DOCSLIB.ORG

White Spirit (Stoddard Solvent) Health and Safety Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
White Spirit (Stoddard Solvent) Health and Safety Guide Cs INTERNATIONAL PROGRAMME ON CHEMICAL SAFETY Health and Safety Guide No. 103 WHITE SPIRIT (STODDARD SOLVENT) HEALTH AND SAFETY GUIDE UNEP UNITED NATIONS INTERNATIONAL ENVIRONMENT PROGRAMME LABOUR ORGANISATION V. t VA• 5 iJ . WORLD HEALTH AT ORGANIZATION WORLD HEALTH ORGANIZATION, GENEVA 1996 Other hEALTh ANI) SAlE FY (1 'IDES available: corn i nued on the ns ,,k' b;c. k cc er Acetaldehyde (No. 'Xl). 199 Dimethoate (No. 20, 1988) Acrolein (No. 67. 1992) Dimelhvl sulfate (No. 29. 1989) Aervlamide (No. 45, 199 Dunet.hvlarsinic acid, niethanearsonic Acrylonitrile (No. I, I 986 acid, and salts (No. 69, 1992) Aldicarb(No. 64. 1991) Dimethylformamide (N,c 43, I 09(1) Akirin and dieldrin No. 21 988) Diquat (No. 52, 1991 Allethrins (NO. 24. 1989) Endosulfan (No. 17. 1988) Amitrolt' (No 85, 1994) Endrin NI'. 60. 1991) Atnunnia (No 37, 1990> I pic hloroh\'dr in (No 8. 1987) Arsenic c Itilpounds inorganic tIler Ethylene oxide (NI'. 1(, 1988) than arsine i No 7)), 992 Fenitrothion (NI' 65. 11)1)11 ;\traztt)e No 47 109M Fenvaleratc' I No 34. 1989) l)arrurn No 46. 1091 I'olpet (No. 72, 1992 f3etIIit'ii. I NI) 81. 199 I'orrnaIdeh de (No 57. l'))I l3etitazoi,e NI' .18, (')')( I leptachlor ( N,' 14 . 1989 ller Ilium i No 4 (, 1990 Ilexachlorohifladienc I No 8), '1') l(tIldilaL')uttl N 0, I ((5 I kxachIoroc clohes,,ties . alpha und I)rliuialtkltie i No 94 beta- (NO. 53. 1991 I F4utanol (No 4 1987 I lexachlorocyclopcirtadene 2-l3utanol No 1 1987 (NO. 63. ('8)1; iert-l3ut,u,ol _ ti-I lesane ( NI) SI) 1991 (.atlqlheclilt 49. 1900, I Lydrazine I No. So. (0911 (apUito1 No -1 1) 199(1 Ilydroquinone IN,' 1(11 . 0069 ('aptan No 50. 199(9 lsohenzan (Ni) Iii . 19') ('arbars I No 78, I 'N) Isohutanol (No. 1), 19871 (Thrhendaitin i No 82, 1993 Isophorone >No. VI. 19951 Chlordane (No. I). 1 '(88 Kelesati >N,i. 2. 1987 ('hlordecorie Ni 41. 1990) l.indane (No. 54, 1991) (,'hlorofortn No 87. 1995) Magnetic fields (NO. 27. 19909 ("hlorothalonil (No. 9$. 1995 Methantidophos (No. 79. 1993 Eresols (No. 100. 99(') Methou,vl i N,'. 97, 1995) Cvhalothrin and Iarnhda-cvlialotlirin Methyl bromide Bromontethanc NO. 38. 1990( (NI). 86, 1995) {'spermethrin No. 22, 1988) Methyl isohutyl kelone (No.58, 1991 Deltamethrin (No. 30, 1989) Methyl parathion (No. 75. 1992) 1 ,2-Dieliloroethane (No.55. 1991 Methylene chloride (No, 6, 1987) 2,4-I)ichlorophenoxvacetic ae,d(2.4 I) Mires (N,' 39, 1990) (NI). 5, 1987) Monocrotophos (No. 80. 1993( 1, 3-Dichloroproperie. Morpholinc (No. 92. 1995) 1,2 dichloroproparic, and Nickel, nickel carhotw I. and s, tile ii kel trttxtiit es of 1.3 dieli!oropropet,eaiid cotttpoiittds No. 62, 1991) .2-il ich loropropane No. 7 . 10')) I'araquat (NO SI, ( 1)1)1) l)ichlorvos i No IS 19881 Pai (1)10011 (No 71. 1)92) Difen:,,iurn i No 95 1)1)5 I'et,tachloroplieiioh(No I), 1)88, Difluhen7uroii No 00, I Pcrmethnn iNo 33. 1489 IPcs Health and Safety Guide No. 103 WHITE SPIRIT (STODDARD SOLVENT) HEALTH AND SAFETY GUIDE This is a companion volume to Environmental Health Criteria 187: White Spirit Published by the World Health Organization for the International Programme on Chemical Safety (a collaborative programme of the United Nations Environment Programme, the International Labour Organisation, and the World Health Organization) and produced within the framework of the Inter-Organization Programme for the Sound Management of Chemicals WORLD HEALTH ORGANIZATION, GENEVA 1996 This report contains the collective views of an international group of experts and does not necessarily represent the decisions or the stated policy of the United Nations Environment Programme, the International Labour Organisation, or the World Health Organization. WHO Library Cataloguing in Publication Data White Spirit (Stoddard solvent): health and safety guide. (Health and safety guide no. 103) 1.Solvents - adverse effects 2.Solvents - toxicity 3.Environmental exposure I.Series ISBN 92 4 151103 6 (NLM Classification: QV 633) ISSN 0259-7268 The World Health Organization welcomes requests for permission to reproduce or translate its publications, in part or in full. Applications and enquiries should be addressed to the Office of Publications, World Health Organization, Geneva, Switzerland, which will be glad to provide the latest information on any changes made to the text, plans for new editions, and reprints and translations already available. ° World Health Organization 1996 Publications of the World Health Organization enjoy copyright protection in accordance with the provisions of Protocol 2 of the Universal Copyright Convention. All rights reserved. The designations employed and the presentation of the material in this publication do not imply the expression of any opinion whatsoever on the part of the Secretariat of the World Health Organization concerning the legal status of any country, territory, city or area or of its authorities, or concerning the delimitation of its frontiers or boundaries. The mention of specific companies or of certain manufacturers' products does not imply that they are endorsed or recommended by the World Health Organization in preference to others of a similar nature that are not mentioned. Errors and omissions excepted, the names of proprietary products are distinguished by initial capital letters. The Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (Federal Republic of Germany) provided financial support for, and undertook the printing of, this publication Printed by Wissenschaftliche Verlagsgesellschaft mbH D-70009 Stuttgart 10 CONTENTS 1. PRODUCT IDENTITY AND USES 7 • 1 Identity 7 1.2 Physical and chemical properties 8 1.3 Analytical methods 8 1.4 Production and uses 10 2. SUMMARY AND EVALUATION 11 2.1 Environmental transport, distribution and transformation 11 2.2 Environmental levels and human exposure 11 2.3 Kinetics and metabolism 12 2.4 Effects on laboratory and in vitro systems 12 2.5 Effects on humans 14 2.6 Effects on other organisms in the laboratory and field 16 3. CONCLUSIONS AND RECOMMENDATIONS 18 3.1 Conclusions 18 3.2 Recommendations 18 4. HUMAN HEALTH HAZARDS, PREVENTION AND PROTECTION, EMERGENCY ACTION 19 4.1 Human health hazards, prevention and protection, first aid 19 4.1.1 Advice to physicians 19 4.1.2 Health surveillance advice 19 4.2 Explosion and fire hazards 20 4.3 Storage 20 4.4 Transport 20 4.5 Spillage and disposal 20 5. HAZARDS FOR THE ENVIRONMENT AND THEIR PREVENTION 21 SUMMARY OF CHEMICAL SAFETY INFORMATION 23 CURRENT REGULATIONS, GUIDELINES, AND STANDARDS 26 7.1 Previous evaluations by international bodies 26 7.2 Exposure limit values 27 7.3 Labelling, packaging and transport 27 BIBLIOGRAPHY 29 3 INTROIUCTION The Environmental Health Criteria (EHC) monographs produced by the International Programme on Chemical Safety include an assessment of the effects on the environment and on human health of exposure to a chemical or combination of chemicals, or physical or biological agents. They also provide guidelines for setting exposure limits. The purpose of a Health and Safety Guide is to facilitate the application of these guidelines in national chemical safety programmes. The first three sections of a Health and Safety Guide highlight the relevant technical information in the corresponding EHC. Section 4 includes advice on preventive and protective measures and emergency action; health workers should be thoroughly familiar with the medical information to ensure that they can act efficiently in an emergency. Within the Guide is a Summary of Chemical Safety Information which should be readily available, and should be clearly explained, to all who could come into contact with the chemical. The section on regulatory information has been extracted from the legal file of the International Register of Potentially Toxic Chemicals (IRPTC) and from other United Nations sources. The target readership includes occupational health services, those in ministries, governmental agencies, industry, and trade unions who are involved in the safe use of chemicals and the avoidance of environmental health hazards, and those wanting more information on this topic. An attempt has been made to use only terms that will be familiar to the intended user. However, sections 1 and 2 inevitably contain some technical terms. A bibliography has been included for readers who require further background information. Revision of the information in this Guide will take place in due course, and the eventual aim is to use standardized terminology. Comments on any difficulties encountered in using the Guide would be very helpful and should be addressed to: The Director International Programme on Chemical Safety World Health Organization 1211 Geneva 27 Switzerland THE INFORMATION IN THIS GUIDE SHOULD BE CONSIDERED AS A STARTING POINT TO A COMPREHENSIVE HEALTH AND SAFETY PROGRAMME 1. PRODUCT IDENTITY AND USES 1.1 Identity Common names: white spirit, Stoddard solvent. White spirit is a mixture of saturated aliphatic and alicyclic C7 to C 2 hydrocarbons with a maximum content of 25% of C7 to C 12 alkyl aromatic hydrocarbons. Molecular formulae: CH22 (n-alkanes and isoalkanes) 2 C5H25 (cycloalkanes)5 C1126 (aromatics), n > 6 Relative molecular mass: 150 (Approximate average value) 92-170 (for single constituents) Common synonyms: Lacknafta (Sweden); Lakkibensiini (Finland); Mineral Spirit; Mineral Turpentine; Mineralsk Terpentin (Denmark); Mineralterpentin (Sweden); Petroleum Spirits; Solvent Naphtha; Stoddard solvent; Terpentin (Denmark); Testbenzin (Germany); Turpentine Substitute. Common trade name: B.A.S.; C.A.S.; Clairsol; Dilutine; Exxsol; Halpasol; Hydrosol; Indusol; Sane; Kristalloel; Laws; Ragia; Sangajol; Shellsol; Solfina; Solnap; Solvesso; Spezialbenzin; Spirdane; Spraysol; Stoddard Solvent; Supersol; Terpentina; Tetrasol; Thersol; Varnolene; Varsol; W.S.; White Spirit. Aliphatic alkanes are also known as "paraffins", while "naphthenes" is a commonly used term for cycloalkanes. PRODUCT IDENTITY AND USES CAS registry number: 8052-41-3 (Stoddard solvent); 64742-82-I (white spirit type 1); 64741-92-0 (white spirit type 2); 64742-48-9 (white spirit type 3); 64742-88-7 (white spirit type 0).
