Depth Micrometer SERIES 329, 129 — Interchangeable Rod Type Technical Data Accuracy: ±3µm/±.00015” for micrometer head feed FEATURES (excluding quantizing error for digital models) • ø4mm interchangeable rods, with lapped • Ratchet stop provides constant force. ±(2+L/75)µm for interchangeable rod, L = Max. measuring length (mm) measuring end, provide a wide measuring • Measuring rod lock. ±[.0001+.00005 (R/3)]” range in 25mm increments. • SPC output (Series 329). R = Max. measuring length (inch) Fraction rounded up Resolution*: 0.001mm or .00005"/0.001mm (.0001”/0.001mm: 329-351-10) Graduation**: 0.01mm or .001” Flatness of reference face: 1.3µm (.00005”) for 63.5mm (2.5”) width base, 2µm (.0001”) for 101.6mm (4”) width base Flatness of measuring rod face: 0.3µm Parallelism between reference face and measuring rod face: (4+L/50)µm, L = Max. measuring length (mm) 329-250-10 [.00016+.00004 (R/2)]” ,R = Max. measuring length (inch) Fraction rounded up Measuring rod diameter: ø4mm Display*: LCD Battery*: SR44 (1 pc.), 938882 Battery life*: Approx. 1.2 years under normal use 129-110 *Digital models **Analog models SPECIFICATIONS Functions of Digital Model Metric Digital model Inch/Metric Digital model 2-point Preset, Zero-setting, Data hold, Automatic power Range Order No. Base No. of rods Range Order No. Base No. of rods ON/OFF, Data output, Preset inch/mm conversion (inch/mm 0 - 150mm 329-250-10 101.6 x 16mm 6 0 - 6” 329-350-10 4” x .63” 6 models) Function lock Alarm: Low voltage, Counting value composition error 0 - 300mm 329-251-10 101.6 x 16mm 12 0 - 12” 329-351-10 4” x .63” 12 Metric Inch Optional Accessories for Digital Model 05CZA662: SPC cable with data switch (1m) Range Order No. Base No. of rods Range Order No. Base No. of rods 05CZA663: SPC cable with data switch (2m) 0 - 25mm 129-154 63.5 x 16mm 0 - 2” 129-129 4” x .63” 2 02AZD790B: SPC cable for U-WAVE w/ data switch (160mm) 0 - 25mm 129-155 101.6 x 16mm 0 - 3” 129-126 2.5” x .63” 3 0 - 50mm 129-109 63.5 x 16mm 2 0 - 3” 129-130 4” x .63” 3 0 - 50mm 129-113 101.6 x 16mm 2 0 - 4” 129-127 2.5” x .63” 4 0 - 75mm 129-110 63.5 x 16mm 3 0 - 4” 129-131 4” x .63” 4 0 - 75mm 129-114 101.6 x 16mm 3 0 - 6” 129-128 2.5” x .63” 6 0 - 100mm 129-111 63.5 x 16mm 4 0 - 6” 129-132 4” x .63” 6 0 - 100mm 129-115 101.6 x 16mm 4 0 - 12” 129-149 2.5” x .63” 12 0 - 150mm 129-112 63.5 x 16mm 6 0 - 12” 129-150 4” x .63” 12 0 - 150mm 129-116 101.6 x 16mm 6 0 - 300mm 129-152 63.5 x 16mm 12 0 - 300mm 129-153 101.6 x 16mm 12 D Interchangeable rod (Optional Accessories)

L

Range 0 - 25mm 25 - 50mm 50 - 75mm 75 - 100mm 100 - 125mm 125 - 150mm 150 - 175mm 175 - 200mm 200 - 225mm 225 - 250mm 250 - 275mm 275 - 300mm For digital Order No. 983501 983503 983505 983507 983509 983511 983525 983527 983529 983531 983533 983535 model L 104mm 129mm 154mm 179mm 204mm 229mm 254mm 279mm 304mm 329mm 354mm 379mm For analog Order No. 983505 983507 983509 983511 983525 983527 983529 983531 983533 983535 981781 981782 model L 154mm 179mm 204mm 229mm 254mm 279mm 304mm 329mm 354mm 379mm 404mm 429mm

