DOCSLIB.ORG

00 Gauge Material Packs

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
00 Gauge Material Packs 00 Gauge Material Packs 323 - 326 Airbrush Paints 260 Badger Paint Mixer 273 00/4mm Display Case 180 Airbrush Propellant 251 Badger Spare Jars 256 ¼ Hex Drive Drill Bit Set 121 AIRBRUSHES 248 - 251 Badger Spares 255 - 256 ¼ HP Motor & Flexishaft 113 Air-Filter & Reg Gauge 253 Bakers Fluid 245 ¼” Hex Drive Bits 10 Airline Adaptors 253 - 255 Ball End Drivers 20 ¼” Hexagon Drive Keyless 35 Alarm Cable 401 Ball File 129 Chuck Alignment Tool Kit 22 Ball Joint Extractor 58 ¼” Square Drive Sockets 15 Aliphatic Resin 304 Ball Pein Hammers 77 1/24 Scale Display Case 180 Alkaline Batteries 358 Ballast Artificial 313 1/43 Scale Car Display 180 All Purpose Adhesives 294 Ballpoint Pens 189 Case Alphabets Plastic 326 - 327 Ballrace Bearings 353 1:12 & 1:24 Scale Sheet 327 Aluminium Cable Clips 402 Balsa Cement 292 12v Motors 370-371 Aluminium Mitre Box 86 Balsa Stripper 198 2 in 1 Gearbox 371 Aluminium Mitre Box 196 Bandsaw 140 2 Wheel Bandsaw 140 Aluminium Oxide Buff 146 Bandsaw Blades 140 24mm Potentiometers 416 Aluminium Rules 60 - 61 Bar Clamp & Spreaders 213 3 in One Degreaser 381 Aluminium Screw Starters 2 Bar Magnifier 164 3 In One Oils & Greases 378 -379 Aluminium Tape 384 Bar Type Tap Wrench 103 3 Jaw Chuck For Expo 109 Aluminium Torches 156 Handle 3 Jaw Pin Chuck 35 Aluminium Tube 331 - 332 Barrel For Tumblemaster 143 3 Sided Scraper 243 Amber Light 159 Barrette Needle File 89 3 Sided Scrapers 101 Anaerobic Adhesives 289 Base Tweezers 27 3 Way Drill Press Vice 38 Analogue Multimeter 390 Batt & Alternator Analyser 367 3/32” Shank Drill Bits 122 Anant Bullnose Plane 224 BATTERIES-CHARGERS 356-367 4 Blade Scrapers 101 Anant Rabbet Plane 224 Battery 207 4 Jaw Chuck – Unimat 117 Angle Driver 135 Powered Scissors 4” Drive Pin Punch Set 72 Angle Driver ¼” - Hexagon 9 Battery Box With Cover 364 4-IN-1 Cable Tester 391 Angle File 94 Battery Charger 367 5-IN-1 Cable Tester 391 Angle Finders 220 Battery Charger & Tester 367 7.2V Plug & Sockets 405 Angle Measurer 62 Battery Clip 365 90° Angle Keyless Chuck 135 Angle Measurer 220 Battery Clip Contact 365 Angle Plates 67 Battery Contact 365 A Anglin’ Odourless Glue 288 Battery Holder 363-364 Antex Battery Sold Iron 239 Battery Hydrometer 367 A4 A3 A2 A1 & A5 Cutting 192 Antex Energy Regulator 235 Battery Master 367 Mats Antex Gascat Irons 240 Battery Race Packs 362 Abrasive Belt & Disc 142 Antex Gascat Tips 240 Battery Snaps & Clips 365-366 Cleaner Antex High Power Irons 236 Battery Solder Tags 366 Abrasive Blocks 96 Antex Hot Knife 210 Battery Soldering Iron 239 Abrasive Paper Sheets 98 Antex Iron Bits 235 Battery Tester 362 Abrasive Track Rubber 96 Antex Iron Stands 235 Bead Crimping Pliers 40 ABS Boxes 402 Antex Soldering Irons 234 - 235 Bead Reamer 95 ABS Model Wheels 375 Antex Soldering Stations 236 Beading Awl 95 ACM Handles & Knives 197 - 198 Anti Static Cleaning Wipes 382 Beading Tool Set 78 Acrylic Airbrush Medium 268 Antistatic Foam Cleanser 382 Beam Compass 185 Acrylic Paints 262 - 268 Anti-Static Tweezers 28 Beanie Doll Display Case 180 Adaptor - Expo Reliant Drill 109 Antistatic Wrist Strap 384 Bearings 353 Adaptor - Expo Titan Drill 