DOCSLIB.ORG

Prices Do Not Include Tax and Damage

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Prices Do Not Include Tax and Damage Wellsboro Equipment 25 Whitneyville Road Mansfield, PA 16933 (570) 724-6100 2018 RENTAL PRICE LIST **PRICES DO NOT INCLUDE TAX AND DAMAGE WAIVER** **ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE** **MANY ADDITIONAL ITEMS TO BE ADDED, IF YOU DON'T SEE SOMETHING YOU NEED, PLEASE CALL AND ASK!!** ITEM DESCRIPTION HALF DAY FULL DAY WEEKEND WEEK MONTH AIR COMPRESSOR & TOOLS 185 CFM AIR COMPRESSOR (SULLAIR OR INGERSOL RAND) $93.75 $125.00 $187.50 $375.00 $750.00 9.0 CFM GAS AIR COMPRESSOR $30.00 $40.00 $60.00 $160.00 $480.00 4.1 CFM ELECTRIC AIR COMPRESSOR $22.00 $30.00 $45.00 $100.00 $300.00 3/4" X 50' AIR HOSE $10.00 $18.00 $25.00 $30.00 $90.00 SMALL AIR HOSE $3.00 $3.00 $4.50 $12.00 $36.00 MARCO SANDBLASTER POT (INCLUDES HOOD) $45.00 $60.00 $90.00 $145.00 $375.00 AIR FRAMING NAILER $22.50 $30.00 $45.00 $90.00 $190.00 AIR ROOFING NAILER $22.50 $30.00 $45.00 $90.00 $190.00 FINISH NAILER $8.00 $12.00 $18.00 $60.00 $180.00 CONCRETE TOOLS CONCRETE SCREED (ELECTRIC) $19.00 $25.00 $37.50 $96.00 $196.00 12FT SCREED BOARD (FOR ELECTRIC SCREED) $8.00 $12.00 $18.00 $60.00 $180.00 14FT SCREED BOARD (FOR ELECTRIC SCREED) $8.00 $12.00 $18.00 $60.00 $180.00 16FT SCREED BOARD (FOR ELECTRIC SCREED) $8.00 $12.00 $18.00 $60.00 $180.00 18FT SCREED BOARD (FOR ELECTRIC SCREED) $8.00 $12.00 $18.00 $60.00 $180.00 20FT SCREED BOARD (FOR ELECTRIC SCREED) $8.00 $12.00 $18.00 $60.00 $180.00 CONCRETE SCREED (GAS) $37.00 $55.00 $82.50 $195.00 $390.00 5FT SCREED BOARD (FOR GAS SCREED) $8.00 $12.00 $18.00 $60.00 $180.00 8FT SCREED BOARD (FOR GAS SCREED) $8.00 $12.00 $18.00 $60.00 $180.00 10FT SCREED BOARD (FOR GAS SCREED) $8.00 $12.00 $18.00 $60.00 $180.00 12FT SCREED BOARD (FOR GAS SCREED) $8.00 $12.00 $18.00 $60.00 $180.00 14FT SCREED BOARD (FOR GAS SCREED) $8.00 $12.00 $18.00 $60.00 $180.00 16FT SCREED BOARD (FOR GAS SCREED) $8.00 $12.00 $18.00 $60.00 $180.00 60LB ELECTRIC JACKHAMMER $45.00 $60.00 $90.00 $200.00 $600.00 15LB AIR JACKHAMMER $25.00 $38.00 $62.00 $115.00 $345.00 60LB AIR JACKHAMMER $25.00 $40.00 $65.00 $122.00 $366.00 90LB AIR JACKHAMMER $35.00 $50.00 $75.00 $250.00 $750.00 MOIL POINT JACKHAMMER BIT $5.00 $7.50 $13.00 $22.00 $35.00 1IN JACKHAMMER BIT $5.00 $7.50 $13.00 $22.00 $35.00 3IN JACKHAMMER BIT $5.00 $7.50 $13.00 $22.00 $35.00 5IN JACKHAMMER BIT $5.00 $7.50 $13.00 $22.00 $35.00 PAD TAMPER JACKHAMMER BIT $5.00 $7.50 $13.00 $22.00 $35.00 CLAY SPADE JACKHAMMER BIT $5.00 $7.50 $13.00 $22.00 $35.00 ELECTRIC CEMENT MIXER $18.00 $25.00 $40.00 $125.00 $375.00 9 CU FT GAS CONCRETE MIXER $42.00 $55.00 $82.50 $168.00 $480.00 2 BAGGER MORTER MIXER $42.00 $55.00 $82.50 $168.00 $480.00 CONCRETE VIBRATOR $25.00 $35.00 $52.50 $98.00 $220.00 CONCRETE GRINDER $62.00 $90.00 $135.00 $353.00 $1,059.00 36" CONCRETE POWER TROWEL $42.00 $55.00 $82.50 $168.00 $480.00 **ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE** **MANY ADDITIONAL ITEMS TO BE ADDED, IF YOU DON'T SEE SOMETHING YOU NEED, PLEASE CALL AND ASK!!