III. Curriculum Vita Devin K. Harris, Ph.D. DEVIN K. HARRIS, PH.D. 351 McCormick Rd Phone: (434) 924-6373 Charlottesville, VA 22904-4742 E-mail: dharris@.edu www.uva-moblab.com

Professional Experience Associate Professor July 2016 – present Charlottesville, VA

Director of Center for Transportation Studies July 2017 – present University of Virginia Charlottesville, VA

Faculty Director of Clark Scholars Program February – present University of Virginia Charlottesville, VA

Assistant Professor July 2012 – June 2016 University of Virginia Charlottesville, VA

Assistant Professor January 2008 – June 2012 Adjunct Assistant Professor July 2012 – August 2015 Michigan Technological University Houghton, MI Appointment: Donald F. and Rose Ann Tomasini Assistant Professor in Structural Engineering

Graduate Research Assistant January 2003 – December 2007 Virginia Polytechnic Institute and State University Blacksburg, VA

Sr. Project Engineer June 2001 – November 2002 ExxonMobil Development Company – Business Planning Houston, TX

Project Engineer December 1999 – June 2001 ExxonMobil Development Company – U.S. West Drilling Houston, TX

Project Engineer July 1999 – December 1999 Exxon Company U.S.A. – U.S. Drilling Group New Orleans, LA

Education Doctor of Philosophy, Civil Engineering 2007 Virginia Polytechnic Institute and State University Dissertation: Evaluation of the Sandwich Plate System (SPS) for use in Virginia Bridges

Master of Science, Civil Engineering 2004 Virginia Polytechnic Institute and State University Thesis: Characterization of Punching Shear Capacity of Thin Ultra-High Performance Concrete Plates

Bachelor of Science, Civil Engineering (honors) 1999 University of Florida

III-1 III. Curriculum Vita Devin K. Harris, Ph.D. a) Names of Ph.D. Advisors: • Thomas E. Cousins, Ph.D., P.E. (Primary Advisor) and Thomas M. Murray, Ph.D., P.E. b) Starting date: • July 2, 2012 c) Substantial honors and awards: • Finalist (2014) - University of Virginia CHARGE – Tournament of Ideas • Outstanding Reviewer (2013) - American Society of Civil Engineering – Journal of Bridge Engineering • Excellence in Diversity Fellowship (2012-2013) – University of Virginia • Young Member Award for Professional Achievement (2011) – American Concrete Institute • Howard E. Hill Outstanding Faculty Member (2008-09) – Department of Civil and Environmental Engineering, Michigan Technological University • Transportation Structures and Materials Student Paper Award - 54th Virginia Transportation Conference (2005) o “Characterization of Punching Shear Capacity of Thin UHPC Slabs” • NSF IGERT Fellowship – Macromolecular Science and Engineering (2004 – 2007) -Virginia Polytechnic Institute and State University • Charles Via Ph.D. Fellowship (2004-2007) - Virginia Polytechnic Institute and State University • Charles Via Master’s Fellowship (2003-2004) - Virginia Polytechnic Institute and State University • Graduate Dean’s Fellowship (2003-2004) - Virginia Polytechnic Institute and State University d) Graduate Students directed/being directed (chronological by degree year & institution): Michigan Technological University M.S. Students • Russell Lutch o Thesis: Capacity Optimization of A Prestressed Concrete Railroad Tie o Degree Award Year: 2009 o First job after graduation: Kiewit • Jayeeta Sarkar o Thesis: Characterization of the Bond Strength Between Ultra High Performance Concrete Bridge Deck Overlays and Concrete Substrates o Degree Award Year: 2010 o First job after graduation: Ph.D. - Michigan State University • Kevin Mears o Thesis: Structural Capacity of Steel Tubular Cast-in-Place Piling o Degree Award Year: 2011 o First job after graduation: Black and Veatch

III-2 III. Curriculum Vita Devin K. Harris, Ph.D. • Seth Johnson o Thesis: Non-thesis o Degree Award Year: 2012 o First job after graduation: Larson Engineering • Sarah Shann o Thesis: Application of Ultra High Performance Concrete (UHPC) as a Thin-Bonded Overlay for Concrete Bridge Decks o Degree Award Year: 2012 o First job after graduation: Wiss, Janney, Elstner Associates, Inc. • Miguel Angel Carbonell Muñoz o Thesis: Compatibility of Ultra High Performance Concrete as a Repair Material: Bond Characterization with Concrete Under Different Loading Scenarios o Degree Award Year: 2012 o First job after graduation: DeSimone Consulting Engineers

University of Virginia Doctoral Students • Amir Gheitasi o Dissertation: Performance Evaluation of Damage Integrated Girder Bridges o Qualifying Exam: August 2011 o Proposal Defense: October 2013 o Final Defense: July 2014 o Degree Award Year: 2014* o First job after graduation: Post-Doctoral Research Associate – University of Virginia *Recipient of 2014-2015 UVa CEE Award for Excellence in Research • Mohamad Alipour (August 2014 start) o Dissertation: Deep Learning for Robust and Efficient Automated Defect Recognition in Critical Infrastructure o Qualifying Exam: January 2017 o Proposal Defense: April 2018 o Anticipated Defense: May 2019 • Mehrdad Dizaji (August 2015 start) o Dissertation: Image-Based Structural Health Monitoring (iSHM) o Qualifying Exam: April 2018 o Proposal Defense: November 2018 o Anticipated Defense: May 2019 • Tianshu Li (August 2017 start) o Dissertation: Hybrid Data-Driven Approach for Structural Health Monitoring (tentative) o Qualifying Exam: May 2018 o Proposal Defense: Planned May 2019 o Anticipated Defense: TBD • Ciara Horne (August 2018 start) o Dissertation: TBD o Qualifying Exam: TBD o Proposal Defense: TBD o Anticipated Defense: TBD

III-3 III. Curriculum Vita Devin K. Harris, Ph.D.

M.S. Students • John Civitillo o Thesis: In-Service Performance and Behavior Characterization of the Hybrid Composite Bridge System o Degree Award Year: 2014 o First job after graduation: Naval Sea Systems Command (NAVSEA) • Mark Saliba o Degree Award Year: Anticipated ~ December 2014 o Thesis: Performance Evaluation of Damaged Prestressed Girder Bridges o First job after graduation: Freyssinet, Inc. • Lauren Bolton o Degree Award Year: May 2015 o Thesis: Bridge Condition Characterization Using Optical and Thermal Sensors o First job after graduation: Facility Engineering Associates • Jonathan Tanks o Degree Award Year: May 2015 o Thesis: Anchorage Systems for Carbon Fiber Composite Cables and Carbon Rods o First job after graduation*: Ph.D.–Tokyo Institute of Technology–Chemical Engineering (*Awarded Ministry of Education, Culture, Sports, Science, and Technology (MEXT) Fellowship to pursue Ph.D. in Japan) • Mohamad Shawki Amine o Degree Award Year: May 2015 o Thesis: Non-thesis (ME) o First job after graduation: AECOM • Evelina Khakimova o Degree Award Year: May 2016 o Thesis: Investigation of Fiber Reinforced Concrete Properties: High Early Strength, Toughness, Permeability and Fiber Distribution o First job after graduation: AECOM • Savannah Washlesky o Degree Award Year: Planned May 2019 o Thesis: Image-Based Approaches for Bridge Deflection Measurement o First job after graduation: Parsons

e) List of undergraduate theses supervised: • Jonathan Tanks, Miranda Tuell, Ahmad Elhajj, and Bradley James (Spring 2013) o “An Educational Guide for Structural Engineering Students: Designing for the American Institute of Steel Construction 2013 Student Steel Bridge Competition” • Joe Torp, Nicholas Goddeau, Sam Kush, Stuart Williams, and Paul Buonocore (Spring 2014) o “An Educational Guide for Structural Engineering Students: Designing for the American Institute of Steel Construction 2013 Student Steel Bridge Competition” • Ryan Fiesta, Nick Shaffer, Tom Schofield, Evan Weihs, Thomas Williams, and Cory Zimmerman (Spring 2015) o “Design and Execution for the AISC/ASCE Steel Bridge Competition Per 2015 Rules”

