Sashiko Tissue Pouch

Total Page:16

File Type:pdf, Size:1020Kb

Sashiko Tissue Pouch IC-E-142 1/5 Sashiko Tissue Pouch Materials • Cotton Cloth (22x17 ㎝ ) • Sashiko thread or embroidery thread • Sewing thread • Sashiko Pattern (As per attached) 20x15cm Tools • Sashiko needles • Tracing Paper “Clover • Hot Hemmer (Long) • Jumbo Wonder Clips (Art No.2007/2009) Chacopy” (Art No. 434) (Art No. 7701) (24 pcs.) (Art No. 3157) • Flower Head Pins • Rotary Cutter(45 mm) • Graph Ruler • Adjustable Ring Thimble (0.55 mm)(Art No. 2505) (Art No.7500) (Art No.7703) with Plate (Art No. 611) Finished size ; 13x9cm • Tracer • Sewing scissors IC-E-142 2/5 Sashiko Tissue Pouch Making 1 Lay fabric on a hard, flat surface. Cover with "Clover Chacopy", chalk side facing down on fabric. Place pattern piece centrally on top with 1cm margin around all sides. Trace the design lines with a tracer. 2 With the pattern now transferred to the fabric, stitch along the design lines using Sashiko Needles. Tip; Work the straight lines first, using the longer Sashiko needle. Keep stitches even and avoid tension. Using the shorter Sashiko needle and working fewer stitches at a time, sew the curves and finer detail. IC-E-142 3/5 Sashiko Tissue Pouch 3 Leave a 1cm unembroidered margin along L and R sides, (see image), L R trim top and bottom raw edges to give a 15cm 15cm length, taking great care not to cut into embroidered areas. 4 1cm Along L and R sides, fold the 1cm of plain fabric to wrong side followed by 1cm of ws embroidered fabric, making a double ws fold hem. Blind stitch with sewing thread. blind stitch IC-E-142 4/5 Sashiko Tissue Pouch 5 Fold the fabric as shown in the image. (WS out with hems facing together centrally) ws 6 blanket stitch Work a half-back stitch or machine along the 2 remaining sides. half-back stitch Finish raw edges with a blanket stitch. 1 2 3 4 5 5 6 3 4 1 2 Turn the pouch to RS. ws IC-E-142 5/5 Sashiko Tissue Pouch 13cm 15cm 18cm 4.5cm 20cm 4.5cm.
Recommended publications
  • Winter Mitten Making
    1 Winter Mitten Making By: Kielyn & Dave Marrone Version 2.0, October 2015 http://lureofthenorth.com 2 Note 1- This booklet is part of a series of DIY booklets published by Lure of the North. For all other publications in this series, please see our website at lureofthenorth.com. Published instructional booklets can be found under "Info Hub" in the main navigation menu. Note 2 – Lure Mitten Making Kits: These instructions are intended to be accompanied by our Mitten Making Kit, which is available through the “Store” section of our website at: http://lureofthenorth.com/shop. Of course, you can also gather all materials yourself and simply use these instructions as a guide, modifying to suit your requirements. Note 3 - Distribution: Feel free to distribute these instructions to anyone you please, with the requirement that this package be distributed in its entirety with no modifications whatsoever. These instructions are also not to be used for any commercial purpose. Thank you! Note 4 – Feedback and Further Help: Feedback is welcomed to improve clarity in future editions. For even more assistance you might consider taking a mitten making workshop with us. These workshops are run throughout Ontario, and include hands-on instructions and all materials. Go to lureofthenorth.com/calendar for an up to date schedule. Our Philosophy: This booklet describes our understanding of a traditional craft – these skills and this knowledge has traditionally been handed down from person to person and now we are attempting to do the same. We are happy to have the opportunity to share this knowledge with you, however, if you use these instructions and find them helpful, please give credit where it is due.
