DOCSLIB.ORG

2014/15 Product Catalog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
2014/15 Product Catalog 2014/15 PRODUCT CATALOG Prices Effective August 1, 2014 Supersedes all previously dated price lists. No. 17 Prices subject to change without notice. Affinity Tool Works, LLC • 1161 Rankin • Troy, Michigan 48083 Ph(248) 588-0395 • Fax(248) 588-0623 • [email protected] • www.affinitytool.com Pkg www.boratool.com Stock No. Description Part No. List Price Qty BORA Clamps & Vises 540445 4.5" Micro Bar Clamp (2-Pack) 6 $ 10.91 540603 Pistol Grip Set included 3 each of 6" and 12" 1 $ 81.82 540606-S 6" Midi Pistol Grip Clamp 6 $ 12.64 540606 6" Midi Pistol Grip Clamp (2-Pack) 6 $ 23.64 540612-S 12" Midi Pistol Grip Clamp 6 $ 15.45 540612 12" Midi Pistol Grip Clamp (2-Pack) 6 $ 30.00 540806 6" Pistol Grip Bar Clamp 6 $ 19.09 540812 12" Pistol Grip Bar Clamp 6 $ 20.91 540818 18" Pistol Grip Bar Clamp 6 $ 28.18 540824 24" Pistol Grip Bar Clamp 6 $ 30.00 540836 36" Pistol Grip Bar Clamp 6 $ 35.00 540170 7 Piece Clamp Set: 6" Midi Clamp (2), 12" Midi Clamp (2), 18" Bar Clamp, 24" Bar Clamp, 36" Bar Clamp 1 $ 140.00 550602 Clamp Plate 6 $ 12.73 550601 Clamp Extenders 6 $ 10.00 BORA Specialized Clamps & Vises 540520 20 Piece Mini Spring Clamp Set 1 $ 10.00 551025 Corner Clamp 6 $ 30.00 551027 Large Vise 6 $ 30.00 BORA Clamp Edge 540924 24" Clamp Edge 6 $ 36.36 540936 36" Clamp Edge 6 $ 41.82 540950 50" Clamp Edge 6 $ 47.27 540903 3 Piece Clamp Edge Set: 24", 36" & 50" 6 $ 121.82 540902 2 Pc Bora Clamp Set 6 $ 76.36 540024 24 Piece Displayer 1 $ 80.00 BORA Clamp Edge Wide Track & Accessories 541024 24" Clamp Edge Wide Track 6 $ 44.55 541042 42" Clamp Edge Wide Track 6 $ 56.36 541050 50" Clamp Edge Wide Track 6 $ 65.45 541066 66" Clamp Edge Wide Track 6 $ 80.00 541100 100" Clamp Edge Wide Track 6 $ 130.91 541000 24 Piece Wide Track Displayer 1 $ 83.00 542003 Wide Track Router Guide Plate 6 $ 23.64 542002 Wide Track Auxiliary Clamp, pair 6 $ 16.82 Page 2 © 2014 Affinity Tool Works, LLC Pkg Stock No. Description List Price Qty BORA Modular Clamp Edge & Accessories 543100 100" WTX Clamp Edge (50" + 50") 6 $ 99.00 543050 50" WTX Clamp Edge 6 $ 53.00 543036 36" WTX Clamp Edge 6 $ 46.00 543024 24" WTX Clamp Edge 6 $ 40.00 Accessories: 542060 50" Add on Track with connectors 6 $ 46.00 542035 25" Add on Track with connectors 6 $ 32.00 542010 Set of Connectors 6 $ 13.00 542006 WTX Saw Plate 6 $ 29.00 542007 Rip Guide attachment 6 $ 20.00 BORA Angle Master Miter Duplicator for Mitersaws 530301 Angle Master - Miter Duplicator 3 $ 65.45 BORA Squares 530008 8" Multi Angle Square, Composite/Poly, 408 6 $ 15.45 530208 8" Multi Angle Square, Aluminum/Stainless Square, 808 6 $ 40.00 530212 12" Multi Angle Square, Aluminum/Stainless Square 812 6 $ 42.73 531008 8" Try Square with Pre-Set Miter Guides & Stability Ledge 6 $ 8.45 531012 12" Try Square with Pre-Set Miter Guides & Stability Ledge 6 $ 10.27 531310 8" Try Square & T-Bevel Set 6 $ 15.45 531301 7.5" T-Bevel with vial 6 $ 8.45 531120 12" Combination Square with magnetic lock 6 $ 25.00 BORA Sharpening Stones 501057 Sharpening Stone-Aluminum Oxide 6" x 2" x 1" 6 $ 4.92 501098 Sharpening Stone-Green Silicon Oxide 6" x 2" x 1" 6 $ 9.60 © 2014 Affinity Tool Works, LLC Page 3 Pkg Stock No. Description Part No. List Price Qty BORA Traditional Woodworking Tools 540519 9" Carpenters Bevel 6 $ 22.73 560019 Marking Gauge, Beechwood 6 $ 18.09 560101 Mortice/Marking Gauge, Beechwood 6 $ 27.73 560509 6" Try Square, Beechwood 6 $ 18.64 560516 7.5" Try Square, Beechwood 6 $ 20.00 560523 9" Try Square, Beechwood 6 $ 20.91 504FSK 3pc Marking and Measuring Set 6 $ 63.64 Includes Mortice Gauge, 9" Bevel, and 9" Try Square 502FSK 3pc Marking and Measuring Set 6 $ 77.27 Includes Mortice Gauge, 7.5" Bevel, and 6" Try Square 540049 4-1/2" Beechwood Mallet 6 $ 23.00 BORA Metal Conditioning Products STN-BBC500 Restore Blade & Bit Cleaner 500ML 6 $ 30.45 STN-HR1125 Honerite #1 125ML 6 $ 18.18 STN-HRG250 Hone Right Gold 250ML 6 $ 26.82 STN-MGU250 Metalguard Ultra 250ML 6 $ 25.91 STN-PTW100 Protectool Wax Polish 100ML 6 $ 18.18 STN-RPC250 Restore Pre-Clean 250ML 6 $ 24.09 STN-RRG250 Restore Rust Remover Gel 250ML 6 $ 26.82 STN-RRR250 Restore Rust Remover 250ML 6 $ 26.82 STN-TVE003 Toolguard VCI Emitter 3PK 6 $ 21.82 BORA Tool Roll 503110 11 Pocket Genuine Suede Leather Tool Roll 6 $ 21.82 Page 4 © 2014 Affinity Tool Works, LLC Pkg Stock No. Description Part No. List Price Qty FOOTPRINT 87 Series Chisels 127005 Blue Poly Handle Chisel - 1/8" 6 $ 21.50 127029 Blue Poly Handle Chisel - 1/4" 6 $ 17.84 127036 Blue Poly Handle Chisel - 3/8" 6 $ 18.20 127050 Blue Poly Handle Chisel - 5/8" 6 $ 19.26 127062 Blue Poly Handle Chisel - 3/4" 6 $ 19.62 127043 Blue Poly Handle Chisel - 1/2" 6 $ 18.56 127074 Blue Poly Handle Chisel - 7/8" 6 $ 20.54 127081 Blue Poly Handle Chisel - 1" 6 $ 21.02 127098 Blue Poly Handle Chisel - 1-1/4" 6 $ 29.00 127104 Blue Poly Handle Chisel - 1-1/2" 6 $ 35.10 127127 Blue Poly Handle Chisel - 2" 6 $ 41.90 127142 Blue Poly Handle Chisels, 4 Piece Set: 1/4", 1/2", 3/4", 1" 487 4 $ 64.00 127197 6 Piece Blue Poly Handle Chisel Set: 1/4', 3/8", 1/2", 5/8", 3/4", 1" 687 4 $ 95.40 127463 6 Piece Blue Poly Handle Chisel Set in Wooden Box: 687B 4 $ 106.00 1/4", 3/8", 1/2", 5/8", 3/4", 1" FOOTPRINT Chisels and Chisel Sets 306FSK Wood Storage Box for 6 Chisels (chisels not included) 306FSK 1 $ 60.00 Fits Series 85, 86, 87 & 565 Chisels 309FSK 9-Pocket Nylon/Leather Tool Roll (chisels not included) 309FSK 1 $ 36.00 311FSK 11-Pocket Leather and Nylon Tool Roll (chisels not included) 311FSK 1 $ 38.00 FOOTPRINT Chisel Guards 160293 Chisel Guards: 1/4", 3/8", 1/2", 5/8", 3/4" & 1" 681 6 $ 8.70 FOOTPRINT Measuring & Marking 40014 7-1/2" Carpenters Bevel with Rosewood Handle 1253 6 $ 30.00 40021 9" Carpenters Bevel with Rosewood Handle 1253 6 $ 33.00 40038 10-1/2" Carpenters Bevel with Rosewood Handle 1253 6 $ 39.00 380066 6" Square with Rosewood Handle and Brass Accents 1248 6 $ 32.00 380073 7-1/2" Square with Rosewood Handle and Brass Accents 1248 6 $ 35.50 380097 9" Square with Rosewood Handle and Brass Accents 1248 6 $ 39.50 380103 10-1/2" Square with Rosewood