Range 0 - 1” 1 - 2” 2 - 3” 3 - 4” 4 - 5” 5 - 6” 6 - 7” 7 - 8” 8 - 9” 9 - 10” 10 - 11” 11 - 12” For digital Order No. 983502 983504 983506 983508 983510 983512 983526 983528 983530 983532 983534 983536 model L 104.3mm 129.7mm 155.1mm 180.5mm 205.9mm 231.3mm 256.7mm 282.1mm 307.5mm 332.9mm 358.3mm 383.7mm For analog Order No. 983506 983508 983510 983512 983526 983528 983530 983532 983534 983536 981783 981784 model L 155.1mm 180.5mm 205.9mm 231.3mm 256.7mm 282.1mm 307.5mm 332.9mm 358.3mm 383.7mm 409.1mm 434.5mm

DIMENSIONS

Unit: mm 16 16

Range 18 3 65.4 17 Range 18 3.5 47.2 2.3 3 60.9 17 ） 63.5 101.6 （ ø4 ø 4 101.6 ø 18.3 ø 18.3 Digital model Analog model

D-48 Depth Micrometer SERIES 128

FEATURES Technical Data • ø4mm measuring spindle. • Carbide-tipped measuring spindle model is Accuracy: ±3µm (±.00015”) for micrometer head feed • Measuring spindle lock. available. Graduation: 0.01mm or .001” Flatness of reference face: 1.3µm (.00005”) for 63.5mm • Ratchet stop provides constant force. (2.5”) width base, 2µm (.00008”) for 101.6mm (4”) width base Flatness of measuring rod face: 0.3µm

128-101 128-102

SPECIFICATIONS Metric Inch Range Order No. Base Range Order No. Base 0 - 25mm 128-101 63.5 x 16mm 0 - 1” 128-105 2.5” x .63” 0 - 25mm 128-103* 63.5 x 16mm 0 - 1” 128-106 4” x .63” 0 - 25mm 128-102 101.6 x 16mm 0 - 25mm 128-104* 101.6 x 16mm *with carbide-tipped measuring spindle

Depth Micro Checker SERIES 515

FEATURES • The Depth Micro Checker is designed to check and help set the range-end points of a depth micrometer. (Refer to page VIII for details.)

515-570 515-571 D Technical Data Block pitch accuracy: ±(1+L/150)µm, L = Length to check (mm) SPECIFICATIONS Anvil block accuracy: ±0.5µm Metric Range Order No. Reference checking lengths available 0 - 150mm 515-570 25, 50, 75, 100, 125, 150mm 0 - 300mm 515-571 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300mm

Inch Range Order No. Reference checking lengths available 0 - 6” 515-575 1”, 2”, 3”, 4”, 5”, 6”

DIMENSIONS

Unit: mm 515-571 25 50 75 100 125 150 175 200

515-570 225 250 9 275 345 300 25 16 50 9 75 100 125 150 180

72 92 92

D-49 ABSOLUTE Digimatic Depth Gage SERIES 571

FEATURES • The ABSOLUTE Digimatic Depth Gage • Base and measuring faces are hardened keeps track of the origin point (once set) and micro-lapped. for the entire life of the battery. • Optional wider extension bases are available. (up to 450mm range models) • SPC data output. (Refer to page VIII for details.)

(Refer to page VIII for details.)