III-4 III. Curriculum Vita Devin K. Harris, Ph.D. • Adam Maguire (Spring 2015) o Thesis: “A Comparison of the Error Regime of 2-Dimensional Digital Image Correlation Analytical Methods” • Kyle Brendel, Evan Chappell, Malina Dana, Nick Farias, Christy Haney, Hannah Luer, Jeremy Mason, and Nina Vascotto (Spring 2016) o “2016 UVA Student Steel Bridge Competition” • Syed Kazmi, Isabel Kigo, Hee Ya Pyo, and Michela Rossi (Spring 2017) o “2017 UVA Student Steel Bridge Competition” • Evan Lesmez, Emily Melinis, and Nicholas Mikalauskas (Spring 2018) o “Leveraging Mobile Sensing to Enable a Quality of Life within Smart and Connected Community” • Raunak Bhattarai, Colin Moore, Chistopher Suasa, Riley Savering, Emily Xu (Spring 2019) o “Leveraging Mobile Sensing Within Smart and Connected Communities” - selected as Civil Engineering Department top team-based project (Fall 2018)

f) Visitors and postdoctoral fellows supervised: Michigan Technological University • Yogini Deshpande, Ph.D. (2009-2010) University of Virginia • Amir Gheitasi, Ph.D. (2014-2015) • Abdollah Bagheri, Ph.D. (2015-2017) • Shuzhen Yang (August 2017-August 2018) o Visiting PhD student - Beijing Jiaotong University, China • Ke Chen (August 2018-present) o Visiting Scholar - Bridge and Tunnel Technology Research Center Research Institute of Highway - Ministry of Transport of P.R. China

III-5 III. Curriculum Vita Devin K. Harris, Ph.D. g) External research grants and contracts (see also section j): Awarded Project: Performance Characteristics of In-Service Bridges for Enhancing Load Ratings: Leveraging Refined Analysis Methods Role: Principal Investigator (Co-PI: Osman Ozbulut) Award: $226,548 (2017-2018) Sponsor: Virginia Transportation Research Council

Project: Development of a Test Method to Determine the Source of Staining on Structures Role: Principal Investigator Award: $74,750 (2018-2019) Sponsor: Virginia Transportation Research Council

Project: Research to Support VDOT's Bridge Management System Role: Principal Investigator Award: $55,389 (2018-2019) Sponsor: Virginia Transportation Research Council

Project: Continued Monitoring of the Varina-Enon Bridge- Response to Special Permit Loads Role: Principal Investigator Award: $24,623 (2018-2019) Sponsor: Virginia Transportation Research Council

Project: Enabling Effective Decision Making from Crowdsourcing Applications for Civil Infrastructure Systems Role: Co-Principal Investigator (PI: Jon Goodall) Award: $10,000 (2018-2019) Sponsor: MainStreet21 RCN National Science Foundation Grant

Project: Leveraging deep learning to extract flooding extent from remote sensing imagery Role: Co-Principal Investigator (PI: Jon Goodall) Award: $60,000 (2018-2019) Sponsor: University of Virginia – 3 Cavaliers

Project: Virginia Local Technical Assistance Program (Virginia LTAP) Role: Principal Investigator (CTS Training Grant) Award: $301,838 (2018-2019) Sponsor: Federal Highway Administration and Virginia Transportation Research Council

Project: National Tribal Technical Assistance Program NTTAP Role: Principal Investigator (CTS Training Grant) Award: $4,660,000 (2017-2019) Sponsor: Federal Highway Administration

Project: Live Load Testing Hybrid Composite Bridge System Route 205 Over Tides Mill Stream Bridge System on Route 205 over Tide Mill Stream

III-6 III. Curriculum Vita Devin K. Harris, Ph.D. Role: Principal Investigator Award: $41,063 (2017-2018) Sponsor: Virginia Transportation Research Council

Project: Extending Image and Video Based Measurement to Characterize Global Structural Response of Highway Infrastructure Components Role: PI Award: $35,559 (2017-2018) Sponsor: Mid-Atlantic Transportation Sustainability Center – University Transportation Center (VTRC Match)

Project: Image-Based Response Measurement for Reference-Free Deflection and Deformation Monitoring of Highway Structural Systems Role: PI Award: $35,559 (2016-2017) Sponsor: Mid-Atlantic Transportation Sustainability Center – University Transportation Center (VTRC Match)

Project: Preserving Coastal Infrastructure through the Design and Implementation of Image- Based Structural Health Monitoring (iSHM) Role: PI Award: $150,435 (2016-2018) Sponsor: Mid-Atlantic Transportation Sustainability Center – University Transportation Center

Project: Load Rating Strategies for Bridges with Missing or As-Built Information – Phase II Role: Principal Investigator (Co-PI: Osman Ozbulut) Award: $247,726 (2016-2018) Sponsor: Virginia Center for Transportation Innovation and Research

Project: Evaluation of Five Spans of the Bridge Tunnel Role: PI (Collaborators: Carin Roberts-Wollmann and Matt Hebdon ) Award: $50,587 [$125,000 total] (2016) Sponsor: Virginia Transportation Research Council – Virginia Department of Transportation

Project: Accelerating the Use of Sustainable Materials Role: PI (Co-PI: Osman Ozbulut) Award: $102,254 (2015-2016) Sponsor: Mid-Atlantic Transportation Sustainability Center – University Transportation Center

Project: University of Virginia Center for Infrastructure Renewal and Advanced Materials Role: PI (Co-PI: Osman Ozbulut) Award: $217,587 (2015-2016) Sponsor: Virginia Center for Transportation Innovation and Research

Project: Gaining Early Awareness and Readiness for Undergraduate Programs (GEAR UP) Role: Sub-contractor (Co-PI: J. Chris Carroll - University of Louisiana at Lafayette)

III-7 III. Curriculum Vita Devin K. Harris, Ph.D. Project Value: $1,888,723 Award: $105,032 (2019 – 2020) – Awarded 2014 Sponsor: U.S. Department of Education

Project: Structural Enhancements to Adapt to Impacts of Climate Change Role: Co-Principal Investigator (PI: Osman Ozbulut) Award: $134,767 (2014-2016) Sponsor: Mid-Atlantic Transportation Sustainability Center – University Transportation Center

Project: Load Rating Strategies for Bridges with Missing or As-Built Information Role: Principal Investigator (Co-PI: Osman Ozbulut) Award: $289,078 (2014-2016) Sponsor: Virginia Center for Transportation Innovation and Research

Project: Investigation of Fiber Reinforced Concrete Properties: High Early Strength, Toughness, Permeability and Fiber Distribution Role: Principal Investigator Award: $99,379 (2014-2016) Sponsor: Virginia Center for Transportation Innovation and Research

Project: Anchorage Systems for Carbon Fiber Composite Cables and Carbon Rods Role: Principal Investigator Award: $72,413+2015 supplement: $24,996 = $97,409 (2013-present) Sponsor: Virginia Center for Transportation Innovation and Research

Project: University of Virginia Center for Infrastructure Renewal and Advanced Materials Role: Director (Co-Director: Osman Ozbulut) Award: $39,974 + 2014 renewal: $49,901 = $89,875 (2013-2014) Sponsor: Virginia Center for Transportation Innovation and Research

Project: In-service Performance Evaluation and Monitoring of the Hybrid Composite Beam Bridge System on Route 205 over Tide Mill Stream Role: Principal Investigator Award: $85,557 (2012-2014) Sponsor: Virginia Center for Transportation Innovation and Research

Project: Cross-Infrastructure Learnings for Alternative Bridge System Designs - A Case Study on the Hybrid Composite Bridge System Sponsor: National University Rail Center (NURail) Role: Principal Investigator Award: $38,840 (2012-present)

Project: Structural Health Monitoring to Determine Long-term Behavior of AFRP Composite Bars in Prestressed Concrete Panels for Field Deployment Role: Co-Principal Investigator (PI: Monique Head – Morgan State University) Award: $187,000 ($50,000 - UVA) (2012-present) Sponsor: Mid-Atlantic University Transportation Center – Collaborative Grant*

III-8 III. Curriculum Vita Devin K. Harris, Ph.D.

