DOCSLIB.ORG

Ridgemaster® / Ridgemaster® Plus / Hipmaster®

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

Boral Roofing Build something great™ RidgeMaster ® / RidgeMaster ® Plus / HipMaster ® THE INDUSTRY’S MOST ADVANCED, DURABLE RIDGE AND HIP VENTILATION SYSTEM Part of the Boral™ Cool Roof System Crushproof. Bugproof. Weatherproof. All the Proof you Need. • Efficient ventilation regardless of wind direction or speed. • Blocks out nasty weather, pesky bugs. • Sturdy, no-dent construction shrugs off falling tree branches, hammer strikes. • Accommodates fiberglass and organic shingles, composite tiles, wood, slate or metal systems; residential or commercial; new construction or reroofing. • Meets or exceeds all major building code standards. • Easy, smooth installation with nailing and shingle alignment guides. High-level Performance, Low-profile Package Shingles over completely with no exposed baffles or fins to detract from the beauty of your roofline. No Matter the Weather Proven to withstand wind-driven rain in excess of 8 inches per hour with no leaking. (Best results are obtained by using ridge vents in conjunction with equal or greater soffit ventilation. “Wind-driven rain test” conducted by Construction Research Laboratories, Dade County, FL. Dade County Approval No. 92-0424.2) VENTILATION SYSTEMS HAVE NEVER LOOKED OR WORKED BETTER RidgeMaster ® HipMaster ® RidgeMaster ® Plus RidgeMaster works by natural HipMaster provides necessary RidgeMaster Plus offers the same convection, without external baffles or ventilation for hip roofs and interlocks features as Ridgemaster but includes fins, to provide a uniformly cool attic with RidgeMaster Plus to blend a self-sealing end. It also comes to space prolonging roof life and beautifully into rooflines. a natural peak and will interlock with increasing comfort. HipMaster. All dimensions in inches All dimensions in inches All dimensions in inches • Accommodates all roof pitches from 3/12 • The only venting system designed specifically • For all roof pitches from 3/12 to 12/12. to 16/12. Comes in 4ft. lengths. for hard to ventilate hip roofs. • Patented added pitch shows more • Patented internal baffle system prevents • Pat. pend. triple baffle system engineered to shingle profile and less vent opening. Blends bugs, blowing snow and rain from entering. keep blowing rain and snow from entering. perfectly into roof lines. Comes in 4ft. lengths. • Shingles over completely to blend perfectly • For all roof pitches from 3/12 to 12/12. Can with your roof. be joined with RidgeMaster Plus to blend into • Patented internal baffle system prevents a uniform roof line. bugs, blowing snow and rain from entering. • Easily adapts to a Peak, Flash, or Fascia Vent. • Easily adapts to a Peak Vent or Flash Vent. PEAK VENT Only HipMaster Has a Patented ® Triple Baffle RidgeMaster Plus 9” System! ® Patented HipMaster 9” Hip Baffle • For 9" hip and ridge. • Same features as RidgeMaster Plus and HipMaster. Comes in 4ft. lengths. RidgeMaster Plus 9" FLASH, SHED, OR BASE VENT HipMaster Starter HipMaster 9" Blends regular or 9" HipMaster into roofline at bottom or top of hip. U.S. Pat. Nos. 4,924,761, 5,009,149 • 5,060,431, 5,174,076 • 5,458,538. Other U.S. & Foreign Pats. Pend. 2 Part of the Boral™ Cool Roof System RidgeMaster® Plus – The difference: everything you don’t see. Water and snow locked out. Patented computer designed The strongest “internal baffle system” rolls back ridge vent in the rain, wind and snow. industry. Resists dents Durable copolymer. Resists from tree branches or cracking regardless of hammer blows. temperature. 