DOCSLIB.ORG

A Global Leader in Hypodermic Products

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
A Global Leader in Hypodermic Products ® ™ ™ ™ Interlink® System and BD™ Cannulas BD SafetyGlide™ Syringes & Needles (sterile, single use) BD Eclipse Needles and Syringes BD PosiFlush Prefilled Syringes Interlink System and BD Cannulas A Global Leader in Hypodermic Products ™ BD™ Plastic Cannula Products for use with BD Blood Collection Assembly for use BD SafetyGlide™ Hypodermic Needle BD SafetyGlide™ Insulin Syringe BD Eclipse™ Needles BD Eclipse™ Needles with Syringes BD Prefilled Flush Syringes Are Available in a Wide Variety of Sizes ® ® ® Baxter Interlink System with Baxter Interlink , Abbott LifeShield , or 50 per box, 500 per case with Permanently Attached Needle 100 per box, 1,200 per case 50 per box, 300 per case and Solutions To Meet All Your Flush-Protocol Requirements. B. Braun SafeLine® Systems 100 per box, 1000 per case 305921 27 G x 5/8 in. Needle 100 per box, 400 per case 305757 30 G x 1/2 in. 305758 27 G x 1/2 in. ™ 303369 Threaded Lock Cannula 25 per box, 200 per case 305901 25 G x 5/8 in. Needle 1 mL BD Luer-Lok Syringe 305930 1 mL Insulin Syringe with 29 G x 1/2 in. 305759 25 G x 5/8 in. ® with Detachable Needle 303380 BD Vacutainer Specimen Collection Assembly 305916 25 G x 1 in. Needle 305932 1/2 mL Insulin Syringe with 29 G x 1/2 in. 305767 25 G x 1 1/2 in. BD Ref. # Description NHRIC Number Box/Case ™ 305778 30 G x 1/2 in. with BD Blunt Plastic Cannula 305902 23 G x 1 in. Needle 305935 3/10 mL Insulin Syringe with 29 G x 1/2 in. 305761 25 G x 1 in. ™ 303370 Lever Lock Cannula 305789 27 G x 1/2 in. BD PosiFlush Normal Saline Syringes, all with 10 mL diameter 305900 22 G x 1 1/2 in. Needle 305934 1/2 mL Insulin Syringe with 30 G x 5/16 in. Thin Wall 305762 23 G x 1 in. 305780 25 G x 5/8 in. 306544 3 mL 8290-306544 30/Box 480/Case 305915 21 G x 1 in. Thin Wall 305937 3/10 mL Insulin Syringe with 31 G x 5/16 in. Thin Wall 305768 22 G x 1 in. 303365 Y Lock Cannula 306545 5 mL 8290-306545 30/Box 480/Case 305917 21 G x 1 1/2 in. Thin Wall 305763 22 G x 1 1/2 in. ™ 306546 10 mL 8290-306546 30/Box 480/Case 305918 18 G x 1 1/2 in. Needle 305765 21 G x 1 1/2 in. Thin Wall 3 mL BD Luer-Lok Syringe 305764 21 G x 1 in. Thin Wall with Detachable Needle 306547 10 mL Pump Compatible Syringe* 8290-306547 30/Box 480/Case 305766 18 G x 1 1/2 in. 305769 23 G x 1 1/4 in. 306549 3 mL with Blunt Plastic Cannula 8290-306549 30/Box 120/Case 305781 25 G x 5/8 in. 306550 5 mL with Blunt Plastic Cannula 8290-306550 30/Box 120/Case 305787 25 G x 1 in. 306551 10 mL with Blunt Plastic Cannula 8290-306551 30/Box 120/Case ™ Syringes with BD Cannula for use with BD Cannula Products for use with 305782 23 G x 1 in. BD PosiFlush™ SF Saline Syringe ® ® 305788 22 G x 1 in. Baxter Interlink , Abbott LifeShield , Baxter Interlink®, Abbott LifeShield®, BD SafetyGlide™ Needle with Syringes BD SafetyGlide™ Tuberculin Syringe 306553 10mL Sterile Field Syringe 8290-306553 30/Box 240/Case ® 305783 22 G x 1 1/2 in. or B. Braun SafeLine Systems or B. Braun SafeLine® Systems ™ ™ 50 per box, 400 per case with Permanently Attached Needle 305779 21 G x 1 in. BD PosiFlush SureScrub Saline Syringe 100 per box, 800 per case 100 per box, 1000 per case 305784 21 G x 1 1/2 in. 306559 10mL with Alcohol Pad 8290-306559 30/Box 480 Case 1 mL BD Luer Slip Syringe w/ Detachable Needle 100 per box, 400 per case 303391 3 mL Syringe with BD Twinpak™ Cannula ™ 303345 BD Blunt Plastic