109 Anvils 78 Beechwood Bench Hooks 86 Adaptor Chuck 35 Aprons & Coverall 155 Beeswax Paste 278 Adaptors For Air Hoses 253 - 255 Araldite Adhesives 290 Beeswax Purified 284 Adhesive Foam Pads 384 Arbor & Taper Spindles 147 Bell Wire 400 Adhesive Sleeving 402 Archimedean Drills 33 Belt & Disc Cleaner 142 Adjustable Hole Cutters 133 ARTF Glue Kit 305 Belt & Disc Sander 142 Adjustable Spanners 17 - 18 Artists Colour Wheels 274 Belt & Disc Sander 142 Adjustable Square 69 Atomizer 274 Belt Punches 208 Aero Bond 305 Audio Impedance Tester 390 Bench Anvil 78 Aero Duster 382 Audio Lead Tester 391 Bench Block 73 Aero Klene 50 381 Auto Nightlight 159 Bench Brackets 169 Aerokote 305 Auto Wire Strippers 50 Bench Grinders 148 Aeropoxy 306 Automatic Centre punches 71 Bench Magnifiers 168 - 172 AF Combination Spanners 14 Automatic Pencils 184 Bench Pin & Anvil 81 Agate Burnishers 282 Automotive Fuse 408 Bench Sander 111 Air Blow Gun 255 Aviation Tin Snips 53 Bench Vices 36 Air Brush Cleaners 256 - 257 Awl - Beading 95 Benchwood Mitre Box 86 Air Brush Cleaning Bottle 257 Axle Nut Screwdriver 23 Bending Springs 336 Air Brush Kits 250 Bevel Gears 373 Air Brush Templates 258 B Bevel Protractor Set 66 Air Brush Videos 258 Bevelled Straight Edge 61 Air Brushing Books 257 BA Box Spanners 15 Bevels 219 Air Compressors 251 - 252 BA Nuts & Bolts 349 Bicycle – Spanner & Dumb 15, 22 Air Hose Adaptors 253 - 255 BA Spanners 14 - 15 Bell & Wrench Air Hoses 252 - 253 BA TAPS & DIES 102 Bicycle Spoke Key 22 Airbrush Cleaner Kopykak 260 Badger Airbrushes 248 - 249 Bison Hard Plastics Adhes 291 Airbrush Food Colours 260 Badger Air-Opaque Paints 260 Bison Panel Adhesive 296 Airbrush Holder 257 Badger Braided Hose 253 Black Metal Chain 344 Black Polish 279 Burnishers 96 Chuck Keys 111 Black Steel Pins 344 Burnishing Cream 277 Chucks - Pin 35 Blade Removers 203 Burr Storage Boxes 125 Cigar Lighter Adaptors 404 Blade Sharpener 207 BURS 125 - 127 Cigar Lighter Plug/Sockets 404 Blades – Fretsaw/Piercing 82 - 83 Butane Gas Torches 241 Circle Cutter 199 Blind Rivets 58 Butane/Propane Regulator 242 Circle Templates 187 Block Planes 223 Button Cells 356 Circlip Assortment 351 Blocking Hammer 77 Button Polish 279 Circlip Plier Set 55 Boa Constrictor Strap 106 Buzzers 417 Circuit Lacquer 381 Wrenches Circuit Tester 392 Board Clips 189 C Circular Die Holders 104 Boiler Suit 155 Circular Dies 102 Bolt Cutters 54 C Clamps 212 Circular Fluorescent Tubes 173 Bonding Plug 385 Cabinet Scrapers 224 Circular Glass Cutter 209 Book Light 157 Cabinet Screwdrivers 6 Circular Saw & Router 141 Book Lights 174 Cable 401 Depth Gauges Borax Cone Flux 246 Cable Clips 402 Circular Saw Blades 111 Bore Gauges 65 Cable Cutters & Strippers 50 - 51, 56 Circular Saw Blades - 116 Bottle Cap 180 Cable Tacker 80 Unimat Bottle Lamp Fitting 413 Cable Tie Bases 401 Circular Saw Table – 117 Bottles - Plastic 180 - 181 Cable Ties 401 Unimat Bow Saw 83 Cable Wrap 401 Circular Spirit Level 221 Bowls For Nuts & Screws 105 Caliper Gauges 63 - 64 CK ¼” Hex Angle Driver 9 Box Opening Safety Knife 210 Calipers & Dividers 68 CK Screwdriver Set 4 Box Spanners 15 Camping Lights 157 CK Synthetic Oil 378 Bracelet Gauges 39 Cams 374 CK Wire Strippers 50 Brackets for Motors 371 Canadian