Barney Rubble 3D MODEL ONLY reddadsteve VIEW IN BROWSER updated 28. 8. 2020 | published 28. 8. 2020 Summary Barney Rubble, from the Flintstones cartoon show by Hanna-Barbera. The Flintstones cartoon takes place in a romanticized Stone Age setting, depicting the lives of the Flintstone family and their best friends and neighbors the Rubbles. Barney was modeled in proportion to my other Flintstone models. No supports are required. If you have the proper filament colors, no painting is needed. The model is 240mm tall. Enjoy, and I hope you have a "Yaba Daba Do" time printing this! Toys & Games > Action Figures & Statues flintstones comics cartoon Print Settings Printer: FlashForge Creator X Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 10% Notes: See below for some helpful printing and assembly instructions Building the model Colors (there are no multiple printed pieces) Black: eyes eyebrow_right eyebrow_left mouth laces .. Skin or Beige: head nose arm_left arm_right feet .. Yellow: hair_front hair_back .. Brown: body_top body_bottom .. Gold or Light Brown: face .. Pink: tongue .. Any color (hidden pieces): pins Printing and assembly tips 1-Be sure to clean any first layer squish if you have any problem joining parts. The parts should fit nicely when printed cleanly. 2-I did not require any rafts or brims for any of the parts. .. Assembly tips: 1-The hair does not require any pins for attaching to the head. The hair fits easily to the head shape, just be sure to glue and attach both of the hair pieces at the same time to the head to for full alignment. .. 2-Refer to the assembly diagram for putting the model together. The model is meant to be glued. Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES hair_back.stl 215.7 KB updated 11. 8. 2020 tongue.stl 16.6 KB updated 11. 8. 2020 body_bottom.stl 289.8 KB updated 11. 8. 2020 eyebrow_left.stl 12.2 KB updated 11. 8. 2020 head.stl 330.9 KB updated 11. 8. 2020 arm_left.stl 90.6 KB updated 11. 8. 2020 mouth.stl 104.6 KB updated 11. 8. 2020 nose.stl 51.3 KB updated 11. 8. 2020 face.stl 255.4 KB updated 11. 8. 2020 feet.stl 1.3 MB updated 11. 8. 2020 eyebrow_right.stl 12.2 KB updated 11. 8. 2020 pins.stl 5.9 KB updated 11. 8. 2020 arm_right.stl 90.6 KB updated 11. 8. 2020 hair_front.stl 326.3 KB updated 11. 8. 2020 laces.stl 150.1 KB updated 11. 8. 2020 eyes.stl 84.9 KB updated 11. 8. 2020 body_top.stl 458.6 KB updated 11. 8. 2020 The Author has not uploaded any print files. Try to search in User print files section or generate and upload your own. License This work is licensed under a Creative Commons (4.0 International License) Attribution—Noncommercial—Share Alike ✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition .