DOCSLIB.ORG

Vicroads Supplement to AGRD Part 3: Geometric Design

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Vicroads Supplement to AGRD Part 3: Geometric Design VicRoads Supplement to Austroads Guide to Road Design Part 3: Geometric Design (2016) January 2017 Page 1 of 3 Commercial in Confidence Cover Sheet - 2017.docx Amendment Record Rev. No. Section/s Description of Revision Authorised By Date Released Update Rev. 1.0 First Edition Development of Supplement ED – Network & Asset July 2010 Planning Rev. 1.1 Various Minor changes to text, references Principal Advisor – Sept 2010 and layouts. Road Design, Traffic & Figure 5.1 & figures in table Standards updated Rev. 2.0 Section 2.2.7 Livestock Crossings Principal Advisor – July 2011 Section 5.3.1 Car Stopping Sight Distance Road Design, Traffic & Standards Section 7.1 Compound Curves Section 7.6.1 Minimum Radius Curves Section 8.4.2 Grading Point Section 8.5.3 Maximum Grades Section 8.6.3 Crest Vertical Curves Section 8.6.5 Sag Curves Rev 3.0 Section 3.3 Operating Speeds on Urban Principal Advisor – Sept 2012 Section 3.4 Roads Road Design, Traffic & Standards Section 4.7 Operating Speeds on Rural Roads Section 4.4 Medians Section 4.6 Verge Section 5.2 Roadside Drainage Section 7.6 Sight Distance General Side Friction & Minimum Curve General edits & corrections Rev. 3.1 Section 4.6 Roadside Drainage Principal Advisor – Dec 2012 Section 10.2 Bridge Cross Section Road Design, Traffic & Standards General General edits & corrections Rev.4.0 Various Significant review to reflect Principal Advisor – Jan 2017 changes to AGRD Part 3 Road Design & Traffic This VicRoads Supplement must be read in conjunction with the Austroads Guide to Road Design. Reference to any VicRoads or other documentation refers to the latest version as publicly available on VicRoads website or other external source VicRoads Supplement to Austroads Guide to Road Design, Part 3 – Rev. 4.0 2 January 2017 Table of Contents References .........................................................................................................5 1. Introduction .............................................................................................6 1.3 Design Criteria ................................................................................................... 6 2. Fundamental Considerations ................................................................6 2.2 Design Parameters .............................................................................................. 6 2.2.2 Road Classification ............................................................................................ 6 2.2.7 Design Vehicle ................................................................................................... 6 2.2.10 Access Management ......................................................................................... 7 3. Speed Parameters ..................................................................................7 3.3 Operating Speeds on Urban Roads ................................................................... 7 3.3.1 Melbourne Arterial Road Network ...................................................................... 7 3.3.2 Metropolitan Freeways/Motorways .................................................................... 7 3.4 Operating Speeds on Rural Roads .................................................................... 8 3.4.1 Major Rural Cities .............................................................................................. 8 3.4.2 Rural Highways and Intermediate/High Speed Rural Roads............................. 8 4. Cross Section ..........................................................................................8 4.1 General 8 4.1.1 Functional Classification of Road Network ........................................................ 8 4.2.4 Traffic Lane Widths ............................................................................................ 8 4.2.5 Urban Road Widths ............................................................................................ 8 4.2.6 Rural Road Widths ............................................................................................. 9 V4.2.7 Over Dimensional (OD) Vehicles ....................................................................... 9 4.3 Shoulders ........................................................................................................ 10 4.3.3 Shoulder Sealing .............................................................................................. 10 4.6 Roadside Drainage .......................................................................................... 14 4.6.4 Kerb and channel ............................................................................................. 14 4.7 Medians 17 4.7.1 Median Width ................................................................................................... 17 4.8.13 Advisory Treatments ........................................................................................ 18 4.9 High Occupancy Vehicle (HOV) Lanes ............................................................ 18 4.9.2 Bus Lanes ........................................................................................................ 18 4.9.3 Tram/Light Rail Vehicle (LRV) Lanes – Tram Track Design Standards .......... 18 4.10 On-street Parking ............................................................................................ 18 4.10.3 Angle Parking ................................................................................................... 18 4.10.4 Centre of Road Parking ................................................................................... 