40 year limited warranty. Ultrasonically sealed blowing snow and bug Rugged crush proof barrier. Cannot clog with construction. With leaves, pine needles, etc. nailing supports and structural ribs designed Self-aligning, interlocking to ensure a smooth and ends. This patented feature straight roofline helps provide quick align- . ment and ensures that no weather or insects can enter between Built-in end caps. Improves venting units. weather resistance, simplifies Vents the entire installation and adjusts to roof peak continuously pitch. and effectively. Works Ship-lap design. Allows for by natural convection to siphon expansion and contraction during moist, hot air out of attic spaces. temperature extremes. Needs no exposed baffles or fins to U.S. Pat. Nos. 4,924,761, 5,009,149, 5,060,431, 5,174,076. work which can deteriorate and Other U.S. & Foreign Pats. Pending detract from appearance. CapMaster ® – Beautifies Stack Vents • Simultaneously protects and beautifies, ending stack vent leaks forever. • Four colors to complement any roof. • Dual-wall construction slips in and over roof vent pipes ensuring that water is directed down drain or onto sealed shingles. Ready to use with pipes between 3" and 4" in diameter. For pipes outside of these dimensions please contact Inspire by Boral at 800.971.4148. • Adapts to all roof pitches from 3/12 to 12/12. Only tools needed are snips or scissors to follow imprinted pattern for 4 13/16" any pitch. 2 9/16" • No need to caulk. Friction clips hold CapMaster in place. 9 3/4" 18 7/16" 13" Û 2 7/8" Dark Grey Light Grey Black Brown Inspire by Boral roofing product shown with CapMaster and RidgeMaster Plus. Choose from four colors. Friction clips hold CapMaster in place. No need to caulk. 3 www.BoralRoof.com Metal Installation on Wood Shingle Inspire® by Boral® composite slate. METAL ROOFING COMPOSITE/SLATE ROOFING D-Rib Standing Seam Ridge Cap Metal Cap ® Metal Cap Fastener RidgeMaster Plus HipMaster ® HipMaster ® Sheet Metal Sheet Metal Fastener Fastener 1" Air Opening Sealant Tape “Z” Flashing D-Rib Metal Nailer Closure Nailer 1/2” Air 1/2” Air Opening Opening D-Rib Standing Panel Seam Panel Underlay Underlay Slates Underlay Substrate Substrate Substrate RIDGE POLE TRUSS CONSTRUCTION CONSTRUCTION For use with D-Rib or Standing Seam roofs. For use with standard and textural slates. Adapts to ridge pole or truss. Adapts to ridge pole or truss. WOOD SHINGLE ROOFING FASCIA VENTING Severe Weather Service Normal Weather Service Ridge Cap HipMaster ® Metal Cap Fastener Shingles 1" Air Fasteners Opening Ice & Water 1" Air Underlay Shield Opening Ice & Water Shield Drip Edge “Z” Flashing Shingles Fascia Top Plate Metal Cap Nailer Fastener Note: Cut RidgeMaster in half lengthwise along center seam Underlay Fascia Trim and install end to end over fascia Substrate slot with cut end facing up. RidgeMaster ® TRUSS CONSTRUCTION Can be used with Blue and Red label No.1 and No.2 Great for homes with no soffit overhang. Fivex-Perfections-Royal shingles. Adapts to ridge pole or truss For new construction or retrofit. construction. Diagrams above are intended as a general overview only. More extensive installation instructions are available for these applications and others from Mid-America. Download a QR Code reader app for your smartphone, then take a photo to visit our website www.BoralRoof.com 1 800.971.4148 | BoralRoof.com © 2018 Boral Roofing LLC AC672-7/18.
Recommended publications
  • BUILDING CONSTRUCTION NOTES.Pdf

    BUILDING CONSTRUCTION NOTES.Pdf

    10/21/2014 BUILDING CONSTRUCTION RIO HONDO TRUCK ACADEMY Why do firefighters need to know about Building Construction???? We must understand Building Construction to help us understand the behavior of buildings under fire conditions. Having a fundamental knowledge of buildings is an essential component of the decisiondecision--makingmaking process in successful fireground operations. We have to realize that newer construction methods are not in harmony with fire suppression operations. According to NFPA 1001: Standard for FireFighter Professional Qualifications Firefighter 1 Level ––BasicBasic Construction of doors, windows, and walls and the operation of doors, windows, and locks ––IndicatorsIndicators of potential collapse or roof failure ––EffectsEffects of construction type and elapsed time under fire conditions on structural integrity 1 10/21/2014 NFPA 1001 Firefighter 2 Level ––DangerousDangerous building conditions created by fire and suppression activities ––IndicatorsIndicators of building collapse ––EffectsEffects of fire and suppression activities on wood, masonry, cast iron, steel, reinforced concrete, gypsum wallboard, glass and plaster on lath Money, Money, Money….. Everything comes down to MONEY, including building construction. As John Mittendorf says “ Although certain types of building construction are currently popular with architects, modern practices will be inevitably be replaced by newer, more efficient, more costcost--effectiveeffective methods ”” Considerations include: ––CostCost of Labor ––EquipmentEquipment
  • Truss-Facts-Book.Pdf

    Truss-Facts-Book.Pdf

    TRUSS FACTS BOOK CONTENTS WHAT IS A TRUSS? 2 THE EVOLUTION OF TRUSSES 3 THE UNIVERSAL TRUSS PLATE 5 TRUSS TERMS 6 TRUSS NUMBERING SYSTEM 8 TRUSS SHAPES 9 TRUSS SYSTEMS 12 GABLE END 12 HIP 12 DUTCH HIP 14 GIRDER AND SADDLE 15 SPECIAL TRUSS SYSTEMS 16 CANTILEVER 17 TRUSS DESIGN 18 TRUSS ANALYSIS 18 TRUSS LOADING COMBINATION & LOAD DURATION 18 LOAD DURATION 18 DESIGN OF TRUSS MEMBERS 18 WEBS 18 CHORDS 19 MODIFICATION FACTORS USED IN DESIGN 19 STANDARD & COMPLEX DESIGN 19 BASIC TRUSS MECHANICS 20 TENSION 20 COMPRESSION 20 BENDING 20 DEFLECTION 21 TRUSS ACTION 21 DESIGN LOADS 22 LIVE LOADS 22 WIND LOAD 23 TERRAIN CATEGORIES 24 SEISMIC LOADS 24 TRUSS HANDLING AND ERECTION 25 MULTINAIL CONNECTOR PLATES 26 MULTI GRIPS 26 TRIPLE GRIPS 26 EASY FIX GIRDER BRACKETS 26 INTERNAL WALL BRACKETS 26 TRUSS BOOTS 26 ANTI TWIST TRUSS BOOTS 26 PURLIN STRAPS 27 CYCLONE TIES 27 JOIST HANGERS 27 STUD TIES 27 STRAP NAILS 27 FLAT TENSION BRACING 27 STEELWOOD JOISTS 28 MULTISTRUT JOISTS 29 © MULTINAIL 1 TRUSS FACTS BOOK WHAT IS A TRUSS? A ‘truss’ is formed when structural members are joined together in triangular configurations. The truss is one of the basic types of structural frames formed from structural members. A truss consists of a group of ties and struts designed and connected to form a structure which acts as a large span beam. The members usually form one or more triangles in a single plane and are arranged so that the external loads are applied at the joints and theoretically cause only axial tension or axial compression in the members.
  • Roof and Gutter De-Icing Cable

