DOCSLIB.ORG

Report OCTOBER 15, 2011 10/15/2011 Catalog Page: 1

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Report OCTOBER 15, 2011 10/15/2011 Catalog Page: 1 report OCTOBER_15,_2011 10/15/2011 Catalog Page: 1 Lot # Quan Description Lot # Quan Description ------ ---- ------------------------------ ------ ---- ------------------------------ 1 1 STIHL Chain Saw 52 1 Rims, Hub Caps & Wheel Chucks 2 1 STIHL 084AV Chain Saw 53 1 Lathe & Stand 3 1 STIHL MS290 Chain Saw 54 1 Power Hacksaw 4 1 Paint Sprayer 55 1 READING Tool Box 5 1 Blower 56 1 TRUKBOX 6 1 20 Ton Hyd Jack 57 1 TRUKBOX 7 1 20 Ton Hyd Jack 58 1 Window Door 8 1 Trimmer 59 1 Breaker 9 1 STIHL 032AV Chain Saw 60 1 Breaker 10 1 Rims & Transmission 61 1 Breaker 11 1 Grill 62 1 Bits 12 1 3 Chain Saws 63 1 Utility Sharpener 13 1 Ladder Rack 64 1 Floor Jack 14 1 Tool Boxes & Contents 65A 1 1 Ton Chain Hoist 15 1 Cutting Edge 65B 1 1 Ton Chain Hoist 16 1 Saw & Power Tools 65C 1 1 Ton Chain Hoist 17 1 Table Saw & Power Tools 65D 1 1 Ton Chain Hoist 18 1 Pumps 66A 1 Porta Power 19 1 Crate-Hooks 66B 1 Porta Power 20 1 MILWAULKEE Power Tools 66C 1 Porta Power 21 1 Compressor 67A 1 Socket Set 22 1 RYOBI Cordless Tool Set 67B 1 Socket Set 23 1 Sound System 67C 1 Socket Set 24 1 Jack 67D 1 Socket Set 25 1 Tonneau Cover 67E 1 Socket Set 26 1 Lot- Transits/ Tripods 68A 1 (3) 36" Bolt Cutters 27 1 Band Saw 68B 1 (3) 36" Bolt Cutters 28 1 Table Saw 69A 1 3 Boxes Padlocks 29 1 Torch Cart, Torches & Tanks 69B 1 3 Boxes Padlocks 30 1 Cement Chute 70 1 Box of Mixers 31 1 CRAFTSMAN Welder 71A 1 Cordless Drill 32 1 Pallet- Pumps 71B 1 Cordless Drill 33 1 Pallet- Misc. Tools 71C 1 Cordless Drill 34 1 Sand Blaster 71D 1 Cordless Drill 35 1 Fuel Tank 71E 1 Cordless Drill 36 1 Float Pump 71F 1 Cordless Drill 37 1 Pump 72A 1 Drill & Grinder Set 38 1 Pump 72B 1 Drill & Grinder Set 39 1 Pump 72C 1 Drill & Grinder Set 40 1 Pump 72D 1 Drill & Grinder Set 41 1 Electrical Cords 72E 1 Drill & Grinder Set 42 1 Canvas & Bucket Cover 72F 1 Drill & Grinder Set 43 1 Air Hose 73A 1 Large Socket Set 44A 1 Jackhammer 73B 1 Large Socket Set 44B 1 Jackhammer 73C 1 Large Socket Set Page 1 report 44C 1 Jackhammer 73D 1 Large Socket Set 44D 1 Jackhammer 73E 1 Large Socket Set 45 1 START ALL 73F 1 Large Socket Set 46 1 Pettet Stove & Pellets 74A 1 Large Sockets 47 1 2 Metal Sleves 74B 1 Large Sockets 48 1 File Cabinet & Cabinet 74C 1 Large Sockets 49 1 2 File Cabinets 74D 1 Large Sockets 50 1 3 Skylights 74E 1 Large Sockets 51 1 Pallet- Comp., Tools, Etc. 75A 1 Tire Step 75B 1 Tire Step 94A 1 2 3/4 Ton Hyd. Jack 76A 1 5 Chain Binders 94B 1 2 3/4 Ton Hyd. Jack 76B 1 5 Chain Binders 94C 1 2 3/4 Ton Hyd. Jack 77A 1 Portable Generator 94D 1 2 3/4 Ton Hyd. Jack 77B 1 Portable Generator 95A 1 10 Ton Porta Power 77C 1 Portable Generator 95B 1 10 Ton Porta Power 78A 1 Folding Ramp 95C 1 10 Ton Porta Power 78B 