Rigger Gloves 154 Clamp - Welding 57 Bradawls 217 Capstan 346 Clamp Set 212 Braided Hose 253 Car Fuse Holder 408 Clamp-On Vices 36 Brass & Copper Cleaner 282 Carbide Tip Scribe 70 CLAMPS 212 - 214 Brass & Copper Polish 283 Carbon Film Resistors 411 Clasps 345 Brass Angle 334 Carpenters Pencil 217 Claw Hammer 78 Brass Archimedean Drills 33 Carpenters Pincers 58 Cleaning Brush - Files 93 Brass Chain 343 -344 Carpenters Squares 219 Cleaning Brush - Parts 106 Brass Cleaning Brush 97 Cartridge Respirators 153 Cleaning Brushes 97 Brass Cleats 345 Carvers - Wax 31 Cleaning Kit 384 Brass Craft Tools 194 Carving & Milling HSS Set 126 Cleaning Solvent 381 Brass Hammer 77 Case Holding Vices 37 Cleaning Strips 380 Brass Hand Vice 34 Cassette Cleaing Fluid 383 Clear Parcel Tape 182 Brass Headed Mallet 76 Cassette Drive Belts 375 Clear Sheet 318 Brass Mesh 347 CD & DVD Marker Pens 190 Cleats 345 Brass Motor Pulley 373 CD Cleaner 383 Clip-On Lamp Adaptor 413 Brass Pins 79 CD Marker Pens 384 Clip-On Worklight 157 Brass Pins 344 CD Scratch Repair Kit 384 Clipt Point Shoe Knife 210 Brass Plated Hinges 345 Cellular Rubber Knee Pads 155 Clock Faces & Numerals 396 Brass Radiator Key 22 Centre Drill Bits 122 Clock Hands 395-396 Brass Rings 341 Centre Nut Spanner 395 Clock Movements 395 Brass Rod 333 Centre Punches 70 - 71 Close Quarter Saw 80 Brass Rudder Hinge 345 Centre Rules 60 Coal Artificial 313 Brass Scratch Brushes 97 Centre Square 70 Co-axial Cable Stripper 51 Brass Sheet 335 Ceramic Adjusters 5 Coin Cell Contact 357 Brass Stanchions 341 Cerium Oxide 143 Coin Cell Holders 357 Brass Strip 334 CHAIN 343 -344 Coin Cell Retainer 357 Brass Tube 333 - 334 Chain & Sprockets 374 Coin Cells 356 Brass Wire 326 Chain Link Fence Mesh 313 Collet Set 111 Brass Wire 340 Chalk Line Marker 222 Collet Set (Metal) - Unimat 117 Breathing & Dust Protection 153 Charcoal Block 243 Colour Wheels 274 Bridge Rectifier 417 Chasing Hammer 77 Coloured Key Tags 160 Bristle Jamb Duster 286 Chassis Mount Battery Box 363 Coloured Poly Sheet 318 Britool BA Spanners 15 Chassis Mount Fuseholder 407 Coloured Wheat Bulbs 411 BROACHES 94 Chassis Mount Socket 403 Combi Map Measurer 396 Broad Point Shoe Knife 210 China Marking Pencils 285 Combination Padlock 160 Bronze Powder 281 Chisel & Guard 101 Combination Spanners 14 Brown Parcel Tape 182 Chisel Knife 285 Combination Square 219 - 220 Brush & Polishing Bit Set 127 Chisel Set 225 Commercial Potentiometer 416 Brush Wash/Holder 273 CHISELS 225 - 226 Compact Disc Cleaners 383 BRUSHES 268 - 270 Chisels - Wood Turning 139 COMPARTMENT BOXES 177 - 178 Brushes 286 Chrome & Plated Finish 144 Compartment Boxes 353 Buff Mops 146 - 147 Polishing Kit Compass & Scriber 218 Buffing Wheels 132 Chubby Ratchet 7 Compass Cutters 199 Bulb & Socket Testers 393 Screwdriver Compass Saw 85 Bulb Pipettes 272 Chuck - Keyless 35 Component Bags 176 Bulb Pipettes 380 Chuck - Keyless 35, 111 Compressor Oil 258 Bullnose Plane 223 Chuck – Quick Hex type 9 COMPRESSORS 251 - 252 Burnisher 224 Chuck - Unimat 117 Concave File 94 Conductive Tweezers 28 D Drawing Sets 185 Conference Badges 160 Drawplate - Jewellers 96 Contact Cleaning Strips 380 D Plugs & Sockets 406 Dremel Multi-Tool 136 Contour
Load more

Recommended publications