** ITEM DESCRIPTION HALF DAY FULL DAY WEEKEND WEEK MONTH CART FOR WACKER NEUSON CONCRETE SAW $20.00 $30.00 $45.00 $115.00 $300.00 WACKER NEUSON CONCRETE CUTOFF SAW $40.00 $60.00 $90.00 $180.00 $575.00 DIAMOND BLADE FOR CUTOFF SAWS $22.50 $30.00 $45.00 $150.00 $450.00 ELECTRIC BLOCK SAW $30.00 $40.00 $60.00 $160.00 $520.00 BRICK SPLITTER $15.00 $20.00 $30.00 $60.00 $120.00 HAND HELD BLOCK SPLITTER $12.00 $18.00 $30.00 $90.00 $270.00 REBAR BENDER / CUTTER $15.00 $18.00 $27.00 $36.00 $98.00 CONCRETE STAMPS (PRICE PER STAMP) $3.75 $5.00 $7.50 $25.00 $75.00 36" CONCRETE BULL FLOAT $10.00 $15.00 $22.50 $36.00 $72.00 48" CONCRETE BULL FLOAT $10.00 $15.00 $22.50 $36.00 $72.00 CONCRETE BULL FLOAT HANDLE (PRICE IS PER HANDLE) $2.00 $3.00 $4.50 $6.00 $12.00 48" CONCRETE POOL FLOAT $10.00 $15.00 $22.50 $36.00 $72.00 CONCRETE POOL FLOAT HANDLE (PRICE IS PER HANDLE) $2.00 $3.00 $4.50 $6.00 $12.00 DRILLS AND DRILL BITS ELECTRIC CORE DRILL (STAND UP UNIT) $42.00 $55.00 $82.50 $178.00 $534.00 GAS CORE DRILL, STIHL $35.00 $55.00 $82.50 $275.00 $825.00 CORE DRILL BIT 2" X 12" $35.00 $55.00 $82.50 $275.00 $825.00 CORE DRILL BIT 3" X 12" $35.00 $55.00 $82.50 $275.00 $825.00 CORE DRILL BIT 4" X 15" $41.25 $55.00 $82.50 $180.00 $540.00 CORE DRILL BIT 5" X 12" $45.00 $62.00 $93.00 $210.00 $630.00 CORE DRILL BIT 5" X 14" $45.00 $62.00 $93.00 $210.00 $630.00 CORE DRILL BIT 6" X 14" $52.00 $70.00 $105.00 $225.00 $675.00 CORE DRILL BIT 8" X 12" $58.00 $89.00 $133.50 $345.00 $1,035.00 DRILL, ROTARY HAMMER, HILTI $26.00 $52.50 $78.75 $126.00 $300.00 DEWALT D25762K HAMMER OR REGULAR DRILL $26.00 $52.50 $78.75 $126.00 $300.00 MAGNETIC DRILL $38.00 $50.00 $75.00 $200.00 $400.00 RIGHT ANGLE DRILL, MILWAUKEE $20.00 $40.00 $60.00 $120.00 $360.00 HAMMER OR REGULAR DRILL, MAKITA $20.00 $40.00 $60.00 $120.00 $360.00 3/4" - 1-7/8" HAMMER DRILL BIT $14.00 $28.00 $35.00 $50.00 $60.00 SDS MAX BIT, 1" CHISEL $5.00 $7.50 $13.00 $22.00 $35.00 SDS MAX BIT, 1" SCOOP $5.00 $7.50 $13.00 $22.00 $35.00 SDS MAX BIT 1" X 16" $5.00 $7.50 $13.00 $22.00 $35.00 SDS MAX BIT 1/2" X 10" $5.00 $7.50 $13.00 $22.00 $35.00 SDS PLUS BIT 3/4" X 16" $5.00 $7.50 $13.00 $22.00 $35.00 SDS PLUS BIT 3/4" X 10" $5.00 $7.50 $13.00 $22.00 $35.00 SDS PLUS BIT 5/8" X 10" $5.00 $7.50 $13.00 $22.00 $35.00 SDS PLUS BIT 1" X 8" $5.00 $7.50 $13.00 $22.00 $35.00 SDS PLUS BIT 3/8" X 4" $5.00 $7.50 $13.00 $22.00 $35.00 SPLINE BIT 1" X 32" $5.00 $7.50 $13.00 $22.00 $35.00 SPLINE BIT 1/2" X 23" $5.00 $7.50 $13.00 $22.00 $35.00 SPLINE BIT 1" X 18" $5.00 $7.50 $13.00 $22.00 $35.00 SPLINE BIT 1-1/2" X 18" $5.00 $7.50 $13.00 $22.00 $35.00 SPLINE BIT 1-1/4" X 18" $5.00 $7.50 $13.00 $22.00 $35.00 SPLINE BIT 1/2" X 16" $5.00 $7.50 $13.00 $22.00 $35.00 SPLINE