Seca 207 Baby Measuring Rod with Large Calipers

Total Page：16

File Type：pdf, Size：1020Kb

Seca 207 Baby Measuring Rod with Large Calipers

seca 207 seca 207 Baby measuring rod with product sheet product large calipers optimized • Fixed headpiece and smooth sliding foot positioner. • Space saving and mobile. • Attachable to changing tables or for wall mounting. • Foldable calipers for easy storage. seca 207: seca 207 Reliable partner for healthy growing. ne of the central tasks in pediatrics is to recognize growth disorders in children O as quickly as possible. Only then can effective therapies be applied to also avoid illnesses which may arise from these disorders. Only precise results lead to a correct diagnosis – in order to ascertain how fast a child grows in inches per year (essential for the dynamic assessment of the growth of a child). Such precision is sheet product possible with the modern and handy measuring instruments from seca. For precise measuring when a baby is lying down. The space-saving measuring rod seca 207 can be firmly screwed to the changing table (wall mounting also possible) or used as a mobile rod. Large head and foot positioners make it easy to determine the length and the calipers fold for ease of storage. Made of aluminum for durability. The scaleʼs high-quality printing is also tear-resistant. Measurements are precisely displayed and easy to read Movable calipers at one end of the measuring rod even after years of use. make this instrument suitable for use with both babies and toddlers. seca 207 Technical Data • Measuring range: 0 – 99 cm, 0 – 99 cm / 0 – 39" • Graduation: 1 mm, 1 mm / 1/8" • Dimensions (WxHxD): 1,040 x 120 x 286 mm / 40.9 x 4.7 x 11.3" • Dimensions when folded (WxHxD): 1,040 x 120 x 30 mm / 40.9 x 4.7 x 1.2" We reserve the right to make modifications. reserve We • Weight: 810 g / 1.8 lbs 201120702018 seca gmbh & co. kg • Hammer Steindamm 3 – 25 • 22089 Hamburg • Germany Phone +49 40 20 00 00 0 • Fax +49 40 20 00 00 50 • [email protected] • www.seca.com.

Copy Link

Recommended publications

Verification Regulation of Steel Ruler
ITTC – Recommended 7.6-02-04 Procedures and guidelines Page 1 of 15 Effective Date Revision Calibration of Micrometers 2002 00 ITTC Quality System Manual Sample Work Instructions Work Instructions Calibration of Micrometers 7.6 Control of Inspection, Measuring and Test Equipment 7.6-02 Sample Work Instructions 7.6-02-04 Calibration of Micrometers Updated / Edited by Approved Quality Systems Group of the 28th ITTC 23rd ITTC 2002 Date: 07/2017 Date: 09/2002 ITTC – Recommended 7.6-02-04 Procedures and guidelines Page 2 of 15 Effective Date Revision Calibration of Micrometers 2002 00 Table of Contents 1. PURPOSE .............................................. 4 4.6 MEASURING FORCE ......................... 9 4.6.1 Requirements: ............................... 9 2. INTRODUCTION ................................. 4 4.6.2 Calibration Method: ..................... 9 3. SUBJECT AND CONDITION OF 4.7 WIDTH AND WIDTH DIFFERENCE CALIBRATION .................................... 4 OF LINES .............................................. 9 3.1 SUBJECT AND MAIN TOOLS OF 4.7.1 Requirements ................................ 9 CALIBRATION .................................... 4 4.7.2 Calibration Method ...................... 9 3.2 CALIBRATION CONDITIONS .......... 5 4.8 RELATIVE POSITION OF INDICATOR NEEDLE AND DIAL.. 10 4. TECHNICAL REQUIREMENTS AND CALIBRATION METHOD ................. 7 4.8.1 Requirements .............................. 10 4.8.2 Calibration Method: ................... 10 4.1 EXTERIOR ............................................ 7 4.9 DISTANCE
[Show full text]
Barrel and Overall Length Measuring Procedure
TENNESSEE BUREAU OF INVESTIGATION Forensic Services Division Firearms/Toolmarks Standard Operating Procedures Manual Barrel and Overall Length Measuring Procedure 7.0 BARREL AND OVERALL LENGTH MEASURING PROCEDURE 7.1 Scope: One of the routine procedures conducted in a firearm examination is determining the barrel length and overall length of the firearm. 7.2 Precautions/Limitations: Accuracy is imperative to this examination. It is vitally important that the firearm examiner use calibrated measuring devices, or instruments checked against calibrated measuring devices. These measuring devices will be checked against a NIST traceable ruler prior to being placed into service. Also, care shall be taken if any object is placed down the barrel to help expedite the barrel length measurement. Only a non-marring item should be placed down the barrel. Test firing of the firearm should be performed prior to placing any item down the barrel if possible. TCA Section 39-17-1301 defines a short-barreled rifle and shotgun as having a barrel length of less than sixteen inches (16") for a rifle and eighteen inches (18") for a shotgun, or an overall firearm length of less than twenty-six inches (26"). TCA Section 39-17-1302 classifies those as prohibited weapons. This information is also included in the federal National Firearms Act, and may be located at www.atf.gov. 7.3 Related Information: 7.3.1 Firearm Examination and Classification Procedure 5 7.3.2 Safe Firearm Handling Procedure 4 7.3.3 Worksheet Appendix 1 7.3.4 Firearm Safety Appendix 3 7.3.5 Range of Conclusions Appendix 4 7.3.6 Measurement of Uncertainty Appendix 10 7.4.
[Show full text]
International Ejournals
ISSN 0976 – 1411 Available online at www.internationaleJournals.com International eJournals International eJournal of Mathematics and Engineering 211 (2013) 2075 - 2083 The Importance of Dalhousie Survey Camp for Graduate Engineering Students 1 Rajinder Singh, 2Arvind Dewangan and 3 Amarjeet Singh 1R.P.Indra Prastha Institute of Technology –RPIIT, Bastara-Karnal, Haryana INDIA. Email: [email protected] 2Civil Engineering Department, Haryana college of Technology & Management, HCTM Technical Campus Kaithal-Haryana INDIA. Email: [email protected] 3 Uraha Infra Ltd. Jodhpur-NH73 INDIA ABSTRACT: Surveying is the branch of civil engineering which deals with measurement of relative positions of an object on earth’s surface by measuring the horizontal distances, elevations, directions, and angles. Surveying is typically used to locate and measure property lines; to lay out buildings, bridges, channels, highways, sewers, and pipelines for construction; to locate stations for launching and tracking satellites; and to obtain topographic information for mapping and charting. It is generally classified into two categories: Plane surveying (for smaller areas) and Geodetic surveying (for very large areas). Surveying is the art of making suitable measurements in horizontal or vertical planes. This is one of the important subjects of civil engineering. Without taking a survey of the plot where the construction is to be carried out, the work cannot begin. Dalhousie provides all type of location in a platform . Key Words : 1.Surveying
[Show full text]
Moore & Wright 2016/17- Complete Catalogue
MW-2016E MW-2016E MOORE & WRIGHT Moore & Wright - Europe and North Africa Moore & Wright - Rest of the World Bowers Group Bowers Eclipse Equipment (Shanghai) Co., Ltd. Unit 3, Albany Court, 8th Building, No. 178 Chengjian Rd Albany Park, Camberley, Minhang District, Shanghai 201108 Surrey GU16 7QR, UK P.R.China Telephone: +44 (0)1276 469 866 Telephone: +86 21 6434 8600 Fax: +44 (0)1276 401 498 Fax: +86 21 6434 6488 Email: [email protected] Email: [email protected] Website: www.moore-and-wright.com Website : www.moore-and-wright.com PRODUCT CATALOGUE 16/17 Partners in Precision PRODUCT CATALOGUE 16/17 INNOVATIVE NEW PRODUCTS IN EVERY SECTION OF THIS ALL-INCLUSIVE, EASY TO USE REFERENCE MWEX2016-17_FC-BC.indd 1 19/11/2015 11:58 MOORE & WRIGHT A Brief History... Founded in 1906 by innovative young engineer, Frank Moore, Moore & Wright has been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years. With roots fixed firmly in Sheffield, England, the company began by manufacturing a range of calipers, screwdrivers, punches and other engineer’s tools. Following investment from Mrs Wright, a shrewd Sheffield businesswoman, Frank was able to expand the business and further develop his innovative designs. By the mid-nineteen twenties, thanks to the company’s enviable reputation, Moore & Wright was approached by the UK Government to consider manufacturing a range of quality micrometers. It was in this field that Moore & Wright’s status as UK agent for the Swiss Avia range of products and subsequent acquisition of the Avia brand and manufacturing rights, proved invaluable.
