WSD43 6.6K DWT White Oil Tanker

Total Page：16

File Type：pdf, Size：1020Kb

WSD43 6.6K 6,600 DWT White Oil Tanker DATASHEET Design highlights SPECIFICATION IN BRIEF Length over all 108.00 m Draught, design 6.00 m t Tanker for white oil t Five pairs of cargo tanks, plus Gross tonnage 5,500 t Single decked, single screw motor one pair of slop tanks by means Net tonnage 1,800 ship with machinery of transverse bulkheads and CL Deadweight, max 6,600 t longitudinal bulkhead t Double bottom and double skin in Service speed 12.6 knots way of cargo tank region t Space-optimized accommodation arrangement t Superior hull lines, CFD optimized Operation area “Worldwide” and proven by extensive model t Unrestricted ocean services and testing terminals compatible with vessel’s Cargo segregation 10 cargo tanks dimensions t Meeting EEDI Phase I, between t Optional ice class M/E fuel consumption Jan 01, 2015 to Dec 3, 2019 (@Td, Service speed, 85% CMCR, 15% SM) requirements MDO cons 10.2 t/day 07 / 2016 Fig.1 Detailed elavation drawings TECHNICAL SPECIFICATION MAIN DIMENSIONS CARGO EQUIPMENT PROPULSION / MACHINERY Length over all. ....................................108.00 m t 4FHSFHBUJPO Y DBSHPUBOLT t TUSPLF)BOTIJO.BJO&OHJOF Length PP ...........................................102.00 m t $BSHPQVNQT DFOUSJGVHBM YN3/hr Y L8-)- Breadth moulded ...................................19.20 m t 4USJQQJOHTZTUFN YN3/hr t TUSPLF(FOFSBUJOHTFUT Depth moulded, to main deck. ................9.30 m t %JTDIBSHFSBUF TJNVMU N3/hr 3 x 350kwe Design draught ........................................6.00 m t '11SPQFMMFS YEJBN Deadweight .............................................6,600 t FUEL CONSUMPTION t &NFSHFODZEJFTFMHFOFSBUPS YLXF (Service speed, design draft, 15% SM) SPEED & ENDURANCE Fuel consumption, (-D/G) ....................... 10.2 t/d Service speed ........................................ 12.6 kts Fuel consumption, (+D/G) ......................13.1 t/d CLASSIFICATION (Td, @85% MCR, 15% SM) NS* (TOB, PSPC-WBT) (ESP) (BWTS) (NC) (IWS) MNS* Endurance, service speed (MDO) ..........7,000 nm ACCOMMODATION *OTUBMMBUJPODIBSBDUFS$)( .11 -4" 3$' "'4 t QFSTPOTJOTJOHMFDBCJO GVMMZBJSDPOEJUJPOFE CAPACITIES (100%) or equivalent Cargo tanks (excl. slop), ........................8,500 m³ Slop tanks ................................................250 m³ MDO ........................................................400 m³ BW ........................................................3,400 m³ FW ...........................................................250 m³ wartsila.com/shipdesign [email protected] WÄRTSILÄ® is a registered trademark. Copyright © 2016 Wärtsilä Corporation. Specifications are subject to change without prior notice. WSD ID: 60100.