1 Folding Ramp 96 1 50 Ton Hyd. Jack 78C 1 Folding Ramp 97 1 50 Ton Air Jack 78D 1 Folding Ramp 98 1 50 Ton Air Jack 79A 1 Truck Winch 99 1 50 Ton Air Jack 79B 1 Truck Winch 100 1 50 Ton Air Jack 79C 1 Truck Winch 101A 1 21 Pc. 1" Drive Socket Set 80A 1 26 Pc. Socket Set 101B 1 21 Pc. 1" Drive Socket Set 80B 1 26 Pc. Socket Set 102A 1 3 Drill Bit Set 80C 1 26 Pc. Socket Set 102B 1 3 Drill Bit Set 81 1 (3) 20 Ton Jacks 103 1 (2) 8 Pc. Heavy Socket Sets 82A 1 3 Pipe Wrenches 104 1 2 Boxes Ratchets Pcs. 82B 1 3 Pipe Wrenches 105A 1 (3) 2" Ratchet Straps 83A 1 3 Boxes Ratchet Straps 105B 1 (3) 2" Ratchet Straps 83B 1 3 Boxes Ratchet Straps 106A 1 (3) 14 Pc. Wrench Sets 84A 1 2 Ton Chain Hoist 106B 1 (3) 14 Pc. Wrench Sets 84B 1 2 Ton Chain Hoist 107A 1 20 Ton Air Jack 84C 1 2 Ton Chain Hoist 107B 1 20 Ton Air Jack 85A 1 (3) 22 Ton Hyd. Jacks 107C 1 20 Ton Air Jack 85B 1 (3) 22 Ton Hyd. Jacks 107D 1 20 Ton Air Jack 86A 1 Torch Set 107E 1 20 Ton Air Jack 86B 1 Torch Set 107F 1 20 Ton Air Jack 86C 1 Torch Set 108A 1 (2) 48" Frame Jacks 86D 1 Torch Set 108B 1 (2) 48" Frame Jacks 87A 1 3 Ton Jack Stands 109A 1 6 Hand Shovels 87B 1 3 Ton Jack Stands 109B 1 6 Hand Shovels 87C 1 3 Ton Jack Stands 109C 1 6 Hand Shovels 87D 1 3 Ton Jack Stands 109D 1 6 Hand Shovels 87E 1 3 Ton Jack Stands 109E 1 6 Hand Shovels Page 2 report 87F 1 3 Ton Jack Stands 109F 1 6 Hand Shovels 88A 1 6 Ton Jack Stands 110 1 Tool Box 88B 1 6 Ton Jack Stands 111A 1 Truck Winch 88C 1 6 Ton Jack Stands 111B 1 Truck Winch 88D 1 6 Ton Jack Stands 111C 1 Truck Winch 88E 1 6 Ton Jack Stands 112A 1 Electric Jack Hammer 88F 1 6 Ton Jack Stands 112B 1 Electric Jack Hammer 89A 1 45 Pc. Tap & Die Set 112C 1 Electric Jack Hammer 89B 1 45 Pc. Tap & Die Set 112D 1 Electric Jack Hammer 89C 1 45 Pc. Tap & Die Set 113 1 Gas Caddy 90 1 Hammer Chisel 114A 1 5 Ton Chain Hoist 91A 1 Chain w/Hooks 114B 1 5 Ton Chain Hoist 91B 1 Chain w/Hooks 115A 1 Large Wrench Set 91C 1 Chain w/Hooks 115B 1 Large Wrench Set 91D 1 Chain w/Hooks 116A 1 5/16" x 20' Chain 92A 1 (3) 4 Ton Hand Pullers 116B 1 5/16" x 20' Chain 92B 1 (3) 4 Ton Hand Pullers 116C 1 5/16" x 20' Chain 93A 1 (5) 2 Ton Hand Pullers 116D 1 5/16" x 20' Chain 93B 1 (5) 2 Ton Hand Pullers 116E 1 5/16" x 20' Chain 117A 1 14" Cut Off Machine 153 1 Misc. Hand Tools 117B 1 14" Cut Off Machine 154 1 2 Tool Boxes & Misc.Sockets 117C 1 14" Cut Off Machine 155 1 Big Hooks 118A 1 ATV Lift 156 1 1/2" Chains 118B 1 ATV Lift 157 1 3/8" Chains 118C 1 ATV Lift 158 1 3/8" Chains 118D 1 ATV Lift 159 1 2 Boxes Straps 119A 1 50' Air Hose Reel 160 1 Cement Mixer 119B 1 50' Air Hose Reel 160A 1 60 Ton Shop Press 119C 1 50' Air Hose Reel 161 1 SWEEPSTER Sweeper 119D 1 50' Air Hose Reel 162 1 SWEEPSTER Sweeper 119E 1 50' Air Hose Reel 163 1 JOHN DEERE 170 38" Mower 119F 1 50' Air Hose Reel w/Bagger, s/n M00170X028030 120A 1 Dolly 164 1 JOHN DEERE F935 