Load more

Recommended publications
  • Cognitive Tests Used for Evaluation of Neurotoxic Effects of Organic Solvent in Rats
    Cognitive tests used for evaluation of neurotoxic effects of organic solvents in rats. Ph.D. Thesis Grete Ostergaard Roskilde Universitet Levnedsmiddelstyrelsen Department of Life Sciences National Food Agency of Denmark and Chemistry Institute of Toxicology DATA SHEET Title: Cognitive tests used for evaluation of neurotoxic effects of organic solvents in rats. Author: Grete 0stergaard Publisher: National Food Agency of Denmark Affiliation: Institute of Toxicology, Department of General Toxicology, National Food Agency of Denmark, Ministry of Health. Address: M@rkh@jBygade 19, DK-2860 Sgborg, Denmark Telephone: +45 39 69 66 00 Fax: +45 39 66 01 00 Please quote: Grete 0stergaard (1997): Cognitive tests used for evaluation of neurotoxic effects of organic solvents in rats. Ph.D. thesis. National Food Agency of Denmark, DK-2860, Soborg, Denmark. Keywords: Morris water maze, eight-arm radial maze, cognitive tests ISBN: 87-601-1745-l List of contents 1 PREFACE . 5 2 ACKNOWLEDGEMENTS . 6 3 LIST OF PAPERS INCLUDED . 7 4 OTHER PAPERS WITH RELATION TO THE SUBJECT OF THIS . 8 5 SUMMARY . 9 6 DANSK SAMMENDRAG . 10 7 INTRODUCTION . 11 8 ORGANIC SOLVENTS ........................... 14 8.1 Effects of solvents on the nervous system in man .................................. 15 8.2 Solvents involved in the development of chronic toxic encephalopathy ............... 16 8.3 Toluene ................................ 18 8.4 Effects of toluene in man ................... 18 8.5 Behavioural effects of toluene in laboratory animals ............................... 19 8.6 White spirit ............................ 23 8.7 Effects of white spirit in man ............... 23 8.8 Effects of white spirit in animals .............. 25 9 CHOICE OF EXPOSURE IN THE PRESENT PROJECT . 28 10 CHOICE OF TIME OF TESTING RELATIVE TO EXPOSURE IN THE PRESENT PROJECT .
    [Show full text]
  • Stoddard Solvent 9
    STODDARD SOLVENT 9 2. HEALTH EFFECTS 2.1 INTRODUCTION The primary purpose of this chapter is to provide public health officials, physicians, toxicologists, and other interested individuals and groups with an overall perspective of the toxicology of Stoddard solvent and a depiction of significant exposure levels associated with various adverse health effects. It contains descriptions and evaluations of studies and presents levels of significant exposure for Stoddard solvent based on toxicological studies and epidemiological investigations. Stoddard solvent is a mixture of numerous hydrocarbons derived by refining crude oil. It is a petroleum distillate with a boiling range of 154-202°C and a flashpoint of 38-60°C. The hydrocarbon chain length ranges from C7 to C12 although a form of Stoddard solvent called 140 flash contains C5 and C6 hydrocarbons as well. The mixture consists of three major groups of components: linear and branched alkanes, also known as paraffins (30-50% of the total mixture); cycloalkanes, also called cycloparaffins or naphthenes (not to be confused with naphthalenes which are bicyclic aromatics) (30-40%), and aromatic hydrocarbons (l0-20%). A complete list of the individual components of Stoddard solvent is not available (Air Force 1989b); however, some possible components and common hydrocarbon classes are presented in Chapter 3. Data are available on the health effects of the various components of Stoddard solvent, but discussion of individual constituents is beyond the scope of the profile. Exposure to Stoddard solvent and white spirits, a somewhat synonymous substance, is discussed in this profile. Stoddard solvent is also considered to be a form of mineral spirits, white spirits, and naphtha; however, not all forms of mineral spirits, white spirits, or naphtha are considered to be Stoddard solvent.
    [Show full text]
  • The Dynisco Extrusion Processors Handbook 2Nd Edition
    The Dynisco Extrusion Processors Handbook 2nd edition Written by: John Goff and Tony Whelan Edited by: Don DeLaney Acknowledgements We would like to thank the following people for their contributions to this latest edition of the DYNISCO Extrusion Processors Handbook. First of all, we would like to thank John Goff and Tony Whelan who have contributed new material that has been included in this new addition of their original book. In addition, we would like to thank John Herrmann, Jim Reilly, and Joan DeCoste of the DYNISCO Companies and Christine Ronaghan and Gabor Nagy of Davis-Standard for their assistance in editing and publication. For the fig- ures included in this edition, we would like to acknowledge the contributions of Davis- Standard, Inc., Krupp Werner and Pfleiderer, Inc., The DYNISCO Companies, Dr. Harold Giles and Eileen Reilly. CONTENTS SECTION 1: INTRODUCTION TO EXTRUSION Single-Screw Extrusion . .1 Twin-Screw Extrusion . .3 Extrusion Processes . .6 Safety . .11 SECTION 2: MATERIALS AND THEIR FLOW PROPERTIES Polymers and Plastics . .15 Thermoplastic Materials . .19 Viscosity and Viscosity Terms . .25 Flow Properties Measurement . .28 Elastic Effects in Polymer Melts . .30 Die Swell . .30 Melt Fracture . .32 Sharkskin . .34 Frozen-In Orientation . .35 Draw Down . .36 SECTION 3: TESTING Testing and Standards . .37 Material Inspection . .40 Density and Dimensions . .42 Tensile Strength . .44 Flexural Properties . .46 Impact Strength . .47 Hardness and Softness . .48 Thermal Properties . .49 Flammability Testing . .57 Melt Flow Rate . .59 Melt Viscosity . .62 Measurement of Elastic Effects . .64 Chemical Resistance . .66 Electrical Properties . .66 Optical Properties . .68 Material Identification . .70 SECTION 4: THE SCREW AND BARREL SYSTEM Materials Handling .