Copy Link

Recommended publications

Malacca-Max the Ul Timate Container Carrier
MALACCA-MAX THE UL TIMATE CONTAINER CARRIER Design innovation in container shipping 2443 625 8 Bibliotheek TU Delft . IIIII I IIII III III II II III 1111 I I11111 C 0003815611 DELFT MARINE TECHNOLOGY SERIES 1 . Analysis of the Containership Charter Market 1983-1992 2 . Innovation in Forest Products Shipping 3. Innovation in Shortsea Shipping: Self-Ioading and Unloading Ship systems 4. Nederlandse Maritieme Sektor: Economische Structuur en Betekenis 5. Innovation in Chemical Shipping: Port and Slops Management 6. Multimodal Shortsea shipping 7. De Toekomst van de Nederlandse Zeevaartsector: Economische Impact Studie (EIS) en Beleidsanalyse 8. Innovatie in de Containerbinnenvaart: Geautomatiseerd Overslagsysteem 9. Analysis of the Panamax bulk Carrier Charter Market 1989-1994: In relation to the Design Characteristics 10. Analysis of the Competitive Position of Short Sea Shipping: Development of Policy Measures 11. Design Innovation in Shipping 12. Shipping 13. Shipping Industry Structure 14. Malacca-max: The Ultimate Container Carrier For more information about these publications, see : http://www-mt.wbmt.tudelft.nl/rederijkunde/index.htm MALACCA-MAX THE ULTIMATE CONTAINER CARRIER Niko Wijnolst Marco Scholtens Frans Waals DELFT UNIVERSITY PRESS 1999 Published and distributed by: Delft University Press P.O. Box 98 2600 MG Delft The Netherlands Tel: +31-15-2783254 Fax: +31-15-2781661 E-mail: [email protected] CIP-DATA KONINKLIJKE BIBLIOTHEEK, Tp1X Niko Wijnolst, Marco Scholtens, Frans Waals Shipping Industry Structure/Wijnolst, N.; Scholtens, M; Waals, F.A .J . Delft: Delft University Press. - 111. Lit. ISBN 90-407-1947-0 NUGI834 Keywords: Container ship, Design innovation, Suez Canal Copyright <tl 1999 by N. Wijnolst, M .
[Show full text]
International Convention on Tonnage Measurement of Ships, 1969
No. 21264 MULTILATERAL International Convention on tonnage measurement of ships, 1969 (with annexes, official translations of the Convention in the Russian and Spanish languages and Final Act of the Conference). Concluded at London on 23 June 1969 Authentic texts: English and French. Authentic texts of the Final Act: English, French, Russian and Spanish. Registered by the International Maritime Organization on 28 September 1982. MULTILAT RAL Convention internationale de 1969 sur le jaugeage des navires (avec annexes, traductions officielles de la Convention en russe et en espagnol et Acte final de la Conf rence). Conclue Londres le 23 juin 1969 Textes authentiques : anglais et fran ais. Textes authentiques de l©Acte final: anglais, fran ais, russe et espagnol. Enregistr e par l©Organisation maritime internationale le 28 septembre 1982. Vol. 1291, 1-21264 4_____ United Nations — Treaty Series Nations Unies — Recueil des TVait s 1982 INTERNATIONAL CONVENTION © ON TONNAGE MEASURE MENT OF SHIPS, 1969 The Contracting Governments, Desiring to establish uniform principles and rules with respect to the determination of tonnage of ships engaged on international voyages; Considering that this end may best be achieved by the conclusion of a Convention; Have agreed as follows: Article 1. GENERAL OBLIGATION UNDER THE CONVENTION The Contracting Governments undertake to give effect to the provisions of the present Convention and the annexes hereto which shall constitute an integral part of the present Convention. Every reference to the present Convention constitutes at the same time a reference to the annexes. Article 2. DEFINITIONS For the purpose of the present Convention, unless expressly provided otherwise: (1) "Regulations" means the Regulations annexed to the present Convention; (2) "Administration" means the Government of the State whose flag the ship is flying; (3) "International voyage" means a sea voyage from a country to which the present Convention applies to a port outside such country, or conversely.