Cannula 305903 25 G x 5/8 in. 305945 1 mL Tuberculin Syringe with 27 G x 1/2 in. ™ BD Pre-Filled Normal Saline Syringes 303346 3 mL Syringe with BD Blunt Plastic Cannula 5 mL BD Luer-Lok Syringe 303390 BD Twinpak™ Dual Cannula Device 305927 27 G x 5/8 in. Regular Bevel 306500 10 mL Fill in 10 mL Syringe 8290-306500 30/Box 120/Case 303401 3 mL Syringe with Vial Access Cannula with Detachable Needle 303367 Interlink® Vial Access Cannula 305946 1 mL Tuberculin Syringe with 26 G x 3/8 in. 306502 5 mL Fill in 10 mL Syringe 8290-306502 30/Box 120/Case 100 per box, 400 per case Intradermal Bevel 305785 22 G x 1 1/2 in. 3 mL BD Luer-Lok™ Syringe 306503 3 mL Fill in 10 mL Syringe 8290-306503 30/Box 120/Case 303347 5 mL Syringe with BD Blunt Plastic Cannula with Detachable Needle 10 mL BD Luer-Lok™ Syringe 306504 5 mL Fill in 5 mL Syringe 8290-306504 30/Box 120/Case 303348 10 mL Syringe with BD Blunt Plastic Cannula 305904 25 G x 5/8 in. 306505 3 mL Fill in 5 mL Syringe 8290-306505 30/Box 120/Case 303392 5 mL Syringe with BD Twinpak™ Cannula with Detachable Needle 305924 25 G x 1 in. 306507 3 mL Fill in 3 mL Syringe 8290-306507 30/Box 120/Case 303393 10 mL Syringe with BD Twinpak™ Cannula 305905 23 G x 1 in. 305786 22 G x 1 1/2 in. 306508 2 mL Fill in 3 mL Syringe 8290-306508 30/Box 120/Case 303403 5 mL Syringe with Interlink® Vial Access Cannula 305906 22 G x 1 1/2 in. 303405 10 mL Syringe with Interlink® Vial Access Cannula 305909 21 G x 1 1/2 in. Thin Wall 306518 10 mL Fill in 10 mL Syringe with Blunt Plastic Cannula 8290-306518 30/Box 120/Case 306522 5 mL Fill in 5 mL Syringe with Blunt Plastic Cannula 8290-306522 30/Box 120/Case 5 mL BD Luer-Lok™ Syringe BD SafetyGlide™ Allergy Syringe Tray 306524 3 mL Fill in 3 mL Syringe with Blunt Plastic Cannula 8290-306524 30/Box 120/Case with Detachable Needle with Permanently Attached Needle BD PosiFlush™ Heparin Lock Flush Syringes, 10 USP units/mL 305907 22 G x 1 1/2 in. 25 per tray, 1000 per case 306510 5 mL Fill in 10 mL Syringe 8290-306510 30/Box 120/Case 306511 5 mL Fill in 5 mL Syringe 8290-306511 30/Box 120/Case 10 mL BD Luer-Lok™ Syringe 305950 1 mL Allergy Tray with 27 G x 1/2 in. Regular Bevel 306521 3 mL Fill in 10 mL Syringe 8290-306521 30/Box 120/Case ™ with Detachable Needle 305951 1 mL Allergy Tray with 26 G x 3/8 in. 306512 3 mL Fill in 3 mL Syringe 8290-306512 30/Box 120/Case BD Safety-Lok Syringes (sterile, single use) 305908 22 G x 1 1/2 in. Intradermal Bevel 306525 5 mL Fill in 10 mL Syringe with Blunt Plastic Cannula 8290-306525 30/Box 120/Case 306527 2 mL Fill in 3 mL Syringe 8290-306527 30/Box 120/Case ™ BD PosiFlush™ Heparin Lock Flush Syringes, 100 USP units/mL 1 mL BD Safety-Lok™ Insulin Syringe 5 mL BD Safety-Lok™ Syringe BD Integra™ Needles and Syringes 306513 5 mL Fill in 10 mL Syringe 8290-306513 30/Box 120/Case with Permanently Attached Needle with Detachable Needle BD Integra Needles and Syringes 306514 3 mL Fill in 10 mL Syringe 8290-306514 30/Box 120/Case 306515 5 mL Fill in 5 mL Syringe 8290-306515 30/Box 120/Case 100 per box, 500 per case 50 per box, 400 per case 306516 3 mL Fill in 5 mL Syringe 8290-306516 30/Box 120/Case ™ 329464 29 G x 1/2 in. U-100 BD Ultra-Fine 305561 21 G x 1 1/2 in. BD Integra™ 3 mL Syringe BD Integra™ Needles 306517 3 mL Fill in 3 mL Syringe 8290-306517 30/Box 120/Case with Detachable Needle 306528 2 mL Fill in 3 mL Syringe 8290-306528 30/Box 120/Case 100 per box, 1,000 per case ™ 306531 5 mL Fill in 10 mL Syringe with Blunt Plastic Cannula 8290-306531 