  • Metalwork & Woodwork Saws
    HAMMERS - ANVILS - METALWORK & WOODWORK SAWS C HAMMERS BENCH PIN & ANVIL 77 CABLE TACKER GUN 76 DAVID USE PHOTO COPING SAWS 79 SD0010 FRETSAW BLADES 79 FRETSAW FRAMES 79 O HAMMER S & MALLETS 72 - 74 HACKSAWS 76 - 77 MINITURE ANVILS 74 MINITURE PINS 75 MALLET MITRE BOXES 82 PIERCING SAW BLADES 78 PIERCING SAW FRAMES 78 N DAVID USE PHOTO PIN PUSHERS 75 SD0010 RAZOR SAWS 81 SAW BLADE LUBRICANT 78 SAW KNIFE BLADES 81 STAPLE GUNS 75 - 76 V-BLOCK & CLAMPS 77 WEB STRETCHER 82 T ANVILS WOOD SAWS 80 - 81 X-ACTO RAZOR SAWS 81 DAVID USE PHOTO ZONA RAZOR SAWS 79 SD0010 E SAWS N DAVID USE PHOTO SD0010 T V BLOCK & CLAMP DAVID USE PHOTO SD0010 S Last Revised 04/07/2011 71 SQUIRES MODEL & CRAFT TOOLS HAMMERS & MALLETS MAGNETIC TACK HAMMER 6oz a specially designed hammer having one striking face magnetised for use when fitting small nails JEWELLERS MALLET a lightweight stainless steel mallet similar and upholstery tacks. The head features a claw for removing to those used by watchmakers and jewellers, with a solid head and tacks, the striking surface is a magnetic split pattern. The head is knurled shaft. hardened and pol- Length 145mm. ished. Fitted on a Weight 2½oz. hickory handle. Weight 6oz, length overall CODE TYPE PRICE 265mm. HA0025 Jewellers Mallet.................................................... £3.99 WATCHMAKERS MALLET a lightweight jewellers and watch- CODE TYPE PRICE makers mallet with a solid brass head. The handle is 260mm long 051-006 Magnetic Tack Hammer 6oz................................. £14.99 and has an increased diameter and is knurled for extra grip.
    [Show full text]
  • A Woodworker's Wish List
    A Woodworker’s Wish List Brighten the holidays with these great gifts By Joe Hurst-Wajszczuk Having a woodworker on and accessories we wish your gift list is both a blessing we had bought sooner. The and a curse. While there is result is a selection suitable no shortage of new tools for woodworkers of all skill and accessories, the trick is levels. So if you’ve got family selecting items that will get members or friends who are used, rather than sit on a shelf. woodworkers, skip the ties, For inspiration, we collected socks, scarves, and cologne. Give gift-giving advice from fellow some gifts that keep on giving, woodworkers and added our now and for years to come. own insights about the tools Photos: Larry Hamel-Lambert Dec/Jan 2016 woodcraftmagazine.com 43 Marking & Measuring Go to the Buyer’s Guide on p. 66 for prices and ordering informati on for featured items. Super-stable square $40 Compared to a combinati on square, the Veritas Sliding Square’s 3"-wide blade provides a more substanti al reference face for transferring measurements. With the collar removed, the accurately machined blade is also useful as a fl at square. Tighter tolerances $42 The Wixey Dual Display Caliper Make your mark $15 simultaneously displays decimal The name’s a curve ball, but the and fracti onal measurements benefi ts go straight to the heart (to the nearest 64th of an of precise layout. The Pica-Dry inch). Adding a WoodRiver Pen is a mechanical pencil that Depth Gauge ($20) turns works on most surfaces, including any caliper into a super- wet wood, glass, and ti le.
