Bbedit 13.5 User Manual
Total Page：16
File Type：pdf, Size：1020Kb
Load more
Recommended publications
-
Intermediate Perl – Session 7
1.1.2.8 – Intermediate Perl 1.1.2.8.7 Intermediate Perl – Session 7 · POD – plain old documentation · processing command line parameters · processing configuration files 9/23/2008 1.1.2.8.7 - Intermediate Perl - POD, parameters and configuration 1 1.1.2.8 – Intermediate Perl POD – plain old documentation ·embed documentation in your scripts with POD ·POD is very simple because it stands for Plain Old Documentation · it is meant to be easy to use – and it is! · POD is a simple markup language · write documentation once and export it to multiple formats · man, html, text · POD formatting codes are embedded in your script ·Pod::Usage module displays documentation for the script when the script is executed · how handy is that? 9/23/2008 1.1.2.8.7 - Intermediate Perl - POD, parameters and configuration 2 1.1.2.8 – Intermediate Perl POD structure – sections start and end pod with =pod =pod and =cut =head1 NAME script – take over the world in one line of Perl separate paragraphs by =head1 SYNOPSIS new lines script –mode EVIL|GOOD [-debug] use =head1 and =head2 =head1 DESCRIPTION for headings You can take over the world as an EVIL doer or a GOOD doer. Pick one. =head2 EVIL indent code Evil is more fun. =head2 GOOD =over and =back to =over indent text =item * advantages =item * for bullet lists none =item * disadvantages no fun =back =cut 9/23/2008 1.1.2.8.7 - Intermediate Perl - POD, parameters and configuration 3 1.1.2.8 – Intermediate Perl POD structure – ordinary paragraphs ordinary paragraphs # contents of podexample =pod representing text that =head1 EXAMPLE you'd like wrapped and justified have no This is an ordinary paragraph that will be indented, wrapped and maybe even justified. -
DFDL WG Stephen M Hanson, IBM [email protected] September 2014
GFD-P-R.207 (OBSOLETED by GFD-P-R.240) Michael J Beckerle, Tresys Technology OGF DFDL WG Stephen M Hanson, IBM [email protected] September 2014 Data Format Description Language (DFDL) v1.0 Specification Status of This Document Grid Final Draft (GFD) Obsoletes This document obsoletes GFD-P-R.174 dated January 2011 [OBSOLETE_DFDL]. Copyright Notice Copyright © Global Grid Forum (2004-2006). Some Rights Reserved. Distribution is unlimited. Copyright © Open Grid Forum (2006-2014). Some Rights Reserved. Distribution is unlimited Abstract This document is OBSOLETE. It is superceded by GFD-P-R.240. This document provides a definition of a standard Data Format Description Language (DFDL). This language allows description of text, dense binary, and legacy data formats in a vendor- neutral declarative manner. DFDL is an extension to the XML Schema Description Language (XSDL). GFD-P-R.207 (OBSOLETED by GFD-P-R.240) September 2014 Contents Data Format Description Language (DFDL) v1.0 Specification ...................................................... 1 1. Introduction ............................................................................................................................... 9 1.1 Why is DFDL Needed? ................................................................................................... 10 1.2 What is DFDL? ................................................................................................................ 10 Simple Example ...................................................................................................... -
"This Book Was a Joy to Read. It Covered All Sorts of Techniques for Debugging, Including 'Defensive' Paradigms That Will Eliminate Bugs in the First Place
Perl Debugged By Peter Scott, Ed Wright Publisher : Addison Wesley Pub Date : March 01, 2001 ISBN : 0-201-70054-9 Table of • Pages : 288 Contents "This book was a joy to read. It covered all sorts of techniques for debugging, including 'defensive' paradigms that will eliminate bugs in the first place. As coach of the USA Programming Team, I find the most difficult thing to teach is debugging. This is the first text I've even heard of that attacks the problem. It does a fine job. Please encourage these guys to write more." -Rob Kolstad Perl Debugged provides the expertise and solutions developers require for coding better, faster, and more reliably in Perl. Focusing on debugging, the most vexing aspect of programming in Perl, this example-rich reference and how-to guide minimizes development, troubleshooting, and maintenance time resulting in the creation of elegant and error-free Perl code. Designed for the novice to intermediate software developer, Perl Debugged will save the programmer time and frustration in debugging Perl programs. Based on the authors' extensive experience with the language, this book guides developers through the entire programming process, tackling the benefits, plights, and pitfalls of Perl programming. Beginning with a guided tour of the Perl documentation, the book progresses to debugging, testing, and performance issues, and also devotes a chapter to CGI programming in Perl. Throughout the book, the authors espouse defensible paradigms for improving the accuracy and performance of Perl code. In addition, Perl Debugged includes Scott and Wright's "Perls of Wisdom" which summarize key ideas from each of the chapters, and an appendix containing a comprehensive listing of Perl debugger commands. -
Name Description
Perl version 5.10.0 documentation - perlnewmod NAME perlnewmod - preparing a new module for distribution DESCRIPTION This document gives you some suggestions about how to go about writingPerl modules, preparing them for distribution, and making them availablevia CPAN. One of the things that makes Perl really powerful is the fact that Perlhackers tend to want to share the solutions to problems they've faced,so you and I don't have to battle with the same problem again. The main way they do this is by abstracting the solution into a Perlmodule. If you don't know what one of these is, the rest of thisdocument isn't going to be much use to you. You're also missing out onan awful lot of useful code; consider having a look at perlmod, perlmodlib and perlmodinstall before coming back here. When you've found that there isn't a module available for what you'retrying to do, and you've had to write the code yourself, considerpackaging up the solution into a module and uploading it to CPAN so thatothers can benefit. Warning We're going to primarily concentrate on Perl-only modules here, ratherthan XS modules. XS modules serve a rather different purpose, andyou should consider different things before distributing them - thepopularity of the library you are gluing, the portability to otheroperating systems, and so on. However, the notes on preparing the Perlside of the module and packaging and distributing it will apply equallywell to an XS module as a pure-Perl one. What should I make into a module? You should make a module out of any code that you think is going to beuseful to others. -
The Bioperl Toolkit: Perl Modules for the Life Sciences
Downloaded from genome.cshlp.org on January 25, 2012 - Published by Cold Spring Harbor Laboratory Press The Bioperl Toolkit: Perl Modules for the Life Sciences Jason E. Stajich, David Block, Kris Boulez, et al. Genome Res. 2002 12: 1611-1618 Access the most recent version at doi:10.1101/gr.361602 Supplemental http://genome.cshlp.org/content/suppl/2002/10/20/12.10.1611.DC1.html Material References This article cites 14 articles, 9 of which can be accessed free at: http://genome.cshlp.org/content/12/10/1611.full.html#ref-list-1 Article cited in: http://genome.cshlp.org/content/12/10/1611.full.html#related-urls Email alerting Receive free email alerts when new articles cite this article - sign up in the box at the service top right corner of the article or click here To subscribe to Genome Research go to: http://genome.cshlp.org/subscriptions Cold Spring Harbor Laboratory Press Downloaded from genome.cshlp.org on January 25, 2012 - Published by Cold Spring Harbor Laboratory Press Resource The Bioperl Toolkit: Perl Modules for the Life Sciences Jason E. Stajich,1,18,19 David Block,2,18 Kris Boulez,3 Steven E. Brenner,4 Stephen A. Chervitz,5 Chris Dagdigian,6 Georg Fuellen,7 James G.R. Gilbert,8 Ian Korf,9 Hilmar Lapp,10 Heikki Lehva¨slaiho,11 Chad Matsalla,12 Chris J. Mungall,13 Brian I. Osborne,14 Matthew R. Pocock,8 Peter Schattner,15 Martin Senger,11 Lincoln D. Stein,16 Elia Stupka,17 Mark D. Wilkinson,2 and Ewan Birney11 1University Program in Genetics, Duke University, Durham, North Carolina 27710, USA; 2National Research Council of -
Notetab User Manual
NoteTab User Manual Copyright © 1995-2016, FOOKES Holding Ltd, Switzerland NoteTab® Tame Your Text with NoteTab by FOOKES Holding Ltd A leading-edge text and HTML editor. Handle a stack of huge files with ease, format text, use a spell-checker, and perform system-wide searches and multi-line global replacements. Build document templates, convert text to HTML on the fly, and take charge of your code with a bunch of handy HTML tools. Use a power-packed scripting language to create anything from a text macro to a mini-application. Winner of top industry awards since 1998. “NoteTab” and “Fookes” are registered trademarks of Fookes Holding Ltd. All other trademarks and service marks, both marked and not marked, are the property of their respective ow ners. NoteTab® Copyright © 1995-2016, FOOKES