30/Box 120/Case 1 mL BD Safety-Lok Tuberculin Syringe 100 per box, 400 per case 305310 25 G x 5/8 in. Retracting Needle BD PosiFlush™ Heparin Lock Flush Syringes, 10 USP units/mL with Permanently Attached Needle 305269 3 mL Syringe with 25 G x 5/8 in. Needle 305311 25 G x 1 in. Retracting Needle 306413 3 mL 8290-306413 30/Box 480/Case 100 per box, 500 per case 305270 3 mL Syringe with 25 G x 1 in. Needle 305312 23 G x 1 in. Retracting Needle Hypodermic 10 mL BD Safety-Lok™ Syringe 305271 3 mL Syringe with 23 G x 1 in. Needle 305313 22 G x 1 1/2 in. Retracting Needle 306414 5 mL 8290-306414 30/Box 480/Case 305553 27 G x 1/2 in. 305272 3 mL Syringe with 22 G x 1 1/2 in. Needle 3052751 18 G x 1 1/2 in. Blunt Fill Needle BD PosiFlush™ Heparin Lock Flush Syringes, 100 USP units/mL with Detachable Needle 1, 2 305554 25 G x 5/8 in.
Load more

Recommended publications
  • Sodium Chloride Injection USP 0.9% Prefilled Syringes, for Intravascular Use Only ------WARNINGS and PRECAUTIONS ------Initial U.S
    HIGHLIGHTS OF PRESCRIBING INFORMATION --------------------- DOSAGE FORMS AND STRENGTHS --------------------- These highlights do not include all the information needed to use • Supplied as a clear, colorless, odorless, sterile solution of Sodium Sodium Chloride Injection USP 0.9% safely and effectively. See Chloride 0.9% for intravenous administration (3) full prescribing information for Sodium Chloride Injection USP • Supplied in 50 mL and 125 mL prefilled syringes (3) 0.9%. ------------------------------- CONTRAINDICATIONS ------------------------------- • None (4) Sodium Chloride Injection USP 0.9% Prefilled Syringes, For Intravascular Use Only ----------------------- WARNINGS AND PRECAUTIONS ----------------------- Initial U.S. Approval: 2006 • Remove all air from the syringe and associated tubing prior to injection. (5.1) ----------------------------INDICATIONS AND USAGE ---------------------------- • For use in flushing compatible contrast agents through Liebel- • May cause fluid overload in patients with congestive heart failure, Flarsheim intravenous administration sets into indwelling severe renal insufficiency, and in clinical states with edema, sodium retention, or hypernatremia. (5.3) intravascular access devices (1) • Establish intravascular catheter patency prior to administration. ----------------------- DOSAGE AND ADMINISTRATION ----------------------- (5.4) • For single patient use only. (2) • Determine the volume of flush based on the imaging procedure, ------------------------------ ADVERSE REACTIONS ------------------------------
    [Show full text]
  • Aerogen Nebulizer)
    Page 1 of Date of Original: 11/15/18 Date of Review: Date of Revision: 9/4/19 Respiratory Therapy POLICY & PROCEDURE MANUAL RIBAVIRIN ADMINISTRATION (Aerogen nebulizer) PURPOSE: 1. Standardize the administration and delivery of ribavirin by aerosol 2. To protect the patient and caregivers by standardizing precautions for ribavirin delivery POLICY: The patient room must be set up according to St Jude’s Environmental Health and Safety policy prior to the administration of Ribavirin. Room preparation is to be done by the nursing staff. *See procedure section below https://home.stjude.org/ehs/Pages/ribavirin-precautions.aspx • Negative pressure room is mandatory for Ribavirin administration. • Preparation of the room is the responsibility of the nursing staff. • Ribavirin will be delivered from pharmacy in primed Aerogen syringe set appropriate for use on the