[Show full text]
International Convention on Tonnage Measurement of Ships, 1969
Page 1 of 47 Lloyd’s Register Rulefinder 2005 – Version 9.4 Tonnage - International Convention on Tonnage Measurement of Ships, 1969 Tonnage - International Convention on Tonnage Measurement of Ships, 1969 Copyright 2005 Lloyd's Register or International Maritime Organization. All rights reserved. Lloyd's Register, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as the 'Lloyd's Register Group'. The Lloyd's Register Group assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register Group entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. file://C:\Documents and Settings\M.Ventura\Local Settings\Temp\~hh4CFD.htm 2009-09-22 Page 2 of 47 Lloyd’s Register Rulefinder 2005 – Version 9.4 Tonnage - International Convention on Tonnage Measurement of Ships, 1969 - Articles of the International Convention on Tonnage Measurement of Ships Articles of the International Convention on Tonnage Measurement of Ships Copyright 2005 Lloyd's Register or International Maritime Organization. All rights reserved. Lloyd's Register, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as the 'Lloyd's Register Group'. The Lloyd's Register Group assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register Group entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
[Show full text]
Shipbuilding
Shipbuilding A promising rst half, an uncertain second one 2018 started briskly in the wake of 2017. In the rst half of the year, newbuilding orders were placed at a rate of about 10m dwt per month. However the pace dropped in the second half, as owners grappled with a rise in newbuilding prices and growing uncertainty over the IMO 2020 deadline. Regardless, newbuilding orders rose to 95.5m dwt in 2018 versus 83.1m dwt in 2017. Demand for bulkers, container carriers and specialised ships increased, while for tankers it receded, re ecting low freight rates and poor sentiment. Thanks to this additional demand, shipbuilders succeeded in raising newbuilding prices by about 10%. This enabled them to pass on some of the additional building costs resulting from higher steel prices, new regulations and increased pressure from marine suppliers, who have also been struggling since 2008. VIIKKI LNG-fuelled forest product carrier, 25,600 dwt (B.Delta 25), built in 2018 by China’s Jinling for Finland’s ESL Shipping. 5 Orders Million dwt 300 250 200 150 100 50 SHIPBUILDING SHIPBUILDING KEY POINTS OF 2018 KEY POINTS OF 2018 0 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Deliveries vs demolitions Fleet evolution Deliveries Demolitions Fleet KEY POINTS OF 2018 Summary 2017 2018 Million dwt Million dwt Million dwt Million dwt Ships 1,000 1,245 Orders 200 2,000 m dwt 83.1 95.5 180 The three Asian shipbuilding giants, representing almost 95% of the global 1,800 orderbook by deadweight, continued to ght ercely for market share.
[Show full text]
SIMPLIFIED MEASUREMENT TONNAGE FORMULAS (46 CFR SUBPART E) Prepared by U.S
SIMPLIFIED MEASUREMENT TONNAGE FORMULAS (46 CFR SUBPART E) Prepared by U.S. Coast Guard Marine Safety Center, Washington, DC Phone (202) 366-6441 GROSS TONNAGE NET TONNAGE SAILING HULLS D GROSS = 0.5 LBD SAILING HULLS 100 (PROPELLING MACHINERY IN HULL) NET = 0.9 GROSS SAILING HULLS (KEEL INCLUDED IN D) D GROSS = 0.375 LBD SAILING HULLS 100 (NO PROPELLING MACHINERY IN HULL) NET = GROSS SHIP-SHAPED AND SHIP-SHAPED, PONTOON AND CYLINDRICAL HULLS D D BARGE HULLS GROSS = 0.67 LBD (PROPELLING MACHINERY IN 100 HULL) NET = 0.8 GROSS BARGE-SHAPED HULLS SHIP-SHAPED, PONTOON AND D GROSS = 0.84 LBD BARGE HULLS 100 (NO PROPELLING MACHINERY IN HULL) NET = GROSS 1. DIMENSIONS. The dimensions, L, B and D, are the length, breadth and depth, respectively, of the hull measured in feet to the nearest tenth of a foot. See the conversion table on the back of this form for converting inches to tenths of a foot. LENGTH (L) is the horizontal distance between the outboard side of the foremost part of the stem and the outboard side of the aftermost part of the stern, excluding rudders, outboard motor brackets, and other similar fittings and attachments. BREADTH (B) is the horizontal distance taken at the widest part of the hull, excluding rub rails and deck caps, from the outboard side of the skin (outside planking or plating) on one side of the hull, to the outboard side of the skin on the other side of the hull. DEPTH (D) is the vertical distance taken at or near amidships from a line drawn horizontally through the uppermost edges of the skin (outside planking or plating) at the sides of the hull (excluding the cap rail, trunks, cabins, deck caps, and deckhouses) to the outboard face of the bottom skin of the hull, excluding the keel.
[Show full text]
GUIDANCE MANUAL for TONNAGE SURVEYS of VESSELS up to 24 Metres (LENGTH)
International Institute of Marine Surveying GUIDANCE MANUAL FOR TONNAGE SURVEYS OF VESSELS UP TO 24 Metres (LENGTH) Page 1 of 19 IIMS Tonnage Survey Manual - Jan 2017 V3 © IIMS CERTIFYING AUTHORITY 2017 Contents Page 3 Introduction Page 4 Who can undertake Tonnage Surveys through the IIMS? Page 5 Tonnage survey process Page 6 Tonnage Survey process Information required for completion of the certificate of survey. Name of ship UK Ports of choice Page 7 Tonnage Survey process Other Red Ensign Flags Official number HIN/CIN Year built Page 8 Tonnage Survey process Type of ship Ship power Builder’s name and address Construction material Date of survey Place of survey Measurement interpretations Definition of Length Overall Page 9 Diagrams of LOA aft and forward measurement points Definition of Length Definition of Breadth Page 10 Breadth Diagrams Definition of Depth Page 11 Definition of Depth continued. Depth diagrams Page 12 Depth lower terminal points and diagrams Page 13 Break definition and example diagrams Page 14 Multihulls and Breaks definition including example diagrams Page 15 Multihulls and Breaks definition including example diagrams continued Page 16 Rigid Inflatables (RIB) and diagram Page 17 Tonnage calculations Measurer’s contact details Particulars of propelling engines Page 18 Suggested equipment for carrying out a Tonnage Survey Further advice Page 19 Appendices Appendix 1 The Merchant Shipping (Tonnage) Regulations 1997 Appendix 2 MGN 527: Tonnage Measurement Clarification of Procedures for Multihulls Page 2 of 19 IIMS Tonnage Survey Manual - Jan 2017 V3 © IIMS CERTIFYING AUTHORITY 2017 Introduction The IIMS CA (Certifying Authority) is approved by the MCA to undertake Tonnage Measurements on vessels of up to 24m ‘Length’ for British Registration.
[Show full text]
Determirjiation of the Compensated Gross Tonnage Factors for Superyachts
International Shipbuilding Progress 57 (2010) 127-146 127 DOI 10.3233/ISP-2010-0066 lOS Press Determirjiation of the Compensated Gross Tonnage factors for superyachts Jeroen FJ. Pruyn Robert G. Helckenberg ^ and Chris M. van Hooren^ ^ Delft University of Technology, Delft, The Netherlands ^ Supeiyacht Builders Association, Delft, The Netherlands In order to provide the basis for a fair comparison, an indicator was developed to measure the amount of work that goes into the construction of a vessel. The foundation for this Compensated Gross Tonnage was laid in the 1970s by the OECD to compensate for the differences in work involved in producing a gross ton (GT) of ship in different sizes and types. Since 2007, the CGT of a vessel of a certain type as a function of its size (measured in GT) has been expressed as CGT = A x GT-®. However, no interna tionally accepted A and B values exist to convert superyachts from GT to CGT. The superyacht building industry believes that this omission results in an under appreciation of the importance of the sector. This paper describes the research carried out into this subject and confirms that the cuiTent assignments for su peryachts greatly under appreciate the value of the sector. Based on the current data, the most appropriate values for superyachts are 278 for A and 0.58 for B. The spread is quite large and more data would help confirm this finding. Keywords: CGT, superyachts, shipbuilding 1. Background: CGT factors To compare the output of shipyards and shipbuilding industries using the size of delivered vessels (e.g., in terms of Gross Tonnage) alone is insufficient: how does one compare a (very large) crude oil tanker to a (smaller but much more complex) passenger ship? In order to provide the foundation for a fair comparison, an indicator was de veloped to measure the amount of work that goes into the construction of a ves sel: Compensated Gross Tonnage.