[Show full text]
Procedure for Adult Height
NIHR Southampton Biomedical Research Centre The NIHR Southampton Biomedical Research Centre (BRC) has a tight quality assurance system for the writing, reviewing and updating of Standard Operating Procedures. As such, version-controlled and QA authorised Standard Operating Procedures are internal to the BRC. The Standard Operating Procedure from which information in this document has been extracted, is a version controlled document, managed within a Quality Management System. However, extracts that document the technical aspects can be made more widely available. Standard Operating Procedures are more than a set of detailed instructions; they also provide a necessary record of their origination, amendment and usage within the setting in which they are used. They are an important component of any Quality Assurance Framework, but in themselves are insufficient and need to be used and interpreted with care. Alongside the extracts from our Standard Operating Procedures, we have also made available here an example Standard Operating Procedure and a word version of a Standard Operating Procedure template. Using the example and the Standard Operating Procedure template, institutions can generate their own Standard Operating Procedures and customise them, in line with their own institutions. Simply offering a list of instructions to follow does not assure that the user is able to generate a value that is either accurate or precise so here in the BRC we require that Standard Operating Procedures are accompanied by face-to-face training. This is provided by someone with a qualification in the area or by someone with extensive experience in making the measurements. Training is followed by a short competency assessment and performance is monitored and maintained using annual refresher sessions.
[Show full text]
Field Operations and Methods for Measuring the Ecological Condition of Wadeable Streams
EPA/620/R-94/004F September 1998 ENVIRONMENTAL MONITORING AND ASSESSMENT PROGRAM- SURFACE WATERS: FIELD OPERATIONS AND METHODS FOR MEASURING THE ECOLOGICAL CONDITION OF WADEABLE STREAMS Edited by James M. Lazorchak1, Donald J. Klemm1, and David V. Peck2 1 U.S. Environmental Protection Agency Ecosystems Research Branch Ecological Exposure Research Division National Exposure Research Laboratory Cincinnati, OH 45268 2 U.S. Environmental Protection Agency Regional Ecology Branch Western Ecology Division National Health and Environmental Effects Research Laboratory Corvallis, OR 97333 NATIONAL EXPOSURE RESEARCH LABORATORY OFFICE OF RESEARCH AND DEVELOPMENT U.S. ENVIRONMENTAL PROTECTION AGENCY RESEARCH TRIANGLE PARK, NC 27711 NATIONAL HEALTH AND ENVIRONMENTAL EFFECTS RESEARCH LABORATORY OFFICE OF RESEARCH AND DEVELOPMENT U.S. ENVIRONMENTAL PROTECTION AGENCY RESEARCH TRIANGLE PARK, NC 27711 SECTION 7 PHYSICAL HABITAT CHARACTERIZATION by Philip R. Kaufmann1 and E. George Robison2,3 In the broad sense, physical habitat in streams includes all those physical attributes that influence or provide sustenance to organisms within the stream. Stream physical habitat varies naturally, as do biological characteristics; thus, expectations differ even in the absence of anthropogenic disturbance. Within a given physiographic-climatic region, stream drainage area and overall stream gradient are likely to be strong natural determi- nants of many aspects of stream habitat, because of their influence on discharge, flood stage, and stream power (the product of discharge times gradient). Summarizing the habitat results of a workshop conducted by EMAP on stream monitoring design, Kaufmann (1993) identified seven general physical habitat attributes important in influencing stream ecology: ! Channel Dimensions ! Channel Gradient ! Channel Substrate Size and Type ! Habitat Complexity and Cover ! Riparian Vegetation Cover and Structure ! Anthropogenic Alterations ! Channel-Riparian Interaction All of these attributes may be directly or indirectly altered by anthropogenic activities.
