DOCSLIB.ORG

NT8D09 Analog Message Waiting Line Card

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
NT8D09 Analog Message Waiting Line Card Meridian 1 Line Cards Description Document Number: 553-3001-105 Document Release: Standard 7.00 Date: January2002 Year Publish FCC TM Copyright © 1994 – 2002 Nortel Networks All Rights Reserved Printed in Canada Information is subject to change without notice. Nortel Networks reserves the right to make changes in design or components as progress in engineering and manufacturing maywarrant. This equipment has been tested and found to complywith the limits for a Class A digital device pursuant to Part 15 of the FCC rules, and the radio interference regulations of IndustryCanada. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequencyenergy,and if not installed and used in accordance with the instruction manual, maycause harmful interference to radio communications. Operation of this equipment in a residential area is likelyto cause harmful interference in which case the user will be required to correct the interference at their own expense. SL-1 and Meridian 1 are trademarks of Nortel Networks. Line Cards Description 4 Page3of226 Revision history January 2002 Standard 7.00. This document is up-issued to include content changes for Meridian 1 Internet Enabled Release 25.40. April 2000 Standard 6.00. This is a global document and is up-issued for X11 Release 25.0x. Document changes include removal of: redundant content; references to equipment types except Options 11C, 51C, 61C, and 81C; and references to previous software releases. June 1999 Standard, release 5.00. October 1997 Standard, release 4.00. This document is reissued to include the NT5D60AA CLASS Modem Card (XCMC). August 1996 Standard, release 3.00. This document is reissued to include the NT5D11 Line-side T1 Interface Card. July 1995 Standard, release 2.00. This document is reissued to incorporated technical corrections. Line Cards Description Page 4 of 226 December 1994 Standard, release 1.00. This is the initial release of this document. It supersedes: • NT8D02 Digital Line Card description (553-3001-162) • NT8D09 Analog Message Waiting Line Card description (553-3001-163) • 500/2500 line cards description and operation (553-2201-183) • QPC578 Integrated Services Digital Line Card description (553-2201-193) This document also contains information on the new NT1R20 Off-premise Station Analog Line Card. 553-3001-105 Standard 7.00 January2002 8 Page5of226 Contents Aboutthisdocument....................... 9 Referencelist............................................ 9 Description............................... 11 Contents................................................ 11 Overview ............................................... 12 Selectalinecard ......................................... 13 Installation .............................................. 16 Operation ............................................... 17 Voicefrequencyaudiolevel................................. 42 Off-premiselineprotection ................................. 42 NT1R20 Off-Premise Station Analog Line Card . 47 Contents................................................ 47 Referencelist............................................ 48 Introduction ............................................. 48 Physicaldescription....................................... 48 Functionaldescription ..................................... 51 Cardfunctions ........................................... 52 Electricalspecifications.................................... 54 Connectorpinassignments.................................. 57 ConfiguringtheOPSanaloglinecard......................... 59 Applications............................................. 63 Line Cards Description Page 6 of 226 Contents NT5D11Line-sideT1InterfaceCard .......... 69 Contents................................................ 69 Referencelist............................................ 70 Introduction............................................. 70 Physicaldescription....................................... 70 Functionaldescription..................................... 75 Electricalspecifications.................................... 80 InstallationandConfiguration............................... 81 Man-Machine T1 maintenance interface software . 100 Applications............................................. 119 NT5D33 and NTRB34 Line-side E1InterfaceCards ......................... 125 Contents................................................ 125 Referencelist............................................ 126 Introduction............................................. 126 Physicaldescription....................................... 126 Functionaldescription..................................... 131 Electricalspecifications.................................... 135 InstallationandConfiguration............................... 137 Installation.............................................. 144 Man-Machine E1 maintenance interface software . 155 NT5D60AA CLASS Modem Card (XCMC) . 185 Contents................................................ 185 Referencelist............................................ 185 Introduction............................................. 185 Physicaldescription....................................... 186 Functionaldescription..................................... 186 Electricalspecifications.................................... 189 Configuration............................................ 190 553-3001-105 Standard 7.00 January2002 Contents Page7of226 NT8D02DigitalLineCard ................... 191 Contents................................................ 191 Referencelist............................................ 191 Introduction ............................................. 192 Physicaldescription....................................... 192 Functionaldescription ..................................... 194 Electricalspecifications.................................... 199 Connectorpinassignments.................................. 201 Configuration............................................ 203 NT8D09 Analog Message Waiting Line Card . 205 Contents................................................ 205 Referencelist............................................ 206 Introduction ............................................. 206 Physicaldescription....................................... 207 Functionaldescription ..................................... 209 Electricalspecifications.................................... 213 Connectorpinassignments.................................. 216 Configuration............................................ 218 Index .................................... 221 Listofterms.............................. 227 Line Cards Description Page 8 of 226 Contents 553-3001-105 Standard 7.00 January2002 10 Page9of226 About this document This document is a global document. Contact your system supplier or your Nortel Networks representative to verify that the hardware and software described is supported in your area. This document outlines the functions, specifications, applications, and operation of the various Meridian 1 line cards. This information is intended to be used as a guide when connecting the line cards to customer-provided station equipment. Reference list See the Meridian 1 System planning and engineering guide for • System Engineering (553-3001-151) • Spares Planning (553-3001-153) • Equipment Identification (553-3001-154) • Summary of Transmission Parameters (553-2201-182) See the Meridian 1 System installation and maintenance guide for • System Installation Procedures (553-3001-210) • Circuit Card: Installation and Testing (553-3001-211) • General Maintenance Information (553-3001-500) • Fault Clearing (553-3001-510) • Hardware Replacement (553-3001-520) Line Cards Description Page 10 of 226 About this document See the following software guides for an overview of software architecture, procedures for software installation and management, and a detailed description of all features and services. This information is contained in two documents: • System Management (553-3001-300) • Features and Services (553-3001-306) See the Administration (553-3001-311) for a description of all administration and maintenance programs, and System Messages Guide (553-3001-411) for information about system messages. 553-3001-105 Standard 7.00 January2002 46 Page 11 of 226 Description Contents This section contains information on the following topics: Overview................................................ 12 Selectalinecard.......................................... 13 Intelligentperipheralequipmentlinecards.. ................. 14 Installation............................................... 16 Operation................................................ 17 Hostinterfacebus....................................... 17 Analoglineinterfaceunits................................ 23 Digitallineinterfaceunits.. .............................. 26 Analoglinecalloperation.. .............................. 27 Digitallinecalloperation................................. 34 Line-sideT1calloperation................................ 34 Voicefrequencyaudiolevel................................. 42 Off-premiselineprotection.................................. 42 Lineprotectors......................................... 43 Lineprotectiongrounding.. .............................. 44 Lineandtelephonecomponents............................ 45 Reference list The following are the references in this section: • System Engineering (553-3001-151) • System Installation
Load more

Recommended publications
  • Telephone Switching
    NATIONAL UNIVERSITY OF ENGINEERING COLLEGE OF ELECTRICAL AND ELECTRONICS ENGINEERING TELECOMMUNICATIONS ENGINEERING PROGRAM IT535 – TELEPHONE SWITCHING I. GENERAL INFORMATION CODE : IT535 – Telephone Switching SEMESTER : 9 CREDITS : 03 HOURS PER WEEK : 04 (Theory – Practice) PREREQUISITES : IT515 – Telecommunications III CONDITION : Mandatory II. COURSE DESCRIPTION The purpose of this course is to provide the student with the knowledge about the evolution and development of the telephony for the analog and digital switching systems, including the hardware and software of different telephone systems, integration of technologies such as ATM and IP including Voice over IP (VoIP) and photonic switching technologies. III. COURSE OUTCOMES At the end of the course the student will: Know the criteria for the design of analog and digital telephone switching systems. Know the operation and use of software and hardware used in different telephone systems. Know how to integrate technologies such as ATM and IP over classic telephone systems. IV. LEARNING UNITS 1. INTRODUCTION Communication channels. Switching channels. Networks of POTS (Plain Old Telephone Service). The Telecommunications Industry. Evolution of technology, Evolution of architecture. Evolution of telephone systems. 2. LINES AND TRUNKS Lines. The telephone. Subscriber signaling. Telephone exchange. Subscriber extension Functions per line. Trunks: Network hierarchy between telephone switching centers. Trunks Trunk circuits. Signaling between telephone switching centers. 3. TRAFFIC ENGINEERING Traffic measurements. Network management. Quality of telephone service. Telephone demand projections. Routing plan. Interconnection of telephone switching centers. 4. PUBLIC AND PRIVATE ANALOG SWITCHING Analog switching Architecture. Line Finders. Selectors. Crossbar. Block of lines Trunk blocks. Call progression, call routing. 1 5. PUBLIC AND PRIVATE DIGITAL SWITCHING SYSTEMS Concepts of pulse code modulation (PCM).
    [Show full text]
  • Data Communications Via Powerlines I I (B) (3)-P.L
    UNCLASSIFIED Cryptologic Quarterly Data Communications Via Powerlines I I (b) (3)-P.L. 86-36 The author is a member ofNSA Cohort 11 at bine, such as in nuclear- or coal-powered electric the Joint Military Intelligence College. Many of power plants, or a low-speed turbine, such as is the ideas presented in this paper were developed used in hydroelectric power plants). The power is as a class research paper at the Joint Military transferred to the transmission system via a volt­ Intelligence College. age step-up transformer.3 Typical voltages in this The views expressed in this paper are those of stage range from 138 kV to 500 kV or more. Bulk the author and do not reflect the official policy power is delivered from the generating plants via or position of the Department of Defense or the this intercity transmission system (which can U.S. government. span several states) to the transmission substa­ tions where the power is transferred to a sub­ The hunger for increased bandwidth is driv­ transmission system whose voltages range from ing individuals, corporations, and organizations 38 kV to 138 kV; power transference is made via to seek new methods for delivering Internet serv­ a step-down transformer. The subtransmission ice to customers. Many of these methods are well system delivers the high voltage throughout a city known: radio-frequency (or wireless) communi­ or large region. Power is delivered to the con­ cations (such as the IEEE 802.11 Wireless LAN, sumers via the distribution system. Transference Bluetooth, and the HomeRF and SWAP from the subtransmission system to the distribu­ Protocols), infrared communications (IrDA), tion system is made within regions called distri­ fiber-optic channels, high-speed telephone con­ bution substations, likewise using step-down nections (such as DSL and ISDN or the more transformers.
    [Show full text]
  • Mediatrix G7 Series Datasheet
    ediatrix G7 Series The Mediatrix G7 Series is a reliable and secure VoIP Analog Adaptor and Media Gateway platform for SMBs. Featuring PRI, FXS, and FXO interfaces; the Mediatrix G7 Series provides the best solution to connect legacy equipmentedia to cloud telephonytrix services and IP PBX systems to PSTN landlines. Widely interoperable with SIP softswitch and IMS vendors, the Mediatrix G7 Series provides transparent integration of legacy PBX systems for SIP Trunking and PSTN replacement applications. Interconnects any device to SIP Highly reliable Fax and Modem Transmissions over IP The Mediatrix G7 Series links any analog or digital With T.38 and clear channel fax and modem pass-through connection to an IP network and delivers a rich capabilities, the Mediatrix G7 Series ensures seamless feature set for a comprehensive VoIP solution. transport of voice and data services over IP networks. PSTN access and legacy PBX system gateway Advanced Mass Management With FXS, FXO, configurable NT/TE PRI ports, local Our advanced provisioning capabilities deliver call switching, and user-defined call properties remarkable benefits to Mediatrix customers. (including caller/calling ID), Mediatrix G7 Series Mediatrix enables centralised CPE management, a gateways smoothly integrate into legacy PBXs and definite advantage to monitor the network, ensure incumbent PSTN networks. service, and reduce operational costs. ediatrix G7 Series Applicationsediatrix Operators ✓ Connect legacy equipment in PSTN replacement/TDM replacement projects ✓ Provide SIP termination
    [Show full text]
  • Global Call E1/T1 CAS/R2 Technology Guide
    Global Call E1/T1 CAS/R2 Technology Guide July 2005 05-2445-001 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. This Global Call E1/T1 CAS/R2 Technology Guide as well as the software described in it is furnished under license and may only be used or copied in accordance with the terms of the license. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Intel Corporation. Intel Corporation assumes no responsibility or liability for any errors or inaccuracies that may appear in this document or any software that may be provided in association with this document. Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without express written consent of Intel Corporation.
    [Show full text]
  • On Common Channel Signaling Number 7 and Its Comparison with Multi-Frequency Coded Signaling and Internet Protocol
    International Journal of Electronics and Communication Engineering. ISSN 0974-2166 Volume 5, Number 2 (2012), pp. 125-132 © International Research Publication House http://www.irphouse.com On Common Channel Signaling Number 7 and its Comparison with Multi-Frequency Coded Signaling and Internet Protocol Md. Shah Alam1 and Md. Rezaul Huque Khan2 Dept. of Applied Physics, Electronics and Communication Engineering, University of Chittagong, Bangladesh 1 2 E-mail: [email protected], [email protected] Abstract A message based comparative study between signaling system #7(SS7) and R2 Signaling is done. The reasons for the transition from Multi-frequency Coded (MFC) Signaling to SS7 and SS7 to Internet Protocol are also discussed. Keywords: Common Channel Signaling No.7 (CCS7), R2 signaling or Multi- frequency Coded (MFC) signaling, Internet Protocol (IP), Advance Intelligent Network (AIN). Introduction The over increasing demand of telecommunication in the world wide significantly involves telecommunication signaling systems. The Common Channel Signaling no.7 is usually termed as Signaling System No.7 (SS7). The purpose of this paper is to study the signaling systems R2 or MFC, SS7 [1] and IP, to find the limitations of the above signaling system, analysis of the signaling systems (R2 and SS7) on the basis of their message format. An overall comparison between the two systems has been studied. This paper also focuses on the transition of MFC to SS7. A distinction is made between SS7 and IP and finally reasons are shown why SS7 is moving towards IP. Common Channel Signaling No. 7 Common Channel Signaling System No. 7 (i.e., SS7 or C7) is a global standard for telecommunications defined by the International Telecommunication Union (ITU) Telecommunication Standardization Sector (ITU-T).
    [Show full text]
  • Design of an ISDN Central Office, U-Interface Timothy N
    Iowa State University Capstones, Theses and Retrospective Theses and Dissertations Dissertations 1991 Design of an ISDN central office, U-interface Timothy N. Toillion Iowa State University Follow this and additional works at: https://lib.dr.iastate.edu/rtd Part of the Digital Circuits Commons, Digital Communications and Networking Commons, and the Signal Processing Commons Recommended Citation Toillion, Timothy N., "Design of an ISDN central office, U-interface" (1991). Retrospective Theses and Dissertations. 16968. https://lib.dr.iastate.edu/rtd/16968 This Thesis is brought to you for free and open access by the Iowa State University Capstones, Theses and Dissertations at Iowa State University Digital Repository. It has been accepted for inclusion in Retrospective Theses and Dissertations by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. Design of an ISDN central office, U-interface by Timothy N. Toillion A Thesis Submitted to the Graduate Faculty in Partial Fulfillment of the Requirements for the Degree of MASTER OF SCIENCE Department: Electrical Engineering and Computer Engineering Major: Computer Engineering Signatures have been redacted for privacy Signatures have been redacted for privacy Iowa State University Ames, Iowa 1991 Copyright @ Timothy N. Toillion, 1991. All rights reserved. 11 TABLE OF CONTENTS INTRODUCTION. .. 1 CHAPTER 1. THE EVOLUTION OF TELECOMMUNICATIONS 4 Telephone Communications .. 4 Inventions Spawn Growth 4 Modern Telecommunication Networks. 8 Telecommunications ......... 11 Definition of Telecommunication. 11 Other Forms of Telecommunication 11 Integration of Services . 12 Evolution of the Concept . 12 The Evolution of ISDN .. 15 CCITT's Standards . 15 Major Set back. 16 Evolution of Products and Services 16 CHAPTER 2.
    [Show full text]
  • Omnix: an Open Peer-To-Peer Middleware Framework
    Omnix: An Open Peer-to-Peer Middleware Framework Engineering Topology- and Device-Independent Peer-to-Peer Systems Ph.D. Thesis Roman Kurmanowytsch DISSERTATION Omnix: An Open Peer-to-Peer Middleware Framework Engineering Topology- and Device-Independent Peer-to-Peer Systems ausgefuhrt¨ zum Zwecke der Erlangung des akademischen Grades eines Doktors der technischen Wissenschaften unter der Leitung von o.Univ.-Prof. Dipl.-Ing. Dr.techn. Mehdi Jazayeri Institut fur¨ Informationssysteme Abteilung fur¨ Verteilte Systeme (E184-1) eingereicht an der Technischen Universitat¨ Wien Fakultat¨ fur¨ Informatik von Univ.-Ass. Dipl.-Ing. Roman Kurmanowytsch [email protected] Matrikelnummer: 9327324 Brunnerstr. 28/12 A-1230 Wien, Osterreich¨ Wien, im Februar 2004 Omnix: An Open Peer-to-Peer Middleware Framework Engineering Topology- and Device-Independent Peer-to-Peer Systems Ph.D. Thesis at Vienna University of Technology submitted by Dipl.-Ing. Roman Kurmanowytsch Distributed Systems Group, Information Systems Institute, Technical University of Vienna Argentinierstr. 8/184-1 A-1040 Vienna, Austria 1st February 2004 c Copyright 2004 by Roman Kurmanowytsch Advisor: o. Univ.-Prof. Dr. Mehdi Jazayeri Second Advisor: a.o. Univ.-Prof. Dr. Gabriele Kotsis Abstract In this thesis, we present Omnix, a Peer-to-Peer (P2P) middleware framework. P2P mid- dleware provides an abstraction between the application and the underlying network by pro- viding higher-level functionality such as distributed P2P searches and direct communication among peers. P2P networks build an overlay network, a network on the network. The central idea of this dissertation is to apply the well-established ISO OSI layered model on P2P middleware systems. A layered P2P architecture helps to identify separate parts of a complex system, allows changes to the system without affecting other layers and makes maintenance easier due to modularization.
    [Show full text]
  • Voice/Fax Over IP Networks Model MVP400 H.323 Mode User Guide
    Voice/Fax Over IP Networks Model MVP400 H.323 Mode User Guide User Guide S0000008 Revision C MultiVOIP 400 (Model MVP400) This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi- Tech Systems, Inc. All rights reserved. Copyright © 2001 by Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes. Record of Revisions Revision Description A Added H.323 protocol support; covers software version 3.50. All pages at revision A. (6/5/00) B Manual updated for software version 3.51. (1/24/01) C Removed references to MultiVOIP 800 (12/26/01) Patents This Product is covered by the following U.S. Patent Numbers: 6151333, 5757801, 5682386. Other Patents Pending. TRADEMARK Multi-Tech and the Multi-Tech logo are registered trademarks and MultiVOIP is a trademark of Multi-Tech Systems, Inc. Adobe Acrobat is a trademark of Adobe Systems Incorporated. Microsoft Windows, Windows 2000, Windows 98, Windows 95, Windows NT, and NetMeeting are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Multi-Tech Systems, Inc. 2205 Woodale Drive Mounds View, Minnesota 55112 (763) 785-3500 or (800) 328-9717 Fax 763-785-9874 Technical Support (800) 972-2439 Internet Address: http://www.multitech.com Contents Chapter 1 - Introduction and Description ....................................................
    [Show full text]
  • Message Based Analysis on Signaling System Number 7 and Its Comparison with Multi- Frequency Coded Signaling
    DAFFODIL INTERNATIONAL UNIVERSITY JOURNAL OF SCIENCE AND TECHNOLOGY, VOLUME 7, ISSUE 1, JANUARY 2012 15 MESSAGE BASED ANALYSIS ON SIGNALING SYSTEM NUMBER 7 AND ITS COMPARISON WITH MULTI- FREQUENCY CODED SIGNALING Md. Shah Alam1 and Mohammad Rezaul Huque Khan2* Dept. of Electronics and Telecommunication Engineering, Daffodil International University, Bangladesh E-mail: [email protected], [email protected] Abstract: A message based comparative study (і) Basic call setup, management, and tear between signaling system #7(SS7) and MFC Signaling down. is done. Here the limitations of SS7 and MFC (ii) Wireless services such as Personal signaling are also studied. The reasons for the transition from Multi-frequency Coded (MFC) Communications Services (PCS), wireless Signaling to SS7 has been discussed. roaming, and mobile subscriber authentication. Keywords: Common Channel Signaling No.7 (CCS7), R2 (iii) Local Number Portability (LNP). Signaling or Multi-frequency Coded (MFC) Signalin and, (iv) Toll-free (800/888) and toll (900) wireline SS7 message. services. (v) Enhanced call features such as call 1. Introduction waiting, call forwarding, calling party The over increasing demand of name/number display/ restriction/rejection, telecommunication in the world wide and three-way calling. significantly involves telecommunication (vi) Interaction with Network Databases and signaling systems. The Common Channel Service Control Points (SCP) for service Signaling no.7 is usually termed as Signaling control. System No.7 (SS7). The purpose of this paper is (vii) Handling congestion and priorities. to study the signaling systems R2 or MFC, SS7 (viii) Efficient and secure worldwide [1], to find the limitations of the above signaling telecommunications. system, analysis of the signaling systems (R2 SS7 started to make inroads in the 1980‟s and SS7) on the basis of their message format.
    [Show full text]
  • Evolution of Telecommunication Protocols
    Boris S. Goldstein EVOLUTION OF TELECOMMUNICATION PROTOCOLS SaintPetersburg 2002 01 - Title.p65 1 16.10.2002, 14:32 621.387 G64 Boris S. Goldstein. Evolution of Telecommunication Protocols. ISBN 5820601068 The monograph "Evolution of Telecommunication Protocols" is devoted to a wide range of questions related to signaling protocols in telephone networks of former USSR Public Switched Telephone Networks. The SDLoriented analysis method enabling the description in a relatively simple way of the specifics of interoffice signaling systems and call handling procedures, as well as specifications and scenarios required for designing is discussed. The evolution of Russian interoffice signaling systems, from threewire trunks and so called "R 1.5" to Signaling System No.7 protocols is considered. All engineering solutions are directed toward uptodate digital switching nodes and exchanges. The book is primarily intended for engineers and scientists involved in the research, development, and operation of switching nodes. The book will be a valuable reference source for students and post graduates studying in these areas. Technical edition All right reserved. Copyright © Boris S. Goldstein 2002 No part of this publication may be reproduced or distributed in any form or by any means, or stored in a data base or retrieval system, without written permission of the author. All terms mentioned in this book that are known to be trademarks or service marks have been appropriatery capitalized. Use of a term in the book should not be regarded as affecting the validity of any trademark or service mark. Produced in Russian Federation 01 - Title.p65 2 16.10.2002, 14:32 Contents Preface ...................................................................................
    [Show full text]
  • Fundamentals of Telecommunications
    Fundamentals of Telecommunications. Roger L. Freeman Copyright 1999 Roger L. Freeman Published by John Wiley & Sons, Inc. ISBNs: 0-471-29699-6 (Hardback); 0-471-22416-2 (Electronic) Fundamentals of Telecommunications WILEY SERIES IN TELECOMMUNICATIONS AND SIGNAL PROCESSING John G. Proakis, Editor Northeastern University Introduction to Digital Mobil Communications Yoshihiko Akaiwa Digital Telephony, 2nd Edition John Bellamy Elements of Information Theory Thomas M. Cover and Joy A. Thomas Fundamentals of Telecommunications Roger L. Freeman Practical Data Communications Roger L. Freeman Radio System Design for Telecommunications, 2nd Edition Roger L. Freeman Telecommunication System Engineering, 3rd Edition Roger L. Freeman Telecommunications Transmission Handbook, 4th Edition Roger L. Freeman Introduction to Communications Engineering, 2nd Edition Robert M. Gagliardi Optical Communications, 2nd Edition Robert M. Gagliardi and Sherman Karp Active Noise Control Systems: Algorithms and DSP Implementations Sen M. Kuo and Dennis R. Morgan Mobile Communications Design Fundamentals, 2nd Edition William C. Y. Lee Expert System Applications for Telecommunications Jay Liebowitz Digital Signal Estimation Robert J. Mammone, Editor Digital Communication Receivers: Synchronization, Channel Estimation, and Signal Processing Heinrich Meyr, Marc Moeneclaey, and Stefan A. Fechtel Synchronization in Digital Communications, Volume I Heinrich Meyr and Gerd Ascheid Business Earth Stations for Telecommunications Walter L. Morgan and Denis Rouffet Wireless Information Networks Kaveh Pahlavan and Allen H. Levesque Satellite Communications: The First Quarter Century of Service David W. E. Rees Fundamentals of Telecommunication Networks Tarek N. Saadawi, Mostafa Ammar, with Ahmed El Hakeem Meteor Burst Communications: Theory and Practice Donald L. Schilling, Editor Vector Space Projections: A Numerical Approach to Signal and Image Processing, Neural Nets, and Optics Henry Stark and Yongyi Yang Signaling in Telecommunication Networks John G.
    [Show full text]
  • Session Management in Advanced Telecommunication Services - Anand Ranganathan, Dipanjan Chakraborty
    TELECOMMUNICATION SYSTEMS AND TECHNOLOGIES - Vol. II - Session Management in Advanced Telecommunication Services - Anand Ranganathan, Dipanjan Chakraborty SESSION MANAGEMENT IN ADVANCED TELECOMMUNICATION SERVICES Anand Ranganathan IBM T.J. Watson Research Center, USA Dipanjan Chakraborty IBM India Research Lab, India Keywords: Sessions, PSTN, SS7, H.323, SIP. Contents 1. Introduction 2. Overview of Session Maintenance in Circuit Switched Networks (PSTN) 2.1. ISDN Session Channels 2.2. Common Channel Signaling System Number 7 (SS7) 2.2.1. SS7 Architecture Overview 2.2.2. Relationship to OSI Stack and Layer Overview 2.2.3. Signaling Connection Control Part (SCCP) and User Parts 2.2.4. Performance Parameters 2.2.5. SS7 Signals over the Internet 3. Session Maintenance in Packet Switched Networks 3.1. Gateways 3.2. Major Hurdles in Reaching Circuit-switched Standards 3.3. H.323 Primer 4. Session Maintenance in wired and wireless networks: Session Initiation Protocol 4.1. Overview of SIP Functionality 4.2 Why SIP? 4.3. SIP Network Elements 4.4. SIP Operation 4.4.1. Basic Call Setup (Initiating a Session) 4.4.2. SIP Registration 4.5. SIP Extensions 4.6. ComparisonUNESCO of SIP with H.323 – EOLSS 5. Some specific examples of the use of SIP 5.1. SIP and 3GPP for Cellular Networks 5.2. SIP for Advanced Telephony 5.3. SIP and UnifiedSAMPLE Communication CHAPTERS 5.4. Collaboration 6. Conclusions Glossary Bibliography Biographical Sketches Summary The end of the 20th century and the beginning of the 21st century has seen incredible ©Encyclopedia of Life Support Systems (EOLSS) TELECOMMUNICATION SYSTEMS AND TECHNOLOGIES - Vol.
    [Show full text]