60" Mower, 120B 1 Dolly diesel, s/n CH3029D085496 120C 1 Dolly 165 1 CUB CADET 50" Mower, w/Bagger, 120D 1 Dolly s/n FH661VA06912 120E 1 Dolly 166 1 AMPAC 33L2-IR Vib. Roller, 120F 1 Dolly s/n 33071800 120G 1 Dolly 167 1 HONDA G200 Stone Concrete 121 1 Air Compressor Float 122 1 Poly Tubing 300' 2 Pcs 168 1 HONDA G300 Bartell Concrete 123 1 2 Pcs. Canvas Tarps Float 124 1 BARRETT Battery Charger 169 1 WINCO Power Plant 125 1 Pellet Furnace w/Duct Work 170 1 3 Cylinder Power Plant, diesel Page 3 report 126 1 LP Gas Grill 171 1 ONAN Power Plant, Propane 127 1 Electric Chain Hoist 171A 1 TENNANT Sweeper 128 1 Brake Drum Lathe 172 1 7.00-12 Forklift Tires 129 1 Parts Washer 173 1 650-10 Forklift Tires 130 1 Brake Rotor Lathe 174 1 CLARK Forklift 131 1 Brake Drum Lathe 175 1 BREEZE ATV 132 1 MARVEL Band Saw 176 1 2004 POLARIS Sportsman 700, 133 1 Lathe w/Plow & Winch, 4x4, 134 1 Metal Shear s/n 083444 BILL OF SALE 135 1 Welder 177 1 2002 POLARIS Sportsman 400, 136 1 Wire Feed Welder 4x4, s/n 775907 137 1 Rotor Driving Unit CERTIFICATE OF ORIGIN 138 1 Metal Brake 178 1 KUBOTA RTV 900, 4x4, Diesel, 139 1 VECTRAX Lathe s/n 73968 140 1 Vacuum Hoses 179 1 1999 ARCTIC CAT 600 141 1 Jack Hammer Snowmobile, s/n 9924999 142 1 Ice Maker NY Transferrable Reg. 143 1 Large Floor Jack 180 1 2007 TRITON ATV Trailer, 144 1 Misc. Light Bulbs s/n 886783 145 1 EMPIRE Sand Blaster & Dust CERTIFICATE OF ORIGIN Collector (2 Pcs.) 181 1 Horse Drawn Scooper 146 1 Metal Band Saw 182 1 DURATECH 15' Aluminum Boat 147 1 Concrete Vibrator 183 1 Storage Platform Lift 148 1 Concrete Vibrator 184 1 BENWIL Car Lift 149 1 DELTA Radial Arm Saw 250 1 2002 DODGE Stratus, s/n 131144 150 1 Tool Box, Misc. Tools 251 1 2002 MERCURY Sable, s/n 650919 151 1 Chop Saw, 2 Circular Saws, 252 1 2000 DODGE Caravan, s/n 93040 Bench Grinder 253 1 2002 CHEV Astro Van, 152 1 3 Tool Boxes s/n 151453 254 1 2000 FORD F350XL Super Duty 277 1 1996 CHEV Cheyenne Pickup w/Plow, 4X4, Triton V10 , w/Plow, 4X4, s/n 241632 s/n B18102 (Stereo Face in Office) 255 1 2004 FORD Ranger Ext.
Load more

Recommended publications
  • Guide to Concrete Repair Second Edition
    ON r in the West August 2015 Guide to Concrete Repair Second Edition Prepared by: Kurt F. von Fay, Civil Engineer Concrete, Geotechnical, and Structural Laboratory U.S. Department of the Interior Bureau of Reclamation Technical Service Center August 2015 Mission Statements The U.S. Department of the Interior protects America’s natural resources and heritage, honors our cultures and tribal communities, and supplies the energy to power our future. The mission of the Bureau of Reclamation is to manage, develop, and protect water and related resources in an environmentally and economically sound manner in the interest of the American public. Acknowledgments Acknowledgment is due the original author of this guide, W. Glenn Smoak, for