0 2 0 0112074 571-251-10

571-201-20 Technical Data Accuracy: ±0.02mm (≤200mm), ±0.03mm (≤300mm) ±0.05mm (≤600mm), ±0.06mm (≤750mm), ±0.07mm (≤1000mm) (excluding quantizing error) SPECIFICATIONS Resolution: 0.01mm or .0005"/0.01mm Repeatability: 0.01mm Metric Inch/Metric Display: LCD Range Order No. Base (W x T) Range Order No. Base (W x T) Scale type: ABSOLUTE electrostatic 0 - 150mm 571-201-20 / 571-251-10* 100 x 6mm 0 - 6” 571-211-20 / 571-261-10* 3.93” x .23” (electromagnetic)* type linear encoder Max. response speed: Unlimited 0 - 200mm 571-202-20 / 571-252-10* 100 x 6mm 0 - 8” 571-212-20 / 571-262-10* 3.93” x .23” Battery: SR44 (1 pc.), 938882 0 - 300mm 571-203-20 / 571-253-10* 100 x 6 (6.3)mm 0 - 12” 571-213-10 / 571-263-10* 3.93” x .23” Battery life: Approx. 20,000 hours [3 years (1 year: 300mm / 0 - 450mm 571-204-10 250 x 10mm 0 - 18” 571-214-10 9.8” x .39” 12” models)]* under normal use Dust/Water protection level: IP67* 0 - 600mm 571-205-10 250 x 10mm 0 - 24” 571-215-10 9.8” x .39” *Coolant Proof models 0 - 750mm 571-206-10 250 x 10mm 0 - 30” 571-216-10 9.8” x .39” 0 - 1000mm 571-207-10 250 x 10mm 0 - 40” 571-217-10 9.8” x .39” Functions D Origin-set, Zero-setting, Automatic power on/off, Data *IP67 Coolant Proof model *IP67 Coolant Proof model output, inch/mm conversion (inch/mm models) Alarm: Low voltage, Counting value composition error DIMENSIONS Optional Accessories Unit: mm 959143: Data hold unit 959149: SPC cable with data switch (1m) Range L Base thickness 959150: SPC cable with data switch (2m) L 0 - 150mm 237 6 02AZD790C: SPC cable for U-WAVE w/ data switch (160mm) 0 - 200mm 287 6 05CZA624: SPC cable with data switch (1m)* (86.7) 0 - 300mm 403 (404) 6 (6.3) 05CZA625: SPC cable with data switch (2m)* 02AZD790A: SPC cable for U-WAVE w/ data switch (160mm)* 0 - 450mm 635 10 ––––––: Extension base (see page D-55.)

(20) 0 - 600mm 785 10 *For Coolant Proof models 5 0 - 750mm 935 10 100 70 571-253-10 0 - 1000mm 1200 10

2 – ø5 571-263-10 ( ): Coolant Proof models 7 4-ø9 L (27.5) Measurement data output 73.5 13 function is available with a 2-ø5 Over 300mm 65 water-resistant SPC cable. range models 20 65 20 70 16 8 100 5 250 33 (41.2)

Up to 300mm range models 65 7 ( ): Coolant Proof models 10 27.5

D-50 Vernier Depth Gage SERIES 527

FEATURES • Base and measuring faces are hardened • Made of hardened stainless steel. and micro-lapped. • Optional wider extension bases are available. (up to 450mm range models)

Technical Data 527-201 Accuracy: Refer to the list of specifications. Graduation: 0.05mm, 0.02mm or .001” Optional Accessories ––––––: Extension base (see page D-55.)

527-101

Fine adjustment SPECIFICATIONS Metric Range Order No. Vernier reading Accuracy Base (W x T) Remarks 0 - 150mm 527-201 0.05mm ±0.05mm 100 x 6.5mm — 0 - 150mm 527-121 0.02mm ±0.03mm 100 x 6.5mm — 0 - 150mm 527-101 0.02mm ±0.03mm 100 x 6.5mm with fine adjustment 0 - 200mm 527-202 0.05mm ±0.05mm 100 x 6.5mm — 0 - 200mm 527-122 0.02mm ±0.03mm 100 x 6.5mm — 0 - 200mm 527-102 0.02mm ±0.03mm 100 x 6.5mm with fine adjustment 0 - 300mm 527-203 0.05mm ±0.08mm 100 x 6.5mm — 0 - 300mm 527-123 0.02mm ±0.04mm 100 x 6.5mm — 0 - 300mm 527-103 0.02mm ±0.04mm 100 x 6.5mm with fine adjustment 0 - 600mm 527-204 0.05mm ±0.10mm 250 x 10mm — 0 - 600mm 527-104 0.02mm ±0.05mm 250 x 10mm with fine adjustment 0 - 1000mm 527-205 0.05mm ±0.15mm 250 x 10mm — 0 - 1000mm 527-105 0.02mm ±0.07mm 250 x 10mm with fine adjustment

