Cogset Type Freehub Body Design

Total Page:16

File Type:pdf, Size:1020Kb

Cogset Type Freehub Body Design KNO - Cogset freehub body compatibility chart (v2.0w), Seite 1 (c) 2016 Da Reverend | Disclaimer: No liability for any potential errors or inaccuracies. Please verify information before you buy! Subject to change without notice (see version indicator). Lock ring spline type Campagnolo Shimano Shimano Shimano Shimano Shimano (int.) Cogset type Freehub body design ROAD Campagnolo Shimano ROAD 8spd / 9spd Shimano ROAD 10spd only Shimano ROAD 10spd only Shimano ROAD 11spd ROAD (see right hand for known stepped (Dura Ace FH-7800, exceptions) FH-7801, WH-7800, WH-7801; Ultegra WH-6600) ROAD MTN Shimano MTN 8spd / 9spd / Sram MTN 10spd / 11spd 11spd („XD“) Campagnolo ROAD 10spd / 11spd ( Y ) Direct fit ( N ) Different spline pattern ( N ) Different spline pattern ( N ) Different spline pattern ( N ) Different spline pattern ( N ) Just no. Shimano / Sram ROAD 9spd Shimano / Sram MTN 9spd ( N ) Different ( Y ) Direct fit ( N ) Freehub not wide enough ( N ) Splines too high (step), ( Y ) Indirect fit with spacer ( N ) Just no. spline pattern freehub not wide enough Sram ROAD 10spd Sram MTN 10spd ( N ) Different ( Y ) Direct fit ( N ) Freehub not wide enough ( N ) Splines too high (step), ( Y ) Indirect fit with spacer ( N ) Just no. spline pattern freehub not wide enough Shimano MTN 10spd ( N ) Different ( Y ) Direct fit ( N ) Freehub not wide enough ( N ) Splines too high (step), ( Y ) Indirect fit with spacer ( N ) Just no. spline pattern freehub not wide enough Shimano ROAD 10spd (see below ( N ) Different ( Y ) Indirect fit with spacer ( Y ) Direct fit ( N ) Splines too high (step). ( Y ) Indirect fit with spacer(s) ( N ) Just no. for known exceptions) spline pattern Reportedly, in some cases made compatible through modification. Shimano ROAD 10spd (Dura Ace ( N ) Different ( Y ) Indirect fit with spacer ( Y ) Direct fit ( Y ) Direct fit ( Y ) Indirect fit with spacer(s) ( N ) Just no. CS-7900, CS-7800; Ultegra CS-6700, spline pattern CS-6600 with 11T / 12T top gear) Shimano ROAD 10spd (Ultegra CS- ( N ) Different ( Y ) Direct fit ( N ) Freehub not wide enough ( N ) Splines too high (step), ( Y ) Indirect fit with spacer ( N ) Just no. 6600 with top gear ≥13T; Tiagra CS- spline pattern freehub not wide enough 4600; CS-HG500-10) Shimano / Sram ROAD 11spd ( N ) Different ( N ) Freehub not wide enough. ( N ) Freehub not wide enough ( N ) Splines too high (step), ( Y ) Direct fit ( N ) Just no. spline pattern Reportedly, in some cases made freehub not wide enough compatible through modification (machining of spider carrying largest cog or filing of freehub body) Sram MTN 11spd (see below ( N ) Just no. ( N ) Just no. ( N ) Just no. ( N ) Just no. ( N ) Just no. ( Y ) Direct fit for known exceptions) Shimano MTN 11spd / Sram ( N ) Different ( Y ) Direct fit ( N ) Freehub not wide enough ( N ) Splines too high (step), ( Y ) Indirect fit with spacer ( N ) Just no. 11spd ('NX' PG-1130) spline pattern freehub not wide enough (however, practically irrelevant as incompatibility at RD level).