    [Show full text]
  • LED-Reading Lamp Metal
    111.264 LED-Reading lamp Metal Necessary tools: Metal drills ø2,5/3/4/6 mm Thread Tap M3mm 90°-Countersink Fretsaw with blade for metal File assortment Vice with jaw protectors Pencil Ruler Soldering iron Screwdriver Please Note The OPITEC range of projects is not primarily inten- ded as toys for young young children. It is for teaching, designing and making to ensure that puplis experience a range of tools and processes PARTS LIST Stückzahl Size (mm) Description Teile-Nr. Aluminium sheet 1 150x80x1 Housing 1 Aluminium rectangle 1 75x20x10 Housing 2 USB-LED-Lamp 1 Lighting 3 Micro slide switch 1 19x6 Switch 4 Alumnium wire 1 250x1,6 Clip 5 Machine screw 8 10x3 Lamp fixing 6 Machine screw 1 16x3 Lamp fixing 7 Nuts 2 M3 Switch fixing 8 Washers 6 M3 Fixing 9 Clips 1 3-7 Lamp fixing 10 Battery clip 1 Connection 11 Widerstand 220 Ohm 1 Vorwiderstand 12 D111264#1 1 INSTRUCTIONS General: For cutting the aluminium sheet use a fretsaw with a metal cutting blade 1. Cut the Aluminium-sheet (1) to the pattern (Page 3 ) with a fretsaw. Round the edges with a file and drill the holes ø3 + ø4 as shown in the pattern . Make the slot for the switch. To do this drill this make 3mm dia holes and then use a fretsaw File and clean up the edges, use a countersink to clean up any burr on the Top Bottom holes Note: For better drilling results, frstly bend the top and the bottom and then drill the 4mm dia holes togeher 2.
    [Show full text]
  • Application of a Novel Osteotomy Instrumentation As a Substitute Tool in Total Hip Arthroplasty
    Application of a Novel Osteotomy Instrumentation as a Substitute Tool in Total Hip Arthroplasty Yuehao Hu Shanghai Ninth People's Hospital Jingwei Zhang Shanghai Ninth People's Hospital Ziyang Sun Shanghai Sixth People's Hospital Degang Yu Shanghai Ninth People's Hospital Huiwu Li Shanghai Ninth People's Hospital Zhenan Zhu Shanghai Ninth People's Hospital Yuanqing Mao Shanghai Ninth People's Hospital Mengning Yan Shanghai Ninth People's Hospital Zanjing Zhai ( [email protected] ) Shanghai Ninth People's Hospital Research Article Keywords: Total hip arthroplasty, osteotomy instrumentation, femoral neck osteotomy Posted Date: May 27th, 2021 DOI: https://doi.org/10.21203/rs.3.rs-539000/v1 License: This work is licensed under a Creative Commons Attribution 4.0 International License. Read Full License Page 1/13 Abstract Background: Mechanical failure, power shortage, and unexpected contamination of oscillating saw occasionally happened in actualizing femoral neck osteotomy during total hip arthroplasty, while no appropriate alternative solution be available presently. This study aimed to introduce a novel osteotomy instrumentation (fretsaw, jig, cable passer hook) as a substitute tool while oscillating saw was unavailable in THA. Methods: This study included 40 patients (40 hips) who underwent femoral neck osteotomy during primary THA using the new osteotomy instrumentation (n=20) and oscillating saw (n=20). Clinical data and intraoperative ndings of all patients were evaluated. Results: The mean osteotomy time was 22.3 ± 3.1 s (range, 17–30 s) and 29.4 ± 3.7 s (range, 25–39 s) in the oscillating saw group and the new osteotomy instrumentation group, respectively (P<0.001).
    [Show full text]
  • PLUMBING DICTIONARY Sixth Edition
    as to produce smooth threads. 2. An oil or oily preparation used as a cutting fluid espe cially a water-soluble oil (such as a mineral oil containing- a fatty oil) Cut Grooving (cut groov-ing) the process of machining away material, providing a groove into a pipe to allow for a mechani cal coupling to be installed.This process was invented by Victau - lic Corp. in 1925. Cut Grooving is designed for stanard weight- ceives or heavier wall thickness pipe. tetrafluoroethylene (tet-ra-- theseveral lower variouslyterminal, whichshaped re or decalescensecryolite (de-ca-les-cen- ming and flood consisting(cry-o-lite) of sodium-alumi earthfluo-ro-eth-yl-ene) by alternately dam a colorless, thegrooved vapors tools. from 4. anonpressure tool used by se) a decrease in temperaturea mineral nonflammable gas used in mak- metalworkers to shape material thatnum occurs fluoride. while Usedheating for soldermet- ing a stream. See STANK. or the pressure sterilizers, and - spannering heat resistantwrench and(span-ner acid re - conductsto a desired the form vapors. 5. a tooldirectly used al ingthrough copper a rangeand inalloys which when a mixed with phosphoric acid.- wrench)sistant plastics 1. one ofsuch various as teflon. tools to setthe theouter teeth air. of Sometimesaatmosphere circular or exhaust vent. See change in a structure occurs. Also used for soldering alumi forAbbr. tightening, T.F.E. or loosening,chiefly Brit.: orcalled band vapor, saw. steam,6. a tool used to degree of hazard (de-gree stench trap (stench trap) num bronze when mixed with nutsthermal and bolts.expansion 2. (water) straightenLOCAL VENT.