    [Show full text]
  • Mending As Practice and Expression Pocosin Arts Online - August 2021 Material Suggestions
    Mending as Practice and Expression Pocosin Arts Online - August 2021 Material Suggestions I want this experience to ft with what you have on hand and what you want to learn! I will link to sources of some supplies I like below, but there is no need to purchase anything unless you want to and think you will use it. You can also check the links to compare supplies to those you may already have. And of course you can get supplies anywhere you like. The most important thing you will need is some fabric scraps or worn-out textles to practce mending on (not your absolute favorite thing to start with). There are two broad categories of fabrics, based on how they are made; woven (like jeans, dress shirts, and sheets) and knited (like sweaters, socks, and T-shirts). We will talk a lot more about these in class. Each type lends itself to somewhat diferent tools and techniques. If you can, I encourage you to fnd a few scraps of each type to practce on, ideally in fabrics that are similar to the items you want to mend. These will also be a good source of material to cut patches from. I will be in touch before our class starts to fnd out about the projects you want to work on. For now, here are some general suggestons of materials and tools you may want to have on hand. In the meantme, feel free to contact me with any questons! [email protected] Threads You may want to use anything from sewing thread to wool yarn in your mending, depending on what you want to fx.
    [Show full text]
  • Multifunctional Blanket Stitch By: Magdamagda
    Multifunctional Blanket Stitch By: magdamagda http://www.burdastyle.com/techniques/multifunctional-blanket-stitch What better time for hand sewing revelations than now when my sewing machine is in service? sigh I have been thinking about this for some time – one type of hand stitch that comes in handy in so many situations! I’ll point out the ones I thought about, new ideas are welcome! Known as the “blanket stitch” it can back up your sewing machine in some situations or even go where no sewing machine has gone before!!!! First this is how it’s done: I prefer to stitch right to left. Bring the thread to front at desired distance from the edge ( about 2 mm for buttonholes, 4-5 mm for serging). Take the thread over the edge of the cloth and pull the needle back to front through the same point. Make a loop around this thread segment at the cloth edge level. At some distance from the first “entry point” (3-4 mm for serging) and at the same distance from the edge thrust the needle from front to back and pull the needle through the loop formed by the remaining thread. You can help yourself by keeping the thread over the index finger of the left hand while doing so. Repeat, repeat, repeat..:) Tip: If you are serging, make sure not to pull the thread too much and cause the fabric to pluck. If you’re working on a button hole or doing some embroidery work pull the thread just right so that the thread remains straight: not too loose, not too tight:) Tip-tip:) : If the thread gets twisted on itself , you can straighten it out by sliding the needle close to the fabric and running the thread through your fingers from the fixed end towards the loose end (a few times) Note: Whatever you plan to use this stitch for, you’ll find it ideal when dealing with curved lines! A video to catch the basic move: Step 1 — [serging] Multifunctional Blanket Stitch 1 Use it for: 1) Serging (overcasting the raw edges of a fabric to prevent unraveling)..
    [Show full text]
  • What Is Sashiko?
    What is Sashiko? Sashiko is a form of embroidery that originated in Japan around 200 years ago. It was used to repair and bulk up clothing, blankets, and other textiles for the cold weather as many regions of the country experienced frigid winters. As such, the focus was less on what the work looked like, and more on how quickly it could be made. Today, Sashiko has become a form of decorative embroidery enjoyed by many people around the world. Traditional patterns are still practiced among modern ones. However, the root of Sashiko remains the same: it doesn’t have to be perfect as long as you enjoy doing it. A jacket embroidered all over with Sashiko patterns from the Metropolitan Museum of Art collections. A closeup of a kimono with Sashiko detailing from the Metropolitan Museum of Art collections. Sashiko Project by Aya Kusumoto Instructions for Sashiko on paper Step 1 - Fold along the solid black line in the middle. Step 2 - Take your thread and fold it in half, then thread the folded end through the needle. This is called double-threading. You can single thread your needle instead but you will be able to see the pattern more clearly the thicker the thread is. Tie a double knot at the end. Step 3 - Start wherever you want on your pattern with the printed side facing up. The printed side will become the back with the knots. Pierce your needle through one end of a stitch, then without fully pulling your needle through, push it back up through the other end of the stitch.
