PRODUCT SPECS

Vortex Premium Plastisol Inks are designed to be the best inks on the market. Vortex is a smooth surface matte finish ink designed for high production wet-on-wet printing. You no longer have to choose between quality and price! SUPREME PLASTISOL INKS Get them both with this exciting new product line.

HIGHLIGHTS PRINTING TIPS ENSURE SUCCESS

• Smooth surface matte finish • For best results, follow the • All Vortex ink should be stirred printing guidelines listed below prior to use • Perfect for manual or automatic presses. Vortex is resistant to build • Avoid excessive squeegee • Always preform a fusion test prior up. Great for high production pressure to production to insure good wet-on-wet printing adhesion • Using the correct underbase will • Wide range of vibrant colors enhance the print quality designed for easily transitioning from competitive brands

• Superior ink at a great price

Printing Guidelines

Fabric Types Squeegee 100% cotton, cotton blends, and polyesters. Synthetics 60-80 Durometer or 70/90/70 triple durometer should be tested. To reduce the risk of dye migration, low bleed white underbase is required when printing on cotton blends, polyester, or polyester blends

Mesh Stencil 110-305 t/in Direct emulsion - 2 coats per side Screen tension of 20-35 n/cm2 Thick stencil - 200 - 400 micron capillary film

Additives Curing Instructions 3% Maximum viscosity buster Gels – 230°F 10% Maximum curable reducer Cures – 320°F Entire Ink Film 5% Maximum soft hand additive

*If printing the Low Bleed White on fabrics containing certain dyes, always test for the potential to ghost. Avoid stacking printed garments while hot. COLOR CHART

Light Navy Royal Blue Mono Blue Bright Blue VORTEXLN VORTEXRB VORTEXMB VORTEXBB

Chrome Green Tahiti Green Kelly Green Bright Green VORTEXCG VORTEXTG VORTEXKG VORTEXBG

Dark Brown Sienna Brown Deep Purple Magenta VORTEXDB VORTEXSB VORTEXDP VORTEXM

Cardinal Bright Red Scarlet Orange VORTEXC VORTEXBR VORTEXS VORTEXO

HS Golden Chrome Yellow Khaki Gray VORTEXHSG VORTEXCY VORTEXK VORTEXG

Low Bleed White Black VORTEXWH VORTEXBK HOW DO I FIND MY PART NUMBER? VORTEX PART NUMBER KEY Color + Size = Part Number COMPLETE Example: VORTEXWH + 04 = VORTEXWH-04 (Low Bleed White) (1 Quart) SCREEN PRINTING SOLUTIONS AVAILABLE SIZES visit GOGSG.COM 04 = Quart 05 = Five Gallons 01 = One Gallon 30 = Thirty Gallons (Limited*)