Inch Range Order No. Vernier reading Accuracy Base (W x T) Remarks 0 - 6” 527-111 .001” ±.001” 3.93” x .25” with fine adjustment D 0 - 8” 527-112 .001” ±.001” 3.93” x .25” with fine adjustment 0 - 12” 527-113 .001” ±.0015” 9.8” x .39” with fine adjustment 0 - 24” 527-114 .001” ±.002” 9.8” x .39” with fine adjustment 0 - 40” 527-115 .001” ±.003” 9.8” x .39” with fine adjustment

DIMENSIONS

10 Unit: mm 25 7 13 2-ø5 ø9 Up to 300mm range models 27.5 70 11 16 100 4

65 70 20 L 34.5 65 8 250 30 20

110 Range L

65 0 - 150mm 260 0 - 200mm 310 0 - 300mm 410 Over 300mm range models 0 - 600mm 800 27.5 L 0 - 1000mm 1200

D-51 Depth Gage SERIES 527, 571 — Hook End Type

FEATURES • The end of the main scale is hook- • Fine-adjustment models are available. shaped to allow depth and thickness • Optional wider extension bases are measurements of a projected portion or available. lip in a hole, in addition to standard depth • SPC output (Series 571). measurement. (Refer to the VIII for details.)

(Refer to page VIII for details.)

0 2 0 0112074 571-254-10 Technical Data Accuracy: Refer to the list of specifications. (excluding quantizing error for digital models) Resolution*: 0.01mm or .0005"/0.01mm Graduation**: 0.05mm or 0.02mm 527-401 Repeatability*: 0.01mm Display*: LCD Scale type*: ABSOLUTE electromagnetic linear encoder Max. response speed*: Unlimited Battery*: SR44 (1 pc.), 938882 Battery life*: Approx. 3 years under normal use Dust/Water protection level*: IP67 *Digital models **Analog models SPECIFICATIONS L1= Reading on depth vernier Metric Digital model Functions of Digital Model Origin-set, Zero-setting, Automatic power on/off, Data Range: L1 (L2 and L3) Order No. Resolution Accuracy output, inch/mm conversion (inch/mm models) 10 - 160mm (0 - 150mm) 571-254-10 0.01mm ±0.03mm Alarm: Low voltage, Counting value composition error L1 10 - 210mm (0 - 200mm) 571-255-10 0.01mm ±0.03mm Optional Accessories 05CZA624: SPC cable with data switch (1m)* Inch/Metric Digital model 05CZA625: SPC cable with data switch (2m)* Range: L1 (L2 and L3) Order No. Resolution Accuracy 02AZD790A: SPC cable for U-WAVE w/ data switch (160mm)* L1= Reading on .4” - 6.4” (0 - 6”) 571-264-10 .0005” / 0.01mm ±0.03mm ––––––: Extension base (see page D-55.) hook vernier *For digital models .4” - 8.4” (0 - 8”) 571-265-10 .0005” / 0.01mm ±0.03mm

D Metric L2 Range: L1 (L2 and L3) Order No. Vernier reading Accuracy 10 - 150mm (0 - 150mm) 527-401 0.05mm ±0.05mm 10 - 200mm (0 - 200mm) 527-402 0.05mm ±0.05mm L1= Reading on 10 - 300mm (0 - 300mm) 527-403 0.05mm ±0.08mm hook vernier — Reading on Metric with fine adjustment depth vernier Range: L1 (L2 and L3) Order No. Vernier reading Accuracy

10 - 150mm (0 - 150mm) 527-411 0.02mm ±0.03mm L3 10 - 200mm (0 - 200mm) 527-412 0.02mm ±0.03mm 10 - 300mm (0 - 300mm) 527-413 0.02mm ±0.04mm