Project: Mid-Atlantic University Transportation Center* Sponsor: U.S. Department of Transportation Research Innovation & Technology Administration Role: Co-PI (Principal Investigators: Michael Demetsky and Emily Parkany - UVA) Lead Institution: Penn State University • Internal Project: Performance Evaluation of Damage Integrated Girder Bridges ($91,397) • Internal Project: Bridge Condition Characterization Using Optical & Thermal Sensors ($149,784) Award: $600,000 (UVA sub-award) (2012-present) - $241, 181 (Harris component) Sponsor: Mid-Atlantic University Transportation Center – Base Award*

*The Mid-Atlantic University Transportation Center (MATUC) is a collaborative center funded through the U.S. Department of Transportation for the AASHTO Region III. The center was funded through a national competition and awarded to the project team lead by Penn State University (participants: UVA, Virginia Tech, University of Maryland, University of West Virginia, and Morgan State University). The center allows for transportation research in areas of interest to the Mid-Atlantic Region. The resources from MAUTC include a base allocation of funds for each participating university and additional funds for collaborative research activities amongst the partner institutions. Internal projects were supported through base funding.

Michigan Technological University Project: Center for Structural Durability (CSD) 2011 Role: Associate Director (Director: Tess Ahlborn) Award: $48,000 (2011-2012) Sponsor: Michigan Department of Transportation

Project: Remote Sensing for Bridge Condition Assessment Role: Co-Principal Investigator (PI: Tess Ahlborn) Award: $2,842,100 (2010-2012) Sponsor: Department of Transportation: Research and Innovative Technology Administration

Project: Evaluation of Constructed, Cast-in-Place (CIP) Piling Properties Role: Principal Investigator Award: $90,000 (2009-2011) Sponsor: Wisconsin Highway Research Program (Wisconsin Department of Transportation)

Project: Center for Structural Durability (CSD) 2010 Role: Associate Director (Director: Tess Ahlborn) Award: $47,999 (2010-2011) Sponsor: Michigan Department of Transportation

Project: Development of Wireless Sensors for Infrastructure Material Health Monitoring Role: Principal Investigator Award: $22,054 (2009-2011) Sponsor: Michigan Tech Research Excellence Fund (State of Michigan)

III-9 III. Curriculum Vita Devin K. Harris, Ph.D. Project: Center for Structural Durability (CSD) 2009 Role: Associate Director (Director: Tess Ahlborn) Award: $47,999 (2009-2010) Sponsor: Michigan Department of Transportation

Project: Synthesis of Railroad Engineering Best Practices in Areas of Deep Seasonal Frost and Permafrost Role: Co-Principal Investigator (PI: Pasi Lautala) Award: $301,156 (2008-2011) Sponsor: University of Alaska Fairbanks

III-10 III. Curriculum Vita Devin K. Harris, Ph.D. h) Bibliography of books and refereed publications (see also section j): Refereed Journal Publications 1) Alipour, M., Washlesky, S. J., and Harris, D. K. (2019). "Field Deployment and Laboratory Evaluation of 2D Digital Image Correlation for Deflection Sensing in Complex Environments." Journal of Bridge Engineering, 24(4), 04019010. (p) – IF: 1.069 2) Bagheri, A., Ozbulut, O. E., Harris, D. K., Alipour, M., and Zare Hosseinzadeh, A. (2018). "A Experimental-numerical Approach for Load Rating of Reinforced Concrete Bridges with Insufficient Structural Properties." Structure and Infrastructure Engineering. (p) – IF: 1.202 3) Ozbulut, O. E., Jiang, Z., and Harris, D. K. (2018). "Exploring scalable fabrication of self- sensing cementitious composites with graphene nanoplatelets." Smart Materials and Structures, 27(11), 115029. (c) – IF: 2.963 4) Shafiei Dizaji, M., Alipour, M., and Harris, D. K. (2018). "Leveraging Full-Field Measurement from 3D Digital Image Correlation for Structural Identification." Experimental Mechanics - Special Publication [invited], 58(7), 1049-1066. (p) – IF: 2.091 5) Bagheri, A., Alipour, M. Ozbulut, O.E., and Harris, D.K. (2018). "A Nondestructive Method for Load Rating of Bridges without Structural Properties and Plans." Engineering Structures, 171, 545-556. (p) – IF: 1.893 6) Bagheri, A., Alipour, M., Ozbulut, O.E., and Harris, D.K. (2018). "Identification of Flexural Rigidity in Skewed Concrete Slab Bridges with Limited Structural Information." Journal of Structural Engineering, 144(8), 04018126. (p) - IF: 1.700 7) Harris, D. K., Hansen, M. E., and Gheitasi, A. (2018). "Describing the Failure Characteristics of Concrete Derived from Standard ASTM Testing - An Illustration of Full- Field Measurement using 3D Digital Image Correlation." Journal of Testing and Evaluation. (p) - IF: 0.423 8) Gheitasi, A., Harris, D. K., and Hansen, M. E. (2018). "An Experimental-Computational Correlated Study for Describing the Failure Characteristics of Concrete across Two Scale Levels: Mixture and Structural Component." Experimental Mechanics, 58(1), 11-32. (p) – IF: 2.091 9) Sherif, M., Khakimova, E., Ozbulut, O. E., Harris, D. K., and Ozyildirim, H. C. (2017). "Behavior of Mortar and Concrete Beams with Randomly Distributed Superelastic SMA Fibers." Journal of Intelligent Material Systems and Structures, 1045389X17721029. (c) – IF: 2.255 10) Bagheri, A., Ozbulut, O.E., and Harris, D.K. (2017). "Structural system identification based on variational mode decomposition." Journal of Sound and Vibration, Volume 417(March 2018), 182-197. (p) - IF: 2.593 11) Alipour, M., Harris, D. K., Barnes, L. E., Ozbulut, O. E., and Carroll, J. (2017). "Load Capacity Rating of Bridge Populations through Machine Learning: An Application of Decision Trees and Random Forests." Journal of Bridge Engineering, 22(10). (p) - IF: 1.069 12) Khakimova, E., H.C. Ozyildirim, and D.K. Harris (2017). "Investigation of High Performance Fiber Reinforced Concrete Properties: Very Early Strength, Toughness, Permeability, and Fiber Distribution." Transportation Research Record: Journal of the Transportation Research Board, 2629 (Concrete Materials), 73-82. (p) – IF: 0.522 13) Tanks, J. D., Sharp, S. R., and Harris, D. K. (2016). "Kinetics of in-plane shear degradation in carbon/epoxy rods from exposure to alkaline and saline environments." Composites Part B: Engineering. (p) – IF: 3.850