Handle and Brass Accents 1248 6 $ 43.00 160200 Rosewood Mortice/Marking Gauge 1877 6 $ 68.00 303FSK 3-Piece Rosewood & Brass Set: 1877 Mortice / Marking Gauge, 303FSK 1 $ 145.00 1253 9" Carpenters Bevel, 1248 9" Rosewood Square © 2014 Affinity Tool Works, LLC Page 5 Pkg Stock No. Description Part No. List Price Qty FOOTPRINT Planes 280113 Mini Trimming Plane - 3" x 1" 200T 12/48 $ 12.86 280014 Low Angle Block Plane; 60-1/2 Degree Iron, 6-5/8" x 1-3/4" 60-1/2 1/20 $ 51.00 280021 Professional Block Plane, 7" x 2" 220B 1/20 $ 42.00 280205 Professional Wood Handle Smooth Plane - 9-3/4" x 2" 4B 1/10 $ 64.00 280106 Professional Wood Handle Jack Plane - 14" x 2" 5B 1/10 $ 79.00 305FSK Set of (3) Planes: 220B Block, 4B Smooth & 5B Jack 305FSK 1 $ 172.00 283022 Set of (4) Planes: 60-1/2" Low Angle Block, 220B Block, 302FSK 1 $ 199.00 4B Smooth & 5B Jack 280052 Replacement blade for 220B, 220H - 1-5/8" Wide 922 10 $ 9.00 280410 Replacement blade for 4B, 5B, 4H, 4ER - 2" Wide 544 10 $ 11.88 125909 Replacement Wood Handle for 4B/5B Plane 1 $ 13.00 126070 Replacement Wood Knob for 4B/5B Plane 1 $ 7.80 FOOTPRINT Honing Guide 990500 Honing Guide for Hand Plane Blades & Wood Chisels 990500 8 $ 13.00 FOOTPRINT Specialty Hand Tools 160286 Tack Lifter 2651 12 $ 15.00 210103 Hacking Knife 2651 12 $ 15.00 210109 Hacking Knife Sheath - Leather, Belt Loop 182 6 $ 9.00 210111 Hacking Knife with Sheath 1 $ 31.50 210806 Shoe Knife 2022 12 $ 12.00 71209 Brad Awl - 1-1/4" 361 12 $ 10.44 160507 Square Awl - 1-1/2" 360 12 $ 11.50 Hand Drills 60111 Ratchet Brace 1 $ 150.00 Hammers 190672 4 oz. Warrington Hammer, Hickory Handle 4 $ 24.60 190634 8 oz. Warrington Hammer, Hickory Handle 4 $ 21.50 190658 12 oz Warrington Hammer, Hickory Handle 4 $ 25.30 190665 16 oz. Warrington Hammer, Hickory Handle 4 $ 27.30 Page 6 © 2014 Affinity Tool Works, LLC Pkg Stock No. Description Part No. List Price Qty FOOTPRINT Scutch Chisels & Bits 160491 Scutch Chisel - 1" 578 6 $ 60.48 160347 Scutch Chisel with Grip - 1" 579 3 $ 66.96 160439 Scutch Chisel - 1-1/2" 578 6 $ 62.64 160453 Drove Bits - 1-1/2" (10 Pieces) 5781 10 $ 16.20 160460 Scutch Bits - 1-1/2" (10 Pieces) 5782 10 $ 16.20 110014 3" Brick Chisel 1236 6 $ 21.74 110021 4" Brick Chisel 1236 6 $ 27.00 112506 Flooring Chisel 2700 6 $ 17.28 112513 Flooring Chisel with Grip 2701 3 $ 24.90 113015 Concrete Point Chisel with Grip 582 3 $ 24.90 116009 2-1/2" Masonry Stone Chisel, "Extra Thick Blade" 1235 3 $ 29.90 FOOTPRINT Wrenches 440098 9" Pipe Wrench 698 6 $ 38.00 440122 12" Pipe Wrench 698 3 $ 54.00 441096 9" Thumb Turn Pipe Wrench 900 6 $ 47.00 Burnishing Tools 410024 Steel Burnishing Tool, Rosewood Handle Pax 1 $ 40.50 Scraper Sets 410025 Shaped Scraper Set (4 Piece): Concave/Convex Gooseneck, Pax 6 $ 25.00 5" x 2-1/2" Square & Double Curved 410026 Square Scraper, 3 Piece Set: 4 "x 2", 5 x 2-1/2" & 6"x3" Pax 6 $ 25.00 410062 Concave Scraper Set (2 Piece) Lynx 6 $ 17.50 410063 Convex Scraper Set (2 Piece) Lynx 6 $ 17.50 410077 Quadrant / Cabinet Square Scraper Set Lynx 6 $ 17.50 © 2014 Affinity Tool Works, LLC Page 7 Pkg Stock No.
Load more

Recommended publications
  • The Sunday Stab'. Washington P. P„ Mat 30, 1926—Tort 6
    AUTO MOB ICES* ETC. THE SUNDAY STAB'. WASHINGTON P. P„ MAT 30, 1926—TORT 6. MISCErCXNBOHS. 3 ETC. FOR SALE—AUTOMOBILES. FOR RENT—GARAGES. BUSINESS OPPORTUNITIES. FOB SALE—MISCELLANEOUS. FOB BALE—MISCELLANEOUS. 1 FOB SALE—MISCELLANEOUS. _ POfiS. PETS. RENT ROOMS—FURNISHED. (Continued.) _ nod.) good PUPPIES, best - (Continued.) . (Continued.) _ (Con tin guitar, «et~(H do*.) Havi- brass gas. for sale; FOX TERRIER wire-haired: ACOtJSTICON. FURNITURE—WaInut bed. double STOVE—Five-burner, reglatered 8533, ' BILTMORE. BUICK coupe, late fine condition: bal- REAR 1616 L ST. CARS. .$40.00 ) WANTED TO BUY—Rooming house: must land china, rack and furniture of 4- bed. complete walnut bookcase, unit aec-1 condition: I7ai at. n.w. Phone Block. Col. Apt. 16—Room for ladv model: ¦ N.W.. 6 hau » *3. 9th Ifit”a, tlve y as loon tires. Rear 1512 L st. n.w 11-59 ) be cheap; part cash; not ovsr 10 rooms. room apartment. Tel. Col. 6145-W. tional bookcase, mahogany pedestals, tables, | North 9166. AIREDALE PUPPIES. 2 months: pedigree**: of™, i furnished bed-living room: 7-passeneer: fine running : Rear 424 L n.w. single oak wardrobe, odd pieces; in good collar, registered beauties; $lB- n 9um mer: warm in quiet: CADILLAC. st. n.w 25.00 ) section. Address Box 12-Z. Star .office. ANTIQUE CENTER TABLE, banquet top, all SUIT, gray. English tweed, raccoon best stock; sls and near, SkZ. Itwo car Winter: enter. Rear 1611 22nd st. n.w 8.60 walnut; princess condition: cheap. 1212 Euclid st. n.w. 31* size $55". sell for Phone Kensington 114-F-12.