18 4.11 Services Roads, Outer Separators and Footpaths ........................................... 18 4.11.1 Service Roads (from RDG 3.2) ........................................................................ 18 4.11.3 Urban Border ................................................................................................... 18 4.12 Bus Stops ........................................................................................................ 18 4.12.1 General ............................................................................................................ 18 4.12.2 Urban (Indented bus stop bays) ...................................................................... 18 4.12.3 Rural................................................................................................................. 19 VicRoads Supplement to Austroads Guide to Road Design, Part 3 – Rev. 4.0 3 January 2017 5. Sight Distance ....................................................................................... 19 5.1 General 19 5.2 Sight Distance Parameters .............................................................................. 19 5.2.2 Driver Reaction Time ....................................................................................... 19 7. Horizontal Alignment ............................................................................ 20 7.5.1 Compound Curves ........................................................................................... 20 7.7 Superelevation ................................................................................................. 21 7.7.5 Length of superelevation Development ........................................................... 21 7.7.10 Positioning of Superelevation Runoff without Transitions ............................... 22 7.7.11 Positioning of Superelevation Runoff with Transitions .................................... 23 8. Vertical Alignment ................................................................................ 23 8.2.3 Flood Levels or Water Table (from RDG 2.5.4.2) ............................................ 23 8.2.5 Underground Services ..................................................................................... 23 8.5 Grades 24 8.5.3 Maximum Grades ............................................................................................. 24 8.6 Vertical Curves ................................................................................................ 24 8.6.1 General ............................................................................................................ 24 9. Auxiliary Lanes ..................................................................................... 26 9.5 Climbing Lanes ................................................................................................ 26 9.5.1 General ............................................................................................................ 26 9.6 Slow Vehicle Turnouts ..................................................................................... 26 9.6.2 Slow Vehicle Turnouts ..................................................................................... 26 9.9 Geometric Requirements ................................................................................. 27 9.9.2 Tapers .............................................................................................................. 27 9.9.3 Starting and Termination Points ...................................................................... 27 10. Bridge Considerations ......................................................................... 28 10.1 General 28 Appendices ...................................................................................................... 29 Appendix A Extended Design Domain (EDD) for Geometric Road Design ............ 29 Appendix E Narrow Median Treatments with Wire Rope Safety Barrier (WRSB) .. 29 Appendix I Reverse Curves ................................................................................
Load more

Recommended publications
  • Dealer Online Authority to Register This Form Is for Use by Dealers on Dealer Certification Scheme Only
    ABN 61 760 960 480 Dealer online authority to register This form is for use by dealers on Dealer Certification Scheme only. Please complete this form and sign below. Please print clearly in ink using The registered operator of a vehicle cannot be changed unless an BLOCK letters and cross where applicable. You need to provide original documents application for transfer of registration is submitted with applicable for evidence of identity if you do not provide an existing Victorian photo licence fees and supporting documents (eg Certificate of Roadworthiness). or learner permit or confirmed client number. For more information visit vicroads.vic.gov.au Section 1 - Registered operator details (to be completed by the registered operator) Individual Company# *Please provide your Victorian licence/permit/customer number - You will have a customer number with VicRoads Victorian licence/permit/customer no.* if you have held a Victorian licence or learner permit or have had a vehicle registered in your name in Victoria. Surname (or company name) First given name or ACN/ARBN Second given name Third initial (if any) Previous name(s) (if applicable) Date of birth D D M M Y Y Y Y Residential (or company) address Postcode Postal address (if different from above) Postcode Garage address (if different from residential (or company) address) Postcode Mobile phone no. (or other if not applicable) Email Additional information (indicate where applicable) D.S.S. concession D.V.A. concession TPI Health care card Card number ‡ § Primary producer Charitable and benevolent rate Hire/drive Common expiry date D D M M Y Y Y Y Custom/Euro Slimline Govt.
    [Show full text]
  • Part 7: New and Emerging Treatments (2021) Version 2.1, April 2021
    Network Technical Guideline Supplement to Austroads Guide to Road Design (AGRD) Part 7: New and Emerging Treatments (2021) Version 2.1, April 2021 Supplement to Austroads Guide to Road Design Part 7: New and Emerging Treatments (2021) This Supplement must be read in conjunction with the Austroads Guide to Road Design. Reference to any Department of Transport or VicRoads or other documentation refers to the latest version as publicly available on the Department of Transport’s or VicRoads website or other external source. Document Purpose This Supplement is to provide corrections, clarifications and additional information to the Austroads Guide to Road Design Part 7: New and Emerging Treatments (2021). This Supplement refers to the content published in the First Edition of this part to the guide. If this Part to the Austroads Guide to Road Design is updated, or the information is moved to another Austroads publication, then the content in this supplement should be adopted as supplementary content to the current equivalent Austroads content. Where there is conflicting content in this Supplement with updated content, contact the Department of Transport for clarification as to which content takes precedence. Version Date Description of Change V1.0 July 2010 Development of Supplement (VicRoads Supplement for AGRD Part 7) V1.1 Sept 2010 Minor updates and edits to text (VicRoads Supplement for AGRD Part 7) V2.0 Dec 2012 Minor updates and edits to text (VicRoads Supplement for AGRD Part 7) V2.1 April 2021 Interim update to indicate V3.0 coming soon Additional notes on current version VRS Supplement to AGRD Part 7 – Geotechnical Investigation and Design (v2.0) has been withdrawn and superseded by the content in Appendix A of DoT Supplement to AGRD Part 1: Objectives of Road Design (2021).
    [Show full text]
  • Vehicle Registration ABN 61 760 960 480 Please Complete the White Sections, Print in Ink Using BLOCK Letters, Show Us Your Evidence of Identity, and Sign Below
    Vehicle registration ABN 61 760 960 480 Please complete the white sections, print in ink using BLOCK letters, show us your evidence of identity, and sign below. The vehicle register records the identification details of each vehicle and the name and address of the registered operator of the vehicle. The register is not a register of vehicle ownership (title). What type of registration are you applying for? (please cross where applicable) .Dealers write reg’n no. then place VicRoads barcode here Light vehicle Recreation Bus Concessional Heavy vehicle Trailer Taxi Primary producer* Low emission vehicle Farm bike Hire Pensioner/DVA card (tailpipe CO2 of 120g/km Motorcycle Tow truck Health Care card* OFFICE USE ONLY or less) (office use) LAMS approved *You must complete the Date of issue D D M M Y Y Y Y Registration concessions form. Appointment no. Date of expiry D D M M Y Y Y Y Applicant details (the minimum age to register a light vehicle is 16 years, and 18 years to register a motorcycle or heavy vehicle) Surname or company name LMCT no. Vic licence/client no. First given name or ACN/ARBN Second given name Third initial (if any) Gender Health Care Card/ Date of birth D D M M Y Y Y Y Pensioner concession no. Residential (or company) address Postcode Postal address (if different from above) Postcode Garage address (VicRoads will only register vehicles garaged in Victoria) Postcode Mobile phone no. (or other if not applicable) Email Vehicle details (for a trailer, non-standard vehicle or vehicle over 4.5 tonnes GVM, also complete the Trailer and heavy vehicle specifications section overleaf) Please cross one circle per category below Year manufactured Y Y Y Y Previous registration number State Vehicle condition Transmission New Automatic Make Model Second-hand Manual Body type Colour Engine type Fuel type Piston (ie.
    [Show full text]
  • Standard Infrastructure - Tram Stop Platform Design
    Standard Infrastructure - Tram Stop Platform Design CE-021-ST-0012 1.01 17/03/2020 Disclaimer: This document is developed solely and specifically for use on Melbourne metropolitan tram network managed by Yarra Trams. It is not suitable for any other purpose. You must not use or adapt it or rely upon it in any way unless you are authorised in writing to do so by Yarra Trams. If this document forms part of a contract with Yarra Trams, this document constitutes a “Policy and Procedure” for the purposes of that contract. This document is uncontrolled when printed or downloaded. Users should exercise their own skill and care or seek professional advice in the use of the document. This document may not be current. Current standards are available for download internally from CDMS or from https://yarratrams.com.au/standards. Infrastructure - Tram Stop Platform Design Table of Contents 1 PURPOSE ................................................................................................................................................ 4 2 SCOPE .................................................................................................................................................... 4 3 COMPLIANCE ......................................................................................................................................... 4 4 REQUIREMENTS ..................................................................................................................................... 5 4.1 General .........................................................................................................................................
    [Show full text]
  • Vicroads Supplement to the Austroads Guide to Road Design Part 6A – Pedestrian and Cyclist Paths
    VicRoads Supplement to Austroads Guide to Road Design – Part 6A VicRoads Supplement to the Austroads Guide to Road Design Part 6A – Pedestrian and Cyclist Paths NOTE: This VicRoads Supplement must be read in conjunction with the Austroads Guide to Road Design. Reference to any VicRoads or other documentation refers to the latest version as publicly available on the VicRoads website or other external source. Rev. 2.0 – Dec 2012 Part 6A – Page 1 VicRoads Supplement to the Austroads Guide to Road Design Updates Record Part 6A – Pedestrian and Cyclist Paths Rev. No. Section/s Description of Authorised By Date Released Update Revision Rev. 1.0 First Edition Development of ED - Network & Asset July 2010 Supplement Planning Rev. 1.1 Various Minor updates and Principal Advisor- Sept 2010 edits to text Design, Traffic & Standards Rev 2.0 General General edits & Principal Advisor - Road Dec 2012 corrections Design, Traffic & References Additional references Standards and web sites COPYRIGHT © 2010 ROADS CORPORATION. The VicRoads Supplement to the Austroads Guide to Road Design provides additional This document is copyright. No part of it can information, clarification or jurisdiction be used, amended or reproduced by any specific design information and procedures process without written permission of the which may be used on works financed wholly Principal Road Design Engineer of the Roads or in part by funds from VicRoads beyond that Corporation Victoria. outlined in the Austroads Guide to Road Design guides. ISBN 978-0-7311-9159-8 Although this publication is believed to be correct at the time of printing, VicRoads does VRPIN 02671 not accept responsibility for any consequences arising from the information contained in it.
    [Show full text]
  • Vicroads Access Management Policies May 2006 Version 1.02 2 Vicroads Access Management Policies May 2006 Ver 1.02
    1 VicRoads Access Management Policies May 2006 Ver 1.02 VicRoads Access Management Policies May 2006 Version 1.02 2 VicRoads Access Management Policies May 2006 Ver 1.02 FOREWORD FOR ACCESS MANAGEMENT The safe and efficient movement of people and goods plays a key role in the future sustainability of Victoria. The emphasis on using the road network more effectively and efficiently has grown significantly over recent years. With this, the need to manage our existing road space more effectively will be of paramount importance. Access management is a key component to achieving this goal. Access management focuses on ensuring the safety and efficiency of the road network, by providing appropriate access to adjoining properties. This requires a systematic approach to facilitate logical and consistent decision making. This VicRoads Access Management Policies sets out the legislative and practical mechanisms to assist in achieving the above objectives. DAVID ANDERSON CHIEF EXECUTIVE 3 VicRoads Access Management Policies May 2006 Ver 1.02 Table of Contents FORWARD FOR ACCESS MANAGEMENT.............................................................1 PART 1: INTRODUCTION .........................................................................................4 PART 2: USING THE MODEL POLICIES FOR MANAGING VEHICLE ACCESS TO CONTROLLED ACCESS ROADS........................................................................5 2.1 Introduction..........................................................................................................5 2.1.1
    [Show full text]
  • Public Safety Review
    OFFICE OF THE DIRECTOR MELBOURNE CITY LINK DEPARTMENT OF INFRASTRUCTURE Public Safety Review September 2002 CONTENTS Executive Summary iii Findings and Recommendations viii Chapter 1 Introduction Terms of Reference 1 Background to the Review 2 Scope of the Review 2 Methodology of Review 3 Terminology 3 Chapter 2 Background The Project 4 Structure of Transurban 5 Contractual Regime 6 Chapter 3 Term of Reference 1 Contractual Regime 9 Legislation 22 Chapter 4 Term of Reference 2 Introduction and Overview 29 Safety Features of City Link 30 Legal Analysis of Safety Features 35 Other Legal Issues 39 Impact of Proposals on the State 44 Findings 46 Chapter 5 Term of Reference 3 Introduction 48 Context 48 Ongoing State Safety Role 49 Wider Ongoing State Tasks to be Performed 50 Factors for Administration of the City Link Arrangements 53 Models for the Management of the Contractual Arrangements 53 Findings 55 Chapter 6 Term of Reference 4 Overview 57 Preparation, Review and Implementation of Diversion Route Plans 57 Tunnel Closure Procedures 58 Co-ordination Issues 59 Findings 60 Chapter 7 Case Studies Recent European Tunnel Incidents 61 Burnley Tunnel Closure 64 Dislodgement of Rebroadcast Cable 66 Response to a Vehicle Breakdown in the Burnley Tunnel 67 Glossary of Terms 68 Diagrams Map of City Link and the Road Network 72 Map of City Link Road Interchanges 73 Diagram of Contractual Arrangements 74 Public Safety Review Executive Summary Terms of Reference 1. On 9 March 2001, the Minister for Transport, the Hon Peter Batchelor MP, announced a review of the public safety and traffic management aspects of City Link to be conducted by the Melbourne City Link Authority.