    [Show full text]
  • Stitches and Seam Techniques
    Stitches and Seam Techniques Seen on Dark Age / Medieval Garments in Various Museum Collections The following notes have been gathered while attempting to learn stitches and construction techniques in use during the Dark Ages / Medieval period. The following is in no way a complete report, but only an indication of some techniques observed on extant Dark Ages / Medieval garments. Hopefully, others who are researching “actual” garments of the period in question will also report on their findings, so that comparisons can be made and a better total understanding achieved. Jennifer Baker –New Varangian Guard – Hodegon Branch – 2009 Contents VIKING AND SAXON STITCHES 1. RUNNING STITCH 2. OVERSEWING 3. HERRINGBONE 4. BLANKET STITCH SEAMS 1. SEAMS 2. BUTTED SEAMS 3. STAND-UP SEAM 4. SEAMS SPREAD OPEN AFTER JOIN IS MADE 5. “LAPPED” FELL SEAM 6. FELL SEAM WORKED ON WRONG SIDE OF GARMENT FINISHES ON RAW EDGES OF SEAMS SEWING ON TABLET WOVEN BRAID HEMS OTHER STITCHES FOUND IN ARCHEOLOGICAL FINDS REFERENCES 1 Stitches and Seam Techniques VIKING AND SAXON STITCHES There are only four basic stitches to master: 1. RUNNING STITCH , 2. OVERSEWING, ALSO KNOWN AS OVERCAST STITCH OR WHIP STITCH 3. HERRINGBONE , ALSO KNOWN AS CATCH STITCH 4. AND BLANKET STITCH. ALSO KNOWN AS BUTTONHOLE STITCH Running stitch is probably the easiest to start with followed by oversewing. With these two stitches you can make clothing. The other two are for decorative edging. These directions are for a right handed person, if you are left handed remember to reverse all directions. 2 Stitches and Seam Techniques RUNNING STITCH A running stitch is done through one or more layers of fabric (but normally two or more), with the needle going down and up, down and up, in an essentially straight line.
    [Show full text]
  • Powerhouse Museum Lace Collection: Glossary of Terms Used in the Documentation – Blue Files and Collection Notebooks
    Book Appendix Glossary 12-02 Powerhouse Museum Lace Collection: Glossary of terms used in the documentation – Blue files and collection notebooks. Rosemary Shepherd: 1983 to 2003 The following references were used in the documentation. For needle laces: Therese de Dillmont, The Complete Encyclopaedia of Needlework, Running Press reprint, Philadelphia, 1971 For bobbin laces: Bridget M Cook and Geraldine Stott, The Book of Bobbin Lace Stitches, A H & A W Reed, Sydney, 1980 The principal historical reference: Santina Levey, Lace a History, Victoria and Albert Museum and W H Maney, Leeds, 1983 In compiling the glossary reference was also made to Alexandra Stillwell’s Illustrated dictionary of lacemaking, Cassell, London 1996 General lace and lacemaking terms A border, flounce or edging is a length of lace with one shaped edge (headside) and one straight edge (footside). The headside shaping may be as insignificant as a straight or undulating line of picots, or as pronounced as deep ‘van Dyke’ scallops. ‘Border’ is used for laces to 100mm and ‘flounce’ for laces wider than 100 mm and these are the terms used in the documentation of the Powerhouse collection. The term ‘lace edging’ is often used elsewhere instead of border, for very narrow laces. An insertion is usually a length of lace with two straight edges (footsides) which are stitched directly onto the mounting fabric, the fabric then being cut away behind the lace. Ocasionally lace insertions are shaped (for example, square or triangular motifs for use on household linen) in which case they are entirely enclosed by a footside. See also ‘panel’ and ‘engrelure’ A lace panel is usually has finished edges, enclosing a specially designed motif.
    [Show full text]
  • Attic Heirlooms
    Attic Heirlooms Attic Heirlooms by Trish 2019 February Ornament Attic Heirlooms www.attic-heirlooms.com [email protected] Like us on our Attic Heirlooms Facebook page! This is free for individual use only for a limited time. No commercial use of the patterns are allowed without receiving prior permission. The pattern is a free download for you to print and use. It is only available free during the month it is offered. Kits can be ordered anytime at: www.attic-heirlooms.com The kit will contain all the fabric needed to make the ornament, paper backed fusible and any embellishing items for that month if applicable. French knot - Hold the needle in your right hand. With your left hand, wrap the thread around the needle 1-3 times, de- pending on the size of knot you want. Be sure needle points away from the fabric when you wrap the thread and wrap it Attic Heirlooms close to where the thread comes through the fabric. Insert the needle close to where it came out. Holding the knot in place, you can pull the needle to the wrong side of fabric. Lazy daisy stitch – Blanket stitch Hold thread down with Take an upright the thumb and insert stitch the thread 3 needle where it first came up with the came out. Bring point needle pointed out a short distance down, keeping the thread under away keeping the needle 2 on top of the thread. the needle and coming out Fasten the loop down on the line. 1 with a short stitch. Attic Heirlooms by Trish 2019 February Ornament Read all instructions before starting 1.