    [Show full text]
  • Striking Tools
    STRIKING TOOLS Bahco has over 125 years’ experience of forging, and a solid reputation as a high-quality tool manufacturer. Bahco axes, mauls, hammers, cold chisels and punches all meet the high standards that are essential requirements for all applications - where quality, safety, durability and ease of use are key factors. Safety first. In this chapter we also highlight the safety rules that should be followed by the users of our striking tools. 1078 Chapter Index WOODWORKING AND CONSTRUCTION HAMMERS 1082-1084 METAL WORKING AND INDUSTRIAL HAMMERS 1084-1086 INSTRUMENT AND WORKSHOP HAMMERS 1086-1090 AXES, MAULS AND WEDGES 1091-1097 COLD CHISELS 1098-1101 PUNCHES 1102-1108 SETS 1108 WRECKING BARS 1109 MASONS’S PIN 1109 1079 ICON INDEX ▪ Camping axes are lightweight axes with a short ▪ Mauls are heavy sledge hammers that can be handle, making them easy to carry around. Also used to drive poles into the ground or splitting suitable for indoor use e.g. as a kitchen axe wedges into logs ▪ Head weight: 0.6 kg /1 1/4 lb to 1 kg/2 1/4 lb ▪ Head weight: 3 kg/6 ½ lb to 4 kg/8 3/4 lb Camping ▪ Length: 36-50 cm/ 14 1/4” - 19 3/4” Splitting ▪ Length: 90 cm/35 ½” with wedges ▪ Splitting axes have a thick head, specially made ▪ Hatchets are longer axes for trimming trees and for splitting wood. The shape of the head helps other general purpose work to penetrate the wood with little effort. Some are ▪ Head weight: 1 kg/2 1/4 lb made with a longer head back, for use with a ▪ Length: 60-70 cm/23 ½”-27 ½” Splitting splitting wedge Trimming ▪ Head weight: 2 kg/4 ½ lb to 3.5 kg/7 3/4 lb branches ▪ Length: 80-90 cm/31 ½”-35 ½” and felling ▪ Felling axes are heavier, with long handles and a thinner edge, for easy cutting when felling trees ▪ Head weight: 1.1 kg/ 2 ½ lb to 2.3 kg/5 lb ▪ Length: 70-90 cm/ 27 ½” - 35 ½” Felling AXES, MAULS AND WEDGES All axes are supplied with either a leather or rubber edge protector to ensure that the finish of the blade is maintained.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • PLUMBING DICTIONARY Sixth Edition
    as to produce smooth threads. 2. An oil or oily preparation used as a cutting fluid espe cially a water-soluble oil (such as a mineral oil containing- a fatty oil) Cut Grooving (cut groov-ing) the process of machining away material, providing a groove into a pipe to allow for a mechani cal coupling to be installed.This process was invented by Victau - lic Corp. in 1925. Cut Grooving is designed for stanard weight- ceives or heavier wall thickness pipe. tetrafluoroethylene (tet-ra-- theseveral lower variouslyterminal, whichshaped re or decalescensecryolite (de-ca-les-cen- ming and flood consisting(cry-o-lite) of sodium-alumi earthfluo-ro-eth-yl-ene) by alternately dam a colorless, thegrooved vapors tools. from 4. anonpressure tool used by se) a decrease in temperaturea mineral nonflammable gas used in mak- metalworkers to shape material thatnum occurs fluoride. while Usedheating for soldermet- ing a stream. See STANK. or the pressure sterilizers, and - spannering heat resistantwrench and(span-ner acid re - conductsto a desired the form vapors. 5. a tooldirectly used al ingthrough copper a rangeand inalloys which when a mixed with phosphoric acid.- wrench)sistant plastics 1. one ofsuch various as teflon. tools to setthe theouter teeth air. of Sometimesaatmosphere circular or exhaust vent. See change in a structure occurs. Also used for soldering alumi forAbbr. tightening, T.F.E. or loosening,chiefly Brit.: orcalled band vapor, saw. steam,6. a tool used to degree of hazard (de-gree stench trap (stench trap) num bronze when mixed with nutsthermal and bolts.expansion 2. (water) straightenLOCAL VENT.
    [Show full text]
  • 2016 Affinity Tool Works Dealer Price Book Rev 20 Xlsx
    2016 PRODUCT CATALOG Prices Effective January 1, 2016 Supersedes all previously dated price lists. No. 20 Prices subject to change without notice. Affinity Tool Works, LLC • 1161 Rankin • Troy, Michigan 48083 Ph(248) 588-0395 • Fax(248) 588-0623 • [email protected] • www.affinitytool.com Pkg www.boratool.com Stock No. Description Part No. List Price Qty BORA Clamps & Vises 540445 4.5" Micro Bar Clamp (2-Pack) 6$ 10.91 540606-S 6" Midi Pistol Grip Clamp 6$ 12.64 540606 6" Midi Pistol Grip Clamp (2-Pack) 6$ 23.64 540612-S 12" Midi Pistol Grip Clamp 6$ 15.45 540612 12" Midi Pistol Grip Clamp (2-Pack) 6$ 30.00 540806 6" Pistol Grip Bar Clamp 6$ 19.09 540812 12" Pistol Grip Bar Clamp 6$ 20.91 540818 18" Pistol Grip Bar Clamp 6$ 28.18 540824 24" Pistol Grip Bar Clamp 