    Roof and Gutter De-Icing Cable

    ROOF AND GUTTER DE-ICING CABLE Design and Installation Guide Industrial Residential CommeWhat are Ice Dams? How Ice Dams are formed 1 Rising heat from the house melts the blanket of snow and ice on the roof from the bottom up, sending water trickling down the roof. 2 When water arrives at the cold eaves, it refreezes and forms a dam, preventing drainage. 3 Water is trapped behind the dam and backs up under the shingles. 4 The melted water can leak into the house through the windows or ceiling Snowmelt Principles and Application: Electrical Heat Trace Cable is intended to provide drain paths for the melted or flowing water to be carried away from the roof, gutters, and down spouts. This system is not intended to provide a snow free surface. Roofs in General Sun and building heat combine to melt accumulated snow at the roof/snow interface. Snow is porous and allows water to flow. Ice is not porous and will trap water. Water will flow as long as the roof surface stays above freezing. When the water runs to the roof edge it freezes, starting an “ice dam” that continues to grow and trap more water, leading to leakage problems. The objective of a snowmelt system is to ensure the water is drained off and not allowed to freeze at the roof edge forming a dam. Gutter Damage from Ice The water that enters into your rain gutters can freeze and build up an enormous amount of weight many times causing water to leak into soffits and entering into the building.
  • Gutter System Installation Standards Product Specification

    Gutter System Installation Standards Product Specification

    Gutter System Installation Standards Product Specification Property of: Spectra Metal Sales Gutters and Leaf Protection Introduction A Rain Gutter System starts with a trough, called a gutter, which collects rainwater from the roofline of a house and diverts it away from the structure, using elbows and downspouts. • The purpose of this diversion is to prevent water flow off the roof edge which can cause structural damage over time to the walls and/or foundation of a house. • The gutter system is more important to the exterior of your home than the actual paint, siding, or even windows, because it protects your home from rot, mold, mildew, and flooding. • This water damage, without a gutter system, occurs slowly, spreads quickly, and is unnoticeable until the damage repair is substantial. • For your gutter system to work properly, it must be able to empty out the water faster than it fills up. In order to ensure the proper flow of water, a few are vital to the success of the overall gutter system: 1) Seamless gutters 2) Gutter and downspout sizing 3) Slope or pitch of gutter 4) Downspout placement 5) Keeping the gutters debris free 6) Using quality parts and accessories 2 Gutter Specifications Scope of Guide A) The Rain-carrying system consists of all necessary components to complete installation with products manufactured or endorsed for use by Spectra Metal Sales. System Components A) Gutters shall be made of 3105-H24 aluminum and shall be continuous and seamless with a minimum thickness gauge of .032” or .027” (+/- .002” nominal). B) All pre-painted components will have an approved SMS Finish and Color.
  • Draft Mansard Roof Guidance 201115

    Draft Mansard Roof Guidance 201115

    London Borough of Tower Hamlets DRAFT MANSARD ROOF GUIDANCE NOTE Draft for consultation November 2015 0 Draft Mansard Roof Guidance Purpose of this consultation The purpose of the Mansard Roof Guidance Note is to support residents who would like to make a planning application for a new mansard roof in one of the Borough’s Conservation Areas. The Draft Mansard Roof Guidance Note contains information on the most relevant planning policies that the Council must consider when making decision on planning applications; the character of historic roofs in Tower Hamlets; the elements of Mansard Roofs and best practice advice on how you should approach the design of a new mansard roof in a conservation area; and finally, the document includes some helpful tips for you to refer to when making a planning application for a new mansard roof in a Conservation Area. In order to assist residents with planning application process, officers have also examined the following eight Conservation Areas in more detail to identify the best opportunities for properties to extend: Driffield Road; Medway; Fairfield Road; Victoria Park; Jesus Hospital Estate; York Square; Chapel House; and Tredegar Square. Officer recommendations have been presented in draft addendum to the relevant Conservation Area Character Appraisals. These addendums are also subject to consultation from 23 November 2015 and 18 January 2016. More information on these can be found via the links and contact details below. How you can get involved It is important that this Guidance Note is easy to understand and useful. If you feel that this document could be improved and the information better communicated, we would be grateful for your feedback during the public consultation.
  • Technical Bulletin No.7 Roofline Installation Details