III-11 III. Curriculum Vita Devin K. Harris, Ph.D. 14) Tanks, J. D., Sharp, S., Harris, D. K., and Ozyildirim, C. (2016). "Durability of CFRP cables exposed to simulated concrete environments." Advanced Composite Materials. (p) – IF: 1.029 15) Gheitasi, A., Ozbulut, O. E., Usmani, S., Alipour, M., and Harris, D. K. (2016). "Experimental and analytical vibration serviceability assessment of an in-service footbridge." Case Studies in Nondestructive Testing and Evaluation, 6, Part A, 79-88. (s) – IF: unavailable 16) Tanks, J. D., Harris, D. K., and Sharp, S. R. (2016). "Mechanical response of unidirectional composite bars loaded in transverse compression." Composites Part B: Engineering, 97, 18- 25. (p) – IF: 3.850 17) Tanks, J. D., Sharp, S. R., and Harris, D. K. (2016). "Charpy Impact Testing to Assess the Quality and Durability of Unidirectional CFRP Rods." Polymer Testing, 51, 63-68. (p) – IF: 2.350. 18) Harris, D.K., Brooks, C.N., and Ahlborn, T.M. (2016) “Synthesis of Field Performance of Remote Sensing Strategies for Condition Assessment of In-Service Bridge in Michigan” ASCE Journal of Performance of Constructed Facilities, 10.1061/(ASCE)CF.1943- 5509.0000844, 04016027. (p) – IF: 0.893 19) Harris, D.K., Civitillo, J., and Gheitasi, A. (2016) – “Performance and Behavior of Hybrid Composite Beam Bridge in Virginia - Live Load Testing.” ASCE Journal of Bridge Engineering. (p) - IF: 1.069 20) Gheitasi, A., and Harris, D.K. (2015). “Redundancy and Operational Safety of Composite Stringer Bridges with Deteriorated Girders.” Journal of Performance of Constructed Facilities, 10.1061/(ASCE)CF.1943-5509.0000764 , 04015022. (p)– IF: 0.893 21) Gheitasi, A., and Harris, D.K. (2015) “Performance Assessment of Steel-Concrete Composite Bridges with Subsurface Deck Delamination.” Structures, 2, p. 8-20. (p)– IF: unavailable 22) Gheitasi, A., and Harris, D.K. (2015) “Overload Flexural Distribution Behavior in Composite Steel Girder Bridges.” Journal of Bridge Engineering, 20(5), 04014076. (p) – IF: 1.069 23) Gheitasi, A., and Harris, D.K. (2015) “Failure Characteristics and Ultimate Load-Carrying Capacity of Redundant Composite Steel Girder Bridges: Case Study.” Journal of Bridge Engineering, 20(3), 05014012. (p) – IF: 1.069 24) Gheitasi, A., and Harris, D.K. (2015) “Implications of Overload Distribution Behavior on Load Rating Practices in Steel Stringer Bridges.” Transportation Research Record, Journal of the Transportation Research Board – Structure 2015, TRR No. 2522, 47-56. (p) – IF: 0.522 25) Harris, D.K., Carbonell, M.A., Gheitasi, A., Ahlborn, T.M. and Rush, S. (2014) “Challenges of Interface Bond Characterization of Ultra-High Performance Concrete - A Study for Applications in Bridge Rehabilitation Practices.” Advances in Civil Engineering Materials, 4(2), ACEM20140034. [Invited Paper] (p)– IF: unavailable 26) Carbonell, M.A., Harris, D.K., Ahlborn, T.M., and Froster, D.C. (2014) “Bond Performance between Ultra-High Performance Concrete and Normal Strength Concrete”, ASCE – Journal of Materials in Civil Engineering, 26(8), 04014031. (p) – IF: 1.295 27) Vaghefi, K., Ahlborn, T.M., Harris, D.K., and Brooks, C.N., (2013) “Combined Imaging Technologies for Concrete Bridge Deck Condition Assessment”, ASCE – Journal of Performance of Constructed Facilities, 29(5), 04014102. (c) – IF: 0.893

III-12 III. Curriculum Vita Devin K. Harris, Ph.D. 28) Harris, D.K. and Gheitasi, A., (2013). "Implementation of an Energy-Based Stiffened Plate Formulation for Lateral Load Distribution Characteristics of Girder-Type Bridges”, Elsevier - Engineering Structures, 54, 168-179. (p) – IF: 1.893 29) Harris, D.K., Gheitasi, A., Ahlborn, T.M., and Mears, K.A. (2013). “Evaluation of Constructed, Steel Tubular, Cast-in-Place (CIP) Piling Properties”, Transportation Research Record, Journal of the Transportation Research Board – Soil Mechanics, TRR No. 2363, 36-46. (p) – IF: 0.522 30) Ahlborn, T.M., Vaghefi, K., Harris, D.K., Brooks, C.N. (2012). "Measuring and Communicating Bridge Performance with Remote Sensing Technologies". Transportation Research Record, Journal of the Transportation Research Board – Maintenance and Preservation 2012, TRR No. 2292, 141-149. (c) – IF: 0.522 31) Vaghefi, K., Oats, R., Harris, D. K., Ahlborn, T. M., Brooks, C. N., Endsley, K. A., Roussi, C., Shuchman, R., Burns, J. W., Dobson, R. (2012). "Evaluation of Commercially Available Remote Sensors for Highway Bridge Condition Assessment". ASCE Journal of Bridge Engineering – Special Issues: Nondestructive Evaluation and Testing for Bridge Inspection and Evaluation, 17(6), 886-895. (c) – IF: 1.069 32) Harris, D.K. (2012). "Component Sizing Approach for the Sandwich Plate System (SPS)." Structure and Infrastructure Engineering: Maintenance, Management, Life-Cycle Design and Performance, 8(12),1160-1172. (p) – IF: 1.202 33) Harris, D.K., Sarkar, J., and Ahlborn, T.M. (2011). "Characterization of Interface Bond of Ultra-High-Performance Concrete Bridge Deck Overlays." Transportation Research Record, Journal of the Transportation Research Board – Concrete Materials 2011, TRR No. 2240, 40-49. (p) – IF: 0.522 34) Ahlborn, T.M., Harris, D.K., Misson, D.L., and Peuse, E.J. (2011). "Characterization of Strength and Durability of Ultra-High-Performance Concrete Under Variable Curing Conditions." Transportation Research Record – Design of Structures, Journal of the Transportation Research Board Structures 2011, TRR No. 2251, 68-75. (c) – IF: 0.522 35) Harris, D.K., Lutch, R.H., Ahlborn, T.M., and Duong, P. (2011). "Optimization of a Prestressed Concrete Railroad Crosstie for Heavy-Haul Applications." ASCE Journal of Transportation Engineering, 137(11), 815-822. (p) – IF: 0.801 36) Harris, D.K., Cousins, T., Sotelino, E.D., and Murray, T.M. (2010). "Flexural lateral load distribution characteristics of Sandwich Plate System bridges, a parametric investigation." ASCE Journal of Bridge Engineering, 15(6), 684-694. (p) – IF: 1.069 37) Harris, D.K. (2010). "Assessment of flexural lateral load distribution methodologies for stringer bridges." Engineering Structures, 32(11), 3443-3451. (p) – IF: 1.893 38) Harris, D.K., Cousins, T., Murray, T.M., and Sotelino, E.D. (2008). "Field Investigation of a Sandwich Plate System bridge deck." ASCE Journal of Performance of Constructed Facilities, 22(5), 1-11. (p) – IF: 0.893 Refereed Journal Articles Under Review 1) Alipour, M., and Harris, D. K. (2019 - submitted). "Adapting Deep Learning Models for Robust Infrastructure Crack Detection in Different Materials." Engineering Structures (under review). (p) 2) Alipour, M., Harrs, D. K., and Miller, G. R. (2019 - submitted). "Robust Pixel-Level Crack Detection Using Deep Fully Convolutional Neural Networks " ASCE - Journal of Computing in Civil Engineering (under review). (p)