DIMENSIONS

Unit: mm 2-ø5 L (57.5) Range L

(41.3) 0 - 150mm 247

70 0 - 200mm 297

16

26 100

10 2-ø5 10 L

7 11

Range L 21 0 - 150mm 260 10 9.5 0 - 200mm 310 0 - 300mm 410

D-52 Dial Depth Gage SERIES 527 — with Fine Adjustment

FEATURES • Easy-to-read dial. • Base and measuring faces are hardened Technical Data • Made of hardened stainless steel. and micro-lapped. Accuracy: Refer to the list of specifications. • Optional wider extension bases are Dial reading: 0.05mm or .001” available. Base size: 100 x 6.5mm (W x T) Optional Accessory ––––––: Extension base

527-301-50

SPECIFICATIONS DIMENSIONS

Metric Unit: mm 2-ø5 Range Order No. Dial reading Accuracy L 0 - 150mm 527-301-50 0.05mm ±0.05mm 0 - 200mm 527-302-50 0.05mm ±0.05mm 11 16

0 - 300mm 527-303-50 0.05mm ±0.08mm 4 70 100 Inch 70 20 34.5 Range Order No. Dial reading Accuracy 7 Range L 0 - 6” 527-311-50 .001” ±.001” 10 0 - 150mm 260 0 - 8” 527-312-50 .001” ±.001” 0 - 200mm 310 0 - 12” 527-313-50 .001” ±.0015” 0 - 300mm 410

Extension Bases Optional Accessories for Depth Gage

FEATURES • Attaches to the base (reference face) plate • These extension bases cannot be attached D of a depth gage to extend its span. to 0 - 600mm, 0 - 1000mm, 0-24” and 0-40” range models.

900372 SPECIFICATIONS Metric Inch Extension base Size L Order No. Dimensions a, b n Size L Order No. Dimensions a, b n 180mm 900370 70mm, 55mm 2 7” 900367 2.76”, 2.17” 2 260mm 900371 35mm, 60mm 5 10” 900368 1.38”, 2.36” 5 320mm 900372 70mm, 55mm 4 12” 900369 2.76”, 2.17” 4 Attaching the extension base DIMENSIONS Attach it to the depth gage base on a surface plate L Unit: mm Extension base b a a a b

R5 R5 17 7

Depth gage base n-M4×P=0.7 Order No. L a b n Mounting screw Washer No. 8-32UNC 900370 180 70 55 2 900371 260 35 60 5 900372 320 70 55 4