    [Show full text]
  • Surfcoast Highway and Corio Waurn Ponds Road, Belmont, Greater Geelong – Bus Lane
    May 2020 Project Evaluation Finding Surfcoast Highway and Corio Waurn Ponds Road, Belmont, Greater Geelong – Bus Lane Project Description This project helped to improve the functionality, efficiency and reduced travel times for Public Transport Victoria (PTV) bus system and users during peak times. More Information For more information please contact: Output Regional Roads VicRoads – South Western Region on 133 778 Project delivered: • Installation of a dedicated bus lane (additional bus traffic signal provides priority access opportunity for the bus to bypass peak traffic queuing) • Line-marking Cost & Duration • The bus jump lane was delivered under the original budget. • The project was delivered on time and within the expected time frames. Working with others During the development of this project, RRV worked with key stakeholders including City of Greater Geelong, Public Transport Victoria, McHarry’s Bus Lines, Utility authorities and the general community including businesses and residents. Figure 1 – Before Benefits Achieved Improved Road Safety • Safer Public Transport network for busses when merging into through traffic with a clear lane to the front and cross the intersection prior to other vehicles. Bus jump lanes not only improved the travel times, but also more consistent and more usage. Improved transport efficiency • Increased the Public Transport reliability along the route, it also decreased the travel time as the traffic built up. Travel time data indicates that travel time for busses have been recused by 45 seconds in the AM peak and 1.48 seconds in the PM peak. Figure 2 – After .
    [Show full text]
  • Application for Transfer of Registration
    Application for transfer of registration This form is to be used to change the registered operator(1) of a currently registered(2) vehicle (e.g. car, motorcycle, caravan) with Victorian number plates attached. This form must be completed and signed by both the seller(3) and the buyer(4) and returned to VicRoads within 14 days of vehicle sale. You can now transfer your vehicle online! Sellers must first submit an online Notice of Disposal via their myVicRoads account. Once the vehicle has been transferred, buyers complete the transfer in their myVicRoads account by providing the roadworthy certificate and paying the transfer fee and motor vehicle duty (if applicable). Pre-transfer checklist Seller Buyer Vehicle status Confirm the Victorian registration is current (not suspended or cancelled) and not subject to any sanctions that will prevent the registration transfer. Refer to vicroads.vic.gov.au/registration-check Confirm that there is no money owing on the vehicle, it’s not reported stolen or recorded as written-off. Check the Personal Property Security Register (PPSR) online at ppsr.gov.au or call 1300 007 777. Right to transfer Confirm the seller has the right to transfer the vehicle by sighting a certificate of registration/renewal or by confirming the vehicle is recorded in the seller’s myVicRoads account. Check the details, including the Vehicle Identification Number (VIN)(5), match the physical vehicle. Confirm the buyer (individual or company) has a Victorian licence/customer number(6). If the buyer does not have a Victorian licence/customer number, full evidence of identity documentation must be provided in person at a VicRoads Customer Service Centre.