    [Show full text]
  • United States National Museum
    SMITHSONIAN INSTITUTION UNITED STATES NATIONAL MUSEUM BULLETIN 2 30 WASHINGTON, D.C. 1964 MUSEUM OF HISTORY AND TECHNOLOGY The Bark Canoes and Skin Boats of North America Edwin Tappan Adney and Howard I. Chapelle Curator of Transportation SMITHSONIAN INSTITUTION, WASHINGTON, D.C. 1964 — Publications of the United States National Aiuseum The scholarly and scientific publications of the United States National Museum include two series, Proceedings of the United States National Museum and United States National Museum Bulletin. In these series the Museum publishes original articles and monographs dealing with the collections and work of its constituent museums—The Museum of Natural History and the Museum of History and Technology setting forth newly acquired facts in the fields of Anthropology, Biology, History, Geology, and Technology. Copies of each publication are distributed to libraries, to cultural and scientific organizations, and to specialists and others interested in the different subjects. The Proceedings, begun in 1878, are intended for the publication, in separate form, of shorter papers from the Museum of Natural History. These are gathered in volumes, octavo in size, with the publication date of each paper recorded in the table of contents of the volume. In the Bulletin series, the first of which was issued in 1875, appear longer, separate publications consisting of monographs (occasionally in several parts) and volumes in which are collected works on related subjects. Bulletins are either octavo or quarto in size, depending on the needs of the presentation. Since 1902 papers relating to the botanical collections of the Museum of Natural History have been published in the Bulletin series under the heading Contributions Jrom the United States National Herbarium, and since 1959, in Bulletins titled "Contributions from the Museum of History and Technology," have been gathered shorter papers relating to the collections and research of that Museum.
    [Show full text]
  • 2016 Affinity Tool Works Dealer Price Book Rev 20 Xlsx
    2016 PRODUCT CATALOG Prices Effective January 1, 2016 Supersedes all previously dated price lists. No. 20 Prices subject to change without notice. Affinity Tool Works, LLC • 1161 Rankin • Troy, Michigan 48083 Ph(248) 588-0395 • Fax(248) 588-0623 • [email protected] • www.affinitytool.com Pkg www.boratool.com Stock No. Description Part No. List Price Qty BORA Clamps & Vises 540445 4.5" Micro Bar Clamp (2-Pack) 6$ 10.91 540606-S 6" Midi Pistol Grip Clamp 6$ 12.64 540606 6" Midi Pistol Grip Clamp (2-Pack) 6$ 23.64 540612-S 12" Midi Pistol Grip Clamp 6$ 15.45 540612 12" Midi Pistol Grip Clamp (2-Pack) 6$ 30.00 540806 6" Pistol Grip Bar Clamp 6$ 19.09 540812 12" Pistol Grip Bar Clamp 6$ 20.91 540818 18" Pistol Grip Bar Clamp 6$ 28.18 540824 24" Pistol Grip Bar Clamp 6$ 30.00 BORA Specialized Clamps & Vises 540520 20 Piece Mini Spring Clamp Set 1$ 10.00 551025 Corner Clamp 6$ 30.00 551027 Large Vise 6$ 30.00 BORA Angle Master Miter Duplicator for Mitersaws 530301 Angle Master - Miter Duplicator 3$ 65.45 BORA Sharpening Stones 501057 Sharpening Stone-Aluminum Oxide 6" x 2" x 1" 30$ 4.47 501098 Sharpening Stone-Green Silicon Oxide 6" x 2" x 1" 30$ 8.73 501060 Sharpening Stone-Aluminum Oxide 8" x 2" x 1" 30 $ 8.90 Page 2 © 2016 Affinity Tool Works, LLC Pkg Stock No. Description List Price Qty BORA Modular Clamp Edge & Accessories 543100 100" WTX Clamp Edge (50" + 50") 6$ 99.00 543050 50" WTX Clamp Edge 6$ 53.00 543036 36" WTX Clamp Edge 6$ 46.00 543024 24" WTX Clamp Edge 6$ 40.00 Kits: 543300 3 pc Clamp Edge Set, 24, 36, 50" 4$ 134.00 543400
    [Show full text]
  • Tools and Their Uses NAVEDTRA 14256
    NONRESIDENT TRAINING COURSE June 1992 Tools and Their Uses NAVEDTRA 14256 DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. Although the words “he,” “him,” and “his” are used sparingly in this course to enhance communication, they are not intended to be gender driven or to affront or discriminate against anyone. DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. NAVAL EDUCATION AND TRAINING PROGRAM MANAGEMENT SUPPORT ACTIVITY PENSACOLA, FLORIDA 32559-5000 ERRATA NO. 1 May 1993 Specific Instructions and Errata for Nonresident Training Course TOOLS AND THEIR USES 1. TO OBTAIN CREDIT FOR DELETED QUESTIONS, SHOW THIS ERRATA TO YOUR LOCAL-COURSE ADMINISTRATOR (ESO/SCORER). THE LOCAL COURSE ADMINISTRATOR (ESO/SCORER) IS DIRECTED TO CORRECT THE ANSWER KEY FOR THIS COURSE BY INDICATING THE QUESTIONS DELETED. 2. No attempt has been made to issue corrections for errors in typing, punctuation, etc., which will not affect your ability to answer the question. 3. Assignment Booklet Delete the following questions and write "Deleted" across all four of the boxes for that question: Question Question 2-7 5-43 2-54 5-46 PREFACE By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected reading, and your desire to succeed are also necessary to successfully round out a fully meaningful training program. THE COURSE: This self-study course is organized into subject matter areas, each containing learning objectives to help you determine what you should learn along with text and illustrations to help you understand the information.