MedFusion 3500 syringe pump. • The syringe pumps will be used, maintained, and stored by the respiratory therapy department. • The PPE cart is the shared responsibility of the respiratory therapist who administers the first dose of ribavirin and the nursing coordinator for that area. • Proper sign including contact precautions and STOP will be shared responsibility of the nursing and respiratory care. • All instances of spilled or leaked ribavirin must be documented in the event reporting system. • Ribavirin may be delivered to a patient during mechanical ventilation in a very specific set of circumstances. The final decision on the use of ribavirin is at the discretion of the ICU physician on service. EQUIPMENT: • Negative pressure room • DeMistifier 2000 HEPA filtration system. • DeMistifier negative pressure bed enclosure with canopy. • MedFusion 3500 Syringe pump • Flowmeter • Aerogen vibrating mesh nebulizer • Delivery Supplies (O2 tubing, O2 reducer, large bore tubing, T adaptor, and aerosol face mask) • Prescribed medication • STOP sign for the door during drug administration PPE • N95 or Positive Air Pressure mask required • Chemo resistant Gown • Double Gloves • Shoe covers PROCEDURE: 1.
    [Show full text]
  • Technical Considerations for Pen, Jet, and Related Injectors Intended for Use with Drugs and Biological Products
    Guidance for Industry and FDA Staff: Technical Considerations for Pen, Jet, and Related Injectors Intended for Use with Drugs and Biological Products Additional copies are available from: Office of Combination Products Office of Special Medical Programs Office of the Commissioner Food and Drug Administration 10903 New Hampshire Avenue, WO-32 Hub 5129 Silver Spring, MD 20993 (Tel) 301-796-8930 (Fax) 301-796-8619 http://www.fda.gov/CombinationProducts/default.htm This document finalizes the draft guidance issued in April 2009. For questions regarding this document, contact the Office of Combination Products at [email protected] or Patricia Y. Love, MD at 301-796-8933 or [email protected] U.S. Department of Health and Human Services Food and Drug Administration Center for Devices and Radiological Health, Center for Drug Evaluation Research, Center for Biologics Evaluation and Research, and Office of Combination Products in the Office of the Commissioner June 2013 Contains Nonbinding Recommendations Table of Contents INTRODUCTION.....................................................................................................................3 BACKGROUND .......................................................................................................................4 SECTION I: SCIENTIFIC AND TECHNICAL CONSIDERATIONS.............................5 A. INJECTOR DESCRIPTION .............................................................................................5 B. DESIGN FEATURES.........................................................................................................9
    [Show full text]
  • IFU for Bioglue Surgical Adhesive (Outside USA)
