Coyote Saddlebag™ Mounting Instructions
Total Page:16
File Type:pdf, Size:1020Kb
COYOTE SADDLEBAG™ MOUNTING INSTRUCTIONS NOTE: Failure to follow recommended mounting and installation instructions voids warranty. Manufacturer is not liable for any damage, injury or death that results from improper use and installation of products. By installing these products, user accepts all liabilities, terms and conditions outlined in the Liability & Warranty statement included here. PRE-FITTING & QUICK MOUNTING YOUR COYOTE SADDLEBAG™ Giant Loop highly recommends installing 1 POSITION YOUR COYOTE SADDLEBAG one or more of the included Hot Springs Take a few minutes to familiarize yourself with the Heat Shields to prevent any and all parts We recommend using the optional GL of your Coyote Saddlebag and/or side Mounts to secure your saddlebage to Coyote Saddlebag and how it will mount to your motorcycle. panels from making direct contact with existing bolt-mounted points, keeping Stuff your Coyote Saddlebag with a sleeping bag to fill the exhaust components. straps away from hot exhaust components. bag’s volume, allowing you to see the tailored shape and to become familiar with the bag’s fit on your machine. It can be positioned differently on every motorcycle make and model and according to each rider’s preferences. Lay stuffed Coyote Saddlebag centered across back of bike. Experiment with Coyote Saddlebag positioning on bike. Look for unobstructed connection locations, adequate heat protection with Hot Springs Heat Shield and plenty of clearance so the Saddlebag does not interfere with the safe operation of your motorcycle. 2 SECURE SIDE MOUNTS Look carefully at all your potential connection positions. Connect the two side mount points directly to the subframe or frame, making certain the straps cannot slide up and become loose. Avoid wrapping straps around metal edges that can wear through webbing, and provide plenty of clearance around exhaust components. 3 REAR MOUNTING OPTIONS Installation Using Optional Webbing Strap If the fender hooks do not fit on your fender or rack, then remove the hooks and use the included length of ballistic webbing to secure the rear of the Coyote Saddlebag. Replace the webbing Unthread fender Draw webbing through the thumb lock. hooks from going back thumb lock through Adjustable ballistic webbing buckles are buckles and pull channels located under a protective flap inside the them through top center of the Coyote Saddlebag. the bottom. Fender Hooks Installation OPTION A OPTION B OPTION C Single option Double option Fender Hood Mounts On fenders where the fender hooks Tail Rack Mounts Sandwich Webbing Between Fender Mount Using can be secured to the edges, simply Thread one end of the webbing And Under Fender Support Footman Loop(s) place the fender hooks on the fender anchor strap through one thumb Loosen the bolts on underside of fender, Simple modifications, such as installing edges and tighten using the thumblock lock, down and under or through allowing you to separate the fender stainless steel hardware are also good buckles on the top center of Saddlebag. rack. Then threaded back through enough to insert the webbing between tail anchor options. Install a footman loop Position Saddlebag 3-4” farther back the saddlebag, secure tightly by the fender and the under fender support. (one or more) far enough to the rear of than you want it to mount, then when cinching both thumb locks. Retighten the fender, tighten and secure the fender to allow the saddlebag to sit side anchor straps are tensioned the webbing with thumb locks. When properly behind the rear of the seat once Saddlebag will slide forward, spreading Saddlebag is not mounted, keep loose the front straps are tightened. the fender hooks and tensioning them ends secured with a buckle, zip tie, etc. tightly to the rear fender. On some bikes the front of the Saddlebag can be simply tucked under the seat back and held in place with tension on the side straps. COYOTE SADDLEBAG™ PACKING TIPS • The Coyote Saddlebag is Adventure Proof - not waterproof. • To avoid wearing through the Coyote Saddlebag from Pack gear in plastic bags inside the rugged outer vibrations, pack all sharp and/or hard items inside a Bombshell™ - or use 100% waterproof Coyote Dry Pods. protective layer. For example, create a sleeve for tire irons from a section of old inner tuber, pack tools in rolls and • Do not overstuff or over-load Saddlebag. The challenge wrap other hard items in clothing. should be to pack as little as necessary to be safe, comfortable and self-sufficient. Go light. Go fast. Go far. • Use “beavertail” and compression straps to secure 100% waterproof Rogue Dry Bag, tent, tarp, bivy sack, sleeping • Take care to pack the heaviest gear as low as possible, pad, rain gear and other lightweight items to outside of bag. preferably below the seat line, with weight balanced from side-to-side. Your bike will handle far better with weight • Visit our website at GiantLoopMoto.com for more tips from positioned as close to the center of the bike as possible. riders and instructions. • Throw the Coyote Saddlebag over your shoulder for easy carrying. RECOMMENDED OPTIONAL ACCESSORIES Vinyl Protective Film Possibles Pouch Rogue Dry Bag Travel Shoulder Strap GL Mounts Prevents scuff and scratches on plastics Straps to “legs” of Saddlebag, Integrates with compression Clips onto Saddlebag for Stamped and coined stainless and body panels beneath Saddlebag. creating 2-liter quickly accessible straps, providing 17 liters of hand-free carrying. steel quick mounts keep anchor external pockets. 