all his efforts to prepare the first edition. For this edition, many people were involved in conducting research and field work, which provided valuable information for this update, and their contributions and hard work are greatly appreciated. They include Kurt D. Mitchell, Richard Pepin, Gregg Day, Jim Bowen, Dr. Alexander Vaysburd, Dr. Benoit Bissonnette, Maxim Morency, Brandon Poos, Westin Joy, David (Warren) Starbuck, Dr. Matthew Klein, and John (Bret) Robertson. Dr. William F. Kepler obtained much of the funding to prepare this updated guide. Nancy Arthur worked extensively on reviewing and editing the guide specifications sections and was a great help making sure they said what I meant to say. Teri Manross deserves recognition for the numerous hours she put into reviewing, editing and formatting this Guide. The assistance of these and numerous others is gratefully acknowledged. Contents PART I: RECLAMATION'S METHODOLOGY FOR CONCRETE MAINTENANCE AND REPAIR Page A.
    [Show full text]
  • Depave Guide Replacing Impervious Parking Lot with Green Spaces
    a little less grey a little more green The Depave Guide replacing impervious parking lot with green spaces Depave a program of Cuyahoga River Restoration Content adapted from, and in partnership with, Depave of Portland, OR • depave.org Based on “How to Depave: A Guide to Freeing Your Soil” by Depave Adapted with permission, and with grateful acknowledgment to the Depave team in Portland, OR © 2017 Cuyahoga River Community Planning 1299 Superior Ave E, Cleveland, OH 44114 Made possible with a grant from the Ohio Environmental Education Fund Ohio Environmental Protection Agency GETTING FROM GREY TO GREEN WE’VE GOT WAY TOO MUCH PAVED IMPERVIOUS SURFACE. IT’S MAKING OUR CITIES FLOOD AND OUR STREAMS UNHEALTHY. Impervious surface that covers our roads, parking lots, driveways, and roofs is the most widespread obstacle to protecting water quality in rivers and streams. It causes flooding and has significant negative effects on the environment. Parking lots are a major problem, not just in urban areas but everywhere. Aside from increasing runoff volume, parking lots contribute nutrient and chemical contaminants from road salt, degraded asphalt, worn tire treads, automotive fluids, fertilizers, and herbicides. They also increase the heat island effect, making buildings nearby, and automobiles parking there, use more energy to cool down. As a typical example, 31% of the land in Cuyahoga County in Northeast Ohio is covered in impervious surface. Parking lots represent 14% of that total. The Center for Watershed Protection sets 25% impervious as the level above which serious damage is done to water quality. If we could convert half of that 14% to absorptive greenspace, we could reach the point where we can protect rather than degrade our water, air, and human health.