    [Show full text]
  • Oil Statistics
    Joint SPC-APEC Training Workshop on Energy Statistics and Modeling for the SDG7 and the COP21 INDC Energy Targets 20-23 June 2016 Port Moresby Oil Statistics Edito Barcelona Energy Statistics and Training Office Asia Pacific Energy Research Centre Outline • Introduction A few concepts e.g. refining, units, conversion, etc • Definitions of Products Primary Products Secondary Products • Definitions of Flows Primary Supply Transformation Final Consumption 2 Oil and Oil Products • 25 product categories: • crude oil, NGL, refinery feedstocks, additives/oxygenates, biofuels, other hydrocarbons, • ethane, refinery gas, LPG, naphtha, motor gasoline, biogasoline, aviation gasoline, jet gasoline, jet kerosene, other kerosene, gas/diesel oil, biodiesel, fuel oil, white spirit, lubricants, bitumen, paraffin waxes, petroleum coke and other products. 3 Primary Oil Products 4 Crude Oil • 1. Crude Oil Oil is a mineral oil of fossil origin extracted by conventional means from underground reservoirs, and comprises liquid or near- liquid hydrocarbons and associated impurities such as sulphur and metals. It exists in the liquid phase under normal surface temperature and pressure, and usually flows to the surface under the pressure of the reservoir. This is termed “conventional” extraction. Crude oil includes condensate from condensate fields, and “field” or “lease” condensate extracted with the crude oil. • Issues and Difficulties in reporting Crude Oil • Usually there are not too many problems in applying the definition. Quality: crude oil can be of varying quality, colour, viscosity and mineral content. The two main factors determining the quality are the density and the sulfur content. Density: Heavy crudes will yield less light products and are therefore in general of lesser quality.
    [Show full text]
  • An Investigation of the Use of Solvent Gels for the Removal of Wax-Based Coatings from Wall Paintings
    Conservation of Wall Painting Department COURTAULD I NSTITUTE OF ART Somerset House, Strand, London WC2R 0RN Telephone +44 (0)20 7848-2848 [email protected] This is a dissertation accepted for a Postgraduate Diploma in the Conservation of Wall Painting in the Conservation of Wall Painting Department, Courtauld Institute of Art, University of London. It is unpublished and copyright is held by the author. No quotations or information derived from it may be published without the prior written consent of the author, who may be contacted through the address above. AN INVESTIGATION OF THE USE OF SOLVENT GELS FOR THE REMOVAL OF WAX-RASED COATINGS FROM WALL PAINTINGS TOBIT CURTEIS Courtauld Institute ofArt/Getty Conservation Institute, Conservation of Wall Paintings Department. July 1991 CONTENTS Acknowledgements. 1. Summary. 2. Introduction. 3. Solvent Gel Principles. 4. Gel Components. 4.1 Carbopol 4.1.1 Thickening mechanisms of Carbopol. 4.1.2 Amines for Neutralisation. 4.1.3 Surfactants. 4.1.4 Clearance. 4.1.5 Possible drawbacks with Carbopol. 4.2 Pemulen. 4.2.1 Thickening mechanisms of Pemulen. 4.2.2 Drawbacks of Pemulen. 4.3 Cellulose materials 5. Desiderata for Test Sites. 6. Test Methodology and Procedure. 6.1 Examination and Analysis. 6.2 Preparation of Carbopol gels. 6.3 Test Procedure. 6.4 Clearance Tests. 7. Holcot Church. 7.1 Introduction. 7.2 Painting Condition. 7.3 Cross-section analysis and SEM. 7.4 FTIR and Thermomicroscopy. 7.5 Solvency parameter tests. 7.6 Solvent gel tests. 8. The Holy Sepulchre Chapel, Winchester Cathedral. 8.1 Introduction.
