555698 Project Mc2 UV Nail Maker

SAFE BATTERY USAGE 8+ YEARS • Use alkaline batteries for best performance and longer life. • Use only the battery type recommended for the unit. • Batteries should be replaced only by an adult. UV NAIL MAKER • Insert batteries with the correct polarity ( + and – ). GELS CONFORM TO ASTM D4236 • Do not mix old and new batteries. SKU: 555698 ADULT SUPERVISION REQUIRED • Do not mix alkaline, standard (carbon-zinc), or rechargeable(nickel-cadmium) batteries. • Do not short-circuit batteries. CONTENTS • When not used for an extended time, remove batteries to prevent possible leakage and damage to the unit. A. UV Nail Maker • Do not mix rechargeable and non-rechargeable batteries. B. 2 UV Gel Polishes C. Nail Glitter • Rechargeable batteries are to be removed from the toy before charging. A. B. C. • Rechargeable batteries are to be recharged only under adult supervision. D. Nail Confetti • Do not recharge non-rechargeable batteries. E. 2 Nail Design Wheel Molds • Exhausted batteries are to be removed from the toy. F. Nail Design Wheel Top • Do not dispose of batteries in re as they may leak or explode. G. 2 Design Tips D. H. Tweezer Tool I. Mixing Tool J. 4 Nail Adhesive Sheets 2 1 2 E. F. G. I. J. H. Download our free iOS apps: Follow us: Watch on: Illustrations are for reference only. Styles may vary from actual contents. Lab Grab 2 BATTERY INSTALLATION Kids, ask your parents to download the Project Mc ™ apps, available on iOS devices through the app store : • Click on the App Store icon on your iOS device. Before beginning, an adult must install fresh alkaline batteries. Here’s how: • Click “Search” on your mobile device and type in “Project Mc2” 1. Using a Phillips screwdriver (not included), remove the screw and battery compartment cover • Once the correct app names come up on the screen, tap on the word “get.” located on the back of the UV nail maker. • You may be asked for your Apple ID. If so, enter your ID or follow the instructions on screen to get one. • Once your ID is accepted, watch the download status until the downloads are complete. 2. Install three (3) fresh 1.5V AAA (LR03) alkaline batteries (not included) making sure the (+) • The application icons should appear on your device. Tap the icon to activate the apps. and (-) ends face the proper direction as indicated inside the battery compartment. 3. Replace the compartment cover and tighten the screw. 2 The Project Mc ™ apps require iOS 6.1 or later. Compatible with iPod Touch® 4, iPhone® 4 and iPad® 2 or later versions. Data rates may apply. ‘Let’s care for the environment!’ The wheelie bin symbol indicates that the product must not be disposed of with other household waste. Please use designated collection points or recycling facilities when disposing of the item. Do not treat old batteries as 3x AAA Batteries household waste. Take them to a designated recycling facility. 1.5V AAA/LR03 Please keep this manual as it contains important information. www.projectmc2.com 1.5V AAA/LR03 © 2018 MGA Entertainment, Inc. 2 1.5V AAA/LR03 PROJECT MC ™ is a trademark of MGA in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging appearance are the property of MGA. Visit 16300 Roscoe Blvd. .com to register your product 0818-0-E Van Nuys, CA 91406 U.S.A. and to enter our sweepstakes (800) 222-4685 (No purchase necessary) 4 Printed in China 1 QUICK START 4 SET IMPORTANT: Protect the play area before use. • Before beginning, turn on the nail maker by pressing in the button on the side. 2 PREPARE GEL POLISH • Insert the combined wheels into the nail maker. 1 1 Only insert the section that is lled with gel. • Unscrew the top. The UV light will turn on. • Remove and keep the protective plug. • Once the UV light turns o (after 90 seconds), remove • Then, twist on a design tip. the wheels. • Replace the protective plug and top when not in use. Note: The nail maker will go to sleep after the UV light turns o. Insert the wheels to activate the light. When not in use, press the button again to turn o. 2 GEL Press once to turn on. • Squeeze the gel into the mold in the nail wheel marked with a 2. Only ll 5 or 6 molds at a time, making sure to ll two-thirds of the way. Fill the molds in a row. 5 WEAR • Pour glitter over the gel or use the tweezer tool to add the confetti. • Use your thumb and index nger to snap apart the wheels. Then, with TIP: Use the mixing tool to pop • Use the mixing tool to mix the glitter or confetti into the gel. any bubbles in the gel. some force remove the top wheel (1). 2 2 • Peel o the nail lm from the wheel mold (2). Then, remove the nails 2 2 2 from the lm. • Peel o a nail adhesive and place it on your nail. Repeat for all nails. • Then, peel o the top layers of the adhesive stickers and discard. 1 • Place the nails over the adhesives to secure them to your nails. 2 FREESTYLE DESIGNS Use both gel colors to make multi-colored nails. • Fill a portion of the mold with one gel color, making sure to ll two-thirds of the way. Leave room to add another color. • Use the other color to ll another portion of the mold. • Add glitter or confetti and mix with the mixing tool for a sparkly design! 2 2 2 6 CLEAN • Clean the design tips with a wet wipe (not included) while the gel is still wet. • Collect unused glitter or confetti and insert it back into the containers. IMPORTANT INFORMATION • Keep away from eyes. Use in a well-ventilated area. Do not eat or drink while handling this product. • Avoid contact with skin before the gel is completely dry. Wash hands thoroughly before and after use. • 1 • Avoid looking directly into the UV light while the nail maker is activated. • Only apply gel and nail decorations to the mold wheel. Do not apply directly to your own nails. 3 COMBINE WHEELS • Tightly replace the top on the gel bottles when storing to prevent spillage. Only apply adhesives to your nails, as they may not be removed from all surfaces. • Attach the top wheel (1) to the bottom wheel mold (2). TIP: The nails on the top wheel (1) should • • Align the wheels so the tab on the top wheel (1) be bulging out and inserted into the • Gel may not be completely removed from all surfaces. wheel mold (2) for a perfect t. • Color transfer may occur. is inserted into the slot on the wheel mold (2). • Keep long hair and loose clothing away from the gel. • Once it is aligned, snap in place by pushing down • This gel is not edible. with your thumbs. Snap the middle and work your • Only use the gel provided in this kit with the nail maker. • Do not mix gel with substance not provided in this kit. way outwards around the wheels. 1 1 • Make sure the wheels are tted tightly to avoid 2 • Only insert the wheels into the nail maker. Use only as directed in these instructions. openings or spaces in between the wheels. • 2 • If irritation occurs, discontinue use. Seek medical attention if necessary. Slot • The nail maker will go to sleep after the 90 seconds has ended. Insert the wheels to wake it up. 2 • Press the button on the side of the nail maker once to turn o after use to conserve battery. • If gel does not fully cure or if the nail maker is not working as it should, replace the batteries. 3.

Load more