[Show full text]
Measurement of Fishing
35 Rapp. P.-v. Réun. Cons. int. Explor. Mer, 168: 35-38. Janvier 1975. TONNAGE CERTIFICATE DATA AS FISHING POWER PARAMETERS F. d e B e e r Netherlands Institute for Fishery Investigations, IJmuiden, Netherlands INTRODUCTION London, June 1969 — An entirely new system of The international exchange of information about measuring the gross and net fishing vessels and the increasing scientific approach tonnage was set up called the to fisheries in general requires the use of a number of “International Convention on parameters of which there is a great variety especially Tonnage Measurement of in the field of main dimensions, coefficients, propulsion Ships, 1969” .1 data (horse power, propeller, etc.) and other partic ulars of fishing vessels. This variety is very often caused Every ship which has been measured and marked by different historical developments in different in accordance with the Convention concluded in Oslo, countries. 1947, is issued with a tonnage certificate called the The tonnage certificate is often used as an easy and “International Tonnage Certificate”. The tonnage of official source for parameters. However, though this a vessel consists of its gross tonnage and net tonnage. certificate is an official one and is based on Inter In this paper only the gross tonnage is discussed national Conventions its value for scientific purposes because net tonnage is not often used as a parameter. is questionable. The gross tonnage of a vessel, expressed in cubic meters and register tons (of 2-83 m3), is defined as the sum of all the enclosed spaces. INTERNATIONAL REGULATIONS ON TONNAGE These are: MEASUREMENT space below tonnage deck trunks International procedures for measuring the tonnage tweendeck space round houses of ships were laid down as follows : enclosed forecastle excess of hatchways bridge spaces spaces above the upper- Geneva, June 1939 - International regulations for break(s) deck included as part of tonnage measurement of ships poop the propelling machinery were issued through the League space.
[Show full text]
Branch's Elements of Shipping/Alan E
‘I would strongly recommend this book to anyone who is interested in shipping or taking a course where shipping is an important element, for example, chartering and broking, maritime transport, exporting and importing, ship management, and international trade. Using an approach of simple analysis and pragmatism, the book provides clear explanations of the basic elements of ship operations and commercial, legal, economic, technical, managerial, logistical, and financial aspects of shipping.’ Dr Jiangang Fei, National Centre for Ports & Shipping, Australian Maritime College, University of Tasmania, Australia ‘Branch’s Elements of Shipping provides the reader with the best all-round examination of the many elements of the international shipping industry. This edition serves as a fitting tribute to Alan Branch and is an essential text for anyone with an interest in global shipping.’ David Adkins, Lecturer in International Procurement and Supply Chain Management, Plymouth Graduate School of Management, Plymouth University ‘Combining the traditional with the modern is as much a challenge as illuminating operations without getting lost in the fascination of the technical detail. This is particularly true for the world of shipping! Branch’s Elements of Shipping is an ongoing example for mastering these challenges. With its clear maritime focus it provides a very comprehensive knowledge base for relevant terms and details and it is a useful source of expertise for students and practitioners in the field.’ Günter Prockl, Associate Professor, Copenhagen Business School, Denmark This page intentionally left blank Branch’s Elements of Shipping Since it was first published in 1964, Elements of Shipping has become established as a market leader.