    [Show full text]
  • Brochure Fractional Distillation Units GB
    FRACTIONAL DISTILLATION UNITS Professional Industrial Qualified Formeco s.r.l. Via Cellini, 33 35027 Noventa Padovana Padova – Italy – www.formeco.com FRACTIONAL DISTILLATION COUMNS Fractionating columns are units for fractional distillation, which allow the separation of solvents which differ in their boiling point and the almost total separation of solvents from liquid pollutants. The fractional distillation process makes it possible to obtain a sufficiently pure liquid for its integral reuse in its original processes. The plant consists of a boiler heated indirectly by diathermic oil or different energy sources (steam for example). The diathermic oil is placed in forced circulation inside an external shell around the boiler and in an inner coil. A fractionating column fitted with anti-splash devices and high-efficiency packing material is installed in the upper part of the boiler in order to favour washing in the steam-liquid counterflow. A head condenser makes it possible to regulate the forced reflux in the column in order to support the separation of the various components of the mixture being treated. The vacuum group consist of a liquid ring pump on treatment in closed circuit, contained in a dedicated cooled tank, equipped with a special vapour condenser EGC - Exhausted Gas Condenser, placed on the way out of the vacuum pump. The plant can work 24 hours a day, with automatic loading of the liquid to treat, automatic unloading of the distillate and of the process residue. A special pc-board with display sets the diathermic oil temperature, the temperature inside the boiler and the temperature on the head of the column, with possibility to set the oil temperature with respect to the head temperature for regulating the distillation speed.
    [Show full text]
  • Three Weeks' Exposure of Rats to Dearomatized White Spirit Modifies Indices of Oxidative Stress in Brain, Kidney, and Liver
    Biochemical Pharmacology, Vol. 47, No. 4, pp. 651~57, 1994. Copyright © 1994 Elsevier Science Ltd ti)Pergamon Printed in Great Britain. All rights reserved 0006-2952/94 $6.00 + 0.00 0006-2952(93)E0017-2 THREE WEEKS' EXPOSURE OF RATS TO DEAROMATIZED WHITE SPIRIT MODIFIES INDICES OF OXIDATIVE STRESS IN BRAIN, KIDNEY, AND LIVER H. R. LAM,*t G. 0sTERGAARD,t S. X. Guo,:j: 0. LADEFOGEDt and S. C. BoNDY:j: tlnstitute of Toxicology, National Food Agency of Denmark, DK-2860 S0borg, Denmark, and iDepartment of Community and Environmental Medicine, University of California, Irvine, CA 92717-1825, U.S.A. (Received 19 July 1993; accepted 15 October 1993) Abstract-The present study was undertaken in order to investigate whether dearomatized white spirit induces indices of oxidative stress in subcellular fractions of hemisphere, hippocampus, kidney and liver tissue of rats exposed to 0, 400 and 800ppm 6 hr/day, 7 days a week for 3 weeks. The results show that white spirit is a strong in vivo inducer of oxidative stress in subcellular fractions of brain, kidney and liver. In the liver there was a statistically significant increase in the rate of reactive oxygen species (ROS) generation and a decrease in glutamine synthetase activity. In the kidney there was a statistically significant decrease in the rate of ROS generation. In the hemisphere there was a statistically significant increase in the level of reduced glutathione. In the hippocampus there was a statistically significant increase in the rate of ROS generation. However, in vitro addition of dearomatized white spirit had no effect on the rate of cerebrocortical P2 fraction ROS generation.