[Show full text]
2.3. DEVELOPMENT of DESIGN 2.3.1. Surveying Surveying Is The
2.3. DEVELOPMENT OF DESIGN 2.3.1. Surveying Surveying is the technique and science of accurately determining the terrestrial or 3D space position of points and the distances and angles between them. These points are usually, but not exclusively, associated with positions on the surface of the Earth, and are often used to establish land maps and boundaries for ownership or governmental purposes. In order to accomplish their objective, surveyors use elements of geometry of engineering, mathematics, physics, and law. Surveying has been an essential element in the development of the human environment since the beginning of recorded history (ca. 5000 years ago) and it is a requirement in the planning and execution of nearly every form of construction. Its most familiar modern uses are in the fields of transport, building and construction, communications, mapping, and the definition of legal boundaries for land ownership. Method Historically, angles and distances were measured using a variety of means, such as chains with links of a known length, for instance a Gunter's Chain, or measuring tapes made of steel or invar. In order to measure horizontal distances, these chains or tapes would be pulled taut, to reduce sagging and slack. Additionally, attempts to hold the measuring instrument level would be made. In instances of measuring up a slope, the surveyor might have to "break" the measurement- that is, raise the rear part of the tape upward, plumb from where the last measurement ended. Historically, horizontal angles were measured using a compass, which would provide a magnetic bearing, from which deflections could be measured.
[Show full text]
Determining Slope 3Notes
DETERMINING SLOPE 3NOTES OBJECTIVES The purpose of this chapter is to: • Measure slope. • Calculate percent slope. • Understand the different locations that slope may be measured from. Slope What is slope? Slope is the change in elevation, measured in consistent units, from one point to another. Why would slope be a factor in evaluating a site for an onlot sewage disposal system? DRevisedETERMINING 5/12 SLOPE 3-1 How To Measure Slope Slope must be measured perpendicular to the contours of the land. Contours are lines of equal NOTES elevation. There are two ways to measure slope: 1) By taking field measurements and dividing the vertical distance by the horizontal distance (rise ÷ run), and then multiplying by 100 for percent slope. 2) By measuring the angle with an instrument. 3-2 DETERMINING SLOPE 1) VERTICAL AND HORIZONTAL DISTANCES Slope can be calculated by using the rise over run method of dividing the vertical distance by NOTES the horizontal distance. Multiply the answer you get by 100 to get percent slope. vertical distance ÷ horizontal distance = slope RUN RISE DETERMINING SLOPE 3-3 SAMPLE PROBLEM Solve for the percent slope. Round to the nearest whole percent. NOTES Vertical distance is 6 feet 8 inches and horizontal distance is 38 feet. Percent slope = ________ EXERCISE 3-1 Solve for the percent slope. Round to the nearest whole percent. 1) Vertical distance is 5 feet and horizontal distance is 57 feet. Percent slope =_______ 2) Vertical distance is 3 feet 5 inches and horizontal distance is 56 feet. Percent slope =_______ 3) Vertical distance is 5 feet 4 inches and horizontal distance is 48 feet 7 inches.
[Show full text]
Tools and Their Uses NAVEDTRA 14256
NONRESIDENT TRAINING COURSE June 1992 Tools and Their Uses NAVEDTRA 14256 DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. Although the words “he,” “him,” and “his” are used sparingly in this course to enhance communication, they are not intended to be gender driven or to affront or discriminate against anyone. DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. NAVAL EDUCATION AND TRAINING PROGRAM MANAGEMENT SUPPORT ACTIVITY PENSACOLA, FLORIDA 32559-5000 ERRATA NO. 1 May 1993 Specific Instructions and Errata for Nonresident Training Course TOOLS AND THEIR USES 1. TO OBTAIN CREDIT FOR DELETED QUESTIONS, SHOW THIS ERRATA TO YOUR LOCAL-COURSE ADMINISTRATOR (ESO/SCORER). THE LOCAL COURSE ADMINISTRATOR (ESO/SCORER) IS DIRECTED TO CORRECT THE ANSWER KEY FOR THIS COURSE BY INDICATING THE QUESTIONS DELETED. 2. No attempt has been made to issue corrections for errors in typing, punctuation, etc., which will not affect your ability to answer the question. 3. Assignment Booklet Delete the following questions and write "Deleted" across all four of the boxes for that question: Question Question 2-7 5-43 2-54 5-46 PREFACE By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected reading, and your desire to succeed are also necessary to successfully round out a fully meaningful training program. THE COURSE: This self-study course is organized into subject matter areas, each containing learning objectives to help you determine what you should learn along with text and illustrations to help you understand the information.