    [Show full text]
  • The Guide To
    The Guide to A PARKING LOTS TO PARADISE PRODUCTION Authors Hindi Iserhott Maren Murphy Maia Nativ Eric Rosewall Photography Eric Rosewall others where noted Design Maggie Gardner Eric Rosewall Copyright © 2009 by Depave 3rd Edition, 2013 - Updated August, 2015 The Guide to Depaving is made available under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. The Depave logo seen below is a registered trademark of Depave. The most recent version of The Guide is made available at depave.org/learn/how-to-depave Please contact us to inquire about permissions beyond the scope of this license. Depave: P. O. Box 12503, Portland, OR 97212 | [email protected] WELCOME There are a lot of things you can do to transform an over-paved place in your 1 PLANNING neighborhood into a greener and healthier space. We hope to inspire you Site Selection with this guide that explains the process of depaving and the possibilities for Site History & Soil Health Soil Testing & Infiltration regreening. Site Development Ideas Stormwater Management Depave promotes the removal of unnecessary pavement from urban areas to Community Gardens create community green spaces and mitigate stormwater runoff. Through Learning Gardens community partnerships and volunteer engagement, Depave strives to overcome Trees & Naturescaping the social and environmental impacts of pavement with the use of action-oriented Site Plans & Permits educational events, community stewardship, and advocacy to reconnect people with nature and inspire others. Depave is a nonprofit organization based in 2 BREAKING GROUND Portland, Oregon. Material Reuse & Disposal Surface Preparation & Tools Why Depave? Techniques & Safety Paved surfaces contribute to stormwater pollution, whereby rainwater carries toxic Event Considerations urban pollutants to local streams and rivers, greatly degrading water quality and riparian habitats.
    [Show full text]
  • ~ Coal Mining in Canada: a Historical and Comparative Overview
    ~ Coal Mining in Canada: A Historical and Comparative Overview Delphin A. Muise Robert G. McIntosh Transformation Series Collection Transformation "Transformation," an occasional paper series pub- La collection Transformation, publication en st~~rie du lished by the Collection and Research Branch of the Musee national des sciences et de la technologic parais- National Museum of Science and Technology, is intended sant irregulierement, a pour but de faire connaitre, le to make current research available as quickly and inex- plus vite possible et au moindre cout, les recherches en pensively as possible. The series presents original cours dans certains secteurs. Elle prend la forme de research on science and technology history and issues monographies ou de recueils de courtes etudes accep- in Canada through refereed monographs or collections tes par un comite d'experts et s'alignant sur le thenne cen- of shorter studies, consistent with the Corporate frame- tral de la Societe, v La transformation du CanadaLo . Elle work, "The Transformation of Canada," and curatorial presente les travaux de recherche originaux en histoire subject priorities in agricultural and forestry, communi- des sciences et de la technologic au Canada et, ques- cations and space, transportation, industry, physical tions connexes realises en fonction des priorites de la sciences and energy. Division de la conservation, dans les secteurs de: l'agri- The Transformation series provides access to research culture et des forets, des communications et de 1'cspace, undertaken by staff curators and researchers for develop- des transports, de 1'industrie, des sciences physiques ment of collections, exhibits and programs. Submissions et de 1'energie .