    Technical Bulletin No.7 Roofline Installation Details

    technical bulletin No.7 Roofline Installation Details This technical bulletin is intended to provide you with a brief overview of the popular products in Kestrel’s Roofline range, where they can be used and the main criteria for installation. Typical Eaves Details K16 Fascia & 9mm Vented Soffit Eaves Protector Fascia Installation Details Pre-Installation Considerations Preparation: • All access and works to comply with current and relevant Health & Safety and Construction Design Management Regulation recommendations. Stainless Steel Polytop Fixings 2 x 65mm @ 600mm Centres • Clear work area in-line with best practice before starting work, ensuring safe scaffolding access is available. 803 Vented Soffit Stainless Steel Polytop Fixings 10mm Air gap 1 x 40mm @ 600mm Centres • Remove first row of roof tiles where necessary. • Remove all existing fascia / soffit materials. K22 Fascia & 9mm Vented Soffit • Replace any un-sound / rotten timber or felt and treat rafter ends with preservative. • Maintain air path for roof ventilation. Eaves Protector Installation considerations Installation considerations are intended to provide you with need- to-know information for the core processes of product installation. They are not intended as an exhaustive installation guide. The information presented will provide you with a valuable resource when assessing how best to use our products in your selected application. Stainless Steel Polytop Fixings 2 x 65mm @ 600mm Centres Fascia 803 Vented Soffit 692 Soffit Channel Fit directly to rafter ends using polytop nails, 2 per fixing centre max 10mm Air gap 600mm centres - 65mm nails. Austenitic stainless steel (Grade A4 KB16 Fascia & 9mn Vented Soffit BS6105). Fascia is capable of load bearing in relation to light weight gutters and the first row of roof tiles (Eaves Tiles).
  • Roof Truss – Fact Book

    Roof Truss – Fact Book

    Truss facts book An introduction to the history design and mechanics of prefabricated timber roof trusses. Table of contents Table of contents What is a truss?. .4 The evolution of trusses. 5 History.... .5 Today…. 6 The universal truss plate. 7 Engineered design. .7 Proven. 7 How it works. 7 Features. .7 Truss terms . 8 Truss numbering system. 10 Truss shapes. 11 Truss systems . .14 Gable end . 14 Hip. 15 Dutch hip. .16 Girder and saddle . 17 Special truss systems. 18 Cantilever. .19 Truss design. .20 Introduction. 20 Truss analysis . 20 Truss loading combination and load duration. .20 Load duration . 20 Design of truss members. .20 Webs. 20 Chords. .21 Modification factors used in design. 21 Standard and complex design. .21 Basic truss mechanics. 22 Introduction. 22 Tension. .22 Bending. 22 Truss action. .23 Deflection. .23 Design loads . 24 Live loads (from AS1170 Part 1) . 24 Top chord live loads. .24 Wind load. .25 Terrain categories . 26 Seismic loads . 26 Truss handling and erection. 27 Truss fact book | 3 What is a truss? What is a truss? A “truss” is formed when structural members are joined together in triangular configurations. The truss is one of the basic types of structural frames formed from structural members. A truss consists of a group of ties and struts designed and connected to form a structure that acts as a large span beam. The members usually form one or more triangles in a single plane and are arranged so the external loads are applied at the joints and therefore theoretically cause only axial tension or axial compression in the members.
  • Conservation Area Loft Conversion