    [Show full text]
  • Stitch Chart
    Stitch Chart Memo • When any of the following stitches (reverse stitch patterns) are selected, pressing (Reverse/ Reinforcement stitch button) will sew reverse stitches. Stitch 110 stitches 00 02 05 No. 100 stitches 00 01 04 When any other stitch is selected, pressing (Reverse/Reinforcement stitch button) will sew reinforcement stitches. • The stitch pattern symbols indicate the following. 1 Left needle position a d e 2 b d e Middle (center) needle position c 3 Right needle position 4 Reverse stitch pattern 5 Reinforcement stitch pattern Note • The walking foot can only be used with straight or zigzag stitch patterns. Do not sew reverse stitches with the walking foot. • When using the twin needle, set the machine to the twin needle mode. For details, refer to the Operation Manual. *1 Twin needle can be used by attaching zigzag foot “J”. For details on using the twin needle, refer to the Operation Manual. No. Stitch width Stitch length Presser (mm (inch)) (mm (inch)) Stitch 110 100 Stitch name/Applications stitches stitches foot Auto. Auto. model model Manual Manual Straight stitch (Left) 0.0 (0) 2.5 (3/32) 00*1 00*1 J General sewing, gather, pintuck, etc. 0.0 - 7.0 0.2 - 5.0 (0 - 1/4) (1/64 - 3/16) Straight stitch (Left) 0.0 (0) 2.5 (3/32) 01*1 –JGeneral sewing, gather, pintuck, etc. 0.0 - 7.0 0.2 - 5.0 (0 - 1/4) (1/64 - 3/16) Straight stitch (Middle) 3.5 (1/8) 2.5 (3/32) 02*1 01*1 J General sewing, gather, pintuck, etc.
    [Show full text]
  • Stitch Setting Chart
    STITCH SETTING CHART STITCH SETTING CHART The following chart shows information for each utility stitch concerning applications, stitch lengths, stitch widths, and whether or not the twin needle mode can be used. Stitch width Stitch length Presser foot [mm (inch.)] [mm (inch.)] Twin Stitch Stitch name Applications needle Auto. Manual Auto. Manual Straight stitch General sewing, gather, pintuck, (Left) etc. Reverse stitch is sewn while 0.0 0.0 - 7.0 2.5 0.2 - 5.0 OK pressing “Reverse/ (0) (0 - 1/4) (3/32) (1/64 - 3/16) ( J ) Reinforcement Stitch” button. Straight stitch General sewing, gather, pintuck, (Left) etc. Reinforcement stitch is sewn 0.0 0.0 - 7.0 2.5 0.2 - 5.0 OK while pressing “Reverse/ (0) (0 - 1/4) (3/32) (1/64 - 3/16) ( J ) Reinforcement Stitch” button. Straight stitch General sewing, gather, pintuck, (Middle) etc. Reverse stitch is sewn while 3.5 0.0 - 7.0 2.5 0.2 - 5.0 OK pressing “Reverse/ (1/8) (0 - 1/4) (3/32) (1/64 - 3/16) ( J ) Reinforcement Stitch” button. Straight stitch General sewing, gather, pintuck, (Middle) etc. Reinforcement stitch is sewn 3.5 0.0 - 7.0 2.5 0.2 - 5.0 OK while pressing “Reverse/ (1/8) (0 - 1/4) (3/32) (1/64 - 3/16) ( J ) Reinforcement Stitch” button. Triple stretch General sewing for 0.0 0.0 - 7.0 2.5 1.5 - 4.0 OK stitch reinforcement and decorative (0) (0 - 1/4) (3/32) (1/16 - 3/16) ( J ) topstitching Stem stitch Reinforced stitching, sewing and 1.0 1.0 - 3.0 2.5 1.0 - 4.0 OK decorative applications (1/16) (1/16 - 1/8) (3/32) (1/16 - 3/16) ( J ) Decorative Decorative stitching, top 0.0 0.0 - 7.0 2.5 1.0 - 4.0 OK stitch stitching (0) (0 - 1/4) (3/32) (1/16 - 3/16) ( J ) Basting stitch Basting 0.0 0.0 - 7.0 20.0 5.0 - 30.0 NO (0) (0 - 1/4) (3/4) (3/16 - 1-3/16) Zigzag stitch For overcasting, mending.