    [Show full text]
  • OHBA Safety Pages
    OHBA Safety Jack & Demo Hammer Safety Pneumatic / Electrical Jackhammers Pages When using a jackhammer: • Wear proper PPE: eye protection, steel-toed boots, hearing protection; and safety gloves. • Rotate workers, whenever possible, when jackhammering for extended periods of time. • Position the jackhammer as near as possible to the work location. Place the compressor as far as possible from the work area to reduce the level of noise. • Inspect the jackhammer and associated equipment regularly for defect or damage. Check if all components are complete, securely in place (or tightened) and in good condition. Make sure to do this, too, before every shift or start of operations. o Check air hoses for breaks, cracks, and worn or damaged couplings. o Ensure that the rating of the hose is sufficient for the job intended. o Inspect the electrical cord for frays, wear and other signs of damage. • Secure hose ends to prevent whipping if an accidental cut or break occurs • Workers must sling the electrical cord on their shoulder to prevent its accidental swerving which can cause electrocution. • Use the proper weight of the jackhammer for the job. Use a lighter jackhammer for the job as much as possible. • Use the proper point for the material to be broken. Remember to use rock point for rock, spade point for asphalt, and chisel point for concrete. Never use a broken or cracked point. • Lift the jackhammer properly by using the legs. This helps you avoid back strain or injury. • Position the bit where you wish to the start the cut, then widen your stance to an athletic position prior to pulling the trigger.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Alstom Turbine Decommissioning and Removal - Foundation & Underground Infrastructure Removal; : NREL Tracking No
    6/21/2018 U.S. DOE: Office of Energy Efficiency and Renewable Energy - Environmental Questionnaire RECIPIENT:NREL STATE: CO PROJECT TITLE Alstom Turbine Decommissioning and Removal - Foundation & Underground Infrastructure Removal; : NREL Tracking No. 18-009b Funding Opportunity Announcement Number Procurement Instrument Number NEPA Control Number CID Number DE-AC36-08GO28308 NREL-18-009b GO28308 Based on my review of the information concerning the proposed action, as NEPA Compliance Officer (authorized under DOE Order 451.1A), I have made the following determination: CX, EA, EIS APPENDIX AND NUMBER: Description: DOE/EA 1914 Final Site-Wide Environmental Assessment of the Department of Energy’s National Wind Technology (NREL NWTC) Center at the National Renewable Energy Laboratory Rationale for determination: The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) and General Electric/Alstom Power, Inc. are proposing to decommission the Alstom Eco100 wind turbine located at site 4.1 at the National Wind Technology Center (NWTC) in Jefferson County, Colorado. DOE and Alstom Power entered into a Cooperative Research and Development Agreement (CRADA) in 2010 to conduct certification testing on the company’s 3-MW ECO 100 wind turbine and to validate models of Alstom’s unique drivetrain concept. The turbine was installed at NREL’s National Wind Technology Center (NWTC) in October 2010 and engineers began certification testing in 2011. A NEPA Determination to install and operate the turbine was signed in July 2010. Research on the turbine has been completed and GE International (parent company of Alstom) has decided to remove it from the NWTC. Decommissioning would be completed in two phases.