Holding Ltd, Switzerland All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems - without the written permission of the publisher. “NoteTab” and “Fookes” are registered trademarks of Fookes Holding Ltd. All other trademarks and service marks, both marked and not marked, are the property of their respective owners. While every precaution has been taken in the preparation of this document, the publisher and the author assume no responsibility for errors or omissions, or for damages resulting from the use of information contained in this document or from the use of programs and source code that may accompany it. In no event shall the publisher and the author be liable for any loss of profit or any other commercial damage caused or alleged to have been caused directly or indirectly by this document. -
Sample Chapter 3
108_GILLAM.ch03.fm Page 61 Monday, August 19, 2002 1:58 PM 3 Architecture: Not Just a Pile of Code Charts f you’re used to working with ASCII or other similar encodings designed I for European languages, you’ll find Unicode noticeably different from those other standards. You’ll also find that when you’re dealing with Unicode text, various assumptions you may have made in the past about how you deal with text don’t hold. If you’ve worked with encodings for other languages, at least some characteristics of Unicode will be familiar to you, but even then, some pieces of Unicode will be unfamiliar. Unicode is more than just a big pile of code charts. To be sure, it includes a big pile of code charts, but Unicode goes much further. It doesn’t just take a bunch of character forms and assign numbers to them; it adds a wealth of infor- mation on what those characters mean and how they are used. Unlike virtually all other character encoding standards, Unicode isn’t de- signed for the encoding of a single language or a family of closely related lan- guages. Rather, Unicode is designed for the encoding of all written languages. The current version doesn’t give you a way to encode all written languages (and in fact, this concept is such a slippery thing to define that it probably never will), but it does provide a way to encode an extremely wide variety of lan- guages. The languages vary tremendously in how they are written, so Unicode must be flexible enough to accommodate all of them. -
Pdflib API Reference 9.0.1
ABC PDFlib, PDFlib+PDI, PPS A library for generating PDF on the fly PDFlib 9.0.1 API Reference For use with C, C++, Cobol, COM, Java, .NET, Objective-C, Perl, PHP, Python, REALbasic/Xojo, RPG, Ruby Copyright © 1997–2013 PDFlib GmbH and Thomas Merz. All rights reserved. PDFlib users are granted permission to reproduce printed or digital copies of this manual for internal use. PDFlib GmbH Franziska-Bilek-Weg 9, 80339 München, Germany www.pdflib.com phone +49 • 89 • 452 33 84-0 fax +49 • 89 • 452 33 84-99 If you have questions check the PDFlib mailing list and archive at tech.groups.yahoo.com/group/pdflib Licensing contact: [email protected] Support for commercial PDFlib licensees: [email protected] (please include your license number) This publication and the information herein is furnished as is, is subject to change without notice, and should not be construed as a commitment by PDFlib GmbH. PDFlib GmbH assumes no responsibility or lia- bility for any errors or inaccuracies, makes no warranty of any kind (express, implied or statutory) with re- spect to this publication, and expressly disclaims any and all warranties of merchantability, fitness for par- ticular purposes and noninfringement of third party rights. PDFlib and the PDFlib logo are registered trademarks of PDFlib GmbH. PDFlib licensees are granted the right to use the PDFlib name and logo in their product documentation. However, this is not required. Adobe, Acrobat, PostScript, and XMP are trademarks of Adobe Systems Inc. AIX, IBM, OS/390, WebSphere, iSeries, and zSeries are trademarks of International Business Machines Corporation. -
Name Synopsis Description Main Methods