D-53 ABSOLUTE Digimatic/Dial Depth Gage SERIES 547, 7

FEATURES • ABSOLUTE Digimatic Depth Gage keeps • Designed with a back plunger type dial track of the origin point (once set) for the indicator for upward-facing reading. (7231, entire life of the battery (Series 547). 7237, 7238) • Wide probing range is available with the • SPC data output (Series 547). supplied extension rod. (Refer to page VIII for details.) • Bottom surface of the base is hardened, ground and lapped for highest degree of flatness. Technical Data of Digimatic Model Accuracy: Refer to the list of specifications. (excluding quantizing error for digital models) Resolution: 0.01mm type 0.01mm 7231 0.001mm type 0.001mm/0.001mm 547-211 7214 .0005”/0.01mm type .0005”/0.01mm .00005”/0.001mm type .0005”/.0001”/.00005”/ 0.01mm/0.001mm Flatness of base face: 5µm or 2µm Contact point: Carbide-tipped ball point or needle Measuring force: 1.5N Display: LCD Scale type: ABSOLUTE electrostatic linear encoder 7211 Max. response speed: Unlimited Battery: SR44 (1 pc.), 938882 Battery life: Approx. 7,000 hours under normal use Technical Data of Dial Model 7222 Accuracy: Refer to the list of specifications. 7224 Dial reading: 0.01mm or .001” SPECIFICATIONS Flatness of base face: 5µm or 2µm Contact point: Carbide-tipped ball point Metric Digital Type (needle point: 7210, 7222) Range Order No. Stroke Accuracy Extension rod Base (W x T, flatness) Measuring force: 1.4N (2.5N: 7213, 7214, 7217S, 7218S) 0 - 200mm 547-211 12.7mm ±20µm 5 pcs. (10, 20, 30, 30, 100mm) 63.5 x 16mm, 5µm 0 - 200mm 547-212 12.7mm ±20µm 5 pcs. (10, 20, 30, 30, 100mm) 101.6 x 16mm, 5µm Functions of Digital Model Origin-set/Preset, Zeroset, GO/±NG judgment, Counting 0 - 200mm 547-251 12.7mm ±5µm 5 pcs. (10, 20, 30, 30, 100mm) 63.5 x 16mm, 2µm direction switching, Power ON/OFF, Simplified calculation, 0 - 200mm 547-252 12.7mm ±5µm 5 pcs. (10, 20, 30, 30, 100mm) 101.6 x 16mm, 2µm Function lock, Data hold, Data output, inch/mm conversion 0.01mm graduation 0.001mm graduation (inch/mm models) Alarm: Low voltage, Counting value composition error, Inch/Metric Digital Type Over-flow error, Tolerance limit setting error D Range Order No. Stroke Accuracy Extension rod Base (W x T, flatness) Optional Accessories for Digital Model 0 - 8” 547-217S .5” ±.001” 4 pcs. (.5”, 1”, 2”, 4”) 2.5” x .63”, .0002” 905338: SPC cable (1m) 0 - 8” 547-218S .5” ±.001” 4 pcs. (.5”, 1”, 2”, 4”) 4” x .63”, .0002” 905409: SPC cable (2m) 0 - 8” 547-257S .5” ±.0002” 4 pcs. (.5”, 1”, 2”, 4”) 2.5” x .63”, .00008” 02AZD790F: SPC cable for U-WAVE (160mm) 0 - 8” 547-258S .5” ±.0002” 4 pcs. (.5”, 1”, 2”, 4”) 4” x .63”, .00008” .0005”/0.01mm graduation .00005”/0.001mm/ graduation

Metric Dial Type Range Order No. Stroke Accuracy Extension rod Base (W x T, flatness) 0 - 10mm 7210* 10mm ±15µm — 40 x 16mm, 5µm 0 - 200mm 7211 10mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 63.5 x 16mm, 5µm 0 - 200mm 7212 10mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 101.6 x 16mm, 5µm 0 - 210mm 7213 30mm ±30µm 3 pcs. (30, 60, 90mm) 63.5 x 16mm, 5µm 0 - 210mm 7214 30mm ±30µm 3 pcs. (30, 60, 90mm) 101.6 x 16mm, 5µm 0 - 200mm 7220 10mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 100 x 18mm, 5µm 0 - 200mm 7221 10mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 150 x 18mm, 5µm 0 - 10mm 7222* 10mm ±15µm — ø16mm, 5µm 0 - 10mm 7223 10mm ±15µm — ø25mm, 5µm 0 - 10mm 7224 10mm ±15µm — ø40mm, 5µm 0 - 200mm 7231 5mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 63.5 x 16mm, 5µm *with needle probe Inch Dial Type Range Order No. Stroke Accuracy Extension rod Base (W x T, flatness) 0 - 8” 7217S 1” ±.002” 3 pcs. (1”, 2”, 4”) 2.5” x .63”, .0002” 0 - 8” 7218S 1” ±.002” 3 pcs. (1”, 2”, 4”) 4” x .63”, .0002” 0 - 8” 7237 .2” ±.002” 4 pcs. (.5”, 1”, 2”, 4”) 2.5” x .63”, .0002” 0 - 8” 7238 .2” ±.002” 4 pcs. (.5”, 1”, 2”, 4”) 4” x .63”, .0002”

D-54 DIMENSIONS

Unit: mm

ø57 ø57 ø57 (114) 114 (104) 65

ø8 (65)