[Show full text]
Read Book Mathematical Drawing and Measuring Instruments Ebook
MATHEMATICAL DRAWING AND MEASURING INSTRUMENTS PDF, EPUB, EBOOK William Ford Stanley | 382 pages | 19 Aug 2017 | Andesite Press | 9781375478311 | English | none Mathematical Drawing and Measuring Instruments PDF Book Bi-Colour Pencils. How can measuring mistakes be avoided? Rates are now changing rapidy, often with little notice to us, so all the data has been transferred to the FAQ page for speedy updating. Select the drafting set that fits your needs best. Units on that kind of the ruler are millimeters, inches, agate, picas, and points. Loose Sheets. Just CLICK on the icon of the rule type you are looking for at the left , to see the matching catalog. Save my name, email, and website in this browser for the next time I comment. A truly beautiful set. Tech Pouches. If we have your valid data on file , you can just click on the ORDER email link to place an order and indicate your approval to bill, and we will do the rest. Want something? Round Brushes Flat Brushes. Back in the day when children used to write on slates in school, they needed a cloth to clean their slates. Mixed Media Colours. Full Name Comment goes here. Has a 45 degree adjustment range, which permits degrees and degrees by rotating the triangle. Oil Pastels. Mathematics Laboratory,Club,Library. Glitter Pens. Rolling parallel ruler Cleaning Kits. Fab A5. Vintage B5. No marks or owner's ID. One leg contains needle at the bottom and other leg contains a ring in which a pencil is placed. You will receive a link and will create a new password via email.
[Show full text]
Cadastral Survey Project
CADASTRALSURVEY LAND AND ITS DEFINITION Land is a word whose meaning has remained elusive to this day and varies according to each individual, according to his way of life. While it is lifeblood and sacred for some, it is an economic opportunity for development for others, but the emotional attachment one has to the land is the one which remains in life and even after that. Lands, territories and resources have particular cultural and spiritual significance and value for indigenous people who live there, they are the very basis for the continued existence of their societies in every part of the world. The United Nations Ad Hoc group of Experts on Cadastral Surveying and Land Information states that “Land is defined as an area of the surface of the earth together with the water, soil, rocks, minerals and hydrocarbons beneath or upon it and the air above it. It embraces all things which are related to a fixed area or point of the surface of the each, including the areas covered by water, including the sea”. • At the dawn of civilization in the history of mankind, people started to realize the value of agriculture and livestock rearing, people needed land and water for irrigation land as a resource therefore a boundary to establish ownership and safeguard land against occupation from others was inevitable and an absolute necessity. 1 • This gave birth to early surveys for establishing boundaries, classification of land for farming, grazing, habitat, recreation, economic pursuit, and social activity. This was a reason for advance of societies which later grew into kingdoms and monarchies which had always had land as the crux to expand their boundaries across the world.
[Show full text]
Field Operations Manual
United States Environmental Protection Agency Office of Water Office of Environmental Information Washington, DC EPA-841-B-07-009 National Rivers and Streams Assessment Field Operations Manual April 2009 National Rivers and Streams Assessment Final Manual Field Operations Manual Date: April 2009 Page 115 6.0 WADEABLE STREAMS 6.1 Water Quality This section describes the procedures and methods for the field collection and analysis of the water quality indicators (in-situ measurements, water chemistry, and sediment enzymes) from wadeable streams and rivers. 6.1.1 In Situ Measurements of Dissolved Oxygen, pH, Temperature, and Conductivity 6.1.1.1 Summary of Method You will measure dissolved oxygen (DO), pH, temperature, and conductivity by using a multi-parameter water quality meter (or sonde). Take all measurements at the X site at 0.5 m depth, or mid-depth if depth is <1 m. The site depth must be accurately measured before taking the measurements, and care should be taken to avoid the probe contacting bottom sediments. 6.1.1.2 Equipment and Supplies Table 6.1-1 provides the equipment and supplies needed to measure dissolved oxygen, pH, temperature, and conductivity. Record the measurements on the Field Measurement Form, as seen in Figure 6.1-1. Table 6.1-1. Equipment and supplies—DO, pH, temperature, and conductivity For taking measurements and Multi-parameter water quality meter with DO, pH, calibrating the water quality meter temperature, and conductivity probes. Extra batteries De-ionized and tap water Calibration cups and standards QC calibration standard Barometer or elevation chart to use for calibration For recording measurements Field Measurement Form Pencils (for data forms) National Rivers and Streams Assessment Final Manual Field Operations Manual Date: April 2009 Page 116 Figure 6.1-1.
[Show full text]