Perl version 5.10.0 documentation - Pod::Simple NAME Pod::Simple - framework for parsing Pod SYNOPSIS TODO DESCRIPTION Pod::Simple is a Perl library for parsing text in the Pod ("plain olddocumentation") markup language that is typically used for writingdocumentation for Perl and for Perl modules. The Pod format is explainedin the perlpod man page; the most common formatter is called"perldoc". Pod formatters can use Pod::Simple to parse Pod documents into producerenderings of them in plain ASCII, in HTML, or in any number of otherformats. Typically, such formatters will be subclasses of Pod::Simple,and so they will inherit its methods, like parse_file. If you're reading this document just because you have a Pod-processingsubclass that you want to use, this document (plus the documentation forthe subclass) is probably all you'll need to read. If you're reading this document because you want to write a formattersubclass, continue reading this document, and then read Pod::Simple::Subclassing, and then possibly even read perlpodspec(some of which is for parser-writers, but much of which is notes toformatter-writers). MAIN METHODS $parser = SomeClass->new(); This returns a new parser object, where SomeClass is a subclassof Pod::Simple. $parser->output_fh( *OUT ); This sets the filehandle that $parser's output will be written to.You can pass *STDOUT, otherwise you should probably do somethinglike this: my $outfile = "output.txt"; open TXTOUT, ">$outfile" or die "Can't write to $outfile: $!"; $parser->output_fh(*TXTOUT); ...before you call one of the $parser->parse_whatever methods. $parser->output_string( \$somestring ); This sets the string that $parser's output will be sent to,instead of any filehandle. -
Locale Database
International Language Environments Guide Part No: 817–2521–11 November 2010 Copyright © 2005, 2010, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related software documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable: U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are “commercial computer software” or “commercial technical data” pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms setforth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle America, Inc., 500 Oracle Parkway, Redwood City, CA 94065. -
Name Synopsis
Perl version 5.10.0 documentation - perl NAME perl - Practical Extraction and Report Language SYNOPSIS perl [ -sTtuUWX ] [ -hv ] [ -V[:configvar] ] [ -cw ] [ -d[t][:debugger] ] [ -D[number/list] ] [ -pna ] [ -F pattern ] [ -l[octal] ] [ -0[octal/hexadecimal] ] [ -Idir ] [ -m[-]module ] [ -M[-]'module...' ] [ -f ] [ -C [ number/list] ] [ -P ] [ -S ] [ -x[dir] ] [ -i[extension] ] [ -e 'command' ] [ -- ] [ programfile ] [ argument ]... If you're new to Perl, you should start with perlintro, which is a general intro for beginners and provides some background to help younavigate the rest of Perl's extensive documentation. For ease of access, the Perl manual has been split up into several sections. Overview perlPerl overview (this section) perlintroPerl introduction for beginners perltocPerl documentation table of contents Tutorials perlreftutPerl references short introduction perldscPerl data structures intro perllolPerl data structures: arrays of arrays perlrequick Perl regular expressions quick start perlretutPerl regular expressions tutorial perlbootPerl OO tutorial for beginners perltootPerl OO tutorial, part 1 perltoocPerl OO tutorial, part 2 perlbotPerl OO tricks and examples perlstylePerl style guide perlcheatPerl cheat sheet perltrapPerl traps for the unwary perldebtutPerl debugging tutorial perlfaqPerl frequently asked questions perlfaq1General Questions About Perl perlfaq2Obtaining and Learning about Perl perlfaq3Programming Tools perlfaq4Data Manipulation perlfaq5Files and Formats perlfaq6Regexes perlfaq7Perl Language Issues perlfaq8System -
C++ Reading a Line of Text
C++ Reading a Line of Text Because there are times when you do not want to skip whitespace before inputting a character, there is a function to input the next character in the stream regardless of what it is. The function is named get and is applied as shown. cin.get(character); The next character in the input stream is returned in char variable character. If the previous input was a numeric value, character contains whatever character ended the inputting of the value. There are also times when you want to skip the rest of the values on a line and go to the beginning of the next line. A function named ignore defined in file <iostream> allows you to do this. It has two parameters. The first is an int expression and the second is a character. This function skips the number of characters specified in the first parameter or all the characters up to and including the character specified in the second parameter, whichever comes first. For example, cin.ignore(80, '\n'); skips 80 characters or skips to the beginning of the next line depending on whether a newline character is encountered before 80 characters are skipped (read and discarded). As another example, consider: cin.ignore(4,’g’); cin.get(c); cout << c << endl; If the input to this program is “agdfg” then the input is ignored up to and including the ‘g’ so the next character read is ‘d’. The letter “d” is then output. If the input to this program is “abcdef” then the input is ignored for the first four characters, so the next character read is ‘e’.