6$ 30.00 BORA Specialized Clamps & Vises 540520 20 Piece Mini Spring Clamp Set 1$ 10.00 551025 Corner Clamp 6$ 30.00 551027 Large Vise 6$ 30.00 BORA Angle Master Miter Duplicator for Mitersaws 530301 Angle Master - Miter Duplicator 3$ 65.45 BORA Sharpening Stones 501057 Sharpening Stone-Aluminum Oxide 6" x 2" x 1" 30$ 4.47 501098 Sharpening Stone-Green Silicon Oxide 6" x 2" x 1" 30$ 8.73 501060 Sharpening Stone-Aluminum Oxide 8" x 2" x 1" 30 $ 8.90 Page 2 © 2016 Affinity Tool Works, LLC Pkg Stock No. Description List Price Qty BORA Modular Clamp Edge & Accessories 543100 100" WTX Clamp Edge (50" + 50") 6$ 99.00 543050 50" WTX Clamp Edge 6$ 53.00 543036 36" WTX Clamp Edge 6$ 46.00 543024 24" WTX Clamp Edge 6$ 40.00 Kits: 543300 3 pc Clamp Edge Set, 24, 36, 50" 4$ 134.00 543400
    [Show full text]
  • MASTER CATALOG Tools for the Remodeling, Restoration and Building Trades
    HydeCatalog 9/7/07 11:14 AM Page 1 MASTER CATALOG Tools for the Remodeling, Restoration and Building Trades For a better finish, start with HYDE™. HydeCatalog 9/7/07 11:14 AM Page 2 by memorable merchandising product strength and durability Serious and advertising directly to are often backed by a lifetime Tools for your customers. guarantee. America’s Favorite Brand Tap into the loyal following PAINT & SURFACE PREP 5 Serious Our brand strength has never Hyde Tools has been building for Spray Tools, Paint Shields, Scrapers, Putty been stronger in paint and wall- generations. Stock HYDE® brand Knives, Multi-use Tools, Cleaning Brushes Sales covering hand tools. HYDE® is tools and you can be sure your REPAIR 35 America’s favorite brand in these customers will come back RePairs™ Value Packs, Wall Repair Tools, Caulk categories, chosen two to one by frequently and buy often. Repair Tools, Glass Repair Tools Growth contractors over any other brand DRYWALL 45 HYDE® is the brand of choice for for scraping, patching, taping Are You Serious About ® Joint Knives, Taping Knives, Corner Tools, retailers and wholesalers who and coating surfaces. Whether Sales? Get HYDE Pointing Knives, Hawks, Mixers, Mud Pans, are serious about growing sales. purchased by professionals or Call our customer service Saws, Joint Tape Our high-quality tools are com- homeowners, our tools are department at 800-USA-HYDE MASONRY & CONCRETE 67 petitively priced and supported considered “serious tools for (872-4933) or 508-764-4344 Concrete, Cement and Brick Tools: Trowels, serious users.” Our superior for details. Pointers, Edgers, Groovers, Floats WALLCOVERING 75 Scoring Tool, Shavers, Scrapers, Shears, Brushes, Guides, Smoothing Tools, Rollers Every label bears the distinctive HYDE® branding.
    [Show full text]
  • Measuring & Marking Tools
    Measuring & Marking Tools Dividers & Callipers • Dividers are instruments that can be used to transfer measurements directly from a rule, to measure distances on a map, or to scribe an arc or a circle. • Wing dividers feature a curved steel bar to separate the legs, while the distance is set with a lock nut. • Callipers (inside or outside) work in the same way, but are designed for measurement, rather than marking. 3170 3170-SS 3175-SS STRAIGHT EDGE STAINLESS STEEL STRAIGHT EDGE S/STEEL STRAIGHT EDGE IN WOODEN CASE • Manufactured from carbon steel • Stainless steel • Stainless steel • Made with one squared edge and one bevelled edge • Finely polished • Finely polished • Comes in graduated (mm) or plain without graduation • Made with one squared edge and one bevelled edge • Square on both edges • Sizes up to 2000 mm are chromated, 3000 mm lengths • Comes in graduated (mm) or plain with no graduation • Permanently etched graduations are finely polished • Removable positioning/carrying knob/s • Includes calibration certificate • Comes in wooden case • In accordance to DIN 866/1 standards (tolerance - 0.04 mm/m) Hang Display (t((tolerancetoololeolerllelereerraancanceanncennccece --0 00.04.04.0.0404 mm/mmmmm/mmm/m)m/mmm//m/m) Removable positioning/carrying knob/s NOTE: Supplied with cat.-no. length (mm) section (mm) knobs Calibration certificate. (Tolerance - 0.04 mm/m) Graduated (mm) 3170-M-SS-500 500 40 x 3 1 cat.-no. length (mm) section (mm) 3170-M-SS-1000 1000 50 x 4 2 3175-SS-A-500 500 30 x 6 3170-M-SS-1500 1500 50 x 4 2 3175-SS-A-1000 1000 40 x 8 3170-M-SS-2000 2000 50 x 4 2 Plain, no graduation 1511 3170-P-SS-500 500 40 x 3 1 3170-P-SS-1000 1000 50 x 4 2 WING DIVIDER 3170-P-SS-1500 1500 50 x 4 2 • High quality forged steel • Heavy rivet and box joint mechanism Hang 3170-P-SS-2000 2000 50 x 4 2 • All polished Display cat.-no.