    Instructions for Use Syringe BioGlue® Adhésif BioGlue® Collante Chirurgico Adhesivo Quirúrgico Chirurgical Mode Chirurgischer Klebstoff BioGlue® Istruzioni d’uso BioGlue® Instrucciones d’emploi Seringue Gebrauchsanwei sung Siringa de Uso Jeringuilla Spritze BioGlue® Adesivo BioGlue® Kirurgisk BioGlue® Kirurgisk Lim BioGlue® Vävnadslim Cirúrgico Instruções de Klæbemiddel Bruksanvisning Sprøyte Bruksanvisning Spruta Utilização Seringa Brugsanvisning Sprøjte Χειρουργική συγκολλητική BioGlue® Cerrahi Chirurgické adhezivum BioGlue® ουσία BioGlue® Οδηγίες Yapışkan Kullanım BioGlue® Návod k použití Chirurgische Kleefstof χρήσης Σύριγγα Talimatları Şırınga Stříkačka Gebruiksinstructies Spuit Chirurgické Lepidlo BioGlue® Sebészi Klej Chirurgiczny Хирургический клей BioGlue® Návod na Szövetragasztó BioGlue® Sposób Użycia BioGlue® Инструкция по Použitie Striekačka Használati útmutató Strzykawka применению Шприц Fecskendő CryoLife, Inc. 1655 Roberts Boulevard, NW • Kennesaw, Georgia 30144 • USA • +1 (770) 419-3355 • Fax +1 (770) 590-3753 http://www.cryolife.com 25°C 0°C L6313.009 Rev (07/2010) ENGLISH PRODUCT DESCRIPTION BioGlue® Surgical Adhesive is composed of bovine serum albumin and glutaraldehyde. The product’s two components are mixed within the applicator tip of the syringe during application to tissue. Polymerization of the surgical adhesive begins immediately upon application, reaching bonding strength within 2 minutes. INDICATIONS • Do not peel away BioGlue from an unintended site, as 3. While firmly grasping the syringe, nose upward, BioGlue Surgical Adhesive is indicated for use as an this could result in tissue damage. turn the cap 90° counterclockwise and remove the adjunct to standard methods of surgical repair (such • An animal study12 has shown that the circumferential cap by rocking it from side-to-side. Align the tip with as sutures, staples, electrocautery, and/or patches) to application of BioGlue restricts dilatation on growing the syringe using the corresponding notches on bond, seal, and/or reinforce soft tissue.
    [Show full text]
  • Veterinary Anesthetic and Analgesic Formulary 3Rd Edition, Version G
    Veterinary Anesthetic and Analgesic Formulary 3rd Edition, Version G I. Introduction and Use of the UC‐Denver Veterinary Formulary II. Anesthetic and Analgesic Considerations III. Species Specific Veterinary Formulary 1. Mouse 2. Rat 3. Neonatal Rodent 4. Guinea Pig 5. Chinchilla 6. Gerbil 7. Rabbit 8. Dog 9. Pig 10. Sheep 11. Non‐Pharmaceutical Grade Anesthetics IV. References I. Introduction and Use of the UC‐Denver Formulary Basic Definitions: Anesthesia: central nervous system depression that provides amnesia, unconsciousness and immobility in response to a painful stimulation. Drugs that produce anesthesia may or may not provide analgesia (1, 2). Analgesia: The absence of pain in response to stimulation that would normally be painful. An analgesic drug can provide analgesia by acting at the level of the central nervous system or at the site of inflammation to diminish or block pain signals (1, 2). Sedation: A state of mental calmness, decreased response to environmental stimuli, and muscle relaxation. This state is characterized by suppression of spontaneous movement with maintenance of spinal reflexes (1). Animal anesthesia and analgesia are crucial components of an animal use protocol. This document is provided to aid in the design of an anesthetic and analgesic plan to prevent animal pain whenever possible. However, this document should not be perceived to replace consultation with the university’s veterinary staff. As required by law, the veterinary staff should be consulted to assist in the planning of procedures where anesthetics and analgesics will be used to avoid or minimize discomfort, distress and pain in animals (3, 4). Prior to administration, all use of anesthetics and analgesic are to be approved by the Institutional Animal Care and Use Committee (IACUC).