III-13 III. Curriculum Vita Devin K. Harris, Ph.D. Refereed Conference Proceedings 1) Bagheri, A., Harris, D. K., and Ozbulut, O. E. "Structural Monitoring and Damage Detection Using High-speed Vibration Imaging " Proc., Structures Congress 2018 Structural Engineering Institute, Dallas, TX. (c) 2) Ndong, A. K., Dizaji, M. S., Alipour, M., Ozbulut, O. E., and Harris, D. K. "Load Rating of a Reinforced Concrete T-Beam Bridge Through Ambient Vibration Testing and Finite Element Model Updating." Proc., IMAC-XXXVI Conference & Exposition on Structural Dynamics, Springer International Publishing, Orlando, FL, 337-343. (p) 3) Ndong, A. K., Ozbulut, O. E., and Harris, D. K. "Identifying Modal Characteristics of Reinforced Concrete Bridges Using Smartphones." Proc., IMAC-XXXVI Conference & Exposition on Structural Dynamics, Springer International Publishing, Orlando, FL, 345- 354. (c) 4) Shafiei Dizaji, M., Harris, D. K., Alipour, M., and Ozbulut, O. E. (2018) “Reframing Measurement for Structural Health Monitoring: A Full-Field Strategy for Structural Identification.” Proc. SPIE Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XII 2018, 10599, Denver, CO. (p) 5) Yang, S., Shafiei Dizaji, M., and Harris, D. K. (2018) “Comparative Performance Assessment of Response-Only Modal Identification Algorithms for a Skewed Concrete Highway Bridge.” Proc. SPIE, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2018, 10598, Denver, CO. (p) 6) Shafiei Dizaji, M., Harris, D. K., Alipour, M., and Ozbulut, O. E. (2017) “En“vision”ing a Novel Approach for Structural Health Monitoring – A Model for Full-Field Structural Identification using 3D-Digital Image Correlation.” Proc., 8th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Brisbane, Australia. (p) 7) Ndong, A. K., Bagheri, A., Ozbulut, O. E., and Harris, D. K. (2017) “Comparative Performance Assessment of Response-Only Modal Identification Algorithms for a Skewed Concrete Highway Bridge.” Proc., 8th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Brisbane, Australia. (p) 8) Shafiei Dizaji, M., Harris, D. K., and Alipour, M. “A Local/Global Approach to Structural Identification Using 3D Digital Image Correlation.” Proc., 2017 International Digital Image Correlation Society (IDICS) Workshop and Conference, International Digital Image Correlation Society, Barcelona, Spain. (p) 9) Alipour, M., Harris, D. K., and Barnes, L. E. (2017). "Pattern Recognition in the National Bridge Inventory for Automated Screening and Assessment of Infrastructure." SEI Structures Congress, Denver, CO. (p) 10) Alipour, M., Rahai, A., and Harris, D. K. (2017). "Numerical Investigation of Shear Buckling and Post-buckling of Thin Steel Plates with FRP Strengthening." SEI Structures Congress, Denver, CO. (c) 11) Bagheri, A., Alipour, M., Usmani, S., Ozbulut, O. E., and Harris, D. K. (2017). "Structural stiffness estimation of skewed slab bridges from vibration data." IMAC-XXXV Conference & Exposition on Structural Dynamics, Garden Grove, CA. (c) 12) Harris, D. K., Alipour, M., Acton, S. T., Messeri, L. R., Vaccari, A., and Barnes, L. E. (2017). "The Citizen Engineer: Urban Infrastructure Monitoring Via Crowd-Sourced Data Analytics." SEI Structures Congress, Denver, CO. (p)

III-14 III. Curriculum Vita Devin K. Harris, Ph.D. 13) Jiang, Z., Ozbulut, O. E., and Harris, D. K. (2017). "Effect of Mixing Method on Piezoresistive Behavior of Self-sensing Mortar Composites with Graphene Nanoplatelets." Proc., Transportation Research Board 96th Annual Meeting, Transportation Research Board, Washington, DC. (c) 14) Khakimova, E., Ozyildirim, H. C., and Harris, D. K. (2017). "Investigation of High Performance Fiber Reinforced Concrete Properties: Very Early Strength, Toughness, Permeability, and Fiber Distribution." Transportation Research Board (TRB) 96th Annual Meeting, Transportation Research Board, Washington, DC. (p) 15) Dizaji, M. S., Alipour, M., and Harris, D. K. (2016). "Leveraging Vision for Structural Identification: A Digital Image Correlation Based Approach." International Digital Image Correlation Society 2016 Conference and Workshop/SEM Fall Conference, Philadelphia, PA. (p) 16) Bagheri, A., Ozbulut, O. E., and Harris, D. K. (2016). "Dynamic Characterization of Civil Structures Based on the Variational Mode Decomposition Method." Engineering Mechanics Institute Conference, Nashville, TN. (c) 17) Jiang, Z., Ozbulut, O. E., and Harris, D. K. (2016). "Graphene nanoplatelets-based self- sensing cementitious composites." ASME 2016 Smart Materials, Adaptive Structures and Intelligent Systems, Stowe, VT. (c) 18) Pavgi, R., Jiang, Z., Ramniceanu, A., Ozbulut, O. E., and Harris, D. K. (2016). "Self- sensing cementitious composites with graphene nanoplatelets." International Concrete Sustainability Conference, Washington, D.C. (c) 19) Alipour, M., Usmani, S., Harris, D.K., and Ozbulut, O.E. (2016). " Vibration Testing for Bridge Load Rating." IMAC-XXXIV Conference & Exposition on Structural Dynamics, Orlando, FL. (p) 20) Gheitasi, A., Usmani, S., Alipour, M., Ozbulut, O.E., and Harris, D.K. (2016). "Vibration Serviceability Assessment of a Pedestrian Bridge Under Human-Induced Excitations." IMAC-XXXIV Conference & Exposition on Structural Dynamics, Orlando, FL. (s) 21) Alipour, M., Gheitasi, A., Harris, D.K., Ozbulut, O.E., and Barnes, L.E. (2016). "A Data- Driven Approach for Automated Operational Safety Evaluation of the National Inventory of Reinforced Concrete Slab Bridges." Transportation Research Board (TRB) 95th Annual Meeting, Washington, D.C. (p) 22) Khakimova, E.M., Sherif, M.M., Tanks, J.D., Ozbulut, O.E., Harris, D.K., and Ozyildirim, H.C. (2016). "Feasibility of Using Shape Memory Alloys as Fiber Reinforcement in Concrete." Transportation Research Board (TRB) 95th Annual Meeting, Washington, D.C. (s) 23) Tanks, J.D., Sharp, S.R., Harris, D.K., and Ozyildirim, C. (2016). " Durability of Carbon Fiber Reinforced Polymer (CFRP) Strands in a Concrete Environment." Transportation Research Board (TRB) 95th Annual Meeting, Washington, D.C. (p) 24) Khakimova, E.M., Sherif, M.M., Tanks, J.D., Ozbulut, O.E., Harris, D.K., and Ozyildirim, H.C. (2015). " Preliminary Experimental Investigations on Shape Memory Alloy Fiber." 6th International Conference on Advances in Experimental Structural Engineering, Urbana- Champaign, IL. (s) 25) Harris, D.K., Gheitasi, A., and Civitillo, J. M. (2015). “Field Testing and Numerical Simulation of a Hybrid Composite Beam Bridge in Virginia.”16th European Bridge Conference, Edinburgh, UK. (p)