    [Show full text]
  • 2020 Career Development Event Rules and Regulations Regulations
    2020 Career Development Event Rules and Regulations Regulations Agricultural Technology and Mechanical Systems Maximum Number of Team Members 4 Number of Team Members Scored 4 Scantron Ag Sales/Fb Mgmt./Ag Mech – CDE# 105481 Committee: Tim Kidwell Wendy Knopp Seth Neal 2020 West Virginia Agriculture Mechanics CDE The 2020 agricultural mechanics contest at the State Agriculture Career Development As voted by teachers of WV events will be modeled closely on the National FFA ATMS CDE. For more information about national CDE: http://faculty.missouri.edu/~schumacherl/natcon.html The yearly suggestions for emphasis are recommendations made by WV teachers at the summer meeting of the ATMS group at State FFA Convention. These will be revisited every year for conformation. MORNING SESSION- 2020 Events –This will be a written test for qualification to the afternoon hands-on section. Students will need a non-programmable calculator. No cell phones will be allowed in the contest. Anyone found using a cell phone at any time during the contest will be removed and scored at a 0 for all portions. Written Test The participant will complete a 25 question multiple choice test that 45 min focuses on questions from each systems area of the event. The exam has a heavy math focus. Students will need a non-programmable calculator. Compact equipment systems The participant will complete a 25 question multiple choice test that 45 min focuses on compact equipment. Compact equipment is defined as Identification of parts and tools being 30 horsepower or less. Interpreting horsepower, torque and will be contained in this system other power measurement criteria.
    [Show full text]
  • Scotvec-Scottish Vocational Education Council
    -SQA-SCOTTISH QUALIFICATIONS AUTHORITY Hanover House 24 Douglas Street GLASGOW G2 7NQ NATIONAL CERTIFICATE MODULE DESCRIPTOR -Module Number- 0085301 -Session-1988-89 -Superclass- WK -Title- CARPENTRY AND JOINERY: WORKSHOP PRACTICE 1 (x 1½) -DESCRIPTION- Purpose This module is designed to introduce a student following a career in carpentry and joinery and receiving complementary industrial training to the knowledge and skills required for everyday use of handtools in the workshop. Preferred No formal entry requirements Entry Level Learning The student should: Outcomes 1. know the practical applications of a range of woodworking tools and equipment; 2. know the practical applications of a range of timber joints; 3. know the use of a range of ironmongery/hardware; 4. demonstrate tool skills in the manufacture of timber joints and components. Content/ Safety regulations and safe working practices and Context procedures should be observed at all times. The following should be read in conjunction with objectives set out in the New Training Initiative recommendations for Carpenters and Joiners. Continuation of Module No. 85301 Session 1988-89 Corresponding to the Learning Outcomes 1-4: 1. Range of woodworking tools: (a) saws: rip saw; cross cut saw; panel saw; tenon saw; dovetail saw; compass saw; pad saw; bow saw; coping saw. (b) planes: smoothing plane; jack plane; try plane; block plane; bullnose plane; shoulder plane; rebate plane; bench rebate plane; side rebate plane; plough plane; compass plane; universal multi-plane; router; spokeshave.