    [Show full text]
  • Nurseadviseerr201805.Pdf
    May 2018 Volume 16 Issue 5 Safety with nebulized medications requires an interdisciplinary team approach Consider implementing the following recom - ebulization of inhaled medications provides an excellent delivery route for mendations to reduce the risk of errors with the treatment of both pulmonary and nonpulmonary conditions. The mist is nebulized medications. Neasily inhaled by breathing normally, without requiring coordinated breaths to inhale the medication (as required with metered dose inhalers). This delivery Communicate orders. Establish a reli - method generally provides a rapid onset of drug action, and minimizes systemic ef - able system for communicating new and fects. An additional advantage is that the nebulizer is adaptable and can be used changed orders for nebulized medications with a mouthpiece, adult or pediatric face mask, tracheostomy collar, T piece, or to respiratory therapy staff. Test the system ventilator circuit. before use, monitor its reliability, and inves - tigate all failed communication of orders to Unfortunately, there can also be errors with nebulized medications that are linked to determine opportunities for improvement. a wide variety of common system failures and human factors. However, review of errors reported to the ISMP National Medication Errors Reporting Program (ISMP Collaborate on assessments. Consider MERP) and other sources during 2016 and 2017, revealed patterns among error types collaboration between nursing and respi - and causative factors that were relatively unique to nebulized medications and/or ratory staff to determine if a dose of neb - the conditions under which they are prescribed, dispensed, and administered. ulized medication should be held based on an assessment of the patient. Deter - Omissions due to unavailability of respiratory therapist or failed communication mine conditions that require prescriber By far, the most frequently reported errors related to the use of nebulized medications notification of a held nebulizer treatment.
    [Show full text]
  • Medfusion® 3500 Syringe Infusion Pump with Pharmguard® Medication Safety Software
    Medfusion® 3500 Syringe Infusion Pump with PharmGuard® Medication Safety Software Smart and simple with added safety The Department of Health estimates we will be facing a shortage of over 800,000 nurses by the year 2020.1 Current shortages are having serious effects on day-to-day healthcare, and many nurses feel overworked and stressed – a situation that may lead to medication errors. The Joint Commission estimates 25% of hospitalized patient deaths are related to nurse understaffing.2 The dangers of medication errors n As many as 19 patients die every day from ® MR Conditional: The Medfusion pump may be used in static 3 magnetic fields up to 150 Gauss when secured to a non-movable medication errors in the United States object. Tested using 1.5 Tesla 64MHz shielded MRI system. n More than 770,000 injuries and deaths are due to preventable drug errors, which cost 3 hospitals up to $5.6 million per year n 61% of serious and life-threatening errors 3 are associated with infusion therapy n Infusion devices account for up to 35% of all medication errors, with 67% due to 4 programming errors n 38% of medication errors occur during the administration process; 51% harmed 5 the patient 1 National Center for Workforce Analysis, U.S. Department of Health and Human Services 2 The Joint Commission, 2002 3 Materials Management in Health Care, Oct. 2005 4 Tourville, 2003 5 JAMA, 1995 The total solution Post-occlusion bolus reduction ® The Medfusion syringe pump removes the possibility of a safety system has been the leader patient receiving an automatic bolus following an occlusion in infusion pump technology for over 15 years.
    [Show full text]
  • Drug Delivery Products
    INDUSTRY MARKET RESEARCH FOR BUSINESS LEADERS, STRATEGISTS, DECISION MAKERS CLICK TO VIEW Table of Contents 2 List of Tables & Charts 3 Study Overview 4 Sample Text, Table & Chart 5 Sample Profile, Table & Forecast 6 Order Form & Corporate Use License 7 About Freedonia, Custom Research, Related Studies, 8 Drug Delivery Products US Industry Study with Forecasts for 2015 & 2020 Study #2829 | January 2012 | $4800 | 337 pages The Freedonia Group 767 Beta Drive www.freedoniagroup.com Cleveland, OH • 44143-2326 • USA Toll Free US Tel: 800.927.5900 or +1 440.684.9600 Fax: +1 440.646.0484 E-mail: [email protected] Study #2829 January 2012 Drug Delivery Products $4800 337 Pages US Industry Study with Forecasts for 2015 & 2020 Table of Contents Starch Compounds ...................................62 Infusion Pumps ..................................... 150 Cyclodextrins .......................................62 Other Infusion Products .......................... 152 Dextrates ............................................62 Enteral Feeding Supplies ..................... 152 EXECUTIVE SUMMARY Dextrin ...............................................63 IV Accessories ................................... 153 Maltodextrin ........................................63 Parenteral Drug Delivery Devices .................. 154 MARKET ENVIRONMENT Sugars & Polyols ......................................63 Prefillable Syringes ................................ 155 Sucrose ...............................................63 Injectors ..........................................