    [Show full text]
  • Sashiko Tote
    Sashiko Tote You can never have too many bags! Create unique tote featuring Sashiko quilting and accent stitching. This project is quick and easy to make using the Baby Lock Sashiko machine. Skill Level: Beginner Created by: Kelly Laws, Marketing Project Manager Supplies: Baby Lock Sewing Machine Baby Lock Sashiko Twenty 4” cotton print squares in different colors 1 yard fusible fleece 1 1/4 yard coordinating cotton fabric 2 ½ yards ¾” wide gross grain ribbon All-purpose thread to match fabrics 30-Weight thread in white and black Fusible Web (optional) Iron and Ironing board Scissors Pins Ruler Chalk Baby Lock Sewing Project: Sashiko Tote Page 1 of 3 Instructions: 1. Thread the machine with all-purpose thread to match your fabrics. Using a ¼” seam sew five blocks together to form a row. 2. Create 3 more rows of 5 blocks alternating the block colors. 3. Sew two rows together to create the pieced band for the bag front. 4. Repeat to make a pieced band for the other side of the bag. 5. Cut four pieces 18” x 15” from the cotton fabric. 6. Cut two pieces of fusible fleece 18” x 15”. 7. Following the manufactures directions, fuse the fleece to the wrong side of two of the 18” x 15” pieces. 8. Sew the two fleece pieces together along one of the 15” sides. 9. Sew the other two 18” x 15” pieces together along one of the 15” sides. This is the tote lining, set this piece aside for later. 10. Open the piece out into one long strip.
    [Show full text]
  • 1 MULTIUSE, EMBROIDERY and SEWING SCISSORS Stainless Steel
    WWW.RAMUNDI.IT GIMAP s.r.l. 23834 PREMANA (LC) ITALY Zona Ind. Giabbio Tel. +39 0341 818 000 The line is composed by extremely high performance items, result of over 70 years of research of perfect cutting performances. Every single item is produced with the best materials and is carefully controlled by the expert hands of our artisans, from the raw material to the last control phase. The Extra line quality will satisfy all your needs. MULTIUSE, EMBROIDERY AND SEWING SCISSORS Stainless steel and handles in nylon 6 Series of professional scissors for textile, embroidery and multipurpose use. Made in AISI 420 steel, these scissors will allow you to made every kind of job with an extreme confort and precision. The scissors are made with special machines that make a perfect finish and operation that lasts over time. Nylon 6 handle are made with fiberglass with an innovative design and it can be use in contact with food. multiuse scissors in stainless steel and handles 553/5 in nylon 6 13 cm 553/6 15 cm 553 552/7,5 19 cm 552/8,5 21 cm 552/9,5 24 cm 552/10,5 26 cm 552/11 28 cm 552M Left- hand 22 cm 552 240/1/3,5 Embroidery scissors 9 cm 241/1/4 Embroidery scissors bent 10 cm 241/1/4 240/1/3,5 351/4 Sewing scissors 10,5 cm 351/5 12,5 cm 351/6 15 cm 351 485/7 Multiuse scissors 19 cm 360MN/4,5 Thread clipper 485/7 360MN/4,5 1 WWW.RAMUNDI.IT GIMAP s.r.l.
    [Show full text]
  • BL2102 February 2021
    Blackwork Journey Blog, February 2021 Looking forward in 2021 and beyond! February is a difficult month in the UK, as although Christmas is behind us, Spring still seems a long way away. However, for the first time in a year there are some positive things to report. The vaccines are being rolled out and there is hope that we can start to see a way forward and begin to look, albeit tentatively, to the future. Sashiko and quilted Phoenix project This design was my way of saying that there is a way forward out of Covid-19 into a new future, like the mythical bird who rose from the ashes, reborn, stronger and more powerful. In Japan, as earlier in China, the Phoenix was adopted as a symbol of the imperial household, particularly the Empress. This mythical bird represents fire, the sun, justice, obedience and fidelity. The Asian Phoenix is different from the Phoenix found in Egypt and Greece and is a bird of completely different feathers and traditions. The ornamental design of the Dragon (Emperor) and Phoenix (Empress) on the doors of the Hall of Heavenly and Terrestrial Union, Beijing, China A phoenix depicted in a book of legendary creatures by FJ Bertuch (1747–1822) Presidential standard of Greece 1 Blackwork Journey © Blackwork Journey Blog, February 2021 The Phoenix from Greek mythology was a feathered creature of great size with large wings and talons, its plumage vibrant and beautiful. It is still used today as the emblem on the Presidential standard of Greece. The Phoenix lived for 500 years before it built its own funeral pyre, burst into flames and died, consumed in its own fiery inferno..
    [Show full text]