Recommended publications
  • LWA NEWS APR 2013.Cwk
    April 2013 IN THIS ISSUE two-night stay at the historic Times Pat Ytsma Bike Tour 1 House Bed and Breakfast in Jim Thorpe. NSB 2 A Reason to Ride 2 All pre-registered riders will receive a t- Helmuts and Membership 3 shirt and lunch will be served to all VOM 3 participants after the ride. CPR Presentation 4 LWA MeetUP 4 Individuals interested in making personal Bits on Bikes 4 5-6 donations to the ride can send them to Tax on Bikes 6-7 the Pat Ytsma Ride Safe Bike Tour, Membership Update 7 1720 Spillman Drive, Suite 200, QRQ of the Month 8 Bethlehem, PA 18105. The ride Whoʼs Leading? 8 organizers are also seeking corporate and The Touring Report 9 group sponsors whose donations will be Scooterʼs Scoop 10 honored with a branded mile-marker sign Ride Leaders Meeting 11 PAT YTSMA and their logo on the ride website and on LWA Meeting Schedule 11 RIDE SAFE BIKE TOUR the official PYRSBT ride t-shirt. Classified Ads 11 JUNE 2, 2013 LWA Financial Report 12 Groups interested in being sponsors Member Pic Page 13 The 2013 Pat Ytsma Ride Safe Bike should contact Sal or Russ at 610-865- LWA Sponsors 14 Tour to benefit Pat’s Children’s College 2621. Questions about the ride can be Fund will take place on Sunday, June 2, addressed to ride organizer, Kirk Koehler, 2013, with a start at Earl Adams [email protected], 610-865- Memorial Park in Breinigsville, PA. Pat, 2621. CLUB OFFICERS a former LWA member and an advocate Jack Helffrich.............President for bike safety, died on December 8, Further information about the Pat Ytsma [email protected] 610-398-0205 2011, from injuries sustatined after being Ride Safe Bike Tour for both participants Paul Smith................VP Touring struck while riding his bicycle on the and corporate sponsors can also be found [email protected] 570-360-2523 Fahy Bridge in Bethlehem.
    [Show full text]
  • Flexible Wheel Chair
    GRD Journals- Global Research and Development Journal for Engineering | Volume 1 | Issue 8 | July 2016 ISSN: 2455-5703 Flexible Wheel Chair Mahantesh Tanodi Department of Mechanical Engineering Hirasugar Institute of Technology, Nidasoshi, Karnataka (India) Sujata Huddar S. B. Yapalaparvi Department of Electrical and Electronics Engineering Department of Mechanical Engineering Hirasugar Institute of Technology, Nidasoshi, Karnataka Hirasugar Institute of Technology, Nidasoshi, Karnataka (India) (India) Abstract The wheelchair is one of the most commonly used assistive devices for enhancing personal mobility, which is a precondition for enjoying human rights and living in dignity and assists people with disabilities to become more productive members of their communities. For many people, an appropriate, well-designed and well-fitted wheelchair can be the first step towards inclusion and participation in society. When the need is not met, people with disabilities are isolated and do not have access to the same opportunities as others within their own communities. Providing wheelchairs that are fit for the purpose not only enhances mobility but begins a process of opening up a world of education, work and social life [1]. The development of national policies and increased training opportunities in the design, production and supply of wheelchairs are essential next steps. Every human being need to move from one place another to fulfill his requirements and to accomplish that requirements he will travel from one place to another place by walking which is a basic medium of transportation. But it is exceptional in case of physically disables (Persons don’t have both legs). In order to support and help such a person’s we designed a special manually lever operated wheel chair.
    [Show full text]
  • Dualdrive Ins Edfnldksv 12/02
    operating instructions betriebsanleitung notice d’utilisation handleiding brugsanvisning bruksanvisning These instructions contain important Please take particular note of the information on your DualDrive following: system. Precautionary measures, Cycling with DualDrive is easy. It’s which protect from possible true. It may surprise you just how accident, injury or danger to many features your DualDrive life, or which prevent possible system has. damage to the bicycle. To make the best possible use of your DualDrive please take the time to read these operating instructions Special advice to assist in carefully. the better handling of the operation, control and adjust- Your DualDrive system is almost ment procedures. maintenance-free. Should you have any queries that are not answered in these operating instructions, your qualified bicycle specialist will be © Copyright SRAM Corporation 2002 pleased to help you. Publ. No. 5000 E/D/F/Nl/Dk/Sv Information may be enhanced without prior notice. Have a nice time and enjoy Released December 2002 ”dualdriving”. SRAM Technical Documentation, Schweinfurt/Germany Shimano is a trademark of Shimano Inc., Japan. 2 DualDrive · December 2002 CONTENTS E THE DUALDRIVE SYSTEM 4 OPERATION 7 MAINTENANCE AND CARE » Gear adjustment 8 » Remove and fit rear wheel 10 » Cleaning and Lubrication 11 » Cable change 12 ASSEMBLY OF COMPONENTS 14 TECHNICAL DATA 18 ADDRESSES 110 DualDrive · December 2002 3 THE DUALDRIVE SYSTEM WHAT IS DUALDRIVE RIDING MODES The general perception is that shifting DualDrive has 3 intuitive shifting requires a Zen-like touch from years modes. Hill mode, standard mode, and of trial and error . mostly error. fast mode. Each mode is designed to Many riders wanted something allow the rider to be in the proper easier.
    [Show full text]
  • Design and Fabrication of Multi-Speed Bicycle Sprocket on CNC Milling Machine Adib Bin Rashid#1, M.A
    SSRG International Journal of Industrial Engineering (SSRG-IJIE) - Volume 7 Issue 2 - May - Aug 2020 Design and Fabrication of Multi-speed Bicycle Sprocket on CNC Milling Machine Adib Bin Rashid#1, M.A. Rashid Tipu*2 #Assistant Professor, Industrial and Production Engineering Department, Military Institute of Science and Technology, Mirpur Cantonment, Dhaka, Bangladesh *Managing Director, Mart Engineering and Consultancy Ltd, Dhaka, Bangladesh Abstract most common. British CEI (Cycle Engineers Institute) Now a day's cycling is a passion for the young thread was adopted as the international standard and generation of Bangladesh. Multi-speed bicycles are is now known as B.S.C. - British Standard Cycle and most preferable to them as it allows gear selection to is a standardized right-hand thread (1.375 x 24 TPI) suit the circumstances: a cyclist could use a high onto which a standard freewheel is screwed. This gear when cycling downhill, a medium gear when allows different brands of freewheels to be mounted cycling on a flat road, and a low gear when cycling on different brands of hubs. uphill. On a Multi-speed bicycle, the cogset or cluster Cassettes are distinguished from freewheels in that a is the set of multiple sprockets that attaches to the cassette has a series of straight splines that form the hub on the rear wheel to provide multiple gear ratios mechanical connection between the sprockets and the to the rider. Manufacturing of sprocket in an cassette compatible hub, called a freehub, which accurate dimension is a challenge to the cycle contains the ratcheting mechanism. The entire manufacturing industry.
    [Show full text]
  • 2013 Catalog
    1 www.surlybikes.com 1-877-743-3191 AND NOW A WORD FROM THE BIG GIANT HEAD In the last 100 years technology has striven to improve upon the functionality of steel as a building material (as they have the vinyl record for entertainment and wool for clothing). One school of thought has been obsessed with creating new materials that solve problems in a different ways (aluminum, titanium, carbon fiber). From our point of view this adds endless layers of complexity and often creates new problems along the way. Another school has spent its time refining and improving the original material, arriving at what is modern steel…it is for the most part the same stuff your grand daddy rode, just stronger, lighter, and more refined to specific purposes. Surly is of this second school; we like to use technology to improve the wheel, not reinvent it. We like the refinement process. We don’t use new technologies for the sake of using new technologies, but rather look at what we want to achieve and apply what works, whether its new or not. That’s why we make our bikes out of steel. It’s not because we are old fashioned, or curmudgeonly (though many of us are in fact curmudgeons). We’re not retrogrouch crusaders. We use steel because it works consistently and inexpensively. It’s not that other materials aren’t cool. We are interested and intrigued by the properties of all the things that make up our world. But for the kind of bikes we make, for the rides we like and the things we value, steel can’t be beat.
    [Show full text]
  • Getting Started
    Cyclocross-Ch1-3.qxd 8/8/07 10:40 PM Page 15 CHAPTER 1 Getting Started A bike, a helmet, and a license are all you need to race, and there are plenty of successful racers who started their careers with nothing more than that. It helps, though, to have some guidance. Getting involved with a cycling club that already has members com- peting is a good first step to take on your way to racing ’cross. It is pos- sible to go it alone and join your national federation as an individual, but in a club or team you will be exposed to good advice and gain other benefits that will help speed your progress. If you can find a club or team in your local area that has an interest in ’cross, then so much the better; perhaps it already promotes a race or has a team who travels to- gether to races. Whatever the case, if you can get involved with some- body who knows about ’cross, it will save you a lot of the time you would otherwise spend learning the ropes and organizing everything on your own. If you are unsure how to find a club, contact your na- tional cycling federation, which can provide you with a list of clubs in your area. Failing that, try your local bike shop; the owners or employ- ees of reasonably good shops usually know what is going on locally. If you intend to compete in any large races or hope to compete abroad, you will need a racing license.
    [Show full text]
  • 090194 HASZNÁLATI +GAR GEPIDA ANGOL Belív .Cdr
    1 2 3 4 5 6 7 8 Saddle Handlebar Seatpost Stem Seatpost clamp Headset Carrier Frame Rear light Front light V-brake Fork Rear reflector prism Disc brakes Cassette Fender Disc brake Front derailleur Quick-release Hub dynamo Rear derailleur Quick-release Chain Pedals Wheels Wheels Drive train Wheel rim Wheel rim Tire with reflective strip Tire with reflective strip 1 2 3 4 5 6 7 8 ENGLISH 1 General advice regarding the user guide and warranty booklet 03 Cantilevered brake, V-brake 18 Legislative provisions and information 04 Hydraulic brakes 18 Personalised bicycle settings 5 Disc brakes 19 General safety advice 05 Rim brakes 29 Technical inspection procedure 06 Maintenance and replacement of brake pads 20 Maintenance overview 70 Headset 20 0 Traditional headset 20 Checking the play and free rotation of the headset 21 Adjusting a traditional headset 21 2 “A-head” headset 21 General guidance on assembly and safety 8 Steering 8 Adjusting the height of a quill stem 8 3 Adjusting the height of an “A-Head” stem 9 Wheels 22 Stems with adjustable angle 10 Spokes 22 Saddle and seatpost 10 Rims 23 Saddle 11 Hubs 23 Adjusting the height of the saddle 11 Rubber tire, inner tube, air pressure 24 Spring seatpost 11 Valve types 24 Pedals 12 Drivetrain system 12 Derailleurs 13 4 External derailleur gear systems 13 Frame and fork 25 Derailleur gear systems: control and readjustment 14 Frame 25 Checking and adjusting the stopping points on shifters 15 Fork 25 Front derailleur 15 Telescopic forks 25 Fine-tuning 15 Setting the telescopic forks 26 Hub gear 16
    [Show full text]
  • Beaumont USER’S MANUAL • STEP-THRU 48V/500W User’S Manual Electric Bike
    Beaumont USER’S MANUAL • STEP-THRU 48V/500W User’s Manual Electric Bike List of E-Bike Component Names Congratulations on your purchase of this Retrospec electric bike. It has been carefully designed and manufactured to the latest international quality standards. Please read this instruction manual carefully and thoroughly before riding. It contains important information on safety, and maintenance. It is the owner’s responsibility to read this manual before riding. Keep this manual for future reference. This user’s instruction manual includes two sections: SECTION I - Mechanical Operation, and SECTION II - Electric Operation. These instructions apply to electric bike models with following equipment: Section I: Mechanical Components Operation • Derailleur with Disc Brakes For mechanical equipment, an electric bicycle differs slightly from a non-electric bike. Section II: Electrical Components Operation • The battery-pack mounted in the rear carrier or on the down tube • The motor in the rear wheel hub or front wheel hub • The controller box next to the battery or integrated into the battery-pack • Handlebar-mounted Display Panel operations. Warranty: Should any original component prove defective in terms of workmanship within its warranty period, we will replace it. Warranty period for Retrospec electric bikes is as follows: Electrical Components excluding Battery: 2 years with proper maintenance Fig. 1 Electric Bicycle with Carrier Pack Battery: 1 year Frame and Fork: 1 year All other components: 6 months 1. Tire & Tubes 17. Chain This warranty does not include labor and transportation charges. The company cannot 2. Rims 18. Rear Derailleur accept any responsibility for consequential or special damage.
    [Show full text]
  • A Guide to Adjusting Gears
    Tweaking the gear changes using the barrel adjuster On the rear derailleur: A Guide to Adjusting Gears • Shift into the highest gear (smallest cog) • Whilst slowly turning the pedals/cranks, shift the rear derailleur up gradually to the lowest gear (largest cog), and then back down again. How Gears Work Low & High Gears • If the cable tension is correct, and the cable is not rusted or gunked up, the chain When you change gear using Your bike is in the lowest gear when it’s easiest to pedal. should move smoothly from cog to cog: the shifter on the handlebars, it increases or decreases the tension You would shift into your low gear when cycling up a • If the chain is reluctant, rattles, rubs on the derailleur or is unsettled when shifting up into a of the gear cable, which in turn steep hill. The lowest gear is when the chain is on the larger cog, check the cable moves freely, and if this is the case: moves the derailleur. smallest cog on the front and the largest cog on the rear. • Shift onto into the problematic gear on the shifter. Then gradually unscrew the barrel adjuster, The derailleur moves the chain The highest gear is when it’s hardest to pedal, this will which increases cable tension, turning the pedals/cranks as you do so, until the chain sits from gear cog to gear cog making move your bike at a fast speed if cruising along on the smoothly in the correct gear. it easier or harder to pedal.