    [Show full text]
  • HYDE® Master Catalog Do It the Hard Way, Or the HYDE® Way
    HYDE® Master Catalog Do it the hard way, or the HYDE® way. Get the job done with one tool, not 14, with a HYDE® 14-in-1 Multi-tool. Scrapes, patches, pulls, opens, closes, screws and unscrews just about anything on your to-do list. Tool #06993 hydetools.com • 800-872-4933 Merchandiser #06989 HYDEDo TOOLS it the HYDE® way at hydetools.com Surface Preparation Putty knives, scrapers and multi-tools, pp.4-9. Paint scrapers, 4 pp.10-12. Sanding tools, p.13. Wire brushes, pp.14-16. Stay up to date Glass tools and scrapers, pp.16-17. with HYDE® Pressure Washing 18 Pivoting wands for use with gas and electric pressure washers, p.18 Painting & Airless Spraying Spray guns and poles, pp.20-21. Paint shields, pp.21-22. 20 Specialty rollers and roller grids, pp.22. Mixers & multi-tools, p.23. Paint accessories, pp.24-25. Wall Repair Wall patches and patching tools, p.26. Drywall clips, p.27. 26 Sanding tools, p.27. On the Web Drywall Your catalog will always be up-to-date 28 Taping knives, pp.28-29. Finishing trowels, pp.29-30. when you use our digital catalog at Joint knives, pp.30-31. Corner tools, p.32. Drywall hawks, p.32. hydetools.com. Also check our website Joint tape and tapers, pp.32-33. Mud pans, p.33. Texture and knockdown tools, p.34. Drywall saws, cutting tools for the latest tool news, a handy project and T-squares, p.34. Drywall accessories, pp.34-35. calculator, job specs and how-to tips.
    [Show full text]
  • Jack London the Mutiny of the « Elsinore »
    JACK LONDON THE MUTINY OF THE « ELSINORE » 2008 – All rights reserved Non commercial use permitted THE MUTINY OF THE ELSINORE by Jack London CHAPTER I From the first the voyage was going wrong. Routed out of my hotel on a bitter March morning, I had crossed Baltimore and reached the pier- end precisely on time. At nine o'clock the tug was to have taken me down the bay and put me on board the Elsinore, and with growing irritation I sat frozen inside my taxicab and waited. On the seat, outside, the driver and Wada sat hunched in a temperature perhaps half a degree colder than mine. And there was no tug. Possum, the fox-terrier puppy Galbraith had so inconsiderately foisted upon me, whimpered and shivered on my lap inside my greatcoat and under the fur robe. But he would not settle down. Continually he whimpered and clawed and struggled to get out. And, once out and bitten by the cold, with equal insistence he whimpered and clawed to get back. His unceasing plaint and movement was anything but sedative to my jangled nerves. In the first place I was uninterested in the brute. He meant nothing to me. I did not know him. Time and again, as I drearily waited, I was on the verge of giving him to the driver. Once, when two little girls--evidently the wharfinger's daughters-- went by, my hand reached out to the door to open it so that I might call to them and present them with the puling little wretch.
    [Show full text]
  • Tool Identification Guide
    Subject: ______________________ Name: _______________________ Section: ____ Period: ____ Date: __________________, 201__ TOOL IDENTIFICATION GUIDE Production: Jenny Liang 2015, Kivanc Yildiz 2010 Drawings: Ruby Qu, Ann Ke, Judy Liu & Karina Wu 2013 Chantal Lo 2010, Isadora Kostic 2012 First published 2010 Revised & Expanded 2012, 2015 Electronics & Robotics Sir Winston Churchill Secondary Vancouver, British Columbia, Canada 06.16.2015 Why and How A knowledge of tool and instrument names will enhance your success in electronics and improve your life. Although tool identification quizzes were standard fifty years ago in all technical studies subjects, today they have been largely abandoned. Mastering this information is fun and fulfilling. In a secondary school such as ours, where the large majority speak English as a second language, this unit is especially valuable. Our guide groups tools by use: bending, clamping, cutting… The drawings appear alphabetically since students report that this approach aids memorization. A practice quiz booklet accompanies the guide. Names are replaced by blank lines. Students prepare for the quiz by testing themselves. During the actual quiz the tools and instruments are held aloft and shown randomly. Simultaneously, the teacher records the answer on an overhead projector transparency. Students mark each others quiz. Background This booklet first appeared in 2010 and underwent extensive revision and expansion in 2015. Six student artists generously contributed drawings. Thirty-nine drawings by Ruby Qu are included. Chantal Lo made a substantial contribution. Ann Ke, Judy Liu and Karina Wu also contributed. A separate electronic file of Ruby Qu’s full size drawings in 8.5 inch by 11 inch format is available at www.swcelectronics.com.
    [Show full text]