Prusaprinters

Barney Rubble

3D MODEL ONLY reddadsteve

VIEW IN BROWSER

updated 28. 8. 2020 | published 28. 8. 2020

Summary

Barney Rubble, from the Flintstones cartoon show by Hanna-Barbera.

The Flintstones cartoon takes place in a romanticized Stone Age setting, depicting the lives of the Flintstone family and their best friends and neighbors the Rubbles.

Barney was modeled in proportion to my other Flintstone models.

No supports are required. If you have the proper flament colors, no painting is needed.

The model is 240mm tall.

Enjoy, and I hope you have a "Yaba Daba Do" time printing this!

Toys & Games > Action Figures & Statues

fintstones comics cartoon

Print Settings

Printer: FlashForge Creator X Rafts: Doesn't Matter Supports: No Resolution: .2mm Infll: 10%

Notes: See below for some helpful printing and assembly instructions Building the model

Colors (there are no multiple printed pieces)

Black: eyes eyebrow_right eyebrow_left mouth laces .. Skin or Beige: head nose arm_left arm_right feet .. Yellow: hair_front hair_back .. Brown: body_top body_bottom .. Gold or Light Brown: face .. Pink: tongue .. Any color (hidden pieces): pins

Printing and assembly tips

1-Be sure to clean any frst layer squish if you have any problem joining parts. The parts should ft nicely when printed cleanly.

2-I did not require any rafts or brims for any of the parts. .. Assembly tips: 1-The hair does not require any pins for attaching to the head. The hair fts easily to the head shape, just be sure to glue and attach both of the hair pieces at the same time to the head to for full alignment. .. 2-Refer to the assembly diagram for putting the model together. The model is meant to be glued.

Model Files (.stl, .3mf, .obj, .amf)  DOWNLOAD ALL FILES

hair_back.stl 215.7 KB  updated 11. 8. 2020

tongue.stl 16.6 KB  updated 11. 8. 2020

body_bottom.stl 289.8 KB  updated 11. 8. 2020

eyebrow_left.stl 12.2 KB  updated 11. 8. 2020

head.stl 330.9 KB  updated 11. 8. 2020

arm_left.stl 90.6 KB  updated 11. 8. 2020

mouth.stl 104.6 KB  updated 11. 8. 2020 nose.stl 51.3 KB  updated 11. 8. 2020

face.stl 255.4 KB  updated 11. 8. 2020

feet.stl 1.3 MB  updated 11. 8. 2020

eyebrow_right.stl 12.2 KB  updated 11. 8. 2020

pins.stl 5.9 KB  updated 11. 8. 2020

arm_right.stl 90.6 KB  updated 11. 8. 2020

hair_front.stl 326.3 KB  updated 11. 8. 2020

laces.stl 150.1 KB  updated 11. 8. 2020

eyes.stl 84.9 KB  updated 11. 8. 2020 body_top.stl 458.6 KB  updated 11. 8. 2020

The Author has not uploaded any print fles.  Try to search in User print fles section or generate and upload your own.

License 

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike