DOCSLIB.ORG

Single-Headed Artist Series Concert Toms

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Single-Headed Artist Series Concert Toms CONCERT DRUMS Artist Series Concert Toms “I really love the fat, enveloping tone produced by the thin maple and walnut shells of the Mapex Artist series toms and Majestic Prophonic bass drum. These shells and the I.T.S. mounting system create a sound which can be felt. I also like very much that this hardware allows easy positioning within my multi-percussion set-ups.” Nebojsa Jovan Zivkovic Mapex Concert Percussion Artist, World Renowned Percussion Composer and Performer Single-Headed 38 CONCERT DRUMS The foundation of Mapex’s Artist series concert toms is the thin 5.1mm shell The patented Mapex Isolated Tom Mount System (I.T.S.) featuring four outer plies of Maple with two interior plies of Walnut. The combination of this shell with the I.T.S. suspension mounting system and small, single point mounted lugs yields a sound that is warm, open, focused, and musical. Both single and double- headed versions are available in eight sizes each, ranging from 6” to 16”. See page 61 for tom stand information. Double-Headed Two interior plies of Walnut deliver a dark, rich sound with a wide tonal range. ARTIST TOM SETS!SINGLE HEADED SHELL MOUNTING MODEL SHELL SIZES MATERIAL HOOPS LUGS SYSTEM FINISH HEADS MSRP ATS 0608 6“ x 8” 4 Lugs, Single Screw Low Mass 250.00 ATS 0808 8“ x 8” 4 Lugs, Single Screw Low Mass 260.00 ATS 1010 10“ x 10” 6 Lugs, Single Screw Low Mass 290.00 ATS 1210 12“ x 10” 6 Lugs, Single Screw Low Mass 310.00 5.1mm 2.3mm Dark Co!ee Remo® I.T.S. Maple/Walnut Chromed Steel Lacquer Renaissance™ ATS 1311 13“ x 11” 6 Lugs, Single Screw Low Mass 340.00 ATS 1412 14“ x 12” 8 Lugs, Single Screw Low Mass 380.00 ATS 1514 15“ x 14” 8 Lugs, Single Screw Low Mass 430.00 ATS 1614 16“ x 14” 8 Lugs, Single Screw Low Mass 460.00 ARTIST TOM SETS!DOUBLE HEADED SHELL MOUNTING MODEL SHELL SIZES MATERIAL HOOPS LUGS SYSTEM FINISH HEADS MSRP ATD 0608 6“ x 8” 4 Lugs, Single Screw Low Mass 330.00 ATD 0808 8“ x 8” 4 Lugs, Single Screw Low Mass 340.00 ATD 1010 10“ x 10” 6 Lugs, Single Screw Low Mass 380.00 ATD 1210 12“ x 10” 6 Lugs, Single Screw Low Mass 410.00 5.1mm 2.3mm Dark Co!ee Remo I.T.S. Maple/Walnut Chromed Steel Lacquer Renaissance ATD 1311 13“ x 11” 6 Lugs, Single Screw Low Mass 440.00 ATD 1412 14“ x 12” 8 Lugs, Single Screw Low Mass 480.00 ATD 1514 15“ x 14” 8 Lugs, Single Screw Low Mass 550.00 ATD 1614 16“ x 14” 8 Lugs, Single Screw Low Mass 560.00 39 CONCERT DRUMS By rising to the challenge of providing Concert Series Tom Sets pro-level features at a reasonable price, the Mapex Concert series toms set a new benchmark for what should be expected in the school band percussion section. Birch/Maple combination shells feature single screw, low mass lugs and utilize the I.T.S. mounting system to minimize shell contact and maximize tone and resonance. Available in both single head and double head con!gurations, the Concert series toms are sold in sets of two and include a double stand. See page 61 for stand information. Single & Double-Headed The patented Mapex non-penetrating Isolated Tom Mount System (I.T.S.) CONCERT TOM SETS!SINGLE HEADED SHELL MOUNTING MODEL SHELL SIZES MATERIAL HOOPS LUGS STAND SYSTEM FINISH HEADS MSRP CTS 68 S 6“ x 8”, 8“ x 8” 4 Lugs, Single Screw Low Mass 440.00 CTS 1012 S 10“ x 10”, 12“ x 10” 5 Lugs, Single Screw Low Mass 500.00 7.2mm 1.6mm Black Woodgrain Remo® TS550A I.T.S. Maple/Birch Chromed Steel 6, 8 Lugs, Covering UT™ Clear CTS 1314 S 13“ x 11”, 14“ x 12” 530.00 Single Screw Low Mass CTS 1516 S 15“ x 14”, 16“ x 14” 8 Lugs, Single Screw Low Mass 630.00 CONCERT TOM SETS!DOUBLE HEADED SHELL MOUNTING MODEL SHELL SIZES MATERIAL HOOPS LUGS STAND SYSTEM FINISH HEADS MSRP CTD 68 S 6“ x 8”, 8“ x 8” 4 Lugs, Single Screw Low Mass 540.00 CTD 1012 S 10“ x 10”, 12“ x 10” 5 Lugs, Single Screw Low Mass 660.00 7.2mm 1.6mm Black Woodgrain Remo TS550A I.T.S. Maple/Birch Chromed Steel 6, 8 Lugs, Covering UT Clear CTD 1314 S 13“ x 11”, 14“ x 12” 720.00 Single Screw Low Mass CTD 1516 S 15“ x 14”, 16“ x 14” 8 Lugs, Single Screw Low Mass 830.00 40 CONCERT DRUMS The Concert series bass drum from Majestic o"ers great sound with a durable design and Concert Series #exible stand options. Starting with a 7.2mm Bass Drums Birch shell for a full rich sound, the drums are then out!tted with solid aluminum hoops and contemporary tube lugs that provide stability with minimal shell contact. The claws feature nylon sleeves for silent NOW AVAILABLE WITH FIELD FRAME operation and drum-key style tension rods. See page 61 for stand options. CONCERT BASS DRUMS SHELL TENSION MODEL SHELL SIZE MATERIAL HOOPS LUGS CLAWS RODSFINISHHEADSMSRP CBD 2816 28“ x 16” 8 Tube-Style 830.00 CBD 3218 32“ x 18” 10 Tube-Style Square Head 1,050.00 Screw w/ Nylon Black Woodgrain Remo CBD 3618 36“ x 18” 7.2mm Birch Black Aluminum Steel Washer 1,200.00 Covering Fiberskyn3 CBD 3622 36“ x 22” 12 Tube-Style 1,250.00 CBD 4018 40“ x 18” 1,350.00 CONCERT DRUMS Majestic’s Prophonic Concert bass drums establish Prophonic new standards for resonance and projection. The binary shell of the Prophonic bass drum is an ultra- Bass Drums thin combination of maple and walnut plies with reinforcing rings and rounded bearing edges for a deep, rich tone that adds dramatic depth to every performance. Prophonic Concert Bass Drums are NOW AVAILABLE WITH FIELD FRAME equipped with Remo ® Fiberskyn3 ™ heads for warm See page 61 for stand options. concert-quality sound and durable chambered aluminum hoops that eliminate warping and cracking while facilitating consistent tuning. SUSTAINED SOUND BASS DRUMS WITH CONCERT FRAME SHELL MODEL SHELL SIZE MATERIAL HOOPS FINISH FRAME TILT ANGLE CASTERS HEADS MSRP PBS 2818 28“ x 18” 2,400.00 2 Interior Walnut, PBS 3218 32“ x 18” Internally 2,500.00 4 Outer Maple, Dark Co!ee 360 º Rotation, Remo Chambered Concert 4” Double-Locking w/ Walnut Lacquer Locking Fiberskyn3 PBS 3622 36“ x 22” Aluminum Alloy 2,990.00 Reinforcing Rings PBS 4022 40“ x 22” 3,550.00 SUSTAINED SOUND BASS DRUMS WITH FIELD FRAME 32“ x 18” 2,875.00 PBF 3218 2 Interior Walnut, Internally 4 Outer Maple, Dark Co!ee 360 º Rotation, Remo PBF 3622 36“ x 22” Chambered Field 8” Pneumatic 3,240.00 w/ Walnut Lacquer Locking Fiberskyn3 Aluminum Alloy Reinforcing Rings PBF 4022 40“ x 22” 3,775.00 4141 TIMPANI Grand Classic Series The Grand Classic series provides the ultimate in timpani performance for universities and professional orchestras. From kettle and head options to choosing a pedal system, each set is custom built to meet your performance needs. Maarten Smit Majestic Concert Timpanist, Principal Timpanist, Netherlands Radio Philharmonic GRAND CLASSIC STANDARD FEATURES FEATURE DESCRIPTION KETTLE Deep Drawn Seamless Copper FRAME Cast Aluminum TUNING Adjustable Gauge and Hand Fine Tuner CASTERS Single Lever Retractable Caster Axle DROP COVERS Full Length, Zippered, Padded GRAND CLASSIC CUSTOM FEATURES FEATURE OPTIONS KETTLE Cambered Copper FINISH Precision Hammered or Polished PEDAL Berlin Clutch, Dresden Clutch, Berlin Ratchet HEAD Remo Renaissance or Kalfo® Calfskin CONFIGURATIONS American or German 42 TIMPANI With an incredibly smooth and secure block pedal system, the Symphonic Grand series makes pro level features and performance accessible to a wide range of ensembles. This series combines all bene!ts of a piston clutch pedal system with Symphonic Grand Series a hand !ne tuner/master tuner and the innovative foot !ne tuner with adjustable resistance. The resulting instruments are perfect for advanced high school percussion sections, universities, and most professional applications. SYMPHONIC GRAND FINE MODEL SIZES KETTLE FINISH FRAME PEDAL TUNERCASTERSHEADSMSRP GR 05 A (SET OF 5) Precision Hammered 34,925.00 Cambered Copper, Remo 20”, 23”, 26”, 29”, 32” Cast Aluminum Block Style Hand & Foot Double-Locking Seamless Renaissance GRK 05 A (SET OF 5) Polished 32,845.00 GR 04 A (SET OF 4) Precision Hammered 28,000.00 Cambered Copper, Remo 23”, 26”, 29”, 32” Cast Aluminum Block Style Hand & Foot Double-Locking Seamless Renaissance GRK 04 A (SET OF 4) Polished 26,595.00 GR 02 A (SET OF 2) Precision Hammered 13,890.00 Cambered Copper, Remo 26”, 29” Cast Aluminum Block Style Hand & Foot Double-Locking Seamless Renaissance GRK 02 A (SET OF 2) Polished 13,120.00 43 TIMPANI Popular for use in middle school and high school ensembles, as well as college percussion studios, the Symphonic series features #exibility to choose between suspended precision Symphonic Series hammered cambered copper kettles, suspended smooth polished cambered copper kettles, or suspended parabolic FRP kettles. The balanced pedal employed by all Symphonic models is known for its accurate stability, and distinctively light, smooth action. The built-in third wheel assembly under the pedal provides easy, stable movement. Symphonic timpani also come complete with easy-to-read tuning gauges and full-length padded covers with zippers. SYMPHONIC SERIES WITH CAMBERED KETTLE TUNING MODEL SIZES KETTLE FINISH FRAME PEDAL GAUGE CASTERS HEADS MSRP MP 05 AH (SET OF 5) Precision Hammered 19,975.00 Cambered Copper, Balance Remo 20”, 23”, 26”, 29”, 32” Cast Aluminum Standard Double-Locking Seamless Style Renaissance MP 05 A (SET OF 5) Polished 18,765.00 MP 04 AH (SET OF 4) Precision Hammered 16,375.00 Cambered Copper, Balance Remo 23”, 26”, 29”, 32” Cast Aluminum Standard Double-Locking Seamless Style Renaissance MP 04 A (SET OF 4) Polished 15,270.00 MP 02 AH (SET OF 2) Precision Hammered 7,775.00 Cambered Copper, Balance Remo 26”, 29” Cast Aluminum Standard Double-Locking Seamless Style Renaissance MP 02 A (SET OF 2) Polished 7,530.00 SYMPHONIC SERIES WITH FIBERGLASS KETTLE MPF 05 AP (SET OF 5) 20”, 23”, 26”, 29”, 32” 12,160.00 Parabolic Fiberglass Balance Remo MPF 04 AP (SET OF 4) 23”, 26”, 29”, 32” w/ Steel Smooth Cast Aluminum Standard Double-Locking 10,000.00 Style Renaissance Bearing Edge MPF 02 AP (SET OF 2) 26”, 29” 4,905.00 44 TIMPANI The innovative Prophonic series combines Prophonic Series the superior sound of a fully suspended cambered copper kettle on an elegant portable frame featuring the smooth, stable Majestic balance-style pedal mechanism.
Load more

Recommended publications
  • Microphone Techniques for Drums (English)
    MICROPHONE TECHNIQUES DRUMS A Shure Educational Publication Microphone Techniques Table of Contents for DRUMS General Rules . 4 Microphone Positions . 6 Overhead-Cymbals . 7 Snare drum . 7 Bass drum (kick drum) . 7 Tom-toms . 7 Hi-hat . 8 Snare, hi-hat and hi-tom . 8 Cymbals, floor tom and hi-tom . 8 Timbales, congas, bongos . 9 Tambourine . 9 Steel drums . 9 Xylophone, marimba, vibraphone . 9 Glockenspiel . 9 Glossary . 10 Microphone Selection Guide . 11 Drums 3 Microphone Techniques for DRUMS GENERAL RULES Microphone technique is largely a matter of personal taste — whatever method sounds right for the particular instrument, musician, and song is right. There is no one ideal microphone to use on any particular instrument. There is also no one ideal way to place a microphone. Place the microphone to get the sound you want. However, the desired sound can often be achieved more quickly and consistently by understanding basic microphone characteristics, sound-radiation properties of musical instruments, and acoustic fundamentals. Here are some suggestions to follow when miking musical instruments for sound reinforcement. • Try to get the sound source (instrument, voice, or amplifier) to sound good acoustically (“live”) before miking it. • Use a microphone with a frequency response that is limited to the frequency range of the instrument, if possible, or filter out frequencies below the lowest fundamental frequency of the instrument. • To determine a good starting microphone position, try closing one ear with your finger. Listen to the sound source with the other ear and move around until you find a spot that sounds good. Put the microphone there.
    [Show full text]
  • Stylistic Evolution of Jazz Drummer Ed Blackwell: the Cultural Intersection of New Orleans and West Africa
    STYLISTIC EVOLUTION OF JAZZ DRUMMER ED BLACKWELL: THE CULTURAL INTERSECTION OF NEW ORLEANS AND WEST AFRICA David J. Schmalenberger Research Project submitted to the College of Creative Arts at West Virginia University in partial fulfillment of the requirements for the degree of Doctor of Musical Arts in Percussion/World Music Philip Faini, Chair Russell Dean, Ph.D. David Taddie, Ph.D. Christopher Wilkinson, Ph.D. Paschal Younge, Ed.D. Division of Music Morgantown, West Virginia 2000 Keywords: Jazz, Drumset, Blackwell, New Orleans Copyright 2000 David J. Schmalenberger ABSTRACT Stylistic Evolution of Jazz Drummer Ed Blackwell: The Cultural Intersection of New Orleans and West Africa David J. Schmalenberger The two primary functions of a jazz drummer are to maintain a consistent pulse and to support the soloists within the musical group. Throughout the twentieth century, jazz drummers have found creative ways to fulfill or challenge these roles. In the case of Bebop, for example, pioneers Kenny Clarke and Max Roach forged a new drumming style in the 1940’s that was markedly more independent technically, as well as more lyrical in both time-keeping and soloing. The stylistic innovations of Clarke and Roach also helped foster a new attitude: the acceptance of drummers as thoughtful, sensitive musical artists. These developments paved the way for the next generation of jazz drummers, one that would further challenge conventional musical roles in the post-Hard Bop era. One of Max Roach’s most faithful disciples was the New Orleans-born drummer Edward Joseph “Boogie” Blackwell (1929-1992). Ed Blackwell’s playing style at the beginning of his career in the late 1940’s was predominantly influenced by Bebop and the drumming vocabulary of Max Roach.
    [Show full text]
  • The Craft of Fine Drum Making
    2 playDIXON.com 3 Dixon Conviction Dixon Drums is a full-line acoustic drum and hardware brand with over 35 years of manufacturing experience. Committed to quality and innovation, we embrace both sound and function to advance the art of drumming through the craft of fine drum making. A drummer-centric approach is at the core of everything we do, resonating throughout each one of our product lines. We have established a reputation for durability and reliability, while remaining nimble enough to respond to industry trends and player needs quickly and creatively. In this catalog, you will see a dynamic blend of time-tested, industry-standard configurations mixed with innovations in shell materials, cutting-edge hardware designs, and world-class signature artist models. Our ability to serve all styles of music (ranging from Jazz to Metal), deliver at all levels of playing (beginner to pro), and offer full customization of each aspect of the instrument (see our flagship Artisan Series), has made Dixon a rising star in today’s drum market. Join the Dixon family, and be a part of drum history in the making. 4 playDIXON.com 5 Committed to Quality Driven by Sound 06 / ARTISAN Series 18 / BLAZE Series 20 / FUSE Series 22 / SPARK Series 24 / JET SET Series 26 / SNARE Drums 36 / HARDWARE 53 / INVENTOR Series 6 Series playDIXON.com 7 Features Dixon understands that every drummer reaches a point when it all comes together and refined skills culminate in optimum results. We refer to this achievement as ARTISAN. Our flagship series delivers the very best our craftsmen have to offer, along with choices to personalize your instrument.
    [Show full text]
  • Bass Drum Cases Snare Drum Cases Power Tom
    DANNY SERAPHINE THOMAS LANG VIRGIL DONATI DERRICK WRIGHT THOMAS PRIDGEN C.T.A MIKE JOHNSTON Stork/Indep. Planet X/Steve Vai Adele The Memorials Educator Licensed by: Bass Drum Cases Prices subject to change without notice. Snare Drum Cases Pro Grip Handles Retail Retail AR1418 • 14“ x 18” w/legs bass drum case..... 124.50 AR3003 • 3“ x 13” piccolo.................................$ 58.50 AR1618 • 16“ x 18” bass drum case................ 126.50 AR3004 • 4“ x 14” piccolo ................................. 62.50 AR1818 • 18“ x 18” bass drum case................ 159.50 AR3005 • 6½“ x 15” free floater snare case....... 65.50 AR1420 • 14“ x 20” bass drum case................. 144.50 AR3006 • 6½” x 14“ standard snare case......... 58.50 AR1620 • 16“ x 20” bass drum case................. 146.50 AR3007 • 5“ x 13” piccolo snare case............... 60.50 AR1820 • 18“ x 20” bass drum case................. 139.50 AR3008 • 7“ x 12” snare case............................ 60.50 Patented "TruForm" design AR3009 • 8“ x 14” snare case............................ 69.50 AR2020 • 20“ x 20” bass drum case................. 149.50 corresponds to the "true AR2420 • 24“ x 20” deep bass drum case........ 168.50 shape" of the drum plus its AR3010 • 5“ x 10” piccolo snare case............... 56.50 mounting hardware. This AR3011 • 5½“ x 14” snare case......................... 58.50 AR1422 • 14“ x 22” bass drum case................. 145.50 universal teardrop design allows a much snugger fit. AR3012 • 5“ x 12” piccolo snare case............... 60.50 AR1622 • 16“ x 22” bass drum case................. 145.50 AR3013 • 7“ x 13” snare case............................ 65.50 AR1822 • 18“ x 22” bass drum case................
    [Show full text]
  • Multi-Percussion in the Undergraduate Percussion Curriculum Benjamin A
    University of Miami Scholarly Repository Open Access Dissertations Electronic Theses and Dissertations 2014-12 Multi-percussion in the Undergraduate Percussion Curriculum Benjamin A. Charles University of Miami, [email protected] Follow this and additional works at: http://scholarlyrepository.miami.edu/oa_dissertations Recommended Citation Charles, Benjamin A., "Multi-percussion in the Undergraduate Percussion Curriculum" (2014). Open Access Dissertations. Paper 1324. This Open access is brought to you for free and open access by the Electronic Theses and Dissertations at Scholarly Repository. It has been accepted for inclusion in Open Access Dissertations by an authorized administrator of Scholarly Repository. For more information, please contact [email protected]. ! ! UNIVERSITY OF MIAMI ! ! MULTI-PERCUSSION IN THE UNDERGRADUATE PERCUSSION CURRICULUM ! By Benjamin Andrew Charles ! A DOCTORAL ESSAY ! ! Submitted to the Faculty of the University of Miami in partial fulfillment of the requirements for the degree of Doctor of Musical Arts ! ! ! ! ! ! ! ! ! Coral Gables,! Florida ! December 2014 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ©2014 Benjamin Andrew Charles ! All Rights Reserved UNIVERSITY! OF MIAMI ! ! A doctoral essay proposal submitted in partial fulfillment of the requirements for the degree of Doctor of Musical! Arts ! ! MULTI-PERCUSSION IN THE UNDERGRADUATE PERCUSSION CURRICULUM! ! Benjamin Andrew Charles ! ! !Approved: ! _________________________ __________________________
    [Show full text]
  • Choosing a Drum Set for Worship
    Choosing a Drum Set for Worship We hope this guide will help you find the right drum set and drum hardware that fits your playing style and needs. Whether it is an affordable starter set or a sophisticated, arena-worthy acoustic or electronic kit, this guide will help you identify the right combination of gear to match your budget and percussion skills. You will learn about the elements that go into making drums and cymbals, and what to consider when shopping for drums. Before choosing a drum set, you need to be familiar with the components that go into it, these include: The Snare Drum, the Bass Drum, one or more Mounted Toms and a Floor Tom. The two other essential components that complete a full drum set, Cymbals and Hardware. We have also included a section on how to reduce acoustic drum volume, a microphone alternative, and a section on electronic drums. If you are unfamiliar with any of the terms used here, please see the Glossary of Terms at the end of this document. Enjoy! Parts of the Drum Set ANATOMY OF A DRUM TOP (BATTER) HEAD: The most basic component of a drum, the head is a round membrane made of a synthetic material usually mylar, that is stretched across the shell, with varying degrees of tension. HOOP: The drum hoop is usually made of either cast or stamped metal, although some drummers prefer wood hoops. Hoops are constructed with a flange shaped to hold the head on the shell for tensioning. TENSION ROD: These mount through holes in the hoop and thread into the lug to maintain the desired tension.
    [Show full text]
  • TC 1-19.30 Percussion Techniques
    TC 1-19.30 Percussion Techniques JULY 2018 DISTRIBUTION RESTRICTION: Approved for public release: distribution is unlimited. Headquarters, Department of the Army This publication is available at the Army Publishing Directorate site (https://armypubs.army.mil), and the Central Army Registry site (https://atiam.train.army.mil/catalog/dashboard) *TC 1-19.30 (TC 12-43) Training Circular Headquarters No. 1-19.30 Department of the Army Washington, DC, 25 July 2018 Percussion Techniques Contents Page PREFACE................................................................................................................... vii INTRODUCTION ......................................................................................................... xi Chapter 1 BASIC PRINCIPLES OF PERCUSSION PLAYING ................................................. 1-1 History ........................................................................................................................ 1-1 Definitions .................................................................................................................. 1-1 Total Percussionist .................................................................................................... 1-1 General Rules for Percussion Performance .............................................................. 1-2 Chapter 2 SNARE DRUM .......................................................................................................... 2-1 Snare Drum: Physical Composition and Construction .............................................
    [Show full text]
  • Drum Set Setup Step
    DRUM SET SETUP 1 STEP 2 A practical guideline for setting up 3 a BY drum set STEP 1 UNPACKING AND ALLOCATING CONTENTS You see two cardboard boxes in front of you. For reasons of transportation your drum set has been delivered dismantled into single parts. Don‘t worry, by means of the following instructions we will help you to assemble your drum set correctly. Depending on the model, the quantities indicated may vary. First, we refer to the content CONTENTS of the two boxes and the allocation of the single drums. 1 drum shell, 12 wing screws with washers, 12 claw hooks, BASS DRUM 1 bottom head, 1 batter head, 2 rims, 2 bass-drum legs (spurs) SNARE DRUM 1 snare drum completely assembled 1 drum shell each 2 x 2 heads, TOM-TOM 1 + 2 2 x 2 rims 2 x 10 wing screws with washers 1 dum shell, 10 wing screws with washers, 2 heads, FLOOR TOM 2 rims, 3 legs 1 tuning key, ACCESSORIES 1 pair of drumsticks Ride cymbal, CYMBALS Crash cymbal, (if included in scope of delivery) 2 hi-hat cymbals HARDWARE PACKAGE 1 bass-drum pedal 1 hi-hat stand 1 snare-drum stand 1 cymbal boom stand, 1 straight cymbal stand 2 tom-tom mounting arms 2 ASSEMBLING THE DRUMS BASS DRUM We begin with the bass drum. Take the bass drum shell and place it in such a way that the attachment screws of the bass drum legs as well as the tom-tom mounting assembly point downwards. 1 Now take the bottom head (black with logo) and lay it on the drum shell.
    [Show full text]
  • ROGERS Literature 09.Pdf
    RD2124 with add-on floor tom RD2124 The Trailblazer drum set features birch/poplar shells in three spectacular Delmar wraps. All kits come complete with a double bass drum pedal, 2-legged hi-hat stand and a nickel-plated steel snare drum. These are just some of the features that raise the bar at this unbeatable price. The Trailblazer offers three unique configurations to choose from, with 8” toms and 14” floor toms to create your custom configuration. Pro features and incredible value is what you will find with the all new Trailblazer series. RD2120 with add-on tom Kansas City Swirl Pittsburgh Swirl Indy Swirl RD2122 RD2122 with add-on toms bass drum floor tom mounted tom steel snare RD2120 20”x 16” 14”x 13” 10”x 7.5”, 12”x 8” 14”x 5.5” RD2122 22”x 16” 16”x 15” 10”x 7.5”, 12”x 8” 14”x 5.5” RD2124 24”x 18” 16”x 15” 12”x 8” 14”x 5.5” RD2122P5 22”x 16” 16”x 15” 10”x 7.5”, 12”x 8” 14”x 5.5” add-on toms RTT-0807TB 8”x 7” tom with multi-clamp and tom arm RD2120 RFT-1413TB 14”x 13” floor tom straight boom boom 2-leg hi-hat snare double bass drum tom cymbal stand cymbal stand arm stand stand drum pedal throne arm cymbals RD2120 •• ••• 2 RD2122 •• ••• 2 RD2124 •••••• 1 RD2122P5 •• ••• 2Paiste PST5 14/16/20 2-Legged Hi-Hat Stand Double Bass Drum Pedal Nickel-Plated Steel Snare Improved Floor Tom Ball Joint Tom Mount Ball Joint Snare Stand Hardware (with RIMS-type mount) The Prospector series features 100% poplar shells in four stunning finishes.
    [Show full text]
  • Your Drum Kit
    JUNIOR 5 PIECE DRUM KIT SETUP GUIDE JUNIOR 5 PIECE DRUM KIT CONTENTS CHECKLIST First, check the package and make sure you have everything you need. DRUMS AND CYMBALS: HARDWARE: 1x Snare Drum (10”) 1x Hi-Hat Stand 1x Tom Tom Drum (8”) 1x Crash Cymbal Stand 1x Tom Tom Drum (10”) 1x Snare Drum Stand 1x Floor Tom Drum (12”) 2x Bass Drum Legs 1x Bass Drum (16”) 3x Floor Tom Legs 1x Pair of Hi-Hat Cymbals 1x Pair of Drum Sticks (Pair, 10” – Top and Bottom) 1x Drum Stool 1x Crash Cymbal (12”) 1x Drum Stool Stand HOOPS AND TENSION RODS: 2x Tom Tom Arms 8x Floor Tom Tension Rods and Washers (2x rods already attached to tom) 1x Bass Drum Pedal and Beater 12x Bass Drum Tension Rods, 1x Drum Key Claws and Washers 2x Bass Drum Hoops 2x Tom Tom Hoops (12”, attached to drum) 2x Tom Tom Hoops (13”, attached to drum) 2x Floor Tom Hoops (12”, attached to drum) DRUM HEADS: 2x Bass Drum Heads (16”) 2x Snare Drum Heads (10”, attached to drum) 2x Floor Tom Heads (12”) 2x Tom Tom Heads (8”, attached to drum) 2x Tom Tom Heads (10”, attached to drum) 2x Floor Tom Heads (12”, attached to drum) 1 YOUR DRUM KIT Your Junior 5 Piece Drum Kit will arrive in one box and should take around 30 minutes to fully assemble. Crash Cymbal 8” Tom Tom Crash Cymbal Arm Hi-Hat 10” Tom Tom Hi-Hat Stand Bass Drum Snare Drum 12” Floor Tom Snare Drum Stand Drum Stool Bass Drum Pedal Bass Drum Tension Rods, Claws and Washers Bass Drum Leg 2 ASSEMBLY INSTRUCTIONS BASS DRUM ASSEMBLY ITEMS REQUIRED: 12x Bass Drum Tension Rods, Claws and Washers 1x Bass Drum (16”) 1x Bass Drum Pedal and Beater 2x Bass Drum Heads (16”) 2x Bass Drum Legs 2x Bass Drum Hoops 1x Drum Key 1.