    [Show full text]
  • MASTER CATALOG Tools for the Remodeling, Restoration and Building Trades
    HydeCatalog 9/7/07 11:14 AM Page 1 MASTER CATALOG Tools for the Remodeling, Restoration and Building Trades For a better finish, start with HYDE™. HydeCatalog 9/7/07 11:14 AM Page 2 by memorable merchandising product strength and durability Serious and advertising directly to are often backed by a lifetime Tools for your customers. guarantee. America’s Favorite Brand Tap into the loyal following PAINT & SURFACE PREP 5 Serious Our brand strength has never Hyde Tools has been building for Spray Tools, Paint Shields, Scrapers, Putty been stronger in paint and wall- generations. Stock HYDE® brand Knives, Multi-use Tools, Cleaning Brushes Sales covering hand tools. HYDE® is tools and you can be sure your REPAIR 35 America’s favorite brand in these customers will come back RePairs™ Value Packs, Wall Repair Tools, Caulk categories, chosen two to one by frequently and buy often. Repair Tools, Glass Repair Tools Growth contractors over any other brand DRYWALL 45 HYDE® is the brand of choice for for scraping, patching, taping Are You Serious About ® Joint Knives, Taping Knives, Corner Tools, retailers and wholesalers who and coating surfaces. Whether Sales? Get HYDE Pointing Knives, Hawks, Mixers, Mud Pans, are serious about growing sales. purchased by professionals or Call our customer service Saws, Joint Tape Our high-quality tools are com- homeowners, our tools are department at 800-USA-HYDE MASONRY & CONCRETE 67 petitively priced and supported considered “serious tools for (872-4933) or 508-764-4344 Concrete, Cement and Brick Tools: Trowels, serious users.” Our superior for details. Pointers, Edgers, Groovers, Floats WALLCOVERING 75 Scoring Tool, Shavers, Scrapers, Shears, Brushes, Guides, Smoothing Tools, Rollers Every label bears the distinctive HYDE® branding.
    [Show full text]
  • The Carousel for Precision Grinding Wheels Mitsubishi Electric Europe B.V
    The smart magazine for users Profile Issue 01 · October 2013 35 The carousel for precision grinding wheels Mitsubishi Electric Europe B.V. 38 Slashing machining time by 20 hours Eric Huyghe Formenbau 50 Almond crescents launch bespoke machine building Bott GmbH Contents Contents Contents 50 Almond crescents launch bespoke machine building 60 Moving up into the world league The flavour of success Injection moulds with up to 96 components Bott GmbH ERMO GROUP 56 Uncharted territory Exploring materials right at the machine Empa 06 We are all members of the Möderer family 30 Getting it right first time 75 years, 34 employees and a simple explanation Leaving nothing to chance Hans Möderer Werkzeug- & Formenbau GmbH Walter Pottiez GmbH 12 Intelligent clamping makes all the difference 35 The carousel for precision grinding wheels The key to success lies in good preparation Micrometre precision for the dressing of grinding wheels Aldrovandi AG Mitsubishi Electric Europe B.V. 18 Rust protection with water 38 Slashing machining time by 20 hours 04 Editorial 43 Profile magazine Banishing the risk of rust From 50 to 30 thanks to the MV2400R You’ve missed one of our issues? No problem! Chia-mo Srl Eric Huyghe Formenbau 05 Newsflash 65 Origami 24 Cutting diamonds with precision 44 Tooth for tooth – geared for success The art of mechanics and material Solutions for high-performance machining A Top 100 SME reports Lütticke GmbH Neugart GmbH 11 Competition 66 User horoscope 02 Profile 08.2013 Profile 08.2013 03 Editorial Latest developments HANS-JÜRGEN PELZERS Newsflash Editorial Only walking on air is better … Rapid relief for flood victims LED screens so large they can be measured Any customer who manages to cut machining time for a tool from 50 hours to in wingspans 30 will be walking on air (page 36).