    [Show full text]
  • 4.4.2 FRONT-END LOADERS Front-End Loaders Typically Are Tractor Powered and Operate on Tires
    Douglas D. Gransberg / Construction Equipment for Engineers, Estimators, and Owners 037X_C004 Final Proof page 84 5.5.2006 11:23pm 84 Construction Equipment for Engineers, Estimators, and Owners 2. How much dirt (bcy) can be moved in one production cycle? The quantity takeoff is in bcy so the lcy load must be converted to bcy. 2:98 lcy=1:23 lcy=bcy ¼ 2:42 bcy=production cycle 3. What is the cycle time for one production cycle? Haul time ¼ 2000=[(3:2 mph)(880=min=mph)] ¼ 0:87 min Backtrack time ¼ 2400=[(3:2 mph)(880=min=mph) ¼ 0:85 min Cycle time ¼ load þ haul þ backtrack þ reposition ¼ 0:08 min þ 0:87 min þ 0:85 min þ 0:06 min ¼ 1:86 min 4. What is the work hour productivity if the operator works 50 min per 60-min hour? Work hour productivity ¼ [(load volume(bcy) )(50 min)]=cycletime ¼ [(2:42 bcy=load)(50 min)]=1:86 min=cycle ¼ 65:05 bcy=work hour 5. How long will it take to move the 1200 bcy? 1200 bcy=65:05 bcy=h ¼ 18:45 h: Use 18:50 work hours 6. How much will it cost? $55=h þ $23=h ¼ $78=h  18:50 h ¼ $1443 7. What is the unit cost to perform the work? $ 1433=1200 bcy ¼ $1:203=bcy to move the dirt with the Case 750K bulldozer 4.4.2 FRONT-END LOADERS Front-end loaders typically are tractor powered and operate on tires. They are typically articulated and very maneuverable, making them ideal for constricted areas.
    [Show full text]
  • Hand and Power Tools
    HAND and POWER TOOLS U.S. Department of Labor Occupational Safety and Health Administration OSHA 3080 2002 (Revised) This informational booklet is intended to provide a generic, non-exhaustive overview of a particular standards-related topic. This publication does not itself alter or determine compliance responsibilities, which are set forth in OSHA standards themselves and the Occupational Safety and Health Act. Moreover, because interpretations and enforcement policy may change over time, for additional guidance on OSHA compliance requirements, the reader should consult current and administrative interpretations and decisions by the Occupational Safety and Health Review Commission and the courts. Material contained in this publication is in the public domain and may be reproduced, fully or partially, without permission of the Federal Government. Source credit is requested but not required. This information will be made available to sensory impaired individuals upon request. Voice phone: (202) 693-1999 For sale by the U.S. Government Printing Office Superintendent of Documents, Mail Stop: SSOP, Washington, DC 20402-9328 ISBN 0-16-049865-1 Hand and Power Tools U.S. Department of Labor Occupational Safety and Health Administration OSHA 3080 2002 (Revised) Contents iii What Is the Purpose of This Booklet? .................................... 1 What Are the Hazards of Hand Tools? ................................... 3 What Are the Dangers of Power Tools? ................................. 4 Guards..........................................................................
    [Show full text]
  • Ultrasonic/Sonic Jackhammer Advantages Include Low Noise, Low Vibration, and Low Average Power Demand
    Ultrasonic/Sonic Jackhammer Advantages include low noise, low vibration, and low average power demand. NASA’s Jet Propulsion Laboratory, Pasadena, California An ultrasonic/sonic jackhammer (USJ) the USJ would offer several advantages situations in which there is a need to is the latest in a series of related devices, the over conventional pneumatic jackham- cut through concrete or asphalt with- first of which were reported in “Ultra- mers, as discussed below. out damaging such embedded objects sonic/Sonic Drill/Corers With Integrated In the USJ (see figure) as in the previ- as pipes, cables, and reinforcing steel Sensors” (NPO-20856), NASA Tech Briefs, ously reported ultrasonic/sonic drill/ bars. Vol. 25, No. 1 (January 2003), page 38. corers (USDCs) and related devices, the In contrast, even a full-scale USJ would Each of these devices cuts into a brittle ma- actuator assembly includes a piezoelec- generate much less noise and much less terial by means of hammering and chisel- tric stack and a horn for mechanical am- back-propagating vibration. The full- ing actions of a tool bit excited with a com- plification of the piezoelectric displace- scale USJ would also demand less average bination of ultrasonic and sonic vibrations. ment. A cylindrical shank of a power. Moreover, on the basis of experi- A small-scale prototype of the USJ has been chisel-shaped tool bit is mounted on the ence with the USDCs, it is expected that demonstrated. A fully developed, full-scale lower end of the horn. A bobbin-like such relatively flexible materials as wood, version of the USJ would be used for cut- cylindrical mass is free to move axially plastics, metals, and human tissues will ting through concrete, rocks, hard asphalt, through a limited range between the not be damaged by brief contact with the and other materials to which conventional lower end of the horn and the upper end tool bit of the operating USJ.