    [Show full text]
  • 2020 AAHA Anesthesia and Monitoring Guidelines for Dogs and Cats*
    VETERINARY PRACTICE GUIDELINES 2020 AAHA Anesthesia and Monitoring Guidelines for Dogs and Cats* Tamara Grubb, DVM, PhD, DACVAAy, Jennifer Sager, BS, CVT, VTS (Anesthesia/Analgesia, ECC)y, James S. Gaynor, DVM, MS, DACVAA, DAIPM, CVA, CVPP, Elizabeth Montgomery, DVM, MPH, Judith A. Parker, DVM, DABVP, Heidi Shafford, DVM, PhD, DACVAA, Caitlin Tearney, DVM, DACVAA ABSTRACT Risk for complications and even death is inherent to anesthesia. However, the use of guidelines, checklists, and training can decrease the risk of anesthesia-related adverse events. These tools should be used not only during the time the patient is unconscious but also before and after this phase. The framework for safe anesthesia delivered as a continuum of care from home to hospital and back to home is presented in these guidelines. The critical importance of client commu- nication and staff training have been highlighted. The role of perioperative analgesia, anxiolytics, and proper handling of fractious/fearful/aggressive patients as components of anesthetic safety are stressed. Anesthesia equipment selection and care is detailed. The objective of these guidelines is to make the anesthesia period as safe as possible for dogs and cats while providing a practical framework for delivering anesthesia care. To meet this goal, tables, algorithms, figures, and “tip” boxes with critical information are included in the manuscript and an in-depth online resource center is available at aaha.org/anesthesia. (J Am Anim Hosp Assoc 2020; 56:---–---. DOI 10.5326/JAAHA-MS-7055) AFFILIATIONS Other recommendations are based on practical clinical experience and From Washington State University College of Veterinary Medicine, Pullman, a consensus of expert opinion.
    [Show full text]
  • United States Patent (10) Patent No.: US 9.458,536 B2 Felts Et Al
    USOO9458536B2 (12) United States Patent (10) Patent No.: US 9.458,536 B2 Felts et al. (45) Date of Patent: Oct. 4, 2016 (54) PECVD COATING METHODS FOR CAPPED (52) U.S. Cl. SYRINGES, CARTRIDGES AND OTHER CPC ........... C23C 16/401 (2013.01); A61 B 5/1405 ARTICLES (2013.01); A61 B 5/153 (2013.01); (71) Applicants: John T. Felts, Alameda, CA (US); (Continued)Continued Thomas E. Fisk, Green Valley, AZ (58) Field of Classification Search (US); Shawn Kinney, Wayland, MA CPC ... A61M 5/178; C23C 16/045; A61L 31/08; (US); Christopher Weikart, Auburn, A61L 31/14 AL (US); Benjamin Hunt, Auburn, AL USPC . 427/2.28, 2.1, 230, 237, 569 (US); Adrian Raiche, Auburn, AL Seeee applicationa1Ca1O fileTO f CO.plet SeaClh history1SOW. (US); Brian Fitzpatrick, West Chester, (56) References Cited PA (US); Peter J. Sagona, Pottstown, PA (US); Adam Stevenson, Opelika, U.S. PATENT DOCUMENTS AL (US) 3,274,267 A 9, 1966 Chow (72) Inventors: John T. Felts, Alameda, CA (US); 3,297,465. A 1, 1967 Connel Thomas E. Fisk, Green Valley, AZ (Continued) (US); Shawn Kinney, Wayland, MA (US); Christopher Weikart, Auburn, FOREIGN PATENT DOCUMENTS AL (US); Benjamin Hunt, Auburn, AL (US); Adrian Raiche, Auburn, AL A. SSR, 1939. (US); Brian Fitzpatrick, West Chester, Continued PA (US); Peter J. Sagona, Pottstown, (Continued) PA (US); Adam Stevenson, Opelika, AL (US) OTHER PUBLICATIONS Hanlon, Adriene Lepiane, Pak, Chung K. Pawlikowski, Beverly A. (73) Assignee: s MEDICAL PRODUCTS, INC., Decision on Appeal. Appeal No. 2005-1693, U.S. Appl. No. Auburn, AL (US) 10/192,333, dated Sep.