    [Show full text]
  • · Arrett Hack
    · �ARRETT HACK Photographs by John.S. Sheldon The HANDPLANE Book The HANDPLANE Book GARRETT HACK Photographs by John S. Sheldon TheTauntonrn Press TauntonBOOKS & VIDEOS forfellow enthusiasts © 1999 by The Taunton Press, Inc. All rights reserved. Printed in the United States of America 10 9 8 7 6 5 4 3 2 1 The Handplane Book was originally published in hardcover © 1997 by The Taunton Press, Inc. The Taunton Press, Inc., 63 South Main Street, PO Box 5506, Newtown, CT 06470-5506 e-mail: [email protected] Distributed by Publishers Group West. Library of Congress Cataloging-in-Publication Data Hack, Garrett. The handplane book / Garrett Hack. p. cm. "A Fine woodworking book" - T.p. verso. Includes bibliographical references and index. ISBN 1-56158-155-0 hardcover ISBN 1-56158-317-0 softcover 1. Planes (Hand tools). 2. Woodwork. I. Title. TT186.H33 1997 684'.082 - dc21 97-7943 CIP About Your Safety Working wood is inherently dangerous. Using hand or power tools improperly or ignoring standard safety practices can lead to permanent injury or even death. Don't try to perform operations you learn about here (or elsewhere) unless you're certain they are safe for you. If something about an operation doesn't feel right, don't do it. Look for another way. We want you to enjoy the craft, so please keep safety foremost in your mind whenever you're in the shop. To Helen and Vinny who saw the possibilities, Ned who encouraged me, and Hope who has kept me tuned and planing true ACKNOWLEDGMENTS No one can hope to bring together a book Helen Albert, for her insights and Noel Perrin, for his insights about all like this without help.
    [Show full text]
  • Measuring & Marking Tools
    Measuring & Marking Tools Dividers & Callipers • Dividers are instruments that can be used to transfer measurements directly from a rule, to measure distances on a map, or to scribe an arc or a circle. • Wing dividers feature a curved steel bar to separate the legs, while the distance is set with a lock nut. • Callipers (inside or outside) work in the same way, but are designed for measurement, rather than marking. 3170 3170-SS 3175-SS STRAIGHT EDGE STAINLESS STEEL STRAIGHT EDGE S/STEEL STRAIGHT EDGE IN WOODEN CASE • Manufactured from carbon steel • Stainless steel • Stainless steel • Made with one squared edge and one bevelled edge • Finely polished • Finely polished • Comes in graduated (mm) or plain without graduation • Made with one squared edge and one bevelled edge • Square on both edges • Sizes up to 2000 mm are chromated, 3000 mm lengths • Comes in graduated (mm) or plain with no graduation • Permanently etched graduations are finely polished • Removable positioning/carrying knob/s • Includes calibration certificate • Comes in wooden case • In accordance to DIN 866/1 standards (tolerance - 0.04 mm/m) Hang Display (t((tolerancetoololeolerllelereerraancanceanncennccece --0 00.04.04.0.0404 mm/mmmmm/mmm/m)m/mmm//m/m) Removable positioning/carrying knob/s NOTE: Supplied with cat.-no. length (mm) section (mm) knobs Calibration certificate. (Tolerance - 0.04 mm/m) Graduated (mm) 3170-M-SS-500 500 40 x 3 1 cat.-no. length (mm) section (mm) 3170-M-SS-1000 1000 50 x 4 2 3175-SS-A-500 500 30 x 6 3170-M-SS-1500 1500 50 x 4 2 3175-SS-A-1000 1000 40 x 8 3170-M-SS-2000 2000 50 x 4 2 Plain, no graduation 1511 3170-P-SS-500 500 40 x 3 1 3170-P-SS-1000 1000 50 x 4 2 WING DIVIDER 3170-P-SS-1500 1500 50 x 4 2 • High quality forged steel • Heavy rivet and box joint mechanism Hang 3170-P-SS-2000 2000 50 x 4 2 • All polished Display cat.-no.
    [Show full text]