III-15 III. Curriculum Vita Devin K. Harris, Ph.D. 26) Harris, D.K., Ozbulut, O., Alipour, M., Kassner, B.L., and Usmani, S. (2015). “Implications of Load Rating Bridges in Virginia with Limited Design or As-Built Details.” 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Torino, Italy. (p) 27) Harris, D.K., Gheitasi, A., and Saliba, M. (2015). “Implications for Structural Health Monitoring and Load Rating Resulting from the Performance of Damage Integrated Bridges.” 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Torino, Italy. (p) 28) Gheitasi, A., and Harris, D.K. (2015). “Integration of element inspection data in model updating and performance evaluation of in-service bridge superstructures.” SEI Structures Congress, Portland, OR. (p) 29) Amine, M.S., Tanks, J., Harris, D.K., and Head, M. (2015). “Environmental Effects on Material and Bond Durability of CFRP and AFRP for Prestressed Concrete Bridge Applications.” SEI Structures Congress, Portland, OR. (p) 30) Saliba M., Harris, D.K., and Gheitasi, A. (2015). “Influence of internal deterioration mechanisms on the system-level behavior of composite prestressed concrete girder bridges.” SEI Structures Congress, Portland, OR. (p) 31) Gheitasi, A., and Harris, D.K. (2015). “Implications of overload distribution behavior on load rating practices in steel stringer bridges.” Transportation Research Board (TRB) 94th Annual Meeting, Washington, D.C. (p) 32) Civitillo, J. M., Harris, D.K., Gheitasi, A., Saliba M., and Kassner, B.L. (2014) “In-service Performance and Behavior Characterization of the Hybrid Composite Bridge System – A Case Study.” 9th International Conference on Short and Medium Span Bridges, Calgary, Alberta, Canada. (p) 33) Gheitasi, A., and Harris, D.K. (2014) “Effect of Deck Deterioration on Overall System Behavior, Resilience and Remaining Life of Composite Steel Girder Bridges.” SEI Structures Congress, Boston, MA. (p) 34) Gheitasi, A., and Harris, D.K. (2014) “A Performance-Based Framework for Bridge Preservation Based on Damage-Integrated System-Level Behavior.” Transportation Research Board (TRB) 93nd Annual Meeting, Washington, D.C. (p) 35) Oats, R.C., Harris, D.K., Ahlborn, T.M., and de Melo e Silva, H. (2012). “Evaluation of the Digital Image Correlation Method as a Structural Damage Assessment and Management Tool”, Transportation Research Board (TRB) 92nd Annual Meeting, Washington, D.C. (c) 36) Harris, D.K., Gheitasi, A., Ahlborn, T.M., and Mears, K.A. (2012). “Evaluation of Constructed, Steel Tubular, Cast-in-Place (CIP) Piling Properties”, Transportation Research Board (TRB) 92nd Annual Meeting, Washington, D.C. (p) 37) Vaghefi, K., Ahlborn, T.M., Harris, D.K., and Brooks, C.N. (2012). “Implementation of Thermal Infrared Imagery for Highway Concrete Bridge Decks,” NDE/NDT for Highways & Bridges: Structural Materials Technology (SMT) Conference 2012, New York NY. (c) 38) Hoensheid, R.C., Dean, D., Brooks, C.N., Harris, D.K., Ahlborn, T.M., and Dobson, R. (2012). “The Evaluation of Surface Defect Detection using LiDAR for Bridge Structural Health Monitoring” NDE/NDT for Highways & Bridges: Structural Materials Technology (SMT) Conference 2012, New York NY. (c) 39) Endsley, K.A., Brooks, C.N., Ahlborn, T.M., Harris, D.K., and Vaghefi, K. (2012). “Utilization of Remote Sensing Data for Bridge Condition in Operational Decision

III-16 III. Curriculum Vita Devin K. Harris, Ph.D. Support,” NDE/NDT for Highways & Bridges: Structural Materials Technology (SMT) Conference 2012, New York NY. (c) 40) Carbonell, M.A., Harris, D.K., Shann, S.V., Ahlborn, T.M. (2012). “Interface Bond Characterization of Ultra-High Performance Concrete with Normal Strength Concrete for Bridge Overlays”, HiPerMat 2012 - 3rd International Symposium on Ultra-High Performance Concrete & Nanotechnology for Construction Materials, Kassel, Germany. (p) 41) Shann, S.V., Harris, D.K., Carbonell, M.A., Ahlborn, T.M. (2012). “Implementation of Ultra-High Performance Concrete (UHPC) as a Thin-Topped Overlay for Concrete Bridge Decks”, HiPerMat 2012 - 3rd International Symposium on Ultra-High Performance Concrete & Nanotechnology for Construction Materials, Kassel, Germany. (p) 42) Flietstra, J.C., Ahlborn, T.M., Harris, D.K., de Melo e Silva, H.A. (2012). “Creep and Shrinkage Behavior of Ultra High Performance Concrete under Compressive Loading with Varying Curing Regimes”, HiPerMat 2012 - 3rd International Symposium on Ultra-High Performance Concrete & Nanotechnology for Construction Materials, Kassel, Germany. (i) 43) Kreiger, E.L., Ahlborn, T.M., Harris, D.K., de Melo e Silva, H. (2012). “Characterization of the Fracture Behavior of UHPC under Flexural Loading”, HiPerMat 2012 - 3rd International Symposium on Ultra-High Performance Concrete & Nanotechnology for Construction Materials, Kassel, Germany. (i) 44) Endsley, K.A., Brooks, C.N., Harris, D.K., Ahlborn, T.M. (2012). "Remote Sensing of Bridge Condition for Asset Management Decision Support", SPIE Smart Structures/NDE 2012: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems International Society for Optics and Photonics, San Diego, CA. (c) 45) Ahlborn, T.M., Vaghefi, K., Harris, D.K., Brooks, C.N. (2011). "Measuring and Communicating Bridge Performance with Remote Sensing Technologies". Transportation Research Board (TRB) 91st Annual Meeting, Washington, D.C. (c) 46) Vaghefi, K., de Melo e Silva, H.A., Harris, D.K., Ahlborn, T.M. (2011). "Application of Thermal IR Imagery for Concrete Bridge Inspection". PCI National Bridge Conference, Precast/Prestressed Concrete Institute, Salt Lake City, UT. (c) 47) Brooks, C.N., Ahlborn, T.M., Harris, D.K., Sutter, L., Schuchman, R., Burns, J., Endsley, K., Vaghefi, K., Roussi, C., Dobson, R., Hoensheid, R., (2011). “Assessing Bridge Condition using Remote Sensing”, 18th William T. Pecora Memorial Remote Sensing Symposium, U.S. Geological Survey (USGS) and National Aeronautics and Space Administration (NASA), Herndon, VA. (c) 48) Ahlborn, T.M., Harris, D.K., Brooks, C.N., and Sutter, L.L., (2011). "Integration of Traditional and Non-Traditional Remote Sensing for Bridge Condition Assessment" 5th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Cancun, Mexico. (c) 49) Harris, D.K., Sarkar, J., and Ahlborn, T.M. (2011). "Interface Bond Characterization of Ultra-High Performance Concrete Overlays." Transportation Research Board (TRB) 90th Annual Meeting, Washington, D.C. (p) 50) Ahlborn, T.M., Harris, D.K., Misson, D.L., and Peuse, E.J. (2011). "Strength and Durability Characterization of Ultra-High Performance Concrete Under Variable Curing Conditions." Transportation Research Board (TRB) 90th Annual Meeting, Washington, D.C. (i) 51) Ahlborn, T.M., Harris, D.K., Brooks, C.M., Endsley, K.A., Evans, D.C., and Oats, R.C. (2010). "Evaluation of Remote Sensing Technologies for Detecting Bridge Deterioration