BIT 7/8" X 12" $5.00 $7.50 $13.00 $22.00 $35.00 SPLINE BIT 3/4" X 12" $5.00 $7.50 $13.00 $22.00 $35.00 SPLINE BIT 5/8" X 12" $5.00 $7.50 $13.00 $22.00 $35.00 SPLINE BIT 3/8" X 6" $5.00 $7.50 $13.00 $22.00 $35.00 EARTH MOVING EQUIPMENT MINI EXCAVATOR, BOBCAT E32 (7200 LBS) $168.75 $225.00 $337.50 $1,125.00 $3,375.00 MINI EXCAVATOR, BOBCAT E42 (9200 LBS) $170.00 $250.00 $375.00 $1,250.00 $3,750.00 MINI EXCAVATOR IHI 55 V4F (12,000 LBS) $225.00 $300.00 $450.00 $1,200.00 $3,500.00 BOBCAT 12" MINI EXCAVATOR BUCKET $10.00 $15.00 $22.50 $75.00 $225.00 **ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE** **MANY ADDITIONAL ITEMS TO BE ADDED, IF YOU DON'T SEE SOMETHING YOU NEED, PLEASE CALL AND ASK!!** ITEM DESCRIPTION HALF DAY FULL DAY WEEKEND WEEK MONTH BOBCAT 18" MINI EXCAVATOR BUCKET $10.00 $15.00 $22.50 $75.00 $225.00 BOBCAT 24" MINI EXCAVATOR BUCKET $10.00 $15.00 $22.50 $75.00 $225.00 SKID STEER/MINI EXCAVATOR AUGER ATTACHMENT $25.00 $50.00 $250.00 $250.00 $750.00 MINI EXCAVATOR JACKHAMMER ATTACHMENT $131.25 $175.00 $262.50 $525.00 $1,575.00 SKID STEER, IHI AS34 (WHEELED UNIT) $165.00 $250.00 $375.00 $875.00 $2,100.00 SKID STEER T-590 (TRACKED UNIT) $185.00 $275.00 $412.50 $995.00 $2,895.00 SKID STEER PREPARATOR/ROCKHOUND $85.00 $120.00 $180.00 $600.00 $1,800.00 SKID STEER PALLET FORKS $20.00 $50.00 $75.00 $250.00 $750.00 SKID STEER TRENCHER $95.00 $125.00 $187.50 $625.00 $1,875.00 SKID STEER AUGER $25.00 $50.00 $75.00 $250.00 $750.00 SKID STEER AUGER BIT, 8" $48.00 $64.00 $96.00 $320.00 $960.00 SKID STEER AUGER BIT, 10" $48.00 $64.00 $96.00 $320.00 $960.00 SKID STEER AUGER BIT, 12" $48.00 $64.00 $96.00 $320.00 $960.00 SKID STEER AUGER BIT, 16" $48.00 $64.00 $96.00 $320.00 $960.00 SKID STEER AUGER BIT, 24" $48.00 $64.00 $96.00 $320.00 $960.00 SKID STEER AUGER BIT, 36" $48.00 $64.00 $96.00 $320.00 $960.00 LS TRACTOR XG3040 (FRONT BUCKET AND BACKHOE, 40HP) $135.00 $175.00 $265.00 $625.00 $1,750.00 STREET SWEEPER, DRIVABLE $130.00 $200.00 $350.00 $800.00 $2,400.00 1 OR 2 MAN POST HOLE AUGER $60.00 $90.00 $135.00 $240.00 $720.00 1 OR 2 MAN AUGER BIT, 6" $10.00 $10.00 $15.00 $50.00 $250.00 1 OR 2 MAN AUGER BIT, 8" $10.00 $10.00 $15.00 $50.00 $250.00 1 OR 2 MAN AUGER BIT, 10" $10.00 $10.00 $15.00 $50.00 $250.00 1 OR 2 MAN AUGER BIT, 12" $10.00 $10.00 $15.00 $50.00 $250.00 1 MAN ECHO POST HOLE DIGGER $5.00 $10.00 $18.00 $50.00 $150.00 JUMPING JACK $40.00 $55.00 $82.50 $220.00 $660.00 COMPACTOR PLATE $37.00 $50.00 $75.00 $176.00 $480.00 HAND TAMPER $8.00 $10.00 $15.00 $50.00 $150.00 FLOORING TOOLS $9.00 SQUAREBUFF FLOOR SANDER $45.00 $60.00 $90.00 $180.00 $520.00 DRUM SANDER 8" $45.00 $60.00 $90.00 $180.00 $520.00 EDGER SANDER, 7" $19.00 $26.00 $39.00 $72.00 $216.00 BUFFER/SANDER $18.00 $24.00 $36.00 $120.00 $360.00 EDCO DUST COLLECTION SYSTEM $50.00 $80.00 $115.00 $350.00 $925.00 LINOLEUM ROLLER $15.00 $15.00 $22.50 $40.00 $120.00 CERAMIC TILE SAW (ELECTRIC) $42.00 $60.00 $90.00 $185.00 $425.00 HAND HELD ELECTRIC TILE SAW $8.00 $12.00 $18.00 $60.00 $180.00 CERAMIC TILE SPLITTER $10.00 $15.00 $22.50 $30.00 $90.00 CARPET STRETCHER $15.00 $22.00 $35.00 $110.00 $330.00 CARPET IRON (SEAMER) $7.00 $14.00 $35.00 $70.00 $210.00 CARPET KNEE KICKER $8.00 $15.00 $25.00 $40.00 $120.00 PNEUMATIC TILE STRIPPER $22.50 $30.00 $45.00 $90.00 $270.00 ELECTRIC CARPET STAPLER $7.00 $10.00 $15.00 $50.00 $150.00 HARWOOD FLOORING NAILER (MANUAL) $19.00 $26.00 $39.00 $80.00 $175.00 HARDWOOD FLOORING NAILER (AIR) $24.00 $32.00 $48.00 $100.00 $290.00 HARDWOOD FLOORING STAPLER $15.00 $20.00 $30.00 $70.00 $165.00 HEATING PROPANE HEATER 80,000 BTU $11.00 $15.00 $22.50 $40.00 $80.00 KEROSENE/OFF ROAD HEATER 135,000 - 175,000 BTU $25.00 $35.00 $52.50 $175.00 $525.00 100LB PROPANE TANK (DOES NOT INCLUDE PROPANE) $10.00 $10.00 $15.00 $20.00 $60.00 LAWN AND GARDEN CHAINSAW (CS-400-18) $20.00 $35.00 $52.50 $100.00 $140.00 DOSKO STUMP GRINDER $112.00 $150.00 $225.00 $450.00 $1,350.00 **ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE** **MANY ADDITIONAL
Load more

Recommended publications
  • Guide to Concrete Repair Second Edition
    ON r in the West August 2015 Guide to Concrete Repair Second Edition Prepared by: Kurt F. von Fay, Civil Engineer Concrete, Geotechnical, and Structural Laboratory U.S. Department of the Interior Bureau of Reclamation Technical Service Center August 2015 Mission Statements The U.S. Department of the Interior protects America’s natural resources and heritage, honors our cultures and tribal communities, and supplies the energy to power our future. The mission of the Bureau of Reclamation is to manage, develop, and protect water and related resources in an environmentally and economically sound manner in the interest of the American public. Acknowledgments Acknowledgment is due the original author of this guide, W. Glenn Smoak, for all his efforts to prepare the first edition. For this edition, many people were involved in conducting research and field work, which provided valuable information for this update, and their contributions and hard work are greatly appreciated. They include Kurt D. Mitchell, Richard Pepin, Gregg Day, Jim Bowen, Dr. Alexander Vaysburd, Dr. Benoit Bissonnette, Maxim Morency, Brandon Poos, Westin Joy, David (Warren) Starbuck, Dr. Matthew Klein, and John (Bret) Robertson. Dr. William F. Kepler obtained much of the funding to prepare this updated guide. Nancy Arthur worked extensively on reviewing and editing the guide specifications sections and was a great help making sure they said what I meant to say. Teri Manross deserves recognition for the numerous hours she put into reviewing, editing and formatting this Guide. The assistance of these and numerous others is gratefully acknowledged. Contents PART I: RECLAMATION'S METHODOLOGY FOR CONCRETE MAINTENANCE AND REPAIR Page A.
