www.anvils.co.uk
VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
INDEX
DESCRIPTION PAGE NUMBER Anvils 3, 4, 8 5 Anvil Stands 4 Aprons 30 -31, 77 Bale Arm 63 Barrel Drift 14 Bellows 65 Bottom Fuller 11 Bottom Swage 10, 89 Brass Rule 30, 90 Brazing Hearth 49 Breast Plate 44 Brushes 32, 65 – 67, 86 Bucket 70 Buffers 85 Camel Hair Flat 67 Camel Hair Mop 67 Carbon Brushes 43 Carrot Drift 14 Ceramic Wash 81 Chaplets 63, 68 Chipping Block 30 Chisels 12 – 13 Cross Cut Chisel 12 Diamond Cut Chisel 13 Flat Cut Chisel 12 Half Round Chisel 13 Clamps 76 Clinch Block 85 Clinch Cutter / Gauge Groover 86 Coke 44 Coke & Stone Fork 64 Cold Set 12 Combined Set Up & Snap 29 Cropper 11, 87 Crucible Furnace 47 – 48
94 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
DESCRIPTION PAGE NUMBER Crucibles 71 – 72 Dagenite 81 Degassing Tablets 81 Diecasters Levers 76 Double Ended Wrench 25 Dustbag 71 Ear Defenders 78 Elevator 16 Fan Assembly 43 Firepot 44 Fishtail Burners 44 Folding Bar 17 Forges 33 – 46, 85 Bottom Blast Forge 38 Farriers Forge 45 – 46, 86 Portable Forges 33 – 38 Solid Fuel Forges 40 – 41 Forge Spares 39, 4 2 – 44, 4 6 Fullers 86 Gauge Groovers 87, 88 Glasses 78 Gloves 77 Groover 87 – 88 Hammers 14 – 15, 22 – 23, 26 - 27, 69, 73, 87 Ball Pein Hammer 14 Blocking Hammer 22 Chipping Hammer 73 Collet Hammer 23 Creasing Hammer 23 Cross Pein Hammer 15 Hollowing Hammer 23 Lump Hammer 73 Paning Hammer 23 Planishing Hammer 22 Raising Hammer 23 Rawhide Hammer 69 Repousse Hammer 27 Rivetting Hammer 26 Sledge Hammer 14 Shoe Turning Hammer 27, 87 Smiths Hand Hammer 23 Smoothing Hammer 22 Stretching Hammer 27 Hammer Shafts 73, 87 Hand C ranked Fan 39 Hardies 11, 87 95 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
DESCRIPTION PAGE NUMBER Heart & Spoon 73 Heart & Square 74 Hinged Ladle Carrier 62 Hoof Stand 90 Hot Set 12 Impellor Fan 43 Kiln 48 Kits 51 – 56, 82 – 84 Ladle Bowl 62 Ladle Carrier 61 Ladles 61, 63 – 64, 80 Forged Ladles 63 Loose Bottom Ladles 63 Seamless Ladles 61 Skimming Ladles 80 Stainless Steel Ladles 64 Tag Ladles 63 Welded Ladles 61 Leaf & Lifter 75 Leaf & Oval Spoon 75 Leaf & Round Spoon 75 Leaf & Square 75 Leggings 77 Leg Vice 15, 16 Mallets 23 – 24, 6 8 – 69 Bossing Mallet 24 Boxwood Mallet 23 Rawhide Mallet 69 Mandrel Bar 22 Mandrel Cone 6 Melting Pot 28 Metal Shears 16 Motor 43 Moulders Brads 79 Moulding Boxes 76 Moulders Letters & Figures 74 Parallel Vice 16 Parting Powder 76 Pattern Cleaner 74 Pliers 79 Plumbago 76 Plunger Bowls 80 Plungers 79 Poker 7 Power Hammer 57 – 59
96 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
DESCRIPTION PAGE NUMBER Pritchels 88 Punches 13, 29 – 30 Centre Punch 29 Hollow Punch 29 Round Punch 13 Square Punch 13 Wad Punch 30 Rake 7 Ramming Dollies 69 Riddles 70 Safety Equipment 30 – 31, 77 – 79 Sand 80 – 81 Sandbag 27 Sand Scoop 81 Scrolling Horn 25 Scrolling Irons 25 Scrolling Pliers 25 Shears 16 Shovels 7, 65 Sieves 70 Single Ended Wrench 25 Single Rivet Set Up & Snap 29 Skimming Gates 64 Skimming Ladles 80 Slide Valve 43 Soldering Irons 28 Soldering Stove 32 Soldering Stove Spares 32 Sprue Cutters 79 Square Flat Flatter 11 Square Flat Set Hammer 11 Stakes 17 – 21, 24 – 27 Art Metal Horse 20 Art Metal Horse Heads 21 Bick Iron 17 Blowhorn Stake 24 Candlemould Stake 25 Cows Tongue Stake 24 Creasing Iron 20 Creasing with Horn 17 Double Ended Side Stake 26 Drip Pan Stake 24 Extinguisher Stake 26 Funnel & Side Stake 26 Jewellers Stakes 17
97 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
DESCRIPTION PAGE NUMBER Needlecase Stake 26 Pipe Stake 18 Saucepan Belly Stake 24 Snarling Iron 27 Tea Kettle Bottom Stake 24 Tinmans Horse 20 Tinmans Horse Heads 21 Stake Holder & Key 20 Sta ll Jack 89 Stamps 88 Star Stake Plate 4 Star Stake Plate Stand 4 Studs 64, 68 Swage Blocks 6 Swage Block Stands 6 Taper Drift 13 Tongs 7 – 10, 62 – 63, 88 – 89 Band Jaw Tongs 10 Bolt Tongs 8 Bow Tongs 10 Caulk & Wedge Tongs 89 Close Mouth Tongs 7 Crucible Tongs 66 Diamond Square Tongs 7 Double Hollowbit Tongs 8 Farriers Tongs 9 – 10, 88 – 89 Flat Mouth Tongs 9 Foundry Close Mouth Tongs 62 Foundry Tongs 63 Hollowbit Tongs 7 Hot Fitting Tongs 89 Open Mouth Tongs 7 Pick Up or Dandy Tongs 8 Pot & Coke Tongs 62 Rivet Tongs 9 Round Mouth Tongs 9 Round Side Mouth Tongs 10 Side Mouth Tongs 9 Square Mouth Tongs 8 Universal Tongs 8 Top Fuller 12 Top Swage 11 Torches 50 Trowels 73 – 74
98 Email – [email protected] Website: www.anvils.co.uk VAUGHANS (Hope Works) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications
DESCRIPTION PAGE NUMBER Round Nose Trowel 73 Round Nose Taper Trowel 73 Square Trowel 74 Taper Trowel 74 Tue Irons 39, 42 Vices 15 – 16 Visor 79 Water Boshes 42 Water Trough 15 Waterin g Can 70 Wheelbarrrows 64 Workpan 71
99 Email – [email protected] Website: www.anvils.co.uk
100 Email – [email protected] Website: www.anvils.co.uk