Baggage Handling System Design Standard
Total Page:16
File Type:pdf, Size:1020Kb
(Uncontrolled when printed) MAS-GEN-010 Baggage Handling System Design Standard Document Number MAS-GEN-010 Baggage Handling System (BHS) Design Technical Standard Approver Head of Terminals and IOC, APAM Date 11/08/2020 Head of Utility and Facility Management, APAM Maintainer Christine Druce, Date 03/08/2020 Senior Development Manager, Baggage Revision 002 Final Approved Date 11/08/2020 Next Review Date June 2021 MAS-GEN-010 Baggage Handling System Design Australia Pacific Airports (Melbourne) Pty Ltd 1 of 81 (Uncontrolled when printed) MAS-GEN-010 DISCLAIMER This procedure has been developed by Australia Pacific Airports (Melbourne) Pty Ltd (Melbourne Airport) for use in the construction and maintenance of works at Melbourne Airport in order to: Provide guidance to persons planning and performing those works as to airport specific requirements; and Promote consistency in utilities infrastructure across the airport generally. While Melbourne Airport expects users to comply with this procedure, users should be cognisant that in some circumstances a higher standard than the minimum set out in this procedure may be warranted. In particular, users are also required to: Exercise their professional judgement and due diligence as to whether this procedure is appropriate to the particular circumstances; Bring to the task their knowledge of other relevant industry standards and practices that should also apply; and Request from Melbourne Airport, authority to deviate from this procedure, and advise why such deviation is appropriate. The use of the information contained in this Standard is at the user’s sole risk. Melbourne Airport, its officers, employees and agents: Make no representations, express or implied, as to the accuracy of the information contained in this procedure; Accept no liability for any use of the information contained in this procedure or reliance placed on it; and Make no representations, either express or implied, as to the suitability of the information contained in this procedure for any particular purpose. Melbourne Airport does not endorse, or in any respect warrant, any third-party products or services by virtue of any information, material or content referred to, included in, or accessible from this procedure. Please note that this Standard may be updated from time to time without notice and shall be subject to Periodic Review. Users are required to check they are referring to the most recent version. Copyright in this document belongs to Melbourne Airport. MAS-GEN-010 Baggage Handling System Design Australia Pacific Airports (Melbourne) Pty Ltd 2 of 81 (Uncontrolled when printed) MAS-GEN-010 CONTENTS 1. Overview .................................................................................................................................................... 9 1.1. Purpose ........................................................................................................................................... 9 1.2. Scope .............................................................................................................................................. 9 1.3. Mandatory and non-mandatory requirements ........................................................................... 9 1.4. Limits of standard .......................................................................................................................... 9 1.5. Deviation from standard ............................................................................................................. 10 1.6. References ................................................................................................................................... 10 1.7. Required Melbourne Airport Permits and Works authorisation / procedures ..................... 12 1.8. Historical issues and resolutions ............................................................................................... 12 2. Operational Requirements .................................................................................................................... 13 3. System Design ........................................................................................................................................ 14 3.1. System Design General .............................................................................................................. 14 3.2. System Availability ...................................................................................................................... 14 3.3. Transport Parameters ................................................................................................................. 15 4. Bag Dimensions ...................................................................................................................................... 17 4.1. All Terminals................................................................................................................................. 17 4.2. Oversized Baggage - Terminal 2 Only ..................................................................................... 18 5. Check in ................................................................................................................................................... 19 5.1. Both Operator Serviced Check-in and Automated Self-Service Bag Drop (SSBD) Stations ......................................................................................................................................... 19 5.2. Operator Serviced Check-in Stations ....................................................................................... 20 5.3. Automated Self-Service Bag Drop (SSBD) Stations .............................................................. 21 5.4. Intrusion Detection ...................................................................................................................... 22 5.5. Check-in Collector belt ................................................................................................................ 22 6. Security Processing ................................................................................................................................ 25 6.1. Processing Steps ......................................................................................................................... 25 6.2. Baggage Security Processing ................................................................................................... 25 6.3. Manual Inspection Area .............................................................................................................. 27 6.4. Baggage Security Ejection ......................................................................................................... 27 7. Sortation ................................................................................................................................................... 28 7.1. Sortation General ........................................................................................................................ 28 7.2. Batch Build ................................................................................................................................... 28 8. Storage Systems .................................................................................................................................... 30 8.1. Storage General .......................................................................................................................... 30 8.2. Lane Based Bag Storage ........................................................................................................... 30 8.3. AS/RS Based Bag Storage ........................................................................................................ 30 9. Baggage make-up areas ....................................................................................................................... 31 MAS-GEN-010 Baggage Handling System Design Australia Pacific Airports (Melbourne) Pty Ltd 3 of 81 (Uncontrolled when printed) MAS-GEN-010 9.1. Make-up Carousels ..................................................................................................................... 31 9.2. Make-up Laterals ......................................................................................................................... 32 9.3. Plinths ............................................................................................................................................ 33 9.4. Make-up Speed Loaders ............................................................................................................ 34 9.5. Clearance Heights ....................................................................................................................... 34 9.6. Ball Deck / container storage areas .......................................................................................... 35 9.7. Make Up Workstation units ........................................................................................................ 36 9.8. Vehicle operating areas .............................................................................................................. 37 9.9. Separation of people from plant & vehicles ............................................................................. 37 10. Bag Reclaim Areas ................................................................................................................................. 39 11. Equipment ...............................................................................................................................................