    [Show full text]
  • Depave Guide Replacing Impervious Parking Lot with Green Spaces
    a little less grey a little more green The Depave Guide replacing impervious parking lot with green spaces Depave a program of Cuyahoga River Restoration Content adapted from, and in partnership with, Depave of Portland, OR • depave.org Based on “How to Depave: A Guide to Freeing Your Soil” by Depave Adapted with permission, and with grateful acknowledgment to the Depave team in Portland, OR © 2017 Cuyahoga River Community Planning 1299 Superior Ave E, Cleveland, OH 44114 Made possible with a grant from the Ohio Environmental Education Fund Ohio Environmental Protection Agency GETTING FROM GREY TO GREEN WE’VE GOT WAY TOO MUCH PAVED IMPERVIOUS SURFACE. IT’S MAKING OUR CITIES FLOOD AND OUR STREAMS UNHEALTHY. Impervious surface that covers our roads, parking lots, driveways, and roofs is the most widespread obstacle to protecting water quality in rivers and streams. It causes flooding and has significant negative effects on the environment. Parking lots are a major problem, not just in urban areas but everywhere. Aside from increasing runoff volume, parking lots contribute nutrient and chemical contaminants from road salt, degraded asphalt, worn tire treads, automotive fluids, fertilizers, and herbicides. They also increase the heat island effect, making buildings nearby, and automobiles parking there, use more energy to cool down. As a typical example, 31% of the land in Cuyahoga County in Northeast Ohio is covered in impervious surface. Parking lots represent 14% of that total. The Center for Watershed Protection sets 25% impervious as the level above which serious damage is done to water quality. If we could convert half of that 14% to absorptive greenspace, we could reach the point where we can protect rather than degrade our water, air, and human health.
    [Show full text]
  • Report OCTOBER 15, 2011 10/15/2011 Catalog Page: 1
    report OCTOBER_15,_2011 10/15/2011 Catalog Page: 1 Lot # Quan Description Lot # Quan Description ------ ---- ------------------------------ ------ ---- ------------------------------ 1 1 STIHL Chain Saw 52 1 Rims, Hub Caps & Wheel Chucks 2 1 STIHL 084AV Chain Saw 53 1 Lathe & Stand 3 1 STIHL MS290 Chain Saw 54 1 Power Hacksaw 4 1 Paint Sprayer 55 1 READING Tool Box 5 1 Blower 56 1 TRUKBOX 6 1 20 Ton Hyd Jack 57 1 TRUKBOX 7 1 20 Ton Hyd Jack 58 1 Window Door 8 1 Trimmer 59 1 Breaker 9 1 STIHL 032AV Chain Saw 60 1 Breaker 10 1 Rims & Transmission 61 1 Breaker 11 1 Grill 62 1 Bits 12 1 3 Chain Saws 63 1 Utility Sharpener 13 1 Ladder Rack 64 1 Floor Jack 14 1 Tool Boxes & Contents 65A 1 1 Ton Chain Hoist 15 1 Cutting Edge 65B 1 1 Ton Chain Hoist 16 1 Saw & Power Tools 65C 1 1 Ton Chain Hoist 17 1 Table Saw & Power Tools 65D 1 1 Ton Chain Hoist 18 1 Pumps 66A 1 Porta Power 19 1 Crate-Hooks 66B 1 Porta Power 20 1 MILWAULKEE Power Tools 66C 1 Porta Power 21 1 Compressor 67A 1 Socket Set 22 1 RYOBI Cordless Tool Set 67B 1 Socket Set 23 1 Sound System 67C 1 Socket Set 24 1 Jack 67D 1 Socket Set 25 1 Tonneau Cover 67E 1 Socket Set 26 1 Lot- Transits/ Tripods 68A 1 (3) 36" Bolt Cutters 27 1 Band Saw 68B 1 (3) 36" Bolt Cutters 28 1 Table Saw 69A 1 3 Boxes Padlocks 29 1 Torch Cart, Torches & Tanks 69B 1 3 Boxes Padlocks 30 1 Cement Chute 70 1 Box of Mixers 31 1 CRAFTSMAN Welder 71A 1 Cordless Drill 32 1 Pallet- Pumps 71B 1 Cordless Drill 33 1 Pallet- Misc.
    [Show full text]
  • The Guide To
    The Guide to A PARKING LOTS TO PARADISE PRODUCTION Authors Hindi Iserhott Maren Murphy Maia Nativ Eric Rosewall Photography Eric Rosewall others where noted Design Maggie Gardner Eric Rosewall Copyright © 2009 by Depave 3rd Edition, 2013 - Updated August, 2015 The Guide to Depaving is made available under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. The Depave logo seen below is a registered trademark of Depave. The most recent version of The Guide is made available at depave.org/learn/how-to-depave Please contact us to inquire about permissions beyond the scope of this license. Depave: P. O. Box 12503, Portland, OR 97212 | [email protected] WELCOME There are a lot of things you can do to transform an over-paved place in your 1 PLANNING neighborhood into a greener and healthier space. We hope to inspire you Site Selection with this guide that explains the process of depaving and the possibilities for Site History & Soil Health Soil Testing & Infiltration regreening. Site Development Ideas Stormwater Management Depave promotes the removal of unnecessary pavement from urban areas to Community Gardens create community green spaces and mitigate stormwater runoff. Through Learning Gardens community partnerships and volunteer engagement, Depave strives to overcome Trees & Naturescaping the social and environmental impacts of pavement with the use of action-oriented Site Plans & Permits educational events, community stewardship, and advocacy to reconnect people with nature and inspire others. Depave is a nonprofit organization based in 2 BREAKING GROUND Portland, Oregon. Material Reuse & Disposal Surface Preparation & Tools Why Depave? Techniques & Safety Paved surfaces contribute to stormwater pollution, whereby rainwater carries toxic Event Considerations urban pollutants to local streams and rivers, greatly degrading water quality and riparian habitats.
    [Show full text]
  • ~ Coal Mining in Canada: a Historical and Comparative Overview
    ~ Coal Mining in Canada: A Historical and Comparative Overview Delphin A. Muise Robert G. McIntosh Transformation Series Collection Transformation "Transformation," an occasional paper series pub- La collection Transformation, publication en st~~rie du lished by the Collection and Research Branch of the Musee national des sciences et de la technologic parais- National Museum of Science and Technology, is intended sant irregulierement, a pour but de faire connaitre, le to make current research available as quickly and inex- plus vite possible et au moindre cout, les recherches en pensively as possible. The series presents original cours dans certains secteurs. Elle prend la forme de research on science and technology history and issues monographies ou de recueils de courtes etudes accep- in Canada through refereed monographs or collections tes par un comite d'experts et s'alignant sur le thenne cen- of shorter studies, consistent with the Corporate frame- tral de la Societe, v La transformation du CanadaLo . Elle work, "The Transformation of Canada," and curatorial presente les travaux de recherche originaux en histoire subject priorities in agricultural and forestry, communi- des sciences et de la technologic au Canada et, ques- cations and space, transportation, industry, physical tions connexes realises en fonction des priorites de la sciences and energy. Division de la conservation, dans les secteurs de: l'agri- The Transformation series provides access to research culture et des forets, des communications et de 1'cspace, undertaken by staff curators and researchers for develop- des transports, de 1'industrie, des sciences physiques ment of collections, exhibits and programs. Submissions et de 1'energie .