    Conservation Area Loft Conversion

    Conservation area loft conversion The vast majority of loft conversions Econoloft build fall within permitted development, which means they don’t need planning permission. However, there are exceptions and one of these is if your property sits within a conservation area. The statutory definition of a conservation area is, 'an area of special architectural or historic interest, the character of which it is desirable to preserve or enhance.’ While living in such an area offers may benefits, a downside is the restrictions that can be placed on householders who want to develop their home. Econoloft apply for planning permission on your behalf Planning permission essentially means you must have the consent from your local authority before you start building. Every local authority is different when it comes to granting (or not granting permission) which is why, any home within a conservation area or an area of outstanding natural beauty should work with an experienced company like Econoloft. We will do all the paperwork on your behalf and liaise with the relevant personnel to ensure a swift and positive resolution. The Parkington’s live in a conservation area and relied on Econoloft to secure planning for their master bedroom ensuite. They said: “We were fortunate to select Econoloft to carry out the conversion and they demonstrated their expertise from the outset. They really knew their stuff when it came to the planning process. They helped us though the process and thankfully it was relatively simple.” Your Econoloft loft conversion in a conservation area should complement the neighbourhood Planners will be concerned that any alteration to your property does not have a negative impact, not just on your own home, but the street scene and the area overall.
  • Living Tradition Adding to Our Heritage with More Homes and Sustainable Intensification Living Tradition

    Living Tradition Adding to Our Heritage with More Homes and Sustainable Intensification Living Tradition

    Create Streets Briefing Paper August 2021 Samuel Hughes Living tradition Adding to our heritage with more homes and sustainable intensification Living Tradition Foreword by Christopher Boyle QC Former Chairman of the Georgian Group (2015-2020) The mansard is one of the defining features of the Georgian and Victorian skyline. In eighteenth and nineteenth century Britain, the right of property owners to add mansards went without question: the idea that local governments would one day forbid them would have been viewed with puzzlement. The form of mansards was, however, tightly controlled by a series of Building Acts which governed their height, inclines and materials, as well as regulating their parapets, party walls, chimney stacks and dormers. These regulations led to a distinctive British tradition of mansard design, readily distinguished from those of France or Germany. This fascinating report proposes that we allow this great tradition to be revived. On terraces on which some of the buildings have mansards already, owners of the remaining buildings would enjoy a presumption in favour of permission to add new ones, provided that they followed a design guide ensuring that the new mansards conformed to the best traditions of historic mansard design. On terraces on which none of the buildings have mansards yet, residents would be able to vote for the right to add them, with the same proviso. It is profoundly important that we cherish our architectural heritage, a cause on which I worked during my five years as Chairman of the Georgian Group. Cherishing this heritage involves fighting the demolition of historic buildings, just as it involves fighting alterations that would damage their character.
  • ROOFS a Guide to Alterations and Extensions on Domestic Buildings

    ROOFS a Guide to Alterations and Extensions on Domestic Buildings

    PLEASE NOTE The Unitary Development Plan (UDP) policies and planning, building control and other legislation and regulations referred to in the text of this guide were current at the time of publication. Because this guidance is an electronic version of the printed guidance as approved and adopted, these references have NOT been changed. For ease of contact; names, telephone numbers and locations have been regarded as non-material editorial changes and have been updated. As UDP policies and government legislation may have changed over time, before carrying out any work, it is recommended that you consult the current UDP http://www.westminster.gov.uk/planningandlicensing/udp/index.cfm for policy revisions and you may wish to check with planning and/or building control officers about your proposals. ROOFS A Guide to Alterations and Extensions on Domestic Buildings c:\documents and settings\chris\my documents\webspgs\roofsweb.doc\0 26/11/2004 CONTENTS 1. Introduction 2. Legislation 3. History 4. Unitary Development Plan Policies 5. The Design Of Roof Alterations and Extensions Setting Out General Rules Party Wall Upstands Cornices, Parapets and Balustrades Roof Coverings Parapet Gutters Chimney Stacks and Pots Dormer Windows: Number and Positioning Dormer Design Rooflights Fire Escapes Roof Level Plant Pipework Roof Terraces End of Terrace Projections from the Building Line 6. Special Cases Semi-Detached Houses With Parapets Overhanging and Gabled Roofs Gaps Between Buildings Butterfly Roofs 7. Contracts 8. Other Guidance c:\documents and settings\chris\my documents\webspgs\roofsweb.doc\0 26/11/2004 1. INTRODUCTION Alterations and extensions are often necessary to modernise, adapt, enlarge or extend the life of a building.
  • 123 W. Main Street – Noncontributing