    [Show full text]
  • Job Description CRUSHER OPERATOR
    Job Description CRUSHER OPERATOR Crusher Operator February 4, 2019 Position title: Crusher Operator Department: Public Works Employee: Supervisor, Crusher Reports to: (Day-to-day direction from Crusher Foreman) Position Summary Under the supervision of the Supervisor, Crusher, with day-to-day work direction from the Crusher Foreman, the Crusher Operator is a safety sensitive position and is responsible for working with the crushing team to operate the crushing plant, ensuring effective operations to maintain or exceed quality and production goals. The Crusher Operator is responsible for adhering to Health and Safety Legislation and the County of St. Paul safe work policies and procedures always, ensuring the protection and safety of self, co-workers, the public and environment. The duties, responsibilities, and scope of this position may, from time to time, be amended, altered, or changed by the County of St. Paul No. 19 (the County) acting reasonably to meet the business, community, and/or regulatory needs of the organization. Key Responsibilities Crusher Operator in Plant (85% summer; no winter operation) • Adjusting levers to regulate flow of materials to from conveyors, chutes, pumps, or storage bins. • Starting crusher and prodding, breaking, or discarding lumps to prevent plugging, using bar, sledgehammer, or jackhammer. • Adjusting equipment, such as screen and conveyors to control or vary size or grade of product, or to maintain uniform flow of materials. • Sieve testing gravel for quality. • Keeping records of material processed. • Operating plant, monitoring panel board or control board to control feeding, crushing, and sifting machinery in sand and gravel pits. • Observing gauge, dials, and operation of machinery to ensure conformance to processing specifications.
    [Show full text]
  • Tools and Machinery of the Granite Industry Donald D
    ©2013 The Early American Industries Association. May not be reprinted without permission. www.earlyamericanindustries.org The Chronicle of the Early American Industries Association, Inc. Vol. 59, No. 2 June 2006 The Early American Industries Contents Association President: Tools and Machinery of the Granite Industry Donald D. Rosebrook Executive Director: by Paul Wood -------------------------------------------------------------- 37 Elton W. Hall THE PURPOSE of the Associa- Machines for Making Bricks in America, 1800-1850 tion is to encourage the study by Michael Pulice ----------------------------------------------------------- 53 of and better understanding of early American industries in the home, in the shop, on American Bucksaws the farm, and on the sea; also by Graham Stubbs ---------------------------------------------------------- 59 to discover, identify, classify, preserve and exhibit obsolete tools, implements and mechani- Departments cal devices which were used in early America. Stanley Tools by Walter W. Jacob MEMBERSHIP in the EAIA The Advertising Signs of the Stanley Rule & Level Co.— is open to any person or orga- Script Logo Period (1910-1920) ------------------------------------------- 70 nization sharing its interests and purposes. For membership Book Review: Windsor-Chair Making in America, From Craft Shop to Consumer by information, write to Elton W. Hall, Executive Nancy Goyne Evans Director, 167 Bakerville Road, Reviewed by Elton W. Hall ------------------------------------------------- 75 South Dartmouth, MA 02748 or e-mail: [email protected]. Plane Chatter by J. M. Whelan An Unusual Iron Mounting ------------------------------------------------- 76 The Chronicle Editor: Patty MacLeish Editorial Board Katherine Boardman Covers John Carter Front: A bucksaw, patented in 1859 by James Haynes, and a nineteenth century Jay Gaynor Raymond V. Giordano saw-buck. Photograph by Graham Stubbs, who discusses American bucksaws Rabbit Goody in this issue beginning on page 59.
    [Show full text]