100% waterproof storage straps away from hot exhaust. Pictured on Coyote TERMS OF USE, LIMITED LIFETIME WARRANTY AND LIABILITY WAIVER Giant Loop LLC, an Oregon company, having its principal place of business in Bend, OR If you experience any problems with the Product within the warranty period please return the (“Giant Loop”) offers its motorcycle bag (the “Product”) with the terms, conditions and Product or contact us for prompt repair or replacement at our discretion: notices as follows: [email protected], 458-206-9113. TERMS OF USE Excepting the warranties stated in the preceding paragraph, Giant Loop hereby disclaims This Product is offered to you conditioned upon your acceptance without modification of all other warranties and conditions with regard to the Product including all implied the terms, conditions, and notices contained herein. Installation and/or use of this product warranties and conditions of merchantability and fitness for a particular purpose. There are implies acceptance of all such terms, conditions, and notices. If you do not agree to these no warranties which extend beyond the description on the face hereof. Giant Loop does terms, do not buy the Product. If you have already bought the Product and do not agree to not warrant against damages or defects arising out of use or installation of the Product. these terms, return this Product promptly, including the packaging and all written materials, Installation instructions are provided for your convenience. Giant Loop is not responsible to Giant Loop. for any damages arising out of the installation, improper or otherwise, of the Product. No warranty of any kind, expressed or implied, is made regarding the safety of this Product. LIMITATION OF LIABILITY AND LIMITED LIFETIME WARRANTY DISCLAIMER Giant Loop offers a money-back guarantee provided the Product is returned, in unused To the extent allowed by law, Giant Loop shall not be held liable for any direct, indirect, punitive, condition with original receipt, within 30 days of purchase. Giant Loop reserves the right to incidental, special or consequential damages arising out of, or connected with, the use or subtract a 15% re-stocking fee from the refund amount. Standard shipping fees will apply to misuse of this Product. Buyer assumes all risks and liability arising from use of this Product. exchanged items and are paid by the customer. If you receive damaged or defective goods or items that you did not order, the items must remain unopened and unused so we can ENTIRE AGREEMENT credit you in full, including return shipping if it is a result of our error, mishandled shipping or This document states the entire obligation of Giant Loop with respect to the Product. If any manufacturer’s defect. part of this agreement is determined to be void, invalid, unenforceable or illegal, including, but not limited to the warranty disclaimers and liability limitations set forth above, then the Giant Loop provides to the original purchaser a limited lifetime warranty against defects in remainder of the agreement shall remain in full force and effect. materials or craftsmanship if purchased directly from a Giant Loop authorized dealer. This warranty covers defective materials and craftsmanship only, and does not include damage due APPLICABLE LAW to normal wear and tear or misuse. Failure to comply with the included instructions for this This agreement is governed by the laws of Oregon, USA. You hereby consent to the Product will void the limited lifetime warranty. If defects in the materials or craftsmanship of exclusive jurisdiction and venue of the courts of Oregon, USA, in all disputes arising the Product exist, notify Giant Loop immediately of the defect. Giant Loop will provide for repair out of or relating to the use of this product. or replacement of the Product, after Giant Loop has determined, in our sole discretion, that a defect is present. Proof of purchase is required to utilize the limited warranty provisions. Please keep in touch. We want to hear about your adventures! Giant Loop LLC 458-206-9113 Bend, Oregon USA GiantLoopMoto.com [email protected] ©2016 all rights reserved Giant Loop LLC. Giant Loop® and GL® logo are registered trademarks..