    [Show full text]
  • Curriculum for Middle School Percussion
    Columbus State University CSU ePress Theses and Dissertations Student Publications 2005 Curriculum for Middle School Percussion Amanda Hertel Columbus State University Follow this and additional works at: https://csuepress.columbusstate.edu/theses_dissertations Part of the Music Education Commons Recommended Citation Hertel, Amanda, "Curriculum for Middle School Percussion" (2005). Theses and Dissertations. 112. https://csuepress.columbusstate.edu/theses_dissertations/112 This Thesis is brought to you for free and open access by the Student Publications at CSU ePress. It has been accepted for inclusion in Theses and Dissertations by an authorized administrator of CSU ePress. Digitized by the Internet Archive in 2012 with funding from LYRASIS Members and Sloan Foundation http://archive.org/details/curriculumformidOOhert Curriculum for Middle School Percussion By Amanda Hertel A Thesis Submitted in Partial Fulfillment of Requirements of the CSU Honors Program for Honors in the degree of Bachelors of Music in Music Education, College of Arts & Letters, Columbus State University Thesis Advisor Date 6/ Committee Member Date ^Jfj f/Oi Committee Member tz&^M Of' DateW^S CSU Honors Committee Member Q^Wfez--e j /jsi-i/^' Date VV^ !>" Coordinator, Honors Program /^^t-^V^g V jN_ c t-^y/^ Date 5/"JdS Curriculum for Middle school percussion Amanda Hertel 1 Based on three thirty-six week school years (6-8 grade) -With thirty-five lesson plans for percussion sectionals outside ofdaily hand curriculum -A set ofweekly objectives that are applicable to in class ensemble instruction. -Twenty periodical examinations and testing material -Assignment and Examination grading logs -Guidelines for projects and writing assignments -Questions for Reading checks -Table of Contents- th 1.
    [Show full text]
  • Classic Maple Quick Pick Pogram
    Classic Maple Quick Pick Pogram Made in the U.S.A. • Monroe, NC Join the Family Looking back at over a century of Ludwig Percussion, the word “Family” continues to fnd its way into how we defne who we are as a company. It’s certainly no secret that we bolster a rich history, originated by William F. and Theobald Ludwig in 1909. These pioneers laid a solid foundation for drummers and percussionists, creating instruments for the needs of generations of players. That tradition continued with William F. Ludwig II (or “The Chief” as he has come to be known). The Chief’s dedication to the Ludwig legacy went way beyond his name. It was his dedication to everyone from the artisans at the Ludwig factory, to the drummers who played his creations that established the feeling of a true Family. From Damen Avenue in Chicago to our current facility in Monroe, NC. The Ludwig Family continues on in its founder’s tradition as a notable American manufacturer. As dedicated as we are to the legacy we preserve, it is the dedication of today’s Ludwig Drummer that inspires us to surpass the standards established by The Chief. Our focus is to educate and inspire a new generation of Ludwig Drummers, and offer an inside look at the care and craftsmanship our artisans put into each product that bears our name. Combining a process for crafting percussion instruments that has been refned over a century with today’s most advanced technologies, we proudly invite you to join our family and be a vital part of the legacy that is “The Most Famous Name in Drums”.
    [Show full text]