III-17 III. Curriculum Vita Devin K. Harris, Ph.D. and Condition Assessment." NDE/NDT for Highways and Bridges: Structural Materials Technology (SMT), New York, NY. (c) 52) Harris, D.K. (2010). "Evaluation of a Stiffened Plate Approach for Lateral Load Distribution Characteristics of Short and Medium Span Bridges." International Conference on Short & Medium Span Bridges, Niagara Fall, ON. (p) 53) Deshpande, Y., Harris, D.K., Mukherjee, A., and Waghchaure, A. (2010). "Using Embedded Wireless Sensor Networks to Monitor and Predict Behavior of Concrete Members." International Federation for Structural Concrete (fib) / PCI Annual Convention, Washington, D.C. (p) 54) Lutch, R.H., Harris, D.K., and Ahlborn, T.M. (2009). "Prestressed Concrete Ties in North America." 2010 AREMA Annual Conference and Exposition, AREMA, Chicago, IL. (p) 55) Lutch, R.H., Harris, D.K., and Ahlborn, T.M. (2009). "Causes and Preventative Methods for Railseat Abrasion in North America's Railroads." 14th Conference on Cold Regions Engineering, ASCE, Duluth, MN. (p) 56) Harris, D.K., and Roberts-Wollmann, C.L. (2008). "Characterization of punching shear capacity of thin ultra-high performance concrete slabs." 2nd International Symposium on Ultra High Performance Concrete, Kassel University Press, Kassel, Germany, 727-734. (p) 57) Harris, D.K., Cousins, T., Murray, T.M., and Ferro, A. (2006). "Live load test of a SPS bridge." 6th International Conference on Short & Medium Span Bridges, Montreal, QC. (p) 58) Harris, D.K., and Roberts-Wollmann, C.L. (2005). "Characterization of Punching Shear Capacity of Thin UHPC Slabs." 54th Virginia Transportation Conference, Roanoke,VA. (p) Technical Reports 1) Tanks, J.D., Sharp, S.R., Harris, D.K., and Ozyildirim, C. (2015). “Durability of Carbon Fiber Reinforced Polymer (CFRP) Strands in a Concrete Environment”. Virginia Center for Transportation Innovation and Research, Project 8966-15. (p) 2) Harris, D.K., and Civitillo, J. (2014). “In-Service Performance Evaluation and Monitoring of the Hybrid Composite Beam Bridge System on Route 205 over Tides Mill Stream”. Virginia Center for Transportation Innovation & Research, Project 0205-096-101,B601. (p) 3) Ahlborn, T.M., Shuchman, R.A., Sutter, L.L., Harris, D.K., Brooks, C.N., and Burns, J.W., (2013). “Bridge Condition Assessment Using Remote Sensors.” United States Department of Transportation – Research and Innovation Technology Administration, Cooperative Agreement Number DT0S59-10-H-00001. (c) 4) Lautala, P., Harris, D.K., Ahlborn, Alkire, B., Hodek, R., (2012). “Synthesis of Railroad Engineering Best Practices in Areas of Deep Seasonal Frost and Permafrost.” State of Alaska – University of Alaska Fairbanks, Final Contract Report. (c) 5) Harris, D.K., Ahlborn, T.M., Mears, K., and Gheitasi, A. (2011). “Evaluation of Constructed, Cast-in- Place (CIP) Piling Properties.” Wisconsin Highway Research Program – Wisconsin Department of Transportation, Report WHRP 11-07. (p) 6) Ahlborn, T.M., and Harris, D.K. (2010). “Michigan Department of Transportation Center for Structural Durability 2010.” Michigan Department of Transportation. Final Contract Report. (c) 7) Ahlborn, T.M., and Harris, D.K. (2009). “Michigan Department of Transportation Center for Structural Durability 2009.” Michigan Department of Transportation. Final Contract Report. (c)

III-18 III. Curriculum Vita Devin K. Harris, Ph.D. 8) Cousins, T., Harris, D.K., Murray, T.M., and Gomez, J.P. (2009). "Use of a sandwich plate system in a Virginia bridge." Virginia Transportation Research Council. Final Contract Report 09-CR12. (i) 9) Harris, D.K., and Roberts-Wollmann, C.L. (2005). "Characterization of the punching shear capacity of thin ultra-high performance concrete slabs." Virginia Transportation Research Council. Final Contract Report 05-CR26. (i) Categories (p) – primary supervisor (c) – co-supervisor (i) – involved in another capacity __ – advised students

III-19 III. Curriculum Vita Devin K. Harris, Ph.D. i) Invited talks: • Harris, D.K. (2016). “Defining Performance of In-Service Transportation Structures – Linking Condition and Behavior within a Structural Health Monitoring Framework”, University of Central Florida Department of Civil and Environmental Seminar, Orlando, FL. • Harris, D.K. (2016). “The Vision Sensor – Integration of Image-Based Measurements as a Sensing Scheme for Structural Health Monitoring”, University of Florida Engineering School of Sustainable Infrastructure and Environment Seminar, Gainesville, FL. • Harris, D.K. (2015). “iSHM – Design and Implementation of Image-Based Evaluation as an Enhancement for Structural Health Monitoring”, Florida Agricultural and Mechanical University & Florida State University Department of Civil and Environmental Seminar, Tallahassee, FL. • Harris, D.K. (2015). “A Holistic Approach to Transportation Infrastructure Preservation: Condition, Performance, and Behavior Characterization of Highway Bridges”, University of Michigan Department of Civil and Environmental Graduate Seminar Series, Ann Arbor, MI. • Harris, D.K. (2014). “Applications of Digital Image Correlation in Transportation Infrastructure Evaluation.” 1st International Digital Image Correlation Conference & Workshop, Dublin, Ireland. • Harris, D.K., Carbonell, M.A., Ahlborn, T.M. and Gheitasi, A. (2013) “The Challenges Related Interface Bond Characterization of Ultra-High Performance Concrete.” ASTM C09 Symposium on Ultra-High Performance Concrete, Jacksonville, FL. • Harris, D.K., (2011). “A Framework for Bridge Condition Assessment and Preservation”, Virginia Polytechnic Institute and State University Via Department of Civil and Environmental Graduate Seminar Series, Blacksburg, VA. • Harris, D.K. (2010). "Application of Ultra-High Performance Concrete (UHPC) for sustainable building components. "NSF US-Israel Workshop: Sustainable Buildings – Materials and Energy”, Haifa, Israel. • Harris, D.K., Cousins, T., Sotelino, E.D., and Murray, T.M. (2008). "Lateral load distribution characteristics of the Sandwich Plate System for bridge applications." NSF US-South America Workshop: Innovative Materials for Civil Infrastructure, Santiago, Chile. • Sotelino, E.D., Harris, D.K., Cousins, T., and Murray, T.M. (2008). "Dynamic load allowance in lightweight bridges." NSF US-South America Workshop: Innovative Materials for Civil Infrastructure, Santiago, Chile.