    123 W. Main Street – Noncontributing

    123 W. Main Street – Noncontributing Built ca. 1985, this two-story side-gabled commercial building has a roof of asphalt shingles, an exterior of brick veneer, one-over-one double hung vinyl sash windows with flanking shutters and concrete sills, an interior concrete chimney and two, hipped metal roof bay windows on the main façade. The main entrance has an aluminum and glass door with a canvas canopy. Decorative brick corbelling is on the corners of the building. 141 W. Main Street – Noncontributing Located at this address is a ca. 1970, brick veneer, flat-roofed rectangular commercial building with six recessed bays flanking a central recessed entrance bay. 145 W. Main Street – Contributing At this location is a two-and one-half-story Queen Anne style dwelling built with Colonial Revival influence in 1898 as the home of the John Robertson family. It was used in the 1940s and 50s as a rest home for the elderly. Currently, the house is used commercially for a real estate company. The house has a continuous rock-faced concrete block foundation, a hipped roof of asphalt shingles, a central interior brick chimney and an exterior of weatherboard siding. On the main (N) façade is a full-width porch with swag extensions on the east and west facades and triple sets of fluted Corinthian columns resting on a closed, rock -faced concrete railing with sections of milled wood railings. The main entrance has original paired single-light glass and wood doors over which is a single-light rectangular transom. Flanking the entrance are two bay windows; one has two large single-light curved windows with multi-light transoms and the other has three narrow single-light windows with multi-light transoms.
  • Roofline Windowline Cladding Roofline

    Roofline Windowline Cladding Roofline

    Roofline Windowline Cladding Edition 7 PVC-UE...the roofline, specifier's windowline choice of Roofline and cladding products Windowline Cladding Specification Guide Contents Contents Celuform 3 Benefits of Celuform PVC-UE & PVC-U 4 Roofline Range and Colours 5 Fascia Installation Details 7 Fascia Installation Details 8 Bargeboard Installation Details 9 Soffit Installation Details 10 Roofline Range & Dimensions 11 Roofline Range & Dimensions 12 Boxed End Installation Details Roofline 13 Roofline Ventilation 14 Roofline Ventilation & Eaves Protection 15 Soffit Range 16-17 Typical Jointing Details 18 Working with Woodgrain Products: Roofline 19 Rafter Foot Covers 20 Fixing Summary - Roofline 21 White Cladding Installations 22 White Cladding Installations 24 White Cladding Installations 26 Cladding Range Celuform 27 Fixing Summary - Cladding Clading the UK’s first 28 Celuex Textured Cladding Installations 30 Celutex Cladding Range manufacturer of 31 Fixing Summary - Celutex Cladding PVC-UE building 32 Windowboard & Internal Trims products 34 Windowboard Range & Trims 35 Trim Range Window boards Window boards 36 Frequently Asked Questions 37 Product Characteristics 38 Product Characteristics Technical 39 Fixing Summary - General Head Office, Scunthorpe 2 ROOFLINE, CLADDING, WINDOWBOARDS & TRIMS Celuform Benefits of PVC-UE & PVC-U Celuform’s popularity in the new build, specification, Product Guarantees architectural and refurbishment sector stems from its Celuform’s white products are guaranteed for 20 years and product reliability and wide acceptance amongst the woodgrains for 10 years provided that approved installation trade and the general public. Refurbishment and maintenance instructions are followed. Copies of the programmes by housing associations and local guarantees are available from marketing on 0870 240 6107 GUARANTEE authorities acknowledge Celuform products as the Twenty Year Ten Year Colour route to lower maintenance costs.