    [Show full text]
  • Using Fluorochromised Gelatine to Visualise the Sealing E Ect Of
    DOI: 1234567890 Published: 6 November 2018 Using uorochromised gelatine to visualise the sealing eect of cyclododecane during re-adhesion of aking paint on canvas Karolina Soppa When working with low viscosity adhesives on canvases without a sizing layer, it is advisable to mask the canvas prior to consolidation (for example with CDD solutions). The use of uorochrome-labelled gelatine (type A, 180 Bloom 5% w/w in distilled water) in combination with uorescence microscopy allows the sealing eect of various methods of cyclododecane (CDD) application to be visualised, in order to optimise the techniques for re-adhesion of aking paint on canvas. As solvents for CDD, petroleum ether (boiling point <40 °C) and white spirit (b.p. 100–140 °C) have delivered positive results. The observed adhesion was best when using CDD in petroleum ether <40 °C. However, from a practical point of view, the handling of CDD in white spirit 100–140 °C is easier, the penetration is laterally wider and therefore the sublimation faster. Application of solid CDD either as chips or with a spray can (both worked in using a heated spatula on the reverse of the canvas) produced irregular and poorly reproducible results. There is a signicant dierence between the two CDD application techniques: if the paint has no contact with the canvas, the CDD solution stops at the canvas interface, whereas melts can penetrate further, embedding the bres entirely and even lling the joints – or they do not reach the interface. A further important practical observation is that there should be no contact with the reverse of the canvas during application of the adhesive since this contact increases capillary forces, allowing the adhesive to penetrate more easily towards the other side.
    [Show full text]
  • Occupational Chronic Solvent Encephalopathy in Finland 1995 2007
    Petra Keski-Säntti Petra Keski-Säntti During recent decades, the number of solvent-exposed workers Occupational chronic solvent and solvent exposure in many work tasks has diminished. This Occupational chronic solvent encephalopathy in Finland 1995–2007: incidence and diagnostic methods has led to a decrease in the number of occupational chronic encephalopathy in Finland 1995–2007: solvent encephalopathy (CSE) patients, but still every year reveals new cases. incidence and diagnostic methods This book presents the incidence of CSE in Finland during 1995–2007 and the work tasks and solvent exposure related to CSE. It also presents the findings in brain magnetic resonance imaging, electroencephalography, and event-related potentials and discusses their diagnostic value in CSE. Orders: Finnish Institute of Occupational Health Topeliuksenkatu 41 a A FI-00250 Helsinki Finland Fax +358-9 477 5071 E-mail [email protected] www.ttl.fi/bookstore ISBN 978-952-261-082-9 (paperback) 978-952-261-083-6 (PDF) ISSN-L 1237-6183 ISSN 1237-6183 94 Cover picture: People and Work Suomen kuvapalvelu / Science foto library Research Reports 94 People and Work Editor in chief Harri Vainio Scientific editors Raoul Grönqvist Irja Kandolin Timo Kauppinen Kari Kurppa Anneli Leppänen Hannu Rintamäki Riitta Sauni Editor Virve Mertanen Address Finnish Institute of Occupational Health Topeliuksenkatu 41 a A FI-00250 Helsinki Tel. +358- 30 4741 Fax +358-9 477 5071 www.ttl.fi Cover design Tiina Vaahtera Cover Picture Suomen kuvapalvelu / Science foto library ISBN 978-952-261-082-9
    [Show full text]
  • White Spirit Incident Management
    White Spirit Incident Management Key Points Fire flammable reacts with strong oxidants, causing a fire and explosion hazard; attacks some forms of plastics, rubber and coatings emits acrid fumes and may explode when heated to decomposition in the event of a fire involving white spirit, use normal foam and normal fire kit with breathing apparatus Health ingestion causes nausea, vomiting and abdominal pain systemic symptoms include drowsiness, lethargy, ataxia, convulsions, cardiac arrhythmias, coma and respiratory collapse aspiration into the lungs causes pneumonitis with initial choking, gasping, coughing and haemoptysis inhalation may cause nausea, vomiting, headache, dizziness, respiratory tract irritation, euphoria, delirium, tremor, lethargy, ataxia and drowsiness dermal exposure can cause irritation, drying, cracking, erythema and blistering; rarely, systemic toxicity may arise ocular exposure may cause irritation to the eyes, causing an immediate stinging and burning sensation with lacrimation Environment avoid release to the environment; inform the Environment Agency of substantial incidents PHE publications gateway number: 20144790 Published: January 2016 Compendium of Chemical Hazards: White Spirit Hazard Identification Standard (UK) dangerous goods emergency action codes Turpentine substitute, packing group II UN 1300 Turpentine substitute, packing group II EAC 3YE Use normal foam. Wear normal fire kit in combination with breathing apparatus*. Spillages and decontamination run-off should be prevented from entering