    [Show full text]
  • From Syringe to Autoinjector
    Volume 40 Number 6 Blow-Fill-Seal Data Integrity Using Modular JUNE 2016 Volume 40 Number 6 PLUS: Technology Training Construction PHARMACEUTICAL TECHNOLOGY From Syringe to JUNE 2016 2016 JUNE Autoinjector Building a Better Self-Injection Solution PharmTech.com PEER-REVIEWED Qualifying Personnel to Visually Inspect Cleaned Equipment, Part II SINGLE -USE SYSTEMS FORMULATION API SYNTHESIS & MANUFACTURING Integrating Single-Use Systems Customizing HPMC Adoption of Continuous Processing Advancing Drug Delivery Through Superior Polymer Design Safe and effective delivery of today’s complex drug molecules is increasingly a function of collaboration between polymer experts and pharmaceutical product development teams. Acting on enabling science, producing superior polymer excipient technology, and creating systems for optimum bioavailability, Ashland works alongside formulators to advance drug- specific delivery platforms. Explore how you can solve intricate drug formulation and development challenges with polymer expertise from Ashland. Visit us at Ashland.com/pharmaceutical Come visit us at Booth 610 Ashland [email protected] www.ashland.com/pharmaceutical ®Registered trademark, Ashland or its subsidiaries, registered in various countries ™Trademark, Ashland or its subsidiaries, registered in various countries ©2016, Ashland AD-13475.1 “Off-the-shelf solutions? No thank you. After all, our customers are something special.” Daniel Drossel Mechanical Engineering Technician (Design department) Each customer has its very own special requirements. That’s why we, at Optima, manufacture fi lling lines that are fi ne-tuned to our clients’ particular needs while off ering the benefi ts of an integrated and complete line: The complete machine package including high-precision functionalities, backed by consistent documentation and supported by an optimized and tailored software solution – in addition to a central point of contact who is passionate about your every concern… We are experts in special solutions, after all.
    [Show full text]
  • Effects of Different Polymers on Thermal Inkjet Printing of Oral Thin Films: a Novel Approach
    Effects of Different Polymers on Thermal Inkjet Printing of Oral Thin Films: A Novel Approach A project submitted by Rubaiat Ahmed ID: 13146043 Session: Spring 2013 to The Department of Pharmacy in partial fulfillment of the requirements for the degree of Bachelor of Pharmacy (Hons.) Dhaka, Bangladesh September, 2018 This work is dedicated to my parents for their love and constant support. Certification Statement This is to certify that the project titled “Effects of Different Polymers on Thermal Inkjet Printing of Oral Thin Film: A Novel Approach” submitted for the partial fulfillment of the requirements for the degree of Bachelor of Pharmacy (Hons.) from the Department of Pharmacy, BRAC University constitutes my own work under the supervision of Marzia Alam, Lecturer, Department of Pharmacy, BRAC University and that appropriate credit is given where I have used the language, ideas or writings of another. Signed, __________________________________ Counter signed by the supervisor, __________________________________ Acknowledgement All praise is for the Almighty who is the source of our life and strength of our knowledge and wisdom, has helped me to continue my study in full diligence which I hope will reflect in my project. This research could not also have been completed without the support of many people who are gratefully acknowledged here. I am thankful to my honorable supervisor, Marzia Alam, Lecturer, Department of Pharmacy, BRAC University, for her amiability to provide me with untiring guidance, whole cooperation and for her extensive knowledge in research that helped me in all the spheres to perform the project work. I would like to put forward my most sincere regards and profound gratitude to Dr.
    [Show full text]