(65) ø8 ø15.4 ø8 ø16 35.5 35.5 35.5 8 12 12 17 17 17 (10) (10) (10) SR 0.2 SR 0.2 SR1.5 ø5 ø3 ø5 ø5 ø40 A 7223 A= ø25mm 7210 7222 7224 A= ø40mm

ø57 ø57 ø57 (104) (100) (100)

ø16 (65) ø16 ø16 (65) ø8 ø8 ø8 (65) (35.7) (35) (11) (35) (18)

17 ø6 17 (10) SR 1.5 (10) ø5 (11) SR 1.5 (30) ø5 ø6 14 ø6.5 A SR1.5 ø11 ø5 25 50 A 100 7211 A= 63.5mm 7213, 7217S A= 63.5mm 7212 A= 101.6mm 7214, 7218S A= 101.6mm 7220

ø39 ø57

D (100) ø16 ø16 M2.5x0.45 (64)

ø8 (65) (35.7) ø8 (35) 22 (11) (18) 17

(5) SR 1.5 17 SR 1.5 (10) SR 1.5 ø5 ø5 ø6 ø6.5 A ø11 25 25 75 7231, 7237 A= 63.5mm 150 7238 A= 101.6mm 7221

ø59 (105)

(67) ø16 (35) (11) 17 (B) SR1.5 ø5 ø6 A

547-211, 547-251, 547-217S, 547-257S A= 63.5mm 547-212, 547-252, 547-218S, 547-258S A= 101.6mm 547-211, 547-212, 547-251, 547-252 B= 12mm (547-217S, 547-218S, 547-257S, 547-258S B= 12.9mm )

D-55 Tire Tread Depth Gage SERIES 571, 700

FEATURES • ABSOLUTE Digimatic Tread Depth Gage • Specially designed to measure tire tread keeps track of the origin point (once set) depth. for the entire life of the battery (Series • Plastic construction for lightweight use 571). (Series 700). • With SPC data output (Series 571). (Refer to page VIII for details.) Technical Data Accuracy: Refer to the list of specifications. (excluding quantizing error Resolution: 0.01mm or .0005"/0.01mm (571 Series) 0.1mm or .001”/0.1mm (700 Series) Display: LCD Battery: SR44 (1 pc.), 938882 Battery life: Approx. 2 years under normal use 700-104 (approx. 2000 hours: Series 571) Functions SPECIFICATIONS Origin-set*, Zero-setting, Data output* Power ON/OFF, inch/mm conversion (inch/mm models) Metric Inch/Metric Alarm: Low voltage, Counting value composition error Range Order No. Accuracy Range Order No. Accuracy * Series 571 0 - 25mm 571-100MOT-10 ±0.02mm 0 - 1” 571-200MOT-10 ±.0005” Optional Accessories for Series 571 0 - 25mm 700-104 ±0.2mm 0 - 1” 700-105 ±.008” 959143: Data hold unit 959149: SPC cable with data switch (1m) 959150: SPC cable with data switch (2m) DIMENSIONS 02AZD790C: SPC cable for U-WAVE w/ data switch (160mm)

Unit: mm 113 87.2 25 83

10 29 16 16 60 (60) ø1.5 ø3 ø3 0.8 (3.5) 13 4 4.3 ø3 571-100MOT-10 700-104 D

Depth Base Attachment Optional Accessory for Calipers

FEATURES DIMENSIONS

• For 100mm, 150mm, 200mm, 300mm, 4”, Unit: mm 6”, 8” and 12” vernier and dial calipers

which have a depth measuring bar. c e

• Finely ground base surface and secure d

locking clamp. a b Depth base attachment 050084-10 Size a b c d e 75mm 25 75 24.5 9 16 100mm 25 100 24.5 9 16 125mm 30 125 28.5 11.5 20 SPECIFICATIONS f: Base thickness Metric Size Order No. Applicable measuring range of caliper 75mm 050083-10 100mm, 15mm, 200mm, 4”, 6” and 8” 100mm 050084-10 100mm, 15mm, 200mm, 4”, 6” and 8” 125mm 050085-10 300mm and 12”

D-56