    [Show full text]
  • Palmers Road Corridor (Western Freeway to Calder Freeway) EES and Psas
    VicRoads 28-Aug-2014 Doc No. Version 6 Palmers Road Corridor (Western Freeway to Calder Freeway) EES and PSAs Land Use Planning Report AECOM Palmers Road Corridor (Western Freeway to Calder Freeway) EES and PSAs – Land Use Palmers Road Corridor (Western Freeway to Calder Freeway) EES and PSAs Land Use Planning Report Client: VicRoads Prepared by AECOM Australia Pty Ltd Level 9, 8 Exhibition Street, Melbourne VIC 3000, Australia T +61 3 9653 1234 F +61 3 9654 7117 www.aecom.com ABN 20 093 846 925 28-Aug-2014 Job No.: 60267382 AECOM in Australia and New Zealand is certified to the latest version of ISO9001, ISO14001, AS/NZS4801 and OHSAS18001. © AECOM Australia Pty Ltd (AECOM). All rights reserved. AECOM has prepared this document for the sole use of the Client and for a specific purpose, each as expressly stated in the document. No other party should rely on this document without the prior written consent of AECOM. AECOM undertakes no duty, nor accepts any responsibility, to any third party who may rely upon or use this document. This document has been prepared based on the Client’s description of its requirements and AECOM’s experience, having regard to assumptions that AECOM can reasonably be expected to make in accordance with sound professional principles. AECOM may also have relied upon information provided by the Client and other third parties to prepare this document, some of which may not have been verified. Subject to the above conditions, this document may be transmitted, reproduced or disseminated only in its entirety. 28-Aug-2014
    [Show full text]
  • Vicroads Purpose, Aims and Organisational Values
    VICROADS PURPOSE, AIMS AND ORGANISATIONAL VALUES PURPOSE To serve the community by managing the Victorian road network and its use as an integral part of the overall transport system. VicRoads, in partnership with other State and Federal Government agencies, local government and the private sector, contributes to the social and economic development of Victoria and Australia through its role in management of the transport system. AIMS > To assist economic and regional development by improving the effectiveness and efficiency of the transport system. > To assist the efficient movement of people and freight, and improve access to services for all transport system users. > To achieve a substantial reduction in the number and severity of road crashes and the resultant cost of road trauma. > To be sensitive to the environment through responsible management of the transport network. > To provide efficient and effective, nationally consistent, customer-oriented driver licensing, vehicle registration, revenue collection, and driver and vehicle information services. ORGANISATIONAL VALUES > We put our customers’ and stakeholders’ needs first. > We develop as individuals and contribute as members of a team. > We are open, honest and fair. > We take pride in our success and continuous improvement. > We take responsibility for our actions. > We take a commercial approach to our service delivery. 3 LETTER TO THE MINISTER THE HONORABLE PETER BATCHELOR MP MINISTER FOR TRANSPORT LEVEL 26, NAURU HOUSE 80 COLLINS STREET MELBOURNE VICTORIA 3000 Dear Minister VicRoads 2001–02 Annual Report I have much pleasure in submitting to you, for presentation to Parliament, the Annual Report of the Roads Corporation (VicRoads) for the period 1 July 2001 to 30 June 2002.
    [Show full text]
  • Citylink Melbourne
    CITYLINK, MELBOURNE, AUSTRALIA OVERVIEW LOCATION : MELBOURNE, AUSTRALIA SCOPE: INTRA -URBAN TRANSPORT MODE: ROAD PRINCIPAL CONSTRUCTION: GRADE/TUNNEL/ELEVATED NEW LINK : PARTIALLY PRINCIPAL OBJECTIVES CONGESTION RELIEF LOCAL & STRATEGIC TRANSPORT LINK ACCESSIBILITY LOCAL AREA IMPROVEMENTS INTRODUCTION PLANNING AND IMPLEMENTATION PLANNING START DATE: 03/1992 CityLink is a 22km road scheme in two sections. The Western Link CONSTRUCTION START DATE: 05/1996 upgrades an existing freeway to eight lanes and adds a six-lane OPERATION START DATE: 12/2000 elevated road and bridge crossing over the River Yarra. The MONTHS IN PLANNING: 38 MONTHS IN CONSTRUCTION: 55 Southern Link upgrades an arterial roadway to five and six lanes, and PROJECT COMPLETED: IN 8 SECTIONS, provides two three-lane tunnels (of 3.4km and 1.6 km in length) ON AVERAGE 2.5 MONTHS BEHIND under the Yarra. It opened in 2000. Toll charges are collected SCHEDULE (MAXIMUM 12 MONTHS) through an electronic system developed as part of the project. COSTS (IN 2010 USD) The project is associated with the redevelopment of unused PREDICTED COST: 2.80BN docklands between the central business district and the Yarra, and ACTUAL COST: 2.46BN PROJECT COMPLETED: 12% UNDER the expansion of container traffic through the port. BUDGET FUNDING : 100% PRIVATE BACKGROUND The primary objective of the project was to relieve congestion in the city centre, by linking the existing radial highways and bypassing the centre’s urban and residential streets. This in turn would improve the urban environment and provide better access for industry to port, rail and airport facilities. INFRASTRUCTURE QUANTITIES LENGTH: 22KM The project was supported by a variety of national and state NUMBER OF JUNCTIONS: 10 government policy statements relating to transport and urban BRIDGE: 4.2KM development between 1987 and 1992.
    [Show full text]