III-20 III. Curriculum Vita Devin K. Harris, Ph.D. j) Patents and copyrights: • None k) Professional service:

University of Virginia University Service • Participated in Leadership in Academic Matters Program (Spring 2018) • USOAR Invited Panelist • Search Committee Chair –Tenure Track Joint Faculty Position – Resilient Cities and Buildings - Civil & Environmental Engineering / Architecture (2015-2016) – successful hire • UVA CHARGE (NSF ADVANCE) – 2014-present o Finalist for Tournament of Ideas § Telecommunity Concept Submitted by CHARGE to Jefferson Trust (Fall 2015) o Panelist for NSF Site Visit o Participant in College of Arts and Sciences Dean Panel Discussion o Participant in UVA Oral History Interview o Member of Implementation Team (Formal Role) • Mentor for Office of Graduate and Post-Doctoral Affairs – The Mentor Institute (2015- present) • Black Faculty and Staff Employee Resource Group o Subcommittee on On-Boarding/Navigating UVA (2016) • Panelist for Tau Theta Chapter of Zeta Phi Beta Sorority “UVa for First Years” Fall 2013 SEAS Service • Faculty Panelist (Interview) for Link Lab Welcome Back (Spring 2019) • Faculty Panelist Engineering Student Council Panel (Spring 2019) • Selected as Inaugural Faculty Director of Clark Scholars Program (Spring 2018) • Awarded Provost’s Phase I Bridging Projects proposal ($95k): “Creating a Collaborative Space to Support a Diverse Student Experience in UVA Engineering” (Fall 2018) • Search Committee Member – Assistant Dean of Undergraduate Education (2018) • Search Committee Member – Chair of Engineering Systems and Environment (2018) • Search Committee Chair – Program Director Clark Scholars (2018) • Search Committee Member – Cyber-Physical System / Smart Cities (2016-2017) • Space Committee (SEAS) – (2016 – present) • Dean’s Research Advisory Committee (SEAS) – (2016 – present) • Participated in Black Engineer of the Year Awards (BEYA) Conference 2017 on behalf of SEAS and CDE (2017) • Center for Diversity in Engineering Bridge Program Faculty Panelist (2015) • ExxonMobil Bernard Harris Science Summer Camp Module o “Building Your Future” (Summer 2014): Morning session for ~50 middle school students. Activities included basics of civil engineering and mechanics, compression testing of concrete, tensile testing of steel, load and deflection calculations and measurement for the ASCE Steel Bridge, and local bridge tour. o “Civil Engineering Playground - The World's Built Environment” (Summer 2015): Morning session for ~48 middle school students. Activities included introductory lesson on the basics of civil engineering, a bridge site visit, and experimental exhibitions on

III-21 III. Curriculum Vita Devin K. Harris, Ph.D. compression testing of concrete, tensile testing of steel, vibration testing of ASCE Steel Bridge, and metrology using digital image correlation – Collaboration with Professor Osman Ozbulut (RAIL). • Participated in Engineering Open House (Spring 2013) • Panel member for Minority Student Open House (Fall 2012 & 2013)

CEE Service • UVa Representative for 10th Annual VDOT Transportation Career Fair for High School Students in Northern Virginia - Manassas, VA (Fall 2014) • Search Committee Chair – Non-Tenure Track Faculty Position – Geotechnical Engineering – Department of Civil and Environmental Engineering (2014) – successful hire • ASCE Steel Bridge Team Faculty Advisor (2012-present): o Participated in Regional Competition: 2012-13 o Participated in Virginias Regional Competition: 2013-14 § First Place in regional competition o Participated in National Competition: 2013-14 o Participated in Virginias Regional Competition: 2014-15 o Participated in Virginias Regional Competition: 2015-16 • Served on Civil and Environmental Engineering – Equipment Trust Fund Committee Summer 2013 (w/ Teresa Culver and Brian Park) • Lead Department of Civil and Environmental Course Fee Proposal “Enhancement to Civil and Environmental Engineering Structural Engineering and Mechanics Laboratory Space for Integrated Teaching and Research”

Michigan Tech • ASCE Steel Bridge Team Faculty Advisor: o Participated in North Central Regional Competition: 2009-12 § 2010-11 Team Placed 1st in Region and 2nd in Nation § 2011-12 Team Placed 1st in Region and 4th in Nation • National Society of Black Engineers - Faculty Advisor: 2010-2012 • Kappa Alpha Psi Fraternity - Faculty Advisor: 2009-10 • PCI Big Beam Competition - Faculty Advisor: 2008-09 • Civil and Environmental Engineering Industry and Alumni Contact Committee • Graduate Student Orientation Facilitator (2009) • Host/Evaluator for Leading Scholars Program (Fall 2011)

Professional • American Concrete Institute o Committee 342 – Evaluation of Concrete Bridges and Bridge Elements (Chair) o SYPAC - Student and Young Professionals – re-appointed (2018) § Board level committee responsible for advising the Board of Direction on issues and strategies for the recruitment and retention of students and young members. o Committee S802 – Teaching Methods and Educational Materials (Secretary) o Committee 444 – Structural Health Monitoring and Instrumentation (Voting) o Committee 343 – Concrete Bridge Design (Associate) o Committee 345 – Concrete Bridge Construction, Maintenance, & Repair (Associate)

III-22 III. Curriculum Vita Devin K. Harris, Ph.D. o Committee 239 – Ultra-High Performance Concrete (Associate) • Transportation Research Board o Committee AFF40 - Field Testing and NDE of Transportation Structures (Member) o Committee AHD30 – Structures Maintenance (Member) • American Society of Civil Engineers • International Digital Image Correlation Society (IDICS) o Applications sub-committee o Education sub-committee • American Institute of Steel Construction • National Society of Black Engineers • Journal Reviewer o Frontiers in Built Environment § Editorial Board of Structural Sensing - Review Editor o ASCE Journal of Bridge Engineering § ASCE Outstanding Reviewer 2013 o ASCE Journal of Materials in Civil Engineering o ASCE Journal of Transportation Engineering o ASCE Journal of Performance of Constructed Facilities o ACI Materials Journal o ACI Structural Journal o Transportation Research Board o Structure and Infrastructure Engineering o Engineering Structures • Book Reviewer o Reinforced Concrete: Mechanics and Design (5th Ed.), MacGregor and Wight (2008), Pearson Publishing. o America's bridges, Kantwell (2008), Nova Publishing. • Conference and Workshop o Panelist for “What I Wish I Knew: Transition into a Faculty Member”: American Concrete Institute Fall Convention (2016) o Session Chair (“Student-Driven Competitions as a Teaching and Learning Tool”): American Concrete Institute Spring Convention (2016). o Session Chair (“SHM Real-Life Applications”): American Concrete Institute Fall Convention (2015). o Session Chair (“Structural Health Monitoring of Long & Short Span Bridges”): 16th European Bridge Conference (2015). o Session Chair (“Risk analysis, monitoring and interdisciplinary strategies for sustainable and resilient infrastructures and urban systems”): 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure (2015). o Session Co-Chair (“Reaching Out to the Next Generation”): American Concrete Institute Spring Convention (2011). o Session Chair: 8th International Conference on Short and Medium Span Bridges (2010) o Conference Moderator: Michigan Bridge Conference (2008 and 2009) o Session Chair: NSF Workshop: Innovative Materials for Civil Infrastructure (2008)

III-23 III. Curriculum Vita Devin K. Harris, Ph.D. Local Community • Elected to Smart Cville Board of Directors (2018) • Participated in 100 Black Men of Central Virginia Scholarship Banquet – 2013 and 2014 • Organized annual ASCE Steel Bridge Demonstration at Houghton Elementary School (Spring 2011 and 2012) • Assistant Coach for SOCA U15 Classic Travel Soccer (Fall 2015 and Spring 2016) • Assistant Coach for SOCA U14 Challenge Soccer (Spring 2014) • Head Soccer Coach for SOCA U12 Recreational Soccer (Fall 2012) • Head Coach - Copper Country Soccer Association o (2009, 2010) – Age Group 8/9 o (2011) – Age Group 10/11 • Copper Country Soccer Associate Board Member (2010-11)

III-24