    [Show full text]
  • OHBA Safety Pages
    OHBA Safety Jack & Demo Hammer Safety Pneumatic / Electrical Jackhammers Pages When using a jackhammer: • Wear proper PPE: eye protection, steel-toed boots, hearing protection; and safety gloves. • Rotate workers, whenever possible, when jackhammering for extended periods of time. • Position the jackhammer as near as possible to the work location. Place the compressor as far as possible from the work area to reduce the level of noise. • Inspect the jackhammer and associated equipment regularly for defect or damage. Check if all components are complete, securely in place (or tightened) and in good condition. Make sure to do this, too, before every shift or start of operations. o Check air hoses for breaks, cracks, and worn or damaged couplings. o Ensure that the rating of the hose is sufficient for the job intended. o Inspect the electrical cord for frays, wear and other signs of damage. • Secure hose ends to prevent whipping if an accidental cut or break occurs • Workers must sling the electrical cord on their shoulder to prevent its accidental swerving which can cause electrocution. • Use the proper weight of the jackhammer for the job. Use a lighter jackhammer for the job as much as possible. • Use the proper point for the material to be broken. Remember to use rock point for rock, spade point for asphalt, and chisel point for concrete. Never use a broken or cracked point. • Lift the jackhammer properly by using the legs. This helps you avoid back strain or injury. • Position the bit where you wish to the start the cut, then widen your stance to an athletic position prior to pulling the trigger.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Alstom Turbine Decommissioning and Removal - Foundation & Underground Infrastructure Removal; : NREL Tracking No
    6/21/2018 U.S. DOE: Office of Energy Efficiency and Renewable Energy - Environmental Questionnaire RECIPIENT:NREL STATE: CO PROJECT TITLE Alstom Turbine Decommissioning and Removal - Foundation & Underground Infrastructure Removal; : NREL Tracking No. 18-009b Funding Opportunity Announcement Number Procurement Instrument Number NEPA Control Number CID Number DE-AC36-08GO28308 NREL-18-009b GO28308 Based on my review of the information concerning the proposed action, as NEPA Compliance Officer (authorized under DOE Order 451.1A), I have made the following determination: CX, EA, EIS APPENDIX AND NUMBER: Description: DOE/EA 1914 Final Site-Wide Environmental Assessment of the Department of Energy’s National Wind Technology (NREL NWTC) Center at the National Renewable Energy Laboratory Rationale for determination: The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) and General Electric/Alstom Power, Inc. are proposing to decommission the Alstom Eco100 wind turbine located at site 4.1 at the National Wind Technology Center (NWTC) in Jefferson County, Colorado. DOE and Alstom Power entered into a Cooperative Research and Development Agreement (CRADA) in 2010 to conduct certification testing on the company’s 3-MW ECO 100 wind turbine and to validate models of Alstom’s unique drivetrain concept. The turbine was installed at NREL’s National Wind Technology Center (NWTC) in October 2010 and engineers began certification testing in 2011. A NEPA Determination to install and operate the turbine was signed in July 2010. Research on the turbine has been completed and GE International (parent company of Alstom) has decided to remove it from the NWTC. Decommissioning would be completed in two phases.
    [Show full text]
  • 4.4.2 FRONT-END LOADERS Front-End Loaders Typically Are Tractor Powered and Operate on Tires
    Douglas D. Gransberg / Construction Equipment for Engineers, Estimators, and Owners 037X_C004 Final Proof page 84 5.5.2006 11:23pm 84 Construction Equipment for Engineers, Estimators, and Owners 2. How much dirt (bcy) can be moved in one production cycle? The quantity takeoff is in bcy so the lcy load must be converted to bcy. 2:98 lcy=1:23 lcy=bcy ¼ 2:42 bcy=production cycle 3. What is the cycle time for one production cycle? Haul time ¼ 2000=[(3:2 mph)(880=min=mph)] ¼ 0:87 min Backtrack time ¼ 2400=[(3:2 mph)(880=min=mph) ¼ 0:85 min Cycle time ¼ load þ haul þ backtrack þ reposition ¼ 0:08 min þ 0:87 min þ 0:85 min þ 0:06 min ¼ 1:86 min 4. What is the work hour productivity if the operator works 50 min per 60-min hour? Work hour productivity ¼ [(load volume(bcy) )(50 min)]=cycletime ¼ [(2:42 bcy=load)(50 min)]=1:86 min=cycle ¼ 65:05 bcy=work hour 5. How long will it take to move the 1200 bcy? 1200 bcy=65:05 bcy=h ¼ 18:45 h: Use 18:50 work hours 6. How much will it cost? $55=h þ $23=h ¼ $78=h  18:50 h ¼ $1443 7. What is the unit cost to perform the work? $ 1433=1200 bcy ¼ $1:203=bcy to move the dirt with the Case 750K bulldozer 4.4.2 FRONT-END LOADERS Front-end loaders typically are tractor powered and operate on tires. They are typically articulated and very maneuverable, making them ideal for constricted areas.