    [Show full text]
  • Bleko - Turpentine / White Spirit 1010100
    Safety data sheet According to 1907/2006/EC (REACH), 453/2010/EU, 2015/830/EU Bleko - Turpentine / White Spirit 1010100 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifier: Bleko - Turpentine / White Spirit 1010100 Hydrocarbons, C9-C12, n-alkanes, isoalkanes, cyclics, aromatics (2-25%) CAS: Non-applicable EC: 919-446-0 Index: Non-applicable REACH: 01-2119458049-33-XXXX 1.2 Relevant identified uses of the substance or mixture and uses advised against: Relevant uses: Cleaning solvent; solvent for coatings Uses advised against: All uses not specified in this section or in section 7.3 1.3 Details of the supplier of the safety data sheet: Bleko Chemie BV Het Lentfert 3 7547 SN Enschede - Netherlands Phone.: +31 (0)53 431 58 35 - Fax: +31 (0)53 431 54 30 [email protected] www.blekochemie.nl 1.4 Emergency telephone number: +31 (0)534 315 835 ( 8:00 - 17:00 ) SECTION 2: HAZARDS IDENTIFICATION 2.1 Classification of the substance or mixture: Caution: Due to the existence of neutralisation ( 5 < pH < 9) between the product's components, the hazards in terms of corrosion potential are not individually provided for the substances. CLP Regulation (EC) nº 1272/2008: Classification of this product has been carried out in accordance with CLP Regulation (EC) nº 1272/2008. Aquatic Chronic 2: Hazardous to the aquatic environment, long-term hazard, Category 2, H411 Asp. Tox. 1: Aspiration hazard, Category 1, H304 Flam. Liq. 3: Flammable liquids, Category 3, H226 STOT RE 1: Specific target organ toxicity by inhalation, repeated exposure, Category 1, H372 STOT SE 3: Specific toxicity causing drowsiness and dizziness, single exposure, Category 3, H336 2.2 Label elements: CLP Regulation (EC) nº 1272/2008: Danger Hazard statements: Bleko Chemie BV Aquatic Chronic 2: H411 - Toxic to aquatic life with long lasting effects Asp.
    [Show full text]
  • An Nnual L Que 2017- Estion -2021 Nnair Re
    OIL ANNNUAL QUESTIONNAIRE 2017-2021 AND HISTORICAL REVISIONS July 2019 Attached is the annual questionnaire for oil which provides for the submission of 2017--2021 data and historical revisions where applicable. Countries reporting to the IEA are requested to complete the questionnaire at the latest by 30 September. Earlier submissions are welcome. Countries reporting to Eurostat are requested to complete the questionnaire by 30 November (Regulation (EC) No 1099/2008 on energy statistics). Earlier submiissions are welcome. Please send your questionnaire to: • International Energy Agency (IEA/OECD), Ennergy Data Centre (the IEA will forward the data to the United Nations Economic Commission for Europe in Geneva). • European Commission, Eurostat, Energy Statistics (for EU Member States, European Economic Area countries, EU Candidate Countriies and Potential Candidates, Energy Community Contracting Parties) • United Nations Statistics Division, Energy Statistics Section Transmission details are provided in the “Data communication procedures” section. ANNUAL OIL QUESTIONNAIRE Data Communication Procedures IEA 9 rue de la Fédération, 75739, Paris, Cedex 15, France Please complete data for your country on the Energy Validation Outlet: https://evo.iea.org Alternatively send the completed questionnaire to the IEA in a CSV or Excel file as an e-mail attachment to [email protected] For questions regarding the questionnaire, contact [email protected]. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Eurostat European Commission – Eurostat, Unit E.5: Energy, L-2920 Luxembourg (for EU Member States, European Economic Area countries, EU Candidate Countries and Potential Candidates, Energy Community Contracting Parties) The completed MS Excel file questionnaire should be transmitted via the Single Entry Point following the implementing procedures of EDAMIS (Electronic Data Files Administration And Management Information System): https://webgate.ec.europa.eu/edamis selecting the electronic data collection ENERGY_PETRO_A.
    [Show full text]