[Show full text]
Panamax - Wikipedia 4/20/20, 1018 AM
Panamax - Wikipedia 4/20/20, 1018 AM Panamax Panamax and New Panamax (or Neopanamax) are terms for the size limits for ships travelling through the Panama Canal. General characteristics The limits and requirements are published by the Panama Canal Panamax Authority (ACP) in a publication titled "Vessel Requirements".[1] Tonnage: 52,500 DWT These requirements also describe topics like exceptional dry Length: 289.56 m (950 ft) seasonal limits, propulsion, communications, and detailed ship design. Beam: 32.31 m (106 ft) Height: 57.91 m (190 ft) The allowable size is limited by the width and length of the available lock chambers, by the depth of water in the canal, and Draft: 12.04 m (39.5 ft) by the height of the Bridge of the Americas since that bridge's Capacity: 5,000 TEU construction. These dimensions give clear parameters for ships Notes: Opened 1914 destined to traverse the Panama Canal and have influenced the design of cargo ships, naval vessels, and passenger ships. General characteristics New Panamax specifications have been in effect since the opening of Panamax the canal in 1914. In 2009 the ACP published the New Panamax Tonnage: 120,000 DWT specification[2] which came into effect when the canal's third set of locks, larger than the original two, opened on 26 June 2016. Length: 366 m (1,201 ft) Ships that do not fall within the Panamax-sizes are called post- Beam: 51.25 m (168 ft) Panamax or super-Panamax. Height: 57.91 m (190 ft) The increasing prevalence of vessels of the maximum size is a Draft: 15.2 m (50 ft) problem for the canal, as a Panamax ship is a tight fit that Capacity: 13,000 TEU requires precise control of the vessel in the locks, possibly resulting in longer lock time, and requiring that these ships Notes: Opened 2016 transit in daylight.
[Show full text]
Documentation and Tonnage of Smaller Commercial Vessels
Documentation and Tonnage of Smaller Commercial Vessels This informational brochure provides an overview of federal documentation and tonnage measurement requirements for owners of U.S. commercial vessels less than 79 feet in overall length. If you own such a vessel, certain restrictions on its commercial use may apply depending on a number of factors, including the nature of its commercial activities, the vessel’s net tonnage, and whether the vessel was U.S. built. Vessel Documentation What is vessel documentation? Vessel documentation is a national form of vessel registration, evidenced by a Certificate of Documentation (COD) issued by the Coast Guard’s National Vessel Documentation Center (NVDC). It is one of the oldest functions of the federal government, dating back to the 11th Act of the First Congress of September 1, 1789. Documentation provides evidence of nationality for international purposes, facilitates commerce between the states, and admits vessels to certain restricted trades, such as coastwise trade and the fisheries. Since 1920, vessel financing has been enhanced through the availability of preferred mortgages on documented vessels. Must my commercial vessel be documented? This depends on both the nature of the commercial activities in which your vessel engages and its net tonnage. Vessels which engage in either coastwise trade, or the fisheries on navigable waters of the United States or in the Exclusive Economic Zone (EEZ), must be documented, subject to certain exclusion or exemption provisions. Vessels of less than five net tons are excluded from documentation. Those vessels measuring five net tons or more that do not operate in either the coastwise trade or the fisheries on the navigable waters of the United States or in the fisheries in the EEZ, are Exclusive Economic Zone exempt from documentation.
[Show full text]
Tendency Toward Mega Containerships and the Constraints of Container Terminals
Journal of Marine Science and Engineering Article Tendency toward Mega Containerships and the Constraints of Container Terminals Nam Kyu Park 1,* and Sang Cheol Suh 2 1 Department of International Logistics, Tongmyong University, Busan 48520, Korea 2 Institute of Port & Logistics Industry, Busan 48520, Korea; [email protected] * Correspondence: [email protected]; Tel.: +82-010-3575-1004 Received: 25 February 2019; Accepted: 17 April 2019; Published: 6 May 2019 Abstract: This paper focuses on the coping ability of the existing container terminals when mega containerships call at a port. The length of 30,000 TEU (Twenty Equivalent Unit) ships are predicted to be 453 m and occupy 498 m of a quay wall. As a result, the length of berth should be more than a minimum of 500 m. If a 25,000 TEU ship or 30,000 TEU ship call at a terminal, the outreach of QC (Quay Crane) should be a minimum 74.3 m or 81.0 m respectively. As mega ships are calling at the port, the ship waiting time, the available stacking area, and the number of handling equipment can be limited. The analysis reveals that larger ships wait for longer than the smaller ones because they have diﬃculty allocating the proper seat on berth. As a result of the survey in a terminal, the average occupancy is shown to be 60.4%, the minimum is 52.4%, and the maximum is 73.3%. Surveying the monthly equipment operation rate for 3 years, the average is 85.8%, the minimum is 80.1%, and the maximum is 90.1%.
[Show full text]