    [Show full text]
  • Hand and Power Tools
    HAND and POWER TOOLS U.S. Department of Labor Occupational Safety and Health Administration OSHA 3080 2002 (Revised) This informational booklet is intended to provide a generic, non-exhaustive overview of a particular standards-related topic. This publication does not itself alter or determine compliance responsibilities, which are set forth in OSHA standards themselves and the Occupational Safety and Health Act. Moreover, because interpretations and enforcement policy may change over time, for additional guidance on OSHA compliance requirements, the reader should consult current and administrative interpretations and decisions by the Occupational Safety and Health Review Commission and the courts. Material contained in this publication is in the public domain and may be reproduced, fully or partially, without permission of the Federal Government. Source credit is requested but not required. This information will be made available to sensory impaired individuals upon request. Voice phone: (202) 693-1999 For sale by the U.S. Government Printing Office Superintendent of Documents, Mail Stop: SSOP, Washington, DC 20402-9328 ISBN 0-16-049865-1 Hand and Power Tools U.S. Department of Labor Occupational Safety and Health Administration OSHA 3080 2002 (Revised) Contents iii What Is the Purpose of This Booklet? .................................... 1 What Are the Hazards of Hand Tools? ................................... 3 What Are the Dangers of Power Tools? ................................. 4 Guards..........................................................................
    [Show full text]
  • Ultrasonic/Sonic Jackhammer Advantages Include Low Noise, Low Vibration, and Low Average Power Demand
    Ultrasonic/Sonic Jackhammer Advantages include low noise, low vibration, and low average power demand. NASA’s Jet Propulsion Laboratory, Pasadena, California An ultrasonic/sonic jackhammer (USJ) the USJ would offer several advantages situations in which there is a need to is the latest in a series of related devices, the over conventional pneumatic jackham- cut through concrete or asphalt with- first of which were reported in “Ultra- mers, as discussed below. out damaging such embedded objects sonic/Sonic Drill/Corers With Integrated In the USJ (see figure) as in the previ- as pipes, cables, and reinforcing steel Sensors” (NPO-20856), NASA Tech Briefs, ously reported ultrasonic/sonic drill/ bars. Vol. 25, No. 1 (January 2003), page 38. corers (USDCs) and related devices, the In contrast, even a full-scale USJ would Each of these devices cuts into a brittle ma- actuator assembly includes a piezoelec- generate much less noise and much less terial by means of hammering and chisel- tric stack and a horn for mechanical am- back-propagating vibration. The full- ing actions of a tool bit excited with a com- plification of the piezoelectric displace- scale USJ would also demand less average bination of ultrasonic and sonic vibrations. ment. A cylindrical shank of a power. Moreover, on the basis of experi- A small-scale prototype of the USJ has been chisel-shaped tool bit is mounted on the ence with the USDCs, it is expected that demonstrated. A fully developed, full-scale lower end of the horn. A bobbin-like such relatively flexible materials as wood, version of the USJ would be used for cut- cylindrical mass is free to move axially plastics, metals, and human tissues will ting through concrete, rocks, hard asphalt, through a limited range between the not be damaged by brief contact with the and other materials to which conventional lower end of the horn and the upper end tool bit of the operating USJ.
    [Show full text]
  • Job Description CRUSHER OPERATOR
    Job Description CRUSHER OPERATOR Crusher Operator February 4, 2019 Position title: Crusher Operator Department: Public Works Employee: Supervisor, Crusher Reports to: (Day-to-day direction from Crusher Foreman) Position Summary Under the supervision of the Supervisor, Crusher, with day-to-day work direction from the Crusher Foreman, the Crusher Operator is a safety sensitive position and is responsible for working with the crushing team to operate the crushing plant, ensuring effective operations to maintain or exceed quality and production goals. The Crusher Operator is responsible for adhering to Health and Safety Legislation and the County of St. Paul safe work policies and procedures always, ensuring the protection and safety of self, co-workers, the public and environment. The duties, responsibilities, and scope of this position may, from time to time, be amended, altered, or changed by the County of St. Paul No. 19 (the County) acting reasonably to meet the business, community, and/or regulatory needs of the organization. Key Responsibilities Crusher Operator in Plant (85% summer; no winter operation) • Adjusting levers to regulate flow of materials to from conveyors, chutes, pumps, or storage bins. • Starting crusher and prodding, breaking, or discarding lumps to prevent plugging, using bar, sledgehammer, or jackhammer. • Adjusting equipment, such as screen and conveyors to control or vary size or grade of product, or to maintain uniform flow of materials. • Sieve testing gravel for quality. • Keeping records of material processed. • Operating plant, monitoring panel board or control board to control feeding, crushing, and sifting machinery in sand and gravel pits. • Observing gauge, dials, and operation of machinery to ensure conformance to processing specifications.
    [Show full text]