    [Show full text]
  • List of Bicycle Parts
    List of bicycle parts Bicycle parts For other cycling related terms (besides parts) see Glossary of cycling. List of bicycle parts by alphabetic order: Axle: as in the generic definition, a rod that serves to attach a wheel to a bicycle and provides support for bearings on which the wheel rotates. Also sometimes used to describe suspension components, for example a swing arm pivot axle Bar ends: extensions at the end of straight handlebars to allow for multiple hand positions Bar plugs or end caps: plugs for the ends of handlebars Basket: cargo carrier Bearing: a device that facilitates rotation by reducing friction Bell: an audible device for warning pedestrians and other cyclists Belt-drive: alternative to chain-drive Bicycle brake cable: see Cable Bottle cage: a holder for a water bottle Bottom bracket: The bearing system that the pedals (and cranks) rotate around. Contains a spindle to which the crankset is attached and the bearings themselves. There is a bearing surface on the spindle, and on each of the cups that thread into the frame. The bottom bracket may be overhaulable (an adjustable bottom bracket) or not overhaulable (a cartridge bottom bracket). The bottom bracket fits inside the bottom bracket shell, which is part of the bicycle frame Brake: devices used to stop or slow down a bicycle. Rim brakes and disc brakes are operated by brake levers, which are mounted on the handlebars. Band brake is an alternative to rim brakes but can only be installed at the rear wheel. Coaster brakes are operated by pedaling backward Brake lever:
    [Show full text]
  • Bicycle Fast Fixes
    Bicycle Fast Fixes You probably already know that bicycles are awesome; they are good for getting around town, good for exercise, good for the environment, and just plain good fun to ride. How about doing a Fast Fix Project that helps users keep their bicycles in good repair and on the road where they belong? There are plenty of other things you can fix on a bike, so feel free to propose a bicycle fix that you don’t see here. Just be sure that your proposed fix isn’t already documented on our site. Since parts are different for each make and model, you can search to see if, for example, there is a rear derailleur guide for the "Shimano Tiagra RD-4703" or whatever component you are proposing to work on. If you have any questions about the terminology used, check out Sheldon Brown’s Bicycle Glossary, Park Tool’s Repair Help Resource, or Jim Langley’s Parts Diagram. These resources can help you identify any bike part, old or new. Tires, Wheels & Hubs Brakes • How to fix a flat tire • How to replace mountain brake levers • How to replace a tubular tire • How to replace brake levers on a road bike • How to fix a flat tubeless tire • How to fix squealing disc brakes • How to replace a tubeless tire • How to fix squealing rim brakes • How to fix a flat without removing the wheel • How to replace disc brake pads (may be • How to tighten loose spokes manufacturer-specific) • How to fix a broken spoke • How to replace disc brake rotor (may be • How to fix rim brake rub manufacturer-specific) • How to true a bicycle rim • How to adjust disc brake alignment • How
    [Show full text]
  • Rear Cogs to Each Other, Without Regard to the Bike Centerline
    Table Of Contents Derailleur Systems Front Derailleur Adjustments Rear Derailler Adjustments (derailleur) Rear Derailleur Overhaul Cutting Cable Housing Shift Levers (shifters) Chain Line Bar End Shifter Service Shift Housing Length Bottom Brackets Cartridge Bearing Type Bottom Bracket Service (BBT) Brake Service Linear Pull Brake Service (V- brake style) Housing Length Brake Levers Cassette and Freewheel Service Cassette and Freewheel Removal Crank Service Crank Installation and Removal- Square Spindle Type Removal of Cranks with Damaged Threads (square type only) Trouble Shooting a Creaky or Noisy Drive Train Headset Service Threadless Headset Service Star Fangled Nut Installation Chain repair and service Chain Installation- derailleur bikes Chain Length Sizing Tire and Inner Tube Service Inner Tube Repair Tire and Tube Removal and Installaton Miscellaneous Bike Washing and Cleaning Common Tools Derailleur Systems Front Derailleur Adjustments Useful Tools and Supplies Repair Stand, holds bike secure for easy work. Hex wrenches as needed. Screwdriver (#2 Phillips or straight blade) Light liquid lubricant Derailleur cable inner wire and housing as needed Caliper or metric ruler Cable end caps and housing end caps as needed Rags This article will discuss the basic adjustment of the front derailleur. See also related articles: This article assumes the derailleur is compatible with the shifting system and is not extremely worn out. Cable and housing length is not covered in the article, see How do I cut cable and housing and how long should housing be? Service Procedures The front derailleur simply shoves the chain off one front chain ring and onto another ring. The cage